Hi, Can you please attach the engine.log? (and maybe some screenshots from the UI?) Also, when you're trying to re-create the storage domain, does that lun appear as selectable (which maybe indicates that the domain wasn't created), or the new storage domain appears on the storage domains list so it was created? *Regards,* *Shani Leviim* On Mon, Oct 29, 2018 at 6:12 PM Tryfon Farmakakis < farmakakistryfon(a)gmail.com&gt; wrote: > Hi, I have an oVirt 4.2.6.4 installation. I added a new Centos 7.5 host > and a new, still uninitialized Data Center with shared storage. I then try > to add a new iSCSI Data Storage Domain on this Data Center and I have > selected to use the only host I have where the iSCSI target also resides, > over a local device. command 'targetcli ls' outputs: > o- / > ......................................................................................................................... > [...] > o- backstores > .............................................................................................................. > [...] > | o- block > .................................................................................................. > [Storage Objects: 0] > | o- fileio > ................................................................................................. > [Storage Objects: 0] > | o- pscsi > .................................................................................................. > [Storage Objects: 1] > | | o- vicinityvolume > ........................................................................ > [/dev/iof/vicinityvolume activated] > | | o- alua > ................................................................................................... > [ALUA Groups: 0] > | o- ramdisk > ................................................................................................ > [Storage Objects: 0] > o- iscsi > ............................................................................................................ > [Targets: 1] > | o- iqn.2015-03.com.iofabric:vicinityvolume > ........................................................................... > [TPGs: 1] > | o- tpg1 > .................................................................................................. > [gen-acls, no-auth] > | o- acls > .......................................................................................................... > [ACLs: 0] > | o- luns > .......................................................................................................... > [LUNs: 1] > | | o- lun0 > .......................................................... > [pscsi/vicinityvolume (/dev/iof/vicinityvolume) (None)] > | o- portals > .................................................................................................... > [Portals: 1] > | o- 0.0.0.0:3260 > ..................................................................................................... > [OK] > o- loopback > ......................................................................................................... > [Targets: 0] > > iSCSI target is discovered successfully, login also works but then when I > click 'OK' button nothing happens. The iSCSI initiator seems to have been > created though. Command 'iscsiadm -m session' outputs: tcp: [1] > 44.128.20.202:3260,1 iqn.2015-03.com.iofabric:vicinityvolume (non-flash) > Command 'lsblk' outputs: > NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT > sda 8:0 0 1,8T 0 disk > sdb 8:16 0 1,8T 0 disk > sdc 8:32 0 477G 0 disk > sdd 8:48 0 238,5G 0 disk > ├─sdd1 8:49 0 500M 0 part /boot > └─sdd2 8:50 0 238G 0 part > ├─centos-root 253:0 0 50G 0 lvm / > ├─centos-swap 253:1 0 15,7G 0 lvm [SWAP] > └─centos-home 253:2 0 172,2G 0 lvm /home > sde 8:64 0 3T 0 disk > sdf 8:80 0 3T 0 disk > sr0 11:0 1 1024M 0 rom > > The sde device is the original device to which the iSCSI target points > and sdf is the device created by the iSCSI initiator. > Any help would be appreciated. > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/M5ZQQWCKIBX... >

Just to clarify, after getting the 'discard after delete not supported' error message, on the bottom of that window, did you un-checked the 'Discard After Delete' box and pressed ok? Also, here's a 'how to fix' for a similar issue: https://access.redhat.com/solutions/3526901 *Regards,* *Shani Leviim* On Wed, Oct 31, 2018 at 4:19 PM Tryfon Farmakakis < farmakakistryfon(a)gmail.com&gt; wrote: > Screenshots and logs attached (I can't understand why am I getting the > "discard after delete not supported" error message since I have the > relevant checkbox unchecked) > No, the new storage domain is never created. Yes, the lun appears as > selectable. > > On Wed, Oct 31, 2018 at 11:51 AM Shani Leviim <sleviim(a)redhat.com&gt; wrote: > >> Hi, >> Can you please attach the engine.log? (and maybe some screenshots from >> the UI?) >> >> Also, when you're trying to re-create the storage domain, does that lun >> appear as selectable (which maybe indicates that the domain wasn't created), >> or the new storage domain appears on the storage domains list so it was >> created? >> >> >> *Regards,* >> >> *Shani Leviim* >> >> >> On Mon, Oct 29, 2018 at 6:12 PM Tryfon Farmakakis < >> farmakakistryfon(a)gmail.com&gt; wrote: >> >>> Hi, I have an oVirt 4.2.6.4 installation. I added a new Centos 7.5 host >>> and a new, still uninitialized Data Center with shared storage. I then try >>> to add a new iSCSI Data Storage Domain on this Data Center and I have >>> selected to use the only host I have where the iSCSI target also resides, >>> over a local device. command 'targetcli ls' outputs: >>> o- / >>> ......................................................................................................................... >>> [...] >>> o- backstores >>> .............................................................................................................. >>> [...] >>> | o- block >>> .................................................................................................. >>> [Storage Objects: 0] >>> | o- fileio >>> ................................................................................................. >>> [Storage Objects: 0] >>> | o- pscsi >>> .................................................................................................. >>> [Storage Objects: 1] >>> | | o- vicinityvolume >>> ........................................................................ >>> [/dev/iof/vicinityvolume activated] >>> | | o- alua >>> ................................................................................................... >>> [ALUA Groups: 0] >>> | o- ramdisk >>> ................................................................................................ >>> [Storage Objects: 0] >>> o- iscsi >>> ............................................................................................................ >>> [Targets: 1] >>> | o- iqn.2015-03.com.iofabric:vicinityvolume >>> ........................................................................... >>> [TPGs: 1] >>> | o- tpg1 >>> .................................................................................................. >>> [gen-acls, no-auth] >>> | o- acls >>> .......................................................................................................... >>> [ACLs: 0] >>> | o- luns >>> .......................................................................................................... >>> [LUNs: 1] >>> | | o- lun0 >>> .......................................................... >>> [pscsi/vicinityvolume (/dev/iof/vicinityvolume) (None)] >>> | o- portals >>> .................................................................................................... >>> [Portals: 1] >>> | o- 0.0.0.0:3260 >>> ..................................................................................................... >>> [OK] >>> o- loopback >>> ......................................................................................................... >>> [Targets: 0] >>> >>> iSCSI target is discovered successfully, login also works but then when >>> I click 'OK' button nothing happens. The iSCSI initiator seems to have been >>> created though. Command 'iscsiadm -m session' outputs: tcp: [1] >>> 44.128.20.202:3260,1 iqn.2015-03.com.iofabric:vicinityvolume >>> (non-flash) >>> Command 'lsblk' outputs: >>> NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT >>> sda 8:0 0 1,8T 0 disk >>> sdb 8:16 0 1,8T 0 disk >>> sdc 8:32 0 477G 0 disk >>> sdd 8:48 0 238,5G 0 disk >>> ├─sdd1 8:49 0 500M 0 part /boot >>> └─sdd2 8:50 0 238G 0 part >>> ├─centos-root 253:0 0 50G 0 lvm / >>> ├─centos-swap 253:1 0 15,7G 0 lvm [SWAP] >>> └─centos-home 253:2 0 172,2G 0 lvm /home >>> sde 8:64 0 3T 0 disk >>> sdf 8:80 0 3T 0 disk >>> sr0 11:0 1 1024M 0 rom >>> >>> The sde device is the original device to which the iSCSI target points >>> and sdf is the device created by the iSCSI initiator. >>> Any help would be appreciated. >>> _______________________________________________ >>> Users mailing list -- users(a)ovirt.org >>> To unsubscribe send an email to users-leave(a)ovirt.org >>> Privacy Statement: https://www.ovirt.org/site/privacy-policy/ >>> oVirt Code of Conduct: >>> https://www.ovirt.org/community/about/community-guidelines/ >>> List Archives: >>> https://lists.ovirt.org/archives/list/users@ovirt.org/message/M5ZQQWCKIBX... >>> >>