3:45 p.m.
Hi
I am trying to install oVirt Node
(ovirt-node-iso-3.0.1-1.0.2.vdsm.fc19.iso) on DELL R805 server, but every
time install fails with Exception: RunTimeError('Failed to
partition/format'). I also tried ovirt-node-iso-3.0.1-1.0.2.vdsm.el6.iso
version and the same error occures. I tried different partition sizes and I
always make sure that partitions dont exceed the total disk space. I
browsed log fails and could not find anything relevant. I am really out of
ideas...
Any advise?
Thanks
Edgars
3:59 p.m.
Hello!
Had same problem on IBM xSeries 3650. Aparently was an RAID problem (Serve
RID in my case). I had to wipe the disk, recreate the array an wait until
it was OK and only after that I manage to install.
On Mon, Oct 21, 2013 at 3:45 PM, Edgars M. <edgars.mazurs(a)gmail.com> wrote:
Hi
I am trying to install oVirt Node
(ovirt-node-iso-3.0.1-1.0.2.vdsm.fc19.iso) on DELL R805 server, but every
time install fails with Exception: RunTimeError('Failed to
partition/format'). I also tried ovirt-node-iso-3.0.1-1.0.2.vdsm.el6.iso
version and the same error occures. I tried different partition sizes and I
always make sure that partitions dont exceed the total disk space. I
browsed log fails and could not find anything relevant. I am really out of
ideas...
Any advise?
Thanks
Edgars
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
11:45 p.m.
This is a multi-part message in MIME format.
--------------080002000603000802040106
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
On 10/21/2013 08:59 AM, Gabi C wrote:
Hello!
Had same problem on IBM xSeries 3650. Aparently was an RAID problem
(Serve RID in my case). I had to wipe the disk, recreate the array an
wait until it was OK and only after that I manage to install.
On Mon, Oct 21, 2013 at 3:45 PM, Edgars M. <edgars.mazurs(a)gmail.com
<mailto:edgars.mazurs@gmail.com>> wrote:
Hi
I am trying to install oVirt Node
(ovirt-node-iso-3.0.1-1.0.2.vdsm.fc19.iso) on DELL R805 server,
but every time install fails with Exception: RunTimeError('Failed
to partition/format'). I also
tried ovirt-node-iso-3.0.1-1.0.2.vdsm.el6.iso version and the same
error occures. I tried different partition sizes and I always make
sure that partitions dont exceed the total disk space. I browsed
log fails and could not find anything relevant. I am really out of
ideas...
Any advise?
Thanks
Edgars
_______________________________________________
Users mailing list
Users(a)ovirt.org <mailto:Users@ovirt.org>
http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
Once it fails, press F2 to drop to shell. /tmp/ovirt.log
/var/log/ovirt.log and /var/log/ovirt-node.log will have the debug
messages in it. Paste those in here if you can.
--------------080002000603000802040106
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit
<html>
<head>
<meta content="text/html; charset=ISO-8859-1"
http-equiv="Content-Type">
</head>
<body text="#000000" bgcolor="#FFFFFF">
<div class="moz-cite-prefix">On 10/21/2013 08:59 AM, Gabi C
wrote:<br>
</div>
<blockquote
cite="mid:CAJcUOahQbrj2wqvDZUF0RuAV6nB28TadXDbWjSjxD+y0kzFDbQ@mail.gmail.com"
type="cite">
<div dir="ltr">
<div>Hello!<br>
<br>
</div>
Had same problem on IBM xSeries 3650. Aparently was an RAID
problem (Serve RID in my case). I had to wipe the disk, recreate
the array an wait until it was OK and only after that I manage
to install.<br>
</div>
<div class="gmail_extra"><br>
<br>
<div class="gmail_quote">On Mon, Oct 21, 2013 at 3:45 PM, Edgars
M. <span dir="ltr"><<a
moz-do-not-send="true"
href="mailto:edgars.mazurs@gmail.com"
target="_blank">edgars.mazurs(a)gmail.com</a>&gt;</span>
wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0
.8ex;border-left:1px #ccc solid;padding-left:1ex">
<div dir="ltr">Hi
<div><br>
</div>
<div>I am trying to install oVirt Node
(ovirt-node-iso-3.0.1-1.0.2.vdsm.fc19.iso) on DELL R805
server, but every time install fails with Exception:
RunTimeError('Failed to partition/format'). I also
tried ovirt-node-iso-3.0.1-1.0.2.vdsm.el6.iso version
and the same error occures. I tried different partition
sizes and I always make sure that partitions dont exceed
the total disk space. I browsed log fails and could not
find anything relevant. I am really out of ideas...</div>
<div><br>
</div>
<div>Any advise?</div>
<div><br>
</div>
<div>Thanks</div>
<span class="HOEnZb"><font color="#888888">
<div>Edgars</div>
</font></span></div>
<br>
_______________________________________________<br>
Users mailing list<br>
<a moz-do-not-send="true"
href="mailto:Users@ovirt.org">Users@ovirt.org</a><br>
<a moz-do-not-send="true"
href="http://lists.ovirt.org/mailman/listinfo/users"
target="_blank">http://lists.ovirt.org/mailman/listinfo/user...
<br>
</blockquote>
</div>
<br>
</div>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<br>
<pre wrap="">_______________________________________________
Users mailing list
<a class="moz-txt-link-abbreviated"
href="mailto:Users@ovirt.org">Users@ovirt.org</a>
<a class="moz-txt-link-freetext"
href="http://lists.ovirt.org/mailman/listinfo/users">http://...
</pre>
</blockquote>
<br>
<br>
Once it fails, press F2 to drop to shell. /tmp/ovirt.log
/var/log/ovirt.log and /var/log/ovirt-node.log will have the debug
messages in it. Paste those in here if you can.<br>
</body>
</html>
--------------080002000603000802040106--
1 a.m.
Hi, thanks for your replies..
As suggested by Gabi C, I destroyed RAID on my RAID controller, re-created
it and after that it worked.
Thanks again.
On Mon, Oct 21, 2013 at 10:45 PM, Joey Boggs <jboggs(a)redhat.com> wrote:
On 10/21/2013 08:59 AM, Gabi C wrote:
Hello!
Had same problem on IBM xSeries 3650. Aparently was an RAID problem
(Serve RID in my case). I had to wipe the disk, recreate the array an wait
until it was OK and only after that I manage to install.
On Mon, Oct 21, 2013 at 3:45 PM, Edgars M. <edgars.mazurs(a)gmail.com>wrote:
> Hi
>
> I am trying to install oVirt Node
> (ovirt-node-iso-3.0.1-1.0.2.vdsm.fc19.iso) on DELL R805 server, but every
> time install fails with Exception: RunTimeError('Failed to
> partition/format'). I also tried ovirt-node-iso-3.0.1-1.0.2.vdsm.el6.iso
> version and the same error occures. I tried different partition sizes and I
> always make sure that partitions dont exceed the total disk space. I
> browsed log fails and could not find anything relevant. I am really out of
> ideas...
>
> Any advise?
>
> Thanks
> Edgars
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>
_______________________________________________
Users mailing listUsers@ovirt.orghttp://lists.ovirt.org/mailman/listinfo/users
Once it fails, press F2 to drop to shell. /tmp/ovirt.log
/var/log/ovirt.log and /var/log/ovirt-node.log will have the debug messages
in it. Paste those in here if you can.
11:15 a.m.
Am Dienstag, den 22.10.2013, 00:00 +0200 schrieb Edgars M.:
Hi, thanks for your replies..
As suggested by Gabi C, I destroyed RAID on my RAID controller,
re-created it and after that it worked.
Hey Edgars and Gabi,
nice that both of you could solve this problem.
Could you tell what kind of raid it was? Was it a "fake raid" or a real
raid controller, and how did the raid setup look when it failed and how
did it look afterwards?
I'd like to capture these informations to nail down this problem a bit
more.
Thanks
fabian
Thanks again.
On Mon, Oct 21, 2013 at 10:45 PM, Joey Boggs <jboggs(a)redhat.com>
wrote:
On 10/21/2013 08:59 AM, Gabi C wrote:
> Hello!
>
>
> Had same problem on IBM xSeries 3650. Aparently was an RAID
> problem (Serve RID in my case). I had to wipe the disk,
> recreate the array an wait until it was OK and only after
> that I manage to install.
>
>
>
> On Mon, Oct 21, 2013 at 3:45 PM, Edgars M.
> <edgars.mazurs(a)gmail.com> wrote:
> Hi
>
>
> I am trying to install oVirt Node
> (ovirt-node-iso-3.0.1-1.0.2.vdsm.fc19.iso) on DELL
> R805 server, but every time install fails
> with Exception: RunTimeError('Failed to
> partition/format'). I also
> tried ovirt-node-iso-3.0.1-1.0.2.vdsm.el6.iso
> version and the same error occures. I tried
> different partition sizes and I always make sure
> that partitions dont exceed the total disk space. I
> browsed log fails and could not find anything
> relevant. I am really out of ideas...
>
>
> Any advise?
>
>
> Thanks
> Edgars
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>
>
>
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
Once it fails, press F2 to drop to
shell. /tmp/ovirt.log /var/log/ovirt.log
and /var/log/ovirt-node.log will have the debug messages in
it. Paste those in here if you can.
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
11:39 a.m.
Hello!
It is a real RAID controller ServeRAID 8k that comes with IBM xSeries 3650.
First I hit this problem, tryin' to upgrade from 3.2 - i.e
ovirt-node-iso-2.6.1-20120228.fc18.iso<http://resources.ovirt.org/rele...
to 3.3 - ovirt-node-iso-3.0.1-1.0.2.vdsm.fc19.iso.
<http://resources.ovirt.org/releases/3.3/iso/ovirt-node-iso-3.0.1-1.0.2.vd...
fact the message was "Error 'Failed to set install bootloader'" - see
http://lists.ovirt.org/pipermail/users/2013-September/016434.html --,
message which appear in the last styage of upgrade ( 5 out of 5).
Then I rebooted, enter the RAID setup, erase the array, reinitiliaze the
disks, recrete the array with option full - this take some time to complete
but when ready the array was available. I also tried to create the array
with "Quick" option - this option immediately create the array and made it
available to the OS but in the background RAID controller was still
creating the array i.e. some disk operations and got same error.
<http://resources.ovirt.org/releases/3.3/iso/ovirt-node-iso-3.0.1-1.0.2.vd...
On Tue, Oct 22, 2013 at 11:15 AM, Fabian Deutsch <fabiand(a)redhat.com> wrote:
Am Dienstag, den 22.10.2013, 00:00 +0200 schrieb Edgars M.:
> Hi, thanks for your replies..
>
>
> As suggested by Gabi C, I destroyed RAID on my RAID controller,
> re-created it and after that it worked.
Hey Edgars and Gabi,
nice that both of you could solve this problem.
Could you tell what kind of raid it was? Was it a "fake raid" or a real
raid controller, and how did the raid setup look when it failed and how
did it look afterwards?
I'd like to capture these informations to nail down this problem a bit
more.
Thanks
fabian
>
> Thanks again.
>
>
> On Mon, Oct 21, 2013 at 10:45 PM, Joey Boggs <jboggs(a)redhat.com>
> wrote:
> On 10/21/2013 08:59 AM, Gabi C wrote:
>
> > Hello!
> >
> >
> > Had same problem on IBM xSeries 3650. Aparently was an RAID
> > problem (Serve RID in my case). I had to wipe the disk,
> > recreate the array an wait until it was OK and only after
> > that I manage to install.
> >
> >
> >
> > On Mon, Oct 21, 2013 at 3:45 PM, Edgars M.
> > <edgars.mazurs(a)gmail.com> wrote:
> > Hi
> >
> >
> > I am trying to install oVirt Node
> > (ovirt-node-iso-3.0.1-1.0.2.vdsm.fc19.iso) on DELL
> > R805 server, but every time install fails
> > with Exception: RunTimeError('Failed to
> > partition/format'). I also
> > tried ovirt-node-iso-3.0.1-1.0.2.vdsm.el6.iso
> > version and the same error occures. I tried
> > different partition sizes and I always make sure
> > that partitions dont exceed the total disk space. I
> > browsed log fails and could not find anything
> > relevant. I am really out of ideas...
> >
> >
> > Any advise?
> >
> >
> > Thanks
> > Edgars
> >
> > _______________________________________________
> > Users mailing list
> > Users(a)ovirt.org
> > http://lists.ovirt.org/mailman/listinfo/users
> >
> >
> >
> >
> >
> > _______________________________________________
> > Users mailing list
> > Users(a)ovirt.org
> > http://lists.ovirt.org/mailman/listinfo/users
>
>
>
> Once it fails, press F2 to drop to
> shell. /tmp/ovirt.log /var/log/ovirt.log
> and /var/log/ovirt-node.log will have the debug messages in
> it. Paste those in here if you can.
>
>
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
11:41 a.m.
Hi Fabian
I am using DELL R805 server with PERC 6/i RAID controller and two SAS
disks. PERC 6/i is real hardware RAID controller (although cheap one).
First I created RAID1 and did fast initialisation. (PERC RAID controllers
has this stupid requirement that you need to initialise RAID before you can
use it). After this oVirt Node installation failed every time with "Failed
to partition/format".
Then I destroyed RAID1 and created it again, but this time I did full RAID
initialisation (instead of fast). After that oVirt Node installation went
smooth.
The thing is that I never do full initialisation when I install any OS,
because it is very slow process and can take hours and I never had any
problems with fast initialisation before. But apparently there is some
trick with oVirt Node.
From documentation:
"Fast initialization writes zeroes to the first 8 MB and to the last 8 MB
of the virtual disk so that initialization occurs in 2–3 seconds. A
progress bar displays next to the selected virtual disk as it initializes."
Whereas:
"A regular (meaning full) initialization permanently destroys any data that
already exists."
Hope that helps.
Edgars
On Tue, Oct 22, 2013 at 10:15 AM, Fabian Deutsch <fabiand(a)redhat.com> wrote:
Am Dienstag, den 22.10.2013, 00:00 +0200 schrieb Edgars M.:
> Hi, thanks for your replies..
>
>
> As suggested by Gabi C, I destroyed RAID on my RAID controller,
> re-created it and after that it worked.
Hey Edgars and Gabi,
nice that both of you could solve this problem.
Could you tell what kind of raid it was? Was it a "fake raid" or a real
raid controller, and how did the raid setup look when it failed and how
did it look afterwards?
I'd like to capture these informations to nail down this problem a bit
more.
Thanks
fabian
>
> Thanks again.
>
>
> On Mon, Oct 21, 2013 at 10:45 PM, Joey Boggs <jboggs(a)redhat.com>
> wrote:
> On 10/21/2013 08:59 AM, Gabi C wrote:
>
> > Hello!
> >
> >
> > Had same problem on IBM xSeries 3650. Aparently was an RAID
> > problem (Serve RID in my case). I had to wipe the disk,
> > recreate the array an wait until it was OK and only after
> > that I manage to install.
> >
> >
> >
> > On Mon, Oct 21, 2013 at 3:45 PM, Edgars M.
> > <edgars.mazurs(a)gmail.com> wrote:
> > Hi
> >
> >
> > I am trying to install oVirt Node
> > (ovirt-node-iso-3.0.1-1.0.2.vdsm.fc19.iso) on DELL
> > R805 server, but every time install fails
> > with Exception: RunTimeError('Failed to
> > partition/format'). I also
> > tried ovirt-node-iso-3.0.1-1.0.2.vdsm.el6.iso
> > version and the same error occures. I tried
> > different partition sizes and I always make sure
> > that partitions dont exceed the total disk space. I
> > browsed log fails and could not find anything
> > relevant. I am really out of ideas...
> >
> >
> > Any advise?
> >
> >
> > Thanks
> > Edgars
> >
> > _______________________________________________
> > Users mailing list
> > Users(a)ovirt.org
> > http://lists.ovirt.org/mailman/listinfo/users
> >
> >
> >
> >
> >
> > _______________________________________________
> > Users mailing list
> > Users(a)ovirt.org
> > http://lists.ovirt.org/mailman/listinfo/users
>
>
>
> Once it fails, press F2 to drop to
> shell. /tmp/ovirt.log /var/log/ovirt.log
> and /var/log/ovirt-node.log will have the debug messages in
> it. Paste those in here if you can.
>
>
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
4049
days inactive
4050
days old
6 comments
4 participants
participants (4)
-
Edgars M. -
Fabian Deutsch -
Gabi C -
Joey Boggs