2012/10/24 Alexandre Santos <santosam72(a)gmail.com>
Thanks a lot... will try it later and give some feedback.
Alex
2012/10/24 Moran Goldboim <mgoldboi(a)redhat.com>
> On 10/22/2012 01:25 AM, Alexandre Santos wrote:
>
>> Hi,
>> I've been using a 8GB USB stick to boot the oVirt Node but with only 8
>> GB i have no swap and less than 1 GB available for log. I bought a 16 GB
>> but now I can't boot with this one.
>> It gives 2 warnings:
>> dracut Warning: Unable to process initqueue
>> dracut Warning: /dev/mapper/live-rw does not exist
>>
>> Dropping to debug shell.
>>
>> dmesg gives the following info:
>>
>> EXT4-fs (sda2): mounted filessystem without journal. Opts: (null)
>> then those warnings and the boot stops, going to a dracut shell.
>>
>> Any ideas?
>>
>> Alex
>>
>>
>> ______________________________**_________________
>> Users mailing list
>> Users(a)ovirt.org
>>
http://lists.ovirt.org/**mailman/listinfo/users<http://lists.ovirt.org...
>>
>
> might be this specific usb dirve.
> -try to look here:
http://forums.fedoraforum.org/**
>
showthread.php?t=281692<http://forums.fedoraforum.org/showthread.php?t...
> -you might try the nested virtualization option - described in the wiki[1]
>
> [1]
http://wiki.ovirt.org/wiki/**OVirt_Live<http://wiki.ovirt.org/wiki/OVi...
> Moran.
>
The solution was to change the kernel boot parameters when installing from
the CDROM.
Basically, root=live:/dev/sr0 did the trick. After rebooting, the USB had
all the links on dev, specially /dev/mapper/live-rw that was missing on the
prevous install.
Alex