From: "Hetz Ben Hamo" <hetz(a)hetz.biz&gt; To: &quot;users(a)oVirt.org&quot; <users(a)ovirt.org&gt; Cc: "Sandro Bonazzola" <sbonazzo(a)redhat.com&gt;, alonbl(a)redhat.com Sent: Wednesday, July 17, 2013 4:05:46 PM Subject: bug with ovirt nightlies and engine-setup-2 script * * Hi, I installed the all in one plugin and run the engine-setup-2 script. it detects the plugin, and I'm using the iptables option. problem is that it writes the wrong lines in iptables: -A INPUT -p tcp -m state --state NEW -m tcp --dport 5634-6166 -j ACCEPT -A INPUT -p tcp -m state --state NEW -m tcp --dport 49152-49216 -j ACCEPT iptables does not accept the minus sign when mentioning port range, so 5634-6166 should be 5634:6166 (I wish it would accept the minus sign, it's a stupid thing that it doesn't).

So the script failes to start iptables due to these wrong lines, and I'm stuck with oVirt that doesn't work.

Log file - enclosed. Hetz

From: "Hetz Ben Hamo" <hetz(a)hetz.biz&gt; To: "Alon Bar-Lev" <alonbl(a)redhat.com&gt; Cc: &quot;users(a)oVirt.org&quot; <users(a)ovirt.org&gt;, "Sandro Bonazzola" <sbonazzo(a)redhat.com&gt; Sent: Wednesday, July 17, 2013 11:56:48 PM Subject: Re: bug with ovirt nightlies and engine-setup-2 script Thanks for the patch. I just found another problem, my desktop probably gets heat too much and it was stuck. I'm trying the no firewall approach (engine-cleanup-2, engine-setup-2) but now it fails with the message that it failed to clear zombie tasks. How can I clear it manually?

תודה, *חץ בן חמו* "*חץ ביז <http://www.hetz.biz>*"- שרותי פרילאנס לניהול ותחזוקת שרתי Linux ופתרונות וירטואליזציה. טלפון: 054-5297156 אתם מוזמנים לבקר אותנו בבלוג היעוץ שלנו <http://vps-consulting.info> [image: גם אתר זה מתארח ב-חץ ביז שרתי VPS] * * 2013/7/17 Alon Bar-Lev <alonbl(a)redhat.com&gt; > > > ----- Original Message ----- > > From: "Hetz Ben Hamo" <hetz(a)hetz.biz&gt; > > To: &quot;users(a)oVirt.org&quot; <users(a)ovirt.org&gt; > > Cc: "Sandro Bonazzola" <sbonazzo(a)redhat.com&gt;, alonbl(a)redhat.com > > Sent: Wednesday, July 17, 2013 4:05:46 PM > > Subject: bug with ovirt nightlies and engine-setup-2 script > > > > * > > * > > Hi, > > > > I installed the all in one plugin and run the engine-setup-2 script. it > > detects the plugin, and I'm using the iptables option. problem is that it > > writes the wrong lines in iptables: > > > > -A INPUT -p tcp -m state --state NEW -m tcp --dport 5634-6166 -j ACCEPT > > -A INPUT -p tcp -m state --state NEW -m tcp --dport 49152-49216 -j ACCEPT > > > > iptables does not accept the minus sign when mentioning port range, so > > 5634-6166 should be 5634:6166 (I wish it would accept the minus sign, > it's > > a stupid thing that it doesn't). > > Confirmed, thanks! > Patch is available[1]. > > > So the script failes to start iptables due to these wrong lines, and I'm > > stuck with oVirt that doesn't work. > > You can select no firewall to workaround this. > > > > > Log file - enclosed. > > > > Hetz > > > > [1] http://gerrit.ovirt.org/17036 >

From: "Hetz Ben Hamo" <hetz(a)hetz.biz&gt; To: "Alon Bar-Lev" <alonbl(a)redhat.com&gt; Cc: &quot;users(a)oVirt.org&quot; <users(a)ovirt.org&gt; Sent: Thursday, July 18, 2013 12:00:52 AM Subject: Re: [Users] bug with ovirt nightlies and engine-setup-2 script I did engine-cleanup-2 and then ran the engine-setup-2, in the middle of engine-setup-2 (in the Setup Validation), I got this message.

btw I'm on the irc there, look at the window ;) תודה, חץ בן חמו " חץ ב י ז "- שרותי פרילאנס לניהול ותחזוקת שרתי Linux ופתרונות וירטואליזציה. טלפון: 054-5297156 אתם מוזמנים לבקר אותנו בבלוג היעוץ שלנו 2013/7/17 Alon Bar-Lev < alonbl(a)redhat.com > ----- Original Message ----- > From: "Hetz Ben Hamo" < hetz(a)hetz.biz > > To: "Alon Bar-Lev" < alonbl(a)redhat.com > > Cc: &quot;users(a)oVirt.org&quot; < users(a)ovirt.org >, "Sandro Bonazzola" < > sbonazzo(a)redhat.com > > Sent: Wednesday, July 17, 2013 11:56:48 PM > Subject: Re: bug with ovirt nightlies and engine-setup-2 script > > Thanks for the patch. > > I just found another problem, my desktop probably gets heat too much and it > was stuck. I'm trying the no firewall approach (engine-cleanup-2, > engine-setup-2) but now it fails with the message that it failed to clear > zombie tasks. How can I clear it manually? Is it clean installation? If it does, try to clean database first using engine-cleanup-2. > > > תודה, > *חץ בן חמו* > "*חץ ביז < http://www.hetz.biz >*"- שרותי פרילאנס לניהול ותחזוקת שרתי Linux > ופתרונות וירטואליזציה. > טלפון: 054-5297156 > אתם מוזמנים לבקר אותנו בבלוג היעוץ שלנו < http://vps-consulting.info > > [image: גם אתר זה מתארח ב-חץ ביז שרתי VPS] > * > * > > > 2013/7/17 Alon Bar-Lev < alonbl(a)redhat.com > > > > > > > > ----- Original Message ----- > > > From: "Hetz Ben Hamo" < hetz(a)hetz.biz > > > > To: &quot;users(a)oVirt.org&quot; < users(a)ovirt.org > > > > Cc: "Sandro Bonazzola" < sbonazzo(a)redhat.com >, alonbl(a)redhat.com > > > Sent: Wednesday, July 17, 2013 4:05:46 PM > > > Subject: bug with ovirt nightlies and engine-setup-2 script > > > > > > * > > > * > > > Hi, > > > > > > I installed the all in one plugin and run the engine-setup-2 script. it > > > detects the plugin, and I'm using the iptables option. problem is that > > > it > > > writes the wrong lines in iptables: > > > > > > -A INPUT -p tcp -m state --state NEW -m tcp --dport 5634-6166 -j ACCEPT > > > -A INPUT -p tcp -m state --state NEW -m tcp --dport 49152-49216 -j > > > ACCEPT > > > > > > iptables does not accept the minus sign when mentioning port range, so > > > 5634-6166 should be 5634:6166 (I wish it would accept the minus sign, > > it's > > > a stupid thing that it doesn't). > > > > Confirmed, thanks! > > Patch is available[1]. > > > > > So the script failes to start iptables due to these wrong lines, and > > > I'm > > > stuck with oVirt that doesn't work. > > > > You can select no firewall to workaround this. > > > > > > > > Log file - enclosed. > > > > > > Hetz > > > > > > > [1] http://gerrit.ovirt.org/17036 > > > _______________________________________________ Users mailing list Users(a)ovirt.org http://lists.ovirt.org/mailman/listinfo/users

From: "Omer Frenkel" <ofrenkel(a)redhat.com&gt; To: "Eli Mesika" <emesika(a)redhat.com&gt;, "Hetz Ben Hamo" <hetz(a)hetz.biz&gt; Cc: &quot;users(a)oVirt.org&quot; <users(a)ovirt.org&gt; Sent: Thursday, July 18, 2013 9:20:02 AM Subject: Re: [Users] bug with ovirt nightlies and engine-setup-2 script ----- Original Message ----- > From: "Eli Mesika" <emesika(a)redhat.com&gt; > To: "Hetz Ben Hamo" <hetz(a)hetz.biz&gt; > Cc: &quot;users(a)oVirt.org&quot; <users(a)ovirt.org&gt; > Sent: Thursday, July 18, 2013 12:06:38 AM > Subject: Re: [Users] bug with ovirt nightlies and engine-setup-2 script > > > > ----- Original Message ----- > > From: "Hetz Ben Hamo" <hetz(a)hetz.biz&gt; > > To: "Alon Bar-Lev" <alonbl(a)redhat.com&gt; > > Cc: &quot;users(a)oVirt.org&quot; <users(a)ovirt.org&gt; > > Sent: Thursday, July 18, 2013 12:00:52 AM > > Subject: Re: [Users] bug with ovirt nightlies and engine-setup-2 script > > > > I did engine-cleanup-2 and then ran the engine-setup-2, in the middle of > > engine-setup-2 (in the Setup Validation), I got this message. > > > Hi , you have a taskcleaner.sh utility under the dbutils directory that can > help you to clean those tasks > happened to me as well, if the above didn't help try removing ~/ovirt-engine dir and try again.

> > > > btw I'm on the irc there, look at the window ;) > > > > תודה, > > חץ בן חמו > > " חץ ב י ז "- שרותי פרילאנס לניהול ותחזוקת שרתי Linux ופתרונות > > וירטואליזציה. > > טלפון: 054-5297156 > > אתם מוזמנים לבקר אותנו בבלוג היעוץ שלנו > > > > > > 2013/7/17 Alon Bar-Lev < alonbl(a)redhat.com > > > > > > > > > > > > > ----- Original Message ----- > > > From: "Hetz Ben Hamo" < hetz(a)hetz.biz > > > > To: "Alon Bar-Lev" < alonbl(a)redhat.com > > > > Cc: &quot;users(a)oVirt.org&quot; < users(a)ovirt.org >, "Sandro Bonazzola" < > > > sbonazzo(a)redhat.com > > > > Sent: Wednesday, July 17, 2013 11:56:48 PM > > > Subject: Re: bug with ovirt nightlies and engine-setup-2 script > > > > > > Thanks for the patch. > > > > > > I just found another problem, my desktop probably gets heat too much > > > and > > > it > > > was stuck. I'm trying the no firewall approach (engine-cleanup-2, > > > engine-setup-2) but now it fails with the message that it failed to > > > clear > > > zombie tasks. How can I clear it manually? > > > > Is it clean installation? > > If it does, try to clean database first using engine-cleanup-2. > > > > > > > > > > > תודה, > > > *חץ בן חמו* > > > "*חץ ביז < http://www.hetz.biz >*"- שרותי פרילאנס לניהול ותחזוקת שרתי > > > Linux > > > ופתרונות וירטואליזציה. > > > טלפון: 054-5297156 > > > אתם מוזמנים לבקר אותנו בבלוג היעוץ שלנו < http://vps-consulting.info > > > > [image: גם אתר זה מתארח ב-חץ ביז שרתי VPS] > > > * > > > * > > > > > > > > > 2013/7/17 Alon Bar-Lev < alonbl(a)redhat.com > > > > > > > > > > > > > > > > ----- Original Message ----- > > > > > From: "Hetz Ben Hamo" < hetz(a)hetz.biz > > > > > > To: &quot;users(a)oVirt.org&quot; < users(a)ovirt.org > > > > > > Cc: "Sandro Bonazzola" < sbonazzo(a)redhat.com >, alonbl(a)redhat.com > > > > > Sent: Wednesday, July 17, 2013 4:05:46 PM > > > > > Subject: bug with ovirt nightlies and engine-setup-2 script > > > > > > > > > > * > > > > > * > > > > > Hi, > > > > > > > > > > I installed the all in one plugin and run the engine-setup-2 > > > > > script. > > > > > it > > > > > detects the plugin, and I'm using the iptables option. problem is > > > > > that > > > > > it > > > > > writes the wrong lines in iptables: > > > > > > > > > > -A INPUT -p tcp -m state --state NEW -m tcp --dport 5634-6166 -j > > > > > ACCEPT > > > > > -A INPUT -p tcp -m state --state NEW -m tcp --dport 49152-49216 -j > > > > > ACCEPT > > > > > > > > > > iptables does not accept the minus sign when mentioning port range, > > > > > so > > > > > 5634-6166 should be 5634:6166 (I wish it would accept the minus > > > > > sign, > > > > it's > > > > > a stupid thing that it doesn't). > > > > > > > > Confirmed, thanks! > > > > Patch is available[1]. > > > > > > > > > So the script failes to start iptables due to these wrong lines, > > > > > and > > > > > I'm > > > > > stuck with oVirt that doesn't work. > > > > > > > > You can select no firewall to workaround this. > > > > > > > > > > > > > > Log file - enclosed. > > > > > > > > > > Hetz > > > > > > > > > > > > > [1] http://gerrit.ovirt.org/17036 > > > > > > > > > > > > > _______________________________________________ > > Users mailing list > > Users(a)ovirt.org > > http://lists.ovirt.org/mailman/listinfo/users > > > _______________________________________________ > Users mailing list > Users(a)ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > _______________________________________________ Users mailing list Users(a)ovirt.org http://lists.ovirt.org/mailman/listinfo/users