12:21 p.m.
Hi all,
I'm about to lose one very important vm. I shut down this vm for
maintenance and then I moved the four disks to a new created lun. This
vm has 2 snapshots.
After successful move, the vm refuses to start with this message:
Bad volume specification {u'index': 0, u'domainID':
u'961ea94a-aced-4dd0-a9f0-266ce1810177', 'reqsize': '0',
u'format':
u'cow', u'bootOrder': u'1', u'discard': False,
u'volumeID':
u'a0b6d5cb-db1e-4c25-aaaf-1bbee142c60b', 'apparentsize':
'2147483648',
u'imageID': u'4a95614e-bf1d-407c-aa72-2df414abcb7a',
u'specParams': {},
u'readonly': u'false', u'iface': u'virtio',
u'optional': u'false',
u'deviceId': u'4a95614e-bf1d-407c-aa72-2df414abcb7a', 'truesize':
'2147483648', u'poolID': u'48ca3019-9dbf-4ef3-98e9-08105d396350',
u'device': u'disk', u'shared': u'false',
u'propagateErrors': u'off',
u'type': u'disk'}.
I tried to merge the snaphots, export , clone from snapshot, copy disks,
or deactivate disks and every action fails when it is about disk.
I began to dd lv group to get a new vm intended to a standalone
libvirt/kvm, the vm quite boots up but it is an outdated version before
the first snapshot. There is a lot of disks when doing a "lvs | grep
961ea94a" supposed to be disks snapshots. Which of them must I choose to
get the last vm before shutting down? I'm not used to deal snapshot with
virsh/libvirt, so some help will be much appreciated.
Is there some unknown command to recover this vm into ovirt?
Thank you in advance.
--
Nathanaël Blanchet
Supervision réseau
Pôle Infrastrutures Informatiques
227 avenue Professeur-Jean-Louis-Viala
34193 MONTPELLIER CEDEX 5
Tél. 33 (0)4 67 54 84 55
Fax 33 (0)4 67 54 84 14
blanchet(a)abes.fr
12:30 p.m.
Le 06/12/2017 à 11:21, Nathanaël Blanchet a écrit :
Hi all,
I'm about to lose one very important vm. I shut down this vm for
maintenance and then I moved the four disks to a new created lun. This
vm has 2 snapshots.
After successful move, the vm refuses to start with this message:
Bad volume specification {u'index': 0, u'domainID':
u'961ea94a-aced-4dd0-a9f0-266ce1810177', 'reqsize': '0',
u'format':
u'cow', u'bootOrder': u'1', u'discard': False,
u'volumeID':
u'a0b6d5cb-db1e-4c25-aaaf-1bbee142c60b', 'apparentsize':
'2147483648',
u'imageID': u'4a95614e-bf1d-407c-aa72-2df414abcb7a',
u'specParams': {},
u'readonly': u'false', u'iface': u'virtio',
u'optional': u'false',
u'deviceId': u'4a95614e-bf1d-407c-aa72-2df414abcb7a', 'truesize':
'2147483648', u'poolID': u'48ca3019-9dbf-4ef3-98e9-08105d396350',
u'device': u'disk', u'shared': u'false',
u'propagateErrors': u'off',
u'type': u'disk'}.
I tried to merge the snaphots, export , clone from snapshot, copy disks,
or deactivate disks and every action fails when it is about disk.
I began to dd lv group to get a new vm intended to a standalone
libvirt/kvm, the vm quite boots up but it is an outdated version before
the first snapshot. There is a lot of disks when doing a "lvs | grep
961ea94a" supposed to be disks snapshots. Which of them must I choose to
get the last vm before shutting down? I'm not used to deal snapshot with
virsh/libvirt, so some help will be much appreciated.
Is there some unknown command to recover this vm into ovirt?
Thank you in advance.
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
Beside specific oVirt answers, did you try to get informations about the
snapshot tree with qemu-img info --backing-chain on the adequate
/dev/... logical volume?
As you know how to dd from LVs, you could extract every needed snapshots
files and rebuild your VM outside of oVirt.
Then take time to re-import it later and safely.
--
Nicolas ECARNOT
4:56 p.m.
On Wed, Dec 6, 2017 at 12:30 PM, Nicolas Ecarnot <nicolas(a)ecarnot.net>
wrote:
Le 06/12/2017 à 11:21, Nathanaël Blanchet a écrit :
> Hi all,
>
> I'm about to lose one very important vm. I shut down this vm for
> maintenance and then I moved the four disks to a new created lun. This vm
> has 2 snapshots.
>
> After successful move, the vm refuses to start with this message:
>
> Bad volume specification {u'index': 0, u'domainID':
> u'961ea94a-aced-4dd0-a9f0-266ce1810177', 'reqsize': '0',
u'format':
> u'cow', u'bootOrder': u'1', u'discard': False,
u'volumeID':
> u'a0b6d5cb-db1e-4c25-aaaf-1bbee142c60b', 'apparentsize':
'2147483648
> <(214)%20748-3648>', u'imageID':
u'4a95614e-bf1d-407c-aa72-2df414abcb7a',
> u'specParams': {}, u'readonly': u'false', u'iface':
u'virtio', u'optional':
> u'false', u'deviceId':
u'4a95614e-bf1d-407c-aa72-2df414abcb7a',
> 'truesize': '2147483648 <(214)%20748-3648>',
u'poolID':
> u'48ca3019-9dbf-4ef3-98e9-08105d396350', u'device': u'disk',
u'shared':
> u'false', u'propagateErrors': u'off', u'type':
u'disk'}.
>
> I tried to merge the snaphots, export , clone from snapshot, copy disks,
> or deactivate disks and every action fails when it is about disk.
>
> I began to dd lv group to get a new vm intended to a standalone
> libvirt/kvm, the vm quite boots up but it is an outdated version before the
> first snapshot. There is a lot of disks when doing a "lvs | grep 961ea94a"
> supposed to be disks snapshots. Which of them must I choose to get the last
> vm before shutting down? I'm not used to deal snapshot with virsh/libvirt,
> so some help will be much appreciated.
>
The disks which you want to copy should contain the entire volume chain.
Based on the log you mentioned, It looks like this image is problematic:
storage id: '961ea94a-aced-4dd0-a9f0-266ce1810177',
imageID': u'4a95614e-bf1d-407c-aa72-2df414abcb7a
volumeID': u'a0b6d5cb-db1e-4c25-aaaf-1bbee142c60b'
What if you try to deactivate this image and try to run the VM, will it run?
> Is there some unknown command to recover this vm into ovirt?
>
> Thank you in advance.
>
>
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>
Beside specific oVirt answers, did you try to get informations about the
snapshot tree with qemu-img info --backing-chain on the adequate /dev/...
logical volume?
As you know how to dd from LVs, you could extract every needed snapshots
files and rebuild your VM outside of oVirt.
Then take time to re-import it later and safely.
--
Nicolas ECARNOT
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
2:48 p.m.
This is a multi-part message in MIME format.
--------------0D63922B81A7AF3D6E8C430C
Content-Type: text/plain; charset=utf-8; format=flowed
Content-Transfer-Encoding: quoted-printable
Le 06/12/2017 =C3=A0 15:56, Maor Lipchuk a =C3=A9crit=C2=A0:
<head <meta http-equiv=3D"Content-Type"
content=3D"text/html; charset=3Dutf=
-8" </head <body text=3D"#000000"
bgcolor=3D"#FFFFFF" <p><br </p
<br <div class=3D"moz-cite-prefix">Le
06/12/2017 =C3=A0 15:56, Maor Lipch=
uk a
=C3=A9crit=C2=A0:<br </div <blockquote type=3D"cite"
cite=3D"mid:CAJ1JNOfreVDtuZQaxMfpTaAi=3DgAmnOZzpLcpW8dkXmJBA9O6zg@mail.gm=
ail.com" <div
dir=3D"ltr"><br <div
class=3D"gmail_extra"><br
<div class=3D"gmail_quote">On Wed, Dec 6, 2017 at 12:30 PM,
Nicolas Ecarnot <span dir=3D"ltr"><<a
href=3D"mailto:nicolas@ecarnot.net" target=3D"_blank"
moz-do-not-send=3D"true">nicolas(a)ecarnot.net</a>&gt;</spa=
n wrote:<br
<blockquote class=3D"gmail_quote" style=3D"margin:0px 0px 0px
0.8ex;border-left:1px solid
rgb(204,204,204);padding-left:1ex"><span
class=3D"gmail-">L=
e
06/12/2017 =C3=A0 11:21, Nathana=C3=ABl Blanchet a =C3=A9=
crit=C2=A0:<br </span <blockquote class=3D"gmail_quote"
style=3D"margin:0px 0px 0=
px
0.8ex;border-left:1px solid
rgb(204,204,204);padding-left:1ex"><span
class=3D"gmail-"=
Hi all,<br
<br I'm about to
lose one very important vm. I shut down
this vm for maintenance and then I moved the four
disks to a new created lun. This vm has 2 snapshots.<br=
<br
After successful move, the vm refuses to start with
this message:<br
<br Bad volume
specification {u'index': 0, u'domainID':
u'961ea94a-aced-4dd0-a9f0-266c<wbr>e1810177',
'reqsize': '0', u'format': u'cow',
u'bootOrder': u'1',
u'discard': False, u'volumeID':
u'a0b6d5cb-db1e-4c25-aaaf-1bbe<wbr>e142c60b',
'apparentsize': '<a
href=3D"tel:%28214%29%20748-3648"
value=3D"+12147483648" target=3D"_blank"
moz-do-not-send=3D"true">2147483648</a>',
u'imageID':
u'4a95614e-bf1d-407c-aa72-2df4<wbr>14abcb7a',
u'specParams': {}, u'readonly': u'false',
u'iface':
u'virtio', u'optional': u'false',
u'deviceId':
u'4a95614e-bf1d-407c-aa72-2df4<wbr>14abcb7a',
'truesize': '<a
href=3D"tel:%28214%29%20748-3648"
value=3D"+12147483648" target=3D"_blank"
moz-do-not-send=3D"true">2147483648</a>',
u'poolID':
u'48ca3019-9dbf-4ef3-98e9-0810<wbr>5d396350',
u'device': u'disk', u'shared':
u'false',
u'propagateErrors': u'off', u'type':
u'disk'}.<br <br I tried to merge the snaphots, export , clone
from
snapshot, copy disks, or deactivate disks and every
action fails when it is about disk.<br
<br I began to dd lv
group to get a new vm intended to a
standalone libvirt/kvm, the vm quite boots up but it
is an outdated version before the first snapshot.
There is a lot of disks when doing a "lvs | grep
961ea94a" supposed to be disks snapshots. Which of
them must I choose to get the last vm before shutting
down? I'm not used to deal snapshot with
virsh/libvirt, so some help will be much appreciated.<b=
r </span></blockquote </blockquote
<div><br </div <div>The disks which you want to copy should
contain the
entire volume chain.</div
<div>Based on the log you mentioned, It looks like this
image is problematic:</div
<div><br </div <div>=C2=A0 storage id:
'961ea94a-aced-4dd0-a9f0-266c<wbr>e18=
10177',</div <div>=C2=A0
imageID': u'4a95614e-bf1d-407c-aa72-2df4<wbr>14ab=
cb7a<br </div <div>=C2=A0 volumeID':
u'a0b6d5cb-db1e-4c25-aaaf-1bbe<wbr>e14=
2c60b'</div <div><br </div
<div>What if you try to deactivate this image and try to run
the VM, will it run?</div
</div </div </div
</blockquote I already tried to do what you
suggest, but it is the same, and more
this disk is part of a volume groupe, so I can't boot the vm without
it.<br <blockquote
type=3D"cite"
cite=3D"mid:CAJ1JNOfreVDtuZQaxMfpTaAi=3DgAmnOZzpLcpW8dkXmJBA9O6zg@mail.gm=
ail.com" <div
dir=3D"ltr" <div
class=3D"gmail_extra" <div
class=3D"gmail_quote" <div><br </div
<div><br </div <div>=C2=A0</div <blockquote class=3D"gmail_quote"
style=3D"margin:0px 0px 0px
0.8ex;border-left:1px solid
rgb(204,204,204);padding-left:1ex"
<blockquote class=3D"gmail_quote" style=3D"margin:0px 0px 0=
px
0.8ex;border-left:1px solid
rgb(204,204,204);padding-left:1ex"><span
class=3D"gmail-"=
<br
Is there some unknown command to recover this vm into
ovirt?<br <br Thank you in advance.<br <br
<br
</span></blockquote </blockquote <div><br
</div <div><br </div
<div><br </div <div>=C2=A0</div <blockquote class=3D"gmail_quote"
style=3D"margin:0px 0px 0px
0.8ex;border-left:1px solid
rgb(204,204,204);padding-left:1ex"
<blockquote class=3D"gmail_quote" style=3D"margin:0px 0px 0=
px
0.8ex;border-left:1px solid
rgb(204,204,204);padding-left:1ex"><span
class=3D"gmail-"=
<br
</span
______________________________<wbr>_________________<br Users mailing list<br <a href=3D"mailto:Users@ovirt.org"
target=3D"_blank"
moz-do-not-send=3D"true">Users(a)ovirt.org</a><br <a
href=3D"http://lists.ovirt.org/mailman/listinfo/users"
rel=3D"noreferrer" target=3D"_blank"
moz-do-not-send=3D"true">http://lists.ovirt.org/mailman=
<wbr>/listinfo/users</a><br
<br </blockquote <br
Beside specific oVirt answers, did you try to get
informations about the snapshot tree with qemu-img info
--backing-chain on the adequate /dev/... logical volume?<br=
As you know how to dd from LVs, you could extract
every
needed snapshots files and rebuild your VM outside of
oVirt.<br Then take time to
re-import it later and safely.<span
class=3D"gmail-HOEnZb"><font
color=3D"#888888"><br
<br -- <br Nicolas ECARNOT<br
______________________________<wbr>_________________<br=
Users mailing list<br <a
href=3D"mailto:Users@ovirt.org" target=3D"_blank"
moz-do-not-send=3D"true">Users(a)ovirt.org</a><br <a
href=3D"http://lists.ovirt.org/mailman/listinfo/users=
"
rel=3D"noreferrer" target=3D"_blank"
moz-do-not-send=3D"true">http://lists.ovirt.org/mailm=
an<wbr>/listinfo/users</a><br
</font></span></blockquote
</div <br </div
</div <br <fieldset
class=3D"mimeAttachmentHeader"></fieldset
<br <pre
wrap=3D"">_______________________________________________
Users mailing list
<a class=3D"moz-txt-link-abbreviated"
href=3D"mailto:Users@ovirt.org">Use=
rs(a)ovirt.org</a <a
class=3D"moz-txt-link-freetext" href=3D"http://lists.ovirt.org/mailman=
/listinfo/users">http://lists.ovirt.org/mailman/listinfo/users</a </pre
</blockquote <br <pre class=3D"moz-signature"
cols=3D"72">--=20
Nathana=C3=ABl Blanchet
Supervision r=C3=A9seau
P=C3=B4le Infrastrutures Informatiques
227 avenue Professeur-Jean-Louis-Viala
34193 MONTPELLIER CEDEX 5 =09
T=C3=A9l. 33 (0)4 67 54 84 55
Fax 33 (0)4 67 54 84 14
<a class=3D"moz-txt-link-abbreviated"
href=3D"mailto:blanchet@abes.fr">bl=
anchet(a)abes.fr</a> </pre </body </html
--------------0D63922B81A7AF3D6E8C430C--
On Wed, Dec 6, 2017 at 12:30 PM, Nicolas Ecarnot <nicolas(a)ecarnot.net=20
<mailto:nicolas@ecarnot.net>> wrote:
Le 06/12/2017 =C3=A0 11:21, Nathana=C3=ABl Blanchet a =C3=A9crit=C2=
=A0:
Hi all,
I'm about to lose one very important vm. I shut down this vm
for maintenance and then I moved the four disks to a new
created lun. This vm has 2 snapshots.
After successful move, the vm refuses to start with this messag=
e:
Bad volume specification {u'index': 0, u'domainID':
u'961ea94a-aced-4dd0-a9f0-266ce1810177', 'reqsize': '0',
u'format': u'cow', u'bootOrder': u'1',
u'discard': False,
u'volumeID': u'a0b6d5cb-db1e-4c25-aaaf-1bbee142c60b',
'apparentsize': '2147483648 <tel:%28214%29%20748-3648>',
u'imageID': u'4a95614e-bf1d-407c-aa72-2df414abcb7a',
u'specParams': {}, u'readonly': u'false',
u'iface': u'virtio',
u'optional': u'false', u'deviceId':
u'4a95614e-bf1d-407c-aa72-2df414abcb7a', 'truesize':
'2147483648 <tel:%28214%29%20748-3648>', u'poolID':
u'48ca3019-9dbf-4ef3-98e9-08105d396350', u'device':
u'disk',
u'shared': u'false', u'propagateErrors': u'off',
u'type':
u'disk'}.
I tried to merge the snaphots, export , clone from snapshot,
copy disks, or deactivate disks and every action fails when it
is about disk.
I began to dd lv group to get a new vm intended to a
standalone libvirt/kvm, the vm quite boots up but it is an
outdated version before the first snapshot. There is a lot of
disks when doing a "lvs | grep 961ea94a" supposed to be disks
snapshots. Which of them must I choose to get the last vm
before shutting down? I'm not used to deal snapshot with
virsh/libvirt, so some help will be much appreciated.
The disks which you want to copy should contain the entire volume chain=
.
Based on the log you mentioned, It looks like this image is
problematic=
:
=C2=A0 storage id: '961ea94a-aced-4dd0-a9f0-266ce1810177',
=C2=A0 imageID': u'4a95614e-bf1d-407c-aa72-2df414abcb7a
=C2=A0 volumeID': u'a0b6d5cb-db1e-4c25-aaaf-1bbee142c60b'
What if you try to deactivate this image and try to run the VM, will=20
it run?
I already tried to do what you suggest, but it is the same, and more=20
this disk is part of a volume groupe, so I can't boot the vm without it.
Is there some unknown command to recover this vm into ovirt?
Thank you in advance.
_______________________________________________
Users mailing list
Users(a)ovirt.org <mailto:Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
<http://lists.ovirt.org/mailman/listinfo/users
Beside specific oVirt answers, did you try to get informations
about the snapshot tree with qemu-img info --backing-chain on the
adequate /dev/... logical volume?
As you know how to dd from LVs, you could extract every needed
snapshots files and rebuild your VM outside of oVirt.
Then take time to re-import it later and safely.
--=20
Nicolas ECARNOT
_______________________________________________
Users mailing list
Users(a)ovirt.org <mailto:Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
<http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
--=20
Nathana=C3=ABl Blanchet
Supervision r=C3=A9seau
P=C3=B4le Infrastrutures Informatiques
227 avenue Professeur-Jean-Louis-Viala
34193 MONTPELLIER CEDEX 5 =09
T=C3=A9l. 33 (0)4 67 54 84 55
Fax 33 (0)4 67 54 84 14
blanchet(a)abes.fr
--------------0D63922B81A7AF3D6E8C430C
Content-Type: text/html; charset=utf-8
Content-Transfer-Encoding: quoted-printable
<html
3:32 p.m.
This is just a shot in the dark, but have you tried to use the disk copy
feature? You can copy the disks back to where they were and try starting
the VM
On Thu, Dec 7, 2017 at 7:48 AM, Nathanaël Blanchet <blanchet(a)abes.fr> wrote:
Le 06/12/2017 à 15:56, Maor Lipchuk a écrit :
On Wed, Dec 6, 2017 at 12:30 PM, Nicolas Ecarnot <nicolas(a)ecarnot.net>
wrote:
> Le 06/12/2017 à 11:21, Nathanaël Blanchet a écrit :
>
>> Hi all,
>>
>> I'm about to lose one very important vm. I shut down this vm for
>> maintenance and then I moved the four disks to a new created lun. This vm
>> has 2 snapshots.
>>
>> After successful move, the vm refuses to start with this message:
>>
>> Bad volume specification {u'index': 0, u'domainID':
>> u'961ea94a-aced-4dd0-a9f0-266ce1810177', 'reqsize': '0',
u'format':
>> u'cow', u'bootOrder': u'1', u'discard': False,
u'volumeID':
>> u'a0b6d5cb-db1e-4c25-aaaf-1bbee142c60b', 'apparentsize':
'2147483648
>> <%28214%29%20748-3648>', u'imageID':
u'4a95614e-bf1d-407c-aa72-2df414abcb7a',
>> u'specParams': {}, u'readonly': u'false',
u'iface': u'virtio', u'optional':
>> u'false', u'deviceId':
u'4a95614e-bf1d-407c-aa72-2df414abcb7a',
>> 'truesize': '2147483648 <%28214%29%20748-3648>',
u'poolID':
>> u'48ca3019-9dbf-4ef3-98e9-08105d396350', u'device':
u'disk', u'shared':
>> u'false', u'propagateErrors': u'off', u'type':
u'disk'}.
>>
>> I tried to merge the snaphots, export , clone from snapshot, copy disks,
>> or deactivate disks and every action fails when it is about disk.
>>
>> I began to dd lv group to get a new vm intended to a standalone
>> libvirt/kvm, the vm quite boots up but it is an outdated version before the
>> first snapshot. There is a lot of disks when doing a "lvs | grep
961ea94a"
>> supposed to be disks snapshots. Which of them must I choose to get the last
>> vm before shutting down? I'm not used to deal snapshot with virsh/libvirt,
>> so some help will be much appreciated.
>>
>
The disks which you want to copy should contain the entire volume chain.
Based on the log you mentioned, It looks like this image is problematic:
storage id: '961ea94a-aced-4dd0-a9f0-266ce1810177',
imageID': u'4a95614e-bf1d-407c-aa72-2df414abcb7a
volumeID': u'a0b6d5cb-db1e-4c25-aaaf-1bbee142c60b'
What if you try to deactivate this image and try to run the VM, will it
run?
I already tried to do what you suggest, but it is the same, and more this
disk is part of a volume groupe, so I can't boot the vm without it.
>
>> Is there some unknown command to recover this vm into ovirt?
>>
>> Thank you in advance.
>>
>>
>>
>
>> _______________________________________________
>> Users mailing list
>> Users(a)ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>
>>
> Beside specific oVirt answers, did you try to get informations about the
> snapshot tree with qemu-img info --backing-chain on the adequate /dev/...
> logical volume?
> As you know how to dd from LVs, you could extract every needed snapshots
> files and rebuild your VM outside of oVirt.
> Then take time to re-import it later and safely.
>
> --
> Nicolas ECARNOT
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
_______________________________________________
Users mailing listUsers@ovirt.orghttp://lists.ovirt.org/mailman/listinfo/users
--
Nathanaël Blanchet
Supervision réseau
Pôle Infrastrutures Informatiques
227 avenue Professeur-Jean-Louis-Viala
34193 MONTPELLIER CEDEX 5
Tél. 33 (0)4 67 54 84 55
Fax 33 (0)4 67 54 84 14blanchet(a)abes.fr
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
3:35 p.m.
This is a multi-part message in MIME format.
--------------971266E2430C4915C301D09A
Content-Type: text/plain; charset=utf-8; format=flowed
Content-Transfer-Encoding: quoted-printable
Le 07/12/2017 =C3=A0 14:32, Donny Davis a =C3=A9crit=C2=A0:
> Hi all,
> I'm about to lose one very important vm. I
shut down this
> vm for maintenance and then I moved the four disks to a
> new created lun. This vm has 2 snapshots.
> After successful move, the vm refuses to start
with this
> message:
> Bad volume specification {u'index': 0,
u'domainID':
> u'961ea94a-aced-4dd0-a9f0-266ce1810177', 'reqsize':
'0',
> u'format': u'cow', u'bootOrder': u'1',
u'discard': False,
> u'volumeID': u'a0b6d5cb-db1e-4c25-aaaf-1bbee142c60b',
> 'apparentsize': '2147483648
<tel:%28214%29%20748-3648>',
> u'imageID': u'4a95614e-bf1d-407c-aa72-2df414abcb7a',
> u'specParams': {}, u'readonly': u'false',
u'iface':
> u'virtio', u'optional': u'false',
u'deviceId':
> u'4a95614e-bf1d-407c-aa72-2df414abcb7a', 'truesize':
> '2147483648 <tel:%28214%29%20748-3648>',
u'poolID':
> u'48ca3019-9dbf-4ef3-98e9-08105d396350', u'device':
> u'disk', u'shared': u'false',
u'propagateErrors': u'off',
> u'type': u'disk'}.
> I tried to merge the snaphots, export , clone
from
> snapshot, copy disks, or deactivate disks and every
> action fails when it is about disk.
> I began to dd lv group to get a new vm
intended to a
> standalone libvirt/kvm, the vm quite boots up but it is
> an outdated version before the first snapshot. There is a
> lot of disks when doing a "lvs | grep 961ea94a" supposed
> to be disks snapshots. Which of them must I choose to get
> the last vm before shutting down? I'm not used to deal
> snapshot with virsh/libvirt, so some help will be much
> appreciated.
> The disks which you want to
copy should contain the entire volume
> chain.
> Based on the log you mentioned, It looks like this image is
> problematic:
> =C2=A0 storage id:
'961ea94a-aced-4dd0-a9f0-266ce1810177',
> =C2=A0 imageID': u'4a95614e-bf1d-407c-aa72-2df414abcb7a
> =C2=A0 volumeID': u'a0b6d5cb-db1e-4c25-aaaf-1bbee142c60b'
> What if you try to deactivate this image and try to
run the VM,
> will it run?
I already tried to do what you suggest, but it is the same, and
more this disk is part of a volume groupe, so I can't boot the vm
without it.
>
Is there some unknown command to recover this vm into ovir= t?
> Thank you in
advance.
>
_______________________________________________
> Users mailing list
> Users(a)ovirt.org <mailto:Users@ovirt.org >
http://lists.ovirt.org/mailman/listinfo/users
> <http://lists.ovirt.org/mailman/listinfo/users >
Beside specific oVirt answers, did you try to get
> informations about the snapshot tree with qemu-img info
> --backing-chain on the adequate /dev/... logical volume?
> As you know how to dd from LVs, you could extract every
> needed snapshots files and rebuild your VM outside of oVirt.
> Then take time to re-import it later and safely.
> --=20
> Nicolas ECARNOT
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org <mailto:Users@ovirt.org >
http://lists.ovirt.org/mailman/listinfo/users
> <http://lists.ovirt.org/mailman/listinfo/users >
_______________________________________________
> Users mailing list
> Users(a)ovirt.org <mailto:Users@ovirt.org >
http://lists.ovirt.org/mailman/listinfo/users
> <http://lists.ovirt.org/mailman/listinfo/users
--=20
Nathana=C3=ABl Blanchet
Supervision r=C3=A9seau
P=C3=B4le Infrastrutures Informatiques
227 avenue Professeur-Jean-Louis-Viala
34193 MONTPELLIER CEDEX 5 =09
T=C3=A9l. 33 (0)4 67 54 84 55
Fax 33 (0)4 67 54 84 14
blanchet(a)abes.fr <mailto:blanchet@abes.fr> =20
_______________________________________________
Users mailing list
Users(a)ovirt.org <mailto:Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
<http://lists.ovirt.org/mailman/listinfo/users
--=20
Nathana=C3=ABl Blanchet
Supervision r=C3=A9seau
P=C3=B4le Infrastrutures Informatiques
227 avenue Professeur-Jean-Louis-Viala
34193 MONTPELLIER CEDEX 5 =09
T=C3=A9l. 33 (0)4 67 54 84 55
Fax 33 (0)4 67 54 84 14
blanchet(a)abes.fr
--------------971266E2430C4915C301D09A
Content-Type: text/html; charset=utf-8
Content-Transfer-Encoding: quoted-printable
<html <head <meta http-equiv=3D"Content-Type"
content=3D"text/html; charset=3Dutf=
-8" </head <body text=3D"#000000"
bgcolor=3D"#FFFFFF" <p><br </p
<br <div class=3D"moz-cite-prefix">Le
07/12/2017 =C3=A0 14:32, Donny Davi=
s a
=C3=A9crit=C2=A0:<br </div <blockquote type=3D"cite"
cite=3D"mid:CAMHmko_gbFuw0f4D3oKsss0jkVXbn+=3Do82N08BZQ4d87WSC4ag@mail.gm=
ail.com" <div
dir=3D"ltr">This is just a shot in the dark,=C2=A0 but have yo=
u
tried to use the disk copy feature? You can copy the disks back
to where they were and try starting the VM</div
</blockquote No it doesn't work, the
reason is always the same, some disks
reference on the lun were broken...<br
<blockquote type=3D"cite"
cite=3D"mid:CAMHmko_gbFuw0f4D3oKsss0jkVXbn+=3Do82N08BZQ4d87WSC4ag@mail.gm=
ail.com" <div
class=3D"gmail_extra"><br
<div class=3D"gmail_quote">On Thu, Dec 7, 2017 at 7:48 AM,
Nathana=C3=ABl Blanchet <span dir=3D"ltr"><<a
href=3D"mailto:blanchet@abes.fr" target=3D"_blank"
moz-do-not-send=3D"true">blanchet(a)abes.fr</a>&gt;</span wrote:<br
<blockquote class=3D"gmail_quote" style=3D"margin:0 0 0
.8ex;border-left:1px #ccc solid;padding-left:1ex" <div text=3D"#000000"
bgcolor=3D"#FFFFFF"><span class=3D"" <p><br
</p <br <div
class=3D"m_-3443482866820998840moz-cite-prefix">Le
06/12/2017 =C3=A0 15:56, Maor Lipchuk a =C3=A9crit=C2=A0=
:<br </div
<blockquote type=3D"cite"
<div dir=3D"ltr"><br
<div class=3D"gmail_extra"><br
<div class=3D"gmail_quote">On Wed, Dec 6, 2017 at
12:30 PM, Nicolas Ecarnot <span
dir=3D"ltr"><<=
a
href=3D"mailto:nicolas@ecarnot.net"
target=3D"_blank"
moz-do-not-send=3D"true">ni=
colas(a)ecarnot.net</a>&gt;</span
wrote:<br
<blockquote class=3D"gmail_quote"
style=3D"margin:0px 0px 0px
0.8ex;border-left:1px solid
rgb(204,204,204);padding-left:1ex"><span
class=3D"m_-3443482866820998840gmail-">Le
06/12/2017 =C3=A0 11:21, Nathana=C3=ABl Blanc=
het a
=C3=A9crit=C2=A0:<br
</span
<blockquote class=3D"gmail_quote"
style=3D"margin:0px 0px 0px
0.8ex;border-left:1px solid
rgb(204,204,204);padding-left:1ex"><span
class=3D"m_-3443482866820998840gmail-"> Hi
all,<br
<br
I'm about to lose one very important vm. I
shut down this vm for maintenance and then
I moved the four disks to a new created
lun. This vm has 2 snapshots.<br <br After successful move, the vm
refuses to
start with this message:<br
<br Bad
volume specification {u'index': 0,
u'domainID':
u'961ea94a-aced-4dd0-a9f0-266c<wbr>e1810177=
',
'reqsize': '0', u'format':
u'cow',
u'bootOrder': u'1', u'discard':
False,
u'volumeID':
u'a0b6d5cb-db1e-4c25-aaaf-1bbe<wbr>e142c60b=
',
'apparentsize': '<a
href=3D"tel:%28214%29%20748-3648"
value=3D"+12147483648"
target=3D"_blank"
moz-do-not-send=3D"true">2147483648</a>',
u'imageID': u'4a95614e-bf1d-407c-aa72-2df4<=
wbr>14abcb7a',
u'specParams': {}, u'readonly':
u'false',
u'iface': u'virtio', u'optional':
u'false', u'deviceId':
u'4a95614e-bf1d-407c-aa72-2df4<wbr>14abcb7a=
',
'truesize': '<a
href=3D"tel:%28214%29%20748-3648"
value=3D"+12147483648"
target=3D"_blank"
moz-do-not-send=3D"true">2147483648</a>',
u'poolID': u'48ca3019-9dbf-4ef3-98e9-0810<w=
br>5d396350',
u'device': u'disk', u'shared':
u'false',
u'propagateErrors': u'off',
u'type':
u'disk'}.<br
<br I
tried to merge the snaphots, export ,
clone from snapshot, copy disks, or
deactivate disks and every action fails
when it is about disk.<br
<br I
began to dd lv group to get a new vm
intended to a standalone libvirt/kvm, the
vm quite boots up but it is an outdated
version before the first snapshot. There
is a lot of disks when doing a "lvs | grep
961ea94a" supposed to be disks snapshots.
Which of them must I choose to get the
last vm before shutting down? I'm not used
to deal snapshot with virsh/libvirt, so
some help will be much appreciated.<br </span></blockquote </blockquote <div><br </div
<div>The disks which you want to copy should
contain the entire volume chain.</div <div>Based on the log you
mentioned, It looks
like this image is problematic:</div <div><br </div
<div>=C2=A0 storage id:
'961ea94a-aced-4dd0-a9f0-266ce<wbr>1810177',</d=
iv <div>=C2=A0 imageID':
u'4a95614e-bf1d-407c-aa72-2=
df4<wbr>14abcb7a<br </div <div>=C2=A0 volumeID':
u'a0b6d5cb-db1e-4c25-aaaf-=
1bbe<wbr>e142c60b'</div
<div><br </div <div>What if you try to
deactivate this image
and try to run the VM, will it run?</div </div
</div </div </blockquote
</span> I already tried to do what you suggest, but it is
the same, and more this disk is part of a volume groupe,
so I can't boot the vm without it.<span
class=3D""><br <blockquote
type=3D"cite" <div
dir=3D"ltr" <div
class=3D"gmail_extra" <div
class=3D"gmail_quote"
<div><br </div <div><br </div
<div>=C2=A0</div
<blockquote class=3D"gmail_quote"
style=3D"margin:0px 0px 0px
0.8ex;border-left:1px solid
rgb(204,204,204);padding-left:1ex" <blockquote
class=3D"gmail_quote"
style=3D"margin:0px 0px 0px
0.8ex;border-left:1px solid
rgb(204,204,204);padding-left:1ex"><span
class=3D"m_-3443482866820998840gmail-">
<br=
Is there some unknown command to
recover
this vm into ovirt?<br
<br Thank
you in advance.<br
<br <br </span></blockquote </blockquote <div><br </div
<div><br </div <div><br </div
<div>=C2=A0</div
<blockquote class=3D"gmail_quote"
style=3D"margin:0px 0px 0px
0.8ex;border-left:1px solid
rgb(204,204,204);padding-left:1ex" <blockquote
class=3D"gmail_quote"
style=3D"margin:0px 0px 0px
0.8ex;border-left:1px solid
rgb(204,204,204);padding-left:1ex"><span
class=3D"m_-3443482866820998840gmail-">
<br=
</span>
______________________________<wbr>__=
_______________<br Users
mailing list<br <a
href=3D"mailto:Users@ovirt.org"
target=3D"_blank"
moz-do-not-send=3D"true">=
Users(a)ovirt.org</a><br <a
href=3D"http://lists.ovirt.org/mailman/list=
info/users"
rel=3D"noreferrer" target=3D"_blank"
moz-do-not-send=3D"true">http://lists.ovirt=
.org/mailman<wbr>/listinfo/users</a><br
<br
</blockquote <br Beside specific oVirt answers, did
you try to
get informations about the snapshot tree with
qemu-img info --backing-chain on the adequate
/dev/... logical volume?<br
As you know how to dd from LVs, you could
extract every needed snapshots files and
rebuild your VM outside of oVirt.<br Then take time to re-import it later
and
safely.<span
class=3D"m_-3443482866820998840gmail-HOEnZb">=
<font
color=3D"#888888"><br <br -- <br Nicolas ECARNOT<br
______________________________<wbr>________=
_________<br Users
mailing list<br <a
href=3D"mailto:Users@ovirt.org"
target=3D"_blank" moz-do-not-send=3D"true=
">Users(a)ovirt.org</a><br
<a
href=3D"http://lists.ovirt.org/mailman/li=
stinfo/users"
rel=3D"noreferrer" target=3D"_blank"
moz-do-not-send=3D"true">http://lists.ovi=
rt.org/mailman<wbr>/listinfo/users</a><br
</font></span></blockquote
</div <br </div
</div <br <fieldset
class=3D"m_-3443482866820998840mimeAttachmentHeader">=
</fieldset <br
<pre>______________________________<wbr>_______________=
__
Users mailing list
<a class=3D"m_-3443482866820998840moz-txt-link-abbreviated"
href=3D"mailt=
o:Users@ovirt.org" target=3D"_blank"
moz-do-not-send=3D"true">Users@ovirt=
.org</a <a
class=3D"m_-3443482866820998840moz-txt-link-freetext" href=3D"http://l=
ists.ovirt.org/mailman/listinfo/users" target=3D"_blank"
moz-do-not-send=3D=
"true">http://lists.ovirt.org/<wbr>mailman/listinfo/users</a </pre
</blockquote <br </span><span class=3D"" <pre
class=3D"m_-3443482866820998840moz-signature" cols=3D=
"72">--=20
Nathana=C3=ABl Blanchet
Supervision r=C3=A9seau
P=C3=B4le Infrastrutures Informatiques
227 avenue Professeur-Jean-Louis-Viala
34193 MONTPELLIER CEDEX 5 =09
T=C3=A9l. 33 (0)4 67 54 84 55
Fax 33 (0)4 67 54 84 14
<a class=3D"m_-3443482866820998840moz-txt-link-abbreviated"
href=3D"mailt=
o:blanchet@abes.fr" target=3D"_blank"
moz-do-not-send=3D"true">blanchet@a=
bes.fr</a> </pre
</span></div <br
______________________________<wbr>_________________<br Users mailing list<br <a href=3D"mailto:Users@ovirt.org"
moz-do-not-send=3D"true">U=
sers(a)ovirt.org</a><br <a
href=3D"http://lists.ovirt.org/mailman/listinfo/users"
rel=3D"noreferrer" target=3D"_blank"
moz-do-not-send=3D"tru=
e">http://lists.ovirt.org/<wbr>mailman/listinfo/users</a... <br
</blockquote </div <br
</div </blockquote <br
<pre class=3D"moz-signature" cols=3D"72">--=20
Nathana=C3=ABl Blanchet
Supervision r=C3=A9seau
P=C3=B4le Infrastrutures Informatiques
227 avenue Professeur-Jean-Louis-Viala
34193 MONTPELLIER CEDEX 5 =09
T=C3=A9l. 33 (0)4 67 54 84 55
Fax 33 (0)4 67 54 84 14
<a class=3D"moz-txt-link-abbreviated"
href=3D"mailto:blanchet@abes.fr">bl=
anchet(a)abes.fr</a> </pre </body </html
--------------971266E2430C4915C301D09A--
This is just a shot in the dark,=C2=A0 but have you tried to use the
di=
sk=20
copy feature? You can copy the disks back to where they were and
try=20
starting the VM
No it doesn't work, the reason is always the same, some disks
reference=20
on the lun were broken...
On Thu, Dec 7, 2017 at 7:48 AM, Nathana=C3=ABl Blanchet <blanchet(a)abes.=
fr=20
<mailto:blanchet@abes.fr>> wrote:
Le 06/12/2017 =C3=A0 15:56, Maor Lipchuk a =C3=A9crit=C2=A0:
> On Wed, Dec 6, 2017 at
12:30 PM, Nicolas Ecarnot
> <nicolas(a)ecarnot.net <mailto:nicolas@ecarnot.net>> wrote:
> Le 06/12/2017 =C3=A0 11:21, Nathana=C3=ABl
Blanchet a =C3=A9cr=
it=C2=A0:
3:32 p.m.
This is a multi-part message in MIME format.
--------------21CE01923A1840D4FE07ECE7
Content-Type: text/plain; charset=utf-8; format=flowed
Content-Transfer-Encoding: quoted-printable
Many thanks to Nicolas who saved my life!
When the export of disks (base + snapshot) has finished, I managed to=20
boot up the vm into libvirt/kvm with the top disk snapshot as the main di=
sk.
Then, I believed reimporting the vm was the last thing to do, but=20
integrated virt-v2v doesn't support importing vm with external=20
snapshots, so when the importing process has finished, I couldn't boot=20
up the vm.
I had to merge the snapshots with qemu tools:
qemu-img rebase-b base.raw snap2.qcow2
qemu-img commit snap2.qcow2
And then, attaching the base image of each disk to the libvirt vm before=20
reimporting it chosing "preallocated" for raw disks.
This is a manual method, but it was first necessary to find the disk id=20
into lvm thanks to ovirt-shell: list disks --query "name=3Dhortensia*"=20
--show-all.
When finding the volume group id corresponding to the vm, I had to=20
activate all the logical volume with lvchange -ay /dev/... and then=20
finding qcow2 information with qemu-img info --backing-chain
*In this specific desastry, is there something to do with ovirt itself=20
instead of exporting/reimporting, knowing that vm disks on the lun are=20
intact, while the main reason is that the reference to some disks are=20
broken into database?*
Le 06/12/2017 =C3=A0 11:30, Nicolas Ecarnot a =C3=A9crit=C2=A0:
> I began to dd lv group to get a
new vm intended to a standalone=20
> libvirt/kvm, the vm quite boots up but it is an outdated version=20
> before the first snapshot. There is a lot of disks when doing a "lvs=20
> | grep 961ea94a" supposed to be disks snapshots. Which of them must I=20
> choose to get the last vm before shutting down? I'm not used to deal=20
> snapshot with virsh/libvirt, so some help will be much appreciated.
> Is there some unknown command to recover this vm into
ovirt?
> Thank you in advance.
>
_______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
Beside specific oVirt answers, did you try to get informations about=20
the snapshot tree with qemu-img info --backing-chain on the adequate=20
/dev/... logical volume?
As you know how to dd from LVs, you could extract every needed=20
snapshots files and rebuild your VM outside of oVirt.
Then take time to re-import it later and safely.
--=20
Nathana=C3=ABl Blanchet
Supervision r=C3=A9seau
P=C3=B4le Infrastrutures Informatiques
227 avenue Professeur-Jean-Louis-Viala
34193 MONTPELLIER CEDEX 5 =09
T=C3=A9l. 33 (0)4 67 54 84 55
Fax 33 (0)4 67 54 84 14
blanchet(a)abes.fr
--------------21CE01923A1840D4FE07ECE7
Content-Type: text/html; charset=utf-8
Content-Transfer-Encoding: quoted-printable
<html <head <meta http-equiv=3D"Content-Type"
content=3D"text/html; charset=3Dutf=
-8" </head <body text=3D"#000000"
bgcolor=3D"#FFFFFF" <p>Many thanks to Nicolas
who saved my life!</p <p>When the export of
disks (base + snapshot) has finished, I
managed to boot up the vm into libvirt/kvm with the top disk
snapshot as the main disk.<br
Then, I believed reimporting the vm was the last thing to do, but
integrated virt-v2v doesn't support importing vm with external
snapshots, so when the importing process has finished, I couldn't
boot up the vm. <br I had to merge the snapshots
with qemu tools:</p <pre class=3D"bash"
style=3D"font-family:monospace;">qemu-img rebase =
<span style=3D"color: #660033;">-b</span> base.raw snap2.qcow2
qemu-img commit snap2.qcow2
<font size=3D"+1" </font></pre <p>And then, attaching the base image of each disk to
the libvirt vm
before reimporting it chosing "preallocated" for raw disks. <br </p
<p>This is a manual method<font size=3D"+1">, but it was first
necessary to</font> find the disk id into lvm thanks to
ovirt-shell: list disks --query "name=3Dhortensia*" --show-all.</p <p>When finding the volume group id corresponding to
the vm, I had
to activate all the logical volume with lvchange -ay /dev/... and
then finding qcow2 information with qemu-img info --backing-chain</=
p <p><b>In this specific desastry, is there
something to do with ovirt
itself instead of exporting/reimporting, knowing that vm disks
on the lun are intact, while the main reason is that the
reference to some disks are broken into database?</b><br <font size=3D"+1"></font></p <br
<div class=3D"moz-cite-prefix">Le 06/12/2017 =C3=A0 11:30, Nicolas Ec=
arnot
a =C3=A9crit=C2=A0:<br </div <blockquote type=3D"cite"
cite=3D"mid:a61581e7-2a34-2351-df71-1bf44cfc82e4@ecarnot.net">Le
06/12/2017 =C3=A0 11:21, Nathana=C3=ABl Blanchet a =C3=A9crit=C2=A0=
:
<br <blockquote
type=3D"cite">Hi all,
<br <br I'm about to lose one very important vm. I shut
down this vm for
maintenance and then I moved the four disks to a new created
lun. This vm has 2 snapshots.
<br <br After successful move, the vm refuses to start with
this
message:
<br <br Bad volume specification {u'index': 0,
u'domainID':
u'961ea94a-aced-4dd0-a9f0-266ce1810177', 'reqsize': '0',
u'format': u'cow', u'bootOrder': u'1',
u'discard': False,
u'volumeID': u'a0b6d5cb-db1e-4c25-aaaf-1bbee142c60b',
'apparentsize': '2147483648', u'imageID':
u'4a95614e-bf1d-407c-aa72-2df414abcb7a', u'specParams': {},
u'readonly': u'false', u'iface': u'virtio',
u'optional':
u'false', u'deviceId':
u'4a95614e-bf1d-407c-aa72-2df414abcb7a',
'truesize': '2147483648', u'poolID':
u'48ca3019-9dbf-4ef3-98e9-08105d396350', u'device':
u'disk',
u'shared': u'false', u'propagateErrors': u'off',
u'type':
u'disk'}.
<br <br I tried to merge the snaphots, export , clone from
snapshot,
copy disks, or deactivate disks and every action fails when it
is about disk.
<br <br I began to dd lv group to get a new vm intended to a
standalone
libvirt/kvm, the vm quite boots up but it is an outdated version
before the first snapshot. There is a lot of disks when doing a
"lvs | grep 961ea94a" supposed to be disks snapshots. Which of
them must I choose to get the last vm before shutting down? I'm
not used to deal snapshot with virsh/libvirt, so some help will
be much appreciated.
<br <br Is there some unknown command to recover this vm into
ovirt?
<br <br Thank you in advance.
<br <br <br
<br _______________________________________________
<br Users mailing list
<br <a
class=3D"moz-txt-link-abbreviated" href=3D"mailto:Users@ovirt.=
org">Users(a)ovirt.org</a <br <a class=3D"moz-txt-link-freetext"
href=3D"http://lists.ovirt.org=
/mailman/listinfo/users">http://lists.ovirt.org/mailman/listinfo/users</a=
<br
<br </blockquote
<br Beside specific oVirt answers, did you try to get
informations
about the snapshot tree with qemu-img info --backing-chain on the
adequate /dev/... logical volume?
<br As you know how to dd from
LVs, you could extract every needed
snapshots files and rebuild your VM outside of oVirt.
<br Then take time to re-import it
later and safely.
<br <br </blockquote
<br <pre class=3D"moz-signature"
cols=3D"72">--=20
Nathana=C3=ABl Blanchet
Supervision r=C3=A9seau
P=C3=B4le Infrastrutures Informatiques
227 avenue Professeur-Jean-Louis-Viala
34193 MONTPELLIER CEDEX 5 =09
T=C3=A9l. 33 (0)4 67 54 84 55
Fax 33 (0)4 67 54 84 14
<a class=3D"moz-txt-link-abbreviated"
href=3D"mailto:blanchet@abes.fr">bl=
anchet(a)abes.fr</a> </pre </body </html
--------------21CE01923A1840D4FE07ECE7--
Le 06/12/2017 =C3=A0 11:21, Nathana=C3=ABl Blanchet a
=C3=A9crit=C2=A0:
> Hi all,
> I'm about to lose one very important vm. I shut down
this vm for=20
> maintenance and then I moved the four disks to a new created lun.=20
> This vm has 2 snapshots.
> After successful move, the vm refuses to start with this
message:
> Bad volume specification {u'index': 0,
u'domainID':=20
> u'961ea94a-aced-4dd0-a9f0-266ce1810177', 'reqsize': '0',
u'format':=20
> u'cow', u'bootOrder': u'1', u'discard': False,
u'volumeID':=20
> u'a0b6d5cb-db1e-4c25-aaaf-1bbee142c60b', 'apparentsize':=20
> '2147483648', u'imageID':
u'4a95614e-bf1d-407c-aa72-2df414abcb7a',=20
> u'specParams': {}, u'readonly': u'false', u'iface':
u'virtio',=20
> u'optional': u'false', u'deviceId':=20
> u'4a95614e-bf1d-407c-aa72-2df414abcb7a', 'truesize':
'2147483648',=20
> u'poolID': u'48ca3019-9dbf-4ef3-98e9-08105d396350',
u'device':=20
> u'disk', u'shared': u'false', u'propagateErrors':
u'off', u'type':=20
> u'disk'}.
> I tried to merge the snaphots, export , clone from
snapshot, copy=20
> disks, or deactivate disks and every action fails when it is about dis=
k.
2542
days inactive
2543
days old
6 comments
4 participants
participants (4)
-
Donny Davis -
Maor Lipchuk -
Nathanaël Blanchet -
Nicolas Ecarnot