3:45 p.m.
New subject: [ANN] oVirt 3.5 GA Releases
the second one I am not so sure if it is an bug or a feature?
The numa menu is grayed if the VM is HA.
If one remove the HA and force set VM to run on single node without
migration flag, then numa flag is editable so you can change to
"interleave" mode.
On Mon, Oct 20, 2014 at 2:23 PM, Itamar Heim <iheim(a)redhat.com> wrote:
On Oct 20, 2014 8:08 AM, Arman Khalatyan <arm2arm(a)gmail.com> wrote:
>
> I did not play anything. I had before Ovirt 3.4.4 up and running.
> After upgrade I got 2 problems:
> 1) disk profiles are empty
> 2) numa box by default is preferred- grayed.
> a.
Then please open an urgent bug. Well. Two. One for each.
>
> On Mon, Oct 20, 2014 at 1:42 PM, Itamar Heim <iheim(a)redhat.com> wrote:
>>
>> On 10/20/2014 05:56 AM, Arman Khalatyan wrote:
>>>
>>> My bad!!
>>> False Alarm.everything is working after some massaging:)
>>> 1) start VM get error: error NUMA memory tuning in 'preferred' mode
only
>>> supports single node
>>> 2) stop VM edit properties:
>>> 2.a)- edit->host->Start Running on->specific host
>>> 2.b)- edit->host->Migration options->do not allow migration
>>> 2.c)- edit->host->ConfigureNuma->tune mode->interleave
>>> Run VM and enjoy.
>>
>>
>> but did you play with the numa definition or this happened on its own
as part of the upgrade?
>>
>>> done!
>>>
>>>
>>> On Mon, Oct 20, 2014 at 11:44 AM, Arman Khalatyan <arm2arm(a)gmail.com
>>> <mailto:arm2arm@gmail.com>> wrote:
>>>
>>> My upgrade went well no problems.
>>> Unfortuneatly I am not able to run any VM on Intel Hosts.
>>> It throws an error: Exit message: internal error internal error
NUMA
>>> memory tuning in 'preferred' mode only supports single node.
>>> I cannot edit numa menu it is disabled on the VM.
>>> thanks,
>>> Arman.
>>>
>>>
>>> On Mon, Oct 20, 2014 at 10:50 AM, Sandro Bonazzola
>>> <sbonazzo(a)redhat.com <mailto:sbonazzo@redhat.com>> wrote:
>>>
>>> Il 20/10/2014 10:13, Tiemen Ruiten ha scritto:
>>> > Hello,
>>> >
>>> > Last week I upgraded to 3.5 and on the engine side
everything went absolutely fine. Now I'm wondering what to do about my
hosts (full CentOS 6
>>> > installs). Is the upgrade something the engine takes care of
when I set the compatibility version to 3.5? Or should I install the
ovirt-release35 rpm
>>> > and run yum update on all hosts?
>>> >
>>> > Should I expect impact on running VM's, eg. from
restarting
vdsm?
>>>
>>>
>>> Looks like we have a documentation gap here.
>>> I tried to search the oVirt site for pointing you to a section
>>> describing how to upgrade hosts but did not found one.
>>>
>>> I think that we need to finish
>>> http://www.ovirt.org/DraftInstallationGuide
>>> and probably prepare an upgrade guide too.
>>>
>>> You'll need to install the ovirt-release35 rpm on your hosts
>>> since the engine is not able to add the new repository (yet?
>>> maybe an RFE on this should
>>> be filled for easing the upgrade process of the hosts).
>>>
>>> >
>>> > On 20 October 2014 08:48, Sandro Bonazzola
>>> <sbonazzo(a)redhat.com <mailto:sbonazzo@redhat.com>
>>> <mailto:sbonazzo@redhat.com
<mailto:sbonazzo@redhat.com>>>
wrote:
>>> >
>>> > Il 19/10/2014 16:53, Daniel Helgenberger ha scritto:
>>> > > Congratulations! Hope you could get your party.
>>> > >
>>> > > Sandro, as I know you always like to hear things
like
this:
>>> > > I just upgraded my oVirt 3.4.4 installation to 3.5
and
>>> everything went
>>> > > really well (apart from some package siging / deps;
but
>>> these are really
>>> > > not your issues).
>>> >
>>> > I really like when someone report everything goes fine
:-)
>>> >
>>> > >
>>> > > Tomorrow I start checking out the new stuff.
>>> > >
>>> > > Thank you! I really appreciate the work you do.
>>> > >
>>> > > Daniel
>>> > >
>>> > > On 17.10.2014 14:46, Sandro Bonazzola wrote:
>>> > >> The oVirt Project is pleased to announce the
general
>>> availability of its sixth formal release, oVirt 3.5, as of
>>> October 17, 2014.
>>> > >>
>>> > >> oVirt is an open source alternative to VMware
vSphere,
>>> and provides an excellent KVM management interface for
>>> multi-node virtualization. oVirt is
>>> > >> available now for Fedora 19, Fedora 20, Red Hat
>>> Enterprise Linux 6.5, and CentOS 6.5 (or similar) and allow you
>>> to use Red Hat Enterprise Linux
>>> > 7 and
>>> > >> CentOS 7 too as node and for running Hosted
Engine.
>>> > >>
>>> > >> New features include:
>>> > >>
>>> > >> Live Merge
>>> > >> ----------
>>> > >> If an image has one or more snapshots, oVirt
3.5's
>>> merge command will combine the data of one volume into another.
>>> Live merges can be performed
>>> > with
>>> > >> data is pulled from one snapshot into another
>>> snapshot. The engine can merge multiple disks at the same time
>>> and each merge can independently
>>> > fail or
>>> > >> succeed in each operation.
>>> > >> Import Storage Domain
>>> > >>
>>> > >> This latest release expands oVirt's feature
of
>>> importing ISOs and exporting storage domains to expand support
>>> for importing an existing data
>>> > storage
>>> > >> domain. Based on information stored in the
storage
>>> domain, oVirt can revive entities such as disks, virtual
>>> machines, and templates in the setup of
>>> > >> any data center to which the storage domain is
attached.
>>> > >>
>>> > >>
>>> > >> Advanced Foreman Integration
>>> > >> ----------------------------
>>> > >> oVirt 3.5 adds the capability to provision and
add
>>> hypervisors to oVirt from bare metal. Foreman is a complete
>>> lifecycle management tool for
>>> > physical
>>> > >> and virtual servers. Through deep integration
with
>>> configuration management, DHCP, DNS, TFTP, and PXE-based
>>> unattended installations, Foreman
>>> > manages
>>> > >> every stage of the lifecycle of your physical or
>>> virtual servers. Integrating Foreman with oVirt helps add
>>> hypervisor hosts managed by Foreman
>>> > to the
>>> > >> oVirt engine.
>>> > >>
>>> > >>
>>> > >> Enhanced Authentication, Authorization and
Accounting
>>> Support
>>> > >>
>>> -------------------------------------------------------------
>>> > >> A new architecture has been built for oVirt
3.5's
>>> authentication, authorization and accounting (AAA) system. The
>>> enhancements will provide a clear
>>> > >> separation of authentication from authorization
and
>>> provide a developer API to develop custom extensions for
>>> authentication and authorization.
>>> > >>
>>> > >>
>>> > >> New PatternFly Interface
>>> > >> ------------------------
>>> > >> oVirt 3.5 will have a new look and feel, using
>>> PatternFly, the open interface project. The new look and feel
>>> aims to maintain the colors and spirit
>>> > >> associated with oVirt, while updating it with a
new,
>>> modern, sleek, and minimal look. The minimal design allows
>>> complex screens to look cleaner and
>>> > >> airier, and lets the user focus on the data and
the
>>> tasks by removing all extraneous visual elements.
>>> > >>
>>> > >>
>>> > >> Advanced Scheduling with Optaplanner
>>> > >> ------------------------------------
>>> > >> The Optaplanner is a new service that takes a
snapshot
>>> of a cluster (a list of hosts and VMs) and computes an
optimized
>>> VM-to-Host assignment
>>> > >> solution. Optimization will is done on per
Cluster
>>> basis. The administrator can use this information as a hint to
>>> tweak the cluster to better
>>> > utilize
>>> > >> resources.
>>> > >>
>>> > >>
>>> > >>
>>> > >> This release of oVirt also includes numerous bug
>>> fixes. See the release notes [1] for a complete list of the new
>>> features and bugs fixed.
>>> > >>
>>> > >> A new repository has been created and will be
>>> automatically enabled by installing / upgrading ovirt-release35
>>> package.
>>> > >> See release notes page for further instructions
about
>>> install / upgrade.
>>> > >>
>>> > >> A new oVirt Live iso is also available [2] and a
new
>>> oVirt Node iso will be available soon.
>>> > >>
>>> > >> [1] http://www.ovirt.org/OVirt_3.5_Release_Notes
>>> > >> [2]
>>>
http://resources.ovirt.org/pub/ovirt-3.5/iso/ovirt-live-el6-3.5.0.iso
>>> > >>
>>> > >
>>> >
>>> >
>>> > --
>>> > Sandro Bonazzola
>>> > Better technology. Faster innovation. Powered by
>>> community collaboration.
>>> > See how it works at redhat.com <http://redhat.com>
>>> <http://redhat.com>
>>> > _______________________________________________
>>> > Users mailing list
>>> > Users(a)ovirt.org <mailto:Users@ovirt.org>
>>> <mailto:Users@ovirt.org <mailto:Users@ovirt.org>>
>>> > http://lists.ovirt.org/mailman/listinfo/users
>>> >
>>> >
>>> >
>>> >
>>> > --
>>> > Tiemen Ruiten
>>> > Systems Engineer
>>> > R&D Media
>>>
>>>
>>> --
>>> Sandro Bonazzola
>>> Better technology. Faster innovation. Powered by community
>>> collaboration.
>>> See how it works at redhat.com <http://redhat.com>
>>> _______________________________________________
>>> Users mailing list
>>> Users(a)ovirt.org <mailto:Users@ovirt.org>
>>> http://lists.ovirt.org/mailman/listinfo/users
>>>
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> Users mailing list
>>> Users(a)ovirt.org
>>> http://lists.ovirt.org/mailman/listinfo/users
>>>
>>
>
3:51 p.m.
New subject: [ANN] oVirt 3.5 GA Releases
----- Original Message -----
From: "Arman Khalatyan" <arm2arm(a)gmail.com>
To: "Itamar Heim" <iheim(a)redhat.com>
Cc: "users" <users(a)ovirt.org>, "Allon Mureinik"
<amureini(a)redhat.com>, "Doron Fediuck" <dfediuck(a)redhat.com>,
mskrivan(a)redhat.com
Sent: Monday, October 20, 2014 3:45:46 PM
Subject: Re: [ovirt-users] [ANN] oVirt 3.5 GA Releases
the second one I am not so sure if it is an bug or a feature?
The numa menu is grayed if the VM is HA.
If one remove the HA and force set VM to run on single node without
migration flag, then numa flag is editable so you can change to
"interleave" mode.
I believe there's a fix coming for it in 3.5.1. One thing is for sure-
proffered should not be used as a default.
So go ahead and open a BZ for it, and we'll see if we still need to
fix something or have it resolved already and provide the info.
On Mon, Oct 20, 2014 at 2:23 PM, Itamar Heim <iheim(a)redhat.com> wrote:
>
> On Oct 20, 2014 8:08 AM, Arman Khalatyan <arm2arm(a)gmail.com> wrote:
> >
> > I did not play anything. I had before Ovirt 3.4.4 up and running.
> > After upgrade I got 2 problems:
> > 1) disk profiles are empty
> > 2) numa box by default is preferred- grayed.
> > a.
>
> Then please open an urgent bug. Well. Two. One for each.
>
> >
> > On Mon, Oct 20, 2014 at 1:42 PM, Itamar Heim <iheim(a)redhat.com> wrote:
> >>
> >> On 10/20/2014 05:56 AM, Arman Khalatyan wrote:
> >>>
> >>> My bad!!
> >>> False Alarm.everything is working after some massaging:)
> >>> 1) start VM get error: error NUMA memory tuning in 'preferred'
mode
> only
> >>> supports single node
> >>> 2) stop VM edit properties:
> >>> 2.a)- edit->host->Start Running on->specific host
> >>> 2.b)- edit->host->Migration options->do not allow migration
> >>> 2.c)- edit->host->ConfigureNuma->tune mode->interleave
> >>> Run VM and enjoy.
> >>
> >>
> >> but did you play with the numa definition or this happened on its own
> as part of the upgrade?
> >>
> >>> done!
> >>>
> >>>
> >>> On Mon, Oct 20, 2014 at 11:44 AM, Arman Khalatyan
<arm2arm(a)gmail.com
> >>> <mailto:arm2arm@gmail.com>> wrote:
> >>>
> >>> My upgrade went well no problems.
> >>> Unfortuneatly I am not able to run any VM on Intel Hosts.
> >>> It throws an error: Exit message: internal error internal error
> NUMA
> >>> memory tuning in 'preferred' mode only supports single
node.
> >>> I cannot edit numa menu it is disabled on the VM.
> >>> thanks,
> >>> Arman.
> >>>
> >>>
> >>> On Mon, Oct 20, 2014 at 10:50 AM, Sandro Bonazzola
> >>> <sbonazzo(a)redhat.com <mailto:sbonazzo@redhat.com>>
wrote:
> >>>
> >>> Il 20/10/2014 10:13, Tiemen Ruiten ha scritto:
> >>> > Hello,
> >>> >
> >>> > Last week I upgraded to 3.5 and on the engine side
> everything went absolutely fine. Now I'm wondering what to do about my
> hosts (full CentOS 6
> >>> > installs). Is the upgrade something the engine takes care
of
> when I set the compatibility version to 3.5? Or should I install the
> ovirt-release35 rpm
> >>> > and run yum update on all hosts?
> >>> >
> >>> > Should I expect impact on running VM's, eg. from
restarting
> vdsm?
> >>>
> >>>
> >>> Looks like we have a documentation gap here.
> >>> I tried to search the oVirt site for pointing you to a section
> >>> describing how to upgrade hosts but did not found one.
> >>>
> >>> I think that we need to finish
> >>> http://www.ovirt.org/DraftInstallationGuide
> >>> and probably prepare an upgrade guide too.
> >>>
> >>> You'll need to install the ovirt-release35 rpm on your
hosts
> >>> since the engine is not able to add the new repository (yet?
> >>> maybe an RFE on this should
> >>> be filled for easing the upgrade process of the hosts).
> >>>
> >>> >
> >>> > On 20 October 2014 08:48, Sandro Bonazzola
> >>> <sbonazzo(a)redhat.com <mailto:sbonazzo@redhat.com>
> >>> <mailto:sbonazzo@redhat.com
<mailto:sbonazzo@redhat.com>>>
> wrote:
> >>> >
> >>> > Il 19/10/2014 16:53, Daniel Helgenberger ha scritto:
> >>> > > Congratulations! Hope you could get your party.
> >>> > >
> >>> > > Sandro, as I know you always like to hear things
like
> this:
> >>> > > I just upgraded my oVirt 3.4.4 installation to
3.5 and
> >>> everything went
> >>> > > really well (apart from some package siging /
deps;
> but
> >>> these are really
> >>> > > not your issues).
> >>> >
> >>> > I really like when someone report everything goes
fine
> :-)
> >>> >
> >>> > >
> >>> > > Tomorrow I start checking out the new stuff.
> >>> > >
> >>> > > Thank you! I really appreciate the work you do.
> >>> > >
> >>> > > Daniel
> >>> > >
> >>> > > On 17.10.2014 14:46, Sandro Bonazzola wrote:
> >>> > >> The oVirt Project is pleased to announce the
general
> >>> availability of its sixth formal release, oVirt 3.5, as of
> >>> October 17, 2014.
> >>> > >>
> >>> > >> oVirt is an open source alternative to
VMware
> vSphere,
> >>> and provides an excellent KVM management interface for
> >>> multi-node virtualization. oVirt is
> >>> > >> available now for Fedora 19, Fedora 20, Red
Hat
> >>> Enterprise Linux 6.5, and CentOS 6.5 (or similar) and allow
you
> >>> to use Red Hat Enterprise Linux
> >>> > 7 and
> >>> > >> CentOS 7 too as node and for running Hosted
Engine.
> >>> > >>
> >>> > >> New features include:
> >>> > >>
> >>> > >> Live Merge
> >>> > >> ----------
> >>> > >> If an image has one or more snapshots, oVirt
3.5's
> >>> merge command will combine the data of one volume into
another.
> >>> Live merges can be performed
> >>> > with
> >>> > >> data is pulled from one snapshot into
another
> >>> snapshot. The engine can merge multiple disks at the same time
> >>> and each merge can independently
> >>> > fail or
> >>> > >> succeed in each operation.
> >>> > >> Import Storage Domain
> >>> > >>
> >>> > >> This latest release expands oVirt's
feature of
> >>> importing ISOs and exporting storage domains to expand support
> >>> for importing an existing data
> >>> > storage
> >>> > >> domain. Based on information stored in the
storage
> >>> domain, oVirt can revive entities such as disks, virtual
> >>> machines, and templates in the setup of
> >>> > >> any data center to which the storage domain
is
> attached.
> >>> > >>
> >>> > >>
> >>> > >> Advanced Foreman Integration
> >>> > >> ----------------------------
> >>> > >> oVirt 3.5 adds the capability to provision
and add
> >>> hypervisors to oVirt from bare metal. Foreman is a complete
> >>> lifecycle management tool for
> >>> > physical
> >>> > >> and virtual servers. Through deep
integration with
> >>> configuration management, DHCP, DNS, TFTP, and PXE-based
> >>> unattended installations, Foreman
> >>> > manages
> >>> > >> every stage of the lifecycle of your
physical or
> >>> virtual servers. Integrating Foreman with oVirt helps add
> >>> hypervisor hosts managed by Foreman
> >>> > to the
> >>> > >> oVirt engine.
> >>> > >>
> >>> > >>
> >>> > >> Enhanced Authentication, Authorization and
Accounting
> >>> Support
> >>> > >>
> >>> -------------------------------------------------------------
> >>> > >> A new architecture has been built for oVirt
3.5's
> >>> authentication, authorization and accounting (AAA) system. The
> >>> enhancements will provide a clear
> >>> > >> separation of authentication from
authorization and
> >>> provide a developer API to develop custom extensions for
> >>> authentication and authorization.
> >>> > >>
> >>> > >>
> >>> > >> New PatternFly Interface
> >>> > >> ------------------------
> >>> > >> oVirt 3.5 will have a new look and feel,
using
> >>> PatternFly, the open interface project. The new look and feel
> >>> aims to maintain the colors and spirit
> >>> > >> associated with oVirt, while updating it
with a new,
> >>> modern, sleek, and minimal look. The minimal design allows
> >>> complex screens to look cleaner and
> >>> > >> airier, and lets the user focus on the data
and the
> >>> tasks by removing all extraneous visual elements.
> >>> > >>
> >>> > >>
> >>> > >> Advanced Scheduling with Optaplanner
> >>> > >> ------------------------------------
> >>> > >> The Optaplanner is a new service that takes
a
> snapshot
> >>> of a cluster (a list of hosts and VMs) and computes an
> optimized
> >>> VM-to-Host assignment
> >>> > >> solution. Optimization will is done on per
Cluster
> >>> basis. The administrator can use this information as a hint to
> >>> tweak the cluster to better
> >>> > utilize
> >>> > >> resources.
> >>> > >>
> >>> > >>
> >>> > >>
> >>> > >> This release of oVirt also includes numerous
bug
> >>> fixes. See the release notes [1] for a complete list of the
new
> >>> features and bugs fixed.
> >>> > >>
> >>> > >> A new repository has been created and will
be
> >>> automatically enabled by installing / upgrading
ovirt-release35
> >>> package.
> >>> > >> See release notes page for further
instructions about
> >>> install / upgrade.
> >>> > >>
> >>> > >> A new oVirt Live iso is also available [2]
and a new
> >>> oVirt Node iso will be available soon.
> >>> > >>
> >>> > >> [1]
http://www.ovirt.org/OVirt_3.5_Release_Notes
> >>> > >> [2]
> >>>
> http://resources.ovirt.org/pub/ovirt-3.5/iso/ovirt-live-el6-3.5.0.iso
> >>> > >>
> >>> > >
> >>> >
> >>> >
> >>> > --
> >>> > Sandro Bonazzola
> >>> > Better technology. Faster innovation. Powered by
> >>> community collaboration.
> >>> > See how it works at redhat.com
<http://redhat.com>
> >>> <http://redhat.com>
> >>> > _______________________________________________
> >>> > Users mailing list
> >>> > Users(a)ovirt.org <mailto:Users@ovirt.org>
> >>> <mailto:Users@ovirt.org <mailto:Users@ovirt.org>>
> >>> > http://lists.ovirt.org/mailman/listinfo/users
> >>> >
> >>> >
> >>> >
> >>> >
> >>> > --
> >>> > Tiemen Ruiten
> >>> > Systems Engineer
> >>> > R&D Media
> >>>
> >>>
> >>> --
> >>> Sandro Bonazzola
> >>> Better technology. Faster innovation. Powered by community
> >>> collaboration.
> >>> See how it works at redhat.com <http://redhat.com>
> >>> _______________________________________________
> >>> Users mailing list
> >>> Users(a)ovirt.org <mailto:Users@ovirt.org>
> >>> http://lists.ovirt.org/mailman/listinfo/users
> >>>
> >>>
> >>>
> >>>
> >>>
> >>> _______________________________________________
> >>> Users mailing list
> >>> Users(a)ovirt.org
> >>> http://lists.ovirt.org/mailman/listinfo/users
> >>>
> >>
> >
>
3686
days inactive
3686
days old
2 comments
3 participants
participants (3)
-
Arman Khalatyan -
Doron Fediuck -
Itamar Heim