3:18 p.m.
Seems the Gluster Node that booted from 4.5 into emergency mode was due to not finding the
mounts for gluster_bricks data and engine, its as if it cant see them any more.
Once i removed the mounts from /etc/fstab it lets me in, I could boot up to the node past
emergency mode but odd issue.
One of the errors:
dependency failed for /gluster_bricks/data
Subject: Unit gluster_bricks-data.mount has failed
This is node 3 of the Gluster, Arbiter.
[root@ovirt-3 ~]# mount -a
mount: /gluster_bricks/engine: can't find UUID=45349e37-7a97-4a64-81eb-5fac3fec6477.
mount: /gluster_bricks/data: can't find UUID=c0fa1111-0db2-4e08-bb79-be677530aeaa.
12:35 a.m.
On Wed, Apr 27, 2022 at 8:27 AM Abe E <aellahib(a)gmail.com> wrote:
Seems the Gluster Node that booted from 4.5 into emergency mode was due to not finding
the mounts for gluster_bricks data and engine, its as if it cant see them any more.
Once i removed the mounts from /etc/fstab it lets me in, I could boot up to the node past
emergency mode but odd issue.
One of the errors:
dependency failed for /gluster_bricks/data
Subject: Unit gluster_bricks-data.mount has failed
This is node 3 of the Gluster, Arbiter.
[root@ovirt-3 ~]# mount -a
mount: /gluster_bricks/engine: can't find UUID=45349e37-7a97-4a64-81eb-5fac3fec6477.
mount: /gluster_bricks/data: can't find UUID=c0fa1111-0db2-4e08-bb79-be677530aeaa.
IIUC this is because the gluster packages were not
available/installable/whatever at release time, thus not included in
ovirt-node. There are other threads about this issue on the list,
please check them for details. Thanks.
(And also: Please set some subject line for your email next time, to
make it easier for those you send to, and also for yourself, to know
what it's about and find it later).
Best regards,
--
Didi
1:43 a.m.
I ran the following: dnf -q list installed centos-release\* ovirt-release\* ovirt-engine
and it shows I do have gluster10 which comes with 4.5.
I have checked other threads already but didnt find anything that matched my issue. Can
you link what you're referring to?
SDA4 is where the Data and Engine glusters are, although If I try to make a new
volumegroup for the gluster, I get this serror
If I try try to make a new vgroup I get the following error, it almost sounds as if the
partition is corrupted or something, basically i was trying to get it a new UUID.
Physical volume '/dev/sda4' is already in volume group
'gluster_vg_sda4'
Unable to add physical volume '/dev/sda4' to volume group
'gluster_vg_sda4'
/dev/sda4: physical volume not initialized.
[root@ovirt-3 ~]# dnf -q list installed centos-release\* ovirt-release\* ovirt-engine
Installed Packages
centos-release-advanced-virtualization.noarch
1.0-4.el8
@@commandline
centos-release-ceph-pacific.noarch
1.0-2.el8
@System
centos-release-gluster10.noarch
1.0-1.el8s
@System
centos-release-messaging.noarch
1-3.el8
@@commandline
centos-release-nfv-common.noarch
1-3.el8
@System
centos-release-nfv-openvswitch.noarch
1-3.el8
@System
centos-release-openstack-xena.noarch
1-1.el8
@@commandline
centos-release-opstools.noarch
1-12.el8
@System
centos-release-ovirt45.noarch
8.6-1.el8
@@commandline
centos-release-rabbitmq-38.noarch
1-3.el8
@@commandline
centos-release-storage-common.noarch
2-2.el8
@System
centos-release-virt-common.noarch
1-2.el8
@System
ovirt-release-host-node.x86_64
4.5.0.1-1.el8
@System
2:06 a.m.
On Wed, Apr 27, 2022 at 9:55 AM Abe E <aellahib(a)gmail.com> wrote:
I ran the following: dnf -q list installed centos-release\* ovirt-release\* ovirt-engine
and it shows I do have gluster10 which comes with 4.5.
I have checked other threads already but didnt find anything that matched my issue. Can
you link what you're referring to?
Nothing special, just what you already did.
SDA4 is where the Data and Engine glusters are, although If I try to
make a new volumegroup for the gluster, I get this serror
If I try try to make a new vgroup I get the following error, it almost sounds as if the
partition is corrupted or something, basically i was trying to get it a new UUID.
Physical volume '/dev/sda4' is already in volume group
'gluster_vg_sda4'
Unable to add physical volume '/dev/sda4' to volume group
'gluster_vg_sda4'
/dev/sda4: physical volume not initialized.
Sorry, no idea. I suggest to start a new thread with a better subject,
that will help people that might know the answer what it's about.
Thanks.
[root@ovirt-3 ~]# dnf -q list installed centos-release\* ovirt-release\* ovirt-engine
Installed Packages
centos-release-advanced-virtualization.noarch
1.0-4.el8
@@commandline
centos-release-ceph-pacific.noarch
1.0-2.el8
@System
centos-release-gluster10.noarch
1.0-1.el8s
@System
centos-release-messaging.noarch
1-3.el8
@@commandline
centos-release-nfv-common.noarch
1-3.el8
@System
centos-release-nfv-openvswitch.noarch
1-3.el8
@System
centos-release-openstack-xena.noarch
1-1.el8
@@commandline
centos-release-opstools.noarch
1-12.el8
@System
centos-release-ovirt45.noarch
8.6-1.el8
@@commandline
centos-release-rabbitmq-38.noarch
1-3.el8
@@commandline
centos-release-storage-common.noarch
2-2.el8
@System
centos-release-virt-common.noarch
1-2.el8
@System
ovirt-release-host-node.x86_64
4.5.0.1-1.el8
@System
On the new thread, perhaps also list 'rpm -qa | grep gluster'.
Best regards,
--
Didi
970
days inactive
971
days old
4 comments
2 participants
participants (2)
-
Abe E -
Yedidyah Bar David