5:40 a.m.
--_000_D86C48DF8800164BBE50B87623F7AC9548080D6Eln2wio001devtra_
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
I have a problem where VM network profiles are lost when editing a host. E.=
G.
* VM is running fine on the correct network. Network Interfaces tab=
shows "nic1" and "Network Name" shows the correct network profile.
* I shutdown the VM then right click and Edit.
* The General settings for the node shows "nic1 <Empty>". If I
then=
edit config, something like increasing memory or changing CPU cores then c=
lick on OK, the VM configuration is saved without a network profile.
* When I boot the VM I cannot connect to it.
* I then have to edit the node again configure back in the correct =
network profile.
Does anyone know if this is a known issue? If not, any suggestions as to ho=
w I correct this so that the original network profile definition is retaine=
d after an edit?
Many thanks,
Simon
--_000_D86C48DF8800164BBE50B87623F7AC9548080D6Eln2wio001devtra_
Content-Type: text/html; charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
<html xmlns:v=3D"urn:schemas-microsoft-com:vml"
xmlns:o=3D"urn:schemas-micr=
osoft-com:office:office" xmlns:w=3D"urn:schemas-microsoft-com:office:word"
=
xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml"
xmlns=3D"http:=
//www.w3.org/TR/REC-html40" <head <meta http-equiv=3D"Content-Type"
content=3D"text/html; charset=3Dus-ascii"=
<meta name=3D"Generator" content=3D"Microsoft
Word 15 (filtered medium)" <style><!--
/* Font Definitions */
@font-face
{font-family:Wingdings;
panose-1:5 0 0 0 0 0 0 0 0 0;}
@font-face
{font-family:"Cambria Math";
panose-1:2 4 5 3 5 4 6 3 2 4;}
@font-face
{font-family:Calibri;
panose-1:2 15 5 2 2 2 4 3 2 4;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0cm;
margin-bottom:.0001pt;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-fareast-language:EN-US;}
a:link, span.MsoHyperlink
{mso-style-priority:99;
color:#0563C1;
text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
{mso-style-priority:99;
color:#954F72;
text-decoration:underline;}
p.MsoListParagraph, li.MsoListParagraph, div.MsoListParagraph
{mso-style-priority:34;
margin-top:0cm;
margin-right:0cm;
margin-bottom:0cm;
margin-left:36.0pt;
margin-bottom:.0001pt;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-fareast-language:EN-US;}
span.EmailStyle17
{mso-style-type:personal-compose;
font-family:"Calibri","sans-serif";
color:windowtext;}
.MsoChpDefault
{mso-style-type:export-only;
font-family:"Calibri","sans-serif";
mso-fareast-language:EN-US;}
@page WordSection1
{size:612.0pt 792.0pt;
margin:72.0pt 72.0pt 72.0pt 72.0pt;}
div.WordSection1
{page:WordSection1;}
/* List Definitions */
@list l0
{mso-list-id:1503741428;
mso-list-type:hybrid;
mso-list-template-ids:-1164301930 134807553 134807555 134807557 134807553 =
134807555 134807557 134807553 134807555 134807557;}
@list l0:level1
{mso-level-number-format:bullet;
mso-level-text:\F0B7;
mso-level-tab-stop:none;
mso-level-number-position:left;
text-indent:-18.0pt;
font-family:Symbol;}
@list l0:level2
{mso-level-number-format:bullet;
mso-level-text:o;
mso-level-tab-stop:none;
mso-level-number-position:left;
text-indent:-18.0pt;
font-family:"Courier New","serif";}
@list l0:level3
{mso-level-number-format:bullet;
mso-level-text:\F0A7;
mso-level-tab-stop:none;
mso-level-number-position:left;
text-indent:-18.0pt;
font-family:Wingdings;}
@list l0:level4
{mso-level-number-format:bullet;
mso-level-text:\F0B7;
mso-level-tab-stop:none;
mso-level-number-position:left;
text-indent:-18.0pt;
font-family:Symbol;}
@list l0:level5
{mso-level-number-format:bullet;
mso-level-text:o;
mso-level-tab-stop:none;
mso-level-number-position:left;
text-indent:-18.0pt;
font-family:"Courier New","serif";}
@list l0:level6
{mso-level-number-format:bullet;
mso-level-text:\F0A7;
mso-level-tab-stop:none;
mso-level-number-position:left;
text-indent:-18.0pt;
font-family:Wingdings;}
@list l0:level7
{mso-level-number-format:bullet;
mso-level-text:\F0B7;
mso-level-tab-stop:none;
mso-level-number-position:left;
text-indent:-18.0pt;
font-family:Symbol;}
@list l0:level8
{mso-level-number-format:bullet;
mso-level-text:o;
mso-level-tab-stop:none;
mso-level-number-position:left;
text-indent:-18.0pt;
font-family:"Courier New","serif";}
@list l0:level9
{mso-level-number-format:bullet;
mso-level-text:\F0A7;
mso-level-tab-stop:none;
mso-level-number-position:left;
text-indent:-18.0pt;
font-family:Wingdings;}
ol
{margin-bottom:0cm;}
ul
{margin-bottom:0cm;}
--></style><!--[if gte mso 9]><xml
<o:shapedefaults v:ext=3D"edit" spidmax=3D"1026" / </xml><![endif]--><!--[if gte mso
9]><xml <o:shapelayout
v:ext=3D"edit" <o:idmap v:ext=3D"edit"
data=3D"1" /
</o:shapelayout></xml><![endif]--
</head <body lang=3D"EN-GB"
link=3D"#0563C1" vlink=3D"#954F72" <div
class=3D"WordSection1" <p
class=3D"MsoNormal">I have a problem where VM network profiles are lost =
when editing a host. E.G.<o:p></o:p></p <p
class=3D"MsoNormal"><o:p> </o:p></p <p class=3D"MsoListParagraph"
style=3D"text-indent:-18.0pt;mso-list:l0 leve=
l1 lfo1"><![if !supportLists]><span
style=3D"font-family:Symbol"><span styl=
e=3D"mso-list:Ignore">·<span style=3D"font:7.0pt
"Times New Rom=
an"">
</span></span></span><![endif]>VM is running fine on the correct
network. N=
etwork Interfaces tab shows “nic1” and “Network
Name̶=
1; shows the correct network profile.<o:p></o:p></p <p class=3D"MsoListParagraph"
style=3D"text-indent:-18.0pt;mso-list:l0 leve=
l1 lfo1"><![if !supportLists]><span
style=3D"font-family:Symbol"><span styl=
e=3D"mso-list:Ignore">·<span style=3D"font:7.0pt
"Times New Rom=
an"">
</span></span></span><![endif]>I shutdown the VM then right click
and Edit.=
<o:p></o:p></p <p
class=3D"MsoListParagraph" style=3D"text-indent:-18.0pt;mso-list:l0 leve=
l1 lfo1"><![if !supportLists]><span
style=3D"font-family:Symbol"><span styl=
e=3D"mso-list:Ignore">·<span style=3D"font:7.0pt
"Times New Rom=
an"">
</span></span></span><![endif]>The General settings for the node
shows R=
20;nic1 <Empty>”. If I then edit config, something like increas=
ing memory or changing CPU cores then click on OK, the VM configuration is =
saved without a network profile.<o:p></o:p></p <p
class=3D"MsoListParagraph" style=3D"text-indent:-18.0pt;mso-list:l0 leve=
l1 lfo1"><![if !supportLists]><span
style=3D"font-family:Symbol"><span styl=
e=3D"mso-list:Ignore">·<span style=3D"font:7.0pt
"Times New Rom=
an"">
</span></span></span><![endif]>When I boot the VM I cannot connect
to it.<o=
:p></o:p></p <p
class=3D"MsoListParagraph" style=3D"text-indent:-18.0pt;mso-list:l0 leve=
l1 lfo1"><![if !supportLists]><span
style=3D"font-family:Symbol"><span styl=
e=3D"mso-list:Ignore">·<span style=3D"font:7.0pt
"Times New Rom=
an"">
</span></span></span><![endif]>I then have to edit the node again
configure=
back in the correct network profile.<o:p></o:p></p <p
class=3D"MsoNormal"><o:p> </o:p></p <p class=3D"MsoNormal">Does anyone know if this
is a known issue? If not, a=
ny suggestions as to how I correct this so that the original network profil=
e definition is retained after an edit?<o:p></o:p></p <p
class=3D"MsoNormal"><o:p> </o:p></p <p class=3D"MsoNormal">Many
thanks,<o:p></o:p></p <p
class=3D"MsoNormal"><o:p> </o:p></p <p
class=3D"MsoNormal">Simon<o:p></o:p></p <p
class=3D"MsoNormal"><o:p> </o:p></p </div
</body </html
--_000_D86C48DF8800164BBE50B87623F7AC9548080D6Eln2wio001devtra_--
1:42 a.m.
----- Original Message -----
From: "Simon Barrett"
<Simon.Barrett(a)tradingscreen.com>
To: users(a)ovirt.org
Sent: Wednesday, December 11, 2013 1:40:09 PM
Subject: [Users] Network profile lost after host edit
I have a problem where VM network profiles are lost when editing a host. E.G.
· VM is running fine on the correct network. Network Interfaces tab shows
“nic1” and “Network Name” shows the correct network profile.
· I shutdown the VM then right click and Edit.
· The General settings for the node shows “nic1 <Empty>”. If I then edit
config, something like increasing memory or changing CPU cores then click on
OK, the VM configuration is saved without a network profile.
· When I boot the VM I cannot connect to it.
· I then have to edit the node again configure back in the correct network
profile.
Does anyone know if this is a known issue? If not, any suggestions as to how
I correct this so that the original network profile definition is retained
after an edit?
I know Lior (cc'ed) fixed few bugs in this area and on the latest master I'm not
facing
such a behaviour.
In the future we plan to block editing the vm nics in that context.
What version of ovirt-engine are you using ?
Many thanks,
Simon
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
3:43 p.m.
Hi Simon,
I apologize for the delay in my response. I've worked quite a bit on
that part of the dialog since oVirt 3.3, and while it was quite buggy I
haven't encountered this exact issue you're describing. It does remind
me of one bug though; could it be that pressing the "Show Advanced
Options" is what triggers the strange behavior?
What version of oVirt engine are you running? Both 3.3.1 and 3.3.2
should be quite stable as far as this dialog is concerned, so upgrading
might be a good idea.
As for workarounds, it sounds like a GUI issue so I don't think there's
anything you can do apart from upgrading the engine.
Yours, Lior.
On 11/12/13 13:40, Simon Barrett wrote:
I have a problem where VM network profiles are lost when editing a
host.
E.G.
· VM is running fine on the correct network. Network Interfaces
tab shows nic1 and Network Name shows the correct network profile.
· I shutdown the VM then right click and Edit.
· The General settings for the node shows nic1 <Empty>. If I
then edit config, something like increasing memory or changing CPU cores
then click on OK, the VM configuration is saved without a network profile.
· When I boot the VM I cannot connect to it.
· I then have to edit the node again configure back in the
correct network profile.
Does anyone know if this is a known issue? If not, any suggestions as to
how I correct this so that the original network profile definition is
retained after an edit?
Many thanks,
Simon
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
3:52 p.m.
Lior,
I'm running 3.3.1.
I think it may be related to how I created the VM's. Another VM created using the
blank template works fine and the network config displays correctly when I click on edit.
The problem VM's were created with a different template. I'll dig a bit further to
see if I can narrow it down any further.
I don't have to click show advanced to exhibit the problem.
Thanks for the response
Simon
On 12 Dec 2013, at 16:44, "Lior Vernia"
<lvernia(a)redhat.com> wrote:
Hi Simon,
I apologize for the delay in my response. I've worked quite a bit on
that part of the dialog since oVirt 3.3, and while it was quite buggy I
haven't encountered this exact issue you're describing. It does remind
me of one bug though; could it be that pressing the "Show Advanced
Options" is what triggers the strange behavior?
What version of oVirt engine are you running? Both 3.3.1 and 3.3.2
should be quite stable as far as this dialog is concerned, so upgrading
might be a good idea.
As for workarounds, it sounds like a GUI issue so I don't think there's
anything you can do apart from upgrading the engine.
Yours, Lior.
> On 11/12/13 13:40, Simon Barrett wrote:
> I have a problem where VM network profiles are lost when editing a host.
> E.G.
>
>
>
> · VM is running fine on the correct network. Network Interfaces
> tab shows nic1 and Network Name shows the correct network profile.
>
> · I shutdown the VM then right click and Edit.
>
> · The General settings for the node shows nic1 <Empty>. If I
> then edit config, something like increasing memory or changing CPU cores
> then click on OK, the VM configuration is saved without a network profile.
>
> · When I boot the VM I cannot connect to it.
>
> · I then have to edit the node again configure back in the
> correct network profile.
>
>
>
> Does anyone know if this is a known issue? If not, any suggestions as to
> how I correct this so that the original network profile definition is
> retained after an edit?
>
>
>
> Many thanks,
>
>
>
> Simon
>
>
>
>
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
4:05 p.m.
Hey Simon,
It actually doesn't surprise me that it's related to the template,
because we had other issues that were template-related in this dialog.
However, I haven't been able to reproduce it myself when working from
the master branch. So either it got fixed between 3.3.1 and now, or I
just didn't try anything complex enough.
If you could find some consistent way to reproduce the bug (BTW, it's
definitely a bug and not by design), then we could determine whether it
has indeed been solved in the meantime. And if not, we'll make sure that
it's fixed.
Yours, Lior.
On 12/12/13 23:52, Simon Barrett wrote:
Lior,
I'm running 3.3.1.
I think it may be related to how I created the VM's. Another VM created using the
blank template works fine and the network config displays correctly when I click on edit.
The problem VM's were created with a different template. I'll dig a bit further
to see if I can narrow it down any further.
I don't have to click show advanced to exhibit the problem.
Thanks for the response
Simon
> On 12 Dec 2013, at 16:44, "Lior Vernia" <lvernia(a)redhat.com> wrote:
>
> Hi Simon,
>
> I apologize for the delay in my response. I've worked quite a bit on
> that part of the dialog since oVirt 3.3, and while it was quite buggy I
> haven't encountered this exact issue you're describing. It does remind
> me of one bug though; could it be that pressing the "Show Advanced
> Options" is what triggers the strange behavior?
>
> What version of oVirt engine are you running? Both 3.3.1 and 3.3.2
> should be quite stable as far as this dialog is concerned, so upgrading
> might be a good idea.
>
> As for workarounds, it sounds like a GUI issue so I don't think there's
> anything you can do apart from upgrading the engine.
>
> Yours, Lior.
>
>> On 11/12/13 13:40, Simon Barrett wrote:
>> I have a problem where VM network profiles are lost when editing a host.
>> E.G.
>>
>>
>>
>> · VM is running fine on the correct network. Network Interfaces
>> tab shows “nic1” and “Network Name” shows the correct network profile.
>>
>> · I shutdown the VM then right click and Edit.
>>
>> · The General settings for the node shows “nic1 <Empty>”. If I
>> then edit config, something like increasing memory or changing CPU cores
>> then click on OK, the VM configuration is saved without a network profile.
>>
>> · When I boot the VM I cannot connect to it.
>>
>> · I then have to edit the node again configure back in the
>> correct network profile.
>>
>>
>>
>> Does anyone know if this is a known issue? If not, any suggestions as to
>> how I correct this so that the original network profile definition is
>> retained after an edit?
>>
>>
>>
>> Many thanks,
>>
>>
>>
>> Simon
>>
>>
>>
>>
>>
>> _______________________________________________
>> Users mailing list
>> Users(a)ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>
4:21 a.m.
I am now able to reproduce the problem where network profile definitions are lost on VM
edit.
- Create VM
- From the "Network Interfaces" tab, click on "New" and assign the
ovirtmgt profile to nic1
- Edit VM, from the "nic1" drop down select another profile and click OK
- Edit the same VM again and nic1 lists as <Empty>
I upgraded to 3.3.2-1.el6 and still see the problem.
As ever, any help is very much appreciated.
Thanks,
Simon
-----Original Message-----
From: users-bounces(a)ovirt.org [mailto:users-bounces@ovirt.org] On Behalf Of Simon Barrett
Sent: 12 December 2013 21:53
To: Lior Vernia
Cc: users(a)ovirt.org
Subject: Re: [Users] Network profile lost after host edit
Lior,
I'm running 3.3.1.
I think it may be related to how I created the VM's. Another VM created using the
blank template works fine and the network config displays correctly when I click on edit.
The problem VM's were created with a different template. I'll dig a bit further to
see if I can narrow it down any further.
I don't have to click show advanced to exhibit the problem.
Thanks for the response
Simon
On 12 Dec 2013, at 16:44, "Lior Vernia"
<lvernia(a)redhat.com> wrote:
Hi Simon,
I apologize for the delay in my response. I've worked quite a bit on
that part of the dialog since oVirt 3.3, and while it was quite buggy
I haven't encountered this exact issue you're describing. It does
remind me of one bug though; could it be that pressing the "Show
Advanced Options" is what triggers the strange behavior?
What version of oVirt engine are you running? Both 3.3.1 and 3.3.2
should be quite stable as far as this dialog is concerned, so
upgrading might be a good idea.
As for workarounds, it sounds like a GUI issue so I don't think
there's anything you can do apart from upgrading the engine.
Yours, Lior.
> On 11/12/13 13:40, Simon Barrett wrote:
> I have a problem where VM network profiles are lost when editing a host.
> E.G.
>
>
>
> * VM is running fine on the correct network. Network Interfaces
> tab shows "nic1" and "Network Name" shows the correct network
profile.
>
> * I shutdown the VM then right click and Edit.
>
> * The General settings for the node shows "nic1 <Empty>". If
I
> then edit config, something like increasing memory or changing CPU
> cores then click on OK, the VM configuration is saved without a network profile.
>
> * When I boot the VM I cannot connect to it.
>
> * I then have to edit the node again configure back in the
> correct network profile.
>
>
>
> Does anyone know if this is a known issue? If not, any suggestions as
> to how I correct this so that the original network profile definition
> is retained after an edit?
>
>
>
> Many thanks,
>
>
>
> Simon
>
>
>
>
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
12:59 a.m.
Hi Simon,
Thank you so much for tracking this down. I'm currently immersed in
oVirt 3.4 feature stuff, but I just wanted to let you know I saw this
and am planning to take care of it; I'll take a look in a week or two
when things calm down.
The bad news are, I suspect there will be no workaround other than
upgrading to the next version that will include the fix (likely 3.3.3).
Yours, Lior.
On 06/01/14 12:21, Simon Barrett wrote:
I am now able to reproduce the problem where network profile
definitions are lost on VM edit.
- Create VM
- From the "Network Interfaces" tab, click on "New" and assign the
ovirtmgt profile to nic1
- Edit VM, from the "nic1" drop down select another profile and click OK
- Edit the same VM again and nic1 lists as <Empty>
I upgraded to 3.3.2-1.el6 and still see the problem.
As ever, any help is very much appreciated.
Thanks,
Simon
-----Original Message-----
From: users-bounces(a)ovirt.org [mailto:users-bounces@ovirt.org] On Behalf Of Simon
Barrett
Sent: 12 December 2013 21:53
To: Lior Vernia
Cc: users(a)ovirt.org
Subject: Re: [Users] Network profile lost after host edit
Lior,
I'm running 3.3.1.
I think it may be related to how I created the VM's. Another VM created using the
blank template works fine and the network config displays correctly when I click on edit.
The problem VM's were created with a different template. I'll dig a bit further
to see if I can narrow it down any further.
I don't have to click show advanced to exhibit the problem.
Thanks for the response
Simon
> On 12 Dec 2013, at 16:44, "Lior Vernia" <lvernia(a)redhat.com> wrote:
>
> Hi Simon,
>
> I apologize for the delay in my response. I've worked quite a bit on
> that part of the dialog since oVirt 3.3, and while it was quite buggy
> I haven't encountered this exact issue you're describing. It does
> remind me of one bug though; could it be that pressing the "Show
> Advanced Options" is what triggers the strange behavior?
>
> What version of oVirt engine are you running? Both 3.3.1 and 3.3.2
> should be quite stable as far as this dialog is concerned, so
> upgrading might be a good idea.
>
> As for workarounds, it sounds like a GUI issue so I don't think
> there's anything you can do apart from upgrading the engine.
>
> Yours, Lior.
>
>> On 11/12/13 13:40, Simon Barrett wrote:
>> I have a problem where VM network profiles are lost when editing a host.
>> E.G.
>>
>>
>>
>> * VM is running fine on the correct network. Network Interfaces
>> tab shows "nic1" and "Network Name" shows the correct network
profile.
>>
>> * I shutdown the VM then right click and Edit.
>>
>> * The General settings for the node shows "nic1 <Empty>".
If I
>> then edit config, something like increasing memory or changing CPU
>> cores then click on OK, the VM configuration is saved without a network profile.
>>
>> * When I boot the VM I cannot connect to it.
>>
>> * I then have to edit the node again configure back in the
>> correct network profile.
>>
>>
>>
>> Does anyone know if this is a known issue? If not, any suggestions as
>> to how I correct this so that the original network profile definition
>> is retained after an edit?
>>
>>
>>
>> Many thanks,
>>
>>
>>
>> Simon
>>
>>
>>
>>
>>
>> _______________________________________________
>> Users mailing list
>> Users(a)ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
3:16 p.m.
On 01/07/2014 08:59 AM, Lior Vernia wrote:
Hi Simon,
Thank you so much for tracking this down. I'm currently immersed in
oVirt 3.4 feature stuff, but I just wanted to let you know I saw this
and am planning to take care of it; I'll take a look in a week or two
when things calm down.
The bad news are, I suspect there will be no workaround other than
upgrading to the next version that will include the fix (likely 3.3.3).
is there an ovirt bug targeted to 3.3.3 tracking this?
Yours, Lior.
On 06/01/14 12:21, Simon Barrett wrote:
> I am now able to reproduce the problem where network profile definitions are lost on
VM edit.
>
> - Create VM
> - From the "Network Interfaces" tab, click on "New" and assign
the ovirtmgt profile to nic1
> - Edit VM, from the "nic1" drop down select another profile and click OK
> - Edit the same VM again and nic1 lists as <Empty>
>
> I upgraded to 3.3.2-1.el6 and still see the problem.
>
> As ever, any help is very much appreciated.
>
> Thanks,
>
> Simon
>
>
> -----Original Message-----
> From: users-bounces(a)ovirt.org [mailto:users-bounces@ovirt.org] On Behalf Of Simon
Barrett
> Sent: 12 December 2013 21:53
> To: Lior Vernia
> Cc: users(a)ovirt.org
> Subject: Re: [Users] Network profile lost after host edit
>
> Lior,
>
> I'm running 3.3.1.
>
> I think it may be related to how I created the VM's. Another VM created using the
blank template works fine and the network config displays correctly when I click on edit.
>
> The problem VM's were created with a different template. I'll dig a bit
further to see if I can narrow it down any further.
>
> I don't have to click show advanced to exhibit the problem.
>
> Thanks for the response
>
> Simon
>
>> On 12 Dec 2013, at 16:44, "Lior Vernia" <lvernia(a)redhat.com>
wrote:
>>
>> Hi Simon,
>>
>> I apologize for the delay in my response. I've worked quite a bit on
>> that part of the dialog since oVirt 3.3, and while it was quite buggy
>> I haven't encountered this exact issue you're describing. It does
>> remind me of one bug though; could it be that pressing the "Show
>> Advanced Options" is what triggers the strange behavior?
>>
>> What version of oVirt engine are you running? Both 3.3.1 and 3.3.2
>> should be quite stable as far as this dialog is concerned, so
>> upgrading might be a good idea.
>>
>> As for workarounds, it sounds like a GUI issue so I don't think
>> there's anything you can do apart from upgrading the engine.
>>
>> Yours, Lior.
>>
>>> On 11/12/13 13:40, Simon Barrett wrote:
>>> I have a problem where VM network profiles are lost when editing a host.
>>> E.G.
>>>
>>>
>>>
>>> * VM is running fine on the correct network. Network Interfaces
>>> tab shows "nic1" and "Network Name" shows the correct
network profile.
>>>
>>> * I shutdown the VM then right click and Edit.
>>>
>>> * The General settings for the node shows "nic1
<Empty>". If I
>>> then edit config, something like increasing memory or changing CPU
>>> cores then click on OK, the VM configuration is saved without a network
profile.
>>>
>>> * When I boot the VM I cannot connect to it.
>>>
>>> * I then have to edit the node again configure back in the
>>> correct network profile.
>>>
>>>
>>>
>>> Does anyone know if this is a known issue? If not, any suggestions as
>>> to how I correct this so that the original network profile definition
>>> is retained after an edit?
>>>
>>>
>>>
>>> Many thanks,
>>>
>>>
>>>
>>> Simon
>>>
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> Users mailing list
>>> Users(a)ovirt.org
>>> http://lists.ovirt.org/mailman/listinfo/users
>>>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
12:02 a.m.
On 07/01/14 23:16, Itamar Heim wrote:
On 01/07/2014 08:59 AM, Lior Vernia wrote:
> Hi Simon,
>
> Thank you so much for tracking this down. I'm currently immersed in
> oVirt 3.4 feature stuff, but I just wanted to let you know I saw this
> and am planning to take care of it; I'll take a look in a week or two
> when things calm down.
>
> The bad news are, I suspect there will be no workaround other than
> upgrading to the next version that will include the fix (likely 3.3.3).
>
is there an ovirt bug targeted to 3.3.3 tracking this?
I'll open one as soon as I test the issue. Unless Simon would like to
pick up the gauntlet and open one on bugzilla.redhat.com?...
> Yours, Lior.
>
> On 06/01/14 12:21, Simon Barrett wrote:
>> I am now able to reproduce the problem where network profile
>> definitions are lost on VM edit.
>>
>> - Create VM
>> - From the "Network Interfaces" tab, click on "New" and
assign the
>> ovirtmgt profile to nic1
>> - Edit VM, from the "nic1" drop down select another profile and click
OK
>> - Edit the same VM again and nic1 lists as <Empty>
>>
>> I upgraded to 3.3.2-1.el6 and still see the problem.
>>
>> As ever, any help is very much appreciated.
>>
>> Thanks,
>>
>> Simon
>>
>>
>> -----Original Message-----
>> From: users-bounces(a)ovirt.org [mailto:users-bounces@ovirt.org] On
>> Behalf Of Simon Barrett
>> Sent: 12 December 2013 21:53
>> To: Lior Vernia
>> Cc: users(a)ovirt.org
>> Subject: Re: [Users] Network profile lost after host edit
>>
>> Lior,
>>
>> I'm running 3.3.1.
>>
>> I think it may be related to how I created the VM's. Another VM
>> created using the blank template works fine and the network config
>> displays correctly when I click on edit.
>>
>> The problem VM's were created with a different template. I'll dig a
>> bit further to see if I can narrow it down any further.
>>
>> I don't have to click show advanced to exhibit the problem.
>>
>> Thanks for the response
>>
>> Simon
>>
>>> On 12 Dec 2013, at 16:44, "Lior Vernia" <lvernia(a)redhat.com>
wrote:
>>>
>>> Hi Simon,
>>>
>>> I apologize for the delay in my response. I've worked quite a bit on
>>> that part of the dialog since oVirt 3.3, and while it was quite buggy
>>> I haven't encountered this exact issue you're describing. It does
>>> remind me of one bug though; could it be that pressing the "Show
>>> Advanced Options" is what triggers the strange behavior?
>>>
>>> What version of oVirt engine are you running? Both 3.3.1 and 3.3.2
>>> should be quite stable as far as this dialog is concerned, so
>>> upgrading might be a good idea.
>>>
>>> As for workarounds, it sounds like a GUI issue so I don't think
>>> there's anything you can do apart from upgrading the engine.
>>>
>>> Yours, Lior.
>>>
>>>> On 11/12/13 13:40, Simon Barrett wrote:
>>>> I have a problem where VM network profiles are lost when editing a
>>>> host.
>>>> E.G.
>>>>
>>>>
>>>>
>>>> * VM is running fine on the correct network. Network
>>>> Interfaces
>>>> tab shows "nic1" and "Network Name" shows the correct
network profile.
>>>>
>>>> * I shutdown the VM then right click and Edit.
>>>>
>>>> * The General settings for the node shows "nic1
<Empty>". If I
>>>> then edit config, something like increasing memory or changing CPU
>>>> cores then click on OK, the VM configuration is saved without a
>>>> network profile.
>>>>
>>>> * When I boot the VM I cannot connect to it.
>>>>
>>>> * I then have to edit the node again configure back in the
>>>> correct network profile.
>>>>
>>>>
>>>>
>>>> Does anyone know if this is a known issue? If not, any suggestions as
>>>> to how I correct this so that the original network profile definition
>>>> is retained after an edit?
>>>>
>>>>
>>>>
>>>> Many thanks,
>>>>
>>>>
>>>>
>>>> Simon
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Users mailing list
>>>> Users(a)ovirt.org
>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>
>> _______________________________________________
>> Users mailing list
>> Users(a)ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
2:49 a.m.
To test this further I setup another 3.3.2-1.el6 ovirt-engine. I'm not seeing the same
problem on the new engine.
I'm going to try and move all configuration/VM's etc from the problem ovirt-engine
install to the new one to see if the problem re-appears.
I'll let you know how it goes.
Simon
-----Original Message-----
From: Lior Vernia [mailto:lvernia@redhat.com]
Sent: 08 January 2014 06:02
To: Itamar Heim
Cc: Simon Barrett; users(a)ovirt.org
Subject: Re: [Users] Network profile lost after host edit
On 07/01/14 23:16, Itamar Heim wrote:
On 01/07/2014 08:59 AM, Lior Vernia wrote:
> Hi Simon,
>
> Thank you so much for tracking this down. I'm currently immersed in
> oVirt 3.4 feature stuff, but I just wanted to let you know I saw this
> and am planning to take care of it; I'll take a look in a week or two
> when things calm down.
>
> The bad news are, I suspect there will be no workaround other than
> upgrading to the next version that will include the fix (likely 3.3.3).
>
is there an ovirt bug targeted to 3.3.3 tracking this?
I'll open one as soon as I test the issue. Unless Simon would like to pick up the
gauntlet and open one on bugzilla.redhat.com?...
> Yours, Lior.
>
> On 06/01/14 12:21, Simon Barrett wrote:
>> I am now able to reproduce the problem where network profile
>> definitions are lost on VM edit.
>>
>> - Create VM
>> - From the "Network Interfaces" tab, click on "New" and
assign the
>> ovirtmgt profile to nic1
>> - Edit VM, from the "nic1" drop down select another profile and
>> click OK
>> - Edit the same VM again and nic1 lists as <Empty>
>>
>> I upgraded to 3.3.2-1.el6 and still see the problem.
>>
>> As ever, any help is very much appreciated.
>>
>> Thanks,
>>
>> Simon
>>
>>
>> -----Original Message-----
>> From: users-bounces(a)ovirt.org [mailto:users-bounces@ovirt.org] On
>> Behalf Of Simon Barrett
>> Sent: 12 December 2013 21:53
>> To: Lior Vernia
>> Cc: users(a)ovirt.org
>> Subject: Re: [Users] Network profile lost after host edit
>>
>> Lior,
>>
>> I'm running 3.3.1.
>>
>> I think it may be related to how I created the VM's. Another VM
>> created using the blank template works fine and the network config
>> displays correctly when I click on edit.
>>
>> The problem VM's were created with a different template. I'll dig a
>> bit further to see if I can narrow it down any further.
>>
>> I don't have to click show advanced to exhibit the problem.
>>
>> Thanks for the response
>>
>> Simon
>>
>>> On 12 Dec 2013, at 16:44, "Lior Vernia" <lvernia(a)redhat.com>
wrote:
>>>
>>> Hi Simon,
>>>
>>> I apologize for the delay in my response. I've worked quite a bit
>>> on that part of the dialog since oVirt 3.3, and while it was quite
>>> buggy I haven't encountered this exact issue you're describing. It
>>> does remind me of one bug though; could it be that pressing the
>>> "Show Advanced Options" is what triggers the strange behavior?
>>>
>>> What version of oVirt engine are you running? Both 3.3.1 and 3.3.2
>>> should be quite stable as far as this dialog is concerned, so
>>> upgrading might be a good idea.
>>>
>>> As for workarounds, it sounds like a GUI issue so I don't think
>>> there's anything you can do apart from upgrading the engine.
>>>
>>> Yours, Lior.
>>>
>>>> On 11/12/13 13:40, Simon Barrett wrote:
>>>> I have a problem where VM network profiles are lost when editing a
>>>> host.
>>>> E.G.
>>>>
>>>>
>>>>
>>>> * VM is running fine on the correct network. Network
>>>> Interfaces
>>>> tab shows "nic1" and "Network Name" shows the correct
network profile.
>>>>
>>>> * I shutdown the VM then right click and Edit.
>>>>
>>>> * The General settings for the node shows "nic1
<Empty>". If I
>>>> then edit config, something like increasing memory or changing CPU
>>>> cores then click on OK, the VM configuration is saved without a
>>>> network profile.
>>>>
>>>> * When I boot the VM I cannot connect to it.
>>>>
>>>> * I then have to edit the node again configure back in the
>>>> correct network profile.
>>>>
>>>>
>>>>
>>>> Does anyone know if this is a known issue? If not, any suggestions
>>>> as to how I correct this so that the original network profile
>>>> definition is retained after an edit?
>>>>
>>>>
>>>>
>>>> Many thanks,
>>>>
>>>>
>>>>
>>>> Simon
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Users mailing list
>>>> Users(a)ovirt.org
>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>
>> _______________________________________________
>> Users mailing list
>> Users(a)ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
7:15 a.m.
I built a new Engine Server on 3.3.2-1.el6, rebuilt my VM's and I no longer see the
issue. All is now working as expected.
Simon
-----Original Message-----
From: Simon Barrett
Sent: 08 January 2014 08:50
To: Lior Vernia; Itamar Heim
Cc: users(a)ovirt.org
Subject: RE: [Users] Network profile lost after host edit
To test this further I setup another 3.3.2-1.el6 ovirt-engine. I'm not seeing the same
problem on the new engine.
I'm going to try and move all configuration/VM's etc from the problem ovirt-engine
install to the new one to see if the problem re-appears.
I'll let you know how it goes.
Simon
-----Original Message-----
From: Lior Vernia [mailto:lvernia@redhat.com]
Sent: 08 January 2014 06:02
To: Itamar Heim
Cc: Simon Barrett; users(a)ovirt.org
Subject: Re: [Users] Network profile lost after host edit
On 07/01/14 23:16, Itamar Heim wrote:
On 01/07/2014 08:59 AM, Lior Vernia wrote:
> Hi Simon,
>
> Thank you so much for tracking this down. I'm currently immersed in
> oVirt 3.4 feature stuff, but I just wanted to let you know I saw this
> and am planning to take care of it; I'll take a look in a week or two
> when things calm down.
>
> The bad news are, I suspect there will be no workaround other than
> upgrading to the next version that will include the fix (likely 3.3.3).
>
is there an ovirt bug targeted to 3.3.3 tracking this?
I'll open one as soon as I test the issue. Unless Simon would like to pick up the
gauntlet and open one on bugzilla.redhat.com?...
> Yours, Lior.
>
> On 06/01/14 12:21, Simon Barrett wrote:
>> I am now able to reproduce the problem where network profile
>> definitions are lost on VM edit.
>>
>> - Create VM
>> - From the "Network Interfaces" tab, click on "New" and
assign the
>> ovirtmgt profile to nic1
>> - Edit VM, from the "nic1" drop down select another profile and
>> click OK
>> - Edit the same VM again and nic1 lists as <Empty>
>>
>> I upgraded to 3.3.2-1.el6 and still see the problem.
>>
>> As ever, any help is very much appreciated.
>>
>> Thanks,
>>
>> Simon
>>
>>
>> -----Original Message-----
>> From: users-bounces(a)ovirt.org [mailto:users-bounces@ovirt.org] On
>> Behalf Of Simon Barrett
>> Sent: 12 December 2013 21:53
>> To: Lior Vernia
>> Cc: users(a)ovirt.org
>> Subject: Re: [Users] Network profile lost after host edit
>>
>> Lior,
>>
>> I'm running 3.3.1.
>>
>> I think it may be related to how I created the VM's. Another VM
>> created using the blank template works fine and the network config
>> displays correctly when I click on edit.
>>
>> The problem VM's were created with a different template. I'll dig a
>> bit further to see if I can narrow it down any further.
>>
>> I don't have to click show advanced to exhibit the problem.
>>
>> Thanks for the response
>>
>> Simon
>>
>>> On 12 Dec 2013, at 16:44, "Lior Vernia" <lvernia(a)redhat.com>
wrote:
>>>
>>> Hi Simon,
>>>
>>> I apologize for the delay in my response. I've worked quite a bit
>>> on that part of the dialog since oVirt 3.3, and while it was quite
>>> buggy I haven't encountered this exact issue you're describing. It
>>> does remind me of one bug though; could it be that pressing the
>>> "Show Advanced Options" is what triggers the strange behavior?
>>>
>>> What version of oVirt engine are you running? Both 3.3.1 and 3.3.2
>>> should be quite stable as far as this dialog is concerned, so
>>> upgrading might be a good idea.
>>>
>>> As for workarounds, it sounds like a GUI issue so I don't think
>>> there's anything you can do apart from upgrading the engine.
>>>
>>> Yours, Lior.
>>>
>>>> On 11/12/13 13:40, Simon Barrett wrote:
>>>> I have a problem where VM network profiles are lost when editing a
>>>> host.
>>>> E.G.
>>>>
>>>>
>>>>
>>>> * VM is running fine on the correct network. Network
>>>> Interfaces
>>>> tab shows "nic1" and "Network Name" shows the correct
network profile.
>>>>
>>>> * I shutdown the VM then right click and Edit.
>>>>
>>>> * The General settings for the node shows "nic1
<Empty>". If I
>>>> then edit config, something like increasing memory or changing CPU
>>>> cores then click on OK, the VM configuration is saved without a
>>>> network profile.
>>>>
>>>> * When I boot the VM I cannot connect to it.
>>>>
>>>> * I then have to edit the node again configure back in the
>>>> correct network profile.
>>>>
>>>>
>>>>
>>>> Does anyone know if this is a known issue? If not, any suggestions
>>>> as to how I correct this so that the original network profile
>>>> definition is retained after an edit?
>>>>
>>>>
>>>>
>>>> Many thanks,
>>>>
>>>>
>>>>
>>>> Simon
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Users mailing list
>>>> Users(a)ovirt.org
>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>
>> _______________________________________________
>> Users mailing list
>> Users(a)ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
7:19 a.m.
Hi Simon,
Thanks, sorry for the grievance you had to suffer but I'm glad all is
well now :) Do let us know of any further trouble.
Yours, Lior.
On 20/01/14 15:15, Simon Barrett wrote:
I built a new Engine Server on 3.3.2-1.el6, rebuilt my VM's and I
no longer see the issue. All is now working as expected.
Simon
-----Original Message-----
From: Simon Barrett
Sent: 08 January 2014 08:50
To: Lior Vernia; Itamar Heim
Cc: users(a)ovirt.org
Subject: RE: [Users] Network profile lost after host edit
To test this further I setup another 3.3.2-1.el6 ovirt-engine. I'm not seeing the
same problem on the new engine.
I'm going to try and move all configuration/VM's etc from the problem
ovirt-engine install to the new one to see if the problem re-appears.
I'll let you know how it goes.
Simon
-----Original Message-----
From: Lior Vernia [mailto:lvernia@redhat.com]
Sent: 08 January 2014 06:02
To: Itamar Heim
Cc: Simon Barrett; users(a)ovirt.org
Subject: Re: [Users] Network profile lost after host edit
On 07/01/14 23:16, Itamar Heim wrote:
> On 01/07/2014 08:59 AM, Lior Vernia wrote:
>> Hi Simon,
>>
>> Thank you so much for tracking this down. I'm currently immersed in
>> oVirt 3.4 feature stuff, but I just wanted to let you know I saw this
>> and am planning to take care of it; I'll take a look in a week or two
>> when things calm down.
>>
>> The bad news are, I suspect there will be no workaround other than
>> upgrading to the next version that will include the fix (likely 3.3.3).
>>
>
> is there an ovirt bug targeted to 3.3.3 tracking this?
>
I'll open one as soon as I test the issue. Unless Simon would like to pick up the
gauntlet and open one on bugzilla.redhat.com?...
>> Yours, Lior.
>>
>> On 06/01/14 12:21, Simon Barrett wrote:
>>> I am now able to reproduce the problem where network profile
>>> definitions are lost on VM edit.
>>>
>>> - Create VM
>>> - From the "Network Interfaces" tab, click on "New" and
assign the
>>> ovirtmgt profile to nic1
>>> - Edit VM, from the "nic1" drop down select another profile and
>>> click OK
>>> - Edit the same VM again and nic1 lists as <Empty>
>>>
>>> I upgraded to 3.3.2-1.el6 and still see the problem.
>>>
>>> As ever, any help is very much appreciated.
>>>
>>> Thanks,
>>>
>>> Simon
>>>
>>>
>>> -----Original Message-----
>>> From: users-bounces(a)ovirt.org [mailto:users-bounces@ovirt.org] On
>>> Behalf Of Simon Barrett
>>> Sent: 12 December 2013 21:53
>>> To: Lior Vernia
>>> Cc: users(a)ovirt.org
>>> Subject: Re: [Users] Network profile lost after host edit
>>>
>>> Lior,
>>>
>>> I'm running 3.3.1.
>>>
>>> I think it may be related to how I created the VM's. Another VM
>>> created using the blank template works fine and the network config
>>> displays correctly when I click on edit.
>>>
>>> The problem VM's were created with a different template. I'll dig a
>>> bit further to see if I can narrow it down any further.
>>>
>>> I don't have to click show advanced to exhibit the problem.
>>>
>>> Thanks for the response
>>>
>>> Simon
>>>
>>>> On 12 Dec 2013, at 16:44, "Lior Vernia"
<lvernia(a)redhat.com> wrote:
>>>>
>>>> Hi Simon,
>>>>
>>>> I apologize for the delay in my response. I've worked quite a bit
>>>> on that part of the dialog since oVirt 3.3, and while it was quite
>>>> buggy I haven't encountered this exact issue you're describing.
It
>>>> does remind me of one bug though; could it be that pressing the
>>>> "Show Advanced Options" is what triggers the strange behavior?
>>>>
>>>> What version of oVirt engine are you running? Both 3.3.1 and 3.3.2
>>>> should be quite stable as far as this dialog is concerned, so
>>>> upgrading might be a good idea.
>>>>
>>>> As for workarounds, it sounds like a GUI issue so I don't think
>>>> there's anything you can do apart from upgrading the engine.
>>>>
>>>> Yours, Lior.
>>>>
>>>>> On 11/12/13 13:40, Simon Barrett wrote:
>>>>> I have a problem where VM network profiles are lost when editing a
>>>>> host.
>>>>> E.G.
>>>>>
>>>>>
>>>>>
>>>>> * VM is running fine on the correct network. Network
>>>>> Interfaces
>>>>> tab shows "nic1" and "Network Name" shows the
correct network profile.
>>>>>
>>>>> * I shutdown the VM then right click and Edit.
>>>>>
>>>>> * The General settings for the node shows "nic1
<Empty>". If I
>>>>> then edit config, something like increasing memory or changing CPU
>>>>> cores then click on OK, the VM configuration is saved without a
>>>>> network profile.
>>>>>
>>>>> * When I boot the VM I cannot connect to it.
>>>>>
>>>>> * I then have to edit the node again configure back in the
>>>>> correct network profile.
>>>>>
>>>>>
>>>>>
>>>>> Does anyone know if this is a known issue? If not, any suggestions
>>>>> as to how I correct this so that the original network profile
>>>>> definition is retained after an edit?
>>>>>
>>>>>
>>>>>
>>>>> Many thanks,
>>>>>
>>>>>
>>>>>
>>>>> Simon
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Users mailing list
>>>>> Users(a)ovirt.org
>>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>>
>>> _______________________________________________
>>> Users mailing list
>>> Users(a)ovirt.org
>>> http://lists.ovirt.org/mailman/listinfo/users
>>>
>> _______________________________________________
>> Users mailing list
>> Users(a)ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>
>
4052
days inactive
4092
days old
11 comments
4 participants
participants (4)
-
Itamar Heim -
Lior Vernia -
Moti Asayag -
Simon Barrett