3:50 a.m.
Hello,
on F18 physical host configured all-in-one oVirt nightly
(
ovirt-engine-3.2.0-1.20130101.git2184580.fc18.noarch
)
Trying to setup a w7 vm in run once, I get
Error
win7tst:
- Cannot run VM. There are no available running Hosts in the Host
Cluster.
Here are screenshots for:
vm network
https://docs.google.com/open?id=0BwoPbcrMv8mvQWpwMUh6ZGRVeGc
host network, after setting it up with drag of ovirtmgmt to em3
(the host currently has only em3.65 configured)
https://docs.google.com/open?id=0BwoPbcrMv8mvRkVLSlkxWnRwakE
engine log gzipped:
https://docs.google.com/open?id=0BwoPbcrMv8mvcXRERkEyQW5Yc1U
Is there an evident error in my config or should I send any other log?
screenshots for local_cluster and local_host situation
https://docs.google.com/open?id=0BwoPbcrMv8mvNV8zWTJLWHFhdFU
and
https://docs.google.com/open?id=0BwoPbcrMv8mvejlGUW5UWkxKMDg
Thanks,
Gianluca
4:04 a.m.
Current siuation if I select host and click on "setup host networks" for it:
https://docs.google.com/open?id=0BwoPbcrMv8mvMjFONTd2UEdXWWM
4:07 a.m.
Current network config on host:
# ip addr list
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: em1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen
1000
link/ether 00:1e:0b:21:b8:c4 brd ff:ff:ff:ff:ff:ff
inet6 fe80::21e:bff:fe21:b8c4/64 scope link
valid_lft forever preferred_lft forever
3: em2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen
1000
link/ether 00:1e:0b:21:b8:c6 brd ff:ff:ff:ff:ff:ff
inet6 fe80::21e:bff:fe21:b8c6/64 scope link
valid_lft forever preferred_lft forever
4: em3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master
ovirtmgmt state UP qlen 1000
link/ether 00:1c:c4:ab:3a:dd brd ff:ff:ff:ff:ff:ff
5: em4: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen
1000
link/ether 00:1c:c4:ab:3a:de brd ff:ff:ff:ff:ff:ff
inet6 fe80::21c:c4ff:feab:3ade/64 scope link
valid_lft forever preferred_lft forever
6: em3.65@em3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
state UP
link/ether 00:1c:c4:ab:3a:dd brd ff:ff:ff:ff:ff:ff
inet 10.4.4.59/24 brd 10.4.4.255 scope global em3.65
inet6 fe80::21c:c4ff:feab:3add/64 scope link
valid_lft forever preferred_lft forever
11: ;vdsmdummy;: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
link/ether 96:14:65:da:bc:c5 brd ff:ff:ff:ff:ff:ff
12: bond0: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state DOWN
link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
13: bond4: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state DOWN
link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
14: bond1: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state DOWN
link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
15: ovirtmgmt: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
state UP
link/ether 00:1c:c4:ab:3a:dd brd ff:ff:ff:ff:ff:ff
inet6 fe80::21c:c4ff:feab:3add/64 scope link
valid_lft forever preferred_lft forever
# brctl show
bridge name bridge id STP enabled interfaces
;vdsmdummy; 8000.000000000000 no
ovirtmgmt 8000.001cc4ab3add no em3
Do I have perhaps to say/config that ovirtmgmt is tagged in any way?
1:27 p.m.
Hi Gianluca,
From looking in the logs it looks like you had some DB upgrade issue,
or
DB clean install issue.
"Caused by: org.postgresql.util.PSQLException: The column name
count_threads_as_cores was not found in this ResultSet"
Adding Doron to take take a look, and I think Einav also had some db
upgrade issue last week...
After fixing you DB issues, can you tell me if you have host in status
up, I don't see any network related issue in the logs.
Livnat
On 01/05/2013 03:07 AM, Gianluca Cecchi wrote:
Current network config on host:
# ip addr list
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 <http://127.0.0.1/8> scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: em1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP
qlen 1000
link/ether 00:1e:0b:21:b8:c4 brd ff:ff:ff:ff:ff:ff
inet6 fe80::21e:bff:fe21:b8c4/64 scope link
valid_lft forever preferred_lft forever
3: em2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP
qlen 1000
link/ether 00:1e:0b:21:b8:c6 brd ff:ff:ff:ff:ff:ff
inet6 fe80::21e:bff:fe21:b8c6/64 scope link
valid_lft forever preferred_lft forever
4: em3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master
ovirtmgmt state UP qlen 1000
link/ether 00:1c:c4:ab:3a:dd brd ff:ff:ff:ff:ff:ff
5: em4: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP
qlen 1000
link/ether 00:1c:c4:ab:3a:de brd ff:ff:ff:ff:ff:ff
inet6 fe80::21c:c4ff:feab:3ade/64 scope link
valid_lft forever preferred_lft forever
6: em3.65@em3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
state UP
link/ether 00:1c:c4:ab:3a:dd brd ff:ff:ff:ff:ff:ff
inet 10.4.4.59/24 <http://10.4.4.59/24> brd 10.4.4.255 scope global
em3.65
inet6 fe80::21c:c4ff:feab:3add/64 scope link
valid_lft forever preferred_lft forever
11: ;vdsmdummy;: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
link/ether 96:14:65:da:bc:c5 brd ff:ff:ff:ff:ff:ff
12: bond0: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state DOWN
link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
13: bond4: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state DOWN
link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
14: bond1: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state DOWN
link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
15: ovirtmgmt: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
state UP
link/ether 00:1c:c4:ab:3a:dd brd ff:ff:ff:ff:ff:ff
inet6 fe80::21c:c4ff:feab:3add/64 scope link
valid_lft forever preferred_lft forever
# brctl show
bridge namebridge idSTP enabledinterfaces
;vdsmdummy;8000.000000000000no
ovirtmgmt8000.001cc4ab3addnoem3
Do I have perhaps to say/config that ovirtmgmt is tagged in any way?
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
2:37 p.m.
Gianluca,
I do not see all the details, but based on Livnat's mail, it seems
that you DB needs an upgrade, and it will pick up this addition-
backend/manager/dbscripts/upgrade/03_02_0100_add_cpu_thread_columns.sql:select
fn_db_add_column('vds_groups', 'count_threads_as_cores', 'BOOLEAN NOT
NULL DEFAULT FALSE');
Is your setup based on RPMs or built from source?
----- Original Message -----
From: "Livnat Peer" <lpeer(a)redhat.com>
To: "Gianluca Cecchi" <gianluca.cecchi(a)gmail.com>
Cc: "users" <users(a)ovirt.org>, "Doron Fediuck"
<dfediuck(a)redhat.com>, "Einav Cohen" <ecohen(a)redhat.com>
Sent: Sunday, January 13, 2013 12:27:57 PM
Subject: Re: [Users] win 7 vm creation:
Hi Gianluca,
From looking in the logs it looks like you had some DB upgrade issue,
or
DB clean install issue.
"Caused by: org.postgresql.util.PSQLException: The column name
count_threads_as_cores was not found in this ResultSet"
Adding Doron to take take a look, and I think Einav also had some db
upgrade issue last week...
After fixing you DB issues, can you tell me if you have host in
status
up, I don't see any network related issue in the logs.
Livnat
On 01/05/2013 03:07 AM, Gianluca Cecchi wrote:
> Current network config on host:
>
> # ip addr list
> 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
> link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
> inet 127.0.0.1/8 <http://127.0.0.1/8> scope host lo
> inet6 ::1/128 scope host
> valid_lft forever preferred_lft forever
> 2: em1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state
> UP
> qlen 1000
> link/ether 00:1e:0b:21:b8:c4 brd ff:ff:ff:ff:ff:ff
> inet6 fe80::21e:bff:fe21:b8c4/64 scope link
> valid_lft forever preferred_lft forever
> 3: em2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state
> UP
> qlen 1000
> link/ether 00:1e:0b:21:b8:c6 brd ff:ff:ff:ff:ff:ff
> inet6 fe80::21e:bff:fe21:b8c6/64 scope link
> valid_lft forever preferred_lft forever
> 4: em3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master
> ovirtmgmt state UP qlen 1000
> link/ether 00:1c:c4:ab:3a:dd brd ff:ff:ff:ff:ff:ff
> 5: em4: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state
> UP
> qlen 1000
> link/ether 00:1c:c4:ab:3a:de brd ff:ff:ff:ff:ff:ff
> inet6 fe80::21c:c4ff:feab:3ade/64 scope link
> valid_lft forever preferred_lft forever
> 6: em3.65@em3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
> noqueue
> state UP
> link/ether 00:1c:c4:ab:3a:dd brd ff:ff:ff:ff:ff:ff
> inet 10.4.4.59/24 <http://10.4.4.59/24> brd 10.4.4.255 scope
> global
> em3.65
> inet6 fe80::21c:c4ff:feab:3add/64 scope link
> valid_lft forever preferred_lft forever
> 11: ;vdsmdummy;: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state
> DOWN
> link/ether 96:14:65:da:bc:c5 brd ff:ff:ff:ff:ff:ff
> 12: bond0: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state
> DOWN
> link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
> 13: bond4: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state
> DOWN
> link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
> 14: bond1: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state
> DOWN
> link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
> 15: ovirtmgmt: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
> noqueue
> state UP
> link/ether 00:1c:c4:ab:3a:dd brd ff:ff:ff:ff:ff:ff
> inet6 fe80::21c:c4ff:feab:3add/64 scope link
> valid_lft forever preferred_lft forever
>
> # brctl show
> bridge namebridge idSTP enabledinterfaces
> ;vdsmdummy;8000.000000000000no
> ovirtmgmt8000.001cc4ab3addnoem3
>
> Do I have perhaps to say/config that ovirtmgmt is tagged in any
> way?
>
>
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
2:48 p.m.
On Sun, Jan 13, 2013 at 12:37 PM, Doron Fediuck wrote:
Is your setup based on RPMs or built from source?
when I had the problem it was based on ovirt-nightly for Fedora 18 based on
3.2.0-1.20130101.git2184580
SO I don't know at that time what were the contents of the file indicated...
3:04 p.m.
------=_Part_3938548_1901943431.1358078680670
Content-Type: text/plain; charset=utf-8
Content-Transfer-Encoding: 7bit
----- Original Message -----
From: "Gianluca Cecchi" <gianluca.cecchi(a)gmail.com>
To: "Doron Fediuck" <dfediuck(a)redhat.com>
Cc: "Livnat Peer" <lpeer(a)redhat.com>, "users"
<users(a)ovirt.org>,
"Einav Cohen" <ecohen(a)redhat.com>
Sent: Sunday, January 13, 2013 1:48:21 PM
Subject: Re: [Users] win 7 vm creation:
On Sun, Jan 13, 2013 at 12:37 PM, Doron Fediuck wrote:
> Is your setup based on RPMs or built from source?
when I had the problem it was based on ovirt-nightly for Fedora 18
based on
3.2.0-1.20130101.git2184580
SO I don't know at that time what were the contents of the file
indicated...
Do you still have it?
------=_Part_3938548_1901943431.1358078680670
Content-Type: text/html; charset=utf-8
Content-Transfer-Encoding: quoted-printable
<html><head><style type=3D'text/css'>p { margin: 0;
}</style></head><body><=
div style=3D'font-family: times new roman,new york,times,serif; font-size: =
12pt; color: #000000'><br><hr id=3D"zwchr"><blockquote
style=3D"border-left=
:2px solid rgb(16, 16, 255);margin-left:5px;padding-left:5px;color:#000;fon=
t-weight:normal;font-style:normal;text-decoration:none;font-family:Helvetic=
a,Arial,sans-serif;font-size:12pt;"><b>From: </b>"Gianluca
Cecchi" <gian=
luca.cecchi(a)gmail.com&gt;<br><b>To: </b>"Doron Fediuck"
<dfediuck@redhat=
.com><br><b>Cc: </b>"Livnat Peer"
&lt;lpeer(a)redhat.com&gt;, "users" <=
users(a)ovirt.org&gt;, "Einav Cohen"
&lt;ecohen(a)redhat.com&gt;<br><b>Sent: </=
b>Sunday, January 13, 2013 1:48:21 PM<br><b>Subject: </b>Re: [Users]
win 7 =
vm creation:<br><br><div dir=3D"ltr"><div
class=3D"gmail_extra"><br><div cl=
ass=3D"gmail_quote">On Sun, Jan 13, 2013 at 12:37 PM, Doron Fediuck
wrote:<=
br><blockquote class=3D"gmail_quote" style=3D"margin:0px 0px 0px
0.8ex;bord=
er-left:1px solid rgb(204,204,204);padding-left:1ex">
<br>
Is your setup based on RPMs or built from
source?</blockquote></div><br><di=
v>when I had the problem it was based on ovirt-nightly for Fedora 18 based =
on <br>3.2.0-1.20130101.git2184580<br></div>SO I don't know at that
time wh=
at were the contents of the file indicated...<br>
</div></div>
</blockquote>Do you still have it?<br></div></body></html>
------=_Part_3938548_1901943431.1358078680670--
3:32 p.m.
----- Original Message -----
From: "Livnat Peer" <lpeer(a)redhat.com>
To: "Gianluca Cecchi" <gianluca.cecchi(a)gmail.com>
Cc: "users" <users(a)ovirt.org>
Sent: Sunday, January 13, 2013 12:27:57 PM
Subject: Re: [Users] win 7 vm creation:
Hi Gianluca,
From looking in the logs it looks like you had some DB upgrade issue,
or
DB clean install issue.
"Caused by: org.postgresql.util.PSQLException: The column name
count_threads_as_cores was not found in this ResultSet"
Adding Doron to take take a look, and I think Einav also had some db
upgrade issue last week...
Yes, she had, there was a bug on upgrade for pg 9.x (f18 defaulted to that)
Anyway, this was merged already upstream
http://gerrit.ovirt.org/#/c/10778/
You can fix and rerun the upgrade again
After fixing you DB issues, can you tell me if you have host in
status
up, I don't see any network related issue in the logs.
Livnat
On 01/05/2013 03:07 AM, Gianluca Cecchi wrote:
> Current network config on host:
>
> # ip addr list
> 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
> link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
> inet 127.0.0.1/8 <http://127.0.0.1/8> scope host lo
> inet6 ::1/128 scope host
> valid_lft forever preferred_lft forever
> 2: em1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state
> UP
> qlen 1000
> link/ether 00:1e:0b:21:b8:c4 brd ff:ff:ff:ff:ff:ff
> inet6 fe80::21e:bff:fe21:b8c4/64 scope link
> valid_lft forever preferred_lft forever
> 3: em2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state
> UP
> qlen 1000
> link/ether 00:1e:0b:21:b8:c6 brd ff:ff:ff:ff:ff:ff
> inet6 fe80::21e:bff:fe21:b8c6/64 scope link
> valid_lft forever preferred_lft forever
> 4: em3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master
> ovirtmgmt state UP qlen 1000
> link/ether 00:1c:c4:ab:3a:dd brd ff:ff:ff:ff:ff:ff
> 5: em4: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state
> UP
> qlen 1000
> link/ether 00:1c:c4:ab:3a:de brd ff:ff:ff:ff:ff:ff
> inet6 fe80::21c:c4ff:feab:3ade/64 scope link
> valid_lft forever preferred_lft forever
> 6: em3.65@em3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
> noqueue
> state UP
> link/ether 00:1c:c4:ab:3a:dd brd ff:ff:ff:ff:ff:ff
> inet 10.4.4.59/24 <http://10.4.4.59/24> brd 10.4.4.255 scope
> global
> em3.65
> inet6 fe80::21c:c4ff:feab:3add/64 scope link
> valid_lft forever preferred_lft forever
> 11: ;vdsmdummy;: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state
> DOWN
> link/ether 96:14:65:da:bc:c5 brd ff:ff:ff:ff:ff:ff
> 12: bond0: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state
> DOWN
> link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
> 13: bond4: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state
> DOWN
> link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
> 14: bond1: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state
> DOWN
> link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
> 15: ovirtmgmt: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
> noqueue
> state UP
> link/ether 00:1c:c4:ab:3a:dd brd ff:ff:ff:ff:ff:ff
> inet6 fe80::21c:c4ff:feab:3add/64 scope link
> valid_lft forever preferred_lft forever
>
> # brctl show
> bridge namebridge idSTP enabledinterfaces
> ;vdsmdummy;8000.000000000000no
> ovirtmgmt8000.001cc4ab3addnoem3
>
> Do I have perhaps to say/config that ovirtmgmt is tagged in any
> way?
>
>
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
9:07 p.m.
On Sun, Jan 13, 2013 at 1:32 PM, Eli Mesika wrote:
----- Original Message -----
> From: "Livnat Peer"
> To: "Gianluca Cecchi"
> Cc: "users" <users(a)ovirt.org>
> Sent: Sunday, January 13, 2013 12:27:57 PM
> Subject: Re: [Users] win 7 vm creation:
>
> Hi Gianluca,
> From looking in the logs it looks like you had some DB upgrade issue,
> or
> DB clean install issue.
>
> "Caused by: org.postgresql.util.PSQLException: The column name
> count_threads_as_cores was not found in this ResultSet"
>
> Adding Doron to take take a look, and I think Einav also had some db
> upgrade issue last week...
Yes, she had, there was a bug on upgrade for pg 9.x (f18 defaulted to that)
Anyway, this was merged already upstream
http://gerrit.ovirt.org/#/c/10778/
You can fix and rerun the upgrade again
Hello,
now I have a setup with engine and host on separate servers, both
fedora 18 and on engine rpm nightly as of 3.2.0-1.20130113.gitc954518
I get again this problem with a w7 vm.
If I select run on any host I get
w7test:
Cannot run VM. There are no available running Hosts in the Host Cluster.
If I select this particular (and currently only) host I get
w7test:
Cannot run VM. VM is pinned to a specific Host but cannot run on it due to:
Invalid Host status or not enough free resources on it.
You may free resources on the Host by migrating other VMs.
Cannot run VM. There are no available running Hosts in the Host Cluster.
My
03_02_0100_add_cpu_thread_columns.sql
contains
"
select fn_db_add_column('vds_groups', 'count_threads_as_cores',
'BOOLEAN NOT NULL DEFAULT FALSE');
select fn_db_add_column('vds_dynamic', 'cpu_threads', 'INTEGER');
"
So what should I do?
My latest engine-upgrade was run on 14th of January
If I want to stay at the moment on this release version should I only
do upgrade of db after patch?
so
- stop engine
# systemctl stop ovirt-engine.service
cd /usr/share/ovirt-engine/dbscripts
- patch drop_old_uuid_functions.sql
- backup DB
./backup.sh
- upgrade DB agan
./upgrade.sh
?
Thanks
Gianluca
2:08 a.m.
On Thu, Jan 24, 2013 at 7:07 PM, Gianluca Cecchi wrote:
My latest engine-upgrade was run on 14th of January
If I want to stay at the moment on this release version should I only
do upgrade of db after patch?
Never mind,
I decided to update to 3.2.0-1.20130123.git2ad65d0 that contains the
fix and I was able to start the windows 7 vm
Gianluca
4320
days inactive
4339
days old
9 comments
4 participants
participants (4)
-
Doron Fediuck -
Eli Mesika -
Gianluca Cecchi -
Livnat Peer