10:57 a.m.
Hello everybody,
I would like to install oVirt Node on a IBM Machine, but after the
installation it can not boot. I get the message:
"/boot/efi/..." file not found
I try many different things like turn of uefi options in bios etc. but with
no effect.
Now I figure out that when I install full CentOS 7.3 from live DVD it just
boot normal.
Is there any workaround to get this to work?
Regards
Jonathan
10:35 p.m.
Adding some people who may help
Il 24 Ott 2017 09:58, "Jon bae" <jonbae77(a)gmail.com> ha scritto:
Hello everybody,
I would like to install oVirt Node on a IBM Machine, but after the
installation it can not boot. I get the message:
"/boot/efi/..." file not found
I try many different things like turn of uefi options in bios etc. but with
no effect.
Now I figure out that when I install full CentOS 7.3 from live DVD it just
boot normal.
Is there any workaround to get this to work?
Regards
Jonathan
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
10:46 p.m.
This is a multi-part message in MIME format.
--------------897F64AF6E9B1B955A29C4FE
Content-Type: text/plain; charset=utf-8
Content-Transfer-Encoding: 7bit
3 of my compute nodes are IBM x3650 M3 . I do not use oVirt Node but
rather plain CentOS 7 for the compute nodes. I use 4.1.6 too.
I remember I had a bad time trying to disable UEFI on the BIOS of those
servers. In my opinion, the firmware in that model ridden with problems.
In the end, I installed with UEFI (You will need a /boot/efi partition)
Once installed, I have not had any issues with them.
Eduardo Mayoral Jimeno (emayoral(a)arsys.es)
Administrador de sistemas. Departamento de Plataformas. Arsys internet.
+34 941 620 145 ext. 5153
On 24/10/17 09:57, Jon bae wrote:
Hello everybody,
I would like to install oVirt Node on a IBM Machine, but after the
installation it can not boot. I get the message:
"/boot/efi/..." file not found
I try many different things like turn of uefi options in bios etc. but
with no effect.
Now I figure out that when I install full CentOS 7.3 from live DVD it
just boot normal.
Is there any workaround to get this to work?
Regards
Jonathan
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
--------------897F64AF6E9B1B955A29C4FE
Content-Type: text/html; charset=utf-8
Content-Transfer-Encoding: 7bit
<html>
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=utf-8">
</head>
<body text="#000000" bgcolor="#FFFFFF">
<p>3 of my compute nodes are IBM x3650 M3 . I do not use oVirt Node
but rather plain CentOS 7 for the compute nodes. I use 4.1.6 too.<br>
</p>
<p>I remember I had a bad time trying to disable UEFI on the BIOS of
those servers. In my opinion, the firmware in that model ridden
with problems. In the end, I installed with UEFI (You will need a
/boot/efi partition)</p>
<p>Once installed, I have not had any issues with them.<br>
</p>
<pre class="moz-signature" cols="72">Eduardo Mayoral Jimeno
(<a class="moz-txt-link-abbreviated"
href="mailto:emayoral@arsys.es">emayoral@arsys.es</a>)
Administrador de sistemas. Departamento de Plataformas. Arsys internet.
+34 941 620 145 ext. 5153</pre>
<div class="moz-cite-prefix">On 24/10/17 09:57, Jon bae
wrote:<br>
</div>
<blockquote type="cite"
cite="mid:CAGLvV7QG6RG91dDyBeLqEOTtCBcOG9BaW_phWd1w1AjHrMr=jg@mail.gmail.com">
<meta http-equiv="Content-Type" content="text/html;
charset=utf-8">
<div dir="ltr">
<div>
<div>
<div>
<div>
<div>
<div>Hello everybody,<br>
</div>
I would like to install oVirt Node on a IBM Machine,
but after the installation it can not boot. I get the
message:<br>
<br>
</div>
"/boot/efi/..." file not found<br>
<br>
</div>
I try many different things like turn of uefi options in
bios etc. but with no effect. <br>
<br>
</div>
Now I figure out that when I install full CentOS 7.3 from
live DVD it just boot normal.<br>
<br>
</div>
Is there any workaround to get this to work?</div>
<div><br>
</div>
<div>Regards</div>
<div><br>
</div>
<div>Jonathan<br>
</div>
</div>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<br>
<pre wrap="">_______________________________________________
Users mailing list
<a class="moz-txt-link-abbreviated"
href="mailto:Users@ovirt.org">Users@ovirt.org</a>
<a class="moz-txt-link-freetext"
href="http://lists.ovirt.org/mailman/listinfo/users">http://...
</pre>
</blockquote>
<br>
</body>
</html>
--------------897F64AF6E9B1B955A29C4FE--
12:41 a.m.
I have seen this problem before. For some reason, oVirt Node 4.1.x does
not always install everything right for efi. In my limited experience,
it fails to do it correctly 4 out of 5 times. The mystery to me is why
it gets it right sometimes. I solve the problem by manually copying the
missing file into my efi boot partition.
On 10/24/2017 12:46 PM, Eduardo Mayoral wrote:
3 of my compute nodes are IBM x3650 M3 . I do not use oVirt Node but
rather plain CentOS 7 for the compute nodes. I use 4.1.6 too.
I remember I had a bad time trying to disable UEFI on the BIOS of
those servers. In my opinion, the firmware in that model ridden with
problems. In the end, I installed with UEFI (You will need a /boot/efi
partition)
Once installed, I have not had any issues with them.
Eduardo Mayoral Jimeno (emayoral(a)arsys.es)
Administrador de sistemas. Departamento de Plataformas. Arsys internet.
+34 941 620 145 ext. 5153
On 24/10/17 09:57, Jon bae wrote:
> Hello everybody,
> I would like to install oVirt Node on a IBM Machine, but after the
> installation it can not boot. I get the message:
>
> "/boot/efi/..." file not found
>
> I try many different things like turn of uefi options in bios etc.
> but with no effect.
>
> Now I figure out that when I install full CentOS 7.3 from live DVD it
> just boot normal.
>
> Is there any workaround to get this to work?
>
> Regards
>
> Jonathan
>
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
10:47 p.m.
Thank you, for your commands! I have now also install CentOS minimal,
this works. I only though that oVirt Node have some optimizations, but
maybe not.
@Eduardo Mayoral, can I ask you that you are able with this servers, to
use the power management? As I understand, they support ipmilan, but I
don't know how...
Regards
Jonathan
Am 24.10.2017 um 23:41 schrieb Sean McMurray:
I have seen this problem before. For some reason, oVirt Node 4.1.x
does not always install everything right for efi. In my limited
experience, it fails to do it correctly 4 out of 5 times. The mystery
to me is why it gets it right sometimes. I solve the problem by
manually copying the missing file into my efi boot partition.
On 10/24/2017 12:46 PM, Eduardo Mayoral wrote:
>
> 3 of my compute nodes are IBM x3650 M3 . I do not use oVirt Node but
> rather plain CentOS 7 for the compute nodes. I use 4.1.6 too.
>
> I remember I had a bad time trying to disable UEFI on the BIOS of
> those servers. In my opinion, the firmware in that model ridden with
> problems. In the end, I installed with UEFI (You will need a
> /boot/efi partition)
>
> Once installed, I have not had any issues with them.
>
> Eduardo Mayoral Jimeno (emayoral(a)arsys.es)
> Administrador de sistemas. Departamento de Plataformas. Arsys internet.
> +34 941 620 145 ext. 5153
> On 24/10/17 09:57, Jon bae wrote:
>> Hello everybody,
>> I would like to install oVirt Node on a IBM Machine, but after the
>> installation it can not boot. I get the message:
>>
>> "/boot/efi/..." file not found
>>
>> I try many different things like turn of uefi options in bios etc.
>> but with no effect.
>>
>> Now I figure out that when I install full CentOS 7.3 from live DVD
>> it just boot normal.
>>
>> Is there any workaround to get this to work?
>>
>> Regards
>>
>> Jonathan
>>
>>
>> _______________________________________________
>> Users mailing list
>> Users(a)ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>
>
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
10:59 p.m.
Yes, I use power management with ipmilan, no issues.
I do have license on the IMM for remote console, but that is not a
requirement, AFAIK.
I remember I first tried to use for oVirt a dedicated login on the IMM
with just "Remote Server Power/Restart Access" and I could not get to
work, so I just granted "Supervisor" to the dedicated login. Other than
that, no problem.
Eduardo Mayoral Jimeno (emayoral(a)arsys.es)
Administrador de sistemas. Departamento de Plataformas. Arsys internet.
+34 941 620 145 ext. 5153
On 26/10/17 21:47, Jonathan Baecker wrote:
Thank you, for your commands! I have now also install CentOS
minimal,
this works. I only though that oVirt Node have some optimizations, but
maybe not.
@Eduardo Mayoral, can I ask you that you are able with this servers,
to use the power management? As I understand, they support ipmilan,
but I don't know how...
Regards
Jonathan
Am 24.10.2017 um 23:41 schrieb Sean McMurray:
> I have seen this problem before. For some reason, oVirt Node 4.1.x
> does not always install everything right for efi. In my limited
> experience, it fails to do it correctly 4 out of 5 times. The mystery
> to me is why it gets it right sometimes. I solve the problem by
> manually copying the missing file into my efi boot partition.
>
>
> On 10/24/2017 12:46 PM, Eduardo Mayoral wrote:
>>
>> 3 of my compute nodes are IBM x3650 M3 . I do not use oVirt Node but
>> rather plain CentOS 7 for the compute nodes. I use 4.1.6 too.
>>
>> I remember I had a bad time trying to disable UEFI on the BIOS of
>> those servers. In my opinion, the firmware in that model ridden with
>> problems. In the end, I installed with UEFI (You will need a
>> /boot/efi partition)
>>
>> Once installed, I have not had any issues with them.
>>
>> Eduardo Mayoral Jimeno (emayoral(a)arsys.es)
>> Administrador de sistemas. Departamento de Plataformas. Arsys internet.
>> +34 941 620 145 ext. 5153
>> On 24/10/17 09:57, Jon bae wrote:
>>> Hello everybody,
>>> I would like to install oVirt Node on a IBM Machine, but after the
>>> installation it can not boot. I get the message:
>>>
>>> "/boot/efi/..." file not found
>>>
>>> I try many different things like turn of uefi options in bios etc.
>>> but with no effect.
>>>
>>> Now I figure out that when I install full CentOS 7.3 from live DVD
>>> it just boot normal.
>>>
>>> Is there any workaround to get this to work?
>>>
>>> Regards
>>>
>>> Jonathan
>>>
>>>
>>> _______________________________________________
>>> Users mailing list
>>> Users(a)ovirt.org
>>> http://lists.ovirt.org/mailman/listinfo/users
>>
>>
>>
>> _______________________________________________
>> Users mailing list
>> Users(a)ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
11:03 p.m.
Thank you, good to know that this works! I need to play a bit with it.
Am 26.10.2017 um 21:59 schrieb Eduardo Mayoral:
Yes, I use power management with ipmilan, no issues.
I do have license on the IMM for remote console, but that is not a
requirement, AFAIK.
I remember I first tried to use for oVirt a dedicated login on the IMM
with just "Remote Server Power/Restart Access" and I could not get to
work, so I just granted "Supervisor" to the dedicated login. Other than
that, no problem.
Eduardo Mayoral Jimeno (emayoral(a)arsys.es)
Administrador de sistemas. Departamento de Plataformas. Arsys internet.
+34 941 620 145 ext. 5153
On 26/10/17 21:47, Jonathan Baecker wrote:
> Thank you, for your commands! I have now also install CentOS minimal,
> this works. I only though that oVirt Node have some optimizations, but
> maybe not.
>
> @Eduardo Mayoral, can I ask you that you are able with this servers,
> to use the power management? As I understand, they support ipmilan,
> but I don't know how...
>
> Regards
> Jonathan
>
> Am 24.10.2017 um 23:41 schrieb Sean McMurray:
>> I have seen this problem before. For some reason, oVirt Node 4.1.x
>> does not always install everything right for efi. In my limited
>> experience, it fails to do it correctly 4 out of 5 times. The mystery
>> to me is why it gets it right sometimes. I solve the problem by
>> manually copying the missing file into my efi boot partition.
>>
>>
>> On 10/24/2017 12:46 PM, Eduardo Mayoral wrote:
>>> 3 of my compute nodes are IBM x3650 M3 . I do not use oVirt Node but
>>> rather plain CentOS 7 for the compute nodes. I use 4.1.6 too.
>>>
>>> I remember I had a bad time trying to disable UEFI on the BIOS of
>>> those servers. In my opinion, the firmware in that model ridden with
>>> problems. In the end, I installed with UEFI (You will need a
>>> /boot/efi partition)
>>>
>>> Once installed, I have not had any issues with them.
>>>
>>> Eduardo Mayoral Jimeno (emayoral(a)arsys.es)
>>> Administrador de sistemas. Departamento de Plataformas. Arsys internet.
>>> +34 941 620 145 ext. 5153
>>> On 24/10/17 09:57, Jon bae wrote:
>>>> Hello everybody,
>>>> I would like to install oVirt Node on a IBM Machine, but after the
>>>> installation it can not boot. I get the message:
>>>>
>>>> "/boot/efi/..." file not found
>>>>
>>>> I try many different things like turn of uefi options in bios etc.
>>>> but with no effect.
>>>>
>>>> Now I figure out that when I install full CentOS 7.3 from live DVD
>>>> it just boot normal.
>>>>
>>>> Is there any workaround to get this to work?
>>>>
>>>> Regards
>>>>
>>>> Jonathan
>>>>
>>>>
>>>> _______________________________________________
>>>> Users mailing list
>>>> Users(a)ovirt.org
>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>
>>>
>>> _______________________________________________
>>> Users mailing list
>>> Users(a)ovirt.org
>>> http://lists.ovirt.org/mailman/listinfo/users
>> _______________________________________________
>> Users mailing list
>> Users(a)ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
11:46 a.m.
Hi,
We did have some problems in the past with efi, but they should be fixed by
now.
Did you use the ISO for installation ? What error are you seeing - which
file is missing there ?
Thanks,
Yuval.
On Thu, Oct 26, 2017 at 11:03 PM, Jonathan Baecker <jonbae77(a)gmail.com>
wrote:
Thank you, good to know that this works! I need to play a bit with
it.
Am 26.10.2017 um 21:59 schrieb Eduardo Mayoral:
> Yes, I use power management with ipmilan, no issues.
>
> I do have license on the IMM for remote console, but that is not a
> requirement, AFAIK.
>
> I remember I first tried to use for oVirt a dedicated login on the IMM
> with just "Remote Server Power/Restart Access" and I could not get to
> work, so I just granted "Supervisor" to the dedicated login. Other than
> that, no problem.
>
> Eduardo Mayoral Jimeno (emayoral(a)arsys.es)
> Administrador de sistemas. Departamento de Plataformas. Arsys internet.
> +34 941 620 145 ext. 5153
>
> On 26/10/17 21:47, Jonathan Baecker wrote:
>
>> Thank you, for your commands! I have now also install CentOS minimal,
>> this works. I only though that oVirt Node have some optimizations, but
>> maybe not.
>>
>> @Eduardo Mayoral, can I ask you that you are able with this servers,
>> to use the power management? As I understand, they support ipmilan,
>> but I don't know how...
>>
>> Regards
>> Jonathan
>>
>> Am 24.10.2017 um 23:41 schrieb Sean McMurray:
>>
>>> I have seen this problem before. For some reason, oVirt Node 4.1.x
>>> does not always install everything right for efi. In my limited
>>> experience, it fails to do it correctly 4 out of 5 times. The mystery
>>> to me is why it gets it right sometimes. I solve the problem by
>>> manually copying the missing file into my efi boot partition.
>>>
>>>
>>> On 10/24/2017 12:46 PM, Eduardo Mayoral wrote:
>>>
>>>> 3 of my compute nodes are IBM x3650 M3 . I do not use oVirt Node but
>>>> rather plain CentOS 7 for the compute nodes. I use 4.1.6 too.
>>>>
>>>> I remember I had a bad time trying to disable UEFI on the BIOS of
>>>> those servers. In my opinion, the firmware in that model ridden with
>>>> problems. In the end, I installed with UEFI (You will need a
>>>> /boot/efi partition)
>>>>
>>>> Once installed, I have not had any issues with them.
>>>>
>>>> Eduardo Mayoral Jimeno (emayoral(a)arsys.es)
>>>> Administrador de sistemas. Departamento de Plataformas. Arsys internet.
>>>> +34 941 620 145 ext. 5153
>>>> On 24/10/17 09:57, Jon bae wrote:
>>>>
>>>>> Hello everybody,
>>>>> I would like to install oVirt Node on a IBM Machine, but after the
>>>>> installation it can not boot. I get the message:
>>>>>
>>>>> "/boot/efi/..." file not found
>>>>>
>>>>> I try many different things like turn of uefi options in bios etc.
>>>>> but with no effect.
>>>>>
>>>>> Now I figure out that when I install full CentOS 7.3 from live DVD
>>>>> it just boot normal.
>>>>>
>>>>> Is there any workaround to get this to work?
>>>>>
>>>>> Regards
>>>>>
>>>>> Jonathan
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Users mailing list
>>>>> Users(a)ovirt.org
>>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Users mailing list
>>>> Users(a)ovirt.org
>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>
>>> _______________________________________________
>>> Users mailing list
>>> Users(a)ovirt.org
>>> http://lists.ovirt.org/mailman/listinfo/users
>>>
>>
>> _______________________________________________
>> Users mailing list
>> Users(a)ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>
>
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
5:08 p.m.
We have an outstanding problem with 7.4 images on EFI, since platform moved
"grub2-efi" to "grub2-efi-x86_64". There's a patch pending here:
https://gerrit.ovirt.org/#/c/83008/
Hopefully merged soon.
In the meantime, using Anaconda from CentOS 7.3 via kickstart (with the
latest Node image) would work, but this isn't very convenient.
Otherwise, you can drop to a shell and manually copy
/run/sysroot/.../grubx64.efi to /boot/efi, but this isn't very nice.
On Tue, Oct 31, 2017 at 4:46 AM, Yuval Turgeman <yuvalt(a)redhat.com> wrote:
Hi,
We did have some problems in the past with efi, but they should be fixed
by now.
Did you use the ISO for installation ? What error are you seeing - which
file is missing there ?
Thanks,
Yuval.
On Thu, Oct 26, 2017 at 11:03 PM, Jonathan Baecker <jonbae77(a)gmail.com>
wrote:
> Thank you, good to know that this works! I need to play a bit with it.
>
>
>
> Am 26.10.2017 um 21:59 schrieb Eduardo Mayoral:
>
>> Yes, I use power management with ipmilan, no issues.
>>
>> I do have license on the IMM for remote console, but that is not a
>> requirement, AFAIK.
>>
>> I remember I first tried to use for oVirt a dedicated login on the IMM
>> with just "Remote Server Power/Restart Access" and I could not get to
>> work, so I just granted "Supervisor" to the dedicated login. Other
than
>> that, no problem.
>>
>> Eduardo Mayoral Jimeno (emayoral(a)arsys.es)
>> Administrador de sistemas. Departamento de Plataformas. Arsys internet.
>> +34 941 620 145 ext. 5153
>>
>> On 26/10/17 21:47, Jonathan Baecker wrote:
>>
>>> Thank you, for your commands! I have now also install CentOS minimal,
>>> this works. I only though that oVirt Node have some optimizations, but
>>> maybe not.
>>>
>>> @Eduardo Mayoral, can I ask you that you are able with this servers,
>>> to use the power management? As I understand, they support ipmilan,
>>> but I don't know how...
>>>
>>> Regards
>>> Jonathan
>>>
>>> Am 24.10.2017 um 23:41 schrieb Sean McMurray:
>>>
>>>> I have seen this problem before. For some reason, oVirt Node 4.1.x
>>>> does not always install everything right for efi. In my limited
>>>> experience, it fails to do it correctly 4 out of 5 times. The mystery
>>>> to me is why it gets it right sometimes. I solve the problem by
>>>> manually copying the missing file into my efi boot partition.
>>>>
>>>>
>>>> On 10/24/2017 12:46 PM, Eduardo Mayoral wrote:
>>>>
>>>>> 3 of my compute nodes are IBM x3650 M3 . I do not use oVirt Node but
>>>>> rather plain CentOS 7 for the compute nodes. I use 4.1.6 too.
>>>>>
>>>>> I remember I had a bad time trying to disable UEFI on the BIOS of
>>>>> those servers. In my opinion, the firmware in that model ridden with
>>>>> problems. In the end, I installed with UEFI (You will need a
>>>>> /boot/efi partition)
>>>>>
>>>>> Once installed, I have not had any issues with them.
>>>>>
>>>>> Eduardo Mayoral Jimeno (emayoral(a)arsys.es)
>>>>> Administrador de sistemas. Departamento de Plataformas. Arsys
>>>>> internet.
>>>>> +34 941 620 145 ext. 5153
>>>>> On 24/10/17 09:57, Jon bae wrote:
>>>>>
>>>>>> Hello everybody,
>>>>>> I would like to install oVirt Node on a IBM Machine, but after
the
>>>>>> installation it can not boot. I get the message:
>>>>>>
>>>>>> "/boot/efi/..." file not found
>>>>>>
>>>>>> I try many different things like turn of uefi options in bios
etc.
>>>>>> but with no effect.
>>>>>>
>>>>>> Now I figure out that when I install full CentOS 7.3 from live
DVD
>>>>>> it just boot normal.
>>>>>>
>>>>>> Is there any workaround to get this to work?
>>>>>>
>>>>>> Regards
>>>>>>
>>>>>> Jonathan
>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> Users mailing list
>>>>>> Users(a)ovirt.org
>>>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Users mailing list
>>>>> Users(a)ovirt.org
>>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>>
>>>> _______________________________________________
>>>> Users mailing list
>>>> Users(a)ovirt.org
>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>
>>>
>>> _______________________________________________
>>> Users mailing list
>>> Users(a)ovirt.org
>>> http://lists.ovirt.org/mailman/listinfo/users
>>>
>>
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
--
RYAN BARRY
SENIOR SOFTWARE ENGINEER - TEAM LEAD - RHEV HYPERVISOR
Red Hat NA <https://www.redhat.com/>
rbarry(a)redhat.com M: +1-651-815-9306 IM: rbarry
<https://red.ht/sig>
8:24 p.m.
On Tue, Oct 31, 2017 at 3:08 PM, Ryan Barry <rbarry(a)redhat.com> wrote:
We have an outstanding problem with 7.4 images on EFI, since platform
moved
"grub2-efi" to "grub2-efi-x86_64". There's a patch pending here:
https://gerrit.ovirt.org/#/c/83008/
Hopefully merged soon.
In the meantime, using Anaconda from CentOS 7.3 via kickstart (with the
latest Node image) would work, but this isn't very convenient.
Otherwise, you can drop to a shell and manually copy
/run/sysroot/.../grubx64.efi to /boot/efi, but this isn't very nice.
Hello,
i'm installing successfully on Lenovo Flex System x240 M5 Compute Node
via PXE and boot through legacy mode. I did the required setup on
Foreman by creating new Provisioning Templates (kickstart and PXELinux
configs based on
https://access.redhat.com/documentation/en-us/red_hat_virtualization/4.1/...
with few changes)
I haven't been able to start the setup when UEFI mode is enabled, but
is a problem connected first to grub2-uefi (discovery works only on
Legacy mode, no deployment requires workaround:
https://bugzilla.redhat.com/show_bug.cgi?id=1487107 ) and then maybe
to pxe firmware that loops on downloading the same
/grub/grub.cfg-01-MACADDRESS. But this shouldn't be related to oVirt
images.
Anyway setup done in legacy mode can't be booted via UEFI, because as
far as i can see no /boot/efi partition is created by autopart.
In case of start via cd iso image and using kickstart containing
autopart --type=thinp, will autopart understand that efi partition is
required and then setup everything needed?
Luca
--
"E' assurdo impiegare gli uomini di intelligenza eccellente per fare
calcoli che potrebbero essere affidati a chiunque se si usassero delle
macchine"
Gottfried Wilhelm von Leibnitz, Filosofo e Matematico (1646-1716)
"Internet è la più grande biblioteca del mondo.
Ma il problema è che i libri sono tutti sparsi sul pavimento"
John Allen Paulos, Matematico (1945-vivente)
Luca 'remix_tj' Lorenzetto, http://www.remixtj.net ,
<lorenzetto.luca(a)gmail.com>
10:05 p.m.
This is a multi-part message in MIME format.
--------------6C17BAC09CEE40ADADFB22A5
Content-Type: text/plain; charset=utf-8; format=flowed
Content-Transfer-Encoding: 8bit
Hello Yuval,
sorry for my late response! I installed from a USB stick... I try it now
again on a second machine and the exact message is:
*Failed to open \EFI\centos\grubx64.efi - Not Found**
**Fail to load image \EFI\centos\grubx64.efi - Not Found**
**start... image() returned Not Found*
What Brian Barry recommend didn't work for me to. I booted again from
the stick and choice Troubleshooting, there I can select "1", this
should mount my installation to a folder, but the starting process ended
up in a loop, where error comes up saying something about error on line
9. After a second round I lost my patience and I install again the
normal centos minimal.
Is there any performance benefit with installing from oVirt Node?
Regards
Jonathan
Am 31.10.2017 um 09:46 schrieb Yuval Turgeman:
Hi,
We did have some problems in the past with efi, but they should be
fixed by now.
Did you use the ISO for installation ? What error are you seeing -
which file is missing there ?
Thanks,
Yuval.
On Thu, Oct 26, 2017 at 11:03 PM, Jonathan Baecker <jonbae77(a)gmail.com
<mailto:jonbae77@gmail.com>> wrote:
Thank you, good to know that this works! I need to play a bit with
it.
Am 26.10.2017 um 21:59 schrieb Eduardo Mayoral:
Yes, I use power management with ipmilan, no issues.
I do have license on the IMM for remote console, but that is not a
requirement, AFAIK.
I remember I first tried to use for oVirt a dedicated login on
the IMM
with just "Remote Server Power/Restart Access" and I could not
get to
work, so I just granted "Supervisor" to the dedicated login.
Other than
that, no problem.
Eduardo Mayoral Jimeno (emayoral(a)arsys.es
<mailto:emayoral@arsys.es>)
Administrador de sistemas. Departamento de Plataformas. Arsys
internet.
+34 941 620 145 ext. 5153
<tel:%2B34%20941%20620%20145%20ext.%205153>
On 26/10/17 21:47, Jonathan Baecker wrote:
Thank you, for your commands! I have now also install
CentOS minimal,
this works. I only though that oVirt Node have some
optimizations, but
maybe not.
@Eduardo Mayoral, can I ask you that you are able with
this servers,
to use the power management? As I understand, they support
ipmilan,
but I don't know how...
Regards
Jonathan
Am 24.10.2017 um 23:41 schrieb Sean McMurray:
I have seen this problem before. For some reason,
oVirt Node 4.1.x
does not always install everything right for efi. In
my limited
experience, it fails to do it correctly 4 out of 5
times. The mystery
to me is why it gets it right sometimes. I solve the
problem by
manually copying the missing file into my efi boot
partition.
On 10/24/2017 12:46 PM, Eduardo Mayoral wrote:
3 of my compute nodes are IBM x3650 M3 . I do not
use oVirt Node but
rather plain CentOS 7 for the compute nodes. I use
4.1.6 too.
I remember I had a bad time trying to disable UEFI
on the BIOS of
those servers. In my opinion, the firmware in that
model ridden with
problems. In the end, I installed with UEFI (You
will need a
/boot/efi partition)
Once installed, I have not had any issues with them.
Eduardo Mayoral Jimeno (emayoral(a)arsys.es
<mailto:emayoral@arsys.es>)
Administrador de sistemas. Departamento de
Plataformas. Arsys internet.
+34 941 620 145 ext. 5153
<tel:%2B34%20941%20620%20145%20ext.%205153>
On 24/10/17 09:57, Jon bae wrote:
Hello everybody,
I would like to install oVirt Node on a IBM
Machine, but after the
installation it can not boot. I get the message:
"/boot/efi/..." file not found
I try many different things like turn of uefi
options in bios etc.
but with no effect.
Now I figure out that when I install full
CentOS 7.3 from live DVD
it just boot normal.
Is there any workaround to get this to work?
Regards
Jonathan
_______________________________________________
Users mailing list
Users(a)ovirt.org <mailto:Users@ovirt.org>
http://lists.ovirt.org/mailman/listinfo/users
<http://lists.ovirt.org/mailman/listinfo/users>
_______________________________________________
Users mailing list
Users(a)ovirt.org <mailto:Users@ovirt.org>
http://lists.ovirt.org/mailman/listinfo/users
<http://lists.ovirt.org/mailman/listinfo/users>
_______________________________________________
Users mailing list
Users(a)ovirt.org <mailto:Users@ovirt.org>
http://lists.ovirt.org/mailman/listinfo/users
<http://lists.ovirt.org/mailman/listinfo/users>
_______________________________________________
Users mailing list
Users(a)ovirt.org <mailto:Users@ovirt.org>
http://lists.ovirt.org/mailman/listinfo/users
<http://lists.ovirt.org/mailman/listinfo/users>
_______________________________________________
Users mailing list
Users(a)ovirt.org <mailto:Users@ovirt.org>
http://lists.ovirt.org/mailman/listinfo/users
<http://lists.ovirt.org/mailman/listinfo/users>
--------------6C17BAC09CEE40ADADFB22A5
Content-Type: text/html; charset=utf-8
Content-Transfer-Encoding: 8bit
<html>
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=utf-8">
</head>
<body text="#000000" bgcolor="#FFFFFF">
<div class="moz-cite-prefix">Hello Yuval,<br>
sorry for my late response! I installed from a USB stick... I try
it now again on a second machine and the exact message is:<br>
<br>
<blockquote><b>Failed to open \EFI\centos\grubx64.efi - Not
Found</b><b><br>
</b><b>Fail to load image \EFI\centos\grubx64.efi - Not
Found</b><b><br>
</b><b>start... image() returned Not Found</b><br>
<br>
</blockquote>
What Brian Barry recommend didn't work for me to. I booted again
from the stick and choice Troubleshooting, there I can select "1",
this should mount my installation to a folder, but the starting
process ended up in a loop, where error comes up saying something
about error on line 9. After a second round I lost my patience and
I install again the normal centos minimal. <br>
<br>
Is there any performance benefit with installing from oVirt Node?<br>
<br>
Regards<br>
Jonathan<br>
<br>
<br>
Am 31.10.2017 um 09:46 schrieb Yuval Turgeman:<br>
</div>
<blockquote type="cite"
cite="mid:CAGDbUeefFdFPGD_KkRiYSqLSR9D43GUVW0jwy7udAy420XOYgA@mail.gmail.com">
<div dir="ltr">Hi,
<div><br>
<div>We did have some problems in the past with efi, but they
should be fixed by now.</div>
<div>Did you use the ISO for installation ? What error are
you seeing - which file is missing there ?</div>
<div><br>
</div>
<div>Thanks,</div>
<div>Yuval.</div>
</div>
</div>
<div class="gmail_extra"><br>
<div class="gmail_quote">On Thu, Oct 26, 2017 at 11:03 PM,
Jonathan Baecker <span dir="ltr"><<a
href="mailto:jonbae77@gmail.com" target="_blank"
moz-do-not-send="true">jonbae77(a)gmail.com</a>&gt;</span>
wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0
.8ex;border-left:1px #ccc solid;padding-left:1ex">Thank you,
good to know that this works! I need to play a bit with it.
<div class="HOEnZb">
<div class="h5"><br>
<br>
<br>
Am 26.10.2017 um 21:59 schrieb Eduardo Mayoral:<br>
<blockquote class="gmail_quote" style="margin:0 0 0
.8ex;border-left:1px #ccc solid;padding-left:1ex">
Yes, I use power management with ipmilan, no issues.<br>
<br>
I do have license on the IMM for remote console, but
that is not a<br>
requirement, AFAIK.<br>
<br>
I remember I first tried to use for oVirt a dedicated
login on the IMM<br>
with just "Remote Server Power/Restart Access" and I
could not get to<br>
work, so I just granted "Supervisor" to the dedicated
login. Other than<br>
that, no problem.<br>
<br>
Eduardo Mayoral Jimeno (<a
href="mailto:emayoral@arsys.es" target="_blank"
moz-do-not-send="true">emayoral(a)arsys.es</a>)<br>
Administrador de sistemas. Departamento de
Plataformas. Arsys internet.<br>
<a href="tel:%2B34%20941%20620%20145%20ext.%205153"
value="+34941620145" target="_blank"
moz-do-not-send="true">+34 941 620 145 ext.
5153</a><br>
<br>
On 26/10/17 21:47, Jonathan Baecker wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0
.8ex;border-left:1px #ccc solid;padding-left:1ex">
Thank you, for your commands! I have now also
install CentOS minimal,<br>
this works. I only though that oVirt Node have some
optimizations, but<br>
maybe not.<br>
<br>
@Eduardo Mayoral, can I ask you that you are able
with this servers,<br>
to use the power management? As I understand, they
support ipmilan,<br>
but I don't know how...<br>
<br>
Regards<br>
Jonathan<br>
<br>
Am 24.10.2017 um 23:41 schrieb Sean McMurray:<br>
<blockquote class="gmail_quote" style="margin:0 0 0
.8ex;border-left:1px #ccc solid;padding-left:1ex">
I have seen this problem before. For some reason,
oVirt Node 4.1.x<br>
does not always install everything right for efi.
In my limited<br>
experience, it fails to do it correctly 4 out of 5
times. The mystery<br>
to me is why it gets it right sometimes. I solve
the problem by<br>
manually copying the missing file into my efi boot
partition.<br>
<br>
<br>
On 10/24/2017 12:46 PM, Eduardo Mayoral wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0
0 .8ex;border-left:1px #ccc
solid;padding-left:1ex">
3 of my compute nodes are IBM x3650 M3 . I do
not use oVirt Node but<br>
rather plain CentOS 7 for the compute nodes. I
use 4.1.6 too.<br>
<br>
I remember I had a bad time trying to disable
UEFI on the BIOS of<br>
those servers. In my opinion, the firmware in
that model ridden with<br>
problems. In the end, I installed with UEFI (You
will need a<br>
/boot/efi partition)<br>
<br>
Once installed, I have not had any issues with
them.<br>
<br>
Eduardo Mayoral Jimeno (<a
href="mailto:emayoral@arsys.es"
target="_blank"
moz-do-not-send="true">emayoral(a)arsys.es</a>)<br>
Administrador de sistemas. Departamento de
Plataformas. Arsys internet.<br>
<a
href="tel:%2B34%20941%20620%20145%20ext.%205153"
value="+34941620145" target="_blank"
moz-do-not-send="true">+34 941 620 145 ext.
5153</a><br>
On 24/10/17 09:57, Jon bae wrote:<br>
<blockquote class="gmail_quote" style="margin:0
0 0 .8ex;border-left:1px #ccc
solid;padding-left:1ex">
Hello everybody,<br>
I would like to install oVirt Node on a IBM
Machine, but after the<br>
installation it can not boot. I get the
message:<br>
<br>
"/boot/efi/..." file not found<br>
<br>
I try many different things like turn of uefi
options in bios etc.<br>
but with no effect.<br>
<br>
Now I figure out that when I install full
CentOS 7.3 from live DVD<br>
it just boot normal.<br>
<br>
Is there any workaround to get this to work?<br>
<br>
Regards<br>
<br>
Jonathan<br>
<br>
<br>
______________________________<wbr>_________________<br>
Users mailing list<br>
<a href="mailto:Users@ovirt.org"
target="_blank"
moz-do-not-send="true">Users(a)ovirt.org</a><br>
<a
href="http://lists.ovirt.org/mailman/listinfo/users"
rel="noreferrer" target="_blank"
moz-do-not-send="true">http://lists.ovirt.org/mailman<wbr...
</blockquote>
<br>
<br>
______________________________<wbr>_________________<br>
Users mailing list<br>
<a href="mailto:Users@ovirt.org"
target="_blank"
moz-do-not-send="true">Users(a)ovirt.org</a><br>
<a
href="http://lists.ovirt.org/mailman/listinfo/users"
rel="noreferrer" target="_blank"
moz-do-not-send="true">http://lists.ovirt.org/mailman<wbr...
</blockquote>
______________________________<wbr>_________________<br>
Users mailing list<br>
<a href="mailto:Users@ovirt.org"
target="_blank"
moz-do-not-send="true">Users(a)ovirt.org</a><br>
<a
href="http://lists.ovirt.org/mailman/listinfo/users"
rel="noreferrer" target="_blank"
moz-do-not-send="true">http://lists.ovirt.org/mailman<wbr...
</blockquote>
<br>
______________________________<wbr>_________________<br>
Users mailing list<br>
<a href="mailto:Users@ovirt.org"
target="_blank"
moz-do-not-send="true">Users(a)ovirt.org</a><br>
<a
href="http://lists.ovirt.org/mailman/listinfo/users"
rel="noreferrer" target="_blank"
moz-do-not-send="true">http://lists.ovirt.org/mailman<wbr...
</blockquote>
</blockquote>
<br>
<br>
______________________________<wbr>_________________<br>
Users mailing list<br>
<a href="mailto:Users@ovirt.org" target="_blank"
moz-do-not-send="true">Users(a)ovirt.org</a><br>
<a href="http://lists.ovirt.org/mailman/listinfo/users"
rel="noreferrer" target="_blank"
moz-do-not-send="true">http://lists.ovirt.org/mailman<wbr...
</div>
</div>
</blockquote>
</div>
<br>
</div>
</blockquote>
<p><br>
</p>
</body>
</html>
--------------6C17BAC09CEE40ADADFB22A5--
2577
days inactive
2586
days old
10 comments
8 participants
participants (8)
-
Eduardo Mayoral -
Jon bae -
Jonathan Baecker
-
Luca 'remix_tj' Lorenzetto -
Ryan Barry -
Sandro Bonazzola -
Sean McMurray -
Yuval Turgeman