11:10 p.m.
Hi,
I've done all the recommendations in this thread, and I'm still getting the
"Paused by System" message just after the transfer starts.
Honestly I don't know were else to look at, cause I don't find any log
entry or packet capture that give me a hint about what is happening.
I'll appreciate any help! Thank you in advance!
Regards
Martin
On Thu, Sep 1, 2016 at 5:01 PM, Amit Aviram <aavi...(a)redhat.com> wrote:
You can do both,
Through the database, the table is "vdc_options". change
"option_value"
where "option_name" = 'ImageProxyAddress' .
On Thu, Sep 1, 2016 at 4:56 PM, Gianluca Cecchi <gianluca.cec...(a)gmail.com
> wrote:
> On Thu, Sep 1, 2016 at 3:53 PM, Amit Aviram <aavi...(a)redhat.com> wrote:
>
>> You can just replace this value in the DB and change it to the right
>> FQDN, it is a config value named "ImageProxyAddress". replace
"localhost"
>> with the right address (notice that the port is there too).
>>
>> If this will keep happen after users will have the latest version, we
>> will have to open a bug and fix whatever causes the URL to be
"localhost".
>>
>>
> Do you mean through "engine-config" or directly into database?
> In this second case which is the table involved?
>
> Gianluca
>
[root@ractorshe bin]# systemctl stop ovirt-imageio-proxy
engine=# select * from vdc_options where option_name='ImageProxyAddress';
option_id | option_name | option_value | version
-----------+-------------------+-----------------+---------
950 | ImageProxyAddress | localhost:54323 | general
(1 row)
engine=# update vdc_options set option_value='ractorshe.mydomain:54323'
where option_name='ImageProxyAddress';
UPDATE 1
engine=# select * from vdc_options where option_name='ImageProxyAddress';
option_id | option_name | option_value |
version
-----------+-------------------+--------------------------------------+---------
950 | ImageProxyAddress | ractorshe.mydomain:54323 | general
(1 row)
engine=#
engine=# select * from vdc_options where option_name='ImageProxyAddress';
option_id | option_name | option_value |
version
-----------+-------------------+--------------------------------------+---------
950 | ImageProxyAddress | ractorshe.mydomain:54323 | general
(1 row)
systemctl stop ovirt-engine
(otherwise it remained localhost)
systemctl start ovirt-engine
systemctl start ovirt-imageio-proxy
Now transfer is ok.
I tried a qcow2 disck configured as 40Gb but containing about 1.6Gb of data.
I'm going to connect it to a VM and see if all is ok also from a contents
point of view.
Gianluca
_______________________________________________
Users mailing listUsers@ovirt.orghttp://lists.ovirt.org/mailman/listinfo/users
10 a.m.
New subject: How to import a qcow2 disk into ovirt
Can you send a screenshot of your browser when the issue happens?
Yaniv Dary
Technical Product Manager
Red Hat Israel Ltd.
34 Jerusalem Road
Building A, 4th floor
Ra'anana, Israel 4350109
Tel : +972 (9) 7692306
8272306
Email: ydary(a)redhat.com
IRC : ydary
On Fri, Sep 2, 2016 at 11:10 PM, Martín Follonier <
martin.follonier(a)iquall.net> wrote:
Hi,
I've done all the recommendations in this thread, and I'm still getting
the "Paused by System" message just after the transfer starts.
Honestly I don't know were else to look at, cause I don't find any log
entry or packet capture that give me a hint about what is happening.
I'll appreciate any help! Thank you in advance!
Regards
Martin
On Thu, Sep 1, 2016 at 5:01 PM, Amit Aviram <aavi...(a)redhat.com> wrote:
> You can do both,
> Through the database, the table is "vdc_options". change
"option_value"
> where "option_name" = 'ImageProxyAddress' .
>
> On Thu, Sep 1, 2016 at 4:56 PM, Gianluca Cecchi <gianluca.cec...(a)gmail.com
> > wrote:
>
>> On Thu, Sep 1, 2016 at 3:53 PM, Amit Aviram <aavi...(a)redhat.com> wrote:
>>
>>> You can just replace this value in the DB and change it to the right
>>> FQDN, it is a config value named "ImageProxyAddress". replace
"localhost"
>>> with the right address (notice that the port is there too).
>>>
>>> If this will keep happen after users will have the latest version, we
>>> will have to open a bug and fix whatever causes the URL to be
"localhost".
>>>
>>>
>> Do you mean through "engine-config" or directly into database?
>> In this second case which is the table involved?
>>
>> Gianluca
>>
>
>
[root@ractorshe bin]# systemctl stop ovirt-imageio-proxy
engine=# select * from vdc_options where option_name='ImageProxyAddress';
option_id | option_name | option_value | version
-----------+-------------------+-----------------+---------
950 | ImageProxyAddress | localhost:54323 | general
(1 row)
engine=# update vdc_options set option_value='ractorshe.mydomain:54323'
where option_name='ImageProxyAddress';
UPDATE 1
engine=# select * from vdc_options where option_name='ImageProxyAddress';
option_id | option_name | option_value |
version
-----------+-------------------+--------------------------------------+---------
950 | ImageProxyAddress | ractorshe.mydomain:54323 | general
(1 row)
engine=#
engine=# select * from vdc_options where option_name='ImageProxyAddress';
option_id | option_name | option_value |
version
-----------+-------------------+--------------------------------------+---------
950 | ImageProxyAddress | ractorshe.mydomain:54323 | general
(1 row)
systemctl stop ovirt-engine
(otherwise it remained localhost)
systemctl start ovirt-engine
systemctl start ovirt-imageio-proxy
Now transfer is ok.
I tried a qcow2 disck configured as 40Gb but containing about 1.6Gb of data.
I'm going to connect it to a VM and see if all is ok also from a contents
point of view.
Gianluca
_______________________________________________
Users mailing listUsers@ovirt.orghttp://lists.ovirt.org/mailman/listinfo/users
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
12:49 p.m.
New subject: How to import a qcow2 disk into ovirt
hi,
I tried to import qcow2 vm image (1.1) on ovirt.
My version of ovirt is 4.1.6.2-1.el7.centos on centos.
By admin portal I click on Disk-> Upload -> Start
then I choose a file qcow2, I set the dimension and alias, but after
inizialization the following message appears:
Unable to upload image to disk a8c878e2-8255-4aa1-8954-a76e0bdf3b88 due
to a network error. Make sure ovirt-imageio-proxy service is installed
and configured, and ovirt-engine's certificate is registered as a valid
CA in the browser. The certificate can be fetched from
https://<engine_url>/ovirt-engine/services/pki-resource?resource=ca-certificate&format=X509-PEM-CA
I have registered the certificate in the browser but nothing not work.
I tried with Firefox and Chromium browsers.
I tried to modify the ovirt-imageio-proxy.conf with setting 'use_ssl =
false' but not work.
I attach engine logs
How can I solve? Thank very much
Regards
Nick
Il 08/09/2016 09:00, Yaniv Dary ha scritto:
Can you send a screenshot of your browser when the issue happens?
Yaniv Dary Technical Product Manager Red Hat Israel Ltd. 34 Jerusalem
Road Building A, 4th floor Ra'anana, Israel 4350109 Tel : +972 (9)
7692306 8272306 Email: ydary(a)redhat.com <mailto:ydary@redhat.com> IRC
: ydary
On Fri, Sep 2, 2016 at 11:10 PM, Martín Follonier
<martin.follonier(a)iquall.net <mailto:martin.follonier@iquall.net>> wrote:
Hi,
I've done all the recommendations in this thread, and I'm still
getting the "Paused by System" message just after the transfer starts.
Honestly I don't know were else to look at, cause I don't find any
log entry or packet capture that give me a hint about what is
happening.
I'll appreciate any help! Thank you in advance!
Regards
Martin
On Thu, Sep 1, 2016 at 5:01 PM, Amit Aviram <aavi...(a)redhat.com
<mailto:aavi...@redhat.com>> wrote:
> You can do both,
> Through the database, the table is "vdc_options". change
"option_value"
> where "option_name" = 'ImageProxyAddress' .
>
> On Thu, Sep 1, 2016 at 4:56 PM, Gianluca Cecchi <gianluca.cec...(a)gmail.com
<mailto:gianluca.cec...@gmail.com>
> > wrote:
>
>> On Thu, Sep 1, 2016 at 3:53 PM, Amit Aviram <aavi...(a)redhat.com
<mailto:aavi...@redhat.com>> wrote:
>>
>>> You can just replace this value in the DB and change it to the right
>>> FQDN, it is a config value named "ImageProxyAddress". replace
"localhost"
>>> with the right address (notice that the port is there too).
>>>
>>> If this will keep happen after users will have the latest version, we
>>> will have to open a bug and fix whatever causes the URL to be
"localhost".
>>>
>>>
>> Do you mean through "engine-config" or directly into database?
>> In this second case which is the table involved?
>>
>> Gianluca
>>
>
>
[root@ractorshe bin]# systemctl stop ovirt-imageio-proxy
engine=# select * from vdc_options where option_name='ImageProxyAddress';
option_id | option_name | option_value | version
-----------+-------------------+-----------------+---------
950 | ImageProxyAddress | localhost:54323 | general
(1 row)
engine=# update vdc_options set option_value='ractorshe.mydomain:54323'
where option_name='ImageProxyAddress';
UPDATE 1
engine=# select * from vdc_options where option_name='ImageProxyAddress';
option_id | option_name | option_value |
version
-----------+-------------------+--------------------------------------+---------
950 | ImageProxyAddress | ractorshe.mydomain:54323 | general
(1 row)
engine=#
engine=# select * from vdc_options where option_name='ImageProxyAddress';
option_id | option_name | option_value |
version
-----------+-------------------+--------------------------------------+---------
950 | ImageProxyAddress | ractorshe.mydomain:54323 | general
(1 row)
systemctl stop ovirt-engine
(otherwise it remained localhost)
systemctl start ovirt-engine
systemctl start ovirt-imageio-proxy
Now transfer is ok.
I tried a qcow2 disck configured as 40Gb but containing about 1.6Gb of data.
I'm going to connect it to a VM and see if all is ok also from a contents
point of view.
Gianluca
_______________________________________________
Users mailing list
Users(a)ovirt.org <mailto:Users@ovirt.org>
http://lists.ovirt.org/mailman/listinfo/users
<http://lists.ovirt.org/mailman/listinfo/users>
_______________________________________________
Users mailing list
Users(a)ovirt.org <mailto:Users@ovirt.org>
http://lists.ovirt.org/mailman/listinfo/users
<http://lists.ovirt.org/mailman/listinfo/users>
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
3:12 p.m.
New subject: How to import a qcow2 disk into ovirt
--_000_1FCF90EA06C342CD8C9B2787F2E2E472baicanadacom_
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Hey Nick,
I had the same problem and in my case the engine firewall was blocking. I =
tried disabling it temporarily and it worked. I think the specific port to=
allow is 54322.
Sent from my iPhone
On Oct 4, 2017, at 5:50 AM, nicola.gentile.to <nicola.gentile.to(a)gmail.com<=
mailto:nicola.gentile.to@gmail.com>> wrote:
hi,
I tried to import qcow2 vm image (1.1) on ovirt.
My version of ovirt is 4.1.6.2-1.el7.centos on centos.
By admin portal I click on Disk-> Upload -> Start
then I choose a file qcow2, I set the dimension and alias, but after inizia=
lization the following message appears:
Unable to upload image to disk a8c878e2-8255-4aa1-8954-a76e0bdf3b88 due to =
a network error. Make sure ovirt-imageio-proxy service is installed and con=
figured, and ovirt-engine's certificate is registered as a valid CA in the =
browser. The certificate can be fetched from https://<engine_url>/ovirt-eng=
ine/services/pki-resource?resource=3Dca-certificate&format=3DX509-PEM-CA
I have registered the certificate in the browser but nothing not work.
I tried with Firefox and Chromium browsers.
I tried to modify the ovirt-imageio-proxy.conf with setting 'use_ssl =3D fa=
lse' but not work.
I attach engine logs
How can I solve? Thank very much
Regards
Nick
Il 08/09/2016 09:00, Yaniv Dary ha scritto:
Can you send a screenshot of your browser when the issue happens?
Yaniv Dary
Technical Product Manager
Red Hat Israel Ltd.
34 Jerusalem Road
Building A, 4th floor
Ra'anana, Israel 4350109
Tel : +972 (9) 7692306
8272306
Email: ydary@redhat.com<mailto:ydary@redhat.com>
IRC : ydary
On Fri, Sep 2, 2016 at 11:10 PM, Mart=EDn Follonier <martin.follonier@iqual=
l.net<mailto:martin.follonier@iquall.net>> wrote:
Hi,
I've done all the recommendations in this thread, and I'm still getting the=
"Paused by System" message just after the transfer starts.
Honestly I don't know were else to look at, cause I don't find any log entr=
y or packet capture that give me a hint about what is happening.
I'll appreciate any help! Thank you in advance!
Regards
Martin
On Thu, Sep 1, 2016 at 5:01 PM, Amit Aviram <aavi...@redhat.com<mailto:aavi=
...(a)redhat.com>> wrote:
You can do both,
Through the database, the table is "vdc_options". change
"option_value"
where "option_name" =3D 'ImageProxyAddress' .
On Thu, Sep 1, 2016 at 4:56 PM, Gianluca Cecchi <gianluca.cec...(a)gmail.co=
m<mailto:gianluca.cec...@gmail.com>
> wrote:
> On Thu, Sep 1, 2016 at 3:53 PM, Amit Aviram <aavi...@redhat.com<mailto:a=
avi...(a)redhat.com>> wrote:
>
>> You can just replace this value in the DB and change it to the right
>> FQDN, it is a config value named "ImageProxyAddress". replace
"localhos=
t"
>> with the right address (notice that the port is there too).
>>
>> If this will keep happen after users will have the latest version, we
>> will have to open a bug and fix whatever causes the URL to be "localhos=
t".
>>
>>
> Do you mean through "engine-config" or directly into database?
> In this second case which is the table involved?
>
> Gianluca
>
[root@ractorshe bin]# systemctl stop ovirt-imageio-proxy
engine=3D# select * from vdc_options where option_name=3D'ImageProxyAddress=
';
option_id | option_name | option_value | version
-----------+-------------------+-----------------+---------
950 | ImageProxyAddress | localhost:54323 | general
(1 row)
engine=3D# update vdc_options set option_value=3D'ractorshe.mydomain:54323'
where option_name=3D'ImageProxyAddress';
UPDATE 1
engine=3D# select * from vdc_options where option_name=3D'ImageProxyAddress=
';
option_id | option_name | option_value |
version
-----------+-------------------+--------------------------------------+----=
-----
950 | ImageProxyAddress | ractorshe.mydomain:54323 | general
(1 row)
engine=3D#
engine=3D# select * from vdc_options where option_name=3D'ImageProxyAddress=
';
option_id | option_name | option_value |
version
-----------+-------------------+--------------------------------------+----=
-----
950 | ImageProxyAddress | ractorshe.mydomain:54323 | general
(1 row)
systemctl stop ovirt-engine
(otherwise it remained localhost)
systemctl start ovirt-engine
systemctl start ovirt-imageio-proxy
Now transfer is ok.
I tried a qcow2 disck configured as 40Gb but containing about 1.6Gb of data=
.
I'm going to connect it to a VM and see if all is ok also from a contents
point of view.
Gianluca
_______________________________________________
Users mailing list
Users@ovirt.org<mailto:Users@ovirt.org>
http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________
Users mailing list
Users@ovirt.org<mailto:Users@ovirt.org>
http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________
Users mailing list
Users@ovirt.org<mailto:Users@ovirt.org>
http://lists.ovirt.org/mailman/listinfo/users
<engine.log>
_______________________________________________
Users mailing list
Users@ovirt.org<mailto:Users@ovirt.org>
http://lists.ovirt.org/mailman/listinfo/users
--_000_1FCF90EA06C342CD8C9B2787F2E2E472baicanadacom_
Content-Type: text/html; charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<html>
<head>
<meta http-equiv=3D"Content-Type" content=3D"text/html;
charset=3Diso-8859-=
1">
</head>
<body dir=3D"auto">
Hey Nick,
<div><br>
</div>
<div>I had the same problem and in my case the engine firewall was blocking=
. I tried disabling it temporarily and it worked. I think the s=
pecific port to allow is 54322. </div>
<div><br>
</div>
<div><br>
<div id=3D"AppleMailSignature">Sent from my iPhone</div>
<div><br>
On Oct 4, 2017, at 5:50 AM, nicola.gentile.to <<a href=3D"mailto:nicola.=
gentile.to@gmail.com">nicola.gentile.to(a)gmail.com</a>&gt;
wrote:<br>
<br>
</div>
<blockquote type=3D"cite">
<div>
<div class=3D"moz-cite-prefix">hi, <br>
I tried to import qcow2 vm image (1.1) on ovirt.<br>
My version of ovirt is <span class=3D"version-text">4.1.6.2-1.el7.centos
on=
centos.<br>
<br>
By admin portal I click on Disk-> Upload -> Start <br>
then I choose a file qcow2, I set the dimension and alias, but after inizia=
lization the following message appears:<br>
<br>
Unable to upload image to disk a8c878e2-8255-4aa1-8954-a76e0bdf3b88 due to =
a network error. Make sure ovirt-imageio-proxy service is installed and con=
figured, and ovirt-engine's certificate is registered as a valid CA in the =
browser. The certificate can be
fetched from <a class=3D"moz-txt-link-freetext"
href=3D"https://">https://=
</a><engine_url>/ovirt-engine/services/pki-resource?resource=3Dca-cer=
tificate&format=3DX509-PEM-CA<br>
<br>
I have registered the certificate in the browser but nothing not work.<br>
I tried with Firefox and Chromium browsers.<br>
<br>
I tried to modify the ovirt-imageio-proxy.conf with setting 'use_ssl =3D fa=
lse' but not work.<br>
<br>
I attach engine logs<br>
<br>
How can I solve? Thank very much<br>
Regards<br>
<br>
Nick <br>
</span><br>
<br>
Il 08/09/2016 09:00, Yaniv Dary ha scritto:<br>
</div>
<blockquote type=3D"cite"
cite=3D"mid:CACKMAy_HL_YQS0tEp_rpofybgm09MBNsVmsf=
bFUL1ZFeeF_U2w(a)mail.gmail.com">
<div dir=3D"ltr">Can you send a screenshot of your browser when the issue
h=
appens?</div>
<div class=3D"gmail_extra"><br clear=3D"all">
<div>
<div class=3D"gmail_signature"
data-smartmail=3D"gmail_signature">
<div dir=3D"ltr">
<div>
<div dir=3D"ltr">
<pre cols=3D"72"><span
style=3D"font-family:arial,helvetica,sans-serif">Yan=
iv Dary
Technical Product Manager
Red Hat Israel Ltd.
34 Jerusalem Road
Building A, 4th floor
Ra'anana, Israel 4350109
Tel : +972 (9) 7692306
8272306
Email: <a href=3D"mailto:ydary@redhat.com" target=3D"_blank"
moz-do-not-sen=
d=3D"true">ydary(a)redhat.com</a>
IRC : ydary</span></pre>
</div>
</div>
</div>
</div>
</div>
<br>
<div class=3D"gmail_quote">On Fri, Sep 2, 2016 at 11:10 PM, Mart=EDn
Follon=
ier <span dir=3D"ltr">
<<a href=3D"mailto:martin.follonier@iquall.net"
target=3D"_blank" moz-do=
-not-send=3D"true">martin.follonier(a)iquall.net</a>&gt;</span>
wrote:<br>
<blockquote class=3D"gmail_quote" style=3D"margin:0 0 0
.8ex;border-left:1px #ccc solid;padding-left:1ex">
<div dir=3D"ltr"><br clear=3D"all">
<div>
<div data-smartmail=3D"gmail_signature">
<div dir=3D"ltr">
<div><span
style=3D"font-family:monospace,monospace">Hi, </span><br>
</div>
</div>
</div>
</div>
<div class=3D"gmail_quote">
<div dir=3D"ltr">
<div class=3D"gmail_extra">
<div>
<div><font face=3D"monospace, monospace"><br>
</font></div>
<div><font face=3D"monospace, monospace">I've done all the
recommendations =
in this thread, and I'm still getting the "Paused by System" mess=
age just after the transfer starts.</font></div>
<div><font face=3D"monospace, monospace"><br>
</font></div>
<div><font face=3D"monospace, monospace">Honestly I don't know
were else to=
look at, cause I don't find any log entry or packet capture that give me a=
hint about what is happening.</font></div>
<div><font face=3D"monospace, monospace"><br>
</font></div>
<div><font face=3D"monospace, monospace">I'll appreciate any
help! Thank yo=
u in advance!</font></div>
<div><font face=3D"monospace, monospace"><br>
</font></div>
<div><font face=3D"monospace,
monospace">Regards</font></div>
<div><font face=3D"monospace, monospace"><br>
</font></div>
<div><font face=3D"monospace,
monospace">Martin</font></div>
</div>
<br>
<div class=3D"gmail_quote"><span class=3D"">
<pre style=3D"font-family:courier,"courier
new",monospace;font-si=
ze:14px;white-space:pre-wrap;word-wrap:break-word;margin-top:0px;margin-bot=
tom:0px;color:rgb(0,0,0);line-height:19.6px">On Thu, Sep 1, 2016 at 5:01 PM=
, Amit Aviram <<a href=3D"mailto:aavi...@redhat.com"
target=3D"_blank" m=
oz-do-not-send=3D"true">aavi...(a)redhat.com</a>&gt;
wrote:</pre>
</span>
<pre style=3D"font-family:courier,"courier
new",monospace;font-si=
ze:14px;white-space:pre-wrap;word-wrap:break-word;margin-top:0px;margin-bot=
tom:0px;color:rgb(0,0,0);line-height:19.6px">> You can do both,
> Through the database, the table is "vdc_options". change
&qu=
ot;option_value"
> where "option_name" =3D 'ImageProxyAddress' .
>
> On Thu, Sep 1, 2016 at 4:56 PM, Gianluca Cecchi <<a
href=3D"mailto:=
gianluca.cec...(a)gmail.com" target=3D"_blank"
moz-do-not-send=3D"true">gianl=
uca.cec...(a)gmail.com</a>
> > wrote:
>
>> On Thu, Sep 1, 2016 at 3:53 PM, Amit Aviram <<a
href=3D"mailto:=
aavi...(a)redhat.com" target=3D"_blank"
moz-do-not-send=3D"true">aavi...@redh=
at.com</a>> wrote:
>>
>>> You can just replace this value in the DB and change it to the=
right
>>> FQDN, it is a config value named
"ImageProxyAddress"=
. replace "localhost"
>>> with the right address (notice that the port is there too).
>>>
>>> If this will keep happen after users will have the latest vers=
ion, we
>>> will have to open a bug and fix whatever causes the URL to be =
"localhost".
>>>
>>>
>> Do you mean through "engine-config" or directly into
dat=
abase?
>> In this second case which is the table involved?
>>
>> Gianluca
>>
>
>
[root@ractorshe bin]# systemctl stop ovirt-imageio-proxy
engine=3D# select * from vdc_options where option_name=3D'ImageProxyAddress=
<wbr>';
option_id | option_name | option_value | version
-----------+------------------<wbr>-+-----------------+--------=
-
950 | ImageProxyAddress | localhost:54323 | general
(1 row)
engine=3D# update vdc_options set option_value=3D'ractorshe.mydoma<wbr>in:5=
4323'
where option_name=3D'ImageProxyAddress<wbr>';
UPDATE 1
engine=3D# select * from vdc_options where option_name=3D'ImageProxyAddress=
<wbr>';
option_id | option_name | option_value |
version
-----------+------------------<wbr>-+----------------------------<w=
br>----------+---------
950 | ImageProxyAddress | ractorshe.mydomain:54323 | general
(1 row)
engine=3D#
engine=3D# select * from vdc_options where option_name=3D'ImageProxyAddress=
<wbr>';
option_id | option_name | option_value |
version
-----------+------------------<wbr>-+----------------------------<w=
br>----------+---------
950 | ImageProxyAddress | ractorshe.mydomain:54323 | general
(1 row)
systemctl stop ovirt-engine
(otherwise it remained localhost)
systemctl start ovirt-engine
systemctl start ovirt-imageio-proxy
Now transfer is ok.
I tried a qcow2 disck configured as 40Gb but containing about 1.6Gb of data=
.
I'm going to connect it to a VM and see if all is ok also from a contents
point of view.
Gianluca
</pre>
<span class=3D"">
<pre style=3D"font-family:courier,"courier
new",monospace;font-si=
ze:14px;white-space:pre-wrap;word-wrap:break-word;margin-top:0px;margin-bot=
tom:0px;color:rgb(0,0,0);line-height:19.6px">______________________________=
<wbr>_________________
Users mailing list
<a href=3D"mailto:Users@ovirt.org" target=3D"_blank"
moz-do-not-send=3D"tru=
e">Users(a)ovirt.org</a>
<a rel=3D"nofollow"
href=3D"http://lists.ovirt.org/mailman/listinfo/users" =
style=3D"color:rgb(160,30,30)" target=3D"_blank"
moz-do-not-send=3D"true">h=
ttp://lists.ovirt.org/mailman<wbr>/listinfo/users</a></pre...
</span></div>
</div>
</div>
</div>
<br>
</div>
<br>
______________________________<wbr>_________________<br>
Users mailing list<br>
<a href=3D"mailto:Users@ovirt.org"
moz-do-not-send=3D"true">Users(a)ovirt.org=
</a><br>
<a href=3D"http://lists.ovirt.org/mailman/listinfo/users"
rel=3D"noreferrer=
" target=3D"_blank"
moz-do-not-send=3D"true">http://lists.ovirt.org/<wbr>ma=
ilman/listinfo/users</a><br>
<br>
</blockquote>
</div>
<br>
</div>
<br>
<fieldset class=3D"mimeAttachmentHeader"></fieldset> <br>
<pre wrap=3D"">_______________________________________________
Users mailing list
<a class=3D"moz-txt-link-abbreviated"
href=3D"mailto:Users@ovirt.org">Users=
@ovirt.org</a>
<a class=3D"moz-txt-link-freetext"
href=3D"http://lists.ovirt.org/mailman/l=
istinfo/users">http://lists.ovirt.org/mailman/listinfo/users</...
</pre>
</blockquote>
<br>
</div>
</blockquote>
<blockquote type=3D"cite">
<div><engine.log></div>
</blockquote>
<blockquote type=3D"cite">
<div><span>_______________________________________________</span><br>
<span>Users mailing list</span><br>
<span><a
href=3D"mailto:Users@ovirt.org">Users@ovirt.org</a></span><br>
<span><a
href=3D"http://lists.ovirt.org/mailman/listinfo/users">http:...
s.ovirt.org/mailman/listinfo/users</a></span><br>
</div>
</blockquote>
</div>
</body>
</html>
--_000_1FCF90EA06C342CD8C9B2787F2E2E472baicanadacom_--
3:38 p.m.
New subject: How to import a qcow2 disk into ovirt
This is a multi-part message in MIME format.
--------------2E28F917E54976110789B306
Content-Type: text/plain; charset=windows-1252; format=flowed
Content-Transfer-Encoding: 8bit
Thanks Alexander,
nothing not work
always the same error....
any suggestions?
thank
Il 04/10/2017 14:12, Alexander Witte ha scritto:
Hey Nick,
I had the same problem and in my case the engine firewall was
blocking. I tried disabling it temporarily and it worked. I think
the specific port to allow is 54322.
Sent from my iPhone
On Oct 4, 2017, at 5:50 AM, nicola.gentile.to
<nicola.gentile.to(a)gmail.com <mailto:nicola.gentile.to@gmail.com>> wrote:
> hi,
> I tried to import qcow2 vm image (1.1) on ovirt.
> My version of ovirt is 4.1.6.2-1.el7.centos on centos.
>
> By admin portal I click on Disk-> Upload -> Start
> then I choose a file qcow2, I set the dimension and alias, but after
> inizialization the following message appears:
>
> Unable to upload image to disk a8c878e2-8255-4aa1-8954-a76e0bdf3b88
> due to a network error. Make sure ovirt-imageio-proxy service is
> installed and configured, and ovirt-engine's certificate is
> registered as a valid CA in the browser. The certificate can be
> fetched from
>
https://<engine_url>/ovirt-engine/services/pki-resource?resource=ca-certificate&format=X509-PEM-CA
>
> I have registered the certificate in the browser but nothing not work.
> I tried with Firefox and Chromium browsers.
>
> I tried to modify the ovirt-imageio-proxy.conf with setting 'use_ssl
> = false' but not work.
>
> I attach engine logs
>
> How can I solve? Thank very much
> Regards
>
> Nick
>
>
> Il 08/09/2016 09:00, Yaniv Dary ha scritto:
>> Can you send a screenshot of your browser when the issue happens?
>>
>> Yaniv Dary Technical Product Manager Red Hat Israel Ltd. 34
>> Jerusalem Road Building A, 4th floor Ra'anana, Israel 4350109 Tel :
>> +972 (9) 7692306 8272306 Email: ydary(a)redhat.com
>> <mailto:ydary@redhat.com> IRC : ydary
>>
>> On Fri, Sep 2, 2016 at 11:10 PM, Martín Follonier
>> <martin.follonier(a)iquall.net <mailto:martin.follonier@iquall.net>>
>> wrote:
>>
>>
>> Hi,
>>
>> I've done all the recommendations in this thread, and I'm still
>> getting the "Paused by System" message just after the transfer
>> starts.
>>
>> Honestly I don't know were else to look at, cause I don't find
>> any log entry or packet capture that give me a hint about what
>> is happening.
>>
>> I'll appreciate any help! Thank you in advance!
>>
>> Regards
>>
>> Martin
>>
>> On Thu, Sep 1, 2016 at 5:01 PM, Amit Aviram <aavi...(a)redhat.com
<mailto:aavi...@redhat.com>> wrote:
>>
>> > You can do both,
>> > Through the database, the table is "vdc_options". change
"option_value"
>> > where "option_name" = 'ImageProxyAddress' .
>> >
>> > On Thu, Sep 1, 2016 at 4:56 PM, Gianluca Cecchi
<gianluca.cec...(a)gmail.com <mailto:gianluca.cec...@gmail.com>
>> > > wrote:
>> >
>> >> On Thu, Sep 1, 2016 at 3:53 PM, Amit Aviram <aavi...(a)redhat.com
<mailto:aavi...@redhat.com>> wrote:
>> >>
>> >>> You can just replace this value in the DB and change it to the
right
>> >>> FQDN, it is a config value named "ImageProxyAddress".
replace "localhost"
>> >>> with the right address (notice that the port is there too).
>> >>>
>> >>> If this will keep happen after users will have the latest
version, we
>> >>> will have to open a bug and fix whatever causes the URL to be
"localhost".
>> >>>
>> >>>
>> >> Do you mean through "engine-config" or directly into
database?
>> >> In this second case which is the table involved?
>> >>
>> >> Gianluca
>> >>
>> >
>> >
>>
>> [root@ractorshe bin]# systemctl stop ovirt-imageio-proxy
>>
>> engine=# select * from vdc_options where
option_name='ImageProxyAddress';
>> option_id | option_name | option_value | version
>> -----------+-------------------+-----------------+---------
>> 950 | ImageProxyAddress | localhost:54323 | general
>> (1 row)
>>
>> engine=# update vdc_options set
option_value='ractorshe.mydomain:54323'
>> where option_name='ImageProxyAddress';
>> UPDATE 1
>> engine=# select * from vdc_options where
option_name='ImageProxyAddress';
>> option_id | option_name | option_value |
>> version
>>
-----------+-------------------+--------------------------------------+---------
>> 950 | ImageProxyAddress | ractorshe.mydomain:54323 | general
>> (1 row)
>>
>> engine=#
>>
>> engine=# select * from vdc_options where
option_name='ImageProxyAddress';
>> option_id | option_name | option_value |
>> version
>>
-----------+-------------------+--------------------------------------+---------
>> 950 | ImageProxyAddress | ractorshe.mydomain:54323 | general
>> (1 row)
>>
>>
>> systemctl stop ovirt-engine
>> (otherwise it remained localhost)
>>
>> systemctl start ovirt-engine
>>
>> systemctl start ovirt-imageio-proxy
>>
>> Now transfer is ok.
>> I tried a qcow2 disck configured as 40Gb but containing about 1.6Gb of data.
>> I'm going to connect it to a VM and see if all is ok also from a
contents
>> point of view.
>>
>> Gianluca
>>
>> _______________________________________________
>> Users mailing list
>> Users(a)ovirt.org <mailto:Users@ovirt.org>
>> http://lists.ovirt.org/mailman/listinfo/users
>> <http://lists.ovirt.org/mailman/listinfo/users>
>>
>>
>>
>> _______________________________________________
>> Users mailing list
>> Users(a)ovirt.org <mailto:Users@ovirt.org>
>> http://lists.ovirt.org/mailman/listinfo/users
>> <http://lists.ovirt.org/mailman/listinfo/users>
>>
>>
>>
>>
>> _______________________________________________
>> Users mailing list
>> Users(a)ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>
> <engine.log>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org <mailto:Users@ovirt.org>
> http://lists.ovirt.org/mailman/listinfo/users
--------------2E28F917E54976110789B306
Content-Type: text/html; charset=windows-1252
Content-Transfer-Encoding: 8bit
<html>
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=windows-1252">
</head>
<body text="#000000" bgcolor="#FFFFFF">
<div class="moz-cite-prefix">Thanks Alexander,<br>
<br>
nothing not work <br>
always the same error....<br>
any suggestions?<br>
<br>
thank <br>
<br>
<br>
Il 04/10/2017 14:12, Alexander Witte ha scritto:<br>
</div>
<blockquote type="cite"
cite="mid:1FCF90EA-06C3-42CD-8C9B-2787F2E2E472@baicanada.com">
<meta http-equiv="Content-Type" content="text/html;
charset=windows-1252">
Hey Nick,
<div><br>
</div>
<div>I had the same problem and in my case the engine firewall was
blocking. I tried disabling it temporarily and it worked. I
think the specific port to allow is 54322. </div>
<div><br>
</div>
<div><br>
<div id="AppleMailSignature">Sent from my iPhone</div>
<div><br>
On Oct 4, 2017, at 5:50 AM, nicola.gentile.to <<a
href="mailto:nicola.gentile.to@gmail.com"
moz-do-not-send="true">nicola.gentile.to(a)gmail.com</a>&gt;
wrote:<br>
<br>
</div>
<blockquote type="cite">
<div>
<div class="moz-cite-prefix">hi, <br>
I tried to import qcow2 vm image (1.1) on ovirt.<br>
My version of ovirt is <span
class="version-text">4.1.6.2-1.el7.centos
on centos.<br>
<br>
By admin portal I click on Disk-> Upload -> Start
<br>
then I choose a file qcow2, I set the dimension and
alias, but after inizialization the following message
appears:<br>
<br>
Unable to upload image to disk
a8c878e2-8255-4aa1-8954-a76e0bdf3b88 due to a network
error. Make sure ovirt-imageio-proxy service is
installed and configured, and ovirt-engine's certificate
is registered as a valid CA in the browser. The
certificate can be fetched from <a
class="moz-txt-link-freetext" href="https://"
moz-do-not-send="true">https://</a><engine_url>/ovirt-engine/services/pki-resource?resource=ca-certificate&format=X509-PEM-CA<br>
<br>
I have registered the certificate in the browser but
nothing not work.<br>
I tried with Firefox and Chromium browsers.<br>
<br>
I tried to modify the ovirt-imageio-proxy.conf with
setting 'use_ssl = false' but not work.<br>
<br>
I attach engine logs<br>
<br>
How can I solve? Thank very much<br>
Regards<br>
<br>
Nick <br>
</span><br>
<br>
Il 08/09/2016 09:00, Yaniv Dary ha scritto:<br>
</div>
<blockquote type="cite"
cite="mid:CACKMAy_HL_YQS0tEp_rpofybgm09MBNsVmsfbFUL1ZFeeF_U2w@mail.gmail.com">
<div dir="ltr">Can you send a screenshot of your browser
when the issue happens?</div>
<div class="gmail_extra"><br clear="all">
<div>
<div class="gmail_signature"
data-smartmail="gmail_signature">
<div dir="ltr">
<div>
<div dir="ltr">
<pre cols="72"><span
style="font-family:arial,helvetica,sans-serif">Yaniv Dary
Technical Product Manager
Red Hat Israel Ltd.
34 Jerusalem Road
Building A, 4th floor
Ra'anana, Israel 4350109
Tel : +972 (9) 7692306
8272306
Email: <a href="mailto:ydary@redhat.com" target="_blank"
moz-do-not-send="true">ydary(a)redhat.com</a>
IRC : ydary</span></pre>
</div>
</div>
</div>
</div>
</div>
<br>
<div class="gmail_quote">On Fri, Sep 2, 2016 at 11:10
PM, Martín Follonier <span dir="ltr">
<<a href="mailto:martin.follonier@iquall.net"
target="_blank"
moz-do-not-send="true">martin.follonier(a)iquall.net</a>&gt;</span>
wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0
.8ex;border-left:1px #ccc solid;padding-left:1ex">
<div dir="ltr"><br clear="all">
<div>
<div data-smartmail="gmail_signature">
<div dir="ltr">
<div><span
style="font-family:monospace,monospace">Hi, </span><br>
</div>
</div>
</div>
</div>
<div class="gmail_quote">
<div dir="ltr">
<div class="gmail_extra">
<div>
<div><font face="monospace,
monospace"><br>
</font></div>
<div><font face="monospace,
monospace">I've
done all the recommendations in this
thread, and I'm still getting the
"Paused by System" message just after
the transfer starts.</font></div>
<div><font face="monospace,
monospace"><br>
</font></div>
<div><font face="monospace,
monospace">Honestly
I don't know were else to look at,
cause I don't find any log entry or
packet capture that give me a hint
about what is happening.</font></div>
<div><font face="monospace,
monospace"><br>
</font></div>
<div><font face="monospace,
monospace">I'll
appreciate any help! Thank you in
advance!</font></div>
<div><font face="monospace,
monospace"><br>
</font></div>
<div><font face="monospace,
monospace">Regards</font></div>
<div><font face="monospace,
monospace"><br>
</font></div>
<div><font face="monospace,
monospace">Martin</font></div>
</div>
<br>
<div class="gmail_quote"><span
class="">
<pre style="font-family:courier,"courier
new",monospace;font-size:14px;white-space:pre-wrap;word-wrap:break-word;margin-top:0px;margin-bottom:0px;color:rgb(0,0,0);line-height:19.6px">On
Thu, Sep 1, 2016 at 5:01 PM, Amit Aviram <<a
href="mailto:aavi...@redhat.com" target="_blank"
moz-do-not-send="true">aavi...(a)redhat.com</a>&gt;
wrote:</pre>
</span>
<pre style="font-family:courier,"courier
new",monospace;font-size:14px;white-space:pre-wrap;word-wrap:break-word;margin-top:0px;margin-bottom:0px;color:rgb(0,0,0);line-height:19.6px">>
You can do both,
> Through the database, the table is "vdc_options". change
"option_value"
> where "option_name" = 'ImageProxyAddress' .
>
> On Thu, Sep 1, 2016 at 4:56 PM, Gianluca Cecchi <<a
href="mailto:gianluca.cec...@gmail.com" target="_blank"
moz-do-not-send="true">gianluca.cec...(a)gmail.com</a>
> > wrote:
>
>> On Thu, Sep 1, 2016 at 3:53 PM, Amit Aviram <<a
href="mailto:aavi...@redhat.com" target="_blank"
moz-do-not-send="true">aavi...(a)redhat.com</a>&gt; wrote:
>>
>>> You can just replace this value in the DB and change it to the
right
>>> FQDN, it is a config value named "ImageProxyAddress".
replace "localhost"
>>> with the right address (notice that the port is there too).
>>>
>>> If this will keep happen after users will have the latest
version, we
>>> will have to open a bug and fix whatever causes the URL to be
"localhost".
>>>
>>>
>> Do you mean through "engine-config" or directly into database?
>> In this second case which is the table involved?
>>
>> Gianluca
>>
>
>
[root@ractorshe bin]# systemctl stop ovirt-imageio-proxy
engine=# select * from vdc_options where
option_name='ImageProxyAddress<wbr>';
option_id | option_name | option_value | version
-----------+------------------<wbr>-+-----------------+---------
950 | ImageProxyAddress | localhost:54323 | general
(1 row)
engine=# update vdc_options set
option_value='ractorshe.mydoma<wbr>in:54323'
where option_name='ImageProxyAddress<wbr>';
UPDATE 1
engine=# select * from vdc_options where
option_name='ImageProxyAddress<wbr>';
option_id | option_name | option_value |
version
-----------+------------------<wbr>-+----------------------------<wbr>----------+---------
950 | ImageProxyAddress | ractorshe.mydomain:54323 | general
(1 row)
engine=#
engine=# select * from vdc_options where
option_name='ImageProxyAddress<wbr>';
option_id | option_name | option_value |
version
-----------+------------------<wbr>-+----------------------------<wbr>----------+---------
950 | ImageProxyAddress | ractorshe.mydomain:54323 | general
(1 row)
systemctl stop ovirt-engine
(otherwise it remained localhost)
systemctl start ovirt-engine
systemctl start ovirt-imageio-proxy
Now transfer is ok.
I tried a qcow2 disck configured as 40Gb but containing about 1.6Gb of data.
I'm going to connect it to a VM and see if all is ok also from a contents
point of view.
Gianluca
</pre>
<span class="">
<pre style="font-family:courier,"courier
new",monospace;font-size:14px;white-space:pre-wrap;word-wrap:break-word;margin-top:0px;margin-bottom:0px;color:rgb(0,0,0);line-height:19.6px">______________________________<wbr>_________________
Users mailing list
<a href="mailto:Users@ovirt.org" target="_blank"
moz-do-not-send="true">Users(a)ovirt.org</a>
<a rel="nofollow"
href="http://lists.ovirt.org/mailman/listinfo/users"
style="color:rgb(160,30,30)" target="_blank"
moz-do-not-send="true">http://lists.ovirt.org/mailman<wbr...
</span></div>
</div>
</div>
</div>
<br>
</div>
<br>
______________________________<wbr>_________________<br>
Users mailing list<br>
<a href="mailto:Users@ovirt.org"
moz-do-not-send="true">Users(a)ovirt.org</a><br>
<a
href="http://lists.ovirt.org/mailman/listinfo/users"
rel="noreferrer" target="_blank"
moz-do-not-send="true">http://lists.ovirt.org/<wbr>mai...
<br>
</blockquote>
</div>
<br>
</div>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<br>
<pre
wrap="">_______________________________________________
Users mailing list
<a class="moz-txt-link-abbreviated" href="mailto:Users@ovirt.org"
moz-do-not-send="true">Users(a)ovirt.org</a>
<a class="moz-txt-link-freetext"
href="http://lists.ovirt.org/mailman/listinfo/users"
moz-do-not-send="true">http://lists.ovirt.org/mailman/listin...
</pre>
</blockquote>
<br>
</div>
</blockquote>
<blockquote type="cite">
<div><engine.log></div>
</blockquote>
<blockquote type="cite">
<div><span>_______________________________________________</span><br>
<span>Users mailing list</span><br>
<span><a href="mailto:Users@ovirt.org"
moz-do-not-send="true">Users(a)ovirt.org</a></span><br>
<span><a
href="http://lists.ovirt.org/mailman/listinfo/users"
moz-do-not-send="true">http://lists.ovirt.org/mailman/listin...
</div>
</blockquote>
</div>
</blockquote>
<br>
</body>
</html>
--------------2E28F917E54976110789B306--
3:42 p.m.
New subject: How to import a qcow2 disk into ovirt
Check this log file on engine machine:
/var/log/ovirt-imageio-proxy/image-proxy.log
And this on the host which is used to upload:
/var/log/ovirt-imageio-daemon/daemon.log
Any errors there?
On Wed, Oct 4, 2017 at 2:38 PM, nicola.gentile.to
<nicola.gentile.to(a)gmail.com> wrote:
Thanks Alexander,
nothing not work
always the same error....
any suggestions?
thank
Il 04/10/2017 14:12, Alexander Witte ha scritto:
Hey Nick,
I had the same problem and in my case the engine firewall was blocking. I
tried disabling it temporarily and it worked. I think the specific port to
allow is 54322.
Sent from my iPhone
On Oct 4, 2017, at 5:50 AM, nicola.gentile.to <nicola.gentile.to(a)gmail.com>
wrote:
hi,
I tried to import qcow2 vm image (1.1) on ovirt.
My version of ovirt is 4.1.6.2-1.el7.centos on centos.
By admin portal I click on Disk-> Upload -> Start
then I choose a file qcow2, I set the dimension and alias, but after
inizialization the following message appears:
Unable to upload image to disk a8c878e2-8255-4aa1-8954-a76e0bdf3b88 due to a
network error. Make sure ovirt-imageio-proxy service is installed and
configured, and ovirt-engine's certificate is registered as a valid CA in
the browser. The certificate can be fetched from
https://<engine_url>/ovirt-engine/services/pki-resource?resource=ca-certificate&format=X509-PEM-CA
I have registered the certificate in the browser but nothing not work.
I tried with Firefox and Chromium browsers.
I tried to modify the ovirt-imageio-proxy.conf with setting 'use_ssl =
false' but not work.
I attach engine logs
How can I solve? Thank very much
Regards
Nick
Il 08/09/2016 09:00, Yaniv Dary ha scritto:
Can you send a screenshot of your browser when the issue happens?
Yaniv Dary
Technical Product Manager
Red Hat Israel Ltd.
34 Jerusalem Road
Building A, 4th floor
Ra'anana, Israel 4350109
Tel : +972 (9) 7692306
8272306
Email: ydary(a)redhat.com
IRC : ydary
On Fri, Sep 2, 2016 at 11:10 PM, Martín Follonier
<martin.follonier(a)iquall.net> wrote:
>
>
> Hi,
>
> I've done all the recommendations in this thread, and I'm still getting
> the "Paused by System" message just after the transfer starts.
>
> Honestly I don't know were else to look at, cause I don't find any log
> entry or packet capture that give me a hint about what is happening.
>
> I'll appreciate any help! Thank you in advance!
>
> Regards
>
> Martin
>
> On Thu, Sep 1, 2016 at 5:01 PM, Amit Aviram <aavi...(a)redhat.com> wrote:
>
> > You can do both,
> > Through the database, the table is "vdc_options". change
"option_value"
> > where "option_name" = 'ImageProxyAddress' .
> >
> > On Thu, Sep 1, 2016 at 4:56 PM, Gianluca Cecchi
> > <gianluca.cec...(a)gmail.com
> > > wrote:
> >
> >> On Thu, Sep 1, 2016 at 3:53 PM, Amit Aviram <aavi...(a)redhat.com>
wrote:
> >>
> >>> You can just replace this value in the DB and change it to the right
> >>> FQDN, it is a config value named "ImageProxyAddress". replace
> >>> "localhost"
> >>> with the right address (notice that the port is there too).
> >>>
> >>> If this will keep happen after users will have the latest version, we
> >>> will have to open a bug and fix whatever causes the URL to be
> >>> "localhost".
> >>>
> >>>
> >> Do you mean through "engine-config" or directly into database?
> >> In this second case which is the table involved?
> >>
> >> Gianluca
> >>
> >
> >
>
> [root@ractorshe bin]# systemctl stop ovirt-imageio-proxy
>
> engine=# select * from vdc_options where option_name='ImageProxyAddress';
> option_id | option_name | option_value | version
> -----------+-------------------+-----------------+---------
> 950 | ImageProxyAddress | localhost:54323 | general
> (1 row)
>
> engine=# update vdc_options set option_value='ractorshe.mydomain:54323'
> where option_name='ImageProxyAddress';
> UPDATE 1
> engine=# select * from vdc_options where option_name='ImageProxyAddress';
> option_id | option_name | option_value |
> version
>
> -----------+-------------------+--------------------------------------+---------
> 950 | ImageProxyAddress | ractorshe.mydomain:54323 | general
> (1 row)
>
> engine=#
>
> engine=# select * from vdc_options where option_name='ImageProxyAddress';
> option_id | option_name | option_value |
> version
>
> -----------+-------------------+--------------------------------------+---------
> 950 | ImageProxyAddress | ractorshe.mydomain:54323 | general
> (1 row)
>
>
> systemctl stop ovirt-engine
> (otherwise it remained localhost)
>
> systemctl start ovirt-engine
>
> systemctl start ovirt-imageio-proxy
>
> Now transfer is ok.
> I tried a qcow2 disck configured as 40Gb but containing about 1.6Gb of
> data.
> I'm going to connect it to a VM and see if all is ok also from a contents
> point of view.
>
> Gianluca
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
<engine.log>
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
4:11 p.m.
New subject: How to import a qcow2 disk into ovirt
hi,
I tried to "cancel" operation and do again without firewall but always
the same error
Il 04/10/2017 14:42, Ondra Machacek ha scritto:
Check this log file on engine machine:
/var/log/ovirt-imageio-proxy/image-proxy.log
there are no errors
And this on the host which is used to upload:
/var/log/ovirt-imageio-daemon/daemon.log
this file log there isn't
Any errors there?
On Wed, Oct 4, 2017 at 2:38 PM, nicola.gentile.to
<nicola.gentile.to(a)gmail.com> wrote:
> Thanks Alexander,
>
> nothing not work
> always the same error....
> any suggestions?
>
> thank
>
>
> Il 04/10/2017 14:12, Alexander Witte ha scritto:
>
> Hey Nick,
>
> I had the same problem and in my case the engine firewall was blocking. I
> tried disabling it temporarily and it worked. I think the specific port to
> allow is 54322.
>
>
> Sent from my iPhone
>
> On Oct 4, 2017, at 5:50 AM, nicola.gentile.to <nicola.gentile.to(a)gmail.com>
> wrote:
>
> hi,
> I tried to import qcow2 vm image (1.1) on ovirt.
> My version of ovirt is 4.1.6.2-1.el7.centos on centos.
>
> By admin portal I click on Disk-> Upload -> Start
> then I choose a file qcow2, I set the dimension and alias, but after
> inizialization the following message appears:
>
> Unable to upload image to disk a8c878e2-8255-4aa1-8954-a76e0bdf3b88 due to a
> network error. Make sure ovirt-imageio-proxy service is installed and
> configured, and ovirt-engine's certificate is registered as a valid CA in
> the browser. The certificate can be fetched from
>
https://<engine_url>/ovirt-engine/services/pki-resource?resource=ca-certificate&format=X509-PEM-CA
>
> I have registered the certificate in the browser but nothing not work.
> I tried with Firefox and Chromium browsers.
>
> I tried to modify the ovirt-imageio-proxy.conf with setting 'use_ssl =
> false' but not work.
>
> I attach engine logs
>
> How can I solve? Thank very much
> Regards
>
> Nick
>
>
> Il 08/09/2016 09:00, Yaniv Dary ha scritto:
>
> Can you send a screenshot of your browser when the issue happens?
>
> Yaniv Dary
> Technical Product Manager
> Red Hat Israel Ltd.
> 34 Jerusalem Road
> Building A, 4th floor
> Ra'anana, Israel 4350109
>
> Tel : +972 (9) 7692306
> 8272306
> Email: ydary(a)redhat.com
> IRC : ydary
>
>
> On Fri, Sep 2, 2016 at 11:10 PM, Martín Follonier
> <martin.follonier(a)iquall.net> wrote:
>>
>> Hi,
>>
>> I've done all the recommendations in this thread, and I'm still getting
>> the "Paused by System" message just after the transfer starts.ssfully
stopped image transfer session for ticket 'b746787a-dfe8-46c3-b9ec-2b1aebb69c77'
>>
>>
>> Honestly I don't know were else to look at, cause I don't find any log
>> entry or packet capture that give me a hint about what is happening.
>>
>> I'll appreciate any help! Thank you in advance!
>>
>> Regards
>>
>> Martin
>>
>> On Thu, Sep 1, 2016 at 5:01 PM, Amit Aviram <aavi...(a)redhat.com> wrote:
>>
>>> You can do both,
>>> Through the database, the table is "vdc_options". change
"option_value"
>>> where "option_name" = 'ImageProxyAddress' .
>>>
>>> On Thu, Sep 1, 2016 at 4:56 PM, Gianluca Cecchi
>>> <gianluca.cec...(a)gmail.com
>>>> wrote:
>>>> On Thu, Sep 1, 2016 at 3:53 PM, Amit Aviram <aavi...(a)redhat.com>
wrote:
>>>>
>>>>> You can just replace this value in the DB and change it to the right
>>>>> FQDN, it is a config value named "ImageProxyAddress".
replace
>>>>> "localhost"
>>>>> with the right address (notice that the port is there too).
>>>>>
>>>>> If this will keep happen after users will have the latest version,
we
>>>>> will have to open a bug and fix whatever causes the URL to be
>>>>> "localhost".
>>>>>
>>>>>
>>>> Do you mean through "engine-config" or directly into database?
>>>> In this second case which is the table involved?
>>>>
>>>> Gianlucassfully stopped image transfer session for ticket
'b746787a-dfe8-46c3-b9ec-2b1aebb69c77'
>>>>
>>>>
>>>
>> [root@ractorshe bin]# systemctl stop ovirt-imageio-proxy
>>
>> engine=# select * from vdc_options where
option_name='ImageProxyAddress';
>> option_id | option_name | option_value | version
>> -----------+-------------------+-----------------+---------
>> 950 | ImageProxyAddress | localhost:54323 | general
>> (1 row)
>>
>> engine=# update vdc_options set option_value='ractorshe.mydomain:54323'
>> where option_name='ImageProxyAddress';
>> UPDATE 1
>> engine=# select * from vdc_options where
option_name='ImageProxyAddress';
>> option_id | option_name | option_value |
>> version
>>
>> -----------+-------------------+--------------------------------------+---------
>> 950 | ImageProxyAddress | ractorshe.mydomain:54323 | general
>> (1 row)
>>
>> engine=#
>>
>> engine=# select * from vdc_options where
option_name='ImageProxyAddress';
>> option_id | option_name | option_value |
>> version
>>
>> -----------+-------------------+--------------------------------------+---------
>> 950 | ImageProxyAddress | ractorshe.mydomain:54323 | general
>> (1 row)
>>
>>
>> systemctl stop ovirt-engine
>> (otherwise it remained localhost)
>>
>> systemctl start ovirt-engine
>>
>> systemctl start ovirt-imageio-proxy
>>
>> Now transfer is ok.
>> I tried a qcow2 disck configured as 40Gb but containing about 1.6Gb of
>> data.
>> I'm going to connect it to a VM and see if all is ok also from a contents
>> point of view.
>>
>> Gianluca
>>
>> _______________________________________________
>> Users mailing list
>> Users(a)ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>
>>
>>
>> _______________________________________________
>> Users mailing list
>> Users(a)ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>
>
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>
> <engine.log>
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
2606
days inactive
3003
days old
6 comments
5 participants
participants (5)
-
Alexander Witte -
Martín Follonier -
nicola.gentile.to -
Ondra Machacek -
Yaniv Dary