9:01 a.m.
Dears,
I'm trying to setup a lab for Ovirt 4.2 on VMware ESXi 6.5.
I checked "Expose hardware assisted virtualization to the guest OS" and
"Enable
virtualized CPU performance counters" options to activate the nested
virtualization.
I installed Ovirt node and I try to setup a self hosted engine on it.
All pre-configrations were done successfully. But when arriving to step
"Running engine-setup on the appliance", the Hosted engine VM wouldn't
start.
I open the VM console, it stuck a bios level. It display the following :
SeaBIOS (Version 1.10.2-3.el7_4.1)
Machine UUID ced5025d-eec1-458a-991c-cc3bba9392dd
Does anybody already encountered this issue? Is there any more parameters
to set in the ESXi for it to work?
Thanks for your help
Regards,
9:15 a.m.
It's been a while since I've used ESXi, but it's possible that the vSwitch
must be in promiscuous mode.
Have you tried other guests with the same configuration?
On Tue, Oct 31, 2017 at 10:01 AM, Mustapha Aissat <aissat.mus(a)gmail.com>
wrote:
Dears,
I'm trying to setup a lab for Ovirt 4.2 on VMware ESXi 6.5.
I checked "Expose hardware assisted virtualization to the guest OS" and
"Enable
virtualized CPU performance counters" options to activate the nested
virtualization.
I installed Ovirt node and I try to setup a self hosted engine on it.
All pre-configrations were done successfully. But when arriving to step
"Running engine-setup on the appliance", the Hosted engine VM wouldn't
start.
I open the VM console, it stuck a bios level. It display the following :
SeaBIOS (Version 1.10.2-3.el7_4.1)
Machine UUID ced5025d-eec1-458a-991c-cc3bba9392dd
Does anybody already encountered this issue? Is there any more parameters
to set in the ESXi for it to work?
Thanks for your help
Regards,
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
--
RYAN BARRY
SENIOR SOFTWARE ENGINEER - TEAM LEAD - RHEV HYPERVISOR
Red Hat NA <https://www.redhat.com/>
rbarry(a)redhat.com M: +1-651-815-9306 IM: rbarry
<https://red.ht/sig>
9:26 a.m.
--_000_150945996938923443leedsbeckettacuk_
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
We had a system some nodes on VMware in nested mode, I think they may have =
worked in 3.6 and VMware 6.0, when they were upgraded to VMware 6.5 and oVi=
rt 4.1 when the VMs were started they hung at the SeaBIOS prompt, if they w=
ere migrated to a oVirt bare metal node the VM would finish booting.
I had a Centos KVM VM on the VMware host in nested mode and it would boot V=
Ms without a problem.
Regards,
Paul S.
________________________________
From: users-bounces(a)ovirt.org <users-bounces(a)ovirt.org> on behalf of Mustap=
ha Aissat <aissat.mus(a)gmail.com Sent: 31 October 2017 14:01
To: users(a)ovirt.org
Subject: [ovirt-users] Ovirt 4.2 Lab on ESXi
Dears,
I'm trying to setup a lab for Ovirt 4.2 on VMware ESXi 6.5.
I checked "Expose hardware assisted virtualization to the guest OS" and
"En=
able virtualized CPU performance counters" options to activate the nested v=
irtualization.
I installed Ovirt node and I try to setup a self hosted engine on it.
All pre-configrations were done successfully. But when arriving to step "R=
unning engine-setup on the appliance", the Hosted engine VM wouldn't start.
I open the VM console, it stuck a bios level. It display the following :
SeaBIOS (Version 1.10.2-3.el7_4.1)
Machine UUID ced5025d-eec1-458a-991c-cc3bba9392dd
Does anybody already encountered this issue? Is there any more parameters t=
o set in the ESXi for it to work?
Thanks for your help
Regards,
To view the terms under which this email is distributed, please go to:-
http://disclaimer.leedsbeckett.ac.uk/disclaimer/disclaimer.html
--_000_150945996938923443leedsbeckettacuk_
Content-Type: text/html; charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<html <head <meta http-equiv=3D"Content-Type"
content=3D"text/html; charset=3Diso-8859-=
1" <style type=3D"text/css"
style=3D"display:none"><!--P{margin-top:0;margin-b=
ottom:0;} --></style </head <body dir=3D"ltr"
style=3D"font-size:12pt;color:#000000;background-color:#F=
FFFFF;font-family:Calibri,Arial,Helvetica,sans-serif;"
<p>We had a system some nodes on
VMware in nested mode, I th=
ink they may have worked in 3.6 and
VMware 6.=
0, when they
were upgraded to VMware 6.5 and&=
nbsp;oVirt 4.1 when the VMs were
started they hung=
at the SeaBIOS prompt, if
they were mig=
rated to a oVirt bare
metal node the VM would finish booting.</p
<p><br </p
<p>I had a Centos KVM VM on the VMware host in nested mode and it
woul=
d boot VMs without a problem.</p
<p><br </p
<p>Regards,</p <p>
Paul S. <br </p <div style=3D"color: rgb(33,
33, 33);" <hr tabindex=3D"-1"
style=3D"display:inline-block; width:98%" <div
id=3D"divRplyFwdMsg" dir=3D"ltr"><font
style=3D"font-size:11pt" face=
=3D"Calibri, sans-serif" color=3D"#000000"><b>From:</b>
users-bounces@ovirt=
.org &lt;users-bounces(a)ovirt.org&gt; on behalf of Mustapha Aissat <aissa=
t.mus(a)gmail.com&gt;<br <b>Sent:</b> 31 October
2017 14:01<br <b>To:</b>
users(a)ovirt.org<br <b>Subject:</b>
[ovirt-users] Ovirt 4.2 Lab on ESXi</font
<div> </div
</div <div <div
dir=3D"ltr" <div>Dears,<br </div
<div><br </div <div>I'm trying to setup a lab for Ovirt 4.2 on
VMware ESXi 6.5.</div <div>I checked
"Expose hardware assisted virtualization to the guest O=
S"<span class=3D"gmail-"> and "</span>Enable
virtualized CPU perf=
ormance counters" options to activate the nested virtualization.</div <div><br
</div <div>I installed Ovirt node
and I try to setup a self hosted engine on it.<=
/div <div>All pre-configrations were done successfully. But
when arriving to ste=
p "Running engine-setup on the appliance", the Hosted engin=
e VM wouldn't start.</div <div><br </div
<div>I open the VM console, it stuck a bios level. It display the following=
:<br </div <div><br
</div <div>SeaBIOS (Version
1.10.2-3.el7_4.1)<br </div <div>Machine UUID
ced5025d-eec1-458a-991c-cc3bba9392dd<br
</div <div></div <div><br
</div <div>Does anybody already
<span id=3D"gmail-result_box" class=3D"gmail-shor=
t_text" lang=3D"en" <span
class=3D"gmail-">encountered</span></span> this issue? Is there
any m=
ore parameters to set in the ESXi for it to work?
<br </div
<div><br </div <div>Thanks for your help<br </div
Regards,<br </div </div
</div To view the terms under which this
email is distributed, please go to:- <br=
<a
href=3D"http://disclaimer.leedsbeckett.ac.uk/disclaimer/disclaimer.html"=
target=3D"_blank">http://disclaimer.leedsbeckett.ac.uk/disclaimer/disclaim=
er.html</a <p></p </body
</html
--_000_150945996938923443leedsbeckettacuk_--
3:06 p.m.
Simone, any thoughts?
Based on some old bugs, I suspect the machine type is incorrect (there's
another bug about how the HE VM simply appears as "Linux"). Using
pc-i440fx-rhel7.2.0 is reported to work
On Tue, Oct 31, 2017 at 10:26 AM, Staniforth, Paul <
P.Staniforth(a)leedsbeckett.ac.uk> wrote:
We had a system some nodes on VMware in nested mode, I think they may
have
worked in 3.6 and VMware 6.0, when they were upgraded to VMware 6.5 and oVirt 4.1 when
the VMs were started they hung at the SeaBIOS prompt, if
they were migrated to a oVirt bare metal node the VM would finish booting.
I had a Centos KVM VM on the VMware host in nested mode and it would boot
VMs without a problem.
Regards,
Paul S.
------------------------------
*From:* users-bounces(a)ovirt.org <users-bounces(a)ovirt.org> on behalf of
Mustapha Aissat <aissat.mus(a)gmail.com>
*Sent:* 31 October 2017 14:01
*To:* users(a)ovirt.org
*Subject:* [ovirt-users] Ovirt 4.2 Lab on ESXi
Dears,
I'm trying to setup a lab for Ovirt 4.2 on VMware ESXi 6.5.
I checked "Expose hardware assisted virtualization to the guest OS" and
"Enable
virtualized CPU performance counters" options to activate the nested
virtualization.
I installed Ovirt node and I try to setup a self hosted engine on it.
All pre-configrations were done successfully. But when arriving to step
"Running engine-setup on the appliance", the Hosted engine VM wouldn't
start.
I open the VM console, it stuck a bios level. It display the following :
SeaBIOS (Version 1.10.2-3.el7_4.1)
Machine UUID ced5025d-eec1-458a-991c-cc3bba9392dd
Does anybody already encountered this issue? Is there any more parameters
to set in the ESXi for it to work?
Thanks for your help
Regards,
To view the terms under which this email is distributed, please go to:-
http://disclaimer.leedsbeckett.ac.uk/disclaimer/disclaimer.html
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
--
RYAN BARRY
SENIOR SOFTWARE ENGINEER - TEAM LEAD - RHEV HYPERVISOR
Red Hat NA <https://www.redhat.com/>
rbarry(a)redhat.com M: +1-651-815-9306 IM: rbarry
<https://red.ht/sig>
6:47 a.m.
I've had similar issue on Azure (Dv3/Ev3 hosts with nested virtualization
support) with CentOS 7.4 and oVirt 4.1.
libguestfs-test-tool wasn't working either though I was able to run a
kernel directly with qemu-kvm.
вт, 31 окт. 2017 г. в 23:07, Ryan Barry <rbarry(a)redhat.com>:
Simone, any thoughts?
Based on some old bugs, I suspect the machine type is incorrect (there's
another bug about how the HE VM simply appears as "Linux"). Using
pc-i440fx-rhel7.2.0 is reported to work
On Tue, Oct 31, 2017 at 10:26 AM, Staniforth, Paul <
P.Staniforth(a)leedsbeckett.ac.uk> wrote:
> We had a system some nodes on VMware in nested mode, I think
> they may have worked in 3.6 and VMware 6.0, when they
> were upgraded to VMware 6.5 and oVirt 4.1 when the VMs were
> started they hung at the SeaBIOS prompt, if they were migrated to a oVirt
> bare metal node the VM would finish booting.
>
>
> I had a Centos KVM VM on the VMware host in nested mode and it would boot
> VMs without a problem.
>
>
> Regards,
>
> Paul S.
> ------------------------------
> *From:* users-bounces(a)ovirt.org <users-bounces(a)ovirt.org> on behalf of
> Mustapha Aissat <aissat.mus(a)gmail.com>
> *Sent:* 31 October 2017 14:01
> *To:* users(a)ovirt.org
> *Subject:* [ovirt-users] Ovirt 4.2 Lab on ESXi
>
> Dears,
>
> I'm trying to setup a lab for Ovirt 4.2 on VMware ESXi 6.5.
> I checked "Expose hardware assisted virtualization to the guest OS" and
"Enable
> virtualized CPU performance counters" options to activate the nested
> virtualization.
>
> I installed Ovirt node and I try to setup a self hosted engine on it.
> All pre-configrations were done successfully. But when arriving to step
> "Running engine-setup on the appliance", the Hosted engine VM wouldn't
> start.
>
> I open the VM console, it stuck a bios level. It display the following :
>
> SeaBIOS (Version 1.10.2-3.el7_4.1)
> Machine UUID ced5025d-eec1-458a-991c-cc3bba9392dd
>
> Does anybody already encountered this issue? Is there any more
> parameters to set in the ESXi for it to work?
>
> Thanks for your help
> Regards,
> To view the terms under which this email is distributed, please go to:-
> http://disclaimer.leedsbeckett.ac.uk/disclaimer/disclaimer.html
>
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>
--
RYAN BARRY
SENIOR SOFTWARE ENGINEER - TEAM LEAD - RHEV HYPERVISOR
Red Hat NA <https://www.redhat.com/>
rbarry(a)redhat.com M: +1-651-815-9306 IM: rbarry
<https://red.ht/sig>
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
2581
days inactive
2582
days old
4 comments
4 participants
participants (4)
-
Mustapha Aissat -
Roman Bolshakov -
Ryan Barry -
Staniforth, Paul