12:37 p.m.
I'm struggeling setting up my network in oVirt at the moment as I would
like to seperate specific VM's from other devices/clients in my network.
I have decent setup switching network using Vlans, this is also the fact
for ovirt and the storage nodes where teh ports are seperated between
storage and management.
Because I want to manage which client can acces which VM I need Vlan
tagging. The question is where are we going to do this, on the VM itself or
on the network I attach the VM's Nic to.
Because of the lacking documentation at this point it's not clear, so I
would like to figure out and maybe change the wiki there.
I also cannot understand why I can set an IP to a network and only the
subnet where I also can set DHCP which puts also the gateway.
I'm not able to set None or DHCP and can only add a network with IP, but
what IP and why ? Or just a 192.16.x.0 with a 255.255.255.0 subnet ?
I hope someone can clear this a little bit more out.
Thanks!
12:36 p.m.
Le 11/02/2013 11:37, Matt . a écrit :
I'm struggeling setting up my network in oVirt at the moment as I
would
like to seperate specific VM's from other devices/clients in my network.
I have decent setup switching network using Vlans, this is also the fact
for ovirt and the storage nodes where teh ports are seperated between
storage and management.
Because I want to manage which client can acces which VM I need Vlan
tagging. The question is where are we going to do this, on the VM itself
or on the network I attach the VM's Nic to.
Hi,
I have also some related questions about VLAN tagging.
In any linux, I can create some virtual interfaces dedicated to some
VLANs, like bond0:50
I was expecting oVirt to allow me to create such virtual interfaces, use
them in an oVirt "virtual network". Thus, any VM using this "virtual
network" would be insured to stay limited to this vlan.
I know I can create bond0:50 manually in Fedora, but I guess oVirt must
be implied in the network setup.
I also know I can setup my switches to make them do IP-vlan-tagging, but
the solution above looks smarter to me.
How do one usually do in that case?
--
Nicolas Ecarnot
11:27 p.m.
On 02/12/2013 12:36 PM, Nicolas Ecarnot wrote:
Le 11/02/2013 11:37, Matt . a écrit :
> I'm struggeling setting up my network in oVirt at the moment as I would
> like to seperate specific VM's from other devices/clients in my network.
>
> I have decent setup switching network using Vlans, this is also the fact
> for ovirt and the storage nodes where teh ports are seperated between
> storage and management.
>
> Because I want to manage which client can acces which VM I need Vlan
> tagging. The question is where are we going to do this, on the VM itself
> or on the network I attach the VM's Nic to.
Hi,
I have also some related questions about VLAN tagging.
In any linux, I can create some virtual interfaces dedicated to some
VLANs, like bond0:50
I was expecting oVirt to allow me to create such virtual interfaces, use
them in an oVirt "virtual network". Thus, any VM using this "virtual
network" would be insured to stay limited to this vlan.
I know I can create bond0:50 manually in Fedora, but I guess oVirt must
be implied in the network setup.
You should follow the next steps:
1. Create a new logical network from the networks main tab: define its
data-center and set its vlan-id to 50 (the VM network checkbox should be
checked)
2. Click on the created network in the networks main tab ---> Select the
'Clusters' sub-tab and ---> click on 'Assign/Unassign Network' and
attach the network to the cluster (which contains the hosts that are
expected to run the VMs).
3. Click on 'hosts' sub-tab of the network main tab for the same
network. You should be able to see the cluster's hosts. Select a host
and click on 'Setup Networks'.
4. In the 'setup networks' dialog you would see the host's interfaces on
the left side and the logical networks definition on the right.
Drag the network on top of an interface, or first drag a nic on top of
another to create a bond and then drag the network to that bond.
A command will be sent from the engine to the vdsm on the host to
configure the desired network configuration.
5. In order to persist the network configuration on the host you can
check the 'save network configuration' from 4.
Specifically in the case you've described, few device will be created on
the host:
1. bond0
2. bond0.50 - the vlan device
3. 'your-network' - the vm network bridge will be created as a linux
bridge on top of bond0.50
I also know I can setup my switches to make them do IP-vlan-tagging,
but
the solution above looks smarter to me.
How do one usually do in that case?
10:54 a.m.
On Tue, Feb 12, 2013 at 10:27 PM, Moti Asayag wrote:
You should follow the next steps:
1. Create a new logical network from the networks main tab: define its
data-center and set its vlan-id to 50 (the VM network checkbox should be
checked)
2. Click on the created network in the networks main tab ---> Select the
'Clusters' sub-tab and ---> click on 'Assign/Unassign Network' and
attach the network to the cluster (which contains the hosts that are
expected to run the VMs).
3. Click on 'hosts' sub-tab of the network main tab for the same
network. You should be able to see the cluster's hosts. Select a host
and click on 'Setup Networks'.
4. In the 'setup networks' dialog you would see the host's interfaces on
the left side and the logical networks definition on the right.
Drag the network on top of an interface, or first drag a nic on top of
another to create a bond and then drag the network to that bond.
A command will be sent from the engine to the vdsm on the host to
configure the desired network configuration.
5. In order to persist the network configuration on the host you can
check the 'save network configuration' from 4.
Hello,
I followed these steps to create a bonded VM network (no vlan tagging)
with 3.2 beta.
Only differences
- assignement of network to cluster (step 2) can also be completed
while in step 1)
- step 3 : to see the host and setup networks for it you have to
select the "unattached" check box
I don't understand if and how I can put lan parameters if I don't use
vlan tagging
I don't see any option for that, when I edit the "network" itself or
go through the "setup host networks"
For example the VMs that will attach to this new network that I called
"client" will have ip of the form
10.10.10.x/24 with gw 10.10.10.1
and eventually I would like to give an ip address to the created bond
itself. Can I?
Thanks,
Gianluca
11:37 a.m.
----- Original Message -----
On Tue, Feb 12, 2013 at 10:27 PM, Moti Asayag wrote:
>
> You should follow the next steps:
>
> 1. Create a new logical network from the networks main tab: define
> its
> data-center and set its vlan-id to 50 (the VM network checkbox
> should be
> checked)
> 2. Click on the created network in the networks main tab --->
> Select the
> 'Clusters' sub-tab and ---> click on 'Assign/Unassign Network'
and
> attach the network to the cluster (which contains the hosts that
> are
> expected to run the VMs).
> 3. Click on 'hosts' sub-tab of the network main tab for the same
> network. You should be able to see the cluster's hosts. Select a
> host
> and click on 'Setup Networks'.
> 4. In the 'setup networks' dialog you would see the host's
> interfaces on
> the left side and the logical networks definition on the right.
> Drag the network on top of an interface, or first drag a nic on top
> of
> another to create a bond and then drag the network to that bond.
> A command will be sent from the engine to the vdsm on the host to
> configure the desired network configuration.
> 5. In order to persist the network configuration on the host you
> can
> check the 'save network configuration' from 4.
Hello,
I followed these steps to create a bonded VM network (no vlan
tagging)
with 3.2 beta.
Only differences
- assignement of network to cluster (step 2) can also be completed
while in step 1)
- step 3 : to see the host and setup networks for it you have to
select the "unattached" check box
I don't understand if and how I can put lan parameters if I don't use
vlan tagging
I don't see any option for that, when I edit the "network" itself or
go through the "setup host networks"
Hi,
Can you please explain what do you mean by "lan parameters" that you're
trying to set?
For example the VMs that will attach to this new network that I
called
"client" will have ip of the form
10.10.10.x/24 with gw 10.10.10.1
and eventually I would like to give an ip address to the created bond
itself. Can I?
You can specify IP & Netmask statically on the interface that you attach the network
to on the host.
During the setup networks command you can see a "pencil" button on the network
which is on an interface (bond or NIC), click it and then you can see the boot protocol
options.
Thanks,
Gianluca
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
11:53 a.m.
On Thu, Feb 14, 2013 at 10:37 AM, Mike Kolesnik wrote:
> "client" will have ip of the form
> 10.10.10.x/24 with gw 10.10.10.1
>
> and eventually I would like to give an ip address to the created bond
> itself. Can I?
You can specify IP & Netmask statically on the interface that you attach the network
to on the host.
During the setup networks command you can see a "pencil" button on the network
which is on an interface (bond or NIC), click it and then you can
see the boot protocol options.
aha, ok... sorry I misunderstood
I thought I had to edit the bond itself in "Setup host networks" screen:
https://docs.google.com/file/d/0BwoPbcrMv8mvSDZqcU95MXlDMDA/edit?usp=sharing
Instead I have to edit the network (named "client" in my case):
https://docs.google.com/file/d/0BwoPbcrMv8mvYU1NVWNRVW0yUkE/edit?usp=sharing
and there I can see the network parameters and boot protocols.
All right now..
Thanks
Gianluca
11:24 p.m.
Hello.
Basically Ovirt operates with VLANs by creating tagged devices
ethX.<ID> and attaching them to the bridge named <network_name>.
For example: ovirt has ovirtmgmg, spice and 3 vm's networks: ovirtmgm (VLAN100),
spice (VLAN101), vmnet1-3 (VLAN 201-203)
Bridges for each networks will be created and attached:
ovirtmgmt eth0.100
spice eth0.101
vmnet1 eth0.201
vnet1 -- VM will be attached here
vmnet2 eth0.202
vnet2 -- VM will be attached here
vmnet3 eth0.203
vnet3 -- VM will be attached here
and so on.
A VM is attached using the tun interface to the VM network
You don't have to assign IP address to the bridge of any VM networks. IP addresses are
required only for
ovirtmgmt and display networks.
--
Best regards, Pavel Zhukov
mailto:pavel@zhukoff.net
On Mon, 11 Feb 2013, Matt . wrote:
I'm struggeling setting up my network in oVirt at the moment as I
would like to
seperate specific VM's from other devices/clients in my network.
I have decent setup switching network using Vlans, this is also the fact for
ovirt and the storage nodes where teh ports are seperated between storage and
management.
Because I want to manage which client can acces which VM I need Vlan tagging.
The question is where are we going to do this, on the VM itself or on the
network I attach the VM's Nic to.
Because of the lacking documentation at this point it's not clear, so I would
like to figure out and maybe change the wiki there.
I also cannot understand why I can set an IP to a network and only the subnet
where I also can set DHCP which puts also the gateway.
I'm not able to set None or DHCP and can only add a network with IP, but what
IP and why ? Or just a 192.16.x.0 with a 255.255.255.0 subnet ?
I hope someone can clear this a little bit more out.
Thanks!
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
11:43 p.m.
On 02/11/2013 12:37 PM, Matt . wrote:
I'm struggeling setting up my network in oVirt at the moment as I
would
like to seperate specific VM's from other devices/clients in my network.
You should define the 'logical networks' which describe the networks of
your setup.
See the response to Nicolas on this thread of the steps to achieve it.
If wish to create a network dedicated to storage which shouldn't allow
VMs to use it, it should be defined as non-vm network.
Once the network is assigned to a cluster, you can add new network
interface to your VMs which defines to which bridges (vm networks) they
are connected: hence, segregating the VMs is done by the vlan-id of the
bridge the VMs are connected to.
I have decent setup switching network using Vlans, this is also the
fact
for ovirt and the storage nodes where teh ports are seperated between
storage and management.
Because I want to manage which client can acces which VM I need Vlan
tagging. The question is where are we going to do this, on the VM itself
or on the network I attach the VM's Nic to.
Because of the lacking documentation at this point it's not clear, so I
would like to figure out and maybe change the wiki there.
I also cannot understand why I can set an IP to a network and only the
subnet where I also can set DHCP which puts also the gateway.
The default gateway can be provided for the management network only. You
can define its IP address either as static by providing its known IP
address or letting it determine the address from the DHCP server.
You cannot select 'None' as boot-protocol for the management network
since then the engine will not be able to communicate with the host.
However you can select 'none' boot-protocol to any other networks if wishes.
I'm not able to set None or DHCP and can only add a network with
IP, but
what IP and why ? Or just a 192.16.x.0 with a 255.255.255.0 subnet ?
I hope someone can clear this a little bit more out.
Thanks!
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
12:40 a.m.
Hi guys,
Thanks, this clears it more why we have VM and display options and how it's
used on the nics.
What hapens with me on a 3.2 installation when I want to attach a network
without IP (VM option or not) to a Nic I get the noticed error like I told
before:
Error while executing action Setup Networks: Illegal or Incomplete IP
Address
Here is the error from the log:
eth2 {id=713f2687-6d84-4010-9076-fbfc67cf6831,
vdsId=033febb8-4f52-4253-bb6d-a8807816affd, name=eth2,
macAddress=00:1c:c4:d8:cb:36, networkName=LAN_TEST, bondName=null,
bootProtocol=NONE, address=, subnet=, gateway=null, mtu=0, bridged=false,
speed=1000, type=0, networkImplementationDetails=null}],
removedNetworks=[],
removedBonds=[]), log id: 7a99dbd1
2013-02-12 23:31:08,783 INFO
[org.ovirt.engine.core.vdsbroker.vdsbroker.SetupNetworksVDSCommand]
(ajp--127.0.0.1-8702-10) [7289062c] FINISH, SetupNetworksVDSCommand, log
id: 7a99dbd1
2013-02-12 23:31:09,796 ERROR
[org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase]
(ajp--127.0.0.1-8702-10) [7289062c]
org.ovirt.engine.core.vdsbroker.vdsbroker.VDSNetworkException:
VDSGenericException: VDSNetworkException: Specified netmask or gateway but
not ip
2013-02-12 23:31:09,797 ERROR
[org.ovirt.engine.core.vdsbroker.VDSCommandBase] (ajp--127.0.0.1-8702-10)
[7289062c] Command SetupNetworksVDS execution failed. Exception:
VDSNetworkException: VDSGenericException: VDSNetworkException: Specified
netmask or gateway but not ip
2013-02-12 23:31:09,798 ERROR
[org.ovirt.engine.core.bll.network.host.SetupNetworksCommand]
(ajp--127.0.0.1-8702-10) [7289062c] Command
org.ovirt.engine.core.bll.network.host.SetupNetworksCommand throw Vdc Bll
exception. With error message VdcBLLException:
org.ovirt.engine.core.vdsbroker.vdsbroker.VDSNetworkException:
VDSGenericException: VDSNetworkException: Specified netmask or gateway but
not ip
Why does this happen on None Bootproto or DHCP ?
2013/2/12 Moti Asayag <masayag(a)redhat.com>
On 02/11/2013 12:37 PM, Matt . wrote:
> I'm struggeling setting up my network in oVirt at the moment as I would
> like to seperate specific VM's from other devices/clients in my network.
>
You should define the 'logical networks' which describe the networks of
your setup.
See the response to Nicolas on this thread of the steps to achieve it.
If wish to create a network dedicated to storage which shouldn't allow
VMs to use it, it should be defined as non-vm network.
Once the network is assigned to a cluster, you can add new network
interface to your VMs which defines to which bridges (vm networks) they
are connected: hence, segregating the VMs is done by the vlan-id of the
bridge the VMs are connected to.
> I have decent setup switching network using Vlans, this is also the fact
> for ovirt and the storage nodes where teh ports are seperated between
> storage and management.
>
> Because I want to manage which client can acces which VM I need Vlan
> tagging. The question is where are we going to do this, on the VM itself
> or on the network I attach the VM's Nic to.
>
> Because of the lacking documentation at this point it's not clear, so I
> would like to figure out and maybe change the wiki there.
>
> I also cannot understand why I can set an IP to a network and only the
> subnet where I also can set DHCP which puts also the gateway.
>
The default gateway can be provided for the management network only. You
can define its IP address either as static by providing its known IP
address or letting it determine the address from the DHCP server.
You cannot select 'None' as boot-protocol for the management network
since then the engine will not be able to communicate with the host.
However you can select 'none' boot-protocol to any other networks if
wishes.
> I'm not able to set None or DHCP and can only add a network with IP, but
> what IP and why ? Or just a 192.16.x.0 with a 255.255.255.0 subnet ?
>
> I hope someone can clear this a little bit more out.
>
> Thanks!
>
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
1:34 a.m.
On 02/13/2013 12:40 AM, Matt . wrote:
Hi guys,
Thanks, this clears it more why we have VM and display options and how
it's used on the nics.
What hapens with me on a 3.2 installation when I want to attach a
network without IP (VM option or not) to a Nic I get the noticed error
like I told before:
Error while executing action Setup Networks: Illegal or Incomplete IP
Address
Here is the error from the log:
Could you attach the rest parameters of this command ? (grep for all the
lines from the log that include the string: 7289062c)
eth2 {id=713f2687-6d84-4010-9076-fbfc67cf6831,
vdsId=033febb8-4f52-4253-bb6d-a8807816affd, name=eth2,
macAddress=00:1c:c4:d8:cb:36, networkName=LAN_TEST, bondName=null,
bootProtocol=NONE, address=, subnet=, gateway=null, mtu=0,
bridged=false, speed=1000, type=0, networkImplementationDetails=null}],
removedNetworks=[],
removedBonds=[]), log id: 7a99dbd1
2013-02-12 23:31:08,783 INFO
[org.ovirt.engine.core.vdsbroker.vdsbroker.SetupNetworksVDSCommand]
(ajp--127.0.0.1-8702-10) [7289062c] FINISH, SetupNetworksVDSCommand, log
id: 7a99dbd1
2013-02-12 23:31:09,796 ERROR
[org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase]
(ajp--127.0.0.1-8702-10) [7289062c]
org.ovirt.engine.core.vdsbroker.vdsbroker.VDSNetworkException:
VDSGenericException: VDSNetworkException: Specified netmask or gateway
but not ip
2013-02-12 23:31:09,797 ERROR
[org.ovirt.engine.core.vdsbroker.VDSCommandBase]
(ajp--127.0.0.1-8702-10) [7289062c] Command SetupNetworksVDS execution
failed. Exception: VDSNetworkException: VDSGenericException:
VDSNetworkException: Specified netmask or gateway but not ip
2013-02-12 23:31:09,798 ERROR
[org.ovirt.engine.core.bll.network.host.SetupNetworksCommand]
(ajp--127.0.0.1-8702-10) [7289062c] Command
org.ovirt.engine.core.bll.network.host.SetupNetworksCommand throw Vdc
Bll exception. With error message VdcBLLException:
org.ovirt.engine.core.vdsbroker.vdsbroker.VDSNetworkException:
VDSGenericException: VDSNetworkException: Specified netmask or gateway
but not ip
Why does this happen on None Bootproto or DHCP ?
2013/2/12 Moti Asayag <masayag(a)redhat.com <mailto:masayag@redhat.com>>
On 02/11/2013 12:37 PM, Matt . wrote:
> I'm struggeling setting up my network in oVirt at the moment as I
would
> like to seperate specific VM's from other devices/clients in my
network.
>
You should define the 'logical networks' which describe the networks of
your setup.
See the response to Nicolas on this thread of the steps to achieve it.
If wish to create a network dedicated to storage which shouldn't allow
VMs to use it, it should be defined as non-vm network.
Once the network is assigned to a cluster, you can add new network
interface to your VMs which defines to which bridges (vm networks) they
are connected: hence, segregating the VMs is done by the vlan-id of the
bridge the VMs are connected to.
> I have decent setup switching network using Vlans, this is also
the fact
> for ovirt and the storage nodes where teh ports are seperated between
> storage and management.
>
> Because I want to manage which client can acces which VM I need Vlan
> tagging. The question is where are we going to do this, on the VM
itself
> or on the network I attach the VM's Nic to.
>
> Because of the lacking documentation at this point it's not clear,
so I
> would like to figure out and maybe change the wiki there.
>
> I also cannot understand why I can set an IP to a network and only the
> subnet where I also can set DHCP which puts also the gateway.
>
The default gateway can be provided for the management network only. You
can define its IP address either as static by providing its known IP
address or letting it determine the address from the DHCP server.
You cannot select 'None' as boot-protocol for the management network
since then the engine will not be able to communicate with the host.
However you can select 'none' boot-protocol to any other networks if
wishes.
> I'm not able to set None or DHCP and can only add a network with
IP, but
> what IP and why ? Or just a 192.16.x.0 with a 255.255.255.0 subnet ?
>
> I hope someone can clear this a little bit more out.
>
> Thanks!
>
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org <mailto:Users@ovirt.org>
> http://lists.ovirt.org/mailman/listinfo/users
>
8:48 a.m.
----- Original Message -----
On 02/13/2013 12:40 AM, Matt . wrote:
> Hi guys,
>
> Thanks, this clears it more why we have VM and display options and
> how
> it's used on the nics.
>
> What hapens with me on a 3.2 installation when I want to attach a
> network without IP (VM option or not) to a Nic I get the noticed
> error
> like I told before:
>
> Error while executing action Setup Networks: Illegal or Incomplete
> IP
> Address
>
>
> Here is the error from the log:
Could you attach the rest parameters of this command ? (grep for all
the
lines from the log that include the string: 7289062c)
Even better if you could attach all the parameters printed as part of
SetupNetworksVDSCommand logging.
It seems that part is missing which makes it hard to identify what is the problem.
>
> eth2 {id=713f2687-6d84-4010-9076-fbfc67cf6831,
> vdsId=033febb8-4f52-4253-bb6d-a8807816affd, name=eth2,
> macAddress=00:1c:c4:d8:cb:36, networkName=LAN_TEST, bondName=null,
> bootProtocol=NONE, address=, subnet=, gateway=null, mtu=0,
> bridged=false, speed=1000, type=0,
> networkImplementationDetails=null}],
> removedNetworks=[],
> removedBonds=[]), log id: 7a99dbd1
> 2013-02-12 23:31:08,783 INFO
> [org.ovirt.engine.core.vdsbroker.vdsbroker.SetupNetworksVDSCommand]
> (ajp--127.0.0.1-8702-10) [7289062c] FINISH,
> SetupNetworksVDSCommand, log
> id: 7a99dbd1
> 2013-02-12 23:31:09,796 ERROR
> [org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase]
> (ajp--127.0.0.1-8702-10) [7289062c]
> org.ovirt.engine.core.vdsbroker.vdsbroker.VDSNetworkException:
> VDSGenericException: VDSNetworkException: Specified netmask or
> gateway
> but not ip
> 2013-02-12 23:31:09,797 ERROR
> [org.ovirt.engine.core.vdsbroker.VDSCommandBase]
> (ajp--127.0.0.1-8702-10) [7289062c] Command SetupNetworksVDS
> execution
> failed. Exception: VDSNetworkException: VDSGenericException:
> VDSNetworkException: Specified netmask or gateway but not ip
> 2013-02-12 23:31:09,798 ERROR
> [org.ovirt.engine.core.bll.network.host.SetupNetworksCommand]
> (ajp--127.0.0.1-8702-10) [7289062c] Command
> org.ovirt.engine.core.bll.network.host.SetupNetworksCommand throw
> Vdc
> Bll exception. With error message VdcBLLException:
> org.ovirt.engine.core.vdsbroker.vdsbroker.VDSNetworkException:
> VDSGenericException: VDSNetworkException: Specified netmask or
> gateway
> but not ip
>
>
> Why does this happen on None Bootproto or DHCP ?
>
>
> 2013/2/12 Moti Asayag <masayag(a)redhat.com
> <mailto:masayag@redhat.com>>
>
> On 02/11/2013 12:37 PM, Matt . wrote:
> > I'm struggeling setting up my network in oVirt at the moment
> > as I
> would
> > like to seperate specific VM's from other devices/clients in
> > my
> network.
> >
>
> You should define the 'logical networks' which describe the
> networks of
> your setup.
> See the response to Nicolas on this thread of the steps to
> achieve it.
> If wish to create a network dedicated to storage which
> shouldn't allow
> VMs to use it, it should be defined as non-vm network.
> Once the network is assigned to a cluster, you can add new
> network
> interface to your VMs which defines to which bridges (vm
> networks) they
> are connected: hence, segregating the VMs is done by the
> vlan-id of the
> bridge the VMs are connected to.
>
>
> > I have decent setup switching network using Vlans, this is
> > also
> the fact
> > for ovirt and the storage nodes where teh ports are seperated
> > between
> > storage and management.
> >
> > Because I want to manage which client can acces which VM I
> > need Vlan
> > tagging. The question is where are we going to do this, on
> > the VM
> itself
> > or on the network I attach the VM's Nic to.
> >
> > Because of the lacking documentation at this point it's not
> > clear,
> so I
> > would like to figure out and maybe change the wiki there.
> >
> > I also cannot understand why I can set an IP to a network and
> > only the
> > subnet where I also can set DHCP which puts also the gateway.
> >
>
> The default gateway can be provided for the management network
> only. You
> can define its IP address either as static by providing its
> known IP
> address or letting it determine the address from the DHCP
> server.
> You cannot select 'None' as boot-protocol for the management
> network
> since then the engine will not be able to communicate with the
> host.
>
> However you can select 'none' boot-protocol to any other
> networks if
> wishes.
>
> > I'm not able to set None or DHCP and can only add a network
> > with
> IP, but
> > what IP and why ? Or just a 192.16.x.0 with a 255.255.255.0
> > subnet ?
> >
> > I hope someone can clear this a little bit more out.
> >
>
>
>
> > Thanks!
> >
> >
> > _______________________________________________
> > Users mailing list
> > Users(a)ovirt.org <mailto:Users@ovirt.org>
> > http://lists.ovirt.org/mailman/listinfo/users
> >
>
>
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
11:01 a.m.
Le 12/02/2013 22:43, Moti Asayag a écrit :
On 02/11/2013 12:37 PM, Matt . wrote:
> I'm struggeling setting up my network in oVirt at the moment as I would
> like to seperate specific VM's from other devices/clients in my network.
>
You should define the 'logical networks' which describe the networks of
your setup.
See the response to Nicolas on this thread of the steps to achieve it.
Thank you to Moti, Pavel and Mike ho took time to answer to Matt and me.
This also explained to me a lot about what can be done and how, and it
clearly forecasts a future very nice setup I'll work on.
Thank you.
--
Nicolas Ecarnot
12:12 p.m.
Thanks indeed, I'm with Nicolas, also working on a nice setup with this
information!
Here is some more logging:
The error came after I added WAN_02_02 with no IP.
2013-02-13 10:55:00,455 INFO
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(QuartzScheduler_Worker-9) [41071339] No string for VDS_ACTIVATE_ASYNC
type. Use default Log
2013-02-13 10:55:00,456 INFO
[org.ovirt.engine.core.bll.AutoRecoveryManager] (QuartzScheduler_Worker-9)
[41071339] Autorecovering 0 storage domains
2013-02-13 10:59:05,376 INFO
[org.ovirt.engine.core.bll.LoginAdminUserCommand] (ajp--127.0.0.1-8702-10)
Running command: LoginAdminUserCommand internal: false.
2013-02-13 10:59:06,266 ERROR [org.ovirt.engine.core.utils.ServletUtils]
(ajp--127.0.0.1-8702-5) Can't read file
"/usr/share/ovirt-engine/docs/DocumentationPath.csv" for request
"/docs/DocumentationPath.csv", will send a 404 error response.
2013-02-13 10:59:43,948 INFO
[org.ovirt.engine.core.bll.network.host.SetupNetworksCommand]
(ajp--127.0.0.1-8702-19) [683f2e62] Running command: SetupNetworksCommand
internal: false. Entities affected : ID:
033febb8-4f52-4253-bb6d-a8807816affd Type: VDS
2013-02-13 10:59:43,951 INFO
[org.ovirt.engine.core.vdsbroker.vdsbroker.SetupNetworksVDSCommand]
(ajp--127.0.0.1-8702-19) [683f2e62] START, SetupNetworksVDSCommand(HostName
= KVM-02, HostId = 033febb8-4f52-4253-bb6d-a8807816affd, force=false,
checkConnectivity=true, conectivityTimeout=120,
networks=[WAN_02_02 {id=6f38699a-3dea-4a96-987e-035e4041afdf,
description=null, subnet=null, gateway=null, type=null, vlanId=null,
stp=false, dataCenterId=56272dcf-0a66-489d-9a1e-4a1965207b64, mtu=0,
vmNetwork=false, cluster=NetworkCluster {id={clusterId=null,
networkId=null}, status=OPERATIONAL, display=false, required=true}}],
bonds=[],
interfaces=[eth3 {id=3b31007b-a0f5-472b-8906-9170ea00be96,
vdsId=033febb8-4f52-4253-bb6d-a8807816affd, name=eth3,
macAddress=00:1c:c4:d8:cb:34, networkName=officevms, bondName=null,
bootProtocol=STATIC_IP, address=172.16.20.0, subnet=255.255.255.0,
gateway=null, mtu=1500, bridged=true, speed=1000, type=0,
networkImplementationDetails={inSync=true, managed=true}},
eth1 {id=4760e6c8-73d0-41c3-9a39-1ebc48e08879,
vdsId=033febb8-4f52-4253-bb6d-a8807816affd, name=eth1,
macAddress=00:1f:29:5a:5a:b5, networkName=vmstorage, bondName=null,
bootProtocol=STATIC_IP, address=172.16.12.20, subnet=255.255.255.0,
gateway=null, mtu=1500, bridged=true, speed=1000, type=0,
networkImplementationDetails={inSync=true, managed=true}},
eth2 {id=713f2687-6d84-4010-9076-fbfc67cf6831,
vdsId=033febb8-4f52-4253-bb6d-a8807816affd, name=eth2,
macAddress=00:1c:c4:d8:cb:36, networkName=WAN_02_02, bondName=null,
bootProtocol=NONE, address=, subnet=, gateway=null, mtu=0, bridged=false,
speed=1000, type=0, networkImplementationDetails=null},
eth0 {id=1d3c9fef-8f9f-4f32-96c0-11c39f6c2e89,
vdsId=033febb8-4f52-4253-bb6d-a8807816affd, name=eth0,
macAddress=00:1f:29:5a:5a:b4, networkName=ovirtmgmt, bondName=null,
bootProtocol=STATIC_IP, address=172.16.8.20, subnet=255.255.255.0,
gateway=172.16.8.254, mtu=1500, bridged=true, speed=1000, type=2,
networkImplementationDetails={inSync=true, managed=true}}],
removedNetworks=[],
removedBonds=[]), log id: 1ff9ba0e
2013-02-13 10:59:43,960 INFO
[org.ovirt.engine.core.vdsbroker.vdsbroker.SetupNetworksVDSCommand]
(ajp--127.0.0.1-8702-19) [683f2e62] FINISH, SetupNetworksVDSCommand, log
id: 1ff9ba0e
2013-02-13 10:59:44,975 ERROR
[org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase]
(ajp--127.0.0.1-8702-19) [683f2e62]
org.ovirt.engine.core.vdsbroker.vdsbroker.VDSNetworkException:
VDSGenericException: VDSNetworkException: Specified netmask or gateway but
not ip
2013-02-13 10:59:44,976 ERROR
[org.ovirt.engine.core.vdsbroker.VDSCommandBase] (ajp--127.0.0.1-8702-19)
[683f2e62] Command SetupNetworksVDS execution failed. Exception:
VDSNetworkException: VDSGenericException: VDSNetworkException: Specified
netmask or gateway but not ip
2013-02-13 10:59:44,977 ERROR
[org.ovirt.engine.core.bll.network.host.SetupNetworksCommand]
(ajp--127.0.0.1-8702-19) [683f2e62] Command
org.ovirt.engine.core.bll.network.host.SetupNetworksCommand throw Vdc Bll
exception. With error message VdcBLLException:
org.ovirt.engine.core.vdsbroker.vdsbroker.VDSNetworkException:
VDSGenericException: VDSNetworkException: Specified netmask or gateway but
not ip
2013-02-13 11:00:00,002 INFO
[org.ovirt.engine.core.bll.AutoRecoveryManager] (QuartzScheduler_Worker-3)
[33d15439] Autorecovering 1 hosts
2013-02-13 11:00:00,002 INFO
[org.ovirt.engine.core.bll.AutoRecoveryManager] (QuartzScheduler_Worker-3)
[33d15439] Autorecovering hosts id: 033febb8-4f52-4253-bb6d-a8807816affd,
name : KVM-02
2013-02-13 11:00:00,005 INFO
[org.ovirt.engine.core.bll.ActivateVdsCommand] (QuartzScheduler_Worker-3)
[195b25c6] Lock Acquired to object EngineLock [exclusiveLocks= key:
033febb8-4f52-4253-bb6d-a8807816affd value: VDS
, sharedLocks= ]
2013-02-13 11:00:00,006 INFO
[org.ovirt.engine.core.bll.ActivateVdsCommand] (QuartzScheduler_Worker-3)
[195b25c6] Running command: ActivateVdsCommand internal: true. Entities
affected : ID: 033febb8-4f52-4253-bb6d-a8807816affd Type: VDS
2013-02-13 11:00:00,011 INFO
[org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand]
(QuartzScheduler_Worker-3) [195b25c6] START,
SetVdsStatusVDSCommand(HostName = KVM-02, HostId =
033febb8-4f52-4253-bb6d-a8807816affd, status=Unassigned,
nonOperationalReason=NONE), log id: 153fb58f
2013-02-13 11:00:00,013 INFO
[org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand]
(QuartzScheduler_Worker-3) [195b25c6] FINISH, SetVdsStatusVDSCommand, log
id: 153fb58f
2013-02-13 11:00:00,052 INFO
[org.ovirt.engine.core.vdsbroker.ActivateVdsVDSCommand]
(QuartzScheduler_Worker-3) [195b25c6] START, ActivateVdsVDSCommand(HostName
= KVM-02, HostId = 033febb8-4f52-4253-bb6d-a8807816affd), log id: 3f784d25
2013-02-13 11:00:00,176 INFO
[org.ovirt.engine.core.vdsbroker.vdsbroker.GetHardwareInfoVDSCommand]
(QuartzScheduler_Worker-3) [195b25c6] START,
GetHardwareInfoVDSCommand(HostName = KVM-02, HostId =
033febb8-4f52-4253-bb6d-a8807816affd, vds=Host[KVM-02]), log id: 14007e9c
2013-02-13 11:00:00,182 INFO
[org.ovirt.engine.core.vdsbroker.vdsbroker.GetHardwareInfoVDSCommand]
(QuartzScheduler_Worker-3) [195b25c6] FINISH, GetHardwareInfoVDSCommand,
log id: 14007e9c
2013-02-13 11:00:00,316 INFO
[org.ovirt.engine.core.bll.SetNonOperationalVdsCommand]
(QuartzScheduler_Worker-3) [371c6227] Running command:
SetNonOperationalVdsCommand internal: true. Entities affected : ID:
033febb8-4f52-4253-bb6d-a8807816affd Type: VDS
2013-02-13 11:00:00,319 INFO
[org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand]
(QuartzScheduler_Worker-3) [371c6227] START,
SetVdsStatusVDSCommand(HostName = KVM-02, HostId =
033febb8-4f52-4253-bb6d-a8807816affd, status=NonOperational,
nonOperationalReason=NETWORK_UNREACHABLE), log id: 62bc0d10
2013-02-13 11:00:00,321 INFO
[org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand]
(QuartzScheduler_Worker-3) [371c6227] FINISH, SetVdsStatusVDSCommand, log
id: 62bc0d10
2013-02-13 11:00:00,322 ERROR
[org.ovirt.engine.core.bll.SetNonOperationalVdsCommand]
(QuartzScheduler_Worker-3) [371c6227] Host KVM-02 is set to
Non-Operational, it is missing the following networks: devvms,WAN_02_02
2013-02-13 11:00:00,377 INFO
[org.ovirt.engine.core.bll.HandleVdsCpuFlagsOrClusterChangedCommand]
(QuartzScheduler_Worker-3) [3101152] Running command:
HandleVdsCpuFlagsOrClusterChangedCommand internal: true. Entities affected
: ID: 033febb8-4f52-4253-bb6d-a8807816affd Type: VDS
2013-02-13 11:00:00,382 INFO
[org.ovirt.engine.core.bll.HandleVdsVersionCommand]
(QuartzScheduler_Worker-3) [657f5a74] Running command:
HandleVdsVersionCommand internal: true. Entities affected : ID:
033febb8-4f52-4253-bb6d-a8807816affd Type: VDS
2013-02-13 11:00:00,388 INFO
[org.ovirt.engine.core.vdsbroker.ActivateVdsVDSCommand]
(QuartzScheduler_Worker-3) [657f5a74] FINISH, ActivateVdsVDSCommand, log
id: 3f784d25
2013-02-13 11:00:00,392 WARN
[org.ovirt.engine.core.bll.InternalMigrateVmCommand] (pool-3-thread-46)
CanDoAction of action InternalMigrateVm failed.
Reasons:ACTION_TYPE_FAILED_VM_IS_NON_MIGRTABLE
2013-02-13 11:00:00,393 ERROR
[org.ovirt.engine.core.bll.SetNonOperationalVdsCommand] (pool-3-thread-46)
ResourceManager::vdsMaintenance - Failed migrating desktop
crm-int.office.msp.cullie.local
2013-02-13 11:00:00,458 INFO
[org.ovirt.engine.core.bll.ActivateVdsCommand] (QuartzScheduler_Worker-3)
[657f5a74] Lock freed to object EngineLock [exclusiveLocks= key:
033febb8-4f52-4253-bb6d-a8807816affd value: VDS
, sharedLocks= ]
2013-02-13 11:00:00,460 INFO
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(QuartzScheduler_Worker-3) [657f5a74] No string for VDS_ACTIVATE_ASYNC
type. Use default Log
2013-02-13 11:00:00,462 INFO
[org.ovirt.engine.core.bll.AutoRecoveryManager] (QuartzScheduler_Worker-3)
[657f5a74] Autorecovering 0 storage domains
2013/2/13 Nicolas Ecarnot <nicolas(a)ecarnot.net>
Le 12/02/2013 22:43, Moti Asayag a écrit :
On 02/11/2013 12:37 PM, Matt . wrote:
>
>> I'm struggeling setting up my network in oVirt at the moment as I would
>> like to seperate specific VM's from other devices/clients in my network.
>>
>>
> You should define the 'logical networks' which describe the networks of
> your setup.
> See the response to Nicolas on this thread of the steps to achieve it.
>
Thank you to Moti, Pavel and Mike ho took time to answer to Matt and me.
This also explained to me a lot about what can be done and how, and it
clearly forecasts a future very nice setup I'll work on.
Thank you.
--
Nicolas Ecarnot
______________________________**_________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/**mailman/listinfo/users<http://lists.ovirt.org...
10:15 a.m.
Looks like that vdsm parses null value in the gateway=null as "True" and raise
Exception.
Can you raise a bugreport?
--
Best regards, Pavel Zhukov
mailto:pzhukov@redhat.com
On Wed, 13 Feb 2013, Matt . wrote:
| Thanks indeed, I'm with Nicolas, also working on a nice setup with this
| information!
|
| Here is some more logging:
|
| The error came after I added WAN_02_02 with no IP.
|
| 2013-02-13 10:55:00,455 INFO
| [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
| (QuartzScheduler_Worker-9) [41071339] No string for VDS_ACTIVATE_ASYNC type.
| Use default Log
| 2013-02-13 10:55:00,456 INFO [org.ovirt.engine.core.bll.AutoRecoveryManager]
| (QuartzScheduler_Worker-9) [41071339] Autorecovering 0 storage domains
| 2013-02-13 10:59:05,376 INFO [org.ovirt.engine.core.bll.LoginAdminUserCommand]
| (ajp--127.0.0.1-8702-10) Running command: LoginAdminUserCommand internal:
| false.
| 2013-02-13 10:59:06,266 ERROR [org.ovirt.engine.core.utils.ServletUtils]
| (ajp--127.0.0.1-8702-5) Can't read file "/usr/share/ovirt-engine/docs/
| DocumentationPath.csv" for request "/docs/DocumentationPath.csv", will
send a
| 404 error response.
| 2013-02-13 10:59:43,948 INFO
| [org.ovirt.engine.core.bll.network.host.SetupNetworksCommand]
| (ajp--127.0.0.1-8702-19) [683f2e62] Running command: SetupNetworksCommand
| internal: false. Entities affected : ID: 033febb8-4f52-4253-bb6d-a8807816affd
| Type: VDS
| 2013-02-13 10:59:43,951 INFO
| [org.ovirt.engine.core.vdsbroker.vdsbroker.SetupNetworksVDSCommand]
| (ajp--127.0.0.1-8702-19) [683f2e62] START, SetupNetworksVDSCommand(HostName =
| KVM-02, HostId = 033febb8-4f52-4253-bb6d-a8807816affd, force=false,
| checkConnectivity=true, conectivityTimeout=120,
| networks=[WAN_02_02 {id=6f38699a-3dea-4a96-987e-035e4041afdf, description=
| null, subnet=null, gateway=null, type=null, vlanId=null, stp=false,
| dataCenterId=56272dcf-0a66-489d-9a1e-4a1965207b64, mtu=0, vmNetwork=false,
| cluster=NetworkCluster {id={clusterId=null, networkId=null}, status=
| OPERATIONAL, display=false, required=true}}],
| bonds=[],
| interfaces=[eth3 {id=3b31007b-a0f5-472b-8906-9170ea00be96, vdsId=
| 033febb8-4f52-4253-bb6d-a8807816affd, name=eth3, macAddress=00:1c:c4:d8:cb:34,
| networkName=officevms, bondName=null, bootProtocol=STATIC_IP, address=
| 172.16.20.0, subnet=255.255.255.0, gateway=null, mtu=1500, bridged=true, speed=
| 1000, type=0, networkImplementationDetails={inSync=true, managed=true}},
| eth1 {id=4760e6c8-73d0-41c3-9a39-1ebc48e08879, vdsId=
| 033febb8-4f52-4253-bb6d-a8807816affd, name=eth1, macAddress=00:1f:29:5a:5a:b5,
| networkName=vmstorage, bondName=null, bootProtocol=STATIC_IP, address=
| 172.16.12.20, subnet=255.255.255.0, gateway=null, mtu=1500, bridged=true, speed
| =1000, type=0, networkImplementationDetails={inSync=true, managed=true}},
| eth2 {id=713f2687-6d84-4010-9076-fbfc67cf6831, vdsId=
| 033febb8-4f52-4253-bb6d-a8807816affd, name=eth2, macAddress=00:1c:c4:d8:cb:36,
| networkName=WAN_02_02, bondName=null, bootProtocol=NONE, address=, subnet=,
| gateway=null, mtu=0, bridged=false, speed=1000, type=0,
| networkImplementationDetails=null},
| eth0 {id=1d3c9fef-8f9f-4f32-96c0-11c39f6c2e89, vdsId=
| 033febb8-4f52-4253-bb6d-a8807816affd, name=eth0, macAddress=00:1f:29:5a:5a:b4,
| networkName=ovirtmgmt, bondName=null, bootProtocol=STATIC_IP, address=
| 172.16.8.20, subnet=255.255.255.0, gateway=172.16.8.254, mtu=1500, bridged=
| true, speed=1000, type=2, networkImplementationDetails={inSync=true, managed=
| true}}],
| removedNetworks=[],
| removedBonds=[]), log id: 1ff9ba0e
| 2013-02-13 10:59:43,960 INFO
| [org.ovirt.engine.core.vdsbroker.vdsbroker.SetupNetworksVDSCommand]
| (ajp--127.0.0.1-8702-19) [683f2e62] FINISH, SetupNetworksVDSCommand, log id:
| 1ff9ba0e
| 2013-02-13 10:59:44,975 ERROR
| [org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase]
| (ajp--127.0.0.1-8702-19) [683f2e62]
| org.ovirt.engine.core.vdsbroker.vdsbroker.VDSNetworkException:
| VDSGenericException: VDSNetworkException: Specified netmask or gateway but not
| ip
| 2013-02-13 10:59:44,976 ERROR [org.ovirt.engine.core.vdsbroker.VDSCommandBase]
| (ajp--127.0.0.1-8702-19) [683f2e62] Command SetupNetworksVDS execution failed.
| Exception: VDSNetworkException: VDSGenericException: VDSNetworkException:
| Specified netmask or gateway but not ip
| 2013-02-13 10:59:44,977 ERROR
| [org.ovirt.engine.core.bll.network.host.SetupNetworksCommand]
| (ajp--127.0.0.1-8702-19) [683f2e62] Command
| org.ovirt.engine.core.bll.network.host.SetupNetworksCommand throw Vdc Bll
| exception. With error message VdcBLLException:
| org.ovirt.engine.core.vdsbroker.vdsbroker.VDSNetworkException:
| VDSGenericException: VDSNetworkException: Specified netmask or gateway but not
| ip
| 2013-02-13 11:00:00,002 INFO [org.ovirt.engine.core.bll.AutoRecoveryManager]
| (QuartzScheduler_Worker-3) [33d15439] Autorecovering 1 hosts
| 2013-02-13 11:00:00,002 INFO [org.ovirt.engine.core.bll.AutoRecoveryManager]
| (QuartzScheduler_Worker-3) [33d15439] Autorecovering hosts id:
| 033febb8-4f52-4253-bb6d-a8807816affd, name : KVM-02
| 2013-02-13 11:00:00,005 INFO [org.ovirt.engine.core.bll.ActivateVdsCommand]
| (QuartzScheduler_Worker-3) [195b25c6] Lock Acquired to object EngineLock
| [exclusiveLocks= key: 033febb8-4f52-4253-bb6d-a8807816affd value: VDS
| , sharedLocks= ]
| 2013-02-13 11:00:00,006 INFO [org.ovirt.engine.core.bll.ActivateVdsCommand]
| (QuartzScheduler_Worker-3) [195b25c6] Running command: ActivateVdsCommand
| internal: true. Entities affected : ID: 033febb8-4f52-4253-bb6d-a8807816affd
| Type: VDS
| 2013-02-13 11:00:00,011 INFO
| [org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand]
| (QuartzScheduler_Worker-3) [195b25c6] START, SetVdsStatusVDSCommand(HostName =
| KVM-02, HostId = 033febb8-4f52-4253-bb6d-a8807816affd, status=Unassigned,
| nonOperationalReason=NONE), log id: 153fb58f
| 2013-02-13 11:00:00,013 INFO
| [org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand]
| (QuartzScheduler_Worker-3) [195b25c6] FINISH, SetVdsStatusVDSCommand, log id:
| 153fb58f
| 2013-02-13 11:00:00,052 INFO
| [org.ovirt.engine.core.vdsbroker.ActivateVdsVDSCommand]
| (QuartzScheduler_Worker-3) [195b25c6] START, ActivateVdsVDSCommand(HostName =
| KVM-02, HostId = 033febb8-4f52-4253-bb6d-a8807816affd), log id: 3f784d25
| 2013-02-13 11:00:00,176 INFO
| [org.ovirt.engine.core.vdsbroker.vdsbroker.GetHardwareInfoVDSCommand]
| (QuartzScheduler_Worker-3) [195b25c6] START, GetHardwareInfoVDSCommand(HostName
| = KVM-02, HostId = 033febb8-4f52-4253-bb6d-a8807816affd, vds=Host[KVM-02]), log
| id: 14007e9c
| 2013-02-13 11:00:00,182 INFO
| [org.ovirt.engine.core.vdsbroker.vdsbroker.GetHardwareInfoVDSCommand]
| (QuartzScheduler_Worker-3) [195b25c6] FINISH, GetHardwareInfoVDSCommand, log
| id: 14007e9c
| 2013-02-13 11:00:00,316 INFO
| [org.ovirt.engine.core.bll.SetNonOperationalVdsCommand]
| (QuartzScheduler_Worker-3) [371c6227] Running command:
| SetNonOperationalVdsCommand internal: true. Entities affected : ID:
| 033febb8-4f52-4253-bb6d-a8807816affd Type: VDS
| 2013-02-13 11:00:00,319 INFO
| [org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand]
| (QuartzScheduler_Worker-3) [371c6227] START, SetVdsStatusVDSCommand(HostName =
| KVM-02, HostId = 033febb8-4f52-4253-bb6d-a8807816affd, status=NonOperational,
| nonOperationalReason=NETWORK_UNREACHABLE), log id: 62bc0d10
| 2013-02-13 11:00:00,321 INFO
| [org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand]
| (QuartzScheduler_Worker-3) [371c6227] FINISH, SetVdsStatusVDSCommand, log id:
| 62bc0d10
| 2013-02-13 11:00:00,322 ERROR
| [org.ovirt.engine.core.bll.SetNonOperationalVdsCommand]
| (QuartzScheduler_Worker-3) [371c6227] Host KVM-02 is set to Non-Operational, it
| is missing the following networks: devvms,WAN_02_02
| 2013-02-13 11:00:00,377 INFO
| [org.ovirt.engine.core.bll.HandleVdsCpuFlagsOrClusterChangedCommand]
| (QuartzScheduler_Worker-3) [3101152] Running command:
| HandleVdsCpuFlagsOrClusterChangedCommand internal: true. Entities affected :
| ID: 033febb8-4f52-4253-bb6d-a8807816affd Type: VDS
| 2013-02-13 11:00:00,382 INFO
| [org.ovirt.engine.core.bll.HandleVdsVersionCommand] (QuartzScheduler_Worker-3)
| [657f5a74] Running command: HandleVdsVersionCommand internal: true. Entities
| affected : ID: 033febb8-4f52-4253-bb6d-a8807816affd Type: VDS
| 2013-02-13 11:00:00,388 INFO
| [org.ovirt.engine.core.vdsbroker.ActivateVdsVDSCommand]
| (QuartzScheduler_Worker-3) [657f5a74] FINISH, ActivateVdsVDSCommand, log id:
| 3f784d25
| 2013-02-13 11:00:00,392 WARN
| [org.ovirt.engine.core.bll.InternalMigrateVmCommand] (pool-3-thread-46)
| CanDoAction of action InternalMigrateVm failed.
| Reasons:ACTION_TYPE_FAILED_VM_IS_NON_MIGRTABLE
| 2013-02-13 11:00:00,393 ERROR
| [org.ovirt.engine.core.bll.SetNonOperationalVdsCommand] (pool-3-thread-46)
| ResourceManager::vdsMaintenance - Failed migrating desktop
| crm-int.office.msp.cullie.local
| 2013-02-13 11:00:00,458 INFO [org.ovirt.engine.core.bll.ActivateVdsCommand]
| (QuartzScheduler_Worker-3) [657f5a74] Lock freed to object EngineLock
| [exclusiveLocks= key: 033febb8-4f52-4253-bb6d-a8807816affd value: VDS
| , sharedLocks= ]
| 2013-02-13 11:00:00,460 INFO
| [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
| (QuartzScheduler_Worker-3) [657f5a74] No string for VDS_ACTIVATE_ASYNC type.
| Use default Log
| 2013-02-13 11:00:00,462 INFO [org.ovirt.engine.core.bll.AutoRecoveryManager]
| (QuartzScheduler_Worker-3) [657f5a74] Autorecovering 0 storage domains
|
|
| 2013/2/13 Nicolas Ecarnot <nicolas(a)ecarnot.net>
|
| Le 12/02/2013 22:43, Moti Asayag a écrit :
|
|
| On 02/11/2013 12:37 PM, Matt . wrote:
|
| I'm struggeling setting up my network in oVirt at the moment as I
| would
| like to seperate specific VM's from other devices/clients in my
| network.
|
|
|
| You should define the 'logical networks' which describe the networks of
| your setup.
| See the response to Nicolas on this thread of the steps to achieve it.
|
|
| Thank you to Moti, Pavel and Mike ho took time to answer to Matt and me.
| This also explained to me a lot about what can be done and how, and it
| clearly forecasts a future very nice setup I'll work on.
|
| Thank you.
|
| --
| Nicolas Ecarnot
|
| _______________________________________________
| Users mailing list
| Users(a)ovirt.org
| http://lists.ovirt.org/mailman/listinfo/users
|
|
| _______________________________________________
| Users mailing list
| Users(a)ovirt.org
| http://lists.ovirt.org/mailman/listinfo/users
12:15 p.m.
------=_Part_1629271_1077479170.1360836918613
Content-Type: text/plain; charset=utf-8
Content-Transfer-Encoding: quoted-printable
----- Original Message -----
2013-02-13 10:55:00,455
INFO [org.ovirt.engine.core.dal.dbbroker.audi=
tloghandling.AuditLogDirector] (QuartzScheduler_Worker-9) [41071339] No str=
ing for VDS_ACTIVATE_ASYNC type. Use default Log<br>2013-02-13 10:55:00,456=
INFO [org.ovirt.engine.core.bll.AutoRecoveryManager] (QuartzSchedule=
r_Worker-9) [41071339] Autorecovering 0 storage domains<br
2013-02-13 10:59:05,376 INFO [org.ovirt.engine.core.bll.LoginAdminUse=
rCommand] (ajp--127.0.0.1-8702-10) Running command: LoginAdminUserCommand i=
nternal: false.<br>2013-02-13 10:59:06,266 ERROR [org.ovirt.engine.core.uti=
ls.ServletUtils] (ajp--127.0.0.1-8702-5) Can't read file "/usr/share/ovirt-=
engine/docs/DocumentationPath.csv" for request "/docs/DocumentationPath.csv=
", will send a 404 error response.<br
2013-02-13 10:59:43,948 INFO [org.ovirt.engine.core.bll.network.host.=
SetupNetworksCommand] (ajp--127.0.0.1-8702-19) [683f2e62] Running command: =
SetupNetworksCommand internal: false. Entities affected : ID: 033febb=
8-4f52-4253-bb6d-a8807816affd Type: VDS<br
2013-02-13 10:59:43,951 INFO [org.ovirt.engine.core.vdsbroker.vdsbrok=
er.SetupNetworksVDSCommand] (ajp--127.0.0.1-8702-19) [683f2e62] START, Setu=
pNetworksVDSCommand(HostName =3D KVM-02, HostId =3D 033febb8-4f52-4253-bb6d=
-a8807816affd, force=3Dfalse, checkConnectivity=3Dtrue, conectivityTimeout=
=3D120,<br
networks=3D[WAN_02_02 {id=3D6f38699a-3dea-4a96-987e-035e=
4041afdf, description=3Dnull, subnet=3Dnull, gateway=3Dnull, type=3Dnull, v=
lanId=3Dnull, stp=3Dfalse, dataCenterId=3D56272dcf-0a66-489d-9a1e-4a1965207=
b64, mtu=3D0, vmNetwork=3Dfalse, cluster=3DNetworkCluster {id=3D{clusterId=
=3Dnull, networkId=3Dnull}, status=3DOPERATIONAL, display=3Dfalse, required=
=3Dtrue}}],<br
bonds=3D[],<br> interfaces=3D[eth3 {id=
=3D3b31007b-a0f5-472b-8906-9170ea00be96, vdsId=3D033febb8-4f52-4253-bb6d-a8=
807816affd, name=3Deth3, macAddress=3D00:1c:c4:d8:cb:34, networkName=3Doffi=
cevms, bondName=3Dnull, bootProtocol=3DSTATIC_IP, address=3D172.16.20.0, su=
bnet=3D255.255.255.0, gateway=3Dnull, mtu=3D1500, bridged=3Dtrue, speed=3D1=
000, type=3D0, networkImplementationDetails=3D{inSync=3Dtrue, managed=3Dtru=
e}},<br
eth1 {id=3D4760e6c8-73d0-41c3-9a39-1e=
bc48e08879, vdsId=3D033febb8-4f52-4253-bb6d-a8807816affd, name=3Deth1, macA=
ddress=3D00:1f:29:5a:5a:b5, networkName=3Dvmstorage, bondName=3Dnull, bootP=
rotocol=3DSTATIC_IP, address=3D172.16.12.20, subnet=3D255.255.255.0, gatewa=
y=3Dnull, mtu=3D1500, bridged=3Dtrue, speed=3D1000, type=3D0, networkImplem=
entationDetails=3D{inSync=3Dtrue, managed=3Dtrue}},<br
eth2
{id=3D713f2687-6d84-4010-9076-fb=
fc67cf6831, vdsId=3D033febb8-4f52-4253-bb6d-a8807816affd, name=3Deth2, macA=
ddress=3D00:1c:c4:d8:cb:36, networkName=3DWAN_02_02, bondName=3Dnull, bootP=
rotocol=3DNONE, address=3D, subnet=3D, gateway=3Dnull, mtu=3D0, bridged=3Df=
alse, speed=3D1000, type=3D0, networkImplementationDetails=3Dnull},<br
eth0 {id=3D1d3c9fef-8f9f-4f32-96c0-11=
c39f6c2e89, vdsId=3D033febb8-4f52-4253-bb6d-a8807816affd, name=3Deth0, macA=
ddress=3D00:1f:29:5a:5a:b4, networkName=3Dovirtmgmt, bondName=3Dnull, bootP=
rotocol=3DSTATIC_IP, address=3D172.16.8.20, subnet=3D255.255.255.0, gateway=
=3D172.16.8.254, mtu=3D1500, bridged=3Dtrue, speed=3D1000, type=3D2, networ=
kImplementationDetails=3D{inSync=3Dtrue, managed=3Dtrue}}],<br
removedNetworks=3D[],<br> removedBonds=
=3D[]), log id: 1ff9ba0e<br>2013-02-13 10:59:43,960 INFO [org.ovirt.e=
ngine.core.vdsbroker.vdsbroker.SetupNetworksVDSCommand] (ajp--127.0.0.1-870=
2-19) [683f2e62] FINISH, SetupNetworksVDSCommand, log id: 1ff9ba0e<br 2013-02-13 10:59:44,975 ERROR
[org.ovirt.engine.core.vdsbroker.vdsbroker.Br=
okerCommandBase] (ajp--127.0.0.1-8702-19) [683f2e62] org.ovirt.engine.core.=
vdsbroker.vdsbroker.VDSNetworkException: VDSGenericException: VDSNetworkExc=
eption: Specified netmask or gateway but not ip<br
2013-02-13 10:59:44,976 ERROR [org.ovirt.engine.core.vdsbroker.VDSCommandBa=
se] (ajp--127.0.0.1-8702-19) [683f2e62] Command SetupNetworksVDS execution =
failed. Exception: VDSNetworkException: VDSGenericException: VDSNetworkExce=
ption: Specified netmask or gateway but not ip<br
2013-02-13 10:59:44,977 ERROR [org.ovirt.engine.core.bll.network.host.Setup=
NetworksCommand] (ajp--127.0.0.1-8702-19) [683f2e62] Command org.ovirt.engi=
ne.core.bll.network.host.SetupNetworksCommand throw Vdc Bll exception. With=
error message VdcBLLException: org.ovirt.engine.core.vdsbroker.vdsbroker.V=
DSNetworkException: VDSGenericException: VDSNetworkException: Specified net=
mask or gateway but not ip<br 2013-02-13 11:00:00,002
INFO [org.ovirt.engine.core.bll.AutoRecoveryM=
anager] (QuartzScheduler_Worker-3) [33d15439] Autorecovering 1 hosts<br>201=
3-02-13 11:00:00,002 INFO [org.ovirt.engine.core.bll.AutoRecoveryMana=
ger] (QuartzScheduler_Worker-3) [33d15439] Autorecovering hosts id: 033febb=
8-4f52-4253-bb6d-a8807816affd, name : KVM-02<br
2013-02-13 11:00:00,005 INFO [org.ovirt.engine.core.bll.ActivateVdsCo=
mmand] (QuartzScheduler_Worker-3) [195b25c6] Lock Acquired to object Engine=
Lock [exclusiveLocks=3D key: 033febb8-4f52-4253-bb6d-a8807816affd value: VD=
S<br , sharedLocks=3D ]<br>2013-02-13 11:00:00,006
INFO [org.ovirt.engine.=
core.bll.ActivateVdsCommand] (QuartzScheduler_Worker-3) [195b25c6] Running =
command: ActivateVdsCommand internal: true. Entities affected : ID: 0=
33febb8-4f52-4253-bb6d-a8807816affd Type: VDS<br
2013-02-13 11:00:00,011 INFO [org.ovirt.engine.core.vdsbroker.SetVdsS=
tatusVDSCommand] (QuartzScheduler_Worker-3) [195b25c6] START, SetVdsStatusV=
DSCommand(HostName =3D KVM-02, HostId =3D 033febb8-4f52-4253-bb6d-a8807816a=
ffd, status=3DUnassigned, nonOperationalReason=3DNONE), log id: 153fb58f<br=
2013-02-13 11:00:00,013 INFO
[org.ovirt.engine.core.vdsbroker.SetVdsS=
tatusVDSCommand] (QuartzScheduler_Worker-3) [195b25c6] FINISH, SetVdsStatus=
VDSCommand, log id: 153fb58f<br>2013-02-13 11:00:00,052 INFO [org.ovi=
rt.engine.core.vdsbroker.ActivateVdsVDSCommand] (QuartzScheduler_Worker-3) =
[195b25c6] START, ActivateVdsVDSCommand(HostName =3D KVM-02, HostId =3D 033=
febb8-4f52-4253-bb6d-a8807816affd), log id: 3f784d25<br
2013-02-13 11:00:00,176 INFO [org.ovirt.engine.core.vdsbroker.vdsbrok=
er.GetHardwareInfoVDSCommand] (QuartzScheduler_Worker-3) [195b25c6] START, =
GetHardwareInfoVDSCommand(HostName =3D KVM-02, HostId =3D 033febb8-4f52-425=
3-bb6d-a8807816affd, vds=3DHost[KVM-02]), log id: 14007e9c<br 2013-02-13 11:00:00,182 INFO
[org.ovirt.engine.core.vdsbroker.vdsbrok=
er.GetHardwareInfoVDSCommand] (QuartzScheduler_Worker-3) [195b25c6] FINISH,=
GetHardwareInfoVDSCommand, log id: 14007e9c<br>2013-02-13 11:00:00,316 INF=
O [org.ovirt.engine.core.bll.SetNonOperationalVdsCommand] (QuartzSche=
duler_Worker-3) [371c6227] Running command: SetNonOperationalVdsCommand int=
ernal: true. Entities affected : ID: 033febb8-4f52-4253-bb6d-a8807816=
affd Type: VDS<br 2013-02-13 11:00:00,319
INFO [org.ovirt.engine.core.vdsbroker.SetVdsS=
tatusVDSCommand] (QuartzScheduler_Worker-3) [371c6227] START, SetVdsStatusV=
DSCommand(HostName =3D KVM-02, HostId =3D 033febb8-4f52-4253-bb6d-a8807816a=
ffd, status=3DNonOperational, nonOperationalReason=3DNETWORK_UNREACHABLE), =
log id: 62bc0d10<br 2013-02-13 11:00:00,321
INFO [org.ovirt.engine.core.vdsbroker.SetVdsS=
tatusVDSCommand] (QuartzScheduler_Worker-3) [371c6227] FINISH, SetVdsStatus=
VDSCommand, log id: 62bc0d10<br>2013-02-13 11:00:00,322 ERROR [org.ovirt.en=
gine.core.bll.SetNonOperationalVdsCommand] (QuartzScheduler_Worker-3) [371c=
6227] Host KVM-02 is set to Non-Operational, it is missing the following ne=
tworks: devvms,WAN_02_02<br 2013-02-13 11:00:00,377
INFO [org.ovirt.engine.core.bll.HandleVdsCpuF=
lagsOrClusterChangedCommand] (QuartzScheduler_Worker-3) [3101152] Running c=
ommand: HandleVdsCpuFlagsOrClusterChangedCommand internal: true. Entities a=
ffected : ID: 033febb8-4f52-4253-bb6d-a8807816affd Type: VDS<br 2013-02-13 11:00:00,382 INFO
[org.ovirt.engine.core.bll.HandleVdsVers=
ionCommand] (QuartzScheduler_Worker-3) [657f5a74] Running command: HandleVd=
sVersionCommand internal: true. Entities affected : ID: 033febb8-4f52=
-4253-bb6d-a8807816affd Type: VDS<br
2013-02-13 11:00:00,388 INFO [org.ovirt.engine.core.vdsbroker.Activat=
eVdsVDSCommand] (QuartzScheduler_Worker-3) [657f5a74] FINISH, ActivateVdsVD=
SCommand, log id: 3f784d25<br>2013-02-13 11:00:00,392 WARN [org.ovirt=
.engine.core.bll.InternalMigrateVmCommand] (pool-3-thread-46) CanDoAction o=
f action InternalMigrateVm failed. Reasons:ACTION_TYPE_FAILED_VM_IS_NON_MIG=
RTABLE<br 2013-02-13 11:00:00,393 ERROR
[org.ovirt.engine.core.bll.SetNonOperationalV=
dsCommand] (pool-3-thread-46) ResourceManager::vdsMaintenance - Failed migr=
ating desktop crm-int.office.msp.cullie.local<br>2013-02-13 11:00:00,458 IN=
FO [org.ovirt.engine.core.bll.ActivateVdsCommand] (QuartzScheduler_Wo=
rker-3) [657f5a74] Lock freed to object EngineLock [exclusiveLocks=3D key: =
033febb8-4f52-4253-bb6d-a8807816affd value: VDS<br ,
sharedLocks=3D ]<br>2013-02-13 11:00:00,460 INFO [org.ovirt.engine.=
core.dal.dbbroker.auditloghandling.AuditLogDirector] (QuartzScheduler_Worke=
r-3) [657f5a74] No string for VDS_ACTIVATE_ASYNC type. Use default Log<br>2=
013-02-13 11:00:00,462 INFO [org.ovirt.engine.core.bll.AutoRecoveryMa=
nager] (QuartzScheduler_Worker-3) [657f5a74] Autorecovering 0 storage domai=
ns<br </div><div
class=3D"gmail_extra"><br><br><div
class=3D"gmail_quote">2013/2/=
13 Nicolas Ecarnot <span dir=3D"ltr"><<a
href=3D"mailto:nicolas@ecarnot.=
net"
target=3D"_blank">nicolas(a)ecarnot.net</a>&gt;</span><br><blockquote
cl=
ass=3D"gmail_quote" style=3D"margin:0 0 0 .8ex;border-left:1px #ccc
solid;p=
adding-left:1ex" Le 12/02/2013 22:43, Moti Asayag a
=C3=A9crit :<div class=3D"im"><br
<blockquote class=3D"gmail_quote" style=3D"margin:0 0 0
.8ex;border-left:1p=
x #ccc solid;padding-left:1ex" On
02/11/2013 12:37 PM, Matt . wrote:<br
<blockquote class=3D"gmail_quote" style=3D"margin:0 0 0
.8ex;border-left:1p=
x #ccc solid;padding-left:1ex" I'm
struggeling setting up my network in oVirt at the moment as I would<br like to seperate specific VM's from other devices/clients
in my network.<br=
<br </blockquote <br You should define the 'logical
networks' which describe the networks of<br your
setup.<br See the response to Nicolas on this
thread of the steps to achieve it.<br
</blockquote <br></div Thank you to Moti, Pavel and Mike ho took time to answer to
Matt and me.<br=
This also explained to me a lot about what can be done and how,
and it clea=
rly forecasts a future very nice setup I'll work on.<br <br Thank you.<span
class=3D"HOEnZb"><font color=3D"#888888"><br <br -- <br Nicolas Ecarnot</font></span><div
class=3D"HOEnZb"><div class=3D"h5"><br
______________________________<u></u>_________________<br Users mailing list<br <a
href=3D"mailto:Users@ovirt.org"
target=3D"_blank">Users(a)ovirt.org</a><br=
<a
href=3D"http://lists.ovirt.org/mailman/listinfo/users"
target=3D"_blank"=
>http://lists.ovirt.org/<u></u>mailman/listinfo/users</a><br
</div></div></blockquote></div><br></div
<br>_______________________________________________<br>Users mailing
list<b=
r>Users@ovirt.org<br>http://lists.ovirt.org/mailman/listinfo/users<br></blo=
ckquote><br></div></body></html
------=_Part_1629271_1077479170.1360836918613--
Thanks indeed, I'm with Nicolas, also working on a nice setup
with
this information!
Here is some more logging:
Thanks for the log.=20
Unfortunately I can't tell much from it, can you please send a log of the s=
etup networks command from VDSM log, where it is possible to see the parame=
ters that have been sent to the command?=20
The error came after I added WAN_02_02 with no IP.
2013-02-13 10:55:00,455 INFO
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(QuartzScheduler_Worker-9) [41071339] No string for
VDS_ACTIVATE_ASYNC type. Use default Log
2013-02-13 10:55:00,456 INFO
[org.ovirt.engine.core.bll.AutoRecoveryManager]
(QuartzScheduler_Worker-9) [41071339] Autorecovering 0 storage
domains
2013-02-13 10:59:05,376 INFO
[org.ovirt.engine.core.bll.LoginAdminUserCommand]
(ajp--127.0.0.1-8702-10) Running command: LoginAdminUserCommand
internal: false.
2013-02-13 10:59:06,266 ERROR
[org.ovirt.engine.core.utils.ServletUtils] (ajp--127.0.0.1-8702-5)
Can't read file "/usr/share/ovirt-engine/docs/DocumentationPath.csv"
for request "/docs/DocumentationPath.csv", will send a 404 error
response.
2013-02-13 10:59:43,948 INFO
[org.ovirt.engine.core.bll.network.host.SetupNetworksCommand]
(ajp--127.0.0.1-8702-19) [683f2e62] Running command:
SetupNetworksCommand internal: false. Entities affected : ID:
033febb8-4f52-4253-bb6d-a8807816affd Type: VDS
2013-02-13 10:59:43,951 INFO
[org.ovirt.engine.core.vdsbroker.vdsbroker.SetupNetworksVDSCommand]
(ajp--127.0.0.1-8702-19) [683f2e62] START,
SetupNetworksVDSCommand(HostName =3D KVM-02, HostId =3D
033febb8-4f52-4253-bb6d-a8807816affd, force=3Dfalse,
checkConnectivity=3Dtrue, conectivityTimeout=3D120,
networks=3D[WAN_02_02 {id=3D6f38699a-3dea-4a96-987e-035e4041afdf,
description=3Dnull, subnet=3Dnull, gateway=3Dnull, type=3Dnull, vlanId=3D=
null,
stp=3Dfalse, dataCenterId=3D56272dcf-0a66-489d-9a1e-4a1965207b64,
mtu=3D0=
,
vmNetwork=3Dfalse, cluster=3DNetworkCluster {id=3D{clusterId=3Dnull,
networkId=3Dnull}, status=3DOPERATIONAL, display=3Dfalse,
required=3Dtrue}}],
bonds=3D[],
interfaces=3D[eth3 {id=3D3b31007b-a0f5-472b-8906-9170ea00be96,
vdsId=3D033febb8-4f52-4253-bb6d-a8807816affd, name=3Deth3,
macAddress=3D00:1c:c4:d8:cb:34, networkName=3Dofficevms, bondName=3Dnull,
bootProtocol=3DSTATIC_IP, address=3D172.16.20.0, subnet=3D255.255.255.0,
gateway=3Dnull, mtu=3D1500, bridged=3Dtrue, speed=3D1000, type=3D0,
networkImplementationDetails=3D{inSync=3Dtrue, managed=3Dtrue}},
eth1 {id=3D4760e6c8-73d0-41c3-9a39-1ebc48e08879,
vdsId=3D033febb8-4f52-4253-bb6d-a8807816affd, name=3Deth1,
macAddress=3D00:1f:29:5a:5a:b5, networkName=3Dvmstorage, bondName=3Dnull,
bootProtocol=3DSTATIC_IP, address=3D172.16.12.20, subnet=3D255.255.255.0,
gateway=3Dnull, mtu=3D1500, bridged=3Dtrue, speed=3D1000, type=3D0,
networkImplementationDetails=3D{inSync=3Dtrue, managed=3Dtrue}},
eth2 {id=3D713f2687-6d84-4010-9076-fbfc67cf6831,
vdsId=3D033febb8-4f52-4253-bb6d-a8807816affd, name=3Deth2,
macAddress=3D00:1c:c4:d8:cb:36, networkName=3DWAN_02_02, bondName=3Dnull,
bootProtocol=3DNONE, address=3D, subnet=3D, gateway=3Dnull, mtu=3D0,
bridged=3Dfalse, speed=3D1000, type=3D0,
networkImplementationDetails=3Dnull},
eth0 {id=3D1d3c9fef-8f9f-4f32-96c0-11c39f6c2e89,
vdsId=3D033febb8-4f52-4253-bb6d-a8807816affd, name=3Deth0,
macAddress=3D00:1f:29:5a:5a:b4, networkName=3Dovirtmgmt, bondName=3Dnull,
bootProtocol=3DSTATIC_IP, address=3D172.16.8.20, subnet=3D255.255.255.0,
gateway=3D172.16.8.254, mtu=3D1500, bridged=3Dtrue, speed=3D1000, type=3D=
2,
networkImplementationDetails=3D{inSync=3Dtrue, managed=3Dtrue}}],
removedNetworks=3D[],
removedBonds=3D[]), log id: 1ff9ba0e
2013-02-13 10:59:43,960 INFO
[org.ovirt.engine.core.vdsbroker.vdsbroker.SetupNetworksVDSCommand]
(ajp--127.0.0.1-8702-19) [683f2e62] FINISH, SetupNetworksVDSCommand,
log id: 1ff9ba0e
2013-02-13 10:59:44,975 ERROR
[org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase]
(ajp--127.0.0.1-8702-19) [683f2e62]
org.ovirt.engine.core.vdsbroker.vdsbroker.VDSNetworkException:
VDSGenericException: VDSNetworkException: Specified netmask or
gateway but not ip
2013-02-13 10:59:44,976 ERROR
[org.ovirt.engine.core.vdsbroker.VDSCommandBase]
(ajp--127.0.0.1-8702-19) [683f2e62] Command SetupNetworksVDS
execution failed. Exception: VDSNetworkException:
VDSGenericException: VDSNetworkException: Specified netmask or
gateway but not ip
2013-02-13 10:59:44,977 ERROR
[org.ovirt.engine.core.bll.network.host.SetupNetworksCommand]
(ajp--127.0.0.1-8702-19) [683f2e62] Command
org.ovirt.engine.core.bll.network.host.SetupNetworksCommand throw
Vdc Bll exception. With error message VdcBLLException:
org.ovirt.engine.core.vdsbroker.vdsbroker.VDSNetworkException:
VDSGenericException: VDSNetworkException: Specified netmask or
gateway but not ip
2013-02-13 11:00:00,002 INFO
[org.ovirt.engine.core.bll.AutoRecoveryManager]
(QuartzScheduler_Worker-3) [33d15439] Autorecovering 1 hosts
2013-02-13 11:00:00,002 INFO
[org.ovirt.engine.core.bll.AutoRecoveryManager]
(QuartzScheduler_Worker-3) [33d15439] Autorecovering hosts id:
033febb8-4f52-4253-bb6d-a8807816affd, name : KVM-02
2013-02-13 11:00:00,005 INFO
[org.ovirt.engine.core.bll.ActivateVdsCommand]
(QuartzScheduler_Worker-3) [195b25c6] Lock Acquired to object
EngineLock [exclusiveLocks=3D key:
033febb8-4f52-4253-bb6d-a8807816affd value: VDS
, sharedLocks=3D ]
2013-02-13 11:00:00,006 INFO
[org.ovirt.engine.core.bll.ActivateVdsCommand]
(QuartzScheduler_Worker-3) [195b25c6] Running command:
ActivateVdsCommand internal: true. Entities affected : ID:
033febb8-4f52-4253-bb6d-a8807816affd Type: VDS
2013-02-13 11:00:00,011 INFO
[org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand]
(QuartzScheduler_Worker-3) [195b25c6] START,
SetVdsStatusVDSCommand(HostName =3D KVM-02, HostId =3D
033febb8-4f52-4253-bb6d-a8807816affd, status=3DUnassigned,
nonOperationalReason=3DNONE), log id: 153fb58f
2013-02-13 11:00:00,013 INFO
[org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand]
(QuartzScheduler_Worker-3) [195b25c6] FINISH,
SetVdsStatusVDSCommand, log id: 153fb58f
2013-02-13 11:00:00,052 INFO
[org.ovirt.engine.core.vdsbroker.ActivateVdsVDSCommand]
(QuartzScheduler_Worker-3) [195b25c6] START,
ActivateVdsVDSCommand(HostName =3D KVM-02, HostId =3D
033febb8-4f52-4253-bb6d-a8807816affd), log id: 3f784d25
2013-02-13 11:00:00,176 INFO
[org.ovirt.engine.core.vdsbroker.vdsbroker.GetHardwareInfoVDSCommand]
(QuartzScheduler_Worker-3) [195b25c6] START,
GetHardwareInfoVDSCommand(HostName =3D KVM-02, HostId =3D
033febb8-4f52-4253-bb6d-a8807816affd, vds=3DHost[KVM-02]), log id:
14007e9c
2013-02-13 11:00:00,182 INFO
[org.ovirt.engine.core.vdsbroker.vdsbroker.GetHardwareInfoVDSCommand]
(QuartzScheduler_Worker-3) [195b25c6] FINISH,
GetHardwareInfoVDSCommand, log id: 14007e9c
2013-02-13 11:00:00,316 INFO
[org.ovirt.engine.core.bll.SetNonOperationalVdsCommand]
(QuartzScheduler_Worker-3) [371c6227] Running command:
SetNonOperationalVdsCommand internal: true. Entities affected : ID:
033febb8-4f52-4253-bb6d-a8807816affd Type: VDS
2013-02-13 11:00:00,319 INFO
[org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand]
(QuartzScheduler_Worker-3) [371c6227] START,
SetVdsStatusVDSCommand(HostName =3D KVM-02, HostId =3D
033febb8-4f52-4253-bb6d-a8807816affd, status=3DNonOperational,
nonOperationalReason=3DNETWORK_UNREACHABLE), log id: 62bc0d10
2013-02-13 11:00:00,321 INFO
[org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand]
(QuartzScheduler_Worker-3) [371c6227] FINISH,
SetVdsStatusVDSCommand, log id: 62bc0d10
2013-02-13 11:00:00,322 ERROR
[org.ovirt.engine.core.bll.SetNonOperationalVdsCommand]
(QuartzScheduler_Worker-3) [371c6227] Host KVM-02 is set to
Non-Operational, it is missing the following networks:
devvms,WAN_02_02
2013-02-13 11:00:00,377 INFO
[org.ovirt.engine.core.bll.HandleVdsCpuFlagsOrClusterChangedCommand]
(QuartzScheduler_Worker-3) [3101152] Running command:
HandleVdsCpuFlagsOrClusterChangedCommand internal: true. Entities
affected : ID: 033febb8-4f52-4253-bb6d-a8807816affd Type: VDS
2013-02-13 11:00:00,382 INFO
[org.ovirt.engine.core.bll.HandleVdsVersionCommand]
(QuartzScheduler_Worker-3) [657f5a74] Running command:
HandleVdsVersionCommand internal: true. Entities affected : ID:
033febb8-4f52-4253-bb6d-a8807816affd Type: VDS
2013-02-13 11:00:00,388 INFO
[org.ovirt.engine.core.vdsbroker.ActivateVdsVDSCommand]
(QuartzScheduler_Worker-3) [657f5a74] FINISH, ActivateVdsVDSCommand,
log id: 3f784d25
2013-02-13 11:00:00,392 WARN
[org.ovirt.engine.core.bll.InternalMigrateVmCommand]
(pool-3-thread-46) CanDoAction of action InternalMigrateVm failed.
Reasons:ACTION_TYPE_FAILED_VM_IS_NON_MIGRTABLE
2013-02-13 11:00:00,393 ERROR
[org.ovirt.engine.core.bll.SetNonOperationalVdsCommand]
(pool-3-thread-46) ResourceManager::vdsMaintenance - Failed
migrating desktop crm-int.office.msp.cullie.local
2013-02-13 11:00:00,458 INFO
[org.ovirt.engine.core.bll.ActivateVdsCommand]
(QuartzScheduler_Worker-3) [657f5a74] Lock freed to object
EngineLock [exclusiveLocks=3D key:
033febb8-4f52-4253-bb6d-a8807816affd value: VDS
, sharedLocks=3D ]
2013-02-13 11:00:00,460 INFO
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(QuartzScheduler_Worker-3) [657f5a74] No string for
VDS_ACTIVATE_ASYNC type. Use default Log
2013-02-13 11:00:00,462 INFO
[org.ovirt.engine.core.bll.AutoRecoveryManager]
(QuartzScheduler_Worker-3) [657f5a74] Autorecovering 0 storage
domains
2013/2/13 Nicolas Ecarnot < nicolas(a)ecarnot.net >
> Le 12/02/2013 22:43, Moti Asayag a =C3=A9crit :
=20
> > On 02/11/2013 12:37 PM, Matt . wrote:
>=20
=20
> > > I'm struggeling setting up my network in oVirt at
the moment as
> > > I
> > > would
> >=20
>=20
=20
> > > like to seperate specific VM's from other devices/clients in my
> > > network.
> >=20
>=20
=20
> > You should define the 'logical networks' which
describe the
> > networks
> > of
>=20
=20
> > your setup.
>=20
=20
> > See the response to Nicolas on this thread of the steps to
> > achieve
> > it.
>=20
=20
> Thank you to Moti, Pavel and Mike ho took time to answer to
Matt
> and
> me.
=20
> This also explained to me a lot about what can be done and how, and
> it clearly forecasts a future very nice setup I'll work on.
=20
> Thank you.
=20
> --
=20
> Nicolas Ecarnot
=20
> ______________________________ _________________
=20
> Users mailing list
=20
> Users(a)ovirt.org
=20
> http://lists.ovirt.org/ mailman/listinfo/users
=20
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
------=_Part_1629271_1077479170.1360836918613
Content-Type: text/html; charset=utf-8
Content-Transfer-Encoding: quoted-printable
<html><head><style type=3D'text/css'>p { margin: 0;
}</style></head><body><=
div style=3D'font-family: times new roman,new york,times,serif; font-size: =
12pt; color: #000000'><hr id=3D"zwchr"><blockquote
style=3D"border-left:2px=
solid rgb(16, 16, 255);margin-left:5px;padding-left:5px;color:#000;font-we=
ight:normal;font-style:normal;text-decoration:none;font-family:Helvetica,Ar=
ial,sans-serif;font-size:12pt;"><div dir=3D"ltr"><div
id=3D"DWT2547"><div>T=
hanks indeed, I'm with Nicolas, also working on a nice setup with this info=
rmation!<br><br></div>Here is some more
logging:<br></div></div></blockquot=
e>Thanks for the log.<br><br>Unfortunately I can't tell much from it,
can y=
ou please send a log of the setup networks command from VDSM log, where it =
is possible to see the parameters that have been sent to the command?<br><b=
lockquote style=3D"border-left:2px solid rgb(16, 16, 255);margin-left:5px;p=
adding-left:5px;color:#000;font-weight:normal;font-style:normal;text-decora=
tion:none;font-family:Helvetica,Arial,sans-serif;font-size:12pt;"><div dir=
=3D"ltr"><div><br></div>The error came after I added
WAN_02_02 with no IP.<=
br><br
4299
days inactive
4302
days old
14 comments
7 participants
participants (7)
-
Gianluca Cecchi -
Matt . -
Mike Kolesnik -
Moti Asayag -
Nicolas Ecarnot -
Pavel Zhukov -
Pavel Zhukov