3:08 a.m.
Hey Gervais,
Try enabling NetworkManager and firewalld before doing the
hosted-engine --deploy. I have run into problems with oVirt trying to
perform tasks on hosts where firewalld is disabled, so maybe you are
running into a similar problem. Also, I think the setup script will
disable NetworkManager if it needs to. I know I didn't manually disable
it on any of the boxes I installed on.
On 16-05-12 04:49 PM, users-request(a)ovirt.org wrote:
Message: 1
Date: Thu, 12 May 2016 14:22:12 -0300
From: Gervais de Montbrun <gervais(a)demontbrun.com>
To: Wee Sritippho <wee.s(a)forest.go.th>
Cc: users <users(a)ovirt.org>
Subject: Re: [ovirt-users] Adding another host to my cluster
Message-ID: <28B7FC74-5C52-4F60-B9F3-39A36621A7CA(a)demontbrun.com>
Content-Type: text/plain; charset="utf-8"
Hi Wee
(and others)
Thanks for the reply. I tried what you suggested, but I am in the exact same state. :-(
I don't want to completely remove my hosted engine setup as it is working on the two
other hosts in my cluster. I did not run the rm -rf stes listed here
(https://www.ovirt.org/documentation/how-to/hosted-engine/#recoving-from-f...
<https://www.ovirt.org/documentation/how-to/hosted-engine/#recoving-from-f...>)
that would wipe my hosted_engine nfs mount. If you know that this is 100% necessary,
please let me know.
I did:
hosted-engine --clean-metadata --force-cleanup --host-id=3
run the bash script to remove all of the ovirt packages and config files
reinstalled ovirt-hosted-engine-setup
ran "hosted-engine --deploy"
I'm back exactly where I started. Is there a way to run just the network
configuration part of the deploy?
Since the last attempt, I did upgrade my hosted engine and my cluster is now running
oVirt 3.6.5.
Cheers,
Gervais
> On May 12, 2016, at 11:50 AM, Wee Sritippho <wee.s(a)forest.go.th> wrote:
>
> Hi,
>
> I used to have a similar problem where one of my host can't be deployed due to
the absence of ovirtmgmt bridge. Simone said it's a bug (
https://bugzilla.redhat.com/1323465 <https://bugzilla.redhat.com/1323465> ) which
would be fixed in 3.6.6.
>
> This is what I've done to solve it:
>
> 1. In the web UI, set the failed host to maintenance.
> 2. Remove it.
> 3. In that host, run a script from
https://www.ovirt.org/documentation/how-to/hosted-engine/#recoving-from-f...
<https://www.ovirt.org/documentation/how-to/hosted-engine/#recoving-from-f...
> 4. Install ovirt-hosted-engine-setup again.
> 5. Redeploy again.
>
> Hope that helps
>
> On 11 ??????? 2016 22 ?????? 48 ???? 58 ?????? GMT+07:00, Gervais de Montbrun
<gervais(a)demontbrun.com> wrote:
> Hi Folks,
>
> I hate to reply to my own message, but I'm really hoping someone can help me with
my issue
> http://lists.ovirt.org/pipermail/users/2016-May/039690.html
<http://lists.ovirt.org/pipermail/users/2016-May/039690.html>
>
> Does anyone have a suggestion for me? If there is any more information that I can
provide that would help you to help me, please advise.
>
> Cheers,
> Gervais
>
>
>
>> On May 9, 2016, at 1:42 PM, Gervais de Montbrun <gervais(a)demontbrun.com
<mailto:gervais@demontbrun.com>> wrote:
>>
>> Hi All,
>>
>> I'm trying to add a third host into my oVirt cluster. I have hosted engine
setup on the first two. It's failing to finish the hosted-engine --deploy on this
third host. I wiped the server and did a CentOS 7 minimum install and ran it again to have
a clean machine.
>>
>> My setup:
>> CentOS 7 clean install
>> yum install -y http://resources.ovirt.org/pub/yum-repo/ovirt-release36.rpm
<http://resources.ovirt.org/pub/yum-repo/ovirt-release36.rpm>
>> yum install -y ovirt-hosted-engine-setup
>> yum upgrade -y && reboot
>> systemctl disable NetworkManager ; systemctl stop NetworkManager ; systemctl
disable firewalld ; systemctl stop firewalld
>> hosted-engine --deploy
>>
>> hosted-engine --deploy always throws an error:
>> [ ERROR ] The VDSM host was found in a failed state. Please check engine and
bootstrap installation logs.
>> [ ERROR ] Unable to add Cultivar2 to the manager
>> and then echo's
>> [ INFO ] Waiting for VDSM hardware info
>> ...
>> [ ERROR ] Failed to execute stage 'Closing up': VDSM did not start within
120 seconds
>> [ INFO ] Stage: Clean up
>> [ INFO ] Generating answer file
'/var/lib/ovirt-hosted-engine-setup/answers/answers-20160509131103.conf'
>> [ INFO ] Stage: Pre-termination
>> [ INFO ] Stage: Termination
>> [ ERROR ] Hosted Engine deployment failed: this system is not reliable, please
check the issue, fix and redeploy
>> Log file is located at
/var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20160509130658-qb8ev0.log
>>
>> Full output of hosted-engine --deploy included in the attached zip file.
>> I've also included vdsm.log (There is more than one tries worth of tries in
there).
>> You'll also find the ovirt-hosted-engine-setup-20160509130658-qb8ev0.log
listed above.
>>
>> This is my "test" setup. Cultivar0 is my first host and my nfs server
for storage. I have two hosts in the setup already and everything is working fine. The
host does show up in the oVirt admin, but shows "Installed Failed"
>> <PastedGraphic-1.png>
>>
>> Trying to reinstall from within the interface just fails again.
>>
>> The ovirt bridge interface is not configured and there are no config files in
/etc/sysconfi/network-scripts related to ovirt.
>>
>> OS:
>> [root@cultivar2 ovirt-hosted-engine-setup]# cat /etc/redhat-release
>> CentOS Linux release 7.2.1511 (Core)
>>
>> [root@cultivar2 ovirt-hosted-engine-setup]# uname -a
>> Linux cultivar2.grove.silverorange.com
<http://cultivar2.grove.silverorange.com/> 3.10.0-327.13.1.el7.x86_64 #1 SMP Thu Mar
31 16:04:38 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux
>>
>> Versions:
>> [root@cultivar2 ovirt-hosted-engine-setup]# rpm -qa | grep -i ovirt
>> libgovirt-0.3.3-1.el7_2.1.x86_64
>> ovirt-hosted-engine-setup-1.3.5.0-1.1.el7.noarch
>> ovirt-host-deploy-1.4.1-1.el7.centos.noarch
>> ovirt-vmconsole-1.0.0-1.el7.centos.noarch
>> ovirt-vmconsole-host-1.0.0-1.el7.centos.noarch
>> ovirt-release36-007-1.noarch
>> ovirt-engine-sdk-python-3.6.5.0-1.el7.centos.noarch
>> ovirt-setup-lib-1.0.1-1.el7.centos.noarch
>> ovirt-hosted-engine-ha-1.3.5.3-1.1.el7.noarch
>> [root@cultivar2 ovirt-hosted-engine-setup]#
>> [root@cultivar2 ovirt-hosted-engine-setup]#
>> [root@cultivar2 ovirt-hosted-engine-setup]#
>> [root@cultivar2 ovirt-hosted-engine-setup]# rpm -qa | grep -i virt
>> libvirt-daemon-driver-secret-1.2.17-13.el7_2.4.x86_64
>> virt-viewer-2.0-6.el7.x86_64
>> libgovirt-0.3.3-1.el7_2.1.x86_64
>> libvirt-daemon-kvm-1.2.17-13.el7_2.4.x86_64
>> ovirt-hosted-engine-setup-1.3.5.0-1.1.el7.noarch
>> fence-virt-0.3.2-2.el7.x86_64
>> virt-what-1.13-6.el7.x86_64
>> libvirt-python-1.2.17-2.el7.x86_64
>> libvirt-daemon-1.2.17-13.el7_2.4.x86_64
>> libvirt-daemon-config-nwfilter-1.2.17-13.el7_2.4.x86_64
>> libvirt-lock-sanlock-1.2.17-13.el7_2.4.x86_64
>> libvirt-daemon-driver-nodedev-1.2.17-13.el7_2.4.x86_64
>> libvirt-daemon-driver-network-1.2.17-13.el7_2.4.x86_64
>> libvirt-daemon-driver-storage-1.2.17-13.el7_2.4.x86_64
>> ovirt-host-deploy-1.4.1-1.el7.centos.noarch
>> virt-v2v-1.28.1-1.55.el7.centos.2.x86_64
>> ovirt-vmconsole-1.0.0-1.el7.centos.noarch
>> ovirt-vmconsole-host-1.0.0-1.el7.centos.noarch
>> libvirt-client-1.2.17-13.el7_2.4.x86_64
>> libvirt-daemon-driver-nwfilter-1.2.17-13.el7_2.4.x86_64
>> ovirt-release36-007-1.noarch
>> libvirt-daemon-driver-interface-1.2.17-13.el7_2.4.x86_64
>> libvirt-daemon-driver-qemu-1.2.17-13.el7_2.4.x86_64
>> ovirt-engine-sdk-python-3.6.5.0-1.el7.centos.noarch
>> ovirt-setup-lib-1.0.1-1.el7.centos.noarch
>> ovirt-hosted-engine-ha-1.3.5.3-1.1.el7.noarch
>>
>> I also have a series of stuck tasks that I can't clear related to the host
that can't be added... This is a secondary issue and I don't want to get off
track, but they look like this:
>> <PastedGraphic-2.png>
>>
>> I'd appreciate any help that can be offered.
>>
>> Cheers,
>> Gervais
>>
>>
>> Gervais de Montbrun
>> Systems Administrator / silverorange Inc.
>>
>> Phone +1 902 367 4532 ext. 104 <tel:+1 902
367 4532 ext. 104>
>> Mobile +1 902 978 0009 <tel:+1 902 978
0009>
>>
>> <hosted-engine--deploy-logs.zip>
>
>
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
<http://lists.ovirt.org/mailman/listinfo/users>
>
> --
> Wee
4:24 a.m.
New subject: Adding another host to my cluster
Hi Charles,
Thanks for the suggestion.
I cleaned up again using the bash script from the
recoving-from-failed-install link below, then reinstalled (yum install
ovirt-hosted-engine-setup).
I enabled NetworkManager and firewalld as you suggested. The install stops
very early on with an error:
[ ERROR ] Failed to execute stage 'Programs detection': hosted-engine
cannot be deployed while NetworkManager is running, please stop and disable
it before proceeding
I disabled and stopped NetworkManager and tried again. Same result. :(
Any more guesses?
Cheers,
Gervais
On May 12, 2016, at 9:08 PM, Charles Tassell <ctassell(a)gmail.com> wrote:
Hey Gervais,
Try enabling NetworkManager and firewalld before doing the hosted-engine
--deploy. I have run into problems with oVirt trying to perform tasks on
hosts where firewalld is disabled, so maybe you are running into a similar
problem. Also, I think the setup script will disable NetworkManager if it
needs to. I know I didn't manually disable it on any of the boxes I
installed on.
On 16-05-12 04:49 PM, users-request(a)ovirt.org wrote:
Message: 1
Date: Thu, 12 May 2016 14:22:12 -0300
From: Gervais de Montbrun <gervais(a)demontbrun.com To: Wee
Sritippho <wee.s(a)forest.go.th Cc: users <users(a)ovirt.org Subject: Re: [ovirt-users] Adding another host to my cluster
Message-ID: <28B7FC74-5C52-4F60-B9F3-39A36621A7CA(a)demontbrun.com Content-Type: text/plain; charset="utf-8"
Hi Wee
(and others)
Thanks for the reply. I tried what you suggested, but I am in the exact
same state. :-(
I don't want to completely remove my hosted engine setup as it is working
on the two other hosts in my cluster. I did not run the rm -rf stes listed
here (
https://www.ovirt.org/documentation/how-to/hosted-engine/#recoving-from-f...
<
https://www.ovirt.org/documentation/how-to/hosted-engine/#recoving-from-f...>)
that would wipe my hosted_engine nfs mount. If you know that this is 100%
necessary, please let me know.
I did:
hosted-engine --clean-metadata --force-cleanup --host-id=3
run the bash script to remove all of the ovirt packages and config files
reinstalled ovirt-hosted-engine-setup
ran "hosted-engine --deploy"
I'm back exactly where I started. Is there a way to run just the network
configuration part of the deploy?
Since the last attempt, I did upgrade my hosted engine and my cluster is
now running oVirt 3.6.5.
Cheers,
Gervais
On May 12, 2016, at 11:50 AM, Wee Sritippho <wee.s(a)forest.go.th> wrote:
Hi,
I used to have a similar problem where one of my host can't be deployed due
to the absence of ovirtmgmt bridge. Simone said it's a bug (
https://bugzilla.redhat.com/1323465 <https://bugzilla.redhat.com/1323465> )
which would be fixed in 3.6.6.
This is what I've done to solve it:
1. In the web UI, set the failed host to maintenance.
2. Remove it.
3. In that host, run a script from
https://www.ovirt.org/documentation/how-to/hosted-engine/#recoving-from-f...
<
https://www.ovirt.org/documentation/how-to/hosted-engine/#recoving-from-f...
4. Install ovirt-hosted-engine-setup again.
5. Redeploy again.
Hope that helps
On 11 ??????? 2016 22 ?????? 48 ???? 58 ?????? GMT+07:00, Gervais de
Montbrun <gervais(a)demontbrun.com> wrote:
Hi Folks,
I hate to reply to my own message, but I'm really hoping someone can help
me with my issue
http://lists.ovirt.org/pipermail/users/2016-May/039690.html <
http://lists.ovirt.org/pipermail/users/2016-May/039690.html
Does anyone have a suggestion for me? If there is any more information that
I can provide that would help you to help me, please advise.
Cheers,
Gervais
On May 9, 2016, at 1:42 PM, Gervais de Montbrun <gervais(a)demontbrun.com
<mailto:gervais@demontbrun.com>> wrote:
Hi All,
I'm trying to add a third host into my oVirt cluster. I have hosted engine
setup on the first two. It's failing to finish the hosted-engine --deploy
on this third host. I wiped the server and did a CentOS 7 minimum install
and ran it again to have a clean machine.
My setup:
CentOS 7 clean install
yum install -y http://resources.ovirt.org/pub/yum-repo/ovirt-release36.rpm <
http://resources.ovirt.org/pub/yum-repo/ovirt-release36.rpm yum
install -y ovirt-hosted-engine-setup
yum upgrade -y && reboot
systemctl disable NetworkManager ; systemctl stop NetworkManager ;
systemctl disable firewalld ; systemctl stop firewalld
hosted-engine --deploy
hosted-engine --deploy always throws an error:
[ ERROR ] The VDSM host was found in a failed state. Please check engine
and bootstrap installation logs.
[ ERROR ] Unable to add Cultivar2 to the manager
and then echo's
[ INFO ] Waiting for VDSM hardware info
...
[ ERROR ] Failed to execute stage 'Closing up': VDSM did not start within
120 seconds
[ INFO ] Stage: Clean up
[ INFO ] Generating answer file
'/var/lib/ovirt-hosted-engine-setup/answers/answers-20160509131103.conf'
[ INFO ] Stage: Pre-termination
[ INFO ] Stage: Termination
[ ERROR ] Hosted Engine deployment failed: this system is not reliable,
please check the issue, fix and redeploy
Log file is located at
/var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20160509130658-qb8ev0.log
Full output of hosted-engine --deploy included in the attached zip file.
I've also included vdsm.log (There is more than one tries worth of tries in
there).
You'll also find the ovirt-hosted-engine-setup-20160509130658-qb8ev0.log
listed above.
This is my "test" setup. Cultivar0 is my first host and my nfs server for
storage. I have two hosts in the setup already and everything is working
fine. The host does show up in the oVirt admin, but shows "Installed Failed"
<PastedGraphic-1.png
Trying to reinstall from within the interface just fails again.
The ovirt bridge interface is not configured and there are no config files
in /etc/sysconfi/network-scripts related to ovirt.
OS:
[root@cultivar2 ovirt-hosted-engine-setup]# cat /etc/redhat-release
CentOS Linux release 7.2.1511 (Core)
[root@cultivar2 ovirt-hosted-engine-setup]# uname -a
Linux cultivar2.grove.silverorange.com <
http://cultivar2.grove.silverorange.com/> 3.10.0-327.13.1.el7.x86_64 #1 SMP
Thu Mar 31 16:04:38 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux
Versions:
[root@cultivar2 ovirt-hosted-engine-setup]# rpm -qa | grep -i ovirt
libgovirt-0.3.3-1.el7_2.1.x86_64
ovirt-hosted-engine-setup-1.3.5.0-1.1.el7.noarch
ovirt-host-deploy-1.4.1-1.el7.centos.noarch
ovirt-vmconsole-1.0.0-1.el7.centos.noarch
ovirt-vmconsole-host-1.0.0-1.el7.centos.noarch
ovirt-release36-007-1.noarch
ovirt-engine-sdk-python-3.6.5.0-1.el7.centos.noarch
ovirt-setup-lib-1.0.1-1.el7.centos.noarch
ovirt-hosted-engine-ha-1.3.5.3-1.1.el7.noarch
[root@cultivar2 ovirt-hosted-engine-setup]#
[root@cultivar2 ovirt-hosted-engine-setup]#
[root@cultivar2 ovirt-hosted-engine-setup]#
[root@cultivar2 ovirt-hosted-engine-setup]# rpm -qa | grep -i virt
libvirt-daemon-driver-secret-1.2.17-13.el7_2.4.x86_64
virt-viewer-2.0-6.el7.x86_64
libgovirt-0.3.3-1.el7_2.1.x86_64
libvirt-daemon-kvm-1.2.17-13.el7_2.4.x86_64
ovirt-hosted-engine-setup-1.3.5.0-1.1.el7.noarch
fence-virt-0.3.2-2.el7.x86_64
virt-what-1.13-6.el7.x86_64
libvirt-python-1.2.17-2.el7.x86_64
libvirt-daemon-1.2.17-13.el7_2.4.x86_64
libvirt-daemon-config-nwfilter-1.2.17-13.el7_2.4.x86_64
libvirt-lock-sanlock-1.2.17-13.el7_2.4.x86_64
libvirt-daemon-driver-nodedev-1.2.17-13.el7_2.4.x86_64
libvirt-daemon-driver-network-1.2.17-13.el7_2.4.x86_64
libvirt-daemon-driver-storage-1.2.17-13.el7_2.4.x86_64
ovirt-host-deploy-1.4.1-1.el7.centos.noarch
virt-v2v-1.28.1-1.55.el7.centos.2.x86_64
ovirt-vmconsole-1.0.0-1.el7.centos.noarch
ovirt-vmconsole-host-1.0.0-1.el7.centos.noarch
libvirt-client-1.2.17-13.el7_2.4.x86_64
libvirt-daemon-driver-nwfilter-1.2.17-13.el7_2.4.x86_64
ovirt-release36-007-1.noarch
libvirt-daemon-driver-interface-1.2.17-13.el7_2.4.x86_64
libvirt-daemon-driver-qemu-1.2.17-13.el7_2.4.x86_64
ovirt-engine-sdk-python-3.6.5.0-1.el7.centos.noarch
ovirt-setup-lib-1.0.1-1.el7.centos.noarch
ovirt-hosted-engine-ha-1.3.5.3-1.1.el7.noarch
I also have a series of stuck tasks that I can't clear related to the host
that can't be added... This is a secondary issue and I don't want to get
off track, but they look like this:
<PastedGraphic-2.png
I'd appreciate any help that can be offered.
Cheers,
Gervais
Gervais de Montbrun
Systems Administrator / silverorange Inc.
Phone +1 902 367 4532 ext. 104 <tel:+1
902 367 4532 ext. 104 Mobile
+1 902 978 0009 <tel:+1 902 978
0009
<hosted-engine--deploy-logs.zip
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users <
http://lists.ovirt.org/mailman/listinfo/users
--
Wee
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
6:55 a.m.
New subject: Adding another host to my cluster
This is a multi-part message in MIME format.
--------------050607040809020004050901
Content-Type: text/plain; charset=utf-8; format=flowed
Content-Transfer-Encoding: 7bit
Hi Gervais,
Hmm, can you tar up the logfiles (/var/log/vdsm/* on the host you are
installing on) and put them somewhere to look at? Also, I found that
starting VDSM from the command line is useful as it sometimes spits out
error messages that don't show up in the logs. I think the command I
used was:
su -s /bin/bash vdsm
python /usr/share/vdsm/vdsm
My problem was that I customized the logging settings in /etc/vdsm/*conf
to try and tone down the debugging stuff and had a syntax error.
On 16-05-12 10:24 PM, Gervais de Montbrun wrote:
Hi Charles,
Thanks for the suggestion.
I cleaned up again using the bash script from the
recoving-from-failed-install link below, then reinstalled (yum install
ovirt-hosted-engine-setup).
I enabled NetworkManager and firewalld as you suggested. The install
stops very early on with an error:
[ ERROR ] Failed to execute stage 'Programs detection': hosted-engine
cannot be deployed while NetworkManager is running, please stop and
disable it before proceeding
I disabled and stopped NetworkManager and tried again. Same result. :(
Any more guesses?
Cheers,
Gervais
> On May 12, 2016, at 9:08 PM, Charles Tassell <ctassell(a)gmail.com
> <mailto:ctassell@gmail.com>> wrote:
>
> Hey Gervais,
>
> Try enabling NetworkManager and firewalld before doing the
> hosted-engine --deploy. I have run into problems with oVirt trying
> to perform tasks on hosts where firewalld is disabled, so maybe you
> are running into a similar problem. Also, I think the setup script
> will disable NetworkManager if it needs to. I know I didn't manually
> disable it on any of the boxes I installed on.
>
> On 16-05-12 04:49 PM, users-request(a)ovirt.org
> <mailto:users-request@ovirt.org> wrote:
>> Message: 1
>> Date: Thu, 12 May 2016 14:22:12 -0300
>> From: Gervais de Montbrun <gervais(a)demontbrun.com
>> <mailto:gervais@demontbrun.com>>
>> To: Wee Sritippho <wee.s(a)forest.go.th <mailto:wee.s@forest.go.th>>
>> Cc: users <users(a)ovirt.org <mailto:users@ovirt.org>>
>> Subject: Re: [ovirt-users] Adding another host to my cluster
>> Message-ID: <28B7FC74-5C52-4F60-B9F3-39A36621A7CA(a)demontbrun.com
>> <mailto:28B7FC74-5C52-4F60-B9F3-39A36621A7CA@demontbrun.com>>
>> Content-Type: text/plain; charset="utf-8"
>>
>> Hi Wee
>> (and others)
>>
>> Thanks for the reply. I tried what you suggested, but I am in the
>> exact same state. :-(
>>
>> I don't want to completely remove my hosted engine setup as it is
>> working on the two other hosts in my cluster. I did not run the rm
>> -rf stes listed here
>>
(https://www.ovirt.org/documentation/how-to/hosted-engine/#recoving-from-f...
>>
<https://www.ovirt.org/documentation/how-to/hosted-engine/#recoving-from-f...>)
>> that would wipe my hosted_engine nfs mount. If you know that this is
>> 100% necessary, please let me know.
>>
>> I did:
>> hosted-engine --clean-metadata --force-cleanup --host-id=3
>> run the bash script to remove all of the ovirt packages and config files
>> reinstalled ovirt-hosted-engine-setup
>> ran "hosted-engine --deploy"
>>
>> I'm back exactly where I started. Is there a way to run just the
>> network configuration part of the deploy?
>>
>> Since the last attempt, I did upgrade my hosted engine and my
>> cluster is now running oVirt 3.6.5.
>>
>> Cheers,
>> Gervais
>>
>>
>>
>>> On May 12, 2016, at 11:50 AM, Wee Sritippho <wee.s(a)forest.go.th
>>> <mailto:wee.s@forest.go.th>> wrote:
>>>
>>> Hi,
>>>
>>> I used to have a similar problem where one of my host can't be
>>> deployed due to the absence of ovirtmgmt bridge. Simone said it's a
>>> bug ( https://bugzilla.redhat.com/1323465
>>> <https://bugzilla.redhat.com/1323465> ) which would be fixed in 3.6.6.
>>>
>>> This is what I've done to solve it:
>>>
>>> 1. In the web UI, set the failed host to maintenance.
>>> 2. Remove it.
>>> 3. In that host, run a script from
>>>
https://www.ovirt.org/documentation/how-to/hosted-engine/#recoving-from-f...
>>>
<https://www.ovirt.org/documentation/how-to/hosted-engine/#recoving-from-f...
>>> 4. Install ovirt-hosted-engine-setup again.
>>> 5. Redeploy again.
>>>
>>> Hope that helps
>>>
>>> On 11 ??????? 2016 22 ?????? 48 ???? 58 ?????? GMT+07:00, Gervais
>>> de Montbrun <gervais(a)demontbrun.com
>>> <mailto:gervais@demontbrun.com>> wrote:
>>> Hi Folks,
>>>
>>> I hate to reply to my own message, but I'm really hoping someone
>>> can help me with my issue
>>> http://lists.ovirt.org/pipermail/users/2016-May/039690.html
>>> <http://lists.ovirt.org/pipermail/users/2016-May/039690.html>
>>>
>>> Does anyone have a suggestion for me? If there is any more
>>> information that I can provide that would help you to help me,
>>> please advise.
>>>
>>> Cheers,
>>> Gervais
>>>
>>>
>>>
>>>> On May 9, 2016, at 1:42 PM, Gervais de Montbrun
>>>> <gervais(a)demontbrun.com <mailto:gervais@demontbrun.com>
>>>> <mailto:gervais@demontbrun.com
<mailto:gervais@demontbrun.com>>>
>>>> wrote:
>>>>
>>>> Hi All,
>>>>
>>>> I'm trying to add a third host into my oVirt cluster. I have
>>>> hosted engine setup on the first two. It's failing to finish the
>>>> hosted-engine --deploy on this third host. I wiped the server and
>>>> did a CentOS 7 minimum install and ran it again to have a clean
>>>> machine.
>>>>
>>>> My setup:
>>>> CentOS 7 clean install
>>>> yum install -y
>>>> http://resources.ovirt.org/pub/yum-repo/ovirt-release36.rpm
>>>> <http://resources.ovirt.org/pub/yum-repo/ovirt-release36.rpm>
>>>> yum install -y ovirt-hosted-engine-setup
>>>> yum upgrade -y && reboot
>>>> systemctl disable NetworkManager ; systemctl stop NetworkManager ;
>>>> systemctl disable firewalld ; systemctl stop firewalld
>>>> hosted-engine --deploy
>>>>
>>>> hosted-engine --deploy always throws an error:
>>>> [ ERROR ] The VDSM host was found in a failed state. Please check
>>>> engine and bootstrap installation logs.
>>>> [ ERROR ] Unable to add Cultivar2 to the manager
>>>> and then echo's
>>>> [ INFO ] Waiting for VDSM hardware info
>>>> ...
>>>> [ ERROR ] Failed to execute stage 'Closing up': VDSM did not
start
>>>> within 120 seconds
>>>> [ INFO ] Stage: Clean up
>>>> [ INFO ] Generating answer file
>>>>
'/var/lib/ovirt-hosted-engine-setup/answers/answers-20160509131103.conf'
>>>> [ INFO ] Stage: Pre-termination
>>>> [ INFO ] Stage: Termination
>>>> [ ERROR ] Hosted Engine deployment failed: this system is not
>>>> reliable, please check the issue, fix and redeploy
>>>> Log file is located at
>>>>
/var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20160509130658-qb8ev0.log
>>>>
>>>> Full output of hosted-engine --deploy included in the attached zip
>>>> file.
>>>> I've also included vdsm.log (There is more than one tries worth of
>>>> tries in there).
>>>> You'll also find the
>>>> ovirt-hosted-engine-setup-20160509130658-qb8ev0.log listed above.
>>>>
>>>> This is my "test" setup. Cultivar0 is my first host and my nfs
>>>> server for storage. I have two hosts in the setup already and
>>>> everything is working fine. The host does show up in the oVirt
>>>> admin, but shows "Installed Failed"
>>>> <PastedGraphic-1.png>
>>>>
>>>> Trying to reinstall from within the interface just fails again.
>>>>
>>>> The ovirt bridge interface is not configured and there are no
>>>> config files in /etc/sysconfi/network-scripts related to ovirt.
>>>>
>>>> OS:
>>>> [root@cultivar2 ovirt-hosted-engine-setup]# cat /etc/redhat-release
>>>> CentOS Linux release 7.2.1511 (Core)
>>>>
>>>> [root@cultivar2 ovirt-hosted-engine-setup]# uname -a
>>>> Linux cultivar2.grove.silverorange.com
>>>> <http://cultivar2.grove.silverorange.com>
>>>> <http://cultivar2.grove.silverorange.com/>
>>>> 3.10.0-327.13.1.el7.x86_64 #1 SMP Thu Mar 31 16:04:38 UTC 2016
>>>> x86_64 x86_64 x86_64 GNU/Linux
>>>>
>>>> Versions:
>>>> [root@cultivar2 ovirt-hosted-engine-setup]# rpm -qa | grep -i ovirt
>>>> libgovirt-0.3.3-1.el7_2.1.x86_64
>>>> ovirt-hosted-engine-setup-1.3.5.0-1.1.el7.noarch
>>>> ovirt-host-deploy-1.4.1-1.el7.centos.noarch
>>>> ovirt-vmconsole-1.0.0-1.el7.centos.noarch
>>>> ovirt-vmconsole-host-1.0.0-1.el7.centos.noarch
>>>> ovirt-release36-007-1.noarch
>>>> ovirt-engine-sdk-python-3.6.5.0-1.el7.centos.noarch
>>>> ovirt-setup-lib-1.0.1-1.el7.centos.noarch
>>>> ovirt-hosted-engine-ha-1.3.5.3-1.1.el7.noarch
>>>> [root@cultivar2 ovirt-hosted-engine-setup]#
>>>> [root@cultivar2 ovirt-hosted-engine-setup]#
>>>> [root@cultivar2 ovirt-hosted-engine-setup]#
>>>> [root@cultivar2 ovirt-hosted-engine-setup]# rpm -qa | grep -i virt
>>>> libvirt-daemon-driver-secret-1.2.17-13.el7_2.4.x86_64
>>>> virt-viewer-2.0-6.el7.x86_64
>>>> libgovirt-0.3.3-1.el7_2.1.x86_64
>>>> libvirt-daemon-kvm-1.2.17-13.el7_2.4.x86_64
>>>> ovirt-hosted-engine-setup-1.3.5.0-1.1.el7.noarch
>>>> fence-virt-0.3.2-2.el7.x86_64
>>>> virt-what-1.13-6.el7.x86_64
>>>> libvirt-python-1.2.17-2.el7.x86_64
>>>> libvirt-daemon-1.2.17-13.el7_2.4.x86_64
>>>> libvirt-daemon-config-nwfilter-1.2.17-13.el7_2.4.x86_64
>>>> libvirt-lock-sanlock-1.2.17-13.el7_2.4.x86_64
>>>> libvirt-daemon-driver-nodedev-1.2.17-13.el7_2.4.x86_64
>>>> libvirt-daemon-driver-network-1.2.17-13.el7_2.4.x86_64
>>>> libvirt-daemon-driver-storage-1.2.17-13.el7_2.4.x86_64
>>>> ovirt-host-deploy-1.4.1-1.el7.centos.noarch
>>>> virt-v2v-1.28.1-1.55.el7.centos.2.x86_64
>>>> ovirt-vmconsole-1.0.0-1.el7.centos.noarch
>>>> ovirt-vmconsole-host-1.0.0-1.el7.centos.noarch
>>>> libvirt-client-1.2.17-13.el7_2.4.x86_64
>>>> libvirt-daemon-driver-nwfilter-1.2.17-13.el7_2.4.x86_64
>>>> ovirt-release36-007-1.noarch
>>>> libvirt-daemon-driver-interface-1.2.17-13.el7_2.4.x86_64
>>>> libvirt-daemon-driver-qemu-1.2.17-13.el7_2.4.x86_64
>>>> ovirt-engine-sdk-python-3.6.5.0-1.el7.centos.noarch
>>>> ovirt-setup-lib-1.0.1-1.el7.centos.noarch
>>>> ovirt-hosted-engine-ha-1.3.5.3-1.1.el7.noarch
>>>>
>>>> I also have a series of stuck tasks that I can't clear related to
>>>> the host that can't be added... This is a secondary issue and I
>>>> don't want to get off track, but they look like this:
>>>> <PastedGraphic-2.png>
>>>>
>>>> I'd appreciate any help that can be offered.
>>>>
>>>> Cheers,
>>>> Gervais
>>>>
>>>>
>>>> Gervais de Montbrun
>>>> Systems Administrator / silverorange Inc.
>>>>
>>>> Phone +1 902 367 4532 ext. 104
>>>> <tel:%2B1%20902%20367%204532%20ext.%20104> <tel:+1 902 367 4532
>>>> ext. 104 <tel:%2B1%20902%20367%204532%20ext.%20104>>
>>>> Mobile +1 902 978 0009 <tel:%2B1%20902%20978%200009> <tel:+1 902
>>>> 978 0009 <tel:%2B1%20902%20978%200009>>
>>>>
>>>> <hosted-engine--deploy-logs.zip>
>>>
>>>
>>> Users mailing list
>>> Users(a)ovirt.org <mailto:Users@ovirt.org>
>>> http://lists.ovirt.org/mailman/listinfo/users
>>> <http://lists.ovirt.org/mailman/listinfo/users>
>>>
>>> --
>>> Wee
>>
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org <mailto:Users@ovirt.org>
> http://lists.ovirt.org/mailman/listinfo/users
--------------050607040809020004050901
Content-Type: text/html; charset=utf-8
Content-Transfer-Encoding: 8bit
<html>
<head>
<meta content="text/html; charset=utf-8"
http-equiv="Content-Type">
</head>
<body text="#000000" bgcolor="#FFFFFF">
<div class="moz-cite-prefix">Hi Gervais,<br>
<br>
Hmm, can you tar up the logfiles (/var/log/vdsm/* on the host
you are installing on) and put them somewhere to look at? Also, I
found that starting VDSM from the command line is useful as it
sometimes spits out error messages that don't show up in the
logs. I think the command I used was:<br>
su -s /bin/bash vdsm<br>
python /usr/share/vdsm/vdsm<br>
<br>
My problem was that I customized the logging settings in
/etc/vdsm/*conf to try and tone down the debugging stuff and had a
syntax error.<br>
<br>
On 16-05-12 10:24 PM, Gervais de Montbrun wrote:<br>
</div>
<blockquote
cite="mid:CAESCRhP_6k3m45726-QFHsxv-be+LNWQNeQ+_XPc2sLnLrZ8PA@mail.gmail.com"
type="cite">
<div dir="ltr">
<div dir="auto" style="word-wrap:break-word">Hi
Charles,<br>
<br>
Thanks for the suggestion.<br>
<br>
I cleaned up again using the bash script from the
recoving-from-failed-install link below, then reinstalled (yum
install ovirt-hosted-engine-setup).<br>
<br>
I enabled NetworkManager and firewalld as you suggested. The
install stops very early on with an error:<br>
<span style="white-space:pre-wrap"> </span>[ ERROR ]
Failed to
execute stage 'Programs detection': hosted-engine cannot be
deployed while NetworkManager is running, please stop and
disable it before proceeding <br>
<br>
I disabled and stopped NetworkManager and tried again. Same
result. :(<br>
<br>
Any more guesses?<br>
<br>
Cheers,<br>
Gervais<br>
<br>
<br>
<br>
<blockquote type="cite">On May 12, 2016, at 9:08 PM, Charles
Tassell <<a moz-do-not-send="true"
href="mailto:ctassell@gmail.com"
target="_blank">ctassell(a)gmail.com</a>&gt;
wrote:<br>
<br>
Hey Gervais,<br>
<br>
Try enabling NetworkManager and firewalld before doing the
hosted-engine --deploy. I have run into problems with oVirt
trying to perform tasks on hosts where firewalld is
disabled, so maybe you are running into a similar problem.
Also, I think the setup script will disable NetworkManager
if it needs to. I know I didn't manually disable it on any
of the boxes I installed on.<br>
<br>
On 16-05-12 04:49 PM, <a moz-do-not-send="true"
href="mailto:users-request@ovirt.org"
target="_blank">users-request(a)ovirt.org</a>
wrote:<br>
<blockquote type="cite">Message: 1<br>
Date: Thu, 12 May 2016 14:22:12 -0300<br>
From: Gervais de Montbrun <<a moz-do-not-send="true"
href="mailto:gervais@demontbrun.com"
target="_blank">gervais(a)demontbrun.com</a>&gt;<br>
To: Wee Sritippho <<a moz-do-not-send="true"
href="mailto:wee.s@forest.go.th"
target="_blank">wee.s(a)forest.go.th</a>&gt;<br>
Cc: users <<a moz-do-not-send="true"
href="mailto:users@ovirt.org"
target="_blank">users(a)ovirt.org</a>&gt;<br>
Subject: Re: [ovirt-users] Adding another host to my
cluster<br>
Message-ID: <<a moz-do-not-send="true"
href="mailto:28B7FC74-5C52-4F60-B9F3-39A36621A7CA@demontbrun.com"
target="_blank">28B7FC74-5C52-4F60-B9F3-39A36621A7CA(a)demontbrun.com</a>&gt;<br>
Content-Type: text/plain; charset="utf-8"<br>
<br>
Hi Wee<br>
(and others)<br>
<br>
Thanks for the reply. I tried what you suggested, but I am
in the exact same state. :-(<br>
<br>
I don't want to completely remove my hosted engine setup
as it is working on the two other hosts in my cluster. I
did not run the rm -rf stes listed here (<a
moz-do-not-send="true"
href="https://www.ovirt.org/documentation/how-to/hosted-engine/#reco...
target="_blank"><a class="moz-txt-link-freetext"
href="https://www.ovirt.org/documentation/how-to/hosted-engine/#reco...
<<a moz-do-not-send="true"
href="https://www.ovirt.org/documentation/how-to/hosted-engine/#reco...
target="_blank">https://www.ovirt.org/documentation/how-to/h...)
that would wipe my hosted_engine nfs mount. If you know
that this is 100% necessary, please let me know.<br>
<br>
I did:<br>
hosted-engine --clean-metadata --force-cleanup --host-id=3<br>
run the bash script to remove all of the ovirt packages
and config files<br>
reinstalled ovirt-hosted-engine-setup<br>
ran "hosted-engine --deploy"<br>
<br>
I'm back exactly where I started. Is there a way to run
just the network configuration part of the deploy?<br>
<br>
Since the last attempt, I did upgrade my hosted engine and
my cluster is now running oVirt 3.6.5.<br>
<br>
Cheers,<br>
Gervais<br>
<br>
<br>
<br>
<blockquote type="cite">On May 12, 2016, at 11:50 AM, Wee
Sritippho <<a moz-do-not-send="true"
href="mailto:wee.s@forest.go.th"
target="_blank">wee.s(a)forest.go.th</a>&gt;
wrote:<br>
<br>
Hi,<br>
<br>
I used to have a similar problem where one of my host
can't be deployed due to the absence of ovirtmgmt
bridge. Simone said it's a bug ( <a
moz-do-not-send="true"
href="https://bugzilla.redhat.com/1323465"
target="_blank"><a
class="moz-txt-link-freetext"
href="https://bugzilla.redhat.com/1323465">https://bugzilla....
<<a moz-do-not-send="true"
href="https://bugzilla.redhat.com/1323465"
target="_blank">https://bugzilla.redhat.com/1323465</a>...
) which would be fixed in 3.6.6.<br>
<br>
This is what I've done to solve it:<br>
<br>
1. In the web UI, set the failed host to maintenance.<br>
2. Remove it.<br>
3. In that host, run a script from <a
moz-do-not-send="true"
href="https://www.ovirt.org/documentation/how-to/hosted-engine/#reco...
target="_blank"><a
class="moz-txt-link-freetext"
href="https://www.ovirt.org/documentation/how-to/hosted-engine/#reco...
<<a moz-do-not-send="true"
href="https://www.ovirt.org/documentation/how-to/hosted-engine/#reco...
target="_blank">https://www.ovirt.org/documentation/how-to/h...
4. Install ovirt-hosted-engine-setup again.<br>
5. Redeploy again.<br>
<br>
Hope that helps<br>
<br>
On 11 ??????? 2016 22 ?????? 48 ???? 58 ??????
GMT+07:00, Gervais de Montbrun <<a
moz-do-not-send="true"
href="mailto:gervais@demontbrun.com"
target="_blank"><a class="moz-txt-link-abbreviated"
href="mailto:gervais@demontbrun.com">gervais@demontbrun.com</a></a>>
wrote:<br>
Hi Folks,<br>
<br>
I hate to reply to my own message, but I'm really hoping
someone can help me with my issue<br>
<a moz-do-not-send="true"
href="http://lists.ovirt.org/pipermail/users/2016-May/039690.html"
target="_blank">http://lists.ovirt.org/pipermail/users/2016-...
<<a moz-do-not-send="true"
href="http://lists.ovirt.org/pipermail/users/2016-May/039690.html"
target="_blank">http://lists.ovirt.org/pipermail/users/2016-...
<br>
Does anyone have a suggestion for me? If there is any
more information that I can provide that would help you
to help me, please advise.<br>
<br>
Cheers,<br>
Gervais<br>
<br>
<br>
<br>
<blockquote type="cite">On May 9, 2016, at 1:42 PM,
Gervais de Montbrun <<a moz-do-not-send="true"
href="mailto:gervais@demontbrun.com"
target="_blank">gervais(a)demontbrun.com</a>
<mailto:<a moz-do-not-send="true"
href="mailto:gervais@demontbrun.com"
target="_blank">gervais(a)demontbrun.com</a>&gt;&gt;
wrote:<br>
<br>
Hi All,<br>
<br>
I'm trying to add a third host into my oVirt cluster.
I have hosted engine setup on the first two. It's
failing to finish the hosted-engine --deploy on this
third host. I wiped the server and did a CentOS 7
minimum install and ran it again to have a clean
machine.<br>
<br>
My setup:<br>
CentOS 7 clean install<br>
yum install -y <a moz-do-not-send="true"
href="http://resources.ovirt.org/pub/yum-repo/ovirt-release36.rpm"
target="_blank">http://resources.ovirt.org/pub/yum-repo/ovir...
<<a moz-do-not-send="true"
href="http://resources.ovirt.org/pub/yum-repo/ovirt-release36.rpm"
target="_blank">http://resources.ovirt.org/pub/yum-repo/ovir...
yum install -y ovirt-hosted-engine-setup<br>
yum upgrade -y && reboot<br>
systemctl disable NetworkManager ; systemctl stop
NetworkManager ; systemctl disable firewalld ;
systemctl stop firewalld<br>
hosted-engine --deploy<br>
<br>
hosted-engine --deploy always throws an error:<br>
[ ERROR ] The VDSM host was found in a failed state.
Please check engine and bootstrap installation logs.<br>
[ ERROR ] Unable to add Cultivar2 to the manager<br>
and then echo's<br>
[ INFO ] Waiting for VDSM hardware info<br>
...<br>
[ ERROR ] Failed to execute stage 'Closing up': VDSM
did not start within 120 seconds<br>
[ INFO ] Stage: Clean up<br>
[ INFO ] Generating answer file
'/var/lib/ovirt-hosted-engine-setup/answers/answers-20160509131103.conf'<br>
[ INFO ] Stage: Pre-termination<br>
[ INFO ] Stage: Termination<br>
[ ERROR ] Hosted Engine deployment failed: this system
is not reliable, please check the issue, fix and
redeploy<br>
Log file is located at
/var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20160509130658-qb8ev0.log<br>
<br>
Full output of hosted-engine --deploy included in the
attached zip file.<br>
I've also included vdsm.log (There is more than one
tries worth of tries in there).<br>
You'll also find the
ovirt-hosted-engine-setup-20160509130658-qb8ev0.log
listed above.<br>
<br>
This is my "test" setup. Cultivar0 is my first host
and my nfs server for storage. I have two hosts in the
setup already and everything is working fine. The host
does show up in the oVirt admin, but shows "Installed
Failed"<br>
<PastedGraphic-1.png><br>
<br>
Trying to reinstall from within the interface just
fails again.<br>
<br>
The ovirt bridge interface is not configured and there
are no config files in /etc/sysconfi/network-scripts
related to ovirt.<br>
<br>
OS:<br>
[root@cultivar2 ovirt-hosted-engine-setup]# cat
/etc/redhat-release<br>
CentOS Linux release 7.2.1511 (Core)<br>
<br>
[root@cultivar2 ovirt-hosted-engine-setup]# uname -a<br>
Linux <a moz-do-not-send="true"
href="http://cultivar2.grove.silverorange.com"
target="_blank">cultivar2.grove.silverorange.com</a>
<<a moz-do-not-send="true"
href="http://cultivar2.grove.silverorange.com/"
target="_blank">http://cultivar2.grove.silverorange.com/<...
3.10.0-327.13.1.el7.x86_64 #1 SMP Thu Mar 31 16:04:38
UTC 2016 x86_64 x86_64 x86_64 GNU/Linux<br>
<br>
Versions:<br>
[root@cultivar2 ovirt-hosted-engine-setup]# rpm -qa |
grep -i ovirt<br>
libgovirt-0.3.3-1.el7_2.1.x86_64<br>
ovirt-hosted-engine-setup-1.3.5.0-1.1.el7.noarch<br>
ovirt-host-deploy-1.4.1-1.el7.centos.noarch<br>
ovirt-vmconsole-1.0.0-1.el7.centos.noarch<br>
ovirt-vmconsole-host-1.0.0-1.el7.centos.noarch<br>
ovirt-release36-007-1.noarch<br>
ovirt-engine-sdk-python-3.6.5.0-1.el7.centos.noarch<br>
ovirt-setup-lib-1.0.1-1.el7.centos.noarch<br>
ovirt-hosted-engine-ha-1.3.5.3-1.1.el7.noarch<br>
[root@cultivar2 ovirt-hosted-engine-setup]#<br>
[root@cultivar2 ovirt-hosted-engine-setup]#<br>
[root@cultivar2 ovirt-hosted-engine-setup]#<br>
[root@cultivar2 ovirt-hosted-engine-setup]# rpm -qa |
grep -i virt<br>
libvirt-daemon-driver-secret-1.2.17-13.el7_2.4.x86_64<br>
virt-viewer-2.0-6.el7.x86_64<br>
libgovirt-0.3.3-1.el7_2.1.x86_64<br>
libvirt-daemon-kvm-1.2.17-13.el7_2.4.x86_64<br>
ovirt-hosted-engine-setup-1.3.5.0-1.1.el7.noarch<br>
fence-virt-0.3.2-2.el7.x86_64<br>
virt-what-1.13-6.el7.x86_64<br>
libvirt-python-1.2.17-2.el7.x86_64<br>
libvirt-daemon-1.2.17-13.el7_2.4.x86_64<br>
libvirt-daemon-config-nwfilter-1.2.17-13.el7_2.4.x86_64<br>
libvirt-lock-sanlock-1.2.17-13.el7_2.4.x86_64<br>
libvirt-daemon-driver-nodedev-1.2.17-13.el7_2.4.x86_64<br>
libvirt-daemon-driver-network-1.2.17-13.el7_2.4.x86_64<br>
libvirt-daemon-driver-storage-1.2.17-13.el7_2.4.x86_64<br>
ovirt-host-deploy-1.4.1-1.el7.centos.noarch<br>
virt-v2v-1.28.1-1.55.el7.centos.2.x86_64<br>
ovirt-vmconsole-1.0.0-1.el7.centos.noarch<br>
ovirt-vmconsole-host-1.0.0-1.el7.centos.noarch<br>
libvirt-client-1.2.17-13.el7_2.4.x86_64<br>
libvirt-daemon-driver-nwfilter-1.2.17-13.el7_2.4.x86_64<br>
ovirt-release36-007-1.noarch<br>
libvirt-daemon-driver-interface-1.2.17-13.el7_2.4.x86_64<br>
libvirt-daemon-driver-qemu-1.2.17-13.el7_2.4.x86_64<br>
ovirt-engine-sdk-python-3.6.5.0-1.el7.centos.noarch<br>
ovirt-setup-lib-1.0.1-1.el7.centos.noarch<br>
ovirt-hosted-engine-ha-1.3.5.3-1.1.el7.noarch<br>
<br>
I also have a series of stuck tasks that I can't clear
related to the host that can't be added... This is a
secondary issue and I don't want to get off track, but
they look like this:<br>
<PastedGraphic-2.png><br>
<br>
I'd appreciate any help that can be offered.<br>
<br>
Cheers,<br>
Gervais<br>
<br>
<br>
Gervais de Montbrun<br>
Systems Administrator / silverorange Inc.<br>
<br>
Phone <span
style="white-space:pre-wrap"> </span><a
moz-do-not-send="true"
href="tel:%2B1%20902%20367%204532%20ext.%20104"
value="+19023674532" target="_blank">+1 902 367
4532
ext. 104</a> <tel:<a moz-do-not-send="true"
href="tel:%2B1%20902%20367%204532%20ext.%20104"
value="+19023674532" target="_blank">+1 902 367
4532
ext. 104</a>><br>
Mobile <span
style="white-space:pre-wrap"> </span><a
moz-do-not-send="true"
href="tel:%2B1%20902%20978%200009"
value="+19029780009" target="_blank">+1 902 978
0009</a>
<tel:<a moz-do-not-send="true"
href="tel:%2B1%20902%20978%200009"
value="+19029780009" target="_blank">+1 902 978
0009</a>><br>
<br>
<hosted-engine--deploy-logs.zip><br>
</blockquote>
<br>
<br>
Users mailing list<br>
<a moz-do-not-send="true"
href="mailto:Users@ovirt.org"
target="_blank">Users(a)ovirt.org</a><br>
<a moz-do-not-send="true"
href="http://lists.ovirt.org/mailman/listinfo/users"
target="_blank">http://lists.ovirt.org/mailman/listinfo/user...
<<a moz-do-not-send="true"
href="http://lists.ovirt.org/mailman/listinfo/users"
target="_blank">http://lists.ovirt.org/mailman/listinfo/user...
<br>
-- <br>
Wee<br>
</blockquote>
<br>
</blockquote>
<br>
_______________________________________________<br>
Users mailing list<br>
<a moz-do-not-send="true"
href="mailto:Users@ovirt.org"
target="_blank">Users(a)ovirt.org</a><br>
<a moz-do-not-send="true"
href="http://lists.ovirt.org/mailman/listinfo/users"
target="_blank">http://lists.ovirt.org/mailman/listinfo/user...
</blockquote>
<br>
</div>
</div>
</blockquote>
<br>
</body>
</html>
--------------050607040809020004050901--
3:37 p.m.
New subject: Adding another host to my cluster
Hi Charles,
I think the problem I am having is due to the setup failing and not
something in vdsm configs as I have never gotten this server to start up
properly and the BRIDGE ethernet interface + ovirt routes are not setup.
I put the logs here:
https://www.dropbox.com/sh/5ugyykqh1lgru9l/AACXxRYWr3tgd0WbBVFW5twHa?dl=0
hosted-engine--deploy-logs.zip # Logs from when I tried to deploy and it
failed
vdsm.tar.gz # /var/log/vdsm
Output from running vdsm from the command line:
[root@cultivar2 log]# su -s /bin/bash vdsm
[vdsm@cultivar2 log]$ python /usr/share/vdsm/vdsm
(PID: 6521) I am the actual vdsm 4.17.26-1.el7
cultivar2.grove.silverorange.com (3.10.0-327.el7.x86_64)
VDSM will run with cpu affinity: frozenset([1])
/usr/bin/taskset --all-tasks --pid --cpu-list 1 6521 (cwd None)
SUCCESS: <err> = ''; <rc> = 0
Starting scheduler vdsm.Scheduler
started
Run and protect:
registerDomainStateChangeCallback(callbackFunc=<functools.partial object at
0x381b158>)
Run and protect: registerDomainStateChangeCallback, Return response: None
Trying to connect to Super Vdsm
Preparing MOM interface
Using named unix socket /var/run/vdsm/mom-vdsm.sock
Unregistering all secrests
trying to connect libvirt
recovery: started
Setting channels' timeout to 30 seconds.
Starting VM channels listener thread.
Listening at 0.0.0.0:54321
Adding detector <rpc.bindingxmlrpc.XmlDetector instance at 0x3b4ecb0>
recovery: completed in 0s
Adding detector <yajsonrpc.stompreactor.StompDetector instance at 0x382e5a8>
Starting executor
Starting worker jsonrpc.Executor/0
Worker started
Starting worker jsonrpc.Executor/1
Worker started
Starting worker jsonrpc.Executor/2
Worker started
Starting worker jsonrpc.Executor/3
Worker started
Starting worker jsonrpc.Executor/4
Worker started
Starting worker jsonrpc.Executor/5
Worker started
Starting worker jsonrpc.Executor/6
Worker started
Starting worker jsonrpc.Executor/7
Worker started
XMLRPC server running
Starting executor
Starting worker periodic/0
Worker started
Starting worker periodic/1
Worker started
Starting worker periodic/2
Worker started
Starting worker periodic/3
Worker started
trying to connect libvirt
Panic: Connect to supervdsm service failed: [Errno 2] No such file or
directory
Traceback (most recent call last):
File "/usr/share/vdsm/supervdsm.py", line 78, in _connect
utils.retry(self._manager.connect, Exception, timeout=60, tries=3)
File "/usr/lib/python2.7/site-packages/vdsm/utils.py", line 959, in retry
return func()
File "/usr/lib64/python2.7/multiprocessing/managers.py", line 500, in
connect
conn = Client(self._address, authkey=self._authkey)
File "/usr/lib64/python2.7/multiprocessing/connection.py", line 173, in
Client
c = SocketClient(address)
File "/usr/lib64/python2.7/multiprocessing/connection.py", line 308, in
SocketClient
s.connect(address)
File "/usr/lib64/python2.7/socket.py", line 224, in meth
return getattr(self._sock,name)(*args)
error: [Errno 2] No such file or directory
Killed
Thanks for the help. It's really appreciated.
Cheers,
Gervais
On Fri, May 13, 2016 at 12:55 AM, Charles Tassell <ctassell(a)gmail.com>
wrote:
Hi Gervais,
Hmm, can you tar up the logfiles (/var/log/vdsm/* on the host you are
installing on) and put them somewhere to look at? Also, I found that
starting VDSM from the command line is useful as it sometimes spits out
error messages that don't show up in the logs. I think the command I used
was:
su -s /bin/bash vdsm
python /usr/share/vdsm/vdsm
My problem was that I customized the logging settings in /etc/vdsm/*conf
to try and tone down the debugging stuff and had a syntax error.
On 16-05-12 10:24 PM, Gervais de Montbrun wrote:
Hi Charles,
Thanks for the suggestion.
I cleaned up again using the bash script from the
recoving-from-failed-install link below, then reinstalled (yum install
ovirt-hosted-engine-setup).
I enabled NetworkManager and firewalld as you suggested. The install stops
very early on with an error:
[ ERROR ] Failed to execute stage 'Programs detection': hosted-engine
cannot be deployed while NetworkManager is running, please stop and disable
it before proceeding
I disabled and stopped NetworkManager and tried again. Same result. :(
Any more guesses?
Cheers,
Gervais
On May 12, 2016, at 9:08 PM, Charles Tassell <ctassell(a)gmail.com> wrote:
Hey Gervais,
Try enabling NetworkManager and firewalld before doing the hosted-engine
--deploy. I have run into problems with oVirt trying to perform tasks on
hosts where firewalld is disabled, so maybe you are running into a similar
problem. Also, I think the setup script will disable NetworkManager if it
needs to. I know I didn't manually disable it on any of the boxes I
installed on.
On 16-05-12 04:49 PM, users-request(a)ovirt.org wrote:
Message: 1
Date: Thu, 12 May 2016 14:22:12 -0300
From: Gervais de Montbrun <gervais(a)demontbrun.com>
To: Wee Sritippho <wee.s(a)forest.go.th>
Cc: users <users(a)ovirt.org>
Subject: Re: [ovirt-users] Adding another host to my cluster
Message-ID: <28B7FC74-5C52-4F60-B9F3-39A36621A7CA(a)demontbrun.com>
Content-Type: text/plain; charset="utf-8"
Hi Wee
(and others)
Thanks for the reply. I tried what you suggested, but I am in the exact
same state. :-(
I don't want to completely remove my hosted engine setup as it is working
on the two other hosts in my cluster. I did not run the rm -rf stes listed
here (
<https://www.ovirt.org/documentation/how-to/hosted-engine/#recoving-from-f...
https://www.ovirt.org/documentation/how-to/hosted-engine/#recoving-from-f...
<
https://www.ovirt.org/documentation/how-to/hosted-engine/#recoving-from-f...>)
that would wipe my hosted_engine nfs mount. If you know that this is 100%
necessary, please let me know.
I did:
hosted-engine --clean-metadata --force-cleanup --host-id=3
run the bash script to remove all of the ovirt packages and config files
reinstalled ovirt-hosted-engine-setup
ran "hosted-engine --deploy"
I'm back exactly where I started. Is there a way to run just the network
configuration part of the deploy?
Since the last attempt, I did upgrade my hosted engine and my cluster is
now running oVirt 3.6.5.
Cheers,
Gervais
On May 12, 2016, at 11:50 AM, Wee Sritippho <wee.s(a)forest.go.th> wrote:
Hi,
I used to have a similar problem where one of my host can't be deployed
due to the absence of ovirtmgmt bridge. Simone said it's a bug (
<https://bugzilla.redhat.com/1323465>https://bugzilla.redhat.com/1323465 <
https://bugzilla.redhat.com/1323465> ) which would be fixed in 3.6.6.
This is what I've done to solve it:
1. In the web UI, set the failed host to maintenance.
2. Remove it.
3. In that host, run a script from
<https://www.ovirt.org/documentation/how-to/hosted-engine/#recoving-from-f...
https://www.ovirt.org/documentation/how-to/hosted-engine/#recoving-from-f...
<
https://www.ovirt.org/documentation/how-to/hosted-engine/#recoving-from-f...
>
4. Install ovirt-hosted-engine-setup again.
5. Redeploy again.
Hope that helps
On 11 ??????? 2016 22 ?????? 48 ???? 58 ?????? GMT+07:00, Gervais de
Montbrun < <gervais@demontbrun.com>gervais(a)demontbrun.com> wrote:
Hi Folks,
I hate to reply to my own message, but I'm really hoping someone can help
me with my issue
http://lists.ovirt.org/pipermail/users/2016-May/039690.html <
http://lists.ovirt.org/pipermail/users/2016-May/039690.html>
Does anyone have a suggestion for me? If there is any more information
that I can provide that would help you to help me, please advise.
Cheers,
Gervais
On May 9, 2016, at 1:42 PM, Gervais de Montbrun <gervais(a)demontbrun.com
<mailto:gervais@demontbrun.com>> wrote:
Hi All,
I'm trying to add a third host into my oVirt cluster. I have hosted engine
setup on the first two. It's failing to finish the hosted-engine --deploy
on this third host. I wiped the server and did a CentOS 7 minimum install
and ran it again to have a clean machine.
My setup:
CentOS 7 clean install
yum install -y http://resources.ovirt.org/pub/yum-repo/ovirt-release36.rpm
<http://resources.ovirt.org/pub/yum-repo/ovirt-release36.rpm>
yum install -y ovirt-hosted-engine-setup
yum upgrade -y && reboot
systemctl disable NetworkManager ; systemctl stop NetworkManager ;
systemctl disable firewalld ; systemctl stop firewalld
hosted-engine --deploy
hosted-engine --deploy always throws an error:
[ ERROR ] The VDSM host was found in a failed state. Please check engine
and bootstrap installation logs.
[ ERROR ] Unable to add Cultivar2 to the manager
and then echo's
[ INFO ] Waiting for VDSM hardware info
...
[ ERROR ] Failed to execute stage 'Closing up': VDSM did not start within
120 seconds
[ INFO ] Stage: Clean up
[ INFO ] Generating answer file
'/var/lib/ovirt-hosted-engine-setup/answers/answers-20160509131103.conf'
[ INFO ] Stage: Pre-termination
[ INFO ] Stage: Termination
[ ERROR ] Hosted Engine deployment failed: this system is not reliable,
please check the issue, fix and redeploy
Log file is located at
/var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20160509130658-qb8ev0.log
Full output of hosted-engine --deploy included in the attached zip file.
I've also included vdsm.log (There is more than one tries worth of tries
in there).
You'll also find the ovirt-hosted-engine-setup-20160509130658-qb8ev0.log
listed above.
This is my "test" setup. Cultivar0 is my first host and my nfs server for
storage. I have two hosts in the setup already and everything is working
fine. The host does show up in the oVirt admin, but shows "Installed Failed"
<PastedGraphic-1.png>
Trying to reinstall from within the interface just fails again.
The ovirt bridge interface is not configured and there are no config files
in /etc/sysconfi/network-scripts related to ovirt.
OS:
[root@cultivar2 ovirt-hosted-engine-setup]# cat /etc/redhat-release
CentOS Linux release 7.2.1511 (Core)
[root@cultivar2 ovirt-hosted-engine-setup]# uname -a
Linux cultivar2.grove.silverorange.com <
http://cultivar2.grove.silverorange.com/> 3.10.0-327.13.1.el7.x86_64 #1
SMP Thu Mar 31 16:04:38 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux
Versions:
[root@cultivar2 ovirt-hosted-engine-setup]# rpm -qa | grep -i ovirt
libgovirt-0.3.3-1.el7_2.1.x86_64
ovirt-hosted-engine-setup-1.3.5.0-1.1.el7.noarch
ovirt-host-deploy-1.4.1-1.el7.centos.noarch
ovirt-vmconsole-1.0.0-1.el7.centos.noarch
ovirt-vmconsole-host-1.0.0-1.el7.centos.noarch
ovirt-release36-007-1.noarch
ovirt-engine-sdk-python-3.6.5.0-1.el7.centos.noarch
ovirt-setup-lib-1.0.1-1.el7.centos.noarch
ovirt-hosted-engine-ha-1.3.5.3-1.1.el7.noarch
[root@cultivar2 ovirt-hosted-engine-setup]#
[root@cultivar2 ovirt-hosted-engine-setup]#
[root@cultivar2 ovirt-hosted-engine-setup]#
[root@cultivar2 ovirt-hosted-engine-setup]# rpm -qa | grep -i virt
libvirt-daemon-driver-secret-1.2.17-13.el7_2.4.x86_64
virt-viewer-2.0-6.el7.x86_64
libgovirt-0.3.3-1.el7_2.1.x86_64
libvirt-daemon-kvm-1.2.17-13.el7_2.4.x86_64
ovirt-hosted-engine-setup-1.3.5.0-1.1.el7.noarch
fence-virt-0.3.2-2.el7.x86_64
virt-what-1.13-6.el7.x86_64
libvirt-python-1.2.17-2.el7.x86_64
libvirt-daemon-1.2.17-13.el7_2.4.x86_64
libvirt-daemon-config-nwfilter-1.2.17-13.el7_2.4.x86_64
libvirt-lock-sanlock-1.2.17-13.el7_2.4.x86_64
libvirt-daemon-driver-nodedev-1.2.17-13.el7_2.4.x86_64
libvirt-daemon-driver-network-1.2.17-13.el7_2.4.x86_64
libvirt-daemon-driver-storage-1.2.17-13.el7_2.4.x86_64
ovirt-host-deploy-1.4.1-1.el7.centos.noarch
virt-v2v-1.28.1-1.55.el7.centos.2.x86_64
ovirt-vmconsole-1.0.0-1.el7.centos.noarch
ovirt-vmconsole-host-1.0.0-1.el7.centos.noarch
libvirt-client-1.2.17-13.el7_2.4.x86_64
libvirt-daemon-driver-nwfilter-1.2.17-13.el7_2.4.x86_64
ovirt-release36-007-1.noarch
libvirt-daemon-driver-interface-1.2.17-13.el7_2.4.x86_64
libvirt-daemon-driver-qemu-1.2.17-13.el7_2.4.x86_64
ovirt-engine-sdk-python-3.6.5.0-1.el7.centos.noarch
ovirt-setup-lib-1.0.1-1.el7.centos.noarch
ovirt-hosted-engine-ha-1.3.5.3-1.1.el7.noarch
I also have a series of stuck tasks that I can't clear related to the host
that can't be added... This is a secondary issue and I don't want to get
off track, but they look like this:
<PastedGraphic-2.png>
I'd appreciate any help that can be offered.
Cheers,
Gervais
Gervais de Montbrun
Systems Administrator / silverorange Inc.
Phone +1 902 367 4532 ext. 104
<%2B1%20902%20367%204532%20ext.%20104> <tel:+1 902 367 4532 ext. 104
<%2B1%20902%20367%204532%20ext.%20104>>
Mobile +1 902 978 0009 <tel:+1 902 978
0009>
<hosted-engine--deploy-logs.zip>
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users <
http://lists.ovirt.org/mailman/listinfo/users>
--
Wee
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
3:53 p.m.
New subject: Adding another host to my cluster
This is a multi-part message in MIME format.
--------------030000020408000408030009
Content-Type: text/plain; charset=utf-8; format=flowed
Content-Transfer-Encoding: 7bit
Hi Gervais,
Okay, I see two problems: there are some leftover direcyories causing
issues and for some reason VDSM seems to be trying to bind to a port
something is already running on (probably an older version of VDSM.)
Try removing the duplicate dirs (rmdir
/var/run/vdsm/storage/248f46f0-d793-4581-9810-c9d965e2f286 and
/rhev/data-center/mnt - if they aren't empty don't rm -rf them because
they might be mounted from your production servers. Just mv -i them to
/root or somewhere.)
Next shutdown the vdsm service with "service vdsm stop" (I think,
might be service stop vdsm, I don't use CentOS much) and kill any
running vdsm processes (ps ax |grep vdsm) The error that I saw was:
MainThread::ERROR::2016-05-13
08:58:38,262::clientIF::128::vds::(__init__) failed to init clientIF,
shutting down storage dispatcher
MainThread::ERROR::2016-05-13 08:58:38,289::vdsm::171::vds::(run)
Exception raised
Traceback (most recent call last):
File "/usr/share/vdsm/vdsm", line 169, in run
serve_clients(log)
File "/usr/share/vdsm/vdsm", line 102, in serve_clients
cif = clientIF.getInstance(irs, log, scheduler)
File "/usr/share/vdsm/clientIF.py", line 193, in getInstance
cls._instance = clientIF(irs, log, scheduler)
File "/usr/share/vdsm/clientIF.py", line 123, in __init__
self._createAcceptor(host, port)
File "/usr/share/vdsm/clientIF.py", line 201, in _createAcceptor
port, sslctx)
File "/usr/share/vdsm/protocoldetector.py", line 170, in __init__
sock = _create_socket(host, port)
File "/usr/share/vdsm/protocoldetector.py", line 40, in _create_socket
server_socket.bind(addr[0][4])
File "/usr/lib64/python2.7/socket.py", line 224, in meth
return getattr(self._sock,name)(*args)
error: [Errno 98] Address already in use
If you get the same error, do a netstat -lnp and compare it to the same
from a working box to see if something else is running on the VDSM port.
On 2016-05-13 09:37 AM, Gervais de Montbrun wrote:
Hi Charles,
I think the problem I am having is due to the setup failing and not
something in vdsm configs as I have never gotten this server to start
up properly and the BRIDGE ethernet interface + ovirt routes are not
setup.
I put the logs here:
https://www.dropbox.com/sh/5ugyykqh1lgru9l/AACXxRYWr3tgd0WbBVFW5twHa?dl=0
hosted-engine--deploy-logs.zip# Logs from when I tried to deploy and
it failed
vdsm.tar.gz# /var/log/vdsm
Output from running vdsm from the command line:
[root@cultivar2 log]# su -s /bin/bash vdsm
[vdsm@cultivar2 log]$ python /usr/share/vdsm/vdsm
(PID: 6521) I am the actual vdsm 4.17.26-1.el7
cultivar2.grove.silverorange.com
<http://cultivar2.grove.silverorange.com/> (3.10.0-327.el7.x86_64)
VDSM will run with cpu affinity: frozenset([1])
/usr/bin/taskset --all-tasks --pid --cpu-list 1 6521 (cwd None)
SUCCESS: <err> = ''; <rc> = 0
Starting scheduler vdsm.Scheduler
started
Run and protect:
registerDomainStateChangeCallback(callbackFunc=<functools.partial
object at 0x381b158>)
Run and protect: registerDomainStateChangeCallback, Return
response: None
Trying to connect to Super Vdsm
Preparing MOM interface
Using named unix socket /var/run/vdsm/mom-vdsm.sock
Unregistering all secrests
trying to connect libvirt
recovery: started
Setting channels' timeout to 30 seconds.
Starting VM channels listener thread.
Listening at 0.0.0.0:54321 <http://0.0.0.0:54321>
Adding detector <rpc.bindingxmlrpc.XmlDetector instance at 0x3b4ecb0>
recovery: completed in 0s
Adding detector <yajsonrpc.stompreactor.StompDetector instance at
0x382e5a8>
Starting executor
Starting worker jsonrpc.Executor/0
Worker started
Starting worker jsonrpc.Executor/1
Worker started
Starting worker jsonrpc.Executor/2
Worker started
Starting worker jsonrpc.Executor/3
Worker started
Starting worker jsonrpc.Executor/4
Worker started
Starting worker jsonrpc.Executor/5
Worker started
Starting worker jsonrpc.Executor/6
Worker started
Starting worker jsonrpc.Executor/7
Worker started
XMLRPC server running
Starting executor
Starting worker periodic/0
Worker started
Starting worker periodic/1
Worker started
Starting worker periodic/2
Worker started
Starting worker periodic/3
Worker started
trying to connect libvirt
Panic: Connect to supervdsm service failed: [Errno 2] No such file
or directory
Traceback (most recent call last):
File "/usr/share/vdsm/supervdsm.py", line 78, in _connect
utils.retry(self._manager.connect, Exception, timeout=60, tries=3)
File "/usr/lib/python2.7/site-packages/vdsm/utils.py", line 959,
in retry
return func()
File "/usr/lib64/python2.7/multiprocessing/managers.py", line
500, in connect
conn = Client(self._address, authkey=self._authkey)
File "/usr/lib64/python2.7/multiprocessing/connection.py", line
173, in Client
c = SocketClient(address)
File "/usr/lib64/python2.7/multiprocessing/connection.py", line
308, in SocketClient
s.connect(address)
File "/usr/lib64/python2.7/socket.py", line 224, in meth
return getattr(self._sock,name)(*args)
error: [Errno 2] No such file or directory
Killed
Thanks for the help. It's really appreciated.
Cheers,
Gervais
On Fri, May 13, 2016 at 12:55 AM, Charles Tassell <ctassell(a)gmail.com
<mailto:ctassell@gmail.com>> wrote:
Hi Gervais,
Hmm, can you tar up the logfiles (/var/log/vdsm/* on the host
you are installing on) and put them somewhere to look at? Also, I
found that starting VDSM from the command line is useful as it
sometimes spits out error messages that don't show up in the
logs. I think the command I used was:
su -s /bin/bash vdsm
python /usr/share/vdsm/vdsm
My problem was that I customized the logging settings in
/etc/vdsm/*conf to try and tone down the debugging stuff and had a
syntax error.
On 16-05-12 10:24 PM, Gervais de Montbrun wrote:
> Hi Charles,
>
> Thanks for the suggestion.
>
> I cleaned up again using the bash script from the
> recoving-from-failed-install link below, then reinstalled (yum
> install ovirt-hosted-engine-setup).
>
> I enabled NetworkManager and firewalld as you suggested. The
> install stops very early on with an error:
> [ ERROR ] Failed to execute stage 'Programs detection':
> hosted-engine cannot be deployed while NetworkManager is running,
> please stop and disable it before proceeding
>
> I disabled and stopped NetworkManager and tried again. Same
> result. :(
>
> Any more guesses?
>
> Cheers,
> Gervais
>
>
>
>> On May 12, 2016, at 9:08 PM, Charles Tassell <ctassell(a)gmail.com
>> <mailto:ctassell@gmail.com>> wrote:
>>
>> Hey Gervais,
>>
>> Try enabling NetworkManager and firewalld before doing the
>> hosted-engine --deploy. I have run into problems with oVirt
>> trying to perform tasks on hosts where firewalld is disabled, so
>> maybe you are running into a similar problem. Also, I think the
>> setup script will disable NetworkManager if it needs to. I know
>> I didn't manually disable it on any of the boxes I installed on.
>>
>> On 16-05-12 04:49 PM, users-request(a)ovirt.org
>> <mailto:users-request@ovirt.org> wrote:
>>> Message: 1
>>> Date: Thu, 12 May 2016 14:22:12 -0300
>>> From: Gervais de Montbrun <gervais(a)demontbrun.com
>>> <mailto:gervais@demontbrun.com>>
>>> To: Wee Sritippho <wee.s(a)forest.go.th
<mailto:wee.s@forest.go.th>>
>>> Cc: users <users(a)ovirt.org <mailto:users@ovirt.org>>
>>> Subject: Re: [ovirt-users] Adding another host to my cluster
>>> Message-ID:
>>> <28B7FC74-5C52-4F60-B9F3-39A36621A7CA(a)demontbrun.com
>>> <mailto:28B7FC74-5C52-4F60-B9F3-39A36621A7CA@demontbrun.com>>
>>> Content-Type: text/plain; charset="utf-8"
>>>
>>> Hi Wee
>>> (and others)
>>>
>>> Thanks for the reply. I tried what you suggested, but I am in
>>> the exact same state. :-(
>>>
>>> I don't want to completely remove my hosted engine setup as it
>>> is working on the two other hosts in my cluster. I did not run
>>> the rm -rf stes listed here
>>>
(https://www.ovirt.org/documentation/how-to/hosted-engine/#recoving-from-f...
>>>
<https://www.ovirt.org/documentation/how-to/hosted-engine/#recoving-from-f...>)
>>> that would wipe my hosted_engine nfs mount. If you know that
>>> this is 100% necessary, please let me know.
>>>
>>> I did:
>>> hosted-engine --clean-metadata --force-cleanup --host-id=3
>>> run the bash script to remove all of the ovirt packages and
>>> config files
>>> reinstalled ovirt-hosted-engine-setup
>>> ran "hosted-engine --deploy"
>>>
>>> I'm back exactly where I started. Is there a way to run just
>>> the network configuration part of the deploy?
>>>
>>> Since the last attempt, I did upgrade my hosted engine and my
>>> cluster is now running oVirt 3.6.5.
>>>
>>> Cheers,
>>> Gervais
>>>
>>>
>>>
>>>> On May 12, 2016, at 11:50 AM, Wee Sritippho
>>>> <wee.s(a)forest.go.th <mailto:wee.s@forest.go.th>> wrote:
>>>>
>>>> Hi,
>>>>
>>>> I used to have a similar problem where one of my host can't be
>>>> deployed due to the absence of ovirtmgmt bridge. Simone said
>>>> it's a bug ( https://bugzilla.redhat.com/1323465
>>>> <https://bugzilla.redhat.com/1323465> ) which would be fixed
>>>> in 3.6.6.
>>>>
>>>> This is what I've done to solve it:
>>>>
>>>> 1. In the web UI, set the failed host to maintenance.
>>>> 2. Remove it.
>>>> 3. In that host, run a script from
>>>>
https://www.ovirt.org/documentation/how-to/hosted-engine/#recoving-from-f...
>>>>
<https://www.ovirt.org/documentation/how-to/hosted-engine/#recoving-from-f...
>>>> 4. Install ovirt-hosted-engine-setup again.
>>>> 5. Redeploy again.
>>>>
>>>> Hope that helps
>>>>
>>>> On 11 ??????? 2016 22 ?????? 48 ???? 58 ?????? GMT+07:00,
>>>> Gervais de Montbrun <gervais(a)demontbrun.com
>>>> <mailto:gervais@demontbrun.com>> wrote:
>>>> Hi Folks,
>>>>
>>>> I hate to reply to my own message, but I'm really hoping
>>>> someone can help me with my issue
>>>> http://lists.ovirt.org/pipermail/users/2016-May/039690.html
>>>> <http://lists.ovirt.org/pipermail/users/2016-May/039690.html>
>>>>
>>>> Does anyone have a suggestion for me? If there is any more
>>>> information that I can provide that would help you to help me,
>>>> please advise.
>>>>
>>>> Cheers,
>>>> Gervais
>>>>
>>>>
>>>>
>>>>> On May 9, 2016, at 1:42 PM, Gervais de Montbrun
>>>>> <gervais(a)demontbrun.com <mailto:gervais@demontbrun.com>
>>>>> <mailto:gervais@demontbrun.com
>>>>> <mailto:gervais@demontbrun.com>>> wrote:
>>>>>
>>>>> Hi All,
>>>>>
>>>>> I'm trying to add a third host into my oVirt cluster. I have
>>>>> hosted engine setup on the first two. It's failing to finish
>>>>> the hosted-engine --deploy on this third host. I wiped the
>>>>> server and did a CentOS 7 minimum install and ran it again to
>>>>> have a clean machine.
>>>>>
>>>>> My setup:
>>>>> CentOS 7 clean install
>>>>> yum install -y
>>>>> http://resources.ovirt.org/pub/yum-repo/ovirt-release36.rpm
>>>>>
<http://resources.ovirt.org/pub/yum-repo/ovirt-release36.rpm>
>>>>> yum install -y ovirt-hosted-engine-setup
>>>>> yum upgrade -y && reboot
>>>>> systemctl disable NetworkManager ; systemctl stop
>>>>> NetworkManager ; systemctl disable firewalld ; systemctl stop
>>>>> firewalld
>>>>> hosted-engine --deploy
>>>>>
>>>>> hosted-engine --deploy always throws an error:
>>>>> [ ERROR ] The VDSM host was found in a failed state. Please
>>>>> check engine and bootstrap installation logs.
>>>>> [ ERROR ] Unable to add Cultivar2 to the manager
>>>>> and then echo's
>>>>> [ INFO ] Waiting for VDSM hardware info
>>>>> ...
>>>>> [ ERROR ] Failed to execute stage 'Closing up': VDSM did
not
>>>>> start within 120 seconds
>>>>> [ INFO ] Stage: Clean up
>>>>> [ INFO ] Generating answer file
>>>>>
'/var/lib/ovirt-hosted-engine-setup/answers/answers-20160509131103.conf'
>>>>> [ INFO ] Stage: Pre-termination
>>>>> [ INFO ] Stage: Termination
>>>>> [ ERROR ] Hosted Engine deployment failed: this system is not
>>>>> reliable, please check the issue, fix and redeploy
>>>>> Log file is located at
>>>>>
/var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20160509130658-qb8ev0.log
>>>>>
>>>>> Full output of hosted-engine --deploy included in the
>>>>> attached zip file.
>>>>> I've also included vdsm.log (There is more than one tries
>>>>> worth of tries in there).
>>>>> You'll also find the
>>>>> ovirt-hosted-engine-setup-20160509130658-qb8ev0.log listed
above.
>>>>>
>>>>> This is my "test" setup. Cultivar0 is my first host and
my
>>>>> nfs server for storage. I have two hosts in the setup already
>>>>> and everything is working fine. The host does show up in the
>>>>> oVirt admin, but shows "Installed Failed"
>>>>> <PastedGraphic-1.png>
>>>>>
>>>>> Trying to reinstall from within the interface just fails again.
>>>>>
>>>>> The ovirt bridge interface is not configured and there are no
>>>>> config files in /etc/sysconfi/network-scripts related to ovirt.
>>>>>
>>>>> OS:
>>>>> [root@cultivar2 ovirt-hosted-engine-setup]# cat
>>>>> /etc/redhat-release
>>>>> CentOS Linux release 7.2.1511 (Core)
>>>>>
>>>>> [root@cultivar2 ovirt-hosted-engine-setup]# uname -a
>>>>> Linux cultivar2.grove.silverorange.com
>>>>> <http://cultivar2.grove.silverorange.com>
>>>>> <http://cultivar2.grove.silverorange.com/>
>>>>> 3.10.0-327.13.1.el7.x86_64 #1 SMP Thu Mar 31 16:04:38 UTC
>>>>> 2016 x86_64 x86_64 x86_64 GNU/Linux
>>>>>
>>>>> Versions:
>>>>> [root@cultivar2 ovirt-hosted-engine-setup]# rpm -qa | grep -i
>>>>> ovirt
>>>>> libgovirt-0.3.3-1.el7_2.1.x86_64
>>>>> ovirt-hosted-engine-setup-1.3.5.0-1.1.el7.noarch
>>>>> ovirt-host-deploy-1.4.1-1.el7.centos.noarch
>>>>> ovirt-vmconsole-1.0.0-1.el7.centos.noarch
>>>>> ovirt-vmconsole-host-1.0.0-1.el7.centos.noarch
>>>>> ovirt-release36-007-1.noarch
>>>>> ovirt-engine-sdk-python-3.6.5.0-1.el7.centos.noarch
>>>>> ovirt-setup-lib-1.0.1-1.el7.centos.noarch
>>>>> ovirt-hosted-engine-ha-1.3.5.3-1.1.el7.noarch
>>>>> [root@cultivar2 ovirt-hosted-engine-setup]#
>>>>> [root@cultivar2 ovirt-hosted-engine-setup]#
>>>>> [root@cultivar2 ovirt-hosted-engine-setup]#
>>>>> [root@cultivar2 ovirt-hosted-engine-setup]# rpm -qa | grep -i
>>>>> virt
>>>>> libvirt-daemon-driver-secret-1.2.17-13.el7_2.4.x86_64
>>>>> virt-viewer-2.0-6.el7.x86_64
>>>>> libgovirt-0.3.3-1.el7_2.1.x86_64
>>>>> libvirt-daemon-kvm-1.2.17-13.el7_2.4.x86_64
>>>>> ovirt-hosted-engine-setup-1.3.5.0-1.1.el7.noarch
>>>>> fence-virt-0.3.2-2.el7.x86_64
>>>>> virt-what-1.13-6.el7.x86_64
>>>>> libvirt-python-1.2.17-2.el7.x86_64
>>>>> libvirt-daemon-1.2.17-13.el7_2.4.x86_64
>>>>> libvirt-daemon-config-nwfilter-1.2.17-13.el7_2.4.x86_64
>>>>> libvirt-lock-sanlock-1.2.17-13.el7_2.4.x86_64
>>>>> libvirt-daemon-driver-nodedev-1.2.17-13.el7_2.4.x86_64
>>>>> libvirt-daemon-driver-network-1.2.17-13.el7_2.4.x86_64
>>>>> libvirt-daemon-driver-storage-1.2.17-13.el7_2.4.x86_64
>>>>> ovirt-host-deploy-1.4.1-1.el7.centos.noarch
>>>>> virt-v2v-1.28.1-1.55.el7.centos.2.x86_64
>>>>> ovirt-vmconsole-1.0.0-1.el7.centos.noarch
>>>>> ovirt-vmconsole-host-1.0.0-1.el7.centos.noarch
>>>>> libvirt-client-1.2.17-13.el7_2.4.x86_64
>>>>> libvirt-daemon-driver-nwfilter-1.2.17-13.el7_2.4.x86_64
>>>>> ovirt-release36-007-1.noarch
>>>>> libvirt-daemon-driver-interface-1.2.17-13.el7_2.4.x86_64
>>>>> libvirt-daemon-driver-qemu-1.2.17-13.el7_2.4.x86_64
>>>>> ovirt-engine-sdk-python-3.6.5.0-1.el7.centos.noarch
>>>>> ovirt-setup-lib-1.0.1-1.el7.centos.noarch
>>>>> ovirt-hosted-engine-ha-1.3.5.3-1.1.el7.noarch
>>>>>
>>>>> I also have a series of stuck tasks that I can't clear
>>>>> related to the host that can't be added... This is a
>>>>> secondary issue and I don't want to get off track, but they
>>>>> look like this:
>>>>> <PastedGraphic-2.png>
>>>>>
>>>>> I'd appreciate any help that can be offered.
>>>>>
>>>>> Cheers,
>>>>> Gervais
>>>>>
>>>>>
>>>>> Gervais de Montbrun
>>>>> Systems Administrator / silverorange Inc.
>>>>>
>>>>> Phone +1 902 367 4532 ext. 104
>>>>> <tel:%2B1%20902%20367%204532%20ext.%20104> <tel:+1 902
367
>>>>> 4532 ext. 104
<tel:%2B1%20902%20367%204532%20ext.%20104>>
>>>>> Mobile +1 902 978 0009 <tel:%2B1%20902%20978%200009>
<tel:+1
>>>>> 902 978 0009 <tel:%2B1%20902%20978%200009>>
>>>>>
>>>>> <hosted-engine--deploy-logs.zip>
>>>>
>>>>
>>>> Users mailing list
>>>> Users(a)ovirt.org <mailto:Users@ovirt.org>
>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>> <http://lists.ovirt.org/mailman/listinfo/users>
>>>>
>>>> --
>>>> Wee
>>>
>>
>> _______________________________________________
>> Users mailing list
>> Users(a)ovirt.org <mailto:Users@ovirt.org>
>> http://lists.ovirt.org/mailman/listinfo/users
>
--------------030000020408000408030009
Content-Type: text/html; charset=utf-8
Content-Transfer-Encoding: 8bit
<html>
<head>
<meta content="text/html; charset=utf-8"
http-equiv="Content-Type">
</head>
<body bgcolor="#FFFFFF" text="#000000">
<div class="moz-cite-prefix">Hi Gervais,<br>
<br>
Okay, I see two problems: there are some leftover direcyories
causing issues and for some reason VDSM seems to be trying to bind
to a port something is already running on (probably an older
version of VDSM.) Try removing the duplicate dirs (rmdir
/var/run/vdsm/storage/248f46f0-d793-4581-9810-c9d965e2f286 and
/rhev/data-center/mnt - if they aren't empty don't rm -rf them
because they might be mounted from your production servers. Just
mv -i them to /root or somewhere.)<br>
<br>
Next shutdown the vdsm service with "service vdsm stop" (I
think, might be service stop vdsm, I don't use CentOS much) and
kill any running vdsm processes (ps ax |grep vdsm) The error that
I saw was:<br>
<br>
MainThread::ERROR::2016-05-13
08:58:38,262::clientIF::128::vds::(__init__) failed to init
clientIF, shutting down storage dispatcher<br>
MainThread::ERROR::2016-05-13 08:58:38,289::vdsm::171::vds::(run)
Exception raised<br>
Traceback (most recent call last):<br>
File "/usr/share/vdsm/vdsm", line 169, in run<br>
serve_clients(log)<br>
File "/usr/share/vdsm/vdsm", line 102, in serve_clients<br>
cif = clientIF.getInstance(irs, log, scheduler)<br>
File "/usr/share/vdsm/clientIF.py", line 193, in getInstance<br>
cls._instance = clientIF(irs, log, scheduler)<br>
File "/usr/share/vdsm/clientIF.py", line 123, in __init__<br>
self._createAcceptor(host, port)<br>
File "/usr/share/vdsm/clientIF.py", line 201, in
_createAcceptor<br>
port, sslctx)<br>
File "/usr/share/vdsm/protocoldetector.py", line 170, in
__init__<br>
sock = _create_socket(host, port)<br>
File "/usr/share/vdsm/protocoldetector.py", line 40, in
_create_socket<br>
server_socket.bind(addr[0][4])<br>
File "/usr/lib64/python2.7/socket.py", line 224, in meth<br>
return getattr(self._sock,name)(*args)<br>
error: [Errno 98] Address already in use<br>
<br>
If you get the same error, do a netstat -lnp and compare it to the
same from a working box to see if something else is running on the
VDSM port.<br>
<br>
<br>
On 2016-05-13 09:37 AM, Gervais de Montbrun wrote:<br>
</div>
<blockquote
cite="mid:CAESCRhO-o2my2MqO0-GXzW=y0eyK0YdUpGkJN8Mq_wnXxn_QBA@mail.gmail.com"
type="cite">
<div dir="ltr"><span
style="color:rgb(0,0,0);font-family:Helvetica;font-size:12px">Hi
Charles,</span>
<div class=""
style="color:rgb(0,0,0);font-family:Helvetica;font-size:12px"><br
class="">
</div>
<div class=""
style="color:rgb(0,0,0);font-family:Helvetica;font-size:12px">I
think the problem I am having is due to the setup failing and
not something in vdsm configs as I have never gotten this
server to start up properly and the BRIDGE ethernet interface
+ ovirt routes are not setup.</div>
<div class=""
style="color:rgb(0,0,0);font-family:Helvetica;font-size:12px"><br
class="">
</div>
<div class=""
style="color:rgb(0,0,0);font-family:Helvetica;font-size:12px">I
put the logs here: <a moz-do-not-send="true"
href="https://www.dropbox.com/sh/5ugyykqh1lgru9l/AACXxRYWr3tgd0WbBVF...
class="">https://www.dropbox.com/sh/5ugyykqh1lgru9l/AACXxRYW...
<div class=""
style="color:rgb(0,0,0);font-family:Helvetica;font-size:12px"><br
class="">
</div>
<div class=""
style="color:rgb(0,0,0);font-family:Helvetica;font-size:12px">hosted-engine--deploy-logs.zip<span
class="" style="white-space:pre"> </span>#
Logs from when I tried to deploy and it failed</div>
<div class=""
style="color:rgb(0,0,0);font-family:Helvetica;font-size:12px">vdsm.tar.gz<span
class="" style="white-space:pre"> </span>#
/var/log/vdsm</div>
<div class=""
style="color:rgb(0,0,0);font-family:Helvetica;font-size:12px"><br
class="">
</div>
<div class=""
style="color:rgb(0,0,0);font-family:Helvetica;font-size:12px">Output
from running vdsm from the command line:</div>
<blockquote class=""
style="color:rgb(0,0,0);font-family:Helvetica;font-size:12px;margin:0px
0px 0px 40px;border:none;padding:0px">
<div class="">[root@cultivar2 log]# su -s /bin/bash
vdsm</div>
<div class="">[vdsm@cultivar2 log]$ python
/usr/share/vdsm/vdsm</div>
<div class="">(PID: 6521) I am the actual vdsm
4.17.26-1.el7 <a
moz-do-not-send="true"
href="http://cultivar2.grove.silverorange.com/"
class="">cultivar2.grove.silverorange.com</a> (3.10.0-327.el7.x86_64)</div>
<div class="">VDSM will run with cpu affinity:
frozenset([1])</div>
<div class="">/usr/bin/taskset --all-tasks --pid --cpu-list 1
6521 (cwd None)</div>
<div class="">SUCCESS: <err> = '';
<rc> = 0</div>
<div class="">Starting scheduler vdsm.Scheduler</div>
<div class="">started</div>
<div class="">Run and protect:
registerDomainStateChangeCallback(callbackFunc=<functools.partial
object at 0x381b158>)</div>
<div class="">Run and protect:
registerDomainStateChangeCallback, Return response: None</div>
<div class="">Trying to connect to Super Vdsm</div>
<div class="">Preparing MOM interface</div>
<div class="">Using named unix socket
/var/run/vdsm/mom-vdsm.sock</div>
<div class="">Unregistering all secrests</div>
<div class="">trying to connect libvirt</div>
<div class="">recovery: started</div>
<div class="">Setting channels' timeout to 30
seconds.</div>
<div class="">Starting VM channels listener thread.</div>
<div class="">Listening at <a
moz-do-not-send="true"
href="http://0.0.0.0:54321">0.0.0.0:54321</a></div>
<div class="">Adding detector
<rpc.bindingxmlrpc.XmlDetector instance at
0x3b4ecb0></div>
<div class="">recovery: completed in 0s</div>
<div class="">Adding detector
<yajsonrpc.stompreactor.StompDetector instance at
0x382e5a8></div>
<div class="">Starting executor</div>
<div class="">Starting worker jsonrpc.Executor/0</div>
<div class="">Worker started</div>
<div class="">Starting worker jsonrpc.Executor/1</div>
<div class="">Worker started</div>
<div class="">Starting worker jsonrpc.Executor/2</div>
<div class="">Worker started</div>
<div class="">Starting worker jsonrpc.Executor/3</div>
<div class="">Worker started</div>
<div class="">Starting worker jsonrpc.Executor/4</div>
<div class="">Worker started</div>
<div class="">Starting worker jsonrpc.Executor/5</div>
<div class="">Worker started</div>
<div class="">Starting worker jsonrpc.Executor/6</div>
<div class="">Worker started</div>
<div class="">Starting worker jsonrpc.Executor/7</div>
<div class="">Worker started</div>
<div class="">XMLRPC server running</div>
<div class="">Starting executor</div>
<div class="">Starting worker periodic/0</div>
<div class="">Worker started</div>
<div class="">Starting worker periodic/1</div>
<div class="">Worker started</div>
<div class="">Starting worker periodic/2</div>
<div class="">Worker started</div>
<div class="">Starting worker periodic/3</div>
<div class="">Worker started</div>
<div class="">trying to connect libvirt</div>
<div class="">Panic: Connect to supervdsm service failed:
[Errno 2] No such file or directory</div>
<div class="">Traceback (most recent call last):</div>
<div class=""> File "/usr/share/vdsm/supervdsm.py",
line 78,
in _connect</div>
<div class=""> utils.retry(self._manager.connect,
Exception, timeout=60, tries=3)</div>
<div class=""> File
"/usr/lib/python2.7/site-packages/vdsm/utils.py", line 959,
in retry</div>
<div class=""> return func()</div>
<div class=""> File
"/usr/lib64/python2.7/multiprocessing/managers.py", line
500, in connect</div>
<div class=""> conn = Client(self._address,
authkey=self._authkey)</div>
<div class=""> File
"/usr/lib64/python2.7/multiprocessing/connection.py", line
173, in Client</div>
<div class=""> c = SocketClient(address)</div>
<div class=""> File
"/usr/lib64/python2.7/multiprocessing/connection.py", line
308, in SocketClient</div>
<div class=""> s.connect(address)</div>
<div class=""> File "/usr/lib64/python2.7/socket.py",
line
224, in meth</div>
<div class=""> return
getattr(self._sock,name)(*args)</div>
<div class="">error: [Errno 2] No such file or
directory</div>
<div class="">Killed</div>
</blockquote>
<div class=""
style="color:rgb(0,0,0);font-family:Helvetica;font-size:12px">
<div class=""><br class="">
</div>
<div class="">Thanks for the help. It's really
appreciated.</div>
<div class="">
<div id="signature" class=""><br
class="">
Cheers,<br class="">
Gervais</div>
</div>
</div>
</div>
<div class="gmail_extra"><br>
<div class="gmail_quote">On Fri, May 13, 2016 at 12:55 AM,
Charles Tassell <span dir="ltr"><<a
moz-do-not-send="true"
href="mailto:ctassell@gmail.com"
target="_blank">ctassell(a)gmail.com</a>&gt;</span>
wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0
.8ex;border-left:1px #ccc solid;padding-left:1ex">
<div text="#000000" bgcolor="#FFFFFF">
<div>Hi Gervais,<br>
<br>
Hmm, can you tar up the logfiles (/var/log/vdsm/* on
the host you are installing on) and put them somewhere
to look at? Also, I found that starting VDSM from the
command line is useful as it sometimes spits out error
messages that don't show up in the logs. I think the
command I used was:<br>
su -s /bin/bash vdsm<br>
python /usr/share/vdsm/vdsm<br>
<br>
My problem was that I customized the logging settings in
/etc/vdsm/*conf to try and tone down the debugging stuff
and had a syntax error.
<div>
<div class="h5"><br>
<br>
On 16-05-12 10:24 PM, Gervais de Montbrun wrote:<br>
</div>
</div>
</div>
<div>
<div class="h5">
<blockquote type="cite">
<div dir="ltr">
<div dir="auto"
style="word-wrap:break-word">Hi
Charles,<br>
<br>
Thanks for the suggestion.<br>
<br>
I cleaned up again using the bash script from
the recoving-from-failed-install link below,
then reinstalled (yum install
ovirt-hosted-engine-setup).<br>
<br>
I enabled NetworkManager and firewalld as you
suggested. The install stops very early on with
an error:<br>
<span
style="white-space:pre-wrap"> </span>[
ERROR ] Failed to execute stage 'Programs
detection': hosted-engine cannot be deployed
while NetworkManager is running, please stop and
disable it before proceeding <br>
<br>
I disabled and stopped NetworkManager and tried
again. Same result. :(<br>
<br>
Any more guesses?<br>
<br>
Cheers,<br>
Gervais<br>
<br>
<br>
<br>
<blockquote type="cite">On May 12, 2016, at 9:08
PM, Charles Tassell <<a
moz-do-not-send="true"
href="mailto:ctassell@gmail.com"
target="_blank"><a
class="moz-txt-link-abbreviated"
href="mailto:ctassell@gmail.com">ctassell@gmail.com</a></a>>
wrote:<br>
<br>
Hey Gervais,<br>
<br>
Try enabling NetworkManager and firewalld
before doing the hosted-engine --deploy. I
have run into problems with oVirt trying to
perform tasks on hosts where firewalld is
disabled, so maybe you are running into a
similar problem. Also, I think the setup
script will disable NetworkManager if it needs
to. I know I didn't manually disable it on
any of the boxes I installed on.<br>
<br>
On 16-05-12 04:49 PM, <a
moz-do-not-send="true"
href="mailto:users-request@ovirt.org"
target="_blank"><a
class="moz-txt-link-abbreviated"
href="mailto:users-request@ovirt.org">users-request@ovirt.org</a></a>
wrote:<br>
<blockquote type="cite">Message: 1<br>
Date: Thu, 12 May 2016 14:22:12 -0300<br>
From: Gervais de Montbrun <<a
moz-do-not-send="true"
href="mailto:gervais@demontbrun.com"
target="_blank"><a
class="moz-txt-link-abbreviated"
href="mailto:gervais@demontbrun.com">gervais@demontbrun.com</a></a>><br>
To: Wee Sritippho <<a
moz-do-not-send="true"
href="mailto:wee.s@forest.go.th"
target="_blank"><a
class="moz-txt-link-abbreviated"
href="mailto:wee.s@forest.go.th">wee.s@forest.go.th</a></a>><br>
Cc: users <<a moz-do-not-send="true"
href="mailto:users@ovirt.org"
target="_blank">users(a)ovirt.org</a>&gt;<br>
Subject: Re: [ovirt-users] Adding another
host to my cluster<br>
Message-ID: <<a moz-do-not-send="true"
href="mailto:28B7FC74-5C52-4F60-B9F3-39A36621A7CA@demontbrun.com"
target="_blank">28B7FC74-5C52-4F60-B9F3-39A36621A7CA(a)demontbrun.com</a>&gt;<br>
Content-Type: text/plain; charset="utf-8"<br>
<br>
Hi Wee<br>
(and others)<br>
<br>
Thanks for the reply. I tried what you
suggested, but I am in the exact same state.
:-(<br>
<br>
I don't want to completely remove my hosted
engine setup as it is working on the two
other hosts in my cluster. I did not run the
rm -rf stes listed here (<a
moz-do-not-send="true"
href="https://www.ovirt.org/documentation/how-to/hosted-engine/#reco...
target="_blank"><a
class="moz-txt-link-freetext"
href="https://www.ovirt.org/documentation/how-to/hosted-engine/#reco...
<<a moz-do-not-send="true"
href="https://www.ovirt.org/documentation/how-to/hosted-engine/#reco...
target="_blank">https://www.ovirt.org/documentation/how-to/h...)
that would wipe my hosted_engine nfs mount.
If you know that this is 100% necessary,
please let me know.<br>
<br>
I did:<br>
hosted-engine --clean-metadata
--force-cleanup --host-id=3<br>
run the bash script to remove all of the
ovirt packages and config files<br>
reinstalled ovirt-hosted-engine-setup<br>
ran "hosted-engine --deploy"<br>
<br>
I'm back exactly where I started. Is there a
way to run just the network configuration
part of the deploy?<br>
<br>
Since the last attempt, I did upgrade my
hosted engine and my cluster is now running
oVirt 3.6.5.<br>
<br>
Cheers,<br>
Gervais<br>
<br>
<br>
<br>
<blockquote type="cite">On May 12, 2016, at
11:50 AM, Wee Sritippho <<a
moz-do-not-send="true"
href="mailto:wee.s@forest.go.th"
target="_blank"><a
class="moz-txt-link-abbreviated"
href="mailto:wee.s@forest.go.th">wee.s@forest.go.th</a></a>>
wrote:<br>
<br>
Hi,<br>
<br>
I used to have a similar problem where one
of my host can't be deployed due to the
absence of ovirtmgmt bridge. Simone said
it's a bug ( <a moz-do-not-send="true"
href="https://bugzilla.redhat.com/1323465"
target="_blank">https://bugzilla.redhat.com/1323465</a>
<<a moz-do-not-send="true"
href="https://bugzilla.redhat.com/1323465"
target="_blank">https://bugzilla.redhat.com/1323465</a>...
) which would be fixed in 3.6.6.<br>
<br>
This is what I've done to solve it:<br>
<br>
1. In the web UI, set the failed host to
maintenance.<br>
2. Remove it.<br>
3. In that host, run a script from <a
moz-do-not-send="true"
href="https://www.ovirt.org/documentation/how-to/hosted-engine/#reco...
target="_blank"><a
class="moz-txt-link-freetext"
href="https://www.ovirt.org/documentation/how-to/hosted-engine/#reco...
<<a moz-do-not-send="true"
href="https://www.ovirt.org/documentation/how-to/hosted-engine/#reco...
target="_blank">https://www.ovirt.org/documentation/how-to/h...
4. Install ovirt-hosted-engine-setup
again.<br>
5. Redeploy again.<br>
<br>
Hope that helps<br>
<br>
On 11 ??????? 2016 22 ?????? 48 ???? 58
?????? GMT+07:00, Gervais de Montbrun <<a
moz-do-not-send="true"
href="mailto:gervais@demontbrun.com"
target="_blank"><a
class="moz-txt-link-abbreviated"
href="mailto:gervais@demontbrun.com">gervais@demontbrun.com</a></a>>
wrote:<br>
Hi Folks,<br>
<br>
I hate to reply to my own message, but I'm
really hoping someone can help me with my
issue<br>
<a moz-do-not-send="true"
href="http://lists.ovirt.org/pipermail/users/2016-May/039690.html"
target="_blank">http://lists.ovirt.org/pipermail/users/2016-...
<<a moz-do-not-send="true"
href="http://lists.ovirt.org/pipermail/users/2016-May/039690.html"
target="_blank">http://lists.ovirt.org/pipermail/users/2016-...
<br>
Does anyone have a suggestion for me? If
there is any more information that I can
provide that would help you to help me,
please advise.<br>
<br>
Cheers,<br>
Gervais<br>
<br>
<br>
<br>
<blockquote type="cite">On May 9, 2016, at
1:42 PM, Gervais de Montbrun <<a
moz-do-not-send="true"
href="mailto:gervais@demontbrun.com"
target="_blank"><a
class="moz-txt-link-abbreviated"
href="mailto:gervais@demontbrun.com">gervais@demontbrun.com</a></a>
<mailto:<a moz-do-not-send="true"
href="mailto:gervais@demontbrun.com"
target="_blank">gervais(a)demontbrun.com</a>&gt;&gt;
wrote:<br>
<br>
Hi All,<br>
<br>
I'm trying to add a third host into my
oVirt cluster. I have hosted engine
setup on the first two. It's failing to
finish the hosted-engine --deploy on
this third host. I wiped the server and
did a CentOS 7 minimum install and ran
it again to have a clean machine.<br>
<br>
My setup:<br>
CentOS 7 clean install<br>
yum install -y <a
moz-do-not-send="true"
href="http://resources.ovirt.org/pub/yum-repo/ovirt-release36.rpm"
target="_blank"><a
class="moz-txt-link-freetext"
href="http://resources.ovirt.org/pub/yum-repo/ovirt-release36.rpm&qu...
<<a moz-do-not-send="true"
href="http://resources.ovirt.org/pub/yum-repo/ovirt-release36.rpm"
target="_blank">http://resources.ovirt.org/pub/yum-repo/ovir...
yum install -y ovirt-hosted-engine-setup<br>
yum upgrade -y && reboot<br>
systemctl disable NetworkManager ;
systemctl stop NetworkManager ;
systemctl disable firewalld ; systemctl
stop firewalld<br>
hosted-engine --deploy<br>
<br>
hosted-engine --deploy always throws an
error:<br>
[ ERROR ] The VDSM host was found in a
failed state. Please check engine and
bootstrap installation logs.<br>
[ ERROR ] Unable to add Cultivar2 to the
manager<br>
and then echo's<br>
[ INFO ] Waiting for VDSM hardware info<br>
...<br>
[ ERROR ] Failed to execute stage
'Closing up': VDSM did not start within
120 seconds<br>
[ INFO ] Stage: Clean up<br>
[ INFO ] Generating answer file
'/var/lib/ovirt-hosted-engine-setup/answers/answers-20160509131103.conf'<br>
[ INFO ] Stage: Pre-termination<br>
[ INFO ] Stage: Termination<br>
[ ERROR ] Hosted Engine deployment
failed: this system is not reliable,
please check the issue, fix and redeploy<br>
Log file is located at
/var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20160509130658-qb8ev0.log<br>
<br>
Full output of hosted-engine --deploy
included in the attached zip file.<br>
I've also included vdsm.log (There is
more than one tries worth of tries in
there).<br>
You'll also find the
ovirt-hosted-engine-setup-20160509130658-qb8ev0.log
listed above.<br>
<br>
This is my "test" setup. Cultivar0 is my
first host and my nfs server for
storage. I have two hosts in the setup
already and everything is working fine.
The host does show up in the oVirt
admin, but shows "Installed Failed"<br>
<PastedGraphic-1.png><br>
<br>
Trying to reinstall from within the
interface just fails again.<br>
<br>
The ovirt bridge interface is not
configured and there are no config files
in /etc/sysconfi/network-scripts related
to ovirt.<br>
<br>
OS:<br>
[root@cultivar2
ovirt-hosted-engine-setup]# cat
/etc/redhat-release<br>
CentOS Linux release 7.2.1511 (Core)<br>
<br>
[root@cultivar2
ovirt-hosted-engine-setup]# uname -a<br>
Linux <a moz-do-not-send="true"
href="http://cultivar2.grove.silverorange.com"
target="_blank">cultivar2.grove.silverorange.com</a>
<<a moz-do-not-send="true"
href="http://cultivar2.grove.silverorange.com/"
target="_blank">http://cultivar2.grove.silverorange.com/<...
3.10.0-327.13.1.el7.x86_64 #1 SMP Thu
Mar 31 16:04:38 UTC 2016 x86_64 x86_64
x86_64 GNU/Linux<br>
<br>
Versions:<br>
[root@cultivar2
ovirt-hosted-engine-setup]# rpm -qa |
grep -i ovirt<br>
libgovirt-0.3.3-1.el7_2.1.x86_64<br>
ovirt-hosted-engine-setup-1.3.5.0-1.1.el7.noarch<br>
ovirt-host-deploy-1.4.1-1.el7.centos.noarch<br>
ovirt-vmconsole-1.0.0-1.el7.centos.noarch<br>
ovirt-vmconsole-host-1.0.0-1.el7.centos.noarch<br>
ovirt-release36-007-1.noarch<br>
ovirt-engine-sdk-python-3.6.5.0-1.el7.centos.noarch<br>
ovirt-setup-lib-1.0.1-1.el7.centos.noarch<br>
ovirt-hosted-engine-ha-1.3.5.3-1.1.el7.noarch<br>
[root@cultivar2
ovirt-hosted-engine-setup]#<br>
[root@cultivar2
ovirt-hosted-engine-setup]#<br>
[root@cultivar2
ovirt-hosted-engine-setup]#<br>
[root@cultivar2
ovirt-hosted-engine-setup]# rpm -qa |
grep -i virt<br>
libvirt-daemon-driver-secret-1.2.17-13.el7_2.4.x86_64<br>
virt-viewer-2.0-6.el7.x86_64<br>
libgovirt-0.3.3-1.el7_2.1.x86_64<br>
libvirt-daemon-kvm-1.2.17-13.el7_2.4.x86_64<br>
ovirt-hosted-engine-setup-1.3.5.0-1.1.el7.noarch<br>
fence-virt-0.3.2-2.el7.x86_64<br>
virt-what-1.13-6.el7.x86_64<br>
libvirt-python-1.2.17-2.el7.x86_64<br>
libvirt-daemon-1.2.17-13.el7_2.4.x86_64<br>
libvirt-daemon-config-nwfilter-1.2.17-13.el7_2.4.x86_64<br>
libvirt-lock-sanlock-1.2.17-13.el7_2.4.x86_64<br>
libvirt-daemon-driver-nodedev-1.2.17-13.el7_2.4.x86_64<br>
libvirt-daemon-driver-network-1.2.17-13.el7_2.4.x86_64<br>
libvirt-daemon-driver-storage-1.2.17-13.el7_2.4.x86_64<br>
ovirt-host-deploy-1.4.1-1.el7.centos.noarch<br>
virt-v2v-1.28.1-1.55.el7.centos.2.x86_64<br>
ovirt-vmconsole-1.0.0-1.el7.centos.noarch<br>
ovirt-vmconsole-host-1.0.0-1.el7.centos.noarch<br>
libvirt-client-1.2.17-13.el7_2.4.x86_64<br>
libvirt-daemon-driver-nwfilter-1.2.17-13.el7_2.4.x86_64<br>
ovirt-release36-007-1.noarch<br>
libvirt-daemon-driver-interface-1.2.17-13.el7_2.4.x86_64<br>
libvirt-daemon-driver-qemu-1.2.17-13.el7_2.4.x86_64<br>
ovirt-engine-sdk-python-3.6.5.0-1.el7.centos.noarch<br>
ovirt-setup-lib-1.0.1-1.el7.centos.noarch<br>
ovirt-hosted-engine-ha-1.3.5.3-1.1.el7.noarch<br>
<br>
I also have a series of stuck tasks that
I can't clear related to the host that
can't be added... This is a secondary
issue and I don't want to get off track,
but they look like this:<br>
<PastedGraphic-2.png><br>
<br>
I'd appreciate any help that can be
offered.<br>
<br>
Cheers,<br>
Gervais<br>
<br>
<br>
Gervais de Montbrun<br>
Systems Administrator / silverorange
Inc.<br>
<br>
Phone <span
style="white-space:pre-wrap"> </span><a
moz-do-not-send="true"
href="tel:%2B1%20902%20367%204532%20ext.%20104"
value="+19023674532"
target="_blank">+1
902 367 4532 ext. 104</a> <tel:<a
moz-do-not-send="true"
href="tel:%2B1%20902%20367%204532%20ext.%20104"
value="+19023674532"
target="_blank">+1
902 367 4532 ext. 104</a>><br>
Mobile
<span
style="white-space:pre-wrap"> </span><a
moz-do-not-send="true"
href="tel:%2B1%20902%20978%200009"
value="+19029780009"
target="_blank">+1
902 978 0009</a> <tel:<a
moz-do-not-send="true"
href="tel:%2B1%20902%20978%200009"
value="+19029780009"
target="_blank">+1
902 978 0009</a>><br>
<br>
<hosted-engine--deploy-logs.zip><br>
</blockquote>
<br>
<br>
Users mailing list<br>
<a moz-do-not-send="true"
href="mailto:Users@ovirt.org"
target="_blank">Users(a)ovirt.org</a><br>
<a moz-do-not-send="true"
href="http://lists.ovirt.org/mailman/listinfo/users"
target="_blank">http://lists.ovirt.org/mailman/listinfo/user...
<<a moz-do-not-send="true"
href="http://lists.ovirt.org/mailman/listinfo/users"
target="_blank">http://lists.ovirt.org/mailman/listinfo/user...
<br>
-- <br>
Wee<br>
</blockquote>
<br>
</blockquote>
<br>
_______________________________________________<br>
Users mailing list<br>
<a moz-do-not-send="true"
href="mailto:Users@ovirt.org"
target="_blank">Users(a)ovirt.org</a><br>
<a moz-do-not-send="true"
href="http://lists.ovirt.org/mailman/listinfo/users"
target="_blank">http://lists.ovirt.org/mailman/listinfo/user...
</blockquote>
<br>
</div>
</div>
</blockquote>
<br>
</div>
</div>
</div>
</blockquote>
</div>
<br>
</div>
</blockquote>
<br>
</body>
</html>
--------------030000020408000408030009--
6:08 p.m.
New subject: Adding another host to my cluster
On Fri, May 13, 2016 at 3:53 PM, Charles Tassell <ctassell(a)gmail.com> wrote:
Hi Gervais,
Okay, I see two problems: there are some leftover direcyories causing
issues and for some reason VDSM seems to be trying to bind to a port
something is already running on (probably an older version of VDSM.) Try
removing the duplicate dirs (rmdir
/var/run/vdsm/storage/248f46f0-d793-4581-9810-c9d965e2f286 and
/rhev/data-center/mnt - if they aren't empty don't rm -rf them because they
might be mounted from your production servers. Just mv -i them to /root or
somewhere.)
You should not touch directories under /run/vdsm/storage or /rhev/data-center,
they should not have any negative effect on the system.
Next shutdown the vdsm service with "service vdsm stop"
(I think, might be
service stop vdsm, I don't use CentOS much) and kill any running vdsm
processes (ps ax |grep vdsm) The error that I saw was:
MainThread::ERROR::2016-05-13 08:58:38,262::clientIF::128::vds::(__init__)
failed to init clientIF, shutting down storage dispatcher
MainThread::ERROR::2016-05-13 08:58:38,289::vdsm::171::vds::(run) Exception
raised
Traceback (most recent call last):
File "/usr/share/vdsm/vdsm", line 169, in run
serve_clients(log)
File "/usr/share/vdsm/vdsm", line 102, in serve_clients
cif = clientIF.getInstance(irs, log, scheduler)
File "/usr/share/vdsm/clientIF.py", line 193, in getInstance
cls._instance = clientIF(irs, log, scheduler)
File "/usr/share/vdsm/clientIF.py", line 123, in __init__
self._createAcceptor(host, port)
File "/usr/share/vdsm/clientIF.py", line 201, in _createAcceptor
port, sslctx)
File "/usr/share/vdsm/protocoldetector.py", line 170, in __init__
sock = _create_socket(host, port)
File "/usr/share/vdsm/protocoldetector.py", line 40, in _create_socket
server_socket.bind(addr[0][4])
File "/usr/lib64/python2.7/socket.py", line 224, in meth
return getattr(self._sock,name)(*args)
error: [Errno 98] Address already in use
Please open a bug - this should never happen.
https://bugzilla.redhat.com/enter_bug.cgi?product=vdsm
oVirt team: Infra
Severity: High
Vdsm must set the socket option socket.SO_REUSEADDR
before binding.
Ensuring that only one vdsm instance is running must be
done elsewhere if needed, for example using a lock file.
Nir
6:12 p.m.
New subject: Adding another host to my cluster
On Fri, May 13, 2016 at 3:37 PM, Gervais de Montbrun
<gervais(a)demontbrun.com> wrote:
Hi Charles,
I think the problem I am having is due to the setup failing and not
something in vdsm configs as I have never gotten this server to start up
properly and the BRIDGE ethernet interface + ovirt routes are not setup.
I put the logs here:
https://www.dropbox.com/sh/5ugyykqh1lgru9l/AACXxRYWr3tgd0WbBVFW5twHa?dl=0
hosted-engine--deploy-logs.zip # Logs from when I tried to deploy and it
failed
vdsm.tar.gz # /var/log/vdsm
Output from running vdsm from the command line:
[root@cultivar2 log]# su -s /bin/bash vdsm
This cannot work unless supervdsmd is running...
[vdsm@cultivar2 log]$ python /usr/share/vdsm/vdsm
(PID: 6521) I am the actual vdsm 4.17.26-1.el7
cultivar2.grove.silverorange.com (3.10.0-327.el7.x86_64)
VDSM will run with cpu affinity: frozenset([1])
/usr/bin/taskset --all-tasks --pid --cpu-list 1 6521 (cwd None)
SUCCESS: <err> = ''; <rc> = 0
Starting scheduler vdsm.Scheduler
started
Run and protect:
registerDomainStateChangeCallback(callbackFunc=<functools.partial object at
0x381b158>)
Run and protect: registerDomainStateChangeCallback, Return response: None
Trying to connect to Super Vdsm
Preparing MOM interface
Using named unix socket /var/run/vdsm/mom-vdsm.sock
Unregistering all secrests
trying to connect libvirt
recovery: started
Setting channels' timeout to 30 seconds.
Starting VM channels listener thread.
Listening at 0.0.0.0:54321
Adding detector <rpc.bindingxmlrpc.XmlDetector instance at 0x3b4ecb0>
recovery: completed in 0s
Adding detector <yajsonrpc.stompreactor.StompDetector instance at 0x382e5a8>
Starting executor
Starting worker jsonrpc.Executor/0
Worker started
Starting worker jsonrpc.Executor/1
Worker started
Starting worker jsonrpc.Executor/2
Worker started
Starting worker jsonrpc.Executor/3
Worker started
Starting worker jsonrpc.Executor/4
Worker started
Starting worker jsonrpc.Executor/5
Worker started
Starting worker jsonrpc.Executor/6
Worker started
Starting worker jsonrpc.Executor/7
Worker started
XMLRPC server running
Starting executor
Starting worker periodic/0
Worker started
Starting worker periodic/1
Worker started
Starting worker periodic/2
Worker started
Starting worker periodic/3
Worker started
trying to connect libvirt
Panic: Connect to supervdsm service failed: [Errno 2] No such file or
directory
Traceback (most recent call last):
File "/usr/share/vdsm/supervdsm.py", line 78, in _connect
utils.retry(self._manager.connect, Exception, timeout=60, tries=3)
File "/usr/lib/python2.7/site-packages/vdsm/utils.py", line 959, in retry
return func()
File "/usr/lib64/python2.7/multiprocessing/managers.py", line 500, in
connect
conn = Client(self._address, authkey=self._authkey)
File "/usr/lib64/python2.7/multiprocessing/connection.py", line 173, in
Client
c = SocketClient(address)
File "/usr/lib64/python2.7/multiprocessing/connection.py", line 308, in
SocketClient
s.connect(address)
File "/usr/lib64/python2.7/socket.py", line 224, in meth
return getattr(self._sock,name)(*args)
error: [Errno 2] No such file or directory
Vdsm tries to connect to supervdsmd on startup, and if it is not running
it will fail.
You can do:
systemctl start supervdsmd
And they you can run vdsmd from the shell.
But why do you need to run vdsm from the shell?
Nir
7:36 p.m.
New subject: Adding another host to my cluster
Hi Nir,
Thank you for you input.
It was suggest that I try starting vdsm from the shell so I could see the
output in an effort to solve my issue:
http://lists.ovirt.org/pipermail/users/2016-May/039690.html
Cheers,
Gervais
On May 13, 2016, at 12:12 PM, Nir Soffer <nsoffer(a)redhat.com> wrote:
On Fri, May 13, 2016 at 3:37 PM, Gervais de Montbrun
<gervais(a)demontbrun.com> wrote:
Hi Charles,
I think the problem I am having is due to the setup failing and not
something in vdsm configs as I have never gotten this server to start up
properly and the BRIDGE ethernet interface + ovirt routes are not setup.
I put the logs here:
https://www.dropbox.com/sh/5ugyykqh1lgru9l/AACXxRYWr3tgd0WbBVFW5twHa?dl=0
hosted-engine--deploy-logs.zip # Logs from when I tried to deploy and it
failed
vdsm.tar.gz # /var/log/vdsm
Output from running vdsm from the command line:
[root@cultivar2 log]# su -s /bin/bash vdsm
This cannot work unless supervdsmd is running...
[vdsm@cultivar2 log]$ python /usr/share/vdsm/vdsm
(PID: 6521) I am the actual vdsm 4.17.26-1.el7
cultivar2.grove.silverorange.com (3.10.0-327.el7.x86_64)
VDSM will run with cpu affinity: frozenset([1])
/usr/bin/taskset --all-tasks --pid --cpu-list 1 6521 (cwd None)
SUCCESS: <err> = ''; <rc> = 0
Starting scheduler vdsm.Scheduler
started
Run and protect:
registerDomainStateChangeCallback(callbackFunc=<functools.partial object at
0x381b158>)
Run and protect: registerDomainStateChangeCallback, Return response: None
Trying to connect to Super Vdsm
Preparing MOM interface
Using named unix socket /var/run/vdsm/mom-vdsm.sock
Unregistering all secrests
trying to connect libvirt
recovery: started
Setting channels' timeout to 30 seconds.
Starting VM channels listener thread.
Listening at 0.0.0.0:54321
Adding detector <rpc.bindingxmlrpc.XmlDetector instance at 0x3b4ecb0>
recovery: completed in 0s
Adding detector <yajsonrpc.stompreactor.StompDetector instance at 0x382e5a8>
Starting executor
Starting worker jsonrpc.Executor/0
Worker started
Starting worker jsonrpc.Executor/1
Worker started
Starting worker jsonrpc.Executor/2
Worker started
Starting worker jsonrpc.Executor/3
Worker started
Starting worker jsonrpc.Executor/4
Worker started
Starting worker jsonrpc.Executor/5
Worker started
Starting worker jsonrpc.Executor/6
Worker started
Starting worker jsonrpc.Executor/7
Worker started
XMLRPC server running
Starting executor
Starting worker periodic/0
Worker started
Starting worker periodic/1
Worker started
Starting worker periodic/2
Worker started
Starting worker periodic/3
Worker started
trying to connect libvirt
Panic: Connect to supervdsm service failed: [Errno 2] No such file or
directory
Traceback (most recent call last):
File "/usr/share/vdsm/supervdsm.py", line 78, in _connect
utils.retry(self._manager.connect, Exception, timeout=60, tries=3)
File "/usr/lib/python2.7/site-packages/vdsm/utils.py", line 959, in retry
return func()
File "/usr/lib64/python2.7/multiprocessing/managers.py", line 500, in
connect
conn = Client(self._address, authkey=self._authkey)
File "/usr/lib64/python2.7/multiprocessing/connection.py", line 173, in
Client
c = SocketClient(address)
File "/usr/lib64/python2.7/multiprocessing/connection.py", line 308, in
SocketClient
s.connect(address)
File "/usr/lib64/python2.7/socket.py", line 224, in meth
return getattr(self._sock,name)(*args)
error: [Errno 2] No such file or directory
Vdsm tries to connect to supervdsmd on startup, and if it is not running
it will fail.
You can do:
systemctl start supervdsmd
And they you can run vdsmd from the shell.
But why do you need to run vdsm from the shell?
Nir
1:32 a.m.
New subject: Adding another host to my cluster
--Apple-Mail=_B4BC9680-8BD9-4CBD-BC07-D9AE3227F522
Content-Transfer-Encoding: quoted-printable
Content-Type: text/plain;
charset=us-ascii
Hey Folks,
I'm still stuck here... I believe the issue may be because the Enrolling =
certificates stage is failing...
Any idea's how to sort this out?
I see:
Installing Host Cultivar2. Enrolling certificate
Failed to install Host Cultivar2. Certificate enrollment failed.
Host Cultivar2 installation failed. Certificate enrollement =
failed.
Any attempt to re-install fails at this step.
Cheers,
Gervais
On May 13, 2016, at 1:36 PM, Gervais de Montbrun =
<gervais(a)demontbrun.com> wrote:
=20
Hi Nir,
=20
Thank you for you input.
=20
It was suggest that I try starting vdsm from the shell so I could see =
the output
in an effort to solve my issue: =
http://lists.ovirt.org/pipermail/users/2016-May/039690.html =
<http://lists.ovirt.org/pipermail/users/2016-May/039690.html>
=20
Cheers,
Gervais
=20
=20
=20
> On May 13, 2016, at 12:12 PM, Nir Soffer <nsoffer(a)redhat.com =
<mailto:nsoffer@redhat.com>> wrote:
>=20
> On Fri, May 13, 2016 at 3:37 PM, Gervais de Montbrun
> <gervais(a)demontbrun.com <mailto:gervais@demontbrun.com>> wrote:
>> Hi Charles,
>>=20
>> I think the problem I am having is due to the setup failing and not
>> something in vdsm configs as I have never gotten this server to =
start up
>> properly and the BRIDGE ethernet interface + ovirt routes are
not =
setup.
>>=20
>> I put the logs here:
>> =
https://www.dropbox.com/sh/5ugyykqh1lgru9l/AACXxRYWr3tgd0WbBVFW5twHa?dl=3D=
0 =
<https://www.dropbox.com/sh/5ugyykqh1lgru9l/AACXxRYWr3tgd0WbBVFW5twHa?dl=3D=
0>
>>=20
>> hosted-engine--deploy-logs.zip # Logs from when I tried to deploy =
and it
>> failed
>> vdsm.tar.gz # /var/log/vdsm
>>=20
>> Output from running vdsm from the command line:
>>=20
>> [root@cultivar2 log]# su -s /bin/bash vdsm
>=20
> This cannot work unless supervdsmd is running...
>=20
>> [vdsm@cultivar2 log]$ python /usr/share/vdsm/vdsm
>> (PID: 6521) I am the actual vdsm 4.17.26-1.el7
>> cultivar2.grove.silverorange.com =
<http://cultivar2.grove.silverorange.com/> (3.10.0-327.el7.x86_64)
>> VDSM will run with cpu affinity: frozenset([1])
>> /usr/bin/taskset --all-tasks --pid --cpu-list 1 6521 (cwd None)
>> SUCCESS: <err> =3D ''; <rc> =3D 0
>> Starting scheduler vdsm.Scheduler
>> started
>> Run and protect:
>> registerDomainStateChangeCallback(callbackFunc=3D<functools.partial =
object at
>> 0x381b158>)
>> Run and protect: registerDomainStateChangeCallback, Return response: =
None
>> Trying to connect to Super Vdsm
>> Preparing MOM interface
>> Using named unix socket /var/run/vdsm/mom-vdsm.sock
>> Unregistering all secrests
>> trying to connect libvirt
>> recovery: started
>> Setting channels' timeout to 30 seconds.
>> Starting VM channels listener thread.
>> Listening at 0.0.0.0:54321 <http://0.0.0.0:54321/>
>> Adding detector <rpc.bindingxmlrpc.XmlDetector instance at =
0x3b4ecb0>
>> recovery: completed in 0s
>> Adding detector <yajsonrpc.stompreactor.StompDetector instance at =
0x382e5a8>
>> Starting executor
>> Starting worker jsonrpc.Executor/0
>> Worker started
>> Starting worker jsonrpc.Executor/1
>> Worker started
>> Starting worker jsonrpc.Executor/2
>> Worker started
>> Starting worker jsonrpc.Executor/3
>> Worker started
>> Starting worker jsonrpc.Executor/4
>> Worker started
>> Starting worker jsonrpc.Executor/5
>> Worker started
>> Starting worker jsonrpc.Executor/6
>> Worker started
>> Starting worker jsonrpc.Executor/7
>> Worker started
>> XMLRPC server running
>> Starting executor
>> Starting worker periodic/0
>> Worker started
>> Starting worker periodic/1
>> Worker started
>> Starting worker periodic/2
>> Worker started
>> Starting worker periodic/3
>> Worker started
>> trying to connect libvirt
>> Panic: Connect to supervdsm service failed: [Errno 2] No such file =
or
>> directory
>> Traceback (most recent call last):
>> File "/usr/share/vdsm/supervdsm.py", line 78, in _connect
>> utils.retry(self._manager.connect, Exception, timeout=3D60, =
tries=3D3)
>> File
"/usr/lib/python2.7/site-packages/vdsm/utils.py", line 959, in =
retry
>> return func()
>> File "/usr/lib64/python2.7/multiprocessing/managers.py", line 500, =
in
>> connect
>> conn =3D Client(self._address, authkey=3Dself._authkey)
>> File "/usr/lib64/python2.7/multiprocessing/connection.py", line 173, =
in
>> Client
>> c =3D SocketClient(address)
>> File "/usr/lib64/python2.7/multiprocessing/connection.py", line 308, =
in
>> SocketClient
>> s.connect(address)
>> File "/usr/lib64/python2.7/socket.py", line 224, in meth
>> return getattr(self._sock,name)(*args)
>> error: [Errno 2] No such file or directory
>=20
> Vdsm tries to connect to supervdsmd on startup, and if it is not =
running
> it will fail.
>=20
> You can do:
>=20
> systemctl start supervdsmd
>=20
> And they you can run vdsmd from the shell.
>=20
> But why do you need to run vdsm from the shell?
>=20
> Nir
=20
--Apple-Mail=_B4BC9680-8BD9-4CBD-BC07-D9AE3227F522
Content-Transfer-Encoding: quoted-printable
Content-Type: text/html;
charset=us-ascii
<html><head><meta http-equiv=3D"Content-Type"
content=3D"text/html =
charset=3Dus-ascii"></head><body style=3D"word-wrap: break-word; =
-webkit-nbsp-mode: space; -webkit-line-break: after-white-space;" =
class=3D"">Hey Folks,<div class=3D""><br
class=3D""></div><div =
class=3D"">I'm still stuck here... I believe the issue may be because =
the Enrolling certificates stage is failing...</div><div
class=3D""><br =
class=3D""></div><div class=3D"">Any idea's how to
sort this =
out?</div><div class=3D""><br
class=3D""></div><div class=3D"">I =
see:</div><div class=3D""><span
class=3D"Apple-tab-span" =
style=3D"white-space:pre"> </span>Installing Host Cultivar2. =
Enrolling certificate</div><div class=3D""><span
class=3D"Apple-tab-span" =
style=3D"white-space:pre"> </span>Failed to install Host Cultivar2. =
Certificate enrollment failed.</div><div class=3D""><span =
class=3D"Apple-tab-span"
style=3D"white-space:pre"> </span>Host =
Cultivar2 installation failed. Certificate enrollement failed.</div><div =
class=3D""><br class=3D""></div><div
class=3D"">Any attempt to =
re-install fails at this step.</div><div class=3D""><div
class=3D"">
<div id=3D"signature" class=3D""><br
class=3D"">Cheers,<br =
class=3D"">Gervais<br class=3D""><br
class=3D""><br class=3D""></div>
</div>
<br class=3D""><div><blockquote type=3D"cite"
class=3D""><div =
class=3D"">On May 13, 2016, at 1:36 PM, Gervais de Montbrun <<a =
href=3D"mailto:gervais@demontbrun.com" =
class=3D"">gervais(a)demontbrun.com</a>&gt; wrote:</div><br
=
class=3D"Apple-interchange-newline"><div class=3D""><div
dir=3D"ltr" =
class=3D""><div dir=3D"auto"
style=3D"word-wrap:break-word" class=3D"">Hi =
Nir,<br class=3D""><br class=3D"">Thank you for you
input.<br =
class=3D""><br class=3D"">It was suggest that I try starting
vdsm from =
the shell so I could see the output in an effort to solve my issue: <a =
href=3D"http://lists.ovirt.org/pipermail/users/2016-May/039690.html&... =
target=3D"_blank" =
class=3D"">http://lists.ovirt.org/pipermail/users/2016-May/0...
<br class=3D""><br class=3D"">Cheers,<br
class=3D"">Gervais<br =
class=3D""><br class=3D""><br
class=3D""><br class=3D""><blockquote =
type=3D"cite" class=3D"">On May 13, 2016, at 12:12 PM, Nir Soffer
<<a =
href=3D"mailto:nsoffer@redhat.com" target=3D"_blank" =
class=3D"">nsoffer(a)redhat.com</a>&gt; wrote:<br
class=3D""><br =
class=3D"">On Fri, May 13, 2016 at 3:37 PM, Gervais de Montbrun<br =
class=3D""><<a href=3D"mailto:gervais@demontbrun.com"
target=3D"_blank"=
class=3D"">gervais(a)demontbrun.com</a>&gt; wrote:<br =
class=3D""><blockquote type=3D"cite" class=3D"">Hi
Charles,<br =
class=3D""><br class=3D"">I think the problem I am having is
due to the =
setup failing and not<br class=3D"">something in vdsm configs as I have =
never gotten this server to start up<br class=3D"">properly and the =
BRIDGE ethernet interface + ovirt routes are not setup.<br
class=3D""><br =
class=3D"">I put the logs here:<br class=3D""><a =
href=3D"https://www.dropbox.com/sh/5ugyykqh1lgru9l/AACXxRYWr3tgd0WbB...
Ha?dl=3D0" target=3D"_blank" =
class=3D"">https://www.dropbox.com/sh/5ugyykqh1lgru9l/AACXxR...
5twHa?dl=3D0</a><br class=3D""><br =
class=3D"">hosted-engine--deploy-logs.zip # Logs from when I tried to =
deploy and it<br class=3D"">failed<br
class=3D"">vdsm.tar.gz # =
/var/log/vdsm<br class=3D""><br class=3D"">Output from
running vdsm from =
the command line:<br class=3D""><br
class=3D"">[root@cultivar2 log]# su =
-s /bin/bash vdsm<br class=3D""></blockquote><br
class=3D"">This cannot =
work unless supervdsmd is running...<br class=3D""><br =
class=3D""><blockquote type=3D"cite"
class=3D"">[vdsm@cultivar2 log]$ =
python /usr/share/vdsm/vdsm<br class=3D"">(PID: 6521) I am the actual =
vdsm 4.17.26-1.el7<br class=3D""><a =
href=3D"http://cultivar2.grove.silverorange.com/" target=3D"_blank" =
class=3D"">cultivar2.grove.silverorange.com</a> =
(3.10.0-327.el7.x86_64)<br class=3D"">VDSM will run with cpu affinity: =
frozenset([1])<br class=3D"">/usr/bin/taskset --all-tasks --pid =
--cpu-list 1 6521 (cwd None)<br class=3D"">SUCCESS: <err>
=3D ''; =
<rc> =3D 0<br class=3D"">Starting scheduler
vdsm.Scheduler<br =
class=3D"">started<br class=3D"">Run and protect:<br =
class=3D"">registerDomainStateChangeCallback(callbackFunc=3D<functools.=
partial object at<br class=3D"">0x381b158>)<br
class=3D"">Run and =
protect: registerDomainStateChangeCallback, Return response: None<br =
class=3D"">Trying to connect to Super Vdsm<br
class=3D"">Preparing MOM =
interface<br class=3D"">Using named unix socket =
/var/run/vdsm/mom-vdsm.sock<br class=3D"">Unregistering all secrests<br
=
class=3D"">trying to connect libvirt<br class=3D"">recovery:
started<br =
class=3D"">Setting channels' timeout to 30 seconds.<br
class=3D"">Starting=
VM channels listener thread.<br class=3D"">Listening at <a =
href=3D"http://0.0.0.0:54321/" target=3D"_blank" =
class=3D"">0.0.0.0:54321</a><br class=3D"">Adding
detector =
<rpc.bindingxmlrpc.XmlDetector instance at 0x3b4ecb0><br =
class=3D"">recovery: completed in 0s<br class=3D"">Adding
detector =
<yajsonrpc.stompreactor.StompDetector instance at 0x382e5a8><br =
class=3D"">Starting executor<br class=3D"">Starting worker =
jsonrpc.Executor/0<br class=3D"">Worker started<br
class=3D"">Starting =
worker jsonrpc.Executor/1<br class=3D"">Worker started<br =
class=3D"">Starting worker jsonrpc.Executor/2<br
class=3D"">Worker =
started<br class=3D"">Starting worker jsonrpc.Executor/3<br =
class=3D"">Worker started<br class=3D"">Starting worker =
jsonrpc.Executor/4<br class=3D"">Worker started<br
class=3D"">Starting =
worker jsonrpc.Executor/5<br class=3D"">Worker started<br =
class=3D"">Starting worker jsonrpc.Executor/6<br
class=3D"">Worker =
started<br class=3D"">Starting worker jsonrpc.Executor/7<br =
class=3D"">Worker started<br class=3D"">XMLRPC server
running<br =
class=3D"">Starting executor<br class=3D"">Starting worker
periodic/0<br =
class=3D"">Worker started<br class=3D"">Starting worker
periodic/1<br =
class=3D"">Worker started<br class=3D"">Starting worker
periodic/2<br =
class=3D"">Worker started<br class=3D"">Starting worker
periodic/3<br =
class=3D"">Worker started<br class=3D"">trying to connect
libvirt<br =
class=3D"">Panic: Connect to supervdsm service failed: [Errno 2] No such =
file or<br class=3D"">directory<br class=3D"">Traceback
(most recent =
call last):<br class=3D"">File "/usr/share/vdsm/supervdsm.py",
line 78, =
in _connect<br class=3D""> utils.retry(self._manager.connect, =
Exception, timeout=3D60, tries=3D3)<br class=3D"">File =
"/usr/lib/python2.7/site-packages/vdsm/utils.py", line 959, in retry<br =
class=3D""> return func()<br class=3D"">File =
"/usr/lib64/python2.7/multiprocessing/managers.py", line 500, in<br =
class=3D"">connect<br class=3D""> conn =3D
Client(self._address, =
authkey=3Dself._authkey)<br class=3D"">File =
"/usr/lib64/python2.7/multiprocessing/connection.py", line 173, in<br =
class=3D"">Client<br class=3D""> c =3D
SocketClient(address)<br =
class=3D"">File
"/usr/lib64/python2.7/multiprocessing/connection.py", =
line 308, in<br class=3D"">SocketClient<br class=3D""> =
s.connect(address)<br class=3D"">File =
"/usr/lib64/python2.7/socket.py", line 224, in meth<br
class=3D""> =
return getattr(self._sock,name)(*args)<br class=3D"">error:
[Errno =
2] No such file or directory<br class=3D""></blockquote><br =
class=3D"">Vdsm tries to connect to supervdsmd on startup, and if it is =
not running<br class=3D"">it will fail.<br
class=3D""><br class=3D"">You =
can do:<br class=3D""><br class=3D"">systemctl start
supervdsmd<br =
class=3D""><br class=3D"">And they you can run vdsmd from the
shell.<br =
class=3D""><br class=3D"">But why do you need to run vdsm
from the =
shell?<br class=3D""><br class=3D"">Nir<br
class=3D""></blockquote><br =
class=3D""></div></div>
</div></blockquote></div><br
class=3D""></div></body></html>=
--Apple-Mail=_B4BC9680-8BD9-4CBD-BC07-D9AE3227F522--
11:10 p.m.
New subject: Adding another host to my cluster
On Sun, May 15, 2016 at 1:32 AM, Gervais de Montbrun <gervais(a)demontbrun.com
wrote:
Hey Folks,
I'm still stuck here... I believe the issue may be because the Enrolling
certificates stage is failing...
Any idea's how to sort this out?
I see:
Installing Host Cultivar2. Enrolling certificate
Failed to install Host Cultivar2. Certificate enrollment failed.
Host Cultivar2 installation failed. Certificate enrollement failed.
Any attempt to re-install fails at this step.
Cheers,
Gervais
I also see in the logs that the manager (ovirt-engine) rejected the host
addition to the setup. Please add the /var/log/ovirt-engine/engine.log from
the engine machine. Also, the engine machine has the install log - open one
of the Event logs in the UI that says you host installation failed and you
will see it retrieved the install log to a path under your engine. Please
include this as well.
>
> On May 13, 2016, at 1:36 PM, Gervais de Montbrun <gervais(a)demontbrun.com>
wrote:
>
> Hi Nir,
>
> Thank you for you input.
>
> It was suggest that I try starting vdsm from the shell so I could see the
> output in an effort to solve my issue:
> http://lists.ovirt.org/pipermail/users/2016-May/039690.html
>
> Cheers,
> Gervais
>
>
>
> On May 13, 2016, at 12:12 PM, Nir Soffer <nsoffer(a)redhat.com wrote:
>
> On Fri, May 13, 2016 at 3:37 PM, Gervais de Montbrun
> <gervais(a)demontbrun.com wrote:
>
> Hi Charles,
>
> I think the problem I am having is due to the setup failing and not
> something in vdsm configs as I have never gotten this server to start up
> properly and the BRIDGE ethernet interface + ovirt routes are not setup.
>
> I put the logs here:
> https://www.dropbox.com/sh/5ugyykqh1lgru9l/AACXxRYWr3tgd0WbBVFW5twHa?dl=0
>
> hosted-engine--deploy-logs.zip # Logs from when I tried to deploy and it
> failed
> vdsm.tar.gz # /var/log/vdsm
>
> Output from running vdsm from the command line:
>
> [root@cultivar2 log]# su -s /bin/bash vdsm
>
>
> This cannot work unless supervdsmd is running...
>
> [vdsm@cultivar2 log]$ python /usr/share/vdsm/vdsm
> (PID: 6521) I am the actual vdsm 4.17.26-1.el7
> cultivar2.grove.silverorange.com (3.10.0-327.el7.x86_64)
> VDSM will run with cpu affinity: frozenset([1])
> /usr/bin/taskset --all-tasks --pid --cpu-list 1 6521 (cwd None)
> SUCCESS: <err> = ''; <rc> = 0
> Starting scheduler vdsm.Scheduler
> started
> Run and protect:
> registerDomainStateChangeCallback(callbackFunc=<functools.partial object at
> 0x381b158>)
> Run and protect: registerDomainStateChangeCallback, Return response: None
> Trying to connect to Super Vdsm
> Preparing MOM interface
> Using named unix socket /var/run/vdsm/mom-vdsm.sock
> Unregistering all secrests
> trying to connect libvirt
> recovery: started
> Setting channels' timeout to 30 seconds.
> Starting VM channels listener thread.
> Listening at 0.0.0.0:54321
> Adding detector <rpc.bindingxmlrpc.XmlDetector instance at 0x3b4ecb0>
> recovery: completed in 0s
> Adding detector <yajsonrpc.stompreactor.StompDetector instance at
> 0x382e5a8>
> Starting executor
> Starting worker jsonrpc.Executor/0
> Worker started
> Starting worker jsonrpc.Executor/1
> Worker started
> Starting worker jsonrpc.Executor/2
> Worker started
> Starting worker jsonrpc.Executor/3
> Worker started
> Starting worker jsonrpc.Executor/4
> Worker started
> Starting worker jsonrpc.Executor/5
> Worker started
> Starting worker jsonrpc.Executor/6
> Worker started
> Starting worker jsonrpc.Executor/7
> Worker started
> XMLRPC server running
> Starting executor
> Starting worker periodic/0
> Worker started
> Starting worker periodic/1
> Worker started
> Starting worker periodic/2
> Worker started
> Starting worker periodic/3
> Worker started
> trying to connect libvirt
> Panic: Connect to supervdsm service failed: [Errno 2] No such file or
> directory
> Traceback (most recent call last):
> File "/usr/share/vdsm/supervdsm.py", line 78, in _connect
> utils.retry(self._manager.connect, Exception, timeout=60, tries=3)
> File "/usr/lib/python2.7/site-packages/vdsm/utils.py", line 959, in retry
> return func()
> File "/usr/lib64/python2.7/multiprocessing/managers.py", line 500, in
> connect
> conn = Client(self._address, authkey=self._authkey)
> File "/usr/lib64/python2.7/multiprocessing/connection.py", line 173, in
> Client
> c = SocketClient(address)
> File "/usr/lib64/python2.7/multiprocessing/connection.py", line 308, in
> SocketClient
> s.connect(address)
> File "/usr/lib64/python2.7/socket.py", line 224, in meth
> return getattr(self._sock,name)(*args)
> error: [Errno 2] No such file or directory
>
>
> Vdsm tries to connect to supervdsmd on startup, and if it is not running
> it will fail.
>
> You can do:
>
> systemctl start supervdsmd
>
> And they you can run vdsmd from the shell.
>
> But why do you need to run vdsm from the shell?
>
> Nir
>
>
>
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>
8:04 p.m.
New subject: Adding another host to my cluster
--Apple-Mail=_C96C4A69-29F4-48A1-BD73-0F39D0714F1E
Content-Transfer-Encoding: quoted-printable
Content-Type: text/plain;
charset=us-ascii
Hi Roy,
I've added /var/log/ovirt-engine/engine.log to my DropBox: =
https://www.dropbox.com/sh/21lkl6ao3hv2r85/AADDMCK4Dp7UYgs5P6dMQxHKa/vdsm?=
dl=3D0 =
<https://www.dropbox.com/sh/21lkl6ao3hv2r85/AADDMCK4Dp7UYgs5P6dMQxHKa/vdsm=
?dl=3D0>
When I look in the engine.log, I see the error "unable to load number =
from serial.txt"
I did a find for serial.txt and the only file that comes up is: =
/etc/pki/ovirt-engine/serial.txt=20
(Makes sense that this is the file it wants to read)
When I open /etc/pki/ovirt-engine/serial.txt, it is an empty file.=20
[root@cultivar ovirt-engine]# cat =
/etc/pki/ovirt-engine/serial.txt
[root@cultivar ovirt-engine]#=20
What should be in serial.txt?
I don't understand where to find the other log that you mention in your =
email below. I don't see any paths listed in the UI when I click on the =
failed event for certificate enrollment.
Cheers,
Gervais
On May 15, 2016, at 5:10 PM, Roy Golan <rgolan(a)redhat.com =
<mailto:rgolan@redhat.com>> wrote:
=20
=20
=20
On Sun, May 15, 2016 at 1:32 AM, Gervais de Montbrun =
<gervais(a)demontbrun.com
<mailto:gervais@demontbrun.com>> wrote:
Hey Folks,
=20
I'm still stuck here... I believe the issue may be because the =
Enrolling
certificates stage is failing...
=20
Any idea's how to sort this out?
=20
I see:
Installing Host Cultivar2. Enrolling certificate
Failed to install Host Cultivar2. Certificate enrollment failed.
Host Cultivar2 installation failed. Certificate enrollement =
failed.
=20
Any attempt to re-install fails at this step.
=20
Cheers,
Gervais
=20
=20
=20
I also see in the logs that the manager (ovirt-engine) rejected the =
host addition
to the setup. Please add the =
/var/log/ovirt-engine/engine.log from the engine machine. Also, the =
engine machine has the install log - open one of the Event logs in the =
UI that says you host installation failed and you will see it retrieved =
the install log to a path under your engine. Please include this as =
well.
=20
=20
> On May 13, 2016, at 1:36 PM, Gervais de Montbrun =
<gervais(a)demontbrun.com
<mailto:gervais@demontbrun.com>> wrote:
>=20
> Hi Nir,
>=20
> Thank you for you input.
>=20
> It was suggest that I try starting vdsm from the shell so I could see =
the
output in an effort to solve my issue: =
http://lists.ovirt.org/pipermail/users/2016-May/039690.html =
<http://lists.ovirt.org/pipermail/users/2016-May/039690.html>
>=20
> Cheers,
> Gervais
<mailto:nsoffer@redhat.com>> wrote:
=20
=20
>=20
>> On May 13, 2016, at 12:12 PM, Nir Soffer <nsoffer(a)redhat.com =
>>=20
>> On Fri, May 13, 2016 at 3:37 PM, Gervais de Montbrun
>> <gervais(a)demontbrun.com <mailto:gervais@demontbrun.com>> wrote:
>>> Hi Charles,
>>>=20
>>> I think the problem I am having is due to the setup failing and not
>>> something in vdsm configs as I have never gotten this server to =
start
up
>>> properly and the BRIDGE ethernet interface + ovirt routes
are not =
setup.
>>>=20
>>> I put the logs here:
>>> =
https://www.dropbox.com/sh/5ugyykqh1lgru9l/AACXxRYWr3tgd0WbBVFW5twHa?dl=3D=
0 =
<https://www.dropbox.com/sh/5ugyykqh1lgru9l/AACXxRYWr3tgd0WbBVFW5twHa?dl=3D=
0>
>>>=20
>>> hosted-engine--deploy-logs.zip # Logs from when I tried to deploy =
and
it
>>> failed
>>> vdsm.tar.gz # /var/log/vdsm
>>>=20
>>> Output from running vdsm from the command line:
>>>=20
>>> [root@cultivar2 log]# su -s /bin/bash vdsm
>>=20
>> This cannot work unless supervdsmd is running...
>>=20
>>> [vdsm@cultivar2 log]$ python /usr/share/vdsm/vdsm
>>> (PID: 6521) I am the actual vdsm 4.17.26-1.el7
>>> cultivar2.grove.silverorange.com =
<http://cultivar2.grove.silverorange.com/> (3.10.0-327.el7.x86_64)
>>> VDSM will run with cpu affinity: frozenset([1])
>>> /usr/bin/taskset --all-tasks --pid --cpu-list 1 6521 (cwd None)
>>> SUCCESS: <err> =3D ''; <rc> =3D 0
>>> Starting scheduler vdsm.Scheduler
>>> started
>>> Run and protect:
>>> registerDomainStateChangeCallback(callbackFunc=3D<functools.partial =
object at
>>> 0x381b158>)
>>> Run and protect: registerDomainStateChangeCallback, Return =
response:
None
>>> Trying to connect to Super Vdsm
>>> Preparing MOM interface
>>> Using named unix socket /var/run/vdsm/mom-vdsm.sock
>>> Unregistering all secrests
>>> trying to connect libvirt
>>> recovery: started
>>> Setting channels' timeout to 30 seconds.
>>> Starting VM channels listener thread.
>>> Listening at 0.0.0.0:54321 <http://0.0.0.0:54321/>
>>> Adding detector <rpc.bindingxmlrpc.XmlDetector instance at =
0x3b4ecb0>
>>> recovery: completed in 0s
>>> Adding detector <yajsonrpc.stompreactor.StompDetector instance at =
0x382e5a8>
>>> Starting executor
>>> Starting worker jsonrpc.Executor/0
>>> Worker started
>>> Starting worker jsonrpc.Executor/1
>>> Worker started
>>> Starting worker jsonrpc.Executor/2
>>> Worker started
>>> Starting worker jsonrpc.Executor/3
>>> Worker started
>>> Starting worker jsonrpc.Executor/4
>>> Worker started
>>> Starting worker jsonrpc.Executor/5
>>> Worker started
>>> Starting worker jsonrpc.Executor/6
>>> Worker started
>>> Starting worker jsonrpc.Executor/7
>>> Worker started
>>> XMLRPC server running
>>> Starting executor
>>> Starting worker periodic/0
>>> Worker started
>>> Starting worker periodic/1
>>> Worker started
>>> Starting worker periodic/2
>>> Worker started
>>> Starting worker periodic/3
>>> Worker started
>>> trying to connect libvirt
>>> Panic: Connect to supervdsm service failed: [Errno 2] No such file =
or
>>> directory
>>> Traceback (most recent call last):
>>> File "/usr/share/vdsm/supervdsm.py", line 78, in _connect
>>> utils.retry(self._manager.connect, Exception, timeout=3D60, =
tries=3D3)
>>> File
"/usr/lib/python2.7/site-packages/vdsm/utils.py", line 959, in =
retry
>>> return func()
>>> File "/usr/lib64/python2.7/multiprocessing/managers.py", line 500,
=
in
>>> connect
>>> conn =3D Client(self._address, authkey=3Dself._authkey)
>>> File "/usr/lib64/python2.7/multiprocessing/connection.py", line =
173, in
>>> Client
>>> c =3D SocketClient(address)
>>> File "/usr/lib64/python2.7/multiprocessing/connection.py", line =
308, in
>>> SocketClient
>>> s.connect(address)
>>> File "/usr/lib64/python2.7/socket.py", line 224, in meth
>>> return getattr(self._sock,name)(*args)
>>> error: [Errno 2] No such file or directory
>>=20
>> Vdsm tries to connect to supervdsmd on startup, and if it is not =
running
>> it will fail.
>>=20
>> You can do:
>>=20
>> systemctl start supervdsmd
>>=20
>> And they you can run vdsmd from the shell.
>>=20
>> But why do you need to run vdsm from the shell?
>>=20
>> Nir
>=20
=20
=20
_______________________________________________
Users mailing list
Users(a)ovirt.org <mailto:Users@ovirt.org>
http://lists.ovirt.org/mailman/listinfo/users =
<http://lists.ovirt.org/mailman/listinfo/users>
=20
=20
--Apple-Mail=_C96C4A69-29F4-48A1-BD73-0F39D0714F1E
Content-Transfer-Encoding: quoted-printable
Content-Type: text/html;
charset=us-ascii
<html><head><meta http-equiv=3D"Content-Type"
content=3D"text/html =
charset=3Dus-ascii"><meta http-equiv=3D"Content-Type"
content=3D"text/html=
charset=3Dus-ascii"><meta http-equiv=3D"Content-Type" =
content=3D"text/html charset=3Dus-ascii"></head><body
style=3D"word-wrap: =
break-word; -webkit-nbsp-mode: space; -webkit-line-break: =
after-white-space;" class=3D"">Hi Roy,<div
class=3D""><br =
class=3D""></div><div class=3D"">I've =
added /var/log/ovirt-engine/engine.log to my DropBox: <a =
href=3D"https://www.dropbox.com/sh/21lkl6ao3hv2r85/AADDMCK4Dp7UYgs5P...
Ka/vdsm?dl=3D0" =
class=3D"">https://www.dropbox.com/sh/21lkl6ao3hv2r85/AADDMC...
QxHKa/vdsm?dl=3D0</a></div><div class=3D""><br
class=3D""></div><div =
class=3D"">When I look in the engine.log, I see the error "unable to =
load number from serial.txt"</div><div class=3D"">I did a find
for =
serial.txt and the only file that comes up =
is: /etc/pki/ovirt-engine/serial.txt </div><div =
class=3D"">(Makes sense that this is the file it wants to =
read)</div><div class=3D"">When I =
open /etc/pki/ovirt-engine/serial.txt, it is an empty =
file. </div><div class=3D""><span
class=3D"Apple-tab-span" =
style=3D"white-space:pre"> =
</span>[root@cultivar ovirt-engine]# cat =
/etc/pki/ovirt-engine/serial.txt</div><span class=3D"Apple-tab-span" =
style=3D"white-space:pre"> =
</span>[root@cultivar ovirt-engine]# <div
class=3D""><br =
class=3D""></div><div class=3D"">What should be in
serial.txt?</div><div =
class=3D""><br class=3D""></div><div
class=3D"">I don't understand where =
to find the other log that you mention in your email below. I don't see =
any paths listed in the UI when I click on the failed event for =
certificate enrollment.<br class=3D""><div class=3D"">
<div id=3D"signature" class=3D""><br
class=3D"">Cheers,<br =
class=3D"">Gervais<br class=3D""><br
class=3D""><br class=3D""></div>
</div>
<br class=3D""><div class=3D""><blockquote
type=3D"cite" class=3D""><div =
class=3D"">On May 15, 2016, at 5:10 PM, Roy Golan <<a =
href=3D"mailto:rgolan@redhat.com"
class=3D"">rgolan(a)redhat.com</a>&gt; =
wrote:</div><br class=3D"Apple-interchange-newline"><div
class=3D""><div =
dir=3D"ltr" class=3D""><br class=3D""><div
class=3D"gmail_extra"><br =
class=3D""><div class=3D"gmail_quote">On Sun, May 15, 2016 at
1:32 AM, =
Gervais de Montbrun <span dir=3D"ltr" class=3D""><<a
=
href=3D"mailto:gervais@demontbrun.com" target=3D"_blank" =
class=3D"">gervais(a)demontbrun.com</a>&gt;</span> wrote:<br
=
class=3D""><blockquote class=3D"gmail_quote"
style=3D"margin:0 0 0 =
.8ex;border-left:1px #ccc solid;padding-left:1ex"><div =
style=3D"word-wrap:break-word" class=3D"">Hey Folks,<div
class=3D""><br =
class=3D""></div><div class=3D"">I'm still stuck
here... I believe the =
issue may be because the Enrolling certificates stage is =
failing...</div><div class=3D""><br
class=3D""></div><div class=3D"">Any =
idea's how to sort this out?</div><div class=3D""><br =
class=3D""></div><div class=3D"">I
see:</div><div class=3D""><span =
style=3D"white-space:pre-wrap" class=3D""> </span>Installing
Host =
Cultivar2. Enrolling certificate</div><div class=3D""><span =
style=3D"white-space:pre-wrap" class=3D""> </span>Failed to
install =
Host Cultivar2. Certificate enrollment failed.</div><div
class=3D""><span =
style=3D"white-space:pre-wrap" class=3D""> </span>Host
Cultivar2 =
installation failed. Certificate enrollement failed.</div><div =
class=3D""><br class=3D""></div><div
class=3D"">Any attempt to =
re-install fails at this step.</div><div class=3D""><div
class=3D"">
<div class=3D""><br class=3D"">Cheers,<br
class=3D"">Gervais<br =
class=3D""><br class=3D""><br =
class=3D""></div></div></div></div></blockquote><div
class=3D""><br =
class=3D""></div><div class=3D"">I also see in the logs
that the manager =
(ovirt-engine) rejected the host addition to the setup. Please add the =
/var/log/ovirt-engine/engine.log from the engine machine. Also, the =
engine machine has the install log - open one of the Event logs in the =
UI that says you host installation failed and you will see it retrieved =
the install log to a path under your engine. Please include this as =
well.</div><div class=3D""> </div><blockquote
class=3D"gmail_quote" =
style=3D"margin:0 0 0 .8ex;border-left:1px #ccc =
solid;padding-left:1ex"><div style=3D"word-wrap:break-word" =
class=3D""><div class=3D""><div
class=3D""><div class=3D""></div>
</div><div class=3D""><div class=3D"h5">
<br class=3D""><div class=3D""><blockquote
type=3D"cite" class=3D""><div =
class=3D"">On May 13, 2016, at 1:36 PM, Gervais de Montbrun <<a =
href=3D"mailto:gervais@demontbrun.com" target=3D"_blank" =
class=3D"">gervais(a)demontbrun.com</a>&gt; wrote:</div><br
class=3D""><div =
class=3D""><div dir=3D"ltr" class=3D""><div
dir=3D"auto" =
style=3D"word-wrap:break-word" class=3D"">Hi Nir,<br
class=3D""><br =
class=3D"">Thank you for you input.<br class=3D""><br
class=3D"">It was =
suggest that I try starting vdsm from the shell so I could see the =
output in an effort to solve my issue: <a =
href=3D"http://lists.ovirt.org/pipermail/users/2016-May/039690.html&... =
target=3D"_blank" =
class=3D"">http://lists.ovirt.org/pipermail/users/2016-May/0...
<br class=3D""><br class=3D"">Cheers,<br
class=3D"">Gervais<br =
class=3D""><br class=3D""><br
class=3D""><br class=3D""><blockquote =
type=3D"cite" class=3D"">On May 13, 2016, at 12:12 PM, Nir Soffer
<<a =
href=3D"mailto:nsoffer@redhat.com" target=3D"_blank" =
class=3D"">nsoffer(a)redhat.com</a>&gt; wrote:<br
class=3D""><br =
class=3D"">On Fri, May 13, 2016 at 3:37 PM, Gervais de Montbrun<br =
class=3D""><<a href=3D"mailto:gervais@demontbrun.com"
target=3D"_blank"=
class=3D"">gervais(a)demontbrun.com</a>&gt; wrote:<br =
class=3D""><blockquote type=3D"cite" class=3D"">Hi
Charles,<br =
class=3D""><br class=3D"">I think the problem I am having is
due to the =
setup failing and not<br class=3D"">something in vdsm configs as I have =
never gotten this server to start up<br class=3D"">properly and the =
BRIDGE ethernet interface + ovirt routes are not setup.<br
class=3D""><br =
class=3D"">I put the logs here:<br class=3D""><a =
href=3D"https://www.dropbox.com/sh/5ugyykqh1lgru9l/AACXxRYWr3tgd0WbB...
Ha?dl=3D0" target=3D"_blank" =
class=3D"">https://www.dropbox.com/sh/5ugyykqh1lgru9l/AACXxR...
5twHa?dl=3D0</a><br class=3D""><br =
class=3D"">hosted-engine--deploy-logs.zip # Logs from when I tried to =
deploy and it<br class=3D"">failed<br
class=3D"">vdsm.tar.gz # =
/var/log/vdsm<br class=3D""><br class=3D"">Output from
running vdsm from =
the command line:<br class=3D""><br
class=3D"">[root@cultivar2 log]# su =
-s /bin/bash vdsm<br class=3D""></blockquote><br
class=3D"">This cannot =
work unless supervdsmd is running...<br class=3D""><br =
class=3D""><blockquote type=3D"cite"
class=3D"">[vdsm@cultivar2 log]$ =
python /usr/share/vdsm/vdsm<br class=3D"">(PID: 6521) I am the actual =
vdsm 4.17.26-1.el7<br class=3D""><a =
href=3D"http://cultivar2.grove.silverorange.com/" target=3D"_blank" =
class=3D"">cultivar2.grove.silverorange.com</a> =
(3.10.0-327.el7.x86_64)<br class=3D"">VDSM will run with cpu affinity: =
frozenset([1])<br class=3D"">/usr/bin/taskset --all-tasks --pid =
--cpu-list 1 6521 (cwd None)<br class=3D"">SUCCESS: <err>
=3D ''; =
<rc> =3D 0<br class=3D"">Starting scheduler
vdsm.Scheduler<br =
class=3D"">started<br class=3D"">Run and protect:<br =
class=3D"">registerDomainStateChangeCallback(callbackFunc=3D<functools.=
partial object at<br class=3D"">0x381b158>)<br
class=3D"">Run and =
protect: registerDomainStateChangeCallback, Return response: None<br =
class=3D"">Trying to connect to Super Vdsm<br
class=3D"">Preparing MOM =
interface<br class=3D"">Using named unix socket =
/var/run/vdsm/mom-vdsm.sock<br class=3D"">Unregistering all secrests<br
=
class=3D"">trying to connect libvirt<br class=3D"">recovery:
started<br =
class=3D"">Setting channels' timeout to 30 seconds.<br
class=3D"">Starting=
VM channels listener thread.<br class=3D"">Listening at <a =
href=3D"http://0.0.0.0:54321/" target=3D"_blank" =
class=3D"">0.0.0.0:54321</a><br class=3D"">Adding
detector =
<rpc.bindingxmlrpc.XmlDetector instance at 0x3b4ecb0><br =
class=3D"">recovery: completed in 0s<br class=3D"">Adding
detector =
<yajsonrpc.stompreactor.StompDetector instance at 0x382e5a8><br =
class=3D"">Starting executor<br class=3D"">Starting worker =
jsonrpc.Executor/0<br class=3D"">Worker started<br
class=3D"">Starting =
worker jsonrpc.Executor/1<br class=3D"">Worker started<br =
class=3D"">Starting worker jsonrpc.Executor/2<br
class=3D"">Worker =
started<br class=3D"">Starting worker jsonrpc.Executor/3<br =
class=3D"">Worker started<br class=3D"">Starting worker =
jsonrpc.Executor/4<br class=3D"">Worker started<br
class=3D"">Starting =
worker jsonrpc.Executor/5<br class=3D"">Worker started<br =
class=3D"">Starting worker jsonrpc.Executor/6<br
class=3D"">Worker =
started<br class=3D"">Starting worker jsonrpc.Executor/7<br =
class=3D"">Worker started<br class=3D"">XMLRPC server
running<br =
class=3D"">Starting executor<br class=3D"">Starting worker
periodic/0<br =
class=3D"">Worker started<br class=3D"">Starting worker
periodic/1<br =
class=3D"">Worker started<br class=3D"">Starting worker
periodic/2<br =
class=3D"">Worker started<br class=3D"">Starting worker
periodic/3<br =
class=3D"">Worker started<br class=3D"">trying to connect
libvirt<br =
class=3D"">Panic: Connect to supervdsm service failed: [Errno 2] No such =
file or<br class=3D"">directory<br class=3D"">Traceback
(most recent =
call last):<br class=3D"">File "/usr/share/vdsm/supervdsm.py",
line 78, =
in _connect<br class=3D""> utils.retry(self._manager.connect, =
Exception, timeout=3D60, tries=3D3)<br class=3D"">File =
"/usr/lib/python2.7/site-packages/vdsm/utils.py", line 959, in retry<br =
class=3D""> return func()<br class=3D"">File =
"/usr/lib64/python2.7/multiprocessing/managers.py", line 500, in<br =
class=3D"">connect<br class=3D""> conn =3D
Client(self._address, =
authkey=3Dself._authkey)<br class=3D"">File =
"/usr/lib64/python2.7/multiprocessing/connection.py", line 173, in<br =
class=3D"">Client<br class=3D""> c =3D
SocketClient(address)<br =
class=3D"">File
"/usr/lib64/python2.7/multiprocessing/connection.py", =
line 308, in<br class=3D"">SocketClient<br class=3D""> =
s.connect(address)<br class=3D"">File =
"/usr/lib64/python2.7/socket.py", line 224, in meth<br
class=3D""> =
return getattr(self._sock,name)(*args)<br class=3D"">error:
[Errno =
2] No such file or directory<br class=3D""></blockquote><br =
class=3D"">Vdsm tries to connect to supervdsmd on startup, and if it is =
not running<br class=3D"">it will fail.<br
class=3D""><br class=3D"">You =
can do:<br class=3D""><br class=3D"">systemctl start
supervdsmd<br =
class=3D""><br class=3D"">And they you can run vdsmd from the
shell.<br =
class=3D""><br class=3D"">But why do you need to run vdsm
from the =
shell?<br class=3D""><br class=3D"">Nir<br
class=3D""></blockquote><br =
class=3D""></div></div>
</div></blockquote></div><br
class=3D""></div></div></div></div><br =
class=3D"">_______________________________________________<br
class=3D"">
Users mailing list<br class=3D"">
<a href=3D"mailto:Users@ovirt.org"
class=3D"">Users(a)ovirt.org</a><br =
class=3D"">
<a href=3D"http://lists.ovirt.org/mailman/listinfo/users" =
rel=3D"noreferrer" target=3D"_blank" =
class=3D"">http://lists.ovirt.org/mailman/listinfo/users<... =
class=3D"">
<br class=3D""></blockquote></div><br
class=3D""></div></div>
</div></blockquote></div><br
class=3D""></div></body></html>=
--Apple-Mail=_C96C4A69-29F4-48A1-BD73-0F39D0714F1E--
8:59 p.m.
New subject: Adding another host to my cluster
--Apple-Mail=_A414C3C1-7D9D-40A8-893C-E947527ADD60
Content-Transfer-Encoding: quoted-printable
Content-Type: text/plain;
charset=us-ascii
Roy,
Thank you so much for asking for the logs on the engine. The serial.txt =
bein blank was my issue. I found a solution in the following thread =
online here: =
http://lists.ovirt.org/pipermail/users/2014-November/028870.html
I did the exact same thing that Dinuwan did to solve his issue back in =
2014 and was able to enrol my new server and install the hosted-engine =
just fine on it.
I am not certain what caused serial.txt to be empty and am will to share =
logs to anyone from the oVirt team who might want to see them. For my =
purposes, I'm considering this issue solved.
Thanks to everyone who offered advice and suggestions.
Cheers,
Gervais
On May 16, 2016, at 2:04 PM, Gervais de Montbrun =
<gervais(a)demontbrun.com> wrote:
=20
Hi Roy,
=20
I've added /var/log/ovirt-engine/engine.log to my DropBox: =
https://www.dropbox.com/sh/21lkl6ao3hv2r85/AADDMCK4Dp7UYgs5P6dMQxHKa/vdsm?=
dl=3D0 =
<https://www.dropbox.com/sh/21lkl6ao3hv2r85/AADDMCK4Dp7UYgs5P6dMQxHKa/vdsm=
?dl=3D0>
=20
When I look in the engine.log, I see the error "unable to load number =
from
serial.txt"
I did a find for serial.txt and the only file that comes up is: =
/etc/pki/ovirt-engine/serial.txt=20
(Makes sense that this is the file it wants to read)
When I open /etc/pki/ovirt-engine/serial.txt, it is an empty file.=20
[root@cultivar ovirt-engine]# cat =
/etc/pki/ovirt-engine/serial.txt
[root@cultivar ovirt-engine]#=20
=20
What should be in serial.txt?
=20
I don't understand where to find the other log that you mention in =
your email
below. I don't see any paths listed in the UI when I click on =
the failed event for certificate enrollment.
=20
Cheers,
Gervais
=20
=20
=20
> On May 15, 2016, at 5:10 PM, Roy Golan <rgolan(a)redhat.com =
<mailto:rgolan@redhat.com>> wrote:
>=20
>=20
>=20
> On Sun, May 15, 2016 at 1:32 AM, Gervais de Montbrun =
<gervais(a)demontbrun.com <mailto:gervais@demontbrun.com>> wrote:
> Hey Folks,
>=20
> I'm still stuck here... I believe the issue may be because the =
Enrolling
certificates stage is failing...
>=20
> Any idea's how to sort this out?
>=20
> I see:
> Installing Host Cultivar2. Enrolling certificate
> Failed to install Host Cultivar2. Certificate enrollment failed.
> Host Cultivar2 installation failed. Certificate enrollement =
failed.
>=20
> Any attempt to re-install fails at this step.
>=20
> Cheers,
> Gervais
>=20
>=20
>=20
> I also see in the logs that the manager (ovirt-engine) rejected the =
host
addition to the setup. Please add the =
/var/log/ovirt-engine/engine.log from the engine machine. Also, the =
engine machine has the install log - open one of the Event logs in the =
UI that says you host installation failed and you will see it retrieved =
the install log to a path under your engine. Please include this as =
well.
> =20
>=20
>> On May 13, 2016, at 1:36 PM, Gervais de Montbrun =
<gervais(a)demontbrun.com <mailto:gervais@demontbrun.com>> wrote:
>>=20
>> Hi Nir,
>>=20
>> Thank you for you input.
>>=20
>> It was suggest that I try starting vdsm from the shell so I could =
see the
output in an effort to solve my issue: =
http://lists.ovirt.org/pipermail/users/2016-May/039690.html =
<http://lists.ovirt.org/pipermail/users/2016-May/039690.html>
>>=20
>> Cheers,
>> Gervais
>>=20
>>=20
>>=20
>>> On May 13, 2016, at 12:12 PM, Nir Soffer <nsoffer(a)redhat.com =
<mailto:nsoffer@redhat.com>> wrote:
>>>=20
>>> On Fri, May 13, 2016 at 3:37 PM, Gervais de Montbrun
>>> <gervais(a)demontbrun.com <mailto:gervais@demontbrun.com>> wrote:
>>>> Hi Charles,
>>>>=20
>>>> I think the problem I am having is due to the setup failing and =
not
>>>> something in vdsm configs as I have never gotten this
server to =
start up
>>>> properly and the BRIDGE ethernet interface + ovirt
routes are not =
setup.
>>>>=20
>>>> I put the logs here:
>>>> =
https://www.dropbox.com/sh/5ugyykqh1lgru9l/AACXxRYWr3tgd0WbBVFW5twHa?dl=3D=
0 =
<https://www.dropbox.com/sh/5ugyykqh1lgru9l/AACXxRYWr3tgd0WbBVFW5twHa?dl=3D=
0>
>>>>=20
>>>> hosted-engine--deploy-logs.zip # Logs from when I tried to deploy =
and it
>>>> failed
>>>> vdsm.tar.gz # /var/log/vdsm
>>>>=20
>>>> Output from running vdsm from the command line:
>>>>=20
>>>> [root@cultivar2 log]# su -s /bin/bash vdsm
>>>=20
>>> This cannot work unless supervdsmd is running...
>>>=20
>>>> [vdsm@cultivar2 log]$ python /usr/share/vdsm/vdsm
>>>> (PID: 6521) I am the actual vdsm 4.17.26-1.el7
>>>> cultivar2.grove.silverorange.com =
<http://cultivar2.grove.silverorange.com/> (3.10.0-327.el7.x86_64)
>>>> VDSM will run with cpu affinity: frozenset([1])
>>>> /usr/bin/taskset --all-tasks --pid --cpu-list 1 6521 (cwd None)
>>>> SUCCESS: <err> =3D ''; <rc> =3D 0
>>>> Starting scheduler vdsm.Scheduler
>>>> started
>>>> Run and protect:
>>>> registerDomainStateChangeCallback(callbackFunc=3D<functools.partial =
object at
>>>> 0x381b158>)
>>>> Run and protect: registerDomainStateChangeCallback, Return =
response: None
>>>> Trying to connect to Super Vdsm
>>>> Preparing MOM interface
>>>> Using named unix socket /var/run/vdsm/mom-vdsm.sock
>>>> Unregistering all secrests
>>>> trying to connect libvirt
>>>> recovery: started
>>>> Setting channels' timeout to 30 seconds.
>>>> Starting VM channels listener thread.
>>>> Listening at 0.0.0.0:54321 <http://0.0.0.0:54321/>
>>>> Adding detector <rpc.bindingxmlrpc.XmlDetector instance at =
0x3b4ecb0>
>>>> recovery: completed in 0s
>>>> Adding detector <yajsonrpc.stompreactor.StompDetector instance at =
0x382e5a8>
>>>> Starting executor
>>>> Starting worker jsonrpc.Executor/0
>>>> Worker started
>>>> Starting worker jsonrpc.Executor/1
>>>> Worker started
>>>> Starting worker jsonrpc.Executor/2
>>>> Worker started
>>>> Starting worker jsonrpc.Executor/3
>>>> Worker started
>>>> Starting worker jsonrpc.Executor/4
>>>> Worker started
>>>> Starting worker jsonrpc.Executor/5
>>>> Worker started
>>>> Starting worker jsonrpc.Executor/6
>>>> Worker started
>>>> Starting worker jsonrpc.Executor/7
>>>> Worker started
>>>> XMLRPC server running
>>>> Starting executor
>>>> Starting worker periodic/0
>>>> Worker started
>>>> Starting worker periodic/1
>>>> Worker started
>>>> Starting worker periodic/2
>>>> Worker started
>>>> Starting worker periodic/3
>>>> Worker started
>>>> trying to connect libvirt
>>>> Panic: Connect to supervdsm service failed: [Errno 2] No such file =
or
>>>> directory
>>>> Traceback (most recent call last):
>>>> File "/usr/share/vdsm/supervdsm.py", line 78, in _connect
>>>> utils.retry(self._manager.connect, Exception, timeout=3D60, =
tries=3D3)
>>>> File
"/usr/lib/python2.7/site-packages/vdsm/utils.py", line 959, =
in retry
>>>> return func()
>>>> File "/usr/lib64/python2.7/multiprocessing/managers.py", line
500, =
in
>>>> connect
>>>> conn =3D Client(self._address, authkey=3Dself._authkey)
>>>> File "/usr/lib64/python2.7/multiprocessing/connection.py", line
=
173, in
>>>> Client
>>>> c =3D SocketClient(address)
>>>> File "/usr/lib64/python2.7/multiprocessing/connection.py", line
=
308, in
>>>> SocketClient
>>>> s.connect(address)
>>>> File "/usr/lib64/python2.7/socket.py", line 224, in meth
>>>> return getattr(self._sock,name)(*args)
>>>> error: [Errno 2] No such file or directory
>>>=20
>>> Vdsm tries to connect to supervdsmd on startup, and if it is not =
running
>>> it will fail.
>>>=20
>>> You can do:
>>>=20
>>> systemctl start supervdsmd
>>>=20
>>> And they you can run vdsmd from the shell.
>>>=20
>>> But why do you need to run vdsm from the shell?
>>>=20
>>> Nir
>>=20
>=20
>=20
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org <mailto:Users@ovirt.org>
> http://lists.ovirt.org/mailman/listinfo/users =
<http://lists.ovirt.org/mailman/listinfo/users>
>=20
>=20
=20
--Apple-Mail=_A414C3C1-7D9D-40A8-893C-E947527ADD60
Content-Transfer-Encoding: quoted-printable
Content-Type: text/html;
charset=us-ascii
<html><head><meta http-equiv=3D"Content-Type"
content=3D"text/html =
charset=3Dus-ascii"></head><body style=3D"word-wrap: break-word; =
-webkit-nbsp-mode: space; -webkit-line-break: after-white-space;" =
class=3D"">Roy,<div class=3D""><br
class=3D""></div><div class=3D"">Thank =
you so much for asking for the logs on the engine. The serial.txt bein =
blank was my issue. I found a solution in the following thread online =
here: <a =
href=3D"http://lists.ovirt.org/pipermail/users/2014-November/028870.... =
class=3D"">http://lists.ovirt.org/pipermail/users/2014-Novem...
l</a></div><div class=3D"">I did the exact same thing that
Dinuwan did =
to solve his issue back in 2014 and was able to enrol my new server and =
install the hosted-engine just fine on it.</div><div
class=3D""><div =
class=3D""><br
class=3D"webkit-block-placeholder"></div><div
class=3D"">I =
am not certain what caused serial.txt to be empty and am will to share =
logs to anyone from the oVirt team who might want to see them. For my =
purposes, I'm considering this issue solved.</div><div
class=3D""><br =
class=3D""></div><div class=3D"">Thanks to everyone who
offered advice =
and suggestions.</div><div class=3D"">
<div id=3D"signature" class=3D""><br
class=3D"">Cheers,<br =
class=3D"">Gervais<br class=3D""><br
class=3D""><br class=3D""></div>
</div>
<br class=3D""><div><blockquote type=3D"cite"
class=3D""><div =
class=3D"">On May 16, 2016, at 2:04 PM, Gervais de Montbrun <<a =
href=3D"mailto:gervais@demontbrun.com" =
class=3D"">gervais(a)demontbrun.com</a>&gt; wrote:</div><br
=
class=3D"Apple-interchange-newline"><div class=3D""><meta
=
http-equiv=3D"Content-Type" content=3D"text/html charset=3Dus-ascii"
=
class=3D""><meta http-equiv=3D"Content-Type"
content=3D"text/html =
charset=3Dus-ascii" class=3D""><meta
http-equiv=3D"Content-Type" =
content=3D"text/html charset=3Dus-ascii" class=3D""><div =
style=3D"word-wrap: break-word; -webkit-nbsp-mode: space; =
-webkit-line-break: after-white-space;" class=3D"">Hi Roy,<div =
class=3D""><br class=3D""></div><div
class=3D"">I've =
added /var/log/ovirt-engine/engine.log to my DropBox: <a =
href=3D"https://www.dropbox.com/sh/21lkl6ao3hv2r85/AADDMCK4Dp7UYgs5P...
Ka/vdsm?dl=3D0" =
class=3D"">https://www.dropbox.com/sh/21lkl6ao3hv2r85/AADDMC...
QxHKa/vdsm?dl=3D0</a></div><div class=3D""><br
class=3D""></div><div =
class=3D"">When I look in the engine.log, I see the error "unable to =
load number from serial.txt"</div><div class=3D"">I did a find
for =
serial.txt and the only file that comes up =
is: /etc/pki/ovirt-engine/serial.txt </div><div =
class=3D"">(Makes sense that this is the file it wants to =
read)</div><div class=3D"">When I =
open /etc/pki/ovirt-engine/serial.txt, it is an empty =
file. </div><div class=3D""><span
class=3D"Apple-tab-span" =
style=3D"white-space:pre"> =
</span>[root@cultivar ovirt-engine]# cat =
/etc/pki/ovirt-engine/serial.txt</div><span class=3D"Apple-tab-span" =
style=3D"white-space:pre"> =
</span>[root@cultivar ovirt-engine]# <div
class=3D""><br =
class=3D""></div><div class=3D"">What should be in
serial.txt?</div><div =
class=3D""><br class=3D""></div><div
class=3D"">I don't understand where =
to find the other log that you mention in your email below. I don't see =
any paths listed in the UI when I click on the failed event for =
certificate enrollment.<br class=3D""><div class=3D"">
<div id=3D"signature" class=3D""><br
class=3D"">Cheers,<br =
class=3D"">Gervais<br class=3D""><br
class=3D""><br class=3D""></div>
</div>
<br class=3D""><div class=3D""><blockquote
type=3D"cite" class=3D""><div =
class=3D"">On May 15, 2016, at 5:10 PM, Roy Golan <<a =
href=3D"mailto:rgolan@redhat.com"
class=3D"">rgolan(a)redhat.com</a>&gt; =
wrote:</div><br class=3D"Apple-interchange-newline"><div
class=3D""><div =
dir=3D"ltr" class=3D""><br class=3D""><div
class=3D"gmail_extra"><br =
class=3D""><div class=3D"gmail_quote">On Sun, May 15, 2016 at
1:32 AM, =
Gervais de Montbrun <span dir=3D"ltr" class=3D""><<a
=
href=3D"mailto:gervais@demontbrun.com" target=3D"_blank" =
class=3D"">gervais(a)demontbrun.com</a>&gt;</span> wrote:<br
=
class=3D""><blockquote class=3D"gmail_quote"
style=3D"margin:0 0 0 =
.8ex;border-left:1px #ccc solid;padding-left:1ex"><div =
style=3D"word-wrap:break-word" class=3D"">Hey Folks,<div
class=3D""><br =
class=3D""></div><div class=3D"">I'm still stuck
here... I believe the =
issue may be because the Enrolling certificates stage is =
failing...</div><div class=3D""><br
class=3D""></div><div class=3D"">Any =
idea's how to sort this out?</div><div class=3D""><br =
class=3D""></div><div class=3D"">I
see:</div><div class=3D""><span =
style=3D"white-space:pre-wrap" class=3D""> </span>Installing
Host =
Cultivar2. Enrolling certificate</div><div class=3D""><span =
style=3D"white-space:pre-wrap" class=3D""> </span>Failed to
install =
Host Cultivar2. Certificate enrollment failed.</div><div
class=3D""><span =
style=3D"white-space:pre-wrap" class=3D""> </span>Host
Cultivar2 =
installation failed. Certificate enrollement failed.</div><div =
class=3D""><br class=3D""></div><div
class=3D"">Any attempt to =
re-install fails at this step.</div><div class=3D""><div
class=3D"">
<div class=3D""><br class=3D"">Cheers,<br
class=3D"">Gervais<br =
class=3D""><br class=3D""><br =
class=3D""></div></div></div></div></blockquote><div
class=3D""><br =
class=3D""></div><div class=3D"">I also see in the logs
that the manager =
(ovirt-engine) rejected the host addition to the setup. Please add the =
/var/log/ovirt-engine/engine.log from the engine machine. Also, the =
engine machine has the install log - open one of the Event logs in the =
UI that says you host installation failed and you will see it retrieved =
the install log to a path under your engine. Please include this as =
well.</div><div class=3D""> </div><blockquote
class=3D"gmail_quote" =
style=3D"margin:0 0 0 .8ex;border-left:1px #ccc =
solid;padding-left:1ex"><div style=3D"word-wrap:break-word" =
class=3D""><div class=3D""><div
class=3D""><div class=3D""></div>
</div><div class=3D""><div class=3D"h5">
<br class=3D""><div class=3D""><blockquote
type=3D"cite" class=3D""><div =
class=3D"">On May 13, 2016, at 1:36 PM, Gervais de Montbrun <<a =
href=3D"mailto:gervais@demontbrun.com" target=3D"_blank" =
class=3D"">gervais(a)demontbrun.com</a>&gt; wrote:</div><br
class=3D""><div =
class=3D""><div dir=3D"ltr" class=3D""><div
dir=3D"auto" =
style=3D"word-wrap:break-word" class=3D"">Hi Nir,<br
class=3D""><br =
class=3D"">Thank you for you input.<br class=3D""><br
class=3D"">It was =
suggest that I try starting vdsm from the shell so I could see the =
output in an effort to solve my issue: <a =
href=3D"http://lists.ovirt.org/pipermail/users/2016-May/039690.html&... =
target=3D"_blank" =
class=3D"">http://lists.ovirt.org/pipermail/users/2016-May/0...
<br class=3D""><br class=3D"">Cheers,<br
class=3D"">Gervais<br =
class=3D""><br class=3D""><br
class=3D""><br class=3D""><blockquote =
type=3D"cite" class=3D"">On May 13, 2016, at 12:12 PM, Nir Soffer
<<a =
href=3D"mailto:nsoffer@redhat.com" target=3D"_blank" =
class=3D"">nsoffer(a)redhat.com</a>&gt; wrote:<br
class=3D""><br =
class=3D"">On Fri, May 13, 2016 at 3:37 PM, Gervais de Montbrun<br =
class=3D""><<a href=3D"mailto:gervais@demontbrun.com"
target=3D"_blank"=
class=3D"">gervais(a)demontbrun.com</a>&gt; wrote:<br =
class=3D""><blockquote type=3D"cite" class=3D"">Hi
Charles,<br =
class=3D""><br class=3D"">I think the problem I am having is
due to the =
setup failing and not<br class=3D"">something in vdsm configs as I have =
never gotten this server to start up<br class=3D"">properly and the =
BRIDGE ethernet interface + ovirt routes are not setup.<br
class=3D""><br =
class=3D"">I put the logs here:<br class=3D""><a =
href=3D"https://www.dropbox.com/sh/5ugyykqh1lgru9l/AACXxRYWr3tgd0WbB...
Ha?dl=3D0" target=3D"_blank" =
class=3D"">https://www.dropbox.com/sh/5ugyykqh1lgru9l/AACXxR...
5twHa?dl=3D0</a><br class=3D""><br =
class=3D"">hosted-engine--deploy-logs.zip # Logs from when I tried to =
deploy and it<br class=3D"">failed<br
class=3D"">vdsm.tar.gz # =
/var/log/vdsm<br class=3D""><br class=3D"">Output from
running vdsm from =
the command line:<br class=3D""><br
class=3D"">[root@cultivar2 log]# su =
-s /bin/bash vdsm<br class=3D""></blockquote><br
class=3D"">This cannot =
work unless supervdsmd is running...<br class=3D""><br =
class=3D""><blockquote type=3D"cite"
class=3D"">[vdsm@cultivar2 log]$ =
python /usr/share/vdsm/vdsm<br class=3D"">(PID: 6521) I am the actual =
vdsm 4.17.26-1.el7<br class=3D""><a =
href=3D"http://cultivar2.grove.silverorange.com/" target=3D"_blank" =
class=3D"">cultivar2.grove.silverorange.com</a> =
(3.10.0-327.el7.x86_64)<br class=3D"">VDSM will run with cpu affinity: =
frozenset([1])<br class=3D"">/usr/bin/taskset --all-tasks --pid =
--cpu-list 1 6521 (cwd None)<br class=3D"">SUCCESS: <err>
=3D ''; =
<rc> =3D 0<br class=3D"">Starting scheduler
vdsm.Scheduler<br =
class=3D"">started<br class=3D"">Run and protect:<br =
class=3D"">registerDomainStateChangeCallback(callbackFunc=3D<functools.=
partial object at<br class=3D"">0x381b158>)<br
class=3D"">Run and =
protect: registerDomainStateChangeCallback, Return response: None<br =
class=3D"">Trying to connect to Super Vdsm<br
class=3D"">Preparing MOM =
interface<br class=3D"">Using named unix socket =
/var/run/vdsm/mom-vdsm.sock<br class=3D"">Unregistering all secrests<br
=
class=3D"">trying to connect libvirt<br class=3D"">recovery:
started<br =
class=3D"">Setting channels' timeout to 30 seconds.<br
class=3D"">Starting=
VM channels listener thread.<br class=3D"">Listening at <a =
href=3D"http://0.0.0.0:54321/" target=3D"_blank" =
class=3D"">0.0.0.0:54321</a><br class=3D"">Adding
detector =
<rpc.bindingxmlrpc.XmlDetector instance at 0x3b4ecb0><br =
class=3D"">recovery: completed in 0s<br class=3D"">Adding
detector =
<yajsonrpc.stompreactor.StompDetector instance at 0x382e5a8><br =
class=3D"">Starting executor<br class=3D"">Starting worker =
jsonrpc.Executor/0<br class=3D"">Worker started<br
class=3D"">Starting =
worker jsonrpc.Executor/1<br class=3D"">Worker started<br =
class=3D"">Starting worker jsonrpc.Executor/2<br
class=3D"">Worker =
started<br class=3D"">Starting worker jsonrpc.Executor/3<br =
class=3D"">Worker started<br class=3D"">Starting worker =
jsonrpc.Executor/4<br class=3D"">Worker started<br
class=3D"">Starting =
worker jsonrpc.Executor/5<br class=3D"">Worker started<br =
class=3D"">Starting worker jsonrpc.Executor/6<br
class=3D"">Worker =
started<br class=3D"">Starting worker jsonrpc.Executor/7<br =
class=3D"">Worker started<br class=3D"">XMLRPC server
running<br =
class=3D"">Starting executor<br class=3D"">Starting worker
periodic/0<br =
class=3D"">Worker started<br class=3D"">Starting worker
periodic/1<br =
class=3D"">Worker started<br class=3D"">Starting worker
periodic/2<br =
class=3D"">Worker started<br class=3D"">Starting worker
periodic/3<br =
class=3D"">Worker started<br class=3D"">trying to connect
libvirt<br =
class=3D"">Panic: Connect to supervdsm service failed: [Errno 2] No such =
file or<br class=3D"">directory<br class=3D"">Traceback
(most recent =
call last):<br class=3D"">File "/usr/share/vdsm/supervdsm.py",
line 78, =
in _connect<br class=3D""> utils.retry(self._manager.connect, =
Exception, timeout=3D60, tries=3D3)<br class=3D"">File =
"/usr/lib/python2.7/site-packages/vdsm/utils.py", line 959, in retry<br =
class=3D""> return func()<br class=3D"">File =
"/usr/lib64/python2.7/multiprocessing/managers.py", line 500, in<br =
class=3D"">connect<br class=3D""> conn =3D
Client(self._address, =
authkey=3Dself._authkey)<br class=3D"">File =
"/usr/lib64/python2.7/multiprocessing/connection.py", line 173, in<br =
class=3D"">Client<br class=3D""> c =3D
SocketClient(address)<br =
class=3D"">File
"/usr/lib64/python2.7/multiprocessing/connection.py", =
line 308, in<br class=3D"">SocketClient<br class=3D""> =
s.connect(address)<br class=3D"">File =
"/usr/lib64/python2.7/socket.py", line 224, in meth<br
class=3D""> =
return getattr(self._sock,name)(*args)<br class=3D"">error:
[Errno =
2] No such file or directory<br class=3D""></blockquote><br =
class=3D"">Vdsm tries to connect to supervdsmd on startup, and if it is =
not running<br class=3D"">it will fail.<br
class=3D""><br class=3D"">You =
can do:<br class=3D""><br class=3D"">systemctl start
supervdsmd<br =
class=3D""><br class=3D"">And they you can run vdsmd from the
shell.<br =
class=3D""><br class=3D"">But why do you need to run vdsm
from the =
shell?<br class=3D""><br class=3D"">Nir<br
class=3D""></blockquote><br =
class=3D""></div></div>
</div></blockquote></div><br
class=3D""></div></div></div></div><br =
class=3D"">_______________________________________________<br
class=3D"">
Users mailing list<br class=3D"">
<a href=3D"mailto:Users@ovirt.org"
class=3D"">Users(a)ovirt.org</a><br =
class=3D"">
<a href=3D"http://lists.ovirt.org/mailman/listinfo/users" =
rel=3D"noreferrer" target=3D"_blank" =
class=3D"">http://lists.ovirt.org/mailman/listinfo/users<... =
class=3D"">
<br class=3D""></blockquote></div><br
class=3D""></div></div>
</div></blockquote></div><br =
class=3D""></div></div></div></blockquote></div><br
=
class=3D""></div></body></html>=
--Apple-Mail=_A414C3C1-7D9D-40A8-893C-E947527ADD60--
3112
days inactive
3115
days old
11 comments
4 participants
participants (4)
-
Charles Tassell -
Gervais de Montbrun -
Nir Soffer -
Roy Golan