Known issue "OLVM: Fails to Create/Delete/Modify Bond Interfaces with UEKR7 Kernel lower than "5.15.0-203.146.5.1" (Doc ID 2975009.1)" From the Doc: Solution This issue is fixed with following releases of kernel, nmstate and nispor. These are the minimum releases that needed to fix this issue. kernel-uek-5.15.0-203.146.5.1.el8uek.x86_64.rpm nmstate-1.4.5-2.0.1.el8_9.x86_64.rpm nispor-1.2.15-1.el8.x86_64.rpm -----Original Message----- From: kodfejtok-hamachi.6--- via Users <users(a)ovirt.org&gt; Sent: Wednesday, February 26, 2025 6:34 AM To: users(a)ovirt.org Subject: [ovirt-users] Re: Unable to create a network bond in OLVM Hey, I had the same issue with Oracle Linux Virtualization. There is a known bug which prevents using bonds. If you’re on Oracle Linux, you can use kernel version kernel-uek-0:5.15.0-103.114.4.el8uek, which is known to work. (Anything above that has not worked, below that works fine too). Unfortunately I don’t know anything about other OSes. Best regards, Mark _______________________________________________ Users mailing list -- users(a)ovirt.org To unsubscribe send an email to users-leave(a)ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/K6BINA3UIMI...