On Tue, Apr 16, 2019 at 2:39 PM Magnus Isaksson <magnus(a)vmar.se&gt; wrote: Even if you run gluster outside of oVirt, you are using the disperse volume as storage domain? For a supported config, you can create a distributed-replica+arbiter gluster volume. Since you have 12 disks, you can use a 5 x 3 (arbiter) setup, where a disk is partitioned to multiple arbiter bricks, something like this (c11,c12, a31, a32 are arbiter bricks) : a1 b1 c11 a2 b2 c12 b3 c13 d1 a31 c2 d2 a32 c3 d3 > > //Magnus > > > ________________________________ > From: Sahina Bose <sabose(a)redhat.com&gt; > Sent: 16 April 2019 10:55 > To: Magnus Isaksson > Cc: users > Subject: Re: [ovirt-users] Gluster suggestions > > On Tue, Apr 16, 2019 at 1:42 PM <magnus(a)vmar.se&gt; wrote: > > > > Hello > > > > I would like some suggestions on what type of solution with Gluster i should use. > > > > I have 4 hosts with 3 disks each, i want to user as much space as possible but also some redundancy, like raid5 or 6 > > The 4 hosts are running oVirt on CentOS 7 > > I have 2 clusters due to some licensing issues, so i cant use ovirts setup of gluster > > I did not quite get this - are you saying you can have only 2 nodes in > one cluster? > > > > > Today i have set it up as follows > > Type: Disperse > > Number of Bricks: 1 x (8 + 4) = 12 > > Disperse volumes are not supported with oVirt. It's either replica 3 > or replica 2 + arbiter. > > > > > So i have 3 bricks per host (one brick per disk) > > > > But this setup is not working very well, as soon as i get some traffic on the volume this start to fail on the ovirt nodes, loosing connection etc. > > > > All hosts are connected via 10G interface > > > > So any suggestions on how i would set this up as best is much appreciated. > > > > Regards > > Magnus Isaksson > > _______________________________________________ > > Users mailing list -- users(a)ovirt.org > > To unsubscribe send an email to users-leave(a)ovirt.org > > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > > oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ > > List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/AIEPMRANHFB...