6:04 a.m.
I'm reading the documentation here :
http://www.ovirt.org/documentation/admin-guide/serial-console-setup/
After a few strace, I found the ssh configuration used for the custom ssh that listen on
port 2222:
/usr/share/ovirt-vmconsole/ovirt-vmconsole-proxy/ovirt-vmconsole-proxy-sshd/sshd_config
And I have a big problem with it.
It says "GSSAPIAuthentication no" but public key authentication is not allowed
in my data center, we use kerberos every where.
So I wonder if I can edit this file ? How is it managed by ovirt ?
I can always use puppet to modify just this line, it will be fine for me.
The point 4 in Automatic Setup is not very helpfull:
" • once the setup succesfully run, and once ovirt-engine is running, you can log in
and register a SSH key. (TODO: add picture)"
what does it mean ?
6:28 a.m.
On Wed, Mar 23, 2016 at 1:04 PM, Fabrice Bacchella
<fabrice.bacchella(a)orange.fr> wrote:
I'm reading the documentation here :
http://www.ovirt.org/documentation/admin-guide/serial-console-setup/
After a few strace, I found the ssh configuration used for the custom ssh that listen on
port 2222:
/usr/share/ovirt-vmconsole/ovirt-vmconsole-proxy/ovirt-vmconsole-proxy-sshd/sshd_config
And I have a big problem with it.
It says "GSSAPIAuthentication no" but public key authentication is not allowed
in my data center, we use kerberos every where.
So I wonder if I can edit this file ? How is it managed by ovirt ?
In general, things under /usr are only packaged, not "managed". So a
next upgrade will overwrite your changes.
Seems like both its systemd unit and sysv init script read
/etc/sysconfig/ovirt-vmconsole-proxy-sshd if it exists and add
${OPTIONS} to sshd's command line. So you can try to:
echo 'OPTIONS="-o GSSAPIAuthentication=yes"' >>
/etc/sysconfig/ovirt-vmconsole-proxy-sshd
and restart it.
I can always use puppet to modify just this line, it will be fine for
me.
The point 4 in Automatic Setup is not very helpfull:
" • once the setup succesfully run, and once ovirt-engine is running, you can
log in and register a SSH key. (TODO: add picture)"
what does it mean ?
No idea. Adding Francesco.
--
Didi
6:32 a.m.
----- Original Message -----
From: "Yedidyah Bar David" <didi(a)redhat.com>
To: "Fabrice Bacchella" <fabrice.bacchella(a)orange.fr>, "Francesco
Romani" <fromani(a)redhat.com>
Cc: "users" <users(a)ovirt.org>
Sent: Wednesday, March 23, 2016 12:28:52 PM
Subject: Re: [ovirt-users] seria consol setup
> I can always use puppet to modify just this line, it will be
fine for me.
>
> The point 4 in Automatic Setup is not very helpfull:
> " • once the setup succesfully run, and once ovirt-engine is running,
> you can log in and register a SSH key. (TODO: add picture)"
>
> what does it mean ?
It just means that you need to add SSH public keys for the users which want to use
the serial console.
E.g. log in user portal
in the top right corner there is the $user drop down menu, click on it
select "options"
paste public key here
HTH,
--
Francesco Romani
RedHat Engineering Virtualization R & D
Phone: 8261328
IRC: fromani
7:21 a.m.
Le 23 mars 2016 à 12:32, Francesco Romani <fromani(a)redhat.com>
a écrit :
----- Original Message -----
> From: "Yedidyah Bar David" <didi(a)redhat.com>
> To: "Fabrice Bacchella" <fabrice.bacchella(a)orange.fr>,
"Francesco Romani" <fromani(a)redhat.com>
> Cc: "users" <users(a)ovirt.org>
> Sent: Wednesday, March 23, 2016 12:28:52 PM
> Subject: Re: [ovirt-users] seria consol setup
>> I can always use puppet to modify just this line, it will be fine for me.
>>
>> The point 4 in Automatic Setup is not very helpfull:
>> " • once the setup succesfully run, and once ovirt-engine is running,
>> you can log in and register a SSH key. (TODO: add picture)"
>>
>> what does it mean ?
It just means that you need to add SSH public keys for the users which want to use
the serial console.
E.g. log in user portal
in the top right corner there is the $user drop down menu, click on it
select "options"
paste public key here
HTH,
It tried that, I didn't work. By digging in log and configuration, I think it's
because I have an Apache server in front of ovirt-engine, using a specific SSO
authentication module (using CAS), so the certificate-base authentication is failing, if
my comprehension is good. So you should add a few line about that in the documentation.
Should I make the proxy helper talks directly to tomcat by playing with ENGINE_BASE_URL in
/etc/ovirt-engine/ovirt-vmconsole-proxy-helper.conf.d ? On a https enabled connector for
tomcat ?
I have actually in my apache configuration:
<LocationMatch
^/(ovirt-engine($|/)|api($|/)|RHEVManagerWeb/|OvirtEngineWeb/|ca.crt$|engine.ssh.key.txt$|rhevm.ssh.key.txt$)>
AuthType CAS
Require valid-user
CASAuthNHeader X-Remote-User
ProxyPassMatch ajp://127.0.0.1:8702 timeout=3600 retry=5
AddOutputFilterByType DEFLATE text/javascript text/css text/html text/xml
text/json application/xml application/json application/x-yaml
</LocationMatch>
</VirtualHost>
There is also a small glitch in the documentation:
su - ovirt-vmconsole -c 'ovirt-vmconsole-proxy-keys list'
but it should be:
su - ovirt-vmconsole -c '/usr/libexec/ovirt-vmconsole-proxy-keys list'
7:32 a.m.
----- Original Message -----
From: "Fabrice Bacchella"
<fabrice.bacchella(a)orange.fr>
To: "Francesco Romani" <fromani(a)redhat.com>
Cc: "Yedidyah Bar David" <didi(a)redhat.com>, "users"
<users(a)ovirt.org>
Sent: Wednesday, March 23, 2016 1:21:11 PM
Subject: Re: [ovirt-users] seria consol setup
> Le 23 mars 2016 à 12:32, Francesco Romani <fromani(a)redhat.com> a écrit :
>
> ----- Original Message -----
>> From: "Yedidyah Bar David" <didi(a)redhat.com>
>> To: "Fabrice Bacchella" <fabrice.bacchella(a)orange.fr>,
"Francesco Romani"
>> <fromani(a)redhat.com>
>> Cc: "users" <users(a)ovirt.org>
>> Sent: Wednesday, March 23, 2016 12:28:52 PM
>> Subject: Re: [ovirt-users] seria consol setup
>
>>> I can always use puppet to modify just this line, it will be fine for me.
>>>
>>> The point 4 in Automatic Setup is not very helpfull:
>>> " • once the setup succesfully run, and once ovirt-engine is
>>> running,
>>> you can log in and register a SSH key. (TODO: add picture)"
>>>
>>> what does it mean ?
>
> It just means that you need to add SSH public keys for the users which want
> to use
> the serial console.
>
> E.g. log in user portal
> in the top right corner there is the $user drop down menu, click on it
> select "options"
> paste public key here
>
> HTH,
It tried that, I didn't work.
What didn't work? Adding the keys or -AFAIK- the full authentication?
By digging in log and configuration, I think
it's because I have an Apache server in front of ovirt-engine, using a
specific SSO authentication module (using CAS), so the certificate-base
authentication is failing, if my comprehension is good. So you should add a
few line about that in the documentation.
Will improve in this regard
Should I make the proxy helper
talks directly to tomcat by playing with ENGINE_BASE_URL in
/etc/ovirt-engine/ovirt-vmconsole-proxy-helper.conf.d ?
Yes, the proxy helper is supposed to talk directly with the Engine.
There is also a small glitch in the documentation:
su - ovirt-vmconsole -c 'ovirt-vmconsole-proxy-keys list'
but it should be:
su - ovirt-vmconsole -c '/usr/libexec/ovirt-vmconsole-proxy-keys list'
Thanks, will fix.
Bests,
--
Francesco Romani
RedHat Engineering Virtualization R & D
Phone: 8261328
IRC: fromani
8:12 a.m.
Le 23 mars 2016 à 13:32, Francesco Romani <fromani(a)redhat.com>
a écrit :
>> E.g. log in user portal
>> in the top right corner there is the $user drop down menu, click on it
>> select "options"
>> paste public key here
>>
>> HTH,
>
> It tried that, I didn't work.
What didn't work? Adding the keys or -AFAIK- the full authentication?
I was still unable to connect, but for the reasons explained latter.
So i will continue to play with my apache setup to check it if can resolve that.
10:29 a.m.
I'm trying, my configuration is still incomplete, I added in my httpd.conf:
<VirtualHost *:1443>
ServerName XXX
DocumentRoot htdocs
RedirectMatch ^/$ /ovirt-engine/
SSLEngine on
SSLCertificateFile /etc/pki/ovirt-engine/certs/apache.cer
SSLCertificateKeyFile /etc/pki/ovirt-engine/keys/apache.key.nopass
SSLCACertificateFile /etc/pki/ovirt-engine/apache-ca.pem
RequestHeader unset Expect early
<LocationMatch
^/(ovirt-engine($|/)|api($|/)|RHEVManagerWeb/|OvirtEngineWeb/|ca.crt$|engine.ssh.key.txt$|rhevm.ssh.key.txt$)>
ProxyPassMatch ajp://127.0.0.1:8702 timeout=3600 retry=5
AddOutputFilterByType DEFLATE text/javascript text/css text/html text/xml
text/json application/xml application/json application/x-yaml
</LocationMatch>
</VirtualHost>
and in /etc/ovirt-engine/ovirt-vmconsole-proxy-helper.conf.d/99-my.conf
ENGINE_BASE_URL=https://localhost:1443/ovirt-engine/
but no progress :
su - ovirt-vmconsole -c '/usr/libexec/ovirt-vmconsole-proxy-keys --debug list'
ERROR: Internal error
--debug don't provide any help
but
curl -vk -XPOST https://localhost:1443/ovirt-engine/services/vmconsole-proxy
fails of course, but because the query is no good. More messages from
ovirt-vmconsole-proxy-keys would be very helpfull.
Le 23 mars 2016 à 13:32, Francesco Romani <fromani(a)redhat.com>
a écrit :
----- Original Message -----
> From: "Fabrice Bacchella" <fabrice.bacchella(a)orange.fr>
> To: "Francesco Romani" <fromani(a)redhat.com>
> Cc: "Yedidyah Bar David" <didi(a)redhat.com>, "users"
<users(a)ovirt.org>
> Sent: Wednesday, March 23, 2016 1:21:11 PM
> Subject: Re: [ovirt-users] seria consol setup
>
>
>> Le 23 mars 2016 à 12:32, Francesco Romani <fromani(a)redhat.com> a écrit :
>>
>> ----- Original Message -----
>>> From: "Yedidyah Bar David" <didi(a)redhat.com>
>>> To: "Fabrice Bacchella" <fabrice.bacchella(a)orange.fr>,
"Francesco Romani"
>>> <fromani(a)redhat.com>
>>> Cc: "users" <users(a)ovirt.org>
>>> Sent: Wednesday, March 23, 2016 12:28:52 PM
>>> Subject: Re: [ovirt-users] seria consol setup
>>
>>>> I can always use puppet to modify just this line, it will be fine for
me.
>>>>
>>>> The point 4 in Automatic Setup is not very helpfull:
>>>> " • once the setup succesfully run, and once ovirt-engine is
>>>> running,
>>>> you can log in and register a SSH key. (TODO: add picture)"
>>>>
>>>> what does it mean ?
>>
>> It just means that you need to add SSH public keys for the users which want
>> to use
>> the serial console.
>>
>> E.g. log in user portal
>> in the top right corner there is the $user drop down menu, click on it
>> select "options"
>> paste public key here
>>
>> HTH,
>
> It tried that, I didn't work.
What didn't work? Adding the keys or -AFAIK- the full authentication?
> By digging in log and configuration, I think
> it's because I have an Apache server in front of ovirt-engine, using a
> specific SSO authentication module (using CAS), so the certificate-base
> authentication is failing, if my comprehension is good. So you should add a
> few line about that in the documentation.
Will improve in this regard
> Should I make the proxy helper
> talks directly to tomcat by playing with ENGINE_BASE_URL in
> /etc/ovirt-engine/ovirt-vmconsole-proxy-helper.conf.d ?
Yes, the proxy helper is supposed to talk directly with the Engine.
> There is also a small glitch in the documentation:
> su - ovirt-vmconsole -c 'ovirt-vmconsole-proxy-keys list'
> but it should be:
> su - ovirt-vmconsole -c '/usr/libexec/ovirt-vmconsole-proxy-keys list'
Thanks, will fix.
Bests,
--
Francesco Romani
RedHat Engineering Virtualization R & D
Phone: 8261328
IRC: fromani
10:34 a.m.
----- Original Message -----
From: "Fabrice Bacchella"
<fabrice.bacchella(a)orange.fr>
To: "Francesco Romani" <fromani(a)redhat.com>
Cc: "Yedidyah Bar David" <didi(a)redhat.com>, "users"
<users(a)ovirt.org>
Sent: Wednesday, March 23, 2016 4:29:15 PM
Subject: Re: [ovirt-users] seria consol setup
I'm trying, my configuration is still incomplete, I added in my httpd.conf:
<VirtualHost *:1443>
ServerName XXX
DocumentRoot htdocs
RedirectMatch ^/$ /ovirt-engine/
SSLEngine on
SSLCertificateFile /etc/pki/ovirt-engine/certs/apache.cer
SSLCertificateKeyFile /etc/pki/ovirt-engine/keys/apache.key.nopass
SSLCACertificateFile /etc/pki/ovirt-engine/apache-ca.pem
RequestHeader unset Expect early
<LocationMatch
^/(ovirt-engine($|/)|api($|/)|RHEVManagerWeb/|OvirtEngineWeb/|ca.crt$|engine.ssh.key.txt$|rhevm.ssh.key.txt$)>
ProxyPassMatch ajp://127.0.0.1:8702 timeout=3600 retry=5
AddOutputFilterByType DEFLATE text/javascript text/css text/html
text/xml text/json application/xml application/json
application/x-yaml
</LocationMatch>
</VirtualHost>
and in /etc/ovirt-engine/ovirt-vmconsole-proxy-helper.conf.d/99-my.conf
ENGINE_BASE_URL=https://localhost:1443/ovirt-engine/
but no progress :
su - ovirt-vmconsole -c '/usr/libexec/ovirt-vmconsole-proxy-keys --debug
list'
ERROR: Internal error
--debug don't provide any help
You should find them in the journal/system logger; otherwise it is a {different,new} bug.
Bests,
--
Francesco Romani
RedHat Engineering Virtualization R & D
Phone: 8261328
IRC: fromani
11:24 a.m.
>
> su - ovirt-vmconsole -c '/usr/libexec/ovirt-vmconsole-proxy-keys --debug
> list'
> ERROR: Internal error
>
> --debug don't provide any help
You should find them in the journal/system logger; otherwise it is a {different,new}
bug.
Ok, I found it in /var/log/messages :
... ovirt-vmconsole-list: ERROR main:274 Error: hostname 'localhost' doesn't
match u'FQDN'
But why as I do have in
/etc/ovirt-engine/ovirt-vmconsole-proxy-helper.conf.d/10-setup.conf
ENGINE_VERIFY_HOST=False
That's the default, I didn't changed it.
6:46 a.m.
Le 23 mars 2016 à 12:28, Yedidyah Bar David <didi(a)redhat.com> a
écrit :
On Wed, Mar 23, 2016 at 1:04 PM, Fabrice Bacchella
<fabrice.bacchella(a)orange.fr> wrote:
> I'm reading the documentation here :
> http://www.ovirt.org/documentation/admin-guide/serial-console-setup/
>
> After a few strace, I found the ssh configuration used for the custom ssh that listen
on port 2222:
>
/usr/share/ovirt-vmconsole/ovirt-vmconsole-proxy/ovirt-vmconsole-proxy-sshd/sshd_config
>
> And I have a big problem with it.
> It says "GSSAPIAuthentication no" but public key authentication is not
allowed in my data center, we use kerberos every where.
> So I wonder if I can edit this file ? How is it managed by ovirt ?
In general, things under /usr are only packaged, not "managed". So a
next upgrade will overwrite your changes.
Ok, so I just need to take care how modifications and upgrade are done (using puppet) and
everything should be fine.
Seems like both its systemd unit and sysv init script read
/etc/sysconfig/ovirt-vmconsole-proxy-sshd if it exists and add
${OPTIONS} to sshd's command line. So you can try to:
echo 'OPTIONS="-o GSSAPIAuthentication=yes"' >>
/etc/sysconfig/ovirt-vmconsole-proxy-sshd
I tried that. It works. I now have pure kerberos only problems. But that's a good
direction.
and restart it.
7:07 a.m.
On Wed, Mar 23, 2016 at 1:46 PM, Fabrice Bacchella
<fabrice.bacchella(a)orange.fr> wrote:
> Le 23 mars 2016 à 12:28, Yedidyah Bar David <didi(a)redhat.com> a écrit :
>
> On Wed, Mar 23, 2016 at 1:04 PM, Fabrice Bacchella
> <fabrice.bacchella(a)orange.fr> wrote:
>> I'm reading the documentation here :
>> http://www.ovirt.org/documentation/admin-guide/serial-console-setup/
>>
>> After a few strace, I found the ssh configuration used for the custom ssh that
listen on port 2222:
>>
/usr/share/ovirt-vmconsole/ovirt-vmconsole-proxy/ovirt-vmconsole-proxy-sshd/sshd_config
>>
>> And I have a big problem with it.
>> It says "GSSAPIAuthentication no" but public key authentication is not
allowed in my data center, we use kerberos every where.
>> So I wonder if I can edit this file ? How is it managed by ovirt ?
>
> In general, things under /usr are only packaged, not "managed". So a
> next upgrade will overwrite your changes.
Ok, so I just need to take care how modifications and upgrade are done (using puppet) and
everything should be fine.
But isn't the below enough?
>
> Seems like both its systemd unit and sysv init script read
> /etc/sysconfig/ovirt-vmconsole-proxy-sshd if it exists and add
> ${OPTIONS} to sshd's command line. So you can try to:
>
> echo 'OPTIONS="-o GSSAPIAuthentication=yes"' >>
> /etc/sysconfig/ovirt-vmconsole-proxy-sshd
>
>
I tried that. It works. I now have pure kerberos only problems. But that's a good
direction.
Good.
So that should be enough, no? IIRC command-line options override conf
file in sshd, no need to play games with rpm/yum.
Thanks for the report.
Best,
--
Didi
7:11 a.m.
Le 23 mars 2016 à 13:07, Yedidyah Bar David <didi(a)redhat.com> a
écrit :
On Wed, Mar 23, 2016 at 1:46 PM, Fabrice Bacchella
<fabrice.bacchella(a)orange.fr> wrote:
>
>> Le 23 mars 2016 à 12:28, Yedidyah Bar David <didi(a)redhat.com> a écrit :
>>
>> On Wed, Mar 23, 2016 at 1:04 PM, Fabrice Bacchella
>> <fabrice.bacchella(a)orange.fr> wrote:
>>> I'm reading the documentation here :
>>> http://www.ovirt.org/documentation/admin-guide/serial-console-setup/
>>>
>>> After a few strace, I found the ssh configuration used for the custom ssh
that listen on port 2222:
>>>
/usr/share/ovirt-vmconsole/ovirt-vmconsole-proxy/ovirt-vmconsole-proxy-sshd/sshd_config
>>>
>>> And I have a big problem with it.
>>> It says "GSSAPIAuthentication no" but public key authentication is
not allowed in my data center, we use kerberos every where.
>>> So I wonder if I can edit this file ? How is it managed by ovirt ?
>>
>> In general, things under /usr are only packaged, not "managed". So a
>> next upgrade will overwrite your changes.
>
> Ok, so I just need to take care how modifications and upgrade are done (using puppet)
and everything should be fine.
But isn't the below enough?
It is, but I need to add to many options, it will become clumsy. So I'm keeping it in
my mind.
11:28 a.m.
Hi,
I have a question on this.
Can there be multiple SSH keys in that box in the GUI?
For instance, we might have 2 keys for our “Admin” account?
Thanks for your help,
—
C
On 23 Mar 2016, at 12:46, Fabrice Bacchella
<fabrice.bacchella(a)orange.fr> wrote:
>
> Le 23 mars 2016 à 12:28, Yedidyah Bar David <didi(a)redhat.com> a écrit :
>
> On Wed, Mar 23, 2016 at 1:04 PM, Fabrice Bacchella
> <fabrice.bacchella(a)orange.fr> wrote:
>> I'm reading the documentation here :
>> http://www.ovirt.org/documentation/admin-guide/serial-console-setup/
>>
>> After a few strace, I found the ssh configuration used for the custom ssh that
listen on port 2222:
>>
/usr/share/ovirt-vmconsole/ovirt-vmconsole-proxy/ovirt-vmconsole-proxy-sshd/sshd_config
>>
>> And I have a big problem with it.
>> It says "GSSAPIAuthentication no" but public key authentication is not
allowed in my data center, we use kerberos every where.
>> So I wonder if I can edit this file ? How is it managed by ovirt ?
>
> In general, things under /usr are only packaged, not "managed". So a
> next upgrade will overwrite your changes.
Ok, so I just need to take care how modifications and upgrade are done (using puppet) and
everything should be fine.
>
> Seems like both its systemd unit and sysv init script read
> /etc/sysconfig/ovirt-vmconsole-proxy-sshd if it exists and add
> ${OPTIONS} to sshd's command line. So you can try to:
>
> echo 'OPTIONS="-o GSSAPIAuthentication=yes"' >>
> /etc/sysconfig/ovirt-vmconsole-proxy-sshd
>
>
I tried that. It works. I now have pure kerberos only problems. But that's a good
direction.
> and restart it.
>
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
1 a.m.
On Wed, Mar 30, 2016 at 7:28 PM, Christophe TREFOIS
<christophe.trefois(a)uni.lu> wrote:
Hi,
I have a question on this.
Can there be multiple SSH keys in that box in the GUI?
For instance, we might have 2 keys for our “Admin” account?
Not sure, Francesco?
Thanks for your help,
—
C
> On 23 Mar 2016, at 12:46, Fabrice Bacchella <fabrice.bacchella(a)orange.fr>
wrote:
>
>>
>> Le 23 mars 2016 à 12:28, Yedidyah Bar David <didi(a)redhat.com> a écrit :
>>
>> On Wed, Mar 23, 2016 at 1:04 PM, Fabrice Bacchella
>> <fabrice.bacchella(a)orange.fr> wrote:
>>> I'm reading the documentation here :
>>> http://www.ovirt.org/documentation/admin-guide/serial-console-setup/
>>>
>>> After a few strace, I found the ssh configuration used for the custom ssh
that listen on port 2222:
>>>
/usr/share/ovirt-vmconsole/ovirt-vmconsole-proxy/ovirt-vmconsole-proxy-sshd/sshd_config
>>>
>>> And I have a big problem with it.
>>> It says "GSSAPIAuthentication no" but public key authentication is
not allowed in my data center, we use kerberos every where.
>>> So I wonder if I can edit this file ? How is it managed by ovirt ?
>>
>> In general, things under /usr are only packaged, not "managed". So a
>> next upgrade will overwrite your changes.
>
> Ok, so I just need to take care how modifications and upgrade are done (using puppet)
and everything should be fine.
>>
>> Seems like both its systemd unit and sysv init script read
>> /etc/sysconfig/ovirt-vmconsole-proxy-sshd if it exists and add
>> ${OPTIONS} to sshd's command line. So you can try to:
>>
>> echo 'OPTIONS="-o GSSAPIAuthentication=yes"' >>
>> /etc/sysconfig/ovirt-vmconsole-proxy-sshd
>>
>>
>
> I tried that. It works. I now have pure kerberos only problems. But that's a good
direction.
>
>> and restart it.
>>
>
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
--
Didi
1:37 a.m.
----- Original Message -----
From: "Yedidyah Bar David" <didi(a)redhat.com>
To: "Christophe TREFOIS" <christophe.trefois(a)uni.lu>, "Francesco
Romani" <fromani(a)redhat.com>
Cc: "Fabrice Bacchella" <fabrice.bacchella(a)orange.fr>, "users"
<users(a)ovirt.org>
Sent: Thursday, March 31, 2016 8:00:04 AM
Subject: Re: [ovirt-users] seria consol setup
On Wed, Mar 30, 2016 at 7:28 PM, Christophe TREFOIS
<christophe.trefois(a)uni.lu> wrote:
> Hi,
>
> I have a question on this.
>
> Can there be multiple SSH keys in that box in the GUI?
>
> For instance, we might have 2 keys for our “Admin” account?
Not sure, Francesco?
Yes, you can paste multiple new-line separated public keys in the same box.
--
Francesco Romani
RedHat Engineering Virtualization R & D
Phone: 8261328
IRC: fromani
3161
days inactive
3169
days old
14 comments
4 participants
participants (4)
-
Christophe TREFOIS -
Fabrice Bacchella -
Francesco Romani -
Yedidyah Bar David