Hi, the general recommendation for newer remote management cards that support it (like the ilo5/idrac9) is to use redfish. I personally do not have HP servers, so I can not give any advise on the specifics for ilo5. Apart from that recommendation: fence_ilo_ssh also supports ilo5 ( https://github.com/ClusterLabs/fence-agents/blob/master/agents/ilo_ssh/fe... ). IPMI is not really secure, I would say that is why it's not enabled by default in the new servers :) Greetings Klaas On 12/24/20 3:18 PM, ozmen62(a)hotmail.com wrote: > Hi, > I've red mail list about IPMI fencing. But clould not find a solution. > > We have HP gen 10 servers. they have iLO5 and fencing does not work. > > In redhat there is a solution > > > Issue > > No iLO5 fencing method available in RHV-manager > Power Management via IPMILAN does not work on HPE Gen 10 systems > Power Management via iLO4 does not work on HPE Gen 10 systems > > Resolution > > The IPMI interface has to be enabled in the security section of a iLO-5 on a HPE Gen 10 system in order to use the fence-agents iLO3, iLO4 or IPMILAN. > A user with Login permissions and Operator level access for IPMI should be sufficient for fencing. > > Root Cause > > The default settings of iLO-5 on a HPE Gen 10 system have disabled IPMI access to the management controller. The fence agents for iLO-3 onward default to be using IPMI in order to communicate with the management controller. Therefore iLO3, iLO4 as well as IPMILAN fail to connect to a iLO-5 management controller. > > > But, there is no IPMI option in power management. > > How can i enable power managemenet properly with iLO5 or IPMI? > > Thanks > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/privacy-policy.html > oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ > List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/JT2JNA2EVOB...