3:45 p.m.
The oVirt Project is pleased to announce the general availability of its sixth formal
release, oVirt 3.5, as of October 17, 2014.
oVirt is an open source alternative to VMware vSphere, and provides an excellent KVM
management interface for multi-node virtualization. oVirt is
available now for Fedora 19, Fedora 20, Red Hat Enterprise Linux 6.5, and CentOS 6.5 (or
similar) and allow you to use Red Hat Enterprise Linux 7 and
CentOS 7 too as node and for running Hosted Engine.
New features include:
Live Merge
----------
If an image has one or more snapshots, oVirt 3.5's merge command will combine the data
of one volume into another. Live merges can be performed with
data is pulled from one snapshot into another snapshot. The engine can merge multiple
disks at the same time and each merge can independently fail or
succeed in each operation.
Import Storage Domain
This latest release expands oVirt's feature of importing ISOs and exporting storage
domains to expand support for importing an existing data storage
domain. Based on information stored in the storage domain, oVirt can revive entities such
as disks, virtual machines, and templates in the setup of
any data center to which the storage domain is attached.
Advanced Foreman Integration
----------------------------
oVirt 3.5 adds the capability to provision and add hypervisors to oVirt from bare metal.
Foreman is a complete lifecycle management tool for physical
and virtual servers. Through deep integration with configuration management, DHCP, DNS,
TFTP, and PXE-based unattended installations, Foreman manages
every stage of the lifecycle of your physical or virtual servers. Integrating Foreman with
oVirt helps add hypervisor hosts managed by Foreman to the
oVirt engine.
Enhanced Authentication, Authorization and Accounting Support
-------------------------------------------------------------
A new architecture has been built for oVirt 3.5's authentication, authorization and
accounting (AAA) system. The enhancements will provide a clear
separation of authentication from authorization and provide a developer API to develop
custom extensions for authentication and authorization.
New PatternFly Interface
------------------------
oVirt 3.5 will have a new look and feel, using PatternFly, the open interface project. The
new look and feel aims to maintain the colors and spirit
associated with oVirt, while updating it with a new, modern, sleek, and minimal look. The
minimal design allows complex screens to look cleaner and
airier, and lets the user focus on the data and the tasks by removing all extraneous
visual elements.
Advanced Scheduling with Optaplanner
------------------------------------
The Optaplanner is a new service that takes a snapshot of a cluster (a list of hosts and
VMs) and computes an optimized VM-to-Host assignment
solution. Optimization will is done on per Cluster basis. The administrator can use this
information as a hint to tweak the cluster to better utilize
resources.
This release of oVirt also includes numerous bug fixes. See the release notes [1] for a
complete list of the new features and bugs fixed.
A new repository has been created and will be automatically enabled by installing /
upgrading ovirt-release35 package.
See release notes page for further instructions about install / upgrade.
A new oVirt Live iso is also available [2] and a new oVirt Node iso will be available
soon.
[1] http://www.ovirt.org/OVirt_3.5_Release_Notes
[2] http://resources.ovirt.org/pub/ovirt-3.5/iso/ovirt-live-el6-3.5.0.iso
--
Sandro Bonazzola
Better technology. Faster innovation. Powered by community collaboration.
See how it works at redhat.com
7:57 p.m.
Hi.
So I upgraded to 3.5, rebooted my Centos 6.5 VM and I still seem to be
running oVirt Engine Version: 3.4.4-1.el6. Is there something additional
that I need to do to switch to 3.5?
[root@ovirt ~]# yum localinstall
http://resources.ovirt.org/pub/yum-repo/ovirt-release35.rpm
Loaded plugins: fastestmirror, versionlock
Setting up Local Package Process
ovirt-release35.rpm | 8.5 kB
00:00
Examining /var/tmp/yum-root-CB02va/ovirt-release35.rpm:
ovirt-release35-001-1.noarch
Marking /var/tmp/yum-root-CB02va/ovirt-release35.rpm to be installed
Loading mirror speeds from cached hostfile
* base: centos.mirrors.tds.net
* epel: mirror.cc.columbia.edu
* extras: mirrors.gigenet.com
* ovirt-3.4-epel: mirror.cc.columbia.edu
* ovirt-3.4-jpackage-6.0-generic: sunsite.informatik.rwth-aachen.de
* ovirt-3.4-stable: www.gtlib.gatech.edu
* updates: mirror.thelinuxfix.com
Resolving Dependencies
--> Running transaction check
---> Package ovirt-release35.noarch 0:001-1 will be installed
--> Finished Dependency Resolution
Dependencies Resolved
================================================================================
Package Arch Version Repository
Size
================================================================================
Installing:
ovirt-release35 noarch 001-1 /ovirt-release35
6.3 k
Transaction Summary
================================================================================
Install 1 Package(s)
Total size: 6.3 k
Installed size: 6.3 k
Is this ok [y/N]: y
Downloading Packages:
Running rpm_check_debug
Running Transaction Test
Transaction Test Succeeded
Running Transaction
Installing : ovirt-release35-001-1.noarch
1/1
Verifying : ovirt-release35-001-1.noarch
1/1
Installed:
ovirt-release35.noarch 0:001-1
Complete!
[root@ovirt ~]# yum update
Loaded plugins: fastestmirror, versionlock
Loading mirror speeds from cached hostfile
ovirt-3.5-epel/metalink | 15 kB
00:00
* base: centos.mirrors.tds.net
* epel: mirror.cc.columbia.edu
* extras: mirrors.gigenet.com
* ovirt-3.4-epel: mirror.cc.columbia.edu
* ovirt-3.4-jpackage-6.0-generic: sunsite.informatik.rwth-aachen.de
* ovirt-3.4-stable: www.gtlib.gatech.edu
* ovirt-3.5: www.gtlib.gatech.edu
* ovirt-3.5-epel: less.cogeco.net
* ovirt-3.5-jpackage-6.0-generic: sunsite.informatik.rwth-aachen.de
* updates: mirror.thelinuxfix.com
ovirt-3.5 | 2.9 kB
00:00
ovirt-3.5/primary_db | 60 kB
00:00
ovirt-3.5-epel | 4.4 kB
00:00
ovirt-3.5-epel/primary_db | 6.3 MB
00:00
ovirt-3.5-glusterfs-epel | 2.9 kB
00:00
ovirt-3.5-glusterfs-epel/primary_db | 12 kB
00:00
ovirt-3.5-glusterfs-noarch-epel | 2.9 kB
00:00
ovirt-3.5-glusterfs-noarch-epel/primary_db | 2.2 kB
00:00
ovirt-3.5-jpackage-6.0-generic | 951 B
00:00
ovirt-3.5-jpackage-6.0-generic/primary | 1.3 MB
00:03
ovirt-3.5-jpackage-6.0-generic
5495/5495
ovirt-3.5-patternfly1-noarch-epel | 3.0 kB
00:00
ovirt-3.5-patternfly1-noarch-epel/primary_db | 2.3 kB
00:00
Setting up Update Process
Resolving Dependencies
--> Running transaction check
---> Package otopi.noarch 0:1.2.3-1.el6 will be updated
---> Package otopi.noarch 0:1.3.0-1.el6 will be an update
---> Package otopi-java.noarch 0:1.2.3-1.el6 will be updated
---> Package otopi-java.noarch 0:1.3.0-1.el6 will be an update
---> Package ovirt-engine-cli.noarch 0:3.4.0.5-1.el6 will be updated
---> Package ovirt-engine-cli.noarch 0:3.5.0.5-1.el6 will be an update
---> Package ovirt-engine-lib.noarch 0:3.4.4-1.el6 will be updated
---> Package ovirt-engine-lib.noarch 0:3.5.0.1-1.el6 will be an update
---> Package ovirt-engine-sdk-python.noarch 0:3.4.4.0-1.el6 will be updated
---> Package ovirt-engine-sdk-python.noarch 0:3.5.0.7-1.el6 will be an
update
---> Package ovirt-engine-setup.noarch 0:3.4.4-1.el6 will be updated
---> Package ovirt-engine-setup.noarch 0:3.5.0.1-1.el6 will be an update
---> Package ovirt-engine-setup-base.noarch 0:3.4.4-1.el6 will be updated
---> Package ovirt-engine-setup-base.noarch 0:3.5.0.1-1.el6 will be an
update
--> Processing Dependency: python-paramiko for package:
ovirt-engine-setup-base-3.5.0.1-1.el6.noarch
---> Package ovirt-engine-setup-plugin-ovirt-engine.noarch 0:3.4.4-1.el6
will be updated
---> Package ovirt-engine-setup-plugin-ovirt-engine.noarch 0:3.5.0.1-1.el6
will be an update
---> Package ovirt-engine-setup-plugin-ovirt-engine-common.noarch
0:3.4.4-1.el6 will be updated
---> Package ovirt-engine-setup-plugin-ovirt-engine-common.noarch
0:3.5.0.1-1.el6 will be an update
---> Package ovirt-engine-setup-plugin-websocket-proxy.noarch 0:3.4.4-1.el6
will be updated
---> Package ovirt-engine-setup-plugin-websocket-proxy.noarch
0:3.5.0.1-1.el6 will be an update
---> Package ovirt-engine-websocket-proxy.noarch 0:3.4.4-1.el6 will be
updated
---> Package ovirt-engine-websocket-proxy.noarch 0:3.5.0.1-1.el6 will be an
update
--> Processing Dependency: numpy for package:
ovirt-engine-websocket-proxy-3.5.0.1-1.el6.noarch
---> Package ovirt-host-deploy.noarch 0:1.2.3-1.el6 will be updated
---> Package ovirt-host-deploy.noarch 0:1.3.0-1.el6 will be an update
---> Package ovirt-host-deploy-java.noarch 0:1.2.3-1.el6 will be updated
---> Package ovirt-host-deploy-java.noarch 0:1.3.0-1.el6 will be an update
---> Package ovirt-image-uploader.noarch 0:3.4.3-1.el6 will be updated
---> Package ovirt-image-uploader.noarch 0:3.5.0-1.el6 will be an update
---> Package ovirt-iso-uploader.noarch 0:3.4.4-1.el6 will be updated
---> Package ovirt-iso-uploader.noarch 0:3.5.0-1.el6 will be an update
--> Running transaction check
---> Package numpy.x86_64 0:1.4.1-9.el6 will be installed
--> Processing Dependency: python-nose for package: numpy-1.4.1-9.el6.x86_64
--> Processing Dependency: libptf77blas.so.3()(64bit) for package:
numpy-1.4.1-9.el6.x86_64
--> Processing Dependency: libptcblas.so.3()(64bit) for package:
numpy-1.4.1-9.el6.x86_64
--> Processing Dependency: liblapack.so.3()(64bit) for package:
numpy-1.4.1-9.el6.x86_64
--> Processing Dependency: libgfortran.so.3()(64bit) for package:
numpy-1.4.1-9.el6.x86_64
--> Processing Dependency: libatlas.so.3()(64bit) for package:
numpy-1.4.1-9.el6.x86_64
---> Package python-paramiko.noarch 0:1.7.5-2.1.el6 will be installed
--> Processing Dependency: python-crypto >= 1.9 for package:
python-paramiko-1.7.5-2.1.el6.noarch
--> Running transaction check
---> Package atlas.x86_64 0:3.8.4-2.el6 will be installed
---> Package libgfortran.x86_64 0:4.4.7-4.el6 will be installed
---> Package python-crypto.x86_64 0:2.0.1-22.el6 will be installed
---> Package python-nose.noarch 0:0.10.4-3.1.el6 will be installed
--> Finished Dependency Resolution
Dependencies Resolved
================================================================================
Package Arch Version Repository
Size
================================================================================
Updating:
otopi noarch 1.3.0-1.el6 ovirt-3.5
133 k
otopi-java noarch 1.3.0-1.el6 ovirt-3.5
23 k
ovirt-engine-cli noarch 3.5.0.5-1.el6 ovirt-3.5
219 k
ovirt-engine-lib noarch 3.5.0.1-1.el6 ovirt-3.5
20 k
ovirt-engine-sdk-python noarch 3.5.0.7-1.el6 ovirt-3.5
834 k
ovirt-engine-setup noarch 3.5.0.1-1.el6 ovirt-3.5
3.9 k
ovirt-engine-setup-base noarch 3.5.0.1-1.el6 ovirt-3.5
91 k
ovirt-engine-setup-plugin-ovirt-engine noarch 3.5.0.1-1.el6 ovirt-3.5
147 k
ovirt-engine-setup-plugin-ovirt-engine-common
noarch 3.5.0.1-1.el6 ovirt-3.5
59 k
ovirt-engine-setup-plugin-websocket-proxy
noarch 3.5.0.1-1.el6 ovirt-3.5
21 k
ovirt-engine-websocket-proxy noarch 3.5.0.1-1.el6 ovirt-3.5
13 k
ovirt-host-deploy noarch 1.3.0-1.el6 ovirt-3.5
78 k
ovirt-host-deploy-java noarch 1.3.0-1.el6 ovirt-3.5
7.7 k
ovirt-image-uploader noarch 3.5.0-1.el6 ovirt-3.5
192 k
ovirt-iso-uploader noarch 3.5.0-1.el6 ovirt-3.5
53 k
Installing for dependencies:
atlas x86_64 3.8.4-2.el6 base
2.8 M
libgfortran x86_64 4.4.7-4.el6 base
265 k
numpy x86_64 1.4.1-9.el6 base
2.3 M
python-crypto x86_64 2.0.1-22.el6 base
159 k
python-nose noarch 0.10.4-3.1.el6 base
220 k
python-paramiko noarch 1.7.5-2.1.el6 base
728 k
Transaction Summary
================================================================================
Install 6 Package(s)
Upgrade 15 Package(s)
Total download size: 8.3 M
Is this ok [y/N]: y
Downloading Packages:
(1/21): atlas-3.8.4-2.el6.x86_64.rpm
| 2.8 MB 00:00
(2/21): libgfortran-4.4.7-4.el6.x86_64.rpm
| 265 kB 00:00
(3/21): numpy-1.4.1-9.el6.x86_64.rpm
| 2.3 MB 00:00
(4/21): otopi-1.3.0-1.el6.noarch.rpm
| 133 kB 00:00
(5/21): otopi-java-1.3.0-1.el6.noarch.rpm
| 23 kB 00:00
(6/21): ovirt-engine-cli-3.5.0.5-1.el6.noarch.rpm
| 219 kB 00:00
(7/21): ovirt-engine-lib-3.5.0.1-1.el6.noarch.rpm
| 20 kB 00:00
(8/21): ovirt-engine-sdk-python-3.5.0.7-1.el6.noarch.rpm
| 834 kB 00:00
(9/21): ovirt-engine-setup-3.5.0.1-1.el6.noarch.rpm
| 3.9 kB 00:00
(10/21): ovirt-engine-setup-base-3.5.0.1-1.el6.noarch.rpm
| 91 kB 00:00
(11/21): ovirt-engine-setup-plugin-ovirt-engine-3.5.0.1-1.el6.noarch.rpm
| 147 kB 00:00
(12/21):
ovirt-engine-setup-plugin-ovirt-engine-common-3.5.0.1-1.el6.noarch.rpm
| 59 kB 00:00
(13/21):
ovirt-engine-setup-plugin-websocket-proxy-3.5.0.1-1.el6.noarch.rpm
| 21 kB 00:00
(14/21): ovirt-engine-websocket-proxy-3.5.0.1-1.el6.noarch.rpm
| 13 kB 00:00
(15/21): ovirt-host-deploy-1.3.0-1.el6.noarch.rpm
| 78 kB 00:00
(16/21): ovirt-host-deploy-java-1.3.0-1.el6.noarch.rpm
| 7.7 kB 00:00
(17/21): ovirt-image-uploader-3.5.0-1.el6.noarch.rpm
| 192 kB 00:00
(18/21): ovirt-iso-uploader-3.5.0-1.el6.noarch.rpm
| 53 kB 00:00
(19/21): python-crypto-2.0.1-22.el6.x86_64.rpm
| 159 kB 00:00
(20/21): python-nose-0.10.4-3.1.el6.noarch.rpm
| 220 kB 00:00
(21/21): python-paramiko-1.7.5-2.1.el6.noarch.rpm
| 728 kB 00:00
--------------------------------------------------------------------------------------------------------------------------------------------
Total
5.5 MB/s | 8.3 MB 00:01
Running rpm_check_debug
Running Transaction Test
Transaction Test Succeeded
Running Transaction
Updating : ovirt-engine-sdk-python-3.5.0.7-1.el6.noarch
1/36
Updating : otopi-1.3.0-1.el6.noarch
2/36
Installing : libgfortran-4.4.7-4.el6.x86_64
3/36
Updating : ovirt-engine-lib-3.5.0.1-1.el6.noarch
4/36
Installing : atlas-3.8.4-2.el6.x86_64
5/36
Updating : ovirt-host-deploy-1.3.0-1.el6.noarch
6/36
Updating : otopi-java-1.3.0-1.el6.noarch
7/36
Installing : python-nose-0.10.4-3.1.el6.noarch
8/36
Installing : numpy-1.4.1-9.el6.x86_64
9/36
Installing : python-crypto-2.0.1-22.el6.x86_64
10/36
Installing : python-paramiko-1.7.5-2.1.el6.noarch
11/36
Updating : ovirt-engine-setup-base-3.5.0.1-1.el6.noarch
12/36
Updating :
ovirt-engine-setup-plugin-ovirt-engine-common-3.5.0.1-1.el6.noarch
13/36
Updating : ovirt-engine-setup-plugin-ovirt-engine-3.5.0.1-1.el6.noarch
14/36
Updating :
ovirt-engine-setup-plugin-websocket-proxy-3.5.0.1-1.el6.noarch
15/36
Updating : ovirt-engine-websocket-proxy-3.5.0.1-1.el6.noarch
16/36
Updating : ovirt-engine-setup-3.5.0.1-1.el6.noarch
17/36
Updating : ovirt-host-deploy-java-1.3.0-1.el6.noarch
18/36
Updating : ovirt-image-uploader-3.5.0-1.el6.noarch
19/36
Updating : ovirt-iso-uploader-3.5.0-1.el6.noarch
20/36
Updating : ovirt-engine-cli-3.5.0.5-1.el6.noarch
21/36
Cleanup : ovirt-host-deploy-java-1.2.3-1.el6.noarch
22/36
Cleanup : ovirt-engine-websocket-proxy-3.4.4-1.el6.noarch
23/36
Cleanup : ovirt-engine-setup-plugin-websocket-proxy-3.4.4-1.el6.noarch
24/36
Cleanup : otopi-java-1.2.3-1.el6.noarch
25/36
Cleanup : ovirt-host-deploy-1.2.3-1.el6.noarch
26/36
Cleanup : ovirt-engine-cli-3.4.0.5-1.el6.noarch
27/36
Cleanup : ovirt-iso-uploader-3.4.4-1.el6.noarch
28/36
Cleanup : ovirt-image-uploader-3.4.3-1.el6.noarch
29/36
Cleanup : ovirt-engine-setup-3.4.4-1.el6.noarch
30/36
Cleanup : ovirt-engine-setup-plugin-ovirt-engine-3.4.4-1.el6.noarch
31/36
Cleanup :
ovirt-engine-setup-plugin-ovirt-engine-common-3.4.4-1.el6.noarch
32/36
Cleanup : ovirt-engine-setup-base-3.4.4-1.el6.noarch
33/36
Cleanup : otopi-1.2.3-1.el6.noarch
34/36
Cleanup : ovirt-engine-lib-3.4.4-1.el6.noarch
35/36
Cleanup : ovirt-engine-sdk-python-3.4.4.0-1.el6.noarch
36/36
Verifying : ovirt-engine-setup-3.5.0.1-1.el6.noarch
1/36
Verifying : numpy-1.4.1-9.el6.x86_64
2/36
Verifying : python-crypto-2.0.1-22.el6.x86_64
3/36
Verifying : ovirt-engine-websocket-proxy-3.5.0.1-1.el6.noarch
4/36
Verifying : otopi-1.3.0-1.el6.noarch
5/36
Verifying : ovirt-image-uploader-3.5.0-1.el6.noarch
6/36
Verifying : atlas-3.8.4-2.el6.x86_64
7/36
Verifying : python-paramiko-1.7.5-2.1.el6.noarch
8/36
Verifying : python-nose-0.10.4-3.1.el6.noarch
9/36
Verifying : ovirt-iso-uploader-3.5.0-1.el6.noarch
10/36
Verifying :
ovirt-engine-setup-plugin-ovirt-engine-common-3.5.0.1-1.el6.noarch
11/36
Verifying :
ovirt-engine-setup-plugin-websocket-proxy-3.5.0.1-1.el6.noarch
12/36
Verifying : ovirt-engine-setup-plugin-ovirt-engine-3.5.0.1-1.el6.noarch
13/36
Verifying : ovirt-engine-lib-3.5.0.1-1.el6.noarch
14/36
Verifying : ovirt-engine-setup-base-3.5.0.1-1.el6.noarch
15/36
Verifying : ovirt-engine-sdk-python-3.5.0.7-1.el6.noarch
16/36
Verifying : ovirt-host-deploy-java-1.3.0-1.el6.noarch
17/36
Verifying : libgfortran-4.4.7-4.el6.x86_64
18/36
Verifying : ovirt-engine-cli-3.5.0.5-1.el6.noarch
19/36
Verifying : ovirt-host-deploy-1.3.0-1.el6.noarch
20/36
Verifying : otopi-java-1.3.0-1.el6.noarch
21/36
Verifying : otopi-java-1.2.3-1.el6.noarch
22/36
Verifying : ovirt-engine-cli-3.4.0.5-1.el6.noarch
23/36
Verifying : ovirt-engine-sdk-python-3.4.4.0-1.el6.noarch
24/36
Verifying : ovirt-engine-setup-base-3.4.4-1.el6.noarch
25/36
Verifying : otopi-1.2.3-1.el6.noarch
26/36
Verifying : ovirt-image-uploader-3.4.3-1.el6.noarch
27/36
Verifying : ovirt-host-deploy-java-1.2.3-1.el6.noarch
28/36
Verifying : ovirt-engine-setup-3.4.4-1.el6.noarch
29/36
Verifying : ovirt-engine-lib-3.4.4-1.el6.noarch
30/36
Verifying : ovirt-engine-websocket-proxy-3.4.4-1.el6.noarch
31/36
Verifying :
ovirt-engine-setup-plugin-ovirt-engine-common-3.4.4-1.el6.noarch
32/36
Verifying : ovirt-iso-uploader-3.4.4-1.el6.noarch
33/36
Verifying : ovirt-engine-setup-plugin-websocket-proxy-3.4.4-1.el6.noarch
34/36
Verifying : ovirt-engine-setup-plugin-ovirt-engine-3.4.4-1.el6.noarch
35/36
Verifying : ovirt-host-deploy-1.2.3-1.el6.noarch
36/36
Dependency Installed:
atlas.x86_64 0:3.8.4-2.el6 libgfortran.x86_64 0:4.4.7-4.el6
numpy.x86_64 0:1.4.1-9.el6 python-crypto.x86_64 0:2.0.1-22.el6
python-nose.noarch 0:0.10.4-3.1.el6 python-paramiko.noarch 0:1.7.5-2.1.el6
Updated:
otopi.noarch 0:1.3.0-1.el6
otopi-java.noarch 0:1.3.0-1.el6
ovirt-engine-cli.noarch 0:3.5.0.5-1.el6
ovirt-engine-lib.noarch 0:3.5.0.1-1.el6
ovirt-engine-sdk-python.noarch 0:3.5.0.7-1.el6
ovirt-engine-setup.noarch 0:3.5.0.1-1.el6
ovirt-engine-setup-base.noarch 0:3.5.0.1-1.el6
ovirt-engine-setup-plugin-ovirt-engine.noarch 0:3.5.0.1-1.el6
ovirt-engine-setup-plugin-ovirt-engine-common.noarch 0:3.5.0.1-1.el6
ovirt-engine-setup-plugin-websocket-proxy.noarch 0:3.5.0.1-1.el6
ovirt-engine-websocket-proxy.noarch 0:3.5.0.1-1.el6
ovirt-host-deploy.noarch 0:1.3.0-1.el6
ovirt-host-deploy-java.noarch 0:1.3.0-1.el6
ovirt-image-uploader.noarch 0:3.5.0-1.el6
ovirt-iso-uploader.noarch 0:3.5.0-1.el6
Complete!
[root@ovirt ~]# service ovirt restart
ovirt: unrecognized service
[root@ovirt ~]# /etc/init.d/ovirt-
ovirt-engine ovirt-engine-notifier ovirt-websocket-proxy
[root@ovirt ~]# /etc/init.d/ovirt-engine restart
Stopping oVirt Engine: [ OK ]
Starting oVirt Engine: [ OK ]
[root@ovirt ~]# /etc/init.d/ovirt-engine-notifier restart
Stopping oVirt Engine Notifier: [FAILED]
Starting oVirt Engine Notifier:
Validation result:
stderr: No transport is enabled, nothing to do
Validation failed returncode is 1:
[FAILED]
[root@ovirt ~]# shutdown -r now
Broadcast message from root@ovirt
(/dev/pts/0) at 9:52 ...
The system is going down for reboot NOW!
On Fri, Oct 17, 2014 at 7:45 AM, Sandro Bonazzola <sbonazzo(a)redhat.com>
wrote:
The oVirt Project is pleased to announce the general availability of
its
sixth formal release, oVirt 3.5, as of October 17, 2014.
oVirt is an open source alternative to VMware vSphere, and provides an
excellent KVM management interface for multi-node virtualization. oVirt is
available now for Fedora 19, Fedora 20, Red Hat Enterprise Linux 6.5, and
CentOS 6.5 (or similar) and allow you to use Red Hat Enterprise Linux 7 and
CentOS 7 too as node and for running Hosted Engine.
New features include:
Live Merge
----------
If an image has one or more snapshots, oVirt 3.5's merge command will
combine the data of one volume into another. Live merges can be performed
with
data is pulled from one snapshot into another snapshot. The engine can
merge multiple disks at the same time and each merge can independently fail
or
succeed in each operation.
Import Storage Domain
This latest release expands oVirt's feature of importing ISOs and
exporting storage domains to expand support for importing an existing data
storage
domain. Based on information stored in the storage domain, oVirt can
revive entities such as disks, virtual machines, and templates in the setup
of
any data center to which the storage domain is attached.
Advanced Foreman Integration
----------------------------
oVirt 3.5 adds the capability to provision and add hypervisors to oVirt
from bare metal. Foreman is a complete lifecycle management tool for
physical
and virtual servers. Through deep integration with configuration
management, DHCP, DNS, TFTP, and PXE-based unattended installations,
Foreman manages
every stage of the lifecycle of your physical or virtual servers.
Integrating Foreman with oVirt helps add hypervisor hosts managed by
Foreman to the
oVirt engine.
Enhanced Authentication, Authorization and Accounting Support
-------------------------------------------------------------
A new architecture has been built for oVirt 3.5's authentication,
authorization and accounting (AAA) system. The enhancements will provide a
clear
separation of authentication from authorization and provide a developer
API to develop custom extensions for authentication and authorization.
New PatternFly Interface
------------------------
oVirt 3.5 will have a new look and feel, using PatternFly, the open
interface project. The new look and feel aims to maintain the colors and
spirit
associated with oVirt, while updating it with a new, modern, sleek, and
minimal look. The minimal design allows complex screens to look cleaner and
airier, and lets the user focus on the data and the tasks by removing all
extraneous visual elements.
Advanced Scheduling with Optaplanner
------------------------------------
The Optaplanner is a new service that takes a snapshot of a cluster (a
list of hosts and VMs) and computes an optimized VM-to-Host assignment
solution. Optimization will is done on per Cluster basis. The
administrator can use this information as a hint to tweak the cluster to
better utilize
resources.
This release of oVirt also includes numerous bug fixes. See the release
notes [1] for a complete list of the new features and bugs fixed.
A new repository has been created and will be automatically enabled by
installing / upgrading ovirt-release35 package.
See release notes page for further instructions about install / upgrade.
A new oVirt Live iso is also available [2] and a new oVirt Node iso will
be available soon.
[1] http://www.ovirt.org/OVirt_3.5_Release_Notes
[2] http://resources.ovirt.org/pub/ovirt-3.5/iso/ovirt-live-el6-3.5.0.iso
--
Sandro Bonazzola
Better technology. Faster innovation. Powered by community collaboration.
See how it works at redhat.com
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
8:04 p.m.
You didn't follow The upgrade instructions...
http://www.ovirt.org/OVirt_3.5_Release_Notes#Install_.2F_Upgrade_from_Pre...
9:34 p.m.
--Apple-Mail-D8C7A4FC-E663-4676-BE1B-71508EEBFC9F
Content-Type: text/plain;
charset=us-ascii
Content-Transfer-Encoding: quoted-printable
"If you are upgrading from a previous version, you should have the ovirt-rel=
ease34 package already installed on your system. You can then install ovirt-=
release35.rpm as in a clean install side-by-side."
I followed this, but I'm certain what it means.
Sent from my iPad
On Oct 18, 2014, at 12:04 PM, Gianluca Cecchi
<gianluca.cecchi(a)gmail.com> w=
rote:
=20
You didn't follow The upgrade instructions...
http://www.ovirt.org/OVirt_3.5_Release_Notes#Install_.2F_Upgrade_from_Prev=
ious_Versions
--Apple-Mail-D8C7A4FC-E663-4676-BE1B-71508EEBFC9F
Content-Type: text/html;
charset=utf-8
Content-Transfer-Encoding: 7bit
<html><head><meta http-equiv="content-type"
content="text/html; charset=utf-8"></head><body
dir="auto"><div>"<span style="background-color: rgba(255,
255, 255, 0);">If you are upgrading from a previous version, you should have the
ovirt-release34 package already installed on your system. You can then install
ovirt-release35.rpm as in a clean install
side-by-side."</span></div><div><span
style="background-color: rgba(255, 255, 255,
0);"><br></span></div><div><span
style="background-color: rgba(255, 255, 255, 0);">I followed this, but
I'm certain what it means.</span></div><div><br>Sent from my
iPad</div><div><br>On Oct 18, 2014, at 12:04 PM, Gianluca Cecchi
<<a
href="mailto:gianluca.cecchi@gmail.com">gianluca.cecchi@gmail.com</a>>
wrote:<br><br></div><blockquote
type="cite"><div><p dir="ltr">You didn't follow The
upgrade instructions...<br>
<a
href="http://www.ovirt.org/OVirt_3.5_Release_Notes#Install_.2F_Upgra...
</div></blockquote></body></html>
--Apple-Mail-D8C7A4FC-E663-4676-BE1B-71508EEBFC9F--
9:49 p.m.
On 10/18/2014 09:34 PM, Ryan Nix wrote:
"If you are upgrading from a previous version, you should have
the
ovirt-release34 package already installed on your system. You can then
install ovirt-release35.rpm as in a clean install side-by-side."
I followed this, but I'm certain what it means.
the step you are missing is running 'engine-setup' after the yum update.
Sent from my iPad
On Oct 18, 2014, at 12:04 PM, Gianluca Cecchi <gianluca.cecchi(a)gmail.com
<mailto:gianluca.cecchi@gmail.com>> wrote:
> You didn't follow The upgrade instructions...
>
http://www.ovirt.org/OVirt_3.5_Release_Notes#Install_.2F_Upgrade_from_Pre...
>
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
9:50 p.m.
Seems you are missing the engine-setup step, cause in the screen you
attached, you have just restarted ovirt-engine before running engine-setup
.
Thanks,
Mohyedeen
On Sat, Oct 18, 2014 at 9:34 PM, Ryan Nix <ryan.nix(a)gmail.com> wrote:
"If you are upgrading from a previous version, you should have
the
ovirt-release34 package already installed on your system. You can then
install ovirt-release35.rpm as in a clean install side-by-side."
I followed this, but I'm certain what it means.
Sent from my iPad
On Oct 18, 2014, at 12:04 PM, Gianluca Cecchi <gianluca.cecchi(a)gmail.com>
wrote:
You didn't follow The upgrade instructions...
http://www.ovirt.org/OVirt_3.5_Release_Notes#Install_.2F_Upgrade_from_Pre...
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
10:27 p.m.
--Apple-Mail-2F141835-03AE-4CF7-85D1-D8D10BEDC9CE
Content-Type: text/plain;
charset=us-ascii
Content-Transfer-Encoding: quoted-printable
Ah, I see. Thanks to all!
Sent from my iPhone
On Oct 18, 2014, at 1:50 PM, Mohyedeen Nazzal
<mohyedeen.nazzal(a)gmail.com>=
wrote:
=20
Seems you are missing the engine-setup step, cause in the screen you attac=
hed,
you have just restarted ovirt-engine before running engine-setup .=20
=20
Thanks,
Mohyedeen
=20
> On Sat, Oct 18, 2014 at 9:34 PM, Ryan Nix <ryan.nix(a)gmail.com> wrote:
> "If you are upgrading from a previous version, you should have the ovirt-=
release34 package already installed on your system. You can then install ovi=
rt-release35.rpm as in a clean install side-by-side."
>=20
> I followed this, but I'm certain what it means.
>=20
> Sent from my iPad
>=20
>> On Oct 18, 2014, at 12:04 PM, Gianluca Cecchi <gianluca.cecchi(a)gmail.com=
wrote:
>>=20
>> You didn't follow The upgrade instructions...
>> http://www.ovirt.org/OVirt_3.5_Release_Notes#Install_.2F_Upgrade_from_Pr=
evious_Versions
>>=20
>=20
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
=20
--Apple-Mail-2F141835-03AE-4CF7-85D1-D8D10BEDC9CE
Content-Type: text/html;
charset=utf-8
Content-Transfer-Encoding: quoted-printable
<html><head><meta http-equiv=3D"content-type"
content=3D"text/html; charset=3D=
utf-8"></head><body dir=3D"auto"><div>Ah, I see.
Thanks to all!<br><br=
Sent from my iPhone</div><div><br>On Oct 18, 2014,
at 1:50 PM, Mohyedeen Na=
zzal <<a
href=3D"mailto:mohyedeen.nazzal@gmail.com">mohyedeen.nazzal@gmai=
l.com</a>> wrote:<br><br></div><blockquote
type=3D"cite"><div><div dir=3D=
"ltr">Seems you are missing the engine-setup step, cause in the screen you
a=
ttached, you have just restarted ovirt-engine before running engine-setup .&=
nbsp;<div><br></div><div>Thanks,</div><div>Mohyedeen</div></div><div
class=3D=
"gmail_extra"><br><div class=3D"gmail_quote">On Sat,
Oct 18, 2014 at 9:34 PM=
, Ryan Nix <span dir=3D"ltr"><<a
href=3D"mailto:ryan.nix@gmail.com" targe=
t=3D"_blank">ryan.nix(a)gmail.com</a>&gt;</span>
wrote:<br><blockquote class=3D=
"gmail_quote" style=3D"margin:0 0 0 .8ex;border-left:1px #ccc
solid;padding-=
left:1ex"><div dir=3D"auto"><div>"<span
style=3D"background-color:rgba(255,2=
55,255,0)">If you are upgrading from a previous version, you should have the=
ovirt-release34 package already installed on your system. You can then inst=
all ovirt-release35.rpm as in a clean install
side-by-side."</span></div><di=
v><span
style=3D"background-color:rgba(255,255,255,0)"><br></span></div><div=
<span style=3D"background-color:rgba(255,255,255,0)">I
followed this, but I=
'm certain what it
means.</span></div><div><br>Sent from my iPad</div><span
c=
lass=3D""><div><br>On Oct 18, 2014, at 12:04 PM, Gianluca Cecchi
<<a href=
=3D"mailto:gianluca.cecchi@gmail.com"
target=3D"_blank">gianluca.cecchi@gmai=
l.com</a>> wrote:<br><br></div><blockquote
type=3D"cite"><div><p dir=3D"l=
tr">You didn't follow The upgrade instructions...<br>
<a href=3D"http://www.ovirt.org/OVirt_3.5_Release_Notes#Install_.2F_Upg...
from_Previous_Versions"
target=3D"_blank">http://www.ovirt.org/OVirt_3.5_Rel=
ease_Notes#Install_.2F_Upgrade_from_Previous_Versions</a></p>
</div></blockquote></span></div><br>________________________________________=
_______<br>
Users mailing list<br>
<a href=3D"mailto:Users@ovirt.org">Users@ovirt.org</a><br>
<a href=3D"http://lists.ovirt.org/mailman/listinfo/users"
target=3D"_blank">=
http://lists.ovirt.org/mailman/listinfo/users</a><br>
<br></blockquote></div><br></div>
</div></blockquote></body></html>=
--Apple-Mail-2F141835-03AE-4CF7-85D1-D8D10BEDC9CE--
9:02 a.m.
Il 18/10/2014 20:34, Ryan Nix ha scritto:
"If you are upgrading from a previous version, you should have
the ovirt-release34 package already installed on your system. You can then install
ovirt-release35.rpm as in a clean install side-by-side."
I followed this, but I'm certain what it means.
You're just missing the part:
# yum update "ovirt-engine-setup*"
# engine-setup
Sent from my iPad
On Oct 18, 2014, at 12:04 PM, Gianluca Cecchi <gianluca.cecchi(a)gmail.com
<mailto:gianluca.cecchi@gmail.com>> wrote:
> You didn't follow The upgrade instructions...
>
http://www.ovirt.org/OVirt_3.5_Release_Notes#Install_.2F_Upgrade_from_Pre...
>
--
Sandro Bonazzola
Better technology. Faster innovation. Powered by community collaboration.
See how it works at redhat.com
5:53 p.m.
Congratulations! Hope you could get your party.
Sandro, as I know you always like to hear things like this:
I just upgraded my oVirt 3.4.4 installation to 3.5 and everything went
really well (apart from some package siging / deps; but these are really
not your issues).
Tomorrow I start checking out the new stuff.
Thank you! I really appreciate the work you do.
Daniel
On 17.10.2014 14:46, Sandro Bonazzola wrote:
The oVirt Project is pleased to announce the general availability of
its sixth formal release, oVirt 3.5, as of October 17, 2014.
oVirt is an open source alternative to VMware vSphere, and provides an excellent KVM
management interface for multi-node virtualization. oVirt is
available now for Fedora 19, Fedora 20, Red Hat Enterprise Linux 6.5, and CentOS 6.5 (or
similar) and allow you to use Red Hat Enterprise Linux 7 and
CentOS 7 too as node and for running Hosted Engine.
New features include:
Live Merge
----------
If an image has one or more snapshots, oVirt 3.5's merge command will combine the
data of one volume into another. Live merges can be performed with
data is pulled from one snapshot into another snapshot. The engine can merge multiple
disks at the same time and each merge can independently fail or
succeed in each operation.
Import Storage Domain
This latest release expands oVirt's feature of importing ISOs and exporting storage
domains to expand support for importing an existing data storage
domain. Based on information stored in the storage domain, oVirt can revive entities such
as disks, virtual machines, and templates in the setup of
any data center to which the storage domain is attached.
Advanced Foreman Integration
----------------------------
oVirt 3.5 adds the capability to provision and add hypervisors to oVirt from bare metal.
Foreman is a complete lifecycle management tool for physical
and virtual servers. Through deep integration with configuration management, DHCP, DNS,
TFTP, and PXE-based unattended installations, Foreman manages
every stage of the lifecycle of your physical or virtual servers. Integrating Foreman
with oVirt helps add hypervisor hosts managed by Foreman to the
oVirt engine.
Enhanced Authentication, Authorization and Accounting Support
-------------------------------------------------------------
A new architecture has been built for oVirt 3.5's authentication, authorization and
accounting (AAA) system. The enhancements will provide a clear
separation of authentication from authorization and provide a developer API to develop
custom extensions for authentication and authorization.
New PatternFly Interface
------------------------
oVirt 3.5 will have a new look and feel, using PatternFly, the open interface project.
The new look and feel aims to maintain the colors and spirit
associated with oVirt, while updating it with a new, modern, sleek, and minimal look. The
minimal design allows complex screens to look cleaner and
airier, and lets the user focus on the data and the tasks by removing all extraneous
visual elements.
Advanced Scheduling with Optaplanner
------------------------------------
The Optaplanner is a new service that takes a snapshot of a cluster (a list of hosts and
VMs) and computes an optimized VM-to-Host assignment
solution. Optimization will is done on per Cluster basis. The administrator can use this
information as a hint to tweak the cluster to better utilize
resources.
This release of oVirt also includes numerous bug fixes. See the release notes [1] for a
complete list of the new features and bugs fixed.
A new repository has been created and will be automatically enabled by installing /
upgrading ovirt-release35 package.
See release notes page for further instructions about install / upgrade.
A new oVirt Live iso is also available [2] and a new oVirt Node iso will be available
soon.
[1] http://www.ovirt.org/OVirt_3.5_Release_Notes
[2] http://resources.ovirt.org/pub/ovirt-3.5/iso/ovirt-live-el6-3.5.0.iso
--
Daniel Helgenberger
m box bewegtbild GmbH
P: +49/30/2408781-22
F: +49/30/2408781-10
ACKERSTR. 19
D-10115 BERLIN
www.m-box.de www.monkeymen.tv
Geschäftsführer: Martin Retschitzegger / Michaela Göllner
Handeslregister: Amtsgericht Charlottenburg / HRB 112767
9:48 a.m.
Il 19/10/2014 16:53, Daniel Helgenberger ha scritto:
Congratulations! Hope you could get your party.
Sandro, as I know you always like to hear things like this:
I just upgraded my oVirt 3.4.4 installation to 3.5 and everything went
really well (apart from some package siging / deps; but these are really
not your issues).
I really like when someone report everything goes fine :-)
Tomorrow I start checking out the new stuff.
Thank you! I really appreciate the work you do.
Daniel
On 17.10.2014 14:46, Sandro Bonazzola wrote:
> The oVirt Project is pleased to announce the general availability of its sixth formal
release, oVirt 3.5, as of October 17, 2014.
>
> oVirt is an open source alternative to VMware vSphere, and provides an excellent KVM
management interface for multi-node virtualization. oVirt is
> available now for Fedora 19, Fedora 20, Red Hat Enterprise Linux 6.5, and CentOS 6.5
(or similar) and allow you to use Red Hat Enterprise Linux 7 and
> CentOS 7 too as node and for running Hosted Engine.
>
> New features include:
>
> Live Merge
> ----------
> If an image has one or more snapshots, oVirt 3.5's merge command will combine the
data of one volume into another. Live merges can be performed with
> data is pulled from one snapshot into another snapshot. The engine can merge multiple
disks at the same time and each merge can independently fail or
> succeed in each operation.
> Import Storage Domain
>
> This latest release expands oVirt's feature of importing ISOs and exporting
storage domains to expand support for importing an existing data storage
> domain. Based on information stored in the storage domain, oVirt can revive entities
such as disks, virtual machines, and templates in the setup of
> any data center to which the storage domain is attached.
>
>
> Advanced Foreman Integration
> ----------------------------
> oVirt 3.5 adds the capability to provision and add hypervisors to oVirt from bare
metal. Foreman is a complete lifecycle management tool for physical
> and virtual servers. Through deep integration with configuration management, DHCP,
DNS, TFTP, and PXE-based unattended installations, Foreman manages
> every stage of the lifecycle of your physical or virtual servers. Integrating Foreman
with oVirt helps add hypervisor hosts managed by Foreman to the
> oVirt engine.
>
>
> Enhanced Authentication, Authorization and Accounting Support
> -------------------------------------------------------------
> A new architecture has been built for oVirt 3.5's authentication, authorization
and accounting (AAA) system. The enhancements will provide a clear
> separation of authentication from authorization and provide a developer API to
develop custom extensions for authentication and authorization.
>
>
> New PatternFly Interface
> ------------------------
> oVirt 3.5 will have a new look and feel, using PatternFly, the open interface
project. The new look and feel aims to maintain the colors and spirit
> associated with oVirt, while updating it with a new, modern, sleek, and minimal look.
The minimal design allows complex screens to look cleaner and
> airier, and lets the user focus on the data and the tasks by removing all extraneous
visual elements.
>
>
> Advanced Scheduling with Optaplanner
> ------------------------------------
> The Optaplanner is a new service that takes a snapshot of a cluster (a list of hosts
and VMs) and computes an optimized VM-to-Host assignment
> solution. Optimization will is done on per Cluster basis. The administrator can use
this information as a hint to tweak the cluster to better utilize
> resources.
>
>
>
> This release of oVirt also includes numerous bug fixes. See the release notes [1] for
a complete list of the new features and bugs fixed.
>
> A new repository has been created and will be automatically enabled by installing /
upgrading ovirt-release35 package.
> See release notes page for further instructions about install / upgrade.
>
> A new oVirt Live iso is also available [2] and a new oVirt Node iso will be available
soon.
>
> [1] http://www.ovirt.org/OVirt_3.5_Release_Notes
> [2] http://resources.ovirt.org/pub/ovirt-3.5/iso/ovirt-live-el6-3.5.0.iso
>
--
Sandro Bonazzola
Better technology. Faster innovation. Powered by community collaboration.
See how it works at redhat.com
11:13 a.m.
Hello,
Last week I upgraded to 3.5 and on the engine side everything went
absolutely fine. Now I'm wondering what to do about my hosts (full CentOS 6
installs). Is the upgrade something the engine takes care of when I set the
compatibility version to 3.5? Or should I install the ovirt-release35 rpm
and run yum update on all hosts?
Should I expect impact on running VM's, eg. from restarting vdsm?
On 20 October 2014 08:48, Sandro Bonazzola <sbonazzo(a)redhat.com> wrote:
Il 19/10/2014 16:53, Daniel Helgenberger ha scritto:
> Congratulations! Hope you could get your party.
>
> Sandro, as I know you always like to hear things like this:
> I just upgraded my oVirt 3.4.4 installation to 3.5 and everything went
> really well (apart from some package siging / deps; but these are really
> not your issues).
I really like when someone report everything goes fine :-)
>
> Tomorrow I start checking out the new stuff.
>
> Thank you! I really appreciate the work you do.
>
> Daniel
>
> On 17.10.2014 14:46, Sandro Bonazzola wrote:
>> The oVirt Project is pleased to announce the general availability of
its sixth formal release, oVirt 3.5, as of October 17, 2014.
>>
>> oVirt is an open source alternative to VMware vSphere, and provides an
excellent KVM management interface for multi-node virtualization. oVirt is
>> available now for Fedora 19, Fedora 20, Red Hat Enterprise Linux 6.5,
and CentOS 6.5 (or similar) and allow you to use Red Hat Enterprise Linux 7
and
>> CentOS 7 too as node and for running Hosted Engine.
>>
>> New features include:
>>
>> Live Merge
>> ----------
>> If an image has one or more snapshots, oVirt 3.5's merge command will
combine the data of one volume into another. Live merges can be performed
with
>> data is pulled from one snapshot into another snapshot. The engine can
merge multiple disks at the same time and each merge can independently fail
or
>> succeed in each operation.
>> Import Storage Domain
>>
>> This latest release expands oVirt's feature of importing ISOs and
exporting storage domains to expand support for importing an existing data
storage
>> domain. Based on information stored in the storage domain, oVirt can
revive entities such as disks, virtual machines, and templates in the setup
of
>> any data center to which the storage domain is attached.
>>
>>
>> Advanced Foreman Integration
>> ----------------------------
>> oVirt 3.5 adds the capability to provision and add hypervisors to oVirt
from bare metal. Foreman is a complete lifecycle management tool for
physical
>> and virtual servers. Through deep integration with configuration
management, DHCP, DNS, TFTP, and PXE-based unattended installations,
Foreman manages
>> every stage of the lifecycle of your physical or virtual servers.
Integrating Foreman with oVirt helps add hypervisor hosts managed by
Foreman to the
>> oVirt engine.
>>
>>
>> Enhanced Authentication, Authorization and Accounting Support
>> -------------------------------------------------------------
>> A new architecture has been built for oVirt 3.5's authentication,
authorization and accounting (AAA) system. The enhancements will provide a
clear
>> separation of authentication from authorization and provide a developer
API to develop custom extensions for authentication and authorization.
>>
>>
>> New PatternFly Interface
>> ------------------------
>> oVirt 3.5 will have a new look and feel, using PatternFly, the open
interface project. The new look and feel aims to maintain the colors and
spirit
>> associated with oVirt, while updating it with a new, modern, sleek, and
minimal look. The minimal design allows complex screens to look cleaner and
>> airier, and lets the user focus on the data and the tasks by removing
all extraneous visual elements.
>>
>>
>> Advanced Scheduling with Optaplanner
>> ------------------------------------
>> The Optaplanner is a new service that takes a snapshot of a cluster (a
list of hosts and VMs) and computes an optimized VM-to-Host assignment
>> solution. Optimization will is done on per Cluster basis. The
administrator can use this information as a hint to tweak the cluster to
better utilize
>> resources.
>>
>>
>>
>> This release of oVirt also includes numerous bug fixes. See the release
notes [1] for a complete list of the new features and bugs fixed.
>>
>> A new repository has been created and will be automatically enabled by
installing / upgrading ovirt-release35 package.
>> See release notes page for further instructions about install / upgrade.
>>
>> A new oVirt Live iso is also available [2] and a new oVirt Node iso
will be available soon.
>>
>> [1] http://www.ovirt.org/OVirt_3.5_Release_Notes
>> [2]
http://resources.ovirt.org/pub/ovirt-3.5/iso/ovirt-live-el6-3.5.0.iso
>>
>
--
Sandro Bonazzola
Better technology. Faster innovation. Powered by community collaboration.
See how it works at redhat.com
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
--
Tiemen Ruiten
Systems Engineer
R&D Media
11:45 a.m.
On 20.10.2014 10:13, Tiemen Ruiten wrote:
Hello,
Last week I upgraded to 3.5 and on the engine side everything went absolutely
fine. Now I'm wondering what to do about my hosts (full CentOS 6 installs). Is
the upgrade something the engine takes care of when I set the compatibility
version to 3.5? Or should I install the ovirt-release35 rpm and run yum update
on all hosts?
If you move your hosts to maintenance and then right click ->
'Reinstall' Engine will take care of the upgrade for you. If you are
running hosted engine, you might want to run 'yum update' on the hosts
to update to the latest engine-ha
Should I expect impact on running VM's, eg. from restarting vdsm?
VDSM will be
restarted. But if you do the procedure one by one host, vms
will be migrated away and it should not impact their uptime/availability
(at least for me)
On 20 October 2014 08:48, Sandro Bonazzola <sbonazzo(a)redhat.com
<mailto:sbonazzo@redhat.com>> wrote:
Il 19/10/2014 16:53, Daniel Helgenberger ha scritto:
> Congratulations! Hope you could get your party.
>
> Sandro, as I know you always like to hear things like this:
> I just upgraded my oVirt 3.4.4 installation to 3.5 and everything went
> really well (apart from some package siging / deps; but these are really
> not your issues).
I really like when someone report everything goes fine :-)
>
> Tomorrow I start checking out the new stuff.
>
> Thank you! I really appreciate the work you do.
>
> Daniel
>
> On 17.10.2014 14:46, Sandro Bonazzola wrote:
>> The oVirt Project is pleased to announce the general availability of its
sixth formal release, oVirt 3.5, as of October 17, 2014.
>>
>> oVirt is an open source alternative to VMware vSphere, and provides an
excellent KVM management interface for multi-node virtualization. oVirt is
>> available now for Fedora 19, Fedora 20, Red Hat Enterprise Linux 6.5,
and CentOS 6.5 (or similar) and allow you to use Red Hat Enterprise Linux 7 and
>> CentOS 7 too as node and for running Hosted Engine.
>>
>> New features include:
>>
>> Live Merge
>> ----------
>> If an image has one or more snapshots, oVirt 3.5's merge command will
combine the data of one volume into another. Live merges can be performed with
>> data is pulled from one snapshot into another snapshot. The engine can
merge multiple disks at the same time and each merge can independently fail or
>> succeed in each operation.
>> Import Storage Domain
>>
>> This latest release expands oVirt's feature of importing ISOs and
exporting storage domains to expand support for importing an existing data
storage
>> domain. Based on information stored in the storage domain, oVirt can
revive entities such as disks, virtual machines, and templates in the setup of
>> any data center to which the storage domain is attached.
>>
>>
>> Advanced Foreman Integration
>> ----------------------------
>> oVirt 3.5 adds the capability to provision and add hypervisors to oVirt
from bare metal. Foreman is a complete lifecycle management tool for physical
>> and virtual servers. Through deep integration with configuration
management, DHCP, DNS, TFTP, and PXE-based unattended installations, Foreman
manages
>> every stage of the lifecycle of your physical or virtual servers.
Integrating Foreman with oVirt helps add hypervisor hosts managed by Foreman
to the
>> oVirt engine.
>>
>>
>> Enhanced Authentication, Authorization and Accounting Support
>> -------------------------------------------------------------
>> A new architecture has been built for oVirt 3.5's authentication,
authorization and accounting (AAA) system. The enhancements will provide a clear
>> separation of authentication from authorization and provide a developer
API to develop custom extensions for authentication and authorization.
>>
>>
>> New PatternFly Interface
>> ------------------------
>> oVirt 3.5 will have a new look and feel, using PatternFly, the open
interface project. The new look and feel aims to maintain the colors and spirit
>> associated with oVirt, while updating it with a new, modern, sleek, and
minimal look. The minimal design allows complex screens to look cleaner and
>> airier, and lets the user focus on the data and the tasks by removing
all extraneous visual elements.
>>
>>
>> Advanced Scheduling with Optaplanner
>> ------------------------------------
>> The Optaplanner is a new service that takes a snapshot of a cluster (a
list of hosts and VMs) and computes an optimized VM-to-Host assignment
>> solution. Optimization will is done on per Cluster basis. The
administrator can use this information as a hint to tweak the cluster to
better utilize
>> resources.
>>
>>
>>
>> This release of oVirt also includes numerous bug fixes. See the release
notes [1] for a complete list of the new features and bugs fixed.
>>
>> A new repository has been created and will be automatically enabled by
installing / upgrading ovirt-release35 package.
>> See release notes page for further instructions about install / upgrade.
>>
>> A new oVirt Live iso is also available [2] and a new oVirt Node iso will
be available soon.
>>
>> [1] http://www.ovirt.org/OVirt_3.5_Release_Notes
>> [2] http://resources.ovirt.org/pub/ovirt-3.5/iso/ovirt-live-el6-3.5.0.iso
>>
>
--
Sandro Bonazzola
Better technology. Faster innovation. Powered by community collaboration.
See how it works at redhat.com <http://redhat.com>
_______________________________________________
Users mailing list
Users(a)ovirt.org <mailto:Users@ovirt.org>
http://lists.ovirt.org/mailman/listinfo/users
--
Tiemen Ruiten
Systems Engineer
R&D Media
--
Daniel Helgenberger
m box bewegtbild GmbH
P: +49/30/2408781-22
F: +49/30/2408781-10
ACKERSTR. 19
D-10115 BERLIN
www.m-box.de www.monkeymen.tv
Geschäftsführer: Martin Retschitzegger / Michaela Göllner
Handeslregister: Amtsgericht Charlottenburg / HRB 112767
11:50 a.m.
Il 20/10/2014 10:13, Tiemen Ruiten ha scritto:
Hello,
Last week I upgraded to 3.5 and on the engine side everything went absolutely fine. Now
I'm wondering what to do about my hosts (full CentOS 6
installs). Is the upgrade something the engine takes care of when I set the compatibility
version to 3.5? Or should I install the ovirt-release35 rpm
and run yum update on all hosts?
Should I expect impact on running VM's, eg. from restarting vdsm?
Looks like we have a documentation gap here.
I tried to search the oVirt site for pointing you to a section describing how to upgrade
hosts but did not found one.
I think that we need to finish
http://www.ovirt.org/DraftInstallationGuide
and probably prepare an upgrade guide too.
You'll need to install the ovirt-release35 rpm on your hosts since the engine is not
able to add the new repository (yet? maybe an RFE on this should
be filled for easing the upgrade process of the hosts).
On 20 October 2014 08:48, Sandro Bonazzola <sbonazzo(a)redhat.com
<mailto:sbonazzo@redhat.com>> wrote:
Il 19/10/2014 16:53, Daniel Helgenberger ha scritto:
> Congratulations! Hope you could get your party.
>
> Sandro, as I know you always like to hear things like this:
> I just upgraded my oVirt 3.4.4 installation to 3.5 and everything went
> really well (apart from some package siging / deps; but these are really
> not your issues).
I really like when someone report everything goes fine :-)
>
> Tomorrow I start checking out the new stuff.
>
> Thank you! I really appreciate the work you do.
>
> Daniel
>
> On 17.10.2014 14:46, Sandro Bonazzola wrote:
>> The oVirt Project is pleased to announce the general availability of its
sixth formal release, oVirt 3.5, as of October 17, 2014.
>>
>> oVirt is an open source alternative to VMware vSphere, and provides an
excellent KVM management interface for multi-node virtualization. oVirt is
>> available now for Fedora 19, Fedora 20, Red Hat Enterprise Linux 6.5, and
CentOS 6.5 (or similar) and allow you to use Red Hat Enterprise Linux
7 and
>> CentOS 7 too as node and for running Hosted Engine.
>>
>> New features include:
>>
>> Live Merge
>> ----------
>> If an image has one or more snapshots, oVirt 3.5's merge command will
combine the data of one volume into another. Live merges can be performed
with
>> data is pulled from one snapshot into another snapshot. The engine can merge
multiple disks at the same time and each merge can independently
fail or
>> succeed in each operation.
>> Import Storage Domain
>>
>> This latest release expands oVirt's feature of importing ISOs and
exporting storage domains to expand support for importing an existing data
storage
>> domain. Based on information stored in the storage domain, oVirt can revive
entities such as disks, virtual machines, and templates in the setup of
>> any data center to which the storage domain is attached.
>>
>>
>> Advanced Foreman Integration
>> ----------------------------
>> oVirt 3.5 adds the capability to provision and add hypervisors to oVirt from
bare metal. Foreman is a complete lifecycle management tool for
physical
>> and virtual servers. Through deep integration with configuration management,
DHCP, DNS, TFTP, and PXE-based unattended installations, Foreman
manages
>> every stage of the lifecycle of your physical or virtual servers.
Integrating Foreman with oVirt helps add hypervisor hosts managed by Foreman
to the
>> oVirt engine.
>>
>>
>> Enhanced Authentication, Authorization and Accounting Support
>> -------------------------------------------------------------
>> A new architecture has been built for oVirt 3.5's authentication,
authorization and accounting (AAA) system. The enhancements will provide a clear
>> separation of authentication from authorization and provide a developer API
to develop custom extensions for authentication and authorization.
>>
>>
>> New PatternFly Interface
>> ------------------------
>> oVirt 3.5 will have a new look and feel, using PatternFly, the open
interface project. The new look and feel aims to maintain the colors and spirit
>> associated with oVirt, while updating it with a new, modern, sleek, and
minimal look. The minimal design allows complex screens to look cleaner and
>> airier, and lets the user focus on the data and the tasks by removing all
extraneous visual elements.
>>
>>
>> Advanced Scheduling with Optaplanner
>> ------------------------------------
>> The Optaplanner is a new service that takes a snapshot of a cluster (a list
of hosts and VMs) and computes an optimized VM-to-Host assignment
>> solution. Optimization will is done on per Cluster basis. The administrator
can use this information as a hint to tweak the cluster to better
utilize
>> resources.
>>
>>
>>
>> This release of oVirt also includes numerous bug fixes. See the release
notes [1] for a complete list of the new features and bugs fixed.
>>
>> A new repository has been created and will be automatically enabled by
installing / upgrading ovirt-release35 package.
>> See release notes page for further instructions about install / upgrade.
>>
>> A new oVirt Live iso is also available [2] and a new oVirt Node iso will be
available soon.
>>
>> [1] http://www.ovirt.org/OVirt_3.5_Release_Notes
>> [2] http://resources.ovirt.org/pub/ovirt-3.5/iso/ovirt-live-el6-3.5.0.iso
>>
>
--
Sandro Bonazzola
Better technology. Faster innovation. Powered by community collaboration.
See how it works at redhat.com <http://redhat.com>
_______________________________________________
Users mailing list
Users(a)ovirt.org <mailto:Users@ovirt.org>
http://lists.ovirt.org/mailman/listinfo/users
--
Tiemen Ruiten
Systems Engineer
R&D Media
--
Sandro Bonazzola
Better technology. Faster innovation. Powered by community collaboration.
See how it works at redhat.com
12:44 p.m.
My upgrade went well no problems.
Unfortuneatly I am not able to run any VM on Intel Hosts.
It throws an error: Exit message: internal error internal error NUMA memory
tuning in 'preferred' mode only supports single node.
I cannot edit numa menu it is disabled on the VM.
thanks,
Arman.
On Mon, Oct 20, 2014 at 10:50 AM, Sandro Bonazzola <sbonazzo(a)redhat.com>
wrote:
Il 20/10/2014 10:13, Tiemen Ruiten ha scritto:
> Hello,
>
> Last week I upgraded to 3.5 and on the engine side everything went
absolutely fine. Now I'm wondering what to do about my hosts (full CentOS 6
> installs). Is the upgrade something the engine takes care of when I set
the compatibility version to 3.5? Or should I install the ovirt-release35
rpm
> and run yum update on all hosts?
>
> Should I expect impact on running VM's, eg. from restarting vdsm?
Looks like we have a documentation gap here.
I tried to search the oVirt site for pointing you to a section describing
how to upgrade hosts but did not found one.
I think that we need to finish
http://www.ovirt.org/DraftInstallationGuide
and probably prepare an upgrade guide too.
You'll need to install the ovirt-release35 rpm on your hosts since the
engine is not able to add the new repository (yet? maybe an RFE on this
should
be filled for easing the upgrade process of the hosts).
>
> On 20 October 2014 08:48, Sandro Bonazzola <sbonazzo(a)redhat.com <mailto:
sbonazzo(a)redhat.com>> wrote:
>
> Il 19/10/2014 16:53, Daniel Helgenberger ha scritto:
> > Congratulations! Hope you could get your party.
> >
> > Sandro, as I know you always like to hear things like this:
> > I just upgraded my oVirt 3.4.4 installation to 3.5 and everything
went
> > really well (apart from some package siging / deps; but these are
really
> > not your issues).
>
> I really like when someone report everything goes fine :-)
>
> >
> > Tomorrow I start checking out the new stuff.
> >
> > Thank you! I really appreciate the work you do.
> >
> > Daniel
> >
> > On 17.10.2014 14:46, Sandro Bonazzola wrote:
> >> The oVirt Project is pleased to announce the general availability
of its sixth formal release, oVirt 3.5, as of October 17, 2014.
> >>
> >> oVirt is an open source alternative to VMware vSphere, and
provides an excellent KVM management interface for multi-node
virtualization. oVirt is
> >> available now for Fedora 19, Fedora 20, Red Hat Enterprise Linux
6.5, and CentOS 6.5 (or similar) and allow you to use Red Hat Enterprise
Linux
> 7 and
> >> CentOS 7 too as node and for running Hosted Engine.
> >>
> >> New features include:
> >>
> >> Live Merge
> >> ----------
> >> If an image has one or more snapshots, oVirt 3.5's merge command
will combine the data of one volume into another. Live merges can be
performed
> with
> >> data is pulled from one snapshot into another snapshot. The
engine can merge multiple disks at the same time and each merge can
independently
> fail or
> >> succeed in each operation.
> >> Import Storage Domain
> >>
> >> This latest release expands oVirt's feature of importing ISOs and
exporting storage domains to expand support for importing an existing data
> storage
> >> domain. Based on information stored in the storage domain, oVirt
can revive entities such as disks, virtual machines, and templates in the
setup of
> >> any data center to which the storage domain is attached.
> >>
> >>
> >> Advanced Foreman Integration
> >> ----------------------------
> >> oVirt 3.5 adds the capability to provision and add hypervisors to
oVirt from bare metal. Foreman is a complete lifecycle management tool for
> physical
> >> and virtual servers. Through deep integration with configuration
management, DHCP, DNS, TFTP, and PXE-based unattended installations, Foreman
> manages
> >> every stage of the lifecycle of your physical or virtual servers.
Integrating Foreman with oVirt helps add hypervisor hosts managed by Foreman
> to the
> >> oVirt engine.
> >>
> >>
> >> Enhanced Authentication, Authorization and Accounting Support
> >> -------------------------------------------------------------
> >> A new architecture has been built for oVirt 3.5's authentication,
authorization and accounting (AAA) system. The enhancements will provide a
clear
> >> separation of authentication from authorization and provide a
developer API to develop custom extensions for authentication and
authorization.
> >>
> >>
> >> New PatternFly Interface
> >> ------------------------
> >> oVirt 3.5 will have a new look and feel, using PatternFly, the
open interface project. The new look and feel aims to maintain the colors
and spirit
> >> associated with oVirt, while updating it with a new, modern,
sleek, and minimal look. The minimal design allows complex screens to look
cleaner and
> >> airier, and lets the user focus on the data and the tasks by
removing all extraneous visual elements.
> >>
> >>
> >> Advanced Scheduling with Optaplanner
> >> ------------------------------------
> >> The Optaplanner is a new service that takes a snapshot of a
cluster (a list of hosts and VMs) and computes an optimized VM-to-Host
assignment
> >> solution. Optimization will is done on per Cluster basis. The
administrator can use this information as a hint to tweak the cluster to
better
> utilize
> >> resources.
> >>
> >>
> >>
> >> This release of oVirt also includes numerous bug fixes. See the
release notes [1] for a complete list of the new features and bugs fixed.
> >>
> >> A new repository has been created and will be automatically
enabled by installing / upgrading ovirt-release35 package.
> >> See release notes page for further instructions about install /
upgrade.
> >>
> >> A new oVirt Live iso is also available [2] and a new oVirt Node
iso will be available soon.
> >>
> >> [1] http://www.ovirt.org/OVirt_3.5_Release_Notes
> >> [2]
http://resources.ovirt.org/pub/ovirt-3.5/iso/ovirt-live-el6-3.5.0.iso
> >>
> >
>
>
> --
> Sandro Bonazzola
> Better technology. Faster innovation. Powered by community
collaboration.
> See how it works at redhat.com <http://redhat.com>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org <mailto:Users@ovirt.org>
> http://lists.ovirt.org/mailman/listinfo/users
>
>
>
>
> --
> Tiemen Ruiten
> Systems Engineer
> R&D Media
--
Sandro Bonazzola
Better technology. Faster innovation. Powered by community collaboration.
See how it works at redhat.com
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
12:56 p.m.
My bad!!
False Alarm.everything is working after some massaging:)
1) start VM get error: error NUMA memory tuning in 'preferred' mode only
supports single node
2) stop VM edit properties:
2.a)- edit->host->Start Running on->specific host
2.b)- edit->host->Migration options->do not allow migration
2.c)- edit->host->ConfigureNuma->tune mode->interleave
Run VM and enjoy.
done!
On Mon, Oct 20, 2014 at 11:44 AM, Arman Khalatyan <arm2arm(a)gmail.com> wrote:
My upgrade went well no problems.
Unfortuneatly I am not able to run any VM on Intel Hosts.
It throws an error: Exit message: internal error internal error NUMA
memory tuning in 'preferred' mode only supports single node.
I cannot edit numa menu it is disabled on the VM.
thanks,
Arman.
On Mon, Oct 20, 2014 at 10:50 AM, Sandro Bonazzola <sbonazzo(a)redhat.com>
wrote:
> Il 20/10/2014 10:13, Tiemen Ruiten ha scritto:
> > Hello,
> >
> > Last week I upgraded to 3.5 and on the engine side everything went
> absolutely fine. Now I'm wondering what to do about my hosts (full CentOS 6
> > installs). Is the upgrade something the engine takes care of when I set
> the compatibility version to 3.5? Or should I install the ovirt-release35
> rpm
> > and run yum update on all hosts?
> >
> > Should I expect impact on running VM's, eg. from restarting vdsm?
>
>
> Looks like we have a documentation gap here.
> I tried to search the oVirt site for pointing you to a section describing
> how to upgrade hosts but did not found one.
>
> I think that we need to finish
> http://www.ovirt.org/DraftInstallationGuide
> and probably prepare an upgrade guide too.
>
> You'll need to install the ovirt-release35 rpm on your hosts since the
> engine is not able to add the new repository (yet? maybe an RFE on this
> should
> be filled for easing the upgrade process of the hosts).
>
> >
> > On 20 October 2014 08:48, Sandro Bonazzola <sbonazzo(a)redhat.com
> <mailto:sbonazzo@redhat.com>> wrote:
> >
> > Il 19/10/2014 16:53, Daniel Helgenberger ha scritto:
> > > Congratulations! Hope you could get your party.
> > >
> > > Sandro, as I know you always like to hear things like this:
> > > I just upgraded my oVirt 3.4.4 installation to 3.5 and everything
> went
> > > really well (apart from some package siging / deps; but these are
> really
> > > not your issues).
> >
> > I really like when someone report everything goes fine :-)
> >
> > >
> > > Tomorrow I start checking out the new stuff.
> > >
> > > Thank you! I really appreciate the work you do.
> > >
> > > Daniel
> > >
> > > On 17.10.2014 14:46, Sandro Bonazzola wrote:
> > >> The oVirt Project is pleased to announce the general
> availability of its sixth formal release, oVirt 3.5, as of October 17, 2014.
> > >>
> > >> oVirt is an open source alternative to VMware vSphere, and
> provides an excellent KVM management interface for multi-node
> virtualization. oVirt is
> > >> available now for Fedora 19, Fedora 20, Red Hat Enterprise Linux
> 6.5, and CentOS 6.5 (or similar) and allow you to use Red Hat Enterprise
> Linux
> > 7 and
> > >> CentOS 7 too as node and for running Hosted Engine.
> > >>
> > >> New features include:
> > >>
> > >> Live Merge
> > >> ----------
> > >> If an image has one or more snapshots, oVirt 3.5's merge
command
> will combine the data of one volume into another. Live merges can be
> performed
> > with
> > >> data is pulled from one snapshot into another snapshot. The
> engine can merge multiple disks at the same time and each merge can
> independently
> > fail or
> > >> succeed in each operation.
> > >> Import Storage Domain
> > >>
> > >> This latest release expands oVirt's feature of importing ISOs
> and exporting storage domains to expand support for importing an existing
> data
> > storage
> > >> domain. Based on information stored in the storage domain, oVirt
> can revive entities such as disks, virtual machines, and templates in the
> setup of
> > >> any data center to which the storage domain is attached.
> > >>
> > >>
> > >> Advanced Foreman Integration
> > >> ----------------------------
> > >> oVirt 3.5 adds the capability to provision and add hypervisors
> to oVirt from bare metal. Foreman is a complete lifecycle management tool
> for
> > physical
> > >> and virtual servers. Through deep integration with configuration
> management, DHCP, DNS, TFTP, and PXE-based unattended installations, Foreman
> > manages
> > >> every stage of the lifecycle of your physical or virtual
> servers. Integrating Foreman with oVirt helps add hypervisor hosts managed
> by Foreman
> > to the
> > >> oVirt engine.
> > >>
> > >>
> > >> Enhanced Authentication, Authorization and Accounting Support
> > >> -------------------------------------------------------------
> > >> A new architecture has been built for oVirt 3.5's
> authentication, authorization and accounting (AAA) system. The enhancements
> will provide a clear
> > >> separation of authentication from authorization and provide a
> developer API to develop custom extensions for authentication and
> authorization.
> > >>
> > >>
> > >> New PatternFly Interface
> > >> ------------------------
> > >> oVirt 3.5 will have a new look and feel, using PatternFly, the
> open interface project. The new look and feel aims to maintain the colors
> and spirit
> > >> associated with oVirt, while updating it with a new, modern,
> sleek, and minimal look. The minimal design allows complex screens to look
> cleaner and
> > >> airier, and lets the user focus on the data and the tasks by
> removing all extraneous visual elements.
> > >>
> > >>
> > >> Advanced Scheduling with Optaplanner
> > >> ------------------------------------
> > >> The Optaplanner is a new service that takes a snapshot of a
> cluster (a list of hosts and VMs) and computes an optimized VM-to-Host
> assignment
> > >> solution. Optimization will is done on per Cluster basis. The
> administrator can use this information as a hint to tweak the cluster to
> better
> > utilize
> > >> resources.
> > >>
> > >>
> > >>
> > >> This release of oVirt also includes numerous bug fixes. See the
> release notes [1] for a complete list of the new features and bugs fixed.
> > >>
> > >> A new repository has been created and will be automatically
> enabled by installing / upgrading ovirt-release35 package.
> > >> See release notes page for further instructions about install /
> upgrade.
> > >>
> > >> A new oVirt Live iso is also available [2] and a new oVirt Node
> iso will be available soon.
> > >>
> > >> [1] http://www.ovirt.org/OVirt_3.5_Release_Notes
> > >> [2]
> http://resources.ovirt.org/pub/ovirt-3.5/iso/ovirt-live-el6-3.5.0.iso
> > >>
> > >
> >
> >
> > --
> > Sandro Bonazzola
> > Better technology. Faster innovation. Powered by community
> collaboration.
> > See how it works at redhat.com <http://redhat.com>
> > _______________________________________________
> > Users mailing list
> > Users(a)ovirt.org <mailto:Users@ovirt.org>
> > http://lists.ovirt.org/mailman/listinfo/users
> >
> >
> >
> >
> > --
> > Tiemen Ruiten
> > Systems Engineer
> > R&D Media
>
>
> --
> Sandro Bonazzola
> Better technology. Faster innovation. Powered by community collaboration.
> See how it works at redhat.com
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
1:46 p.m.
On 20.10.2014 10:50, Sandro Bonazzola wrote:
Il 20/10/2014 10:13, Tiemen Ruiten ha scritto:
> Hello,
>
> Last week I upgraded to 3.5 and on the engine side everything went absolutely fine.
Now I'm wondering what to do about my hosts (full CentOS 6
> installs). Is the upgrade something the engine takes care of when I set the
compatibility version to 3.5? Or should I install the ovirt-release35 rpm
> and run yum update on all hosts?
>
> Should I expect impact on running VM's, eg. from restarting vdsm?
Looks like we have a documentation gap here.
I tried to search the oVirt site for pointing you to a section describing how to upgrade
hosts but did not found one.
I think that we need to finish
http://www.ovirt.org/DraftInstallationGuide
and probably prepare an upgrade guide too.
You'll need to install the ovirt-release35 rpm on your hosts since the engine is not
able to add the new repository (yet? maybe an RFE on this should
be filled for easing the upgrade process of the hosts).
A very good idea. I took
the liberty filing this RFE [1]
[1] https://bugzilla.redhat.com/show_bug.cgi?id=1154620
> On 20 October 2014 08:48, Sandro Bonazzola <sbonazzo(a)redhat.com
<mailto:sbonazzo@redhat.com>> wrote:
>
> Il 19/10/2014 16:53, Daniel Helgenberger ha scritto:
> > Congratulations! Hope you could get your party.
> >
> > Sandro, as I know you always like to hear things like this:
> > I just upgraded my oVirt 3.4.4 installation to 3.5 and everything went
> > really well (apart from some package siging / deps; but these are really
> > not your issues).
>
> I really like when someone report everything goes fine :-)
>
> >
> > Tomorrow I start checking out the new stuff.
> >
> > Thank you! I really appreciate the work you do.
> >
> > Daniel
> >
> > On 17.10.2014 14:46, Sandro Bonazzola wrote:
> >> The oVirt Project is pleased to announce the general availability of its
sixth formal release, oVirt 3.5, as of October 17, 2014.
> >>
> >> oVirt is an open source alternative to VMware vSphere, and provides an
excellent KVM management interface for multi-node virtualization. oVirt is
> >> available now for Fedora 19, Fedora 20, Red Hat Enterprise Linux 6.5,
and CentOS 6.5 (or similar) and allow you to use Red Hat Enterprise Linux
> 7 and
> >> CentOS 7 too as node and for running Hosted Engine.
> >>
> >> New features include:
> >>
> >> Live Merge
> >> ----------
> >> If an image has one or more snapshots, oVirt 3.5's merge command
will combine the data of one volume into another. Live merges can be performed
> with
> >> data is pulled from one snapshot into another snapshot. The engine can
merge multiple disks at the same time and each merge can independently
> fail or
> >> succeed in each operation.
> >> Import Storage Domain
> >>
> >> This latest release expands oVirt's feature of importing ISOs and
exporting storage domains to expand support for importing an existing data
> storage
> >> domain. Based on information stored in the storage domain, oVirt can
revive entities such as disks, virtual machines, and templates in the setup of
> >> any data center to which the storage domain is attached.
> >>
> >>
> >> Advanced Foreman Integration
> >> ----------------------------
> >> oVirt 3.5 adds the capability to provision and add hypervisors to oVirt
from bare metal. Foreman is a complete lifecycle management tool for
> physical
> >> and virtual servers. Through deep integration with configuration
management, DHCP, DNS, TFTP, and PXE-based unattended installations, Foreman
> manages
> >> every stage of the lifecycle of your physical or virtual servers.
Integrating Foreman with oVirt helps add hypervisor hosts managed by Foreman
> to the
> >> oVirt engine.
> >>
> >>
> >> Enhanced Authentication, Authorization and Accounting Support
> >> -------------------------------------------------------------
> >> A new architecture has been built for oVirt 3.5's authentication,
authorization and accounting (AAA) system. The enhancements will provide a clear
> >> separation of authentication from authorization and provide a developer
API to develop custom extensions for authentication and authorization.
> >>
> >>
> >> New PatternFly Interface
> >> ------------------------
> >> oVirt 3.5 will have a new look and feel, using PatternFly, the open
interface project. The new look and feel aims to maintain the colors and spirit
> >> associated with oVirt, while updating it with a new, modern, sleek, and
minimal look. The minimal design allows complex screens to look cleaner and
> >> airier, and lets the user focus on the data and the tasks by removing
all extraneous visual elements.
> >>
> >>
> >> Advanced Scheduling with Optaplanner
> >> ------------------------------------
> >> The Optaplanner is a new service that takes a snapshot of a cluster (a
list of hosts and VMs) and computes an optimized VM-to-Host assignment
> >> solution. Optimization will is done on per Cluster basis. The
administrator can use this information as a hint to tweak the cluster to better
> utilize
> >> resources.
> >>
> >>
> >>
> >> This release of oVirt also includes numerous bug fixes. See the release
notes [1] for a complete list of the new features and bugs fixed.
> >>
> >> A new repository has been created and will be automatically enabled by
installing / upgrading ovirt-release35 package.
> >> See release notes page for further instructions about install /
upgrade.
> >>
> >> A new oVirt Live iso is also available [2] and a new oVirt Node iso will
be available soon.
> >>
> >> [1] http://www.ovirt.org/OVirt_3.5_Release_Notes
> >> [2]
http://resources.ovirt.org/pub/ovirt-3.5/iso/ovirt-live-el6-3.5.0.iso
> >>
> >
>
>
> --
> Sandro Bonazzola
> Better technology. Faster innovation. Powered by community collaboration.
> See how it works at redhat.com <http://redhat.com>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org <mailto:Users@ovirt.org>
> http://lists.ovirt.org/mailman/listinfo/users
>
>
>
>
> --
> Tiemen Ruiten
> Systems Engineer
> R&D Media
--
Daniel Helgenberger
m box bewegtbild GmbH
P: +49/30/2408781-22
F: +49/30/2408781-10
ACKERSTR. 19
D-10115 BERLIN
www.m-box.de www.monkeymen.tv
Geschäftsführer: Martin Retschitzegger / Michaela Göllner
Handeslregister: Amtsgericht Charlottenburg / HRB 112767
3686
days inactive
3689
days old
15 comments
8 participants
participants (8)
-
Arman Khalatyan -
Daniel Helgenberger -
Gianluca Cecchi -
Itamar Heim -
Mohyedeen Nazzal -
Ryan Nix -
Sandro Bonazzola -
Tiemen Ruiten