5:22 a.m.
Hi,
I have one testing ovirt cluster with one glusterfs storage (Distributed
replicated) and 3 HV nodes...it's all working fine...but when i try to add
another glusterfs datastorage (replicateX3),i am not able to add the
datastore to ovirt and it failed with the following error :-
2015-07-29 10:05:55,194 ERROR
[org.ovirt.engine.core.vdsbroker.irsbroker.IrsBrokerCommand]
(org.ovirt.thread.pool-8-thread-32) [751c5f25]
IrsBroker::Failed::AttachStorageDomainVDS due to: IRSErrorException:
IRSGenericException: IRSErrorException: Failed to AttachStorageDomainVDS,
error = Cannot acquire host id: (u'd0e76dd4-c34a-456e-b7f6-02dc173a3cc1',
SanlockException(90, 'Sanlock lockspace add failure', 'Message too
long')),
code = 661
Engine logs :- http://paste.ubuntu.com/11957076/
Screen shots attached...
Thanks,
Punit
6:04 p.m.
New subject: can't add Datastorge | 'Sanlock lockspace add failure', 'Message too long'
Hi Punit,
Which oVirt version and VDSM version are you using?
The exception looks very similar to the scenario described here:
http://permalink.gmane.org/gmane.comp.emulators.ovirt.user/19732
Does it helps ?
Regards,
Maor
----- Original Message -----
From: "Punit Dambiwal" <hypunit(a)gmail.com>
To: users(a)ovirt.org, "Dan Kenigsberg" <danken(a)redhat.com>, "Itamar
Heim" <iheim(a)redhat.com>
Sent: Wednesday, July 29, 2015 5:22:57 AM
Subject: [ovirt-users] can't add Datastorge | 'Sanlock lockspace
add failure', 'Message too long'
Hi,
I have one testing ovirt cluster with one glusterfs storage (Distributed
replicated) and 3 HV nodes...it's all working fine...but when i try to add
another glusterfs datastorage (replicateX3),i am not able to add the
datastore to ovirt and it failed with the following error :-
2015-07-29 10:05:55,194 ERROR
[org.ovirt.engine.core.vdsbroker.irsbroker.IrsBrokerCommand]
(org.ovirt.thread.pool-8-thread-32) [751c5f25]
IrsBroker::Failed::AttachStorageDomainVDS due to: IRSErrorException:
IRSGenericException: IRSErrorException: Failed to AttachStorageDomainVDS,
error = Cannot acquire host id: (u'd0e76dd4-c34a-456e-b7f6-02dc173a3cc1',
SanlockException(90, 'Sanlock lockspace add failure', 'Message too
long')),
code = 661
Engine logs :- http://paste.ubuntu.com/11957076/
Screen shots attached...
Thanks,
Punit
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
4:15 a.m.
Hi Maor,
Ovirt Version :- 3.5.2.1-1.el7.centos
VDSM :- vdsm-4.16.20-0.el7.centos
Glusterfs version :- glusterfs-3.6.3-1.el7
http://permalink.gmane.org/gmane.comp.emulators.ovirt.user/19732 All are
there but still i am facing the same issue..
------------------------
[root@stor1 ~]# gluster volume info 3TB
Volume Name: 3TB
Type: Replicate
Volume ID: 78d1f376-178d-4b01-90c0-5dac90b50a6c
Status: Started
Number of Bricks: 1 x 3 = 3
Transport-type: tcp
Bricks:
Brick1: stor1:/bricks/b/vol2
Brick2: stor2:/bricks/b/vol2
Brick3: stor3:/bricks/b/vol2
Options Reconfigured:
storage.owner-gid: 36
storage.owner-uid: 36
cluster.server-quorum-type: server
cluster.quorum-type: auto
network.remote-dio: enable
cluster.eager-lock: enable
performance.stat-prefetch: off
performance.io-cache: off
performance.read-ahead: off
performance.quick-read: off
auth.allow: *
user.cifs: enable
nfs.disable: off
[root@stor1 ~]#
------------------------
[image: Inline image 1]
On Wed, Jul 29, 2015 at 11:04 PM, Maor Lipchuk <mlipchuk(a)redhat.com> wrote:
Hi Punit,
Which oVirt version and VDSM version are you using?
The exception looks very similar to the scenario described here:
http://permalink.gmane.org/gmane.comp.emulators.ovirt.user/19732
Does it helps ?
Regards,
Maor
----- Original Message -----
> From: "Punit Dambiwal" <hypunit(a)gmail.com>
> To: users(a)ovirt.org, "Dan Kenigsberg" <danken(a)redhat.com>,
"Itamar
Heim" <iheim(a)redhat.com>
> Sent: Wednesday, July 29, 2015 5:22:57 AM
> Subject: [ovirt-users] can't add Datastorge | 'Sanlock lockspace add
failure', 'Message too long'
>
> Hi,
>
> I have one testing ovirt cluster with one glusterfs storage (Distributed
> replicated) and 3 HV nodes...it's all working fine...but when i try to
add
> another glusterfs datastorage (replicateX3),i am not able to add the
> datastore to ovirt and it failed with the following error :-
>
> 2015-07-29 10:05:55,194 ERROR
> [org.ovirt.engine.core.vdsbroker.irsbroker.IrsBrokerCommand]
> (org.ovirt.thread.pool-8-thread-32) [751c5f25]
> IrsBroker::Failed::AttachStorageDomainVDS due to: IRSErrorException:
> IRSGenericException: IRSErrorException: Failed to AttachStorageDomainVDS,
> error = Cannot acquire host id: (u'd0e76dd4-c34a-456e-b7f6-02dc173a3cc1',
> SanlockException(90, 'Sanlock lockspace add failure', 'Message too
long')),
> code = 661
>
> Engine logs :- http://paste.ubuntu.com/11957076/
>
> Screen shots attached...
>
> Thanks,
> Punit
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
10:56 a.m.
Thanks Punit, I will take a look.
meanwhile can you please also add the sanlock log and the /var/log/messages log
Regards,
Maor
----- Original Message -----
From: "Punit Dambiwal" <hypunit(a)gmail.com>
To: "Maor Lipchuk" <mlipchuk(a)redhat.com>
Cc: users(a)ovirt.org, "Dan Kenigsberg" <danken(a)redhat.com>, "Itamar
Heim" <iheim(a)redhat.com>
Sent: Thursday, July 30, 2015 4:15:17 AM
Subject: Re: [ovirt-users] can't add Datastorge | 'Sanlock lockspace add
failure', 'Message too long'
Hi Maor,
Ovirt Version :- 3.5.2.1-1.el7.centos
VDSM :- vdsm-4.16.20-0.el7.centos
Glusterfs version :- glusterfs-3.6.3-1.el7
http://permalink.gmane.org/gmane.comp.emulators.ovirt.user/19732 All are
there but still i am facing the same issue..
------------------------
[root@stor1 ~]# gluster volume info 3TB
Volume Name: 3TB
Type: Replicate
Volume ID: 78d1f376-178d-4b01-90c0-5dac90b50a6c
Status: Started
Number of Bricks: 1 x 3 = 3
Transport-type: tcp
Bricks:
Brick1: stor1:/bricks/b/vol2
Brick2: stor2:/bricks/b/vol2
Brick3: stor3:/bricks/b/vol2
Options Reconfigured:
storage.owner-gid: 36
storage.owner-uid: 36
cluster.server-quorum-type: server
cluster.quorum-type: auto
network.remote-dio: enable
cluster.eager-lock: enable
performance.stat-prefetch: off
performance.io-cache: off
performance.read-ahead: off
performance.quick-read: off
auth.allow: *
user.cifs: enable
nfs.disable: off
[root@stor1 ~]#
------------------------
[image: Inline image 1]
On Wed, Jul 29, 2015 at 11:04 PM, Maor Lipchuk <mlipchuk(a)redhat.com> wrote:
> Hi Punit,
>
> Which oVirt version and VDSM version are you using?
> The exception looks very similar to the scenario described here:
> http://permalink.gmane.org/gmane.comp.emulators.ovirt.user/19732
> Does it helps ?
>
> Regards,
> Maor
>
>
> ----- Original Message -----
> > From: "Punit Dambiwal" <hypunit(a)gmail.com>
> > To: users(a)ovirt.org, "Dan Kenigsberg" <danken(a)redhat.com>,
"Itamar
> Heim" <iheim(a)redhat.com>
> > Sent: Wednesday, July 29, 2015 5:22:57 AM
> > Subject: [ovirt-users] can't add Datastorge | 'Sanlock lockspace add
> failure', 'Message too long'
> >
> > Hi,
> >
> > I have one testing ovirt cluster with one glusterfs storage (Distributed
> > replicated) and 3 HV nodes...it's all working fine...but when i try to
> add
> > another glusterfs datastorage (replicateX3),i am not able to add the
> > datastore to ovirt and it failed with the following error :-
> >
> > 2015-07-29 10:05:55,194 ERROR
> > [org.ovirt.engine.core.vdsbroker.irsbroker.IrsBrokerCommand]
> > (org.ovirt.thread.pool-8-thread-32) [751c5f25]
> > IrsBroker::Failed::AttachStorageDomainVDS due to: IRSErrorException:
> > IRSGenericException: IRSErrorException: Failed to AttachStorageDomainVDS,
> > error = Cannot acquire host id:
(u'd0e76dd4-c34a-456e-b7f6-02dc173a3cc1',
> > SanlockException(90, 'Sanlock lockspace add failure', 'Message too
> long')),
> > code = 661
> >
> > Engine logs :- http://paste.ubuntu.com/11957076/
> >
> > Screen shots attached...
> >
> > Thanks,
> > Punit
> >
> > _______________________________________________
> > Users mailing list
> > Users(a)ovirt.org
> > http://lists.ovirt.org/mailman/listinfo/users
> >
>
10:59 a.m.
----- Original Message -----
From: "Maor Lipchuk" <mlipchuk(a)redhat.com>
To: "Punit Dambiwal" <hypunit(a)gmail.com>
Cc: users(a)ovirt.org
Sent: Thursday, July 30, 2015 10:56:02 AM
Subject: Re: [ovirt-users] can't add Datastorge | 'Sanlock lockspace add
failure', 'Message too long'
Thanks Punit, I will take a look.
meanwhile can you please also add the sanlock log and the /var/log/messages
log
Also, please attach the full engine and vdsm logs as well
Regards,
Maor
----- Original Message -----
> From: "Punit Dambiwal" <hypunit(a)gmail.com>
> To: "Maor Lipchuk" <mlipchuk(a)redhat.com>
> Cc: users(a)ovirt.org, "Dan Kenigsberg" <danken(a)redhat.com>,
"Itamar Heim"
> <iheim(a)redhat.com>
> Sent: Thursday, July 30, 2015 4:15:17 AM
> Subject: Re: [ovirt-users] can't add Datastorge | 'Sanlock lockspace add
> failure', 'Message too long'
>
> Hi Maor,
>
> Ovirt Version :- 3.5.2.1-1.el7.centos
> VDSM :- vdsm-4.16.20-0.el7.centos
> Glusterfs version :- glusterfs-3.6.3-1.el7
>
> http://permalink.gmane.org/gmane.comp.emulators.ovirt.user/19732 All are
> there but still i am facing the same issue..
>
> ------------------------
> [root@stor1 ~]# gluster volume info 3TB
>
> Volume Name: 3TB
> Type: Replicate
> Volume ID: 78d1f376-178d-4b01-90c0-5dac90b50a6c
> Status: Started
> Number of Bricks: 1 x 3 = 3
> Transport-type: tcp
> Bricks:
> Brick1: stor1:/bricks/b/vol2
> Brick2: stor2:/bricks/b/vol2
> Brick3: stor3:/bricks/b/vol2
> Options Reconfigured:
> storage.owner-gid: 36
> storage.owner-uid: 36
> cluster.server-quorum-type: server
> cluster.quorum-type: auto
> network.remote-dio: enable
> cluster.eager-lock: enable
> performance.stat-prefetch: off
> performance.io-cache: off
> performance.read-ahead: off
> performance.quick-read: off
> auth.allow: *
> user.cifs: enable
> nfs.disable: off
> [root@stor1 ~]#
> ------------------------
>
> [image: Inline image 1]
>
>
>
> On Wed, Jul 29, 2015 at 11:04 PM, Maor Lipchuk <mlipchuk(a)redhat.com> wrote:
>
> > Hi Punit,
> >
> > Which oVirt version and VDSM version are you using?
> > The exception looks very similar to the scenario described here:
> > http://permalink.gmane.org/gmane.comp.emulators.ovirt.user/19732
> > Does it helps ?
> >
> > Regards,
> > Maor
> >
> >
> > ----- Original Message -----
> > > From: "Punit Dambiwal" <hypunit(a)gmail.com>
> > > To: users(a)ovirt.org, "Dan Kenigsberg" <danken(a)redhat.com>,
"Itamar
> > Heim" <iheim(a)redhat.com>
> > > Sent: Wednesday, July 29, 2015 5:22:57 AM
> > > Subject: [ovirt-users] can't add Datastorge | 'Sanlock lockspace
add
> > failure', 'Message too long'
> > >
> > > Hi,
> > >
> > > I have one testing ovirt cluster with one glusterfs storage
> > > (Distributed
> > > replicated) and 3 HV nodes...it's all working fine...but when i try
to
> > add
> > > another glusterfs datastorage (replicateX3),i am not able to add the
> > > datastore to ovirt and it failed with the following error :-
> > >
> > > 2015-07-29 10:05:55,194 ERROR
> > > [org.ovirt.engine.core.vdsbroker.irsbroker.IrsBrokerCommand]
> > > (org.ovirt.thread.pool-8-thread-32) [751c5f25]
> > > IrsBroker::Failed::AttachStorageDomainVDS due to: IRSErrorException:
> > > IRSGenericException: IRSErrorException: Failed to
> > > AttachStorageDomainVDS,
> > > error = Cannot acquire host id:
> > > (u'd0e76dd4-c34a-456e-b7f6-02dc173a3cc1',
> > > SanlockException(90, 'Sanlock lockspace add failure', 'Message
too
> > long')),
> > > code = 661
> > >
> > > Engine logs :- http://paste.ubuntu.com/11957076/
> > >
> > > Screen shots attached...
> > >
> > > Thanks,
> > > Punit
> > >
> > > _______________________________________________
> > > Users mailing list
> > > Users(a)ovirt.org
> > > http://lists.ovirt.org/mailman/listinfo/users
> > >
> >
>
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
11:48 a.m.
Hi Maor,
Please find the below logs :-
1. Engine logs :- http://paste.ubuntu.com/11971901/
2. Sanlock lock (HV1) :- http://paste.ubuntu.com/11971916/
3. VDSM Logs (HV1) :- http://paste.ubuntu.com/11971926/
4. Sanlock lock (HV2) :- http://paste.ubuntu.com/11971950/
5. VDSM Logs (HV2) :- http://paste.ubuntu.com/11971955/
6. Var Messages (HV1) :- http://paste.ubuntu.com/11971967/
7. Var Messages (HV2) :- http://paste.ubuntu.com/11971977/
The storage can be mount but in the ovirt it's failed to attached...
[image: Inline image 1]
On Thu, Jul 30, 2015 at 3:59 PM, Maor Lipchuk <mlipchuk(a)redhat.com> wrote:
----- Original Message -----
> From: "Maor Lipchuk" <mlipchuk(a)redhat.com>
> To: "Punit Dambiwal" <hypunit(a)gmail.com>
> Cc: users(a)ovirt.org
> Sent: Thursday, July 30, 2015 10:56:02 AM
> Subject: Re: [ovirt-users] can't add Datastorge | 'Sanlock lockspace add
failure', 'Message too long'
>
> Thanks Punit, I will take a look.
> meanwhile can you please also add the sanlock log and the
/var/log/messages
> log
Also, please attach the full engine and vdsm logs as well
>
> Regards,
> Maor
>
>
>
>
> ----- Original Message -----
> > From: "Punit Dambiwal" <hypunit(a)gmail.com>
> > To: "Maor Lipchuk" <mlipchuk(a)redhat.com>
> > Cc: users(a)ovirt.org, "Dan Kenigsberg" <danken(a)redhat.com>,
"Itamar
Heim"
> > <iheim(a)redhat.com>
> > Sent: Thursday, July 30, 2015 4:15:17 AM
> > Subject: Re: [ovirt-users] can't add Datastorge | 'Sanlock lockspace
add
> > failure', 'Message too long'
> >
> > Hi Maor,
> >
> > Ovirt Version :- 3.5.2.1-1.el7.centos
> > VDSM :- vdsm-4.16.20-0.el7.centos
> > Glusterfs version :- glusterfs-3.6.3-1.el7
> >
> > http://permalink.gmane.org/gmane.comp.emulators.ovirt.user/19732
All are
> > there but still i am facing the same issue..
> >
> > ------------------------
> > [root@stor1 ~]# gluster volume info 3TB
> >
> > Volume Name: 3TB
> > Type: Replicate
> > Volume ID: 78d1f376-178d-4b01-90c0-5dac90b50a6c
> > Status: Started
> > Number of Bricks: 1 x 3 = 3
> > Transport-type: tcp
> > Bricks:
> > Brick1: stor1:/bricks/b/vol2
> > Brick2: stor2:/bricks/b/vol2
> > Brick3: stor3:/bricks/b/vol2
> > Options Reconfigured:
> > storage.owner-gid: 36
> > storage.owner-uid: 36
> > cluster.server-quorum-type: server
> > cluster.quorum-type: auto
> > network.remote-dio: enable
> > cluster.eager-lock: enable
> > performance.stat-prefetch: off
> > performance.io-cache: off
> > performance.read-ahead: off
> > performance.quick-read: off
> > auth.allow: *
> > user.cifs: enable
> > nfs.disable: off
> > [root@stor1 ~]#
> > ------------------------
> >
> > [image: Inline image 1]
> >
> >
> >
> > On Wed, Jul 29, 2015 at 11:04 PM, Maor Lipchuk <mlipchuk(a)redhat.com>
wrote:
> >
> > > Hi Punit,
> > >
> > > Which oVirt version and VDSM version are you using?
> > > The exception looks very similar to the scenario described here:
> > > http://permalink.gmane.org/gmane.comp.emulators.ovirt.user/19732
> > > Does it helps ?
> > >
> > > Regards,
> > > Maor
> > >
> > >
> > > ----- Original Message -----
> > > > From: "Punit Dambiwal" <hypunit(a)gmail.com>
> > > > To: users(a)ovirt.org, "Dan Kenigsberg"
<danken(a)redhat.com>, "Itamar
> > > Heim" <iheim(a)redhat.com>
> > > > Sent: Wednesday, July 29, 2015 5:22:57 AM
> > > > Subject: [ovirt-users] can't add Datastorge | 'Sanlock
lockspace
add
> > > failure', 'Message too long'
> > > >
> > > > Hi,
> > > >
> > > > I have one testing ovirt cluster with one glusterfs storage
> > > > (Distributed
> > > > replicated) and 3 HV nodes...it's all working fine...but when i
try to
> > > add
> > > > another glusterfs datastorage (replicateX3),i am not able to add
the
> > > > datastore to ovirt and it failed with the following error :-
> > > >
> > > > 2015-07-29 10:05:55,194 ERROR
> > > > [org.ovirt.engine.core.vdsbroker.irsbroker.IrsBrokerCommand]
> > > > (org.ovirt.thread.pool-8-thread-32) [751c5f25]
> > > > IrsBroker::Failed::AttachStorageDomainVDS due to:
IRSErrorException:
> > > > IRSGenericException: IRSErrorException: Failed to
> > > > AttachStorageDomainVDS,
> > > > error = Cannot acquire host id:
> > > > (u'd0e76dd4-c34a-456e-b7f6-02dc173a3cc1',
> > > > SanlockException(90, 'Sanlock lockspace add failure',
'Message too
> > > long')),
> > > > code = 661
> > > >
> > > > Engine logs :- http://paste.ubuntu.com/11957076/
> > > >
> > > > Screen shots attached...
> > > >
> > > > Thanks,
> > > > Punit
> > > >
> > > > _______________________________________________
> > > > Users mailing list
> > > > Users(a)ovirt.org
> > > > http://lists.ovirt.org/mailman/listinfo/users
> > > >
> > >
> >
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
11:22 a.m.
Hi Punit,
Thanks for the logs, I didn't found the origin of the problem,
perhaps you can try to see if stopping the VDSM service and restart the sanlock service
can help.
Ala, I know you handled some Gluster issues recently, do you have any insight about this?
Have you encountered something similar?
Regards,
Maor
----- Original Message -----
From: "Punit Dambiwal" <hypunit(a)gmail.com>
To: "Maor Lipchuk" <mlipchuk(a)redhat.com>
Cc: users(a)ovirt.org
Sent: Friday, July 31, 2015 11:48:41 AM
Subject: Re: [ovirt-users] can't add Datastorge | 'Sanlock lockspace add
failure', 'Message too long'
Hi Maor,
Please find the below logs :-
1. Engine logs :- http://paste.ubuntu.com/11971901/
2. Sanlock lock (HV1) :- http://paste.ubuntu.com/11971916/
3. VDSM Logs (HV1) :- http://paste.ubuntu.com/11971926/
4. Sanlock lock (HV2) :- http://paste.ubuntu.com/11971950/
5. VDSM Logs (HV2) :- http://paste.ubuntu.com/11971955/
6. Var Messages (HV1) :- http://paste.ubuntu.com/11971967/
7. Var Messages (HV2) :- http://paste.ubuntu.com/11971977/
The storage can be mount but in the ovirt it's failed to attached...
[image: Inline image 1]
On Thu, Jul 30, 2015 at 3:59 PM, Maor Lipchuk <mlipchuk(a)redhat.com> wrote:
>
>
>
>
> ----- Original Message -----
> > From: "Maor Lipchuk" <mlipchuk(a)redhat.com>
> > To: "Punit Dambiwal" <hypunit(a)gmail.com>
> > Cc: users(a)ovirt.org
> > Sent: Thursday, July 30, 2015 10:56:02 AM
> > Subject: Re: [ovirt-users] can't add Datastorge | 'Sanlock lockspace
add
> failure', 'Message too long'
> >
> > Thanks Punit, I will take a look.
> > meanwhile can you please also add the sanlock log and the
> /var/log/messages
> > log
>
> Also, please attach the full engine and vdsm logs as well
>
> >
> > Regards,
> > Maor
> >
> >
> >
> >
> > ----- Original Message -----
> > > From: "Punit Dambiwal" <hypunit(a)gmail.com>
> > > To: "Maor Lipchuk" <mlipchuk(a)redhat.com>
> > > Cc: users(a)ovirt.org, "Dan Kenigsberg" <danken(a)redhat.com>,
"Itamar
> Heim"
> > > <iheim(a)redhat.com>
> > > Sent: Thursday, July 30, 2015 4:15:17 AM
> > > Subject: Re: [ovirt-users] can't add Datastorge | 'Sanlock
lockspace
> add
> > > failure', 'Message too long'
> > >
> > > Hi Maor,
> > >
> > > Ovirt Version :- 3.5.2.1-1.el7.centos
> > > VDSM :- vdsm-4.16.20-0.el7.centos
> > > Glusterfs version :- glusterfs-3.6.3-1.el7
> > >
> > > http://permalink.gmane.org/gmane.comp.emulators.ovirt.user/19732
> All are
> > > there but still i am facing the same issue..
> > >
> > > ------------------------
> > > [root@stor1 ~]# gluster volume info 3TB
> > >
> > > Volume Name: 3TB
> > > Type: Replicate
> > > Volume ID: 78d1f376-178d-4b01-90c0-5dac90b50a6c
> > > Status: Started
> > > Number of Bricks: 1 x 3 = 3
> > > Transport-type: tcp
> > > Bricks:
> > > Brick1: stor1:/bricks/b/vol2
> > > Brick2: stor2:/bricks/b/vol2
> > > Brick3: stor3:/bricks/b/vol2
> > > Options Reconfigured:
> > > storage.owner-gid: 36
> > > storage.owner-uid: 36
> > > cluster.server-quorum-type: server
> > > cluster.quorum-type: auto
> > > network.remote-dio: enable
> > > cluster.eager-lock: enable
> > > performance.stat-prefetch: off
> > > performance.io-cache: off
> > > performance.read-ahead: off
> > > performance.quick-read: off
> > > auth.allow: *
> > > user.cifs: enable
> > > nfs.disable: off
> > > [root@stor1 ~]#
> > > ------------------------
> > >
> > > [image: Inline image 1]
> > >
> > >
> > >
> > > On Wed, Jul 29, 2015 at 11:04 PM, Maor Lipchuk
<mlipchuk(a)redhat.com>
> wrote:
> > >
> > > > Hi Punit,
> > > >
> > > > Which oVirt version and VDSM version are you using?
> > > > The exception looks very similar to the scenario described here:
> > > > http://permalink.gmane.org/gmane.comp.emulators.ovirt.user/19732
> > > > Does it helps ?
> > > >
> > > > Regards,
> > > > Maor
> > > >
> > > >
> > > > ----- Original Message -----
> > > > > From: "Punit Dambiwal" <hypunit(a)gmail.com>
> > > > > To: users(a)ovirt.org, "Dan Kenigsberg"
<danken(a)redhat.com>, "Itamar
> > > > Heim" <iheim(a)redhat.com>
> > > > > Sent: Wednesday, July 29, 2015 5:22:57 AM
> > > > > Subject: [ovirt-users] can't add Datastorge | 'Sanlock
lockspace
> add
> > > > failure', 'Message too long'
> > > > >
> > > > > Hi,
> > > > >
> > > > > I have one testing ovirt cluster with one glusterfs storage
> > > > > (Distributed
> > > > > replicated) and 3 HV nodes...it's all working fine...but
when i
> try to
> > > > add
> > > > > another glusterfs datastorage (replicateX3),i am not able to
add
> the
> > > > > datastore to ovirt and it failed with the following error :-
> > > > >
> > > > > 2015-07-29 10:05:55,194 ERROR
> > > > > [org.ovirt.engine.core.vdsbroker.irsbroker.IrsBrokerCommand]
> > > > > (org.ovirt.thread.pool-8-thread-32) [751c5f25]
> > > > > IrsBroker::Failed::AttachStorageDomainVDS due to:
> IRSErrorException:
> > > > > IRSGenericException: IRSErrorException: Failed to
> > > > > AttachStorageDomainVDS,
> > > > > error = Cannot acquire host id:
> > > > > (u'd0e76dd4-c34a-456e-b7f6-02dc173a3cc1',
> > > > > SanlockException(90, 'Sanlock lockspace add failure',
'Message too
> > > > long')),
> > > > > code = 661
> > > > >
> > > > > Engine logs :- http://paste.ubuntu.com/11957076/
> > > > >
> > > > > Screen shots attached...
> > > > >
> > > > > Thanks,
> > > > > Punit
> > > > >
> > > > > _______________________________________________
> > > > > Users mailing list
> > > > > Users(a)ovirt.org
> > > > > http://lists.ovirt.org/mailman/listinfo/users
> > > > >
> > > >
> > >
> > _______________________________________________
> > Users mailing list
> > Users(a)ovirt.org
> > http://lists.ovirt.org/mailman/listinfo/users
> >
>
5:42 a.m.
Hi Maor,
Already tired with vdsm and sanlock service restart but nothing help...
Yes...i was facing some gluster issues earlier but those all resolved...but
now i am stuck in Ovirt part...please help to solve this issue..
On Sun, Aug 2, 2015 at 4:22 PM, Maor Lipchuk <mlipchuk(a)redhat.com> wrote:
Hi Punit,
Thanks for the logs, I didn't found the origin of the problem,
perhaps you can try to see if stopping the VDSM service and restart the
sanlock service can help.
Ala, I know you handled some Gluster issues recently, do you have any
insight about this? Have you encountered something similar?
Regards,
Maor
----- Original Message -----
> From: "Punit Dambiwal" <hypunit(a)gmail.com>
> To: "Maor Lipchuk" <mlipchuk(a)redhat.com>
> Cc: users(a)ovirt.org
> Sent: Friday, July 31, 2015 11:48:41 AM
> Subject: Re: [ovirt-users] can't add Datastorge | 'Sanlock lockspace add
failure', 'Message too long'
>
> Hi Maor,
>
> Please find the below logs :-
>
> 1. Engine logs :- http://paste.ubuntu.com/11971901/
> 2. Sanlock lock (HV1) :- http://paste.ubuntu.com/11971916/
> 3. VDSM Logs (HV1) :- http://paste.ubuntu.com/11971926/
> 4. Sanlock lock (HV2) :- http://paste.ubuntu.com/11971950/
> 5. VDSM Logs (HV2) :- http://paste.ubuntu.com/11971955/
> 6. Var Messages (HV1) :- http://paste.ubuntu.com/11971967/
> 7. Var Messages (HV2) :- http://paste.ubuntu.com/11971977/
>
> The storage can be mount but in the ovirt it's failed to attached...
>
> [image: Inline image 1]
>
> On Thu, Jul 30, 2015 at 3:59 PM, Maor Lipchuk <mlipchuk(a)redhat.com>
wrote:
>
> >
> >
> >
> >
> > ----- Original Message -----
> > > From: "Maor Lipchuk" <mlipchuk(a)redhat.com>
> > > To: "Punit Dambiwal" <hypunit(a)gmail.com>
> > > Cc: users(a)ovirt.org
> > > Sent: Thursday, July 30, 2015 10:56:02 AM
> > > Subject: Re: [ovirt-users] can't add Datastorge | 'Sanlock
lockspace
add
> > failure', 'Message too long'
> > >
> > > Thanks Punit, I will take a look.
> > > meanwhile can you please also add the sanlock log and the
> > /var/log/messages
> > > log
> >
> > Also, please attach the full engine and vdsm logs as well
> >
> > >
> > > Regards,
> > > Maor
> > >
> > >
> > >
> > >
> > > ----- Original Message -----
> > > > From: "Punit Dambiwal" <hypunit(a)gmail.com>
> > > > To: "Maor Lipchuk" <mlipchuk(a)redhat.com>
> > > > Cc: users(a)ovirt.org, "Dan Kenigsberg"
<danken(a)redhat.com>, "Itamar
> > Heim"
> > > > <iheim(a)redhat.com>
> > > > Sent: Thursday, July 30, 2015 4:15:17 AM
> > > > Subject: Re: [ovirt-users] can't add Datastorge | 'Sanlock
lockspace
> > add
> > > > failure', 'Message too long'
> > > >
> > > > Hi Maor,
> > > >
> > > > Ovirt Version :- 3.5.2.1-1.el7.centos
> > > > VDSM :- vdsm-4.16.20-0.el7.centos
> > > > Glusterfs version :- glusterfs-3.6.3-1.el7
> > > >
> > > > http://permalink.gmane.org/gmane.comp.emulators.ovirt.user/19732
> > All are
> > > > there but still i am facing the same issue..
> > > >
> > > > ------------------------
> > > > [root@stor1 ~]# gluster volume info 3TB
> > > >
> > > > Volume Name: 3TB
> > > > Type: Replicate
> > > > Volume ID: 78d1f376-178d-4b01-90c0-5dac90b50a6c
> > > > Status: Started
> > > > Number of Bricks: 1 x 3 = 3
> > > > Transport-type: tcp
> > > > Bricks:
> > > > Brick1: stor1:/bricks/b/vol2
> > > > Brick2: stor2:/bricks/b/vol2
> > > > Brick3: stor3:/bricks/b/vol2
> > > > Options Reconfigured:
> > > > storage.owner-gid: 36
> > > > storage.owner-uid: 36
> > > > cluster.server-quorum-type: server
> > > > cluster.quorum-type: auto
> > > > network.remote-dio: enable
> > > > cluster.eager-lock: enable
> > > > performance.stat-prefetch: off
> > > > performance.io-cache: off
> > > > performance.read-ahead: off
> > > > performance.quick-read: off
> > > > auth.allow: *
> > > > user.cifs: enable
> > > > nfs.disable: off
> > > > [root@stor1 ~]#
> > > > ------------------------
> > > >
> > > > [image: Inline image 1]
> > > >
> > > >
> > > >
> > > > On Wed, Jul 29, 2015 at 11:04 PM, Maor Lipchuk <
mlipchuk(a)redhat.com>
> > wrote:
> > > >
> > > > > Hi Punit,
> > > > >
> > > > > Which oVirt version and VDSM version are you using?
> > > > > The exception looks very similar to the scenario described
here:
> > > > >
http://permalink.gmane.org/gmane.comp.emulators.ovirt.user/19732
> > > > > Does it helps ?
> > > > >
> > > > > Regards,
> > > > > Maor
> > > > >
> > > > >
> > > > > ----- Original Message -----
> > > > > > From: "Punit Dambiwal" <hypunit(a)gmail.com>
> > > > > > To: users(a)ovirt.org, "Dan Kenigsberg"
<danken(a)redhat.com>,
"Itamar
> > > > > Heim" <iheim(a)redhat.com>
> > > > > > Sent: Wednesday, July 29, 2015 5:22:57 AM
> > > > > > Subject: [ovirt-users] can't add Datastorge |
'Sanlock
lockspace
> > add
> > > > > failure', 'Message too long'
> > > > > >
> > > > > > Hi,
> > > > > >
> > > > > > I have one testing ovirt cluster with one glusterfs
storage
> > > > > > (Distributed
> > > > > > replicated) and 3 HV nodes...it's all working
fine...but when i
> > try to
> > > > > add
> > > > > > another glusterfs datastorage (replicateX3),i am not able
to
add
> > the
> > > > > > datastore to ovirt and it failed with the following error
:-
> > > > > >
> > > > > > 2015-07-29 10:05:55,194 ERROR
> > > > > >
[org.ovirt.engine.core.vdsbroker.irsbroker.IrsBrokerCommand]
> > > > > > (org.ovirt.thread.pool-8-thread-32) [751c5f25]
> > > > > > IrsBroker::Failed::AttachStorageDomainVDS due to:
> > IRSErrorException:
> > > > > > IRSGenericException: IRSErrorException: Failed to
> > > > > > AttachStorageDomainVDS,
> > > > > > error = Cannot acquire host id:
> > > > > > (u'd0e76dd4-c34a-456e-b7f6-02dc173a3cc1',
> > > > > > SanlockException(90, 'Sanlock lockspace add
failure', 'Message
too
> > > > > long')),
> > > > > > code = 661
> > > > > >
> > > > > > Engine logs :- http://paste.ubuntu.com/11957076/
> > > > > >
> > > > > > Screen shots attached...
> > > > > >
> > > > > > Thanks,
> > > > > > Punit
> > > > > >
> > > > > > _______________________________________________
> > > > > > Users mailing list
> > > > > > Users(a)ovirt.org
> > > > > > http://lists.ovirt.org/mailman/listinfo/users
> > > > > >
> > > > >
> > > >
> > > _______________________________________________
> > > Users mailing list
> > > Users(a)ovirt.org
> > > http://lists.ovirt.org/mailman/listinfo/users
> > >
> >
>
11:08 a.m.
Can you please open a bug at https://bugzilla.redhat.com/enter_bug.cgi?product=oVirt with
all the relevant logs so we can track this
Thanks,
Maor
----- Original Message -----
From: "Punit Dambiwal" <hypunit(a)gmail.com>
To: "Maor Lipchuk" <mlipchuk(a)redhat.com>
Cc: "Ala Hino" <ahino(a)redhat.com>, users(a)ovirt.org
Sent: Monday, August 3, 2015 5:42:42 AM
Subject: Re: [ovirt-users] can't add Datastorge | 'Sanlock lockspace add
failure', 'Message too long'
Hi Maor,
Already tired with vdsm and sanlock service restart but nothing help...
Yes...i was facing some gluster issues earlier but those all resolved...but
now i am stuck in Ovirt part...please help to solve this issue..
On Sun, Aug 2, 2015 at 4:22 PM, Maor Lipchuk <mlipchuk(a)redhat.com> wrote:
> Hi Punit,
>
> Thanks for the logs, I didn't found the origin of the problem,
> perhaps you can try to see if stopping the VDSM service and restart the
> sanlock service can help.
>
> Ala, I know you handled some Gluster issues recently, do you have any
> insight about this? Have you encountered something similar?
>
> Regards,
> Maor
>
>
> ----- Original Message -----
> > From: "Punit Dambiwal" <hypunit(a)gmail.com>
> > To: "Maor Lipchuk" <mlipchuk(a)redhat.com>
> > Cc: users(a)ovirt.org
> > Sent: Friday, July 31, 2015 11:48:41 AM
> > Subject: Re: [ovirt-users] can't add Datastorge | 'Sanlock lockspace
add
> failure', 'Message too long'
> >
> > Hi Maor,
> >
> > Please find the below logs :-
> >
> > 1. Engine logs :- http://paste.ubuntu.com/11971901/
> > 2. Sanlock lock (HV1) :- http://paste.ubuntu.com/11971916/
> > 3. VDSM Logs (HV1) :- http://paste.ubuntu.com/11971926/
> > 4. Sanlock lock (HV2) :- http://paste.ubuntu.com/11971950/
> > 5. VDSM Logs (HV2) :- http://paste.ubuntu.com/11971955/
> > 6. Var Messages (HV1) :- http://paste.ubuntu.com/11971967/
> > 7. Var Messages (HV2) :- http://paste.ubuntu.com/11971977/
> >
> > The storage can be mount but in the ovirt it's failed to attached...
> >
> > [image: Inline image 1]
> >
> > On Thu, Jul 30, 2015 at 3:59 PM, Maor Lipchuk <mlipchuk(a)redhat.com>
> wrote:
> >
> > >
> > >
> > >
> > >
> > > ----- Original Message -----
> > > > From: "Maor Lipchuk" <mlipchuk(a)redhat.com>
> > > > To: "Punit Dambiwal" <hypunit(a)gmail.com>
> > > > Cc: users(a)ovirt.org
> > > > Sent: Thursday, July 30, 2015 10:56:02 AM
> > > > Subject: Re: [ovirt-users] can't add Datastorge | 'Sanlock
lockspace
> add
> > > failure', 'Message too long'
> > > >
> > > > Thanks Punit, I will take a look.
> > > > meanwhile can you please also add the sanlock log and the
> > > /var/log/messages
> > > > log
> > >
> > > Also, please attach the full engine and vdsm logs as well
> > >
> > > >
> > > > Regards,
> > > > Maor
> > > >
> > > >
> > > >
> > > >
> > > > ----- Original Message -----
> > > > > From: "Punit Dambiwal" <hypunit(a)gmail.com>
> > > > > To: "Maor Lipchuk" <mlipchuk(a)redhat.com>
> > > > > Cc: users(a)ovirt.org, "Dan Kenigsberg"
<danken(a)redhat.com>, "Itamar
> > > Heim"
> > > > > <iheim(a)redhat.com>
> > > > > Sent: Thursday, July 30, 2015 4:15:17 AM
> > > > > Subject: Re: [ovirt-users] can't add Datastorge |
'Sanlock
> lockspace
> > > add
> > > > > failure', 'Message too long'
> > > > >
> > > > > Hi Maor,
> > > > >
> > > > > Ovirt Version :- 3.5.2.1-1.el7.centos
> > > > > VDSM :- vdsm-4.16.20-0.el7.centos
> > > > > Glusterfs version :- glusterfs-3.6.3-1.el7
> > > > >
> > > > >
http://permalink.gmane.org/gmane.comp.emulators.ovirt.user/19732
> > > All are
> > > > > there but still i am facing the same issue..
> > > > >
> > > > > ------------------------
> > > > > [root@stor1 ~]# gluster volume info 3TB
> > > > >
> > > > > Volume Name: 3TB
> > > > > Type: Replicate
> > > > > Volume ID: 78d1f376-178d-4b01-90c0-5dac90b50a6c
> > > > > Status: Started
> > > > > Number of Bricks: 1 x 3 = 3
> > > > > Transport-type: tcp
> > > > > Bricks:
> > > > > Brick1: stor1:/bricks/b/vol2
> > > > > Brick2: stor2:/bricks/b/vol2
> > > > > Brick3: stor3:/bricks/b/vol2
> > > > > Options Reconfigured:
> > > > > storage.owner-gid: 36
> > > > > storage.owner-uid: 36
> > > > > cluster.server-quorum-type: server
> > > > > cluster.quorum-type: auto
> > > > > network.remote-dio: enable
> > > > > cluster.eager-lock: enable
> > > > > performance.stat-prefetch: off
> > > > > performance.io-cache: off
> > > > > performance.read-ahead: off
> > > > > performance.quick-read: off
> > > > > auth.allow: *
> > > > > user.cifs: enable
> > > > > nfs.disable: off
> > > > > [root@stor1 ~]#
> > > > > ------------------------
> > > > >
> > > > > [image: Inline image 1]
> > > > >
> > > > >
> > > > >
> > > > > On Wed, Jul 29, 2015 at 11:04 PM, Maor Lipchuk <
> mlipchuk(a)redhat.com>
> > > wrote:
> > > > >
> > > > > > Hi Punit,
> > > > > >
> > > > > > Which oVirt version and VDSM version are you using?
> > > > > > The exception looks very similar to the scenario described
here:
> > > > > >
http://permalink.gmane.org/gmane.comp.emulators.ovirt.user/19732
> > > > > > Does it helps ?
> > > > > >
> > > > > > Regards,
> > > > > > Maor
> > > > > >
> > > > > >
> > > > > > ----- Original Message -----
> > > > > > > From: "Punit Dambiwal"
<hypunit(a)gmail.com>
> > > > > > > To: users(a)ovirt.org, "Dan Kenigsberg"
<danken(a)redhat.com>,
> "Itamar
> > > > > > Heim" <iheim(a)redhat.com>
> > > > > > > Sent: Wednesday, July 29, 2015 5:22:57 AM
> > > > > > > Subject: [ovirt-users] can't add Datastorge |
'Sanlock
> lockspace
> > > add
> > > > > > failure', 'Message too long'
> > > > > > >
> > > > > > > Hi,
> > > > > > >
> > > > > > > I have one testing ovirt cluster with one glusterfs
storage
> > > > > > > (Distributed
> > > > > > > replicated) and 3 HV nodes...it's all working
fine...but when i
> > > try to
> > > > > > add
> > > > > > > another glusterfs datastorage (replicateX3),i am not
able to
> add
> > > the
> > > > > > > datastore to ovirt and it failed with the following
error :-
> > > > > > >
> > > > > > > 2015-07-29 10:05:55,194 ERROR
> > > > > > >
[org.ovirt.engine.core.vdsbroker.irsbroker.IrsBrokerCommand]
> > > > > > > (org.ovirt.thread.pool-8-thread-32) [751c5f25]
> > > > > > > IrsBroker::Failed::AttachStorageDomainVDS due to:
> > > IRSErrorException:
> > > > > > > IRSGenericException: IRSErrorException: Failed to
> > > > > > > AttachStorageDomainVDS,
> > > > > > > error = Cannot acquire host id:
> > > > > > > (u'd0e76dd4-c34a-456e-b7f6-02dc173a3cc1',
> > > > > > > SanlockException(90, 'Sanlock lockspace add
failure', 'Message
> too
> > > > > > long')),
> > > > > > > code = 661
> > > > > > >
> > > > > > > Engine logs :- http://paste.ubuntu.com/11957076/
> > > > > > >
> > > > > > > Screen shots attached...
> > > > > > >
> > > > > > > Thanks,
> > > > > > > Punit
> > > > > > >
> > > > > > > _______________________________________________
> > > > > > > Users mailing list
> > > > > > > Users(a)ovirt.org
> > > > > > > http://lists.ovirt.org/mailman/listinfo/users
> > > > > > >
> > > > > >
> > > > >
> > > > _______________________________________________
> > > > Users mailing list
> > > > Users(a)ovirt.org
> > > > http://lists.ovirt.org/mailman/listinfo/users
> > > >
> > >
> >
>
3:56 a.m.
Hi Maor,
I submitted the bug here :-
https://bugzilla.redhat.com/show_bug.cgi?id=1249851
Thanks,
Punit
On Mon, Aug 3, 2015 at 4:08 PM, Maor Lipchuk <mlipchuk(a)redhat.com> wrote:
Can you please open a bug at
https://bugzilla.redhat.com/enter_bug.cgi?product=oVirt with all the
relevant logs so we can track this
Thanks,
Maor
----- Original Message -----
> From: "Punit Dambiwal" <hypunit(a)gmail.com>
> To: "Maor Lipchuk" <mlipchuk(a)redhat.com>
> Cc: "Ala Hino" <ahino(a)redhat.com>, users(a)ovirt.org
> Sent: Monday, August 3, 2015 5:42:42 AM
> Subject: Re: [ovirt-users] can't add Datastorge | 'Sanlock lockspace add
failure', 'Message too long'
>
> Hi Maor,
>
> Already tired with vdsm and sanlock service restart but nothing help...
>
> Yes...i was facing some gluster issues earlier but those all
resolved...but
> now i am stuck in Ovirt part...please help to solve this issue..
>
> On Sun, Aug 2, 2015 at 4:22 PM, Maor Lipchuk <mlipchuk(a)redhat.com>
wrote:
>
> > Hi Punit,
> >
> > Thanks for the logs, I didn't found the origin of the problem,
> > perhaps you can try to see if stopping the VDSM service and restart the
> > sanlock service can help.
> >
> > Ala, I know you handled some Gluster issues recently, do you have any
> > insight about this? Have you encountered something similar?
> >
> > Regards,
> > Maor
> >
> >
> > ----- Original Message -----
> > > From: "Punit Dambiwal" <hypunit(a)gmail.com>
> > > To: "Maor Lipchuk" <mlipchuk(a)redhat.com>
> > > Cc: users(a)ovirt.org
> > > Sent: Friday, July 31, 2015 11:48:41 AM
> > > Subject: Re: [ovirt-users] can't add Datastorge | 'Sanlock
lockspace
add
> > failure', 'Message too long'
> > >
> > > Hi Maor,
> > >
> > > Please find the below logs :-
> > >
> > > 1. Engine logs :- http://paste.ubuntu.com/11971901/
> > > 2. Sanlock lock (HV1) :- http://paste.ubuntu.com/11971916/
> > > 3. VDSM Logs (HV1) :- http://paste.ubuntu.com/11971926/
> > > 4. Sanlock lock (HV2) :- http://paste.ubuntu.com/11971950/
> > > 5. VDSM Logs (HV2) :- http://paste.ubuntu.com/11971955/
> > > 6. Var Messages (HV1) :- http://paste.ubuntu.com/11971967/
> > > 7. Var Messages (HV2) :- http://paste.ubuntu.com/11971977/
> > >
> > > The storage can be mount but in the ovirt it's failed to attached...
> > >
> > > [image: Inline image 1]
> > >
> > > On Thu, Jul 30, 2015 at 3:59 PM, Maor Lipchuk <mlipchuk(a)redhat.com>
> > wrote:
> > >
> > > >
> > > >
> > > >
> > > >
> > > > ----- Original Message -----
> > > > > From: "Maor Lipchuk" <mlipchuk(a)redhat.com>
> > > > > To: "Punit Dambiwal" <hypunit(a)gmail.com>
> > > > > Cc: users(a)ovirt.org
> > > > > Sent: Thursday, July 30, 2015 10:56:02 AM
> > > > > Subject: Re: [ovirt-users] can't add Datastorge |
'Sanlock
lockspace
> > add
> > > > failure', 'Message too long'
> > > > >
> > > > > Thanks Punit, I will take a look.
> > > > > meanwhile can you please also add the sanlock log and the
> > > > /var/log/messages
> > > > > log
> > > >
> > > > Also, please attach the full engine and vdsm logs as well
> > > >
> > > > >
> > > > > Regards,
> > > > > Maor
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > ----- Original Message -----
> > > > > > From: "Punit Dambiwal" <hypunit(a)gmail.com>
> > > > > > To: "Maor Lipchuk" <mlipchuk(a)redhat.com>
> > > > > > Cc: users(a)ovirt.org, "Dan Kenigsberg"
<danken(a)redhat.com>,
"Itamar
> > > > Heim"
> > > > > > <iheim(a)redhat.com>
> > > > > > Sent: Thursday, July 30, 2015 4:15:17 AM
> > > > > > Subject: Re: [ovirt-users] can't add Datastorge |
'Sanlock
> > lockspace
> > > > add
> > > > > > failure', 'Message too long'
> > > > > >
> > > > > > Hi Maor,
> > > > > >
> > > > > > Ovirt Version :- 3.5.2.1-1.el7.centos
> > > > > > VDSM :- vdsm-4.16.20-0.el7.centos
> > > > > > Glusterfs version :- glusterfs-3.6.3-1.el7
> > > > > >
> > > > > >
http://permalink.gmane.org/gmane.comp.emulators.ovirt.user/19732
> > > > All are
> > > > > > there but still i am facing the same issue..
> > > > > >
> > > > > > ------------------------
> > > > > > [root@stor1 ~]# gluster volume info 3TB
> > > > > >
> > > > > > Volume Name: 3TB
> > > > > > Type: Replicate
> > > > > > Volume ID: 78d1f376-178d-4b01-90c0-5dac90b50a6c
> > > > > > Status: Started
> > > > > > Number of Bricks: 1 x 3 = 3
> > > > > > Transport-type: tcp
> > > > > > Bricks:
> > > > > > Brick1: stor1:/bricks/b/vol2
> > > > > > Brick2: stor2:/bricks/b/vol2
> > > > > > Brick3: stor3:/bricks/b/vol2
> > > > > > Options Reconfigured:
> > > > > > storage.owner-gid: 36
> > > > > > storage.owner-uid: 36
> > > > > > cluster.server-quorum-type: server
> > > > > > cluster.quorum-type: auto
> > > > > > network.remote-dio: enable
> > > > > > cluster.eager-lock: enable
> > > > > > performance.stat-prefetch: off
> > > > > > performance.io-cache: off
> > > > > > performance.read-ahead: off
> > > > > > performance.quick-read: off
> > > > > > auth.allow: *
> > > > > > user.cifs: enable
> > > > > > nfs.disable: off
> > > > > > [root@stor1 ~]#
> > > > > > ------------------------
> > > > > >
> > > > > > [image: Inline image 1]
> > > > > >
> > > > > >
> > > > > >
> > > > > > On Wed, Jul 29, 2015 at 11:04 PM, Maor Lipchuk <
> > mlipchuk(a)redhat.com>
> > > > wrote:
> > > > > >
> > > > > > > Hi Punit,
> > > > > > >
> > > > > > > Which oVirt version and VDSM version are you using?
> > > > > > > The exception looks very similar to the scenario
described
here:
> > > > > > >
http://permalink.gmane.org/gmane.comp.emulators.ovirt.user/19732
> > > > > > > Does it helps ?
> > > > > > >
> > > > > > > Regards,
> > > > > > > Maor
> > > > > > >
> > > > > > >
> > > > > > > ----- Original Message -----
> > > > > > > > From: "Punit Dambiwal"
<hypunit(a)gmail.com>
> > > > > > > > To: users(a)ovirt.org, "Dan Kenigsberg"
<danken(a)redhat.com>,
> > "Itamar
> > > > > > > Heim" <iheim(a)redhat.com>
> > > > > > > > Sent: Wednesday, July 29, 2015 5:22:57 AM
> > > > > > > > Subject: [ovirt-users] can't add Datastorge |
'Sanlock
> > lockspace
> > > > add
> > > > > > > failure', 'Message too long'
> > > > > > > >
> > > > > > > > Hi,
> > > > > > > >
> > > > > > > > I have one testing ovirt cluster with one
glusterfs storage
> > > > > > > > (Distributed
> > > > > > > > replicated) and 3 HV nodes...it's all working
fine...but
when i
> > > > try to
> > > > > > > add
> > > > > > > > another glusterfs datastorage (replicateX3),i am
not able
to
> > add
> > > > the
> > > > > > > > datastore to ovirt and it failed with the
following error
:-
> > > > > > > >
> > > > > > > > 2015-07-29 10:05:55,194 ERROR
> > > > > > > >
[org.ovirt.engine.core.vdsbroker.irsbroker.IrsBrokerCommand]
> > > > > > > > (org.ovirt.thread.pool-8-thread-32) [751c5f25]
> > > > > > > > IrsBroker::Failed::AttachStorageDomainVDS due
to:
> > > > IRSErrorException:
> > > > > > > > IRSGenericException: IRSErrorException: Failed
to
> > > > > > > > AttachStorageDomainVDS,
> > > > > > > > error = Cannot acquire host id:
> > > > > > > >
(u'd0e76dd4-c34a-456e-b7f6-02dc173a3cc1',
> > > > > > > > SanlockException(90, 'Sanlock lockspace add
failure',
'Message
> > too
> > > > > > > long')),
> > > > > > > > code = 661
> > > > > > > >
> > > > > > > > Engine logs :- http://paste.ubuntu.com/11957076/
> > > > > > > >
> > > > > > > > Screen shots attached...
> > > > > > > >
> > > > > > > > Thanks,
> > > > > > > > Punit
> > > > > > > >
> > > > > > > > _______________________________________________
> > > > > > > > Users mailing list
> > > > > > > > Users(a)ovirt.org
> > > > > > > > http://lists.ovirt.org/mailman/listinfo/users
> > > > > > > >
> > > > > > >
> > > > > >
> > > > > _______________________________________________
> > > > > Users mailing list
> > > > > Users(a)ovirt.org
> > > > > http://lists.ovirt.org/mailman/listinfo/users
> > > > >
> > > >
> > >
> >
>
3399
days inactive
3405
days old
9 comments
2 participants
participants (2)
-
Maor Lipchuk -
Punit Dambiwal