5:14 a.m.
Hello,
we are designing a new production cluster, and I have to questsions about GlusterFS
please:
1- this quote from the documentation os not clear to me "
Creating additional data domains in the same data center as the self-hosted engine storage
domain is highly recommended. If you deploy the self-hosted engine in a data center with
only one active data storage domain, and that storage domain is corrupted, you will not be
able to add new storage domains or remove the corrupted storage domain; you will have to
redeploy the self-hosted engine." Does this mean that we should have more than one
"Data" domain? or here this paragraph is talking about sharing a single domain
for both the hosted-engine and VMs?
2- the documentation mentioned that Replica 1 or Replica 3 are only supported, but is this
only for the hosted-engine volume? or also for Data volumes? so the max is only 3? and
waht if I wanted to expand capacity later?
Thank you,
4:03 p.m.
1 - use 100 GB for the HostedEngine VM, separate storage domain for the other VMs
2 - Replica 3 means that each VM disk will have 3 identical copies ( split into tiny
pieces) and usually you don't need more copies.When you decide to add more storage
-> you can add 3 more bricks (term for server+mountpoint) , expand the volume and then
rebalance (necessary in order to twll gluster about the new storage location and to
balance the usage among subvolumes)
Best Regards,Strahil Nikolov
On Tue, Apr 5, 2022 at 12:18,
mohamedroushdy@peopleintouch.com<mohamedroushdy(a)peopleintouch.com> wrote: Hello,
we are designing a new production cluster, and I have to questsions about GlusterFS
please:
1- this quote from the documentation os not clear to me "
Creating additional data domains in the same data center as the self-hosted engine storage
domain is highly recommended. If you deploy the self-hosted engine in a data center with
only one active data storage domain, and that storage domain is corrupted, you will not be
able to add new storage domains or remove the corrupted storage domain; you will have to
redeploy the self-hosted engine." Does this mean that we should have more than one
"Data" domain? or here this paragraph is talking about sharing a single domain
for both the hosted-engine and VMs?
2- the documentation mentioned that Replica 1 or Replica 3 are only supported, but is this
only for the hosted-engine volume? or also for Data volumes? so the max is only 3? and
waht if I wanted to expand capacity later?
Thank you,
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/7VKXYCFLK73...
3:41 a.m.
Thanks a lot for your answer. The thing is, we had data lose disaster last month, and
that's why we've decided to deploy a cmmpletely new environment for taht pirpose,
and let me tell you what happened. We are using Ovirt 4.1 with Gluster 3.8 for our
production, and the cluster contains five hosts, three of them are storage servers.
I've added two more hosts, and manually via CLI (as I couldn't do this via GUI)
created a new brick on one of the newely added nodes,and expanded the volume with the
parameter "replica = 4 as it was refused to expand without setting the replica
count. The action was successful for both the engine vol, and the data vol, however, few
minutes later we've found that the disk sizes (images) of the existing VMs got shrunk
and lost all of the data, and we had to recover from backup.. We can't afford another
downtime (another disaster I mean), that's why I'm so maticulous about what to do
next, so, is there a good guide around for the architecure and sizing?
Thank you,
7:41 a.m.
Can you check of the volume had 'cluster.lookup-optimize' enabled (on)?Most
probably it caused your problems .
For details check [1] [2]
Best Regards,Strahil Nikolov[1] https://access.redhat.com/solutions/5896761
[2]
https://lists.ovirt.org/archives/list/users@ovirt.org/thread/BEYIM56H2Q3P...
On Wed, Apr 6, 2022 at 10:42,
mohamedroushdy@peopleintouch.com<mohamedroushdy(a)peopleintouch.com> wrote: Thanks a
lot for your answer. The thing is, we had data lose disaster last month, and that's
why we've decided to deploy a cmmpletely new environment for taht pirpose, and let me
tell you what happened. We are using Ovirt 4.1 with Gluster 3.8 for our production, and
the cluster contains five hosts, three of them are storage servers. I've added two
more hosts, and manually via CLI (as I couldn't do this via GUI) created a new brick
on one of the newely added nodes,and expanded the volume with the parameter "replica
= 4 as it was refused to expand without setting the replica count. The action was
successful for both the engine vol, and the data vol, however, few minutes later we've
found that the disk sizes (images) of the existing VMs got shrunk and lost all of the
data, and we had to recover from backup.. We can't afford another downtime (another
disaster I mean), that's why I'm so maticulous about what to do next, so, is there
a good guide around for the architecure and sizing?
Thank you,
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/G4LS3BEUHYF...
9:50 a.m.
New subject: [Ext.] Re: Re: Storage Design Question - GlusterFS
Well, I think it’s not configured. Here’s the config:
Volume Name: data
Type: Replicate
Volume ID: 06cac4b9-3d6a-410b-93e6-4f876bbfcdd1
Status: Started
Snapshot Count: 0
Number of Bricks: 1 x 3 = 3
Transport-type: tcp
Bricks:
Brick1: server1:/gluster/data/brick1
Brick2: server2:/gluster/data/brick1
Brick3: server3:/gluster/data/brick1
Options Reconfigured:
features.shard-block-size: 512MB
storage.owner-gid: 36
storage.owner-uid: 36
user.cifs: off
features.shard: on
cluster.shd-wait-qlength: 10000
cluster.shd-max-threads: 8
cluster.locking-scheme: granular
cluster.data-self-heal-algorithm: full
cluster.server-quorum-type: server
cluster.quorum-type: auto
cluster.eager-lock: enable
network.remote-dio: enable
performance.low-prio-threads: 32
performance.stat-prefetch: off
performance.io-cache: off
performance.read-ahead: off
performance.quick-read: off
transport.address-family: inet
performance.readdir-ahead: on
nfs.disable: on
From: Strahil Nikolov <hunter86_bg(a)yahoo.com>
Sent: Wednesday, April 6, 2022 1:42 PM
To: Mohamed Roushdy <mohamedroushdy(a)peopleintouch.com>; users(a)ovirt.org
Subject: [Ext.] Re: [ovirt-users] Re: Storage Design Question - GlusterFS
[CAUTION: This email originated from outside of the organization. Do not click links or
open attachments unless you recognize the sender and know the content is safe]
Can you check of the volume had 'cluster.lookup-optimize' enabled (on)?
Most probably it caused your problems .
For details check [1] [2]
Best Regards,
Strahil Nikolov
[1] https://access.redhat.com/solutions/5896761
[2]
https://lists.ovirt.org/archives/list/users@ovirt.org/thread/BEYIM56H2Q3P...
On Wed, Apr 6, 2022 at 10:42,
mohamedroushdy@peopleintouch.com<mailto:mohamedroushdy@peopleintouch.com>
<mohamedroushdy@peopleintouch.com<mailto:mohamedroushdy@peopleintouch.com>>
wrote:
Thanks a lot for your answer. The thing is, we had data lose disaster last month, and
that's why we've decided to deploy a cmmpletely new environment for taht pirpose,
and let me tell you what happened. We are using Ovirt 4.1 with Gluster 3.8 for our
production, and the cluster contains five hosts, three of them are storage servers.
I've added two more hosts, and manually via CLI (as I couldn't do this via GUI)
created a new brick on one of the newely added nodes,and expanded the volume with the
parameter "replica = 4 as it was refused to expand without setting the replica
count. The action was successful for both the engine vol, and the data vol, however, few
minutes later we've found that the disk sizes (images) of the existing VMs got shrunk
and lost all of the data, and we had to recover from backup.. We can't afford another
downtime (another disaster I mean), that's why I'm so maticulous about what to do
next, so, is there a good guide around for the architecure and sizing?
Thank you,
_______________________________________________
Users mailing list -- users@ovirt.org<mailto:users@ovirt.org>
To unsubscribe send an email to
users-leave@ovirt.org<mailto:users-leave@ovirt.org>
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/G4LS3BEUHYF...
992
days inactive
993
days old
4 comments
3 participants
participants (3)
-
Mohamed Roushdy -
mohamedroushdy＠peopleintouch.com
-
Strahil Nikolov