3:01 a.m.
Hi all,
today Feb 11th we have oVirt 3.4.0 beta 2 test day.
On this day all relevant engineers will be online ready to support
any issues you find during install / operating this new release.
Just make sure you have 1 hosts or more to test drive the new release.
If you're curious to see how it works, this is your chance.
Thanks again for everyone who will join us tomorrow!
Location
#ovirt irc channel
Please communicate here to allow others to see any issues
What
In this test day you have a license to kill ;)
Follow the documentation to setup your environment, and test drive the new features.
Please remember we expect to see some issues, and anything you come up with will save
a you when you'll install final release
Remember to try daily tasks you'd usually do in the engine, to see there are no
regressions.
Write down the configuration you used (HW, console, etc) in the report etherpad[1].
Documentation
Release notes: http://www.ovirt.org/OVirt_3.4.0_release_notes
Features pages links: http://bit.ly/17qBn6F
If you find errors in the wiki please annotate it as well in report etherpad [1]
Prerequisites / recommendations
Use CentOS or RHEL 6.5 only. 6.4 is unsupported due to various issues (sanlock,
libvirt, etc).
Use Fedora 19 only. Fedora 20 is unsupported for running the engine due to various
issues (sos, jboss) but may be used as hypervisor.
Latest RPMs
repository to be enabled for testing the release are listed in the release notes page
[2].
Note: on Fedora you'll need to enable fedora-virt-preview repository for getting
latest libvirt rpms.
Note: on EL6 you'll need to enable EPEL repository.
NEW issues / reports
For any new issue, please update the reports etherpad [1]
Feature owners, please make sure:
your feature is updated and referenced on release page [2].
you have testing instruction for your feature either on test day page [3] or in your
feature page.
your team regression testing section is organized and up to date on test day page
[3].
[1] http://etherpad.ovirt.org/p/3.4-testday-2
[2] http://www.ovirt.org/OVirt_3.4.0_release_notes
[3] http://www.ovirt.org/OVirt_3.4_Test_Day
Thanks.
--
Sandro Bonazzola
Better technology. Faster innovation. Powered by community collaboration.
See how it works at redhat.com
3:12 a.m.
Have the release notes been updated for beta 2? It's not immediately obvious from
reading the release notes that they are in reference to beta 2 and not beta 1. I ask
because some of the known issues here were present last test day.
Cheers,
Justin.
________________________________________
From: users-bounces(a)ovirt.org [users-bounces(a)ovirt.org] on behalf of Sandro Bonazzola
[sbonazzo(a)redhat.com]
Sent: Tuesday, 11 February 2014 6:01 PM
To: Users(a)ovirt.org
Subject: [Users] [ANN] oVirt 3.4.0 beta 2 Test Day - Today Feb 11th
Hi all,
today Feb 11th we have oVirt 3.4.0 beta 2 test day.
On this day all relevant engineers will be online ready to support
any issues you find during install / operating this new release.
Just make sure you have 1 hosts or more to test drive the new release.
If you're curious to see how it works, this is your chance.
Thanks again for everyone who will join us tomorrow!
Location
#ovirt irc channel
Please communicate here to allow others to see any issues
What
In this test day you have a license to kill ;)
Follow the documentation to setup your environment, and test drive the new features.
Please remember we expect to see some issues, and anything you come up with will save
a you when you'll install final release
Remember to try daily tasks you'd usually do in the engine, to see there are no
regressions.
Write down the configuration you used (HW, console, etc) in the report etherpad[1].
Documentation
Release notes: http://www.ovirt.org/OVirt_3.4.0_release_notes
Features pages links: http://bit.ly/17qBn6F
If you find errors in the wiki please annotate it as well in report etherpad [1]
Prerequisites / recommendations
Use CentOS or RHEL 6.5 only. 6.4 is unsupported due to various issues (sanlock,
libvirt, etc).
Use Fedora 19 only. Fedora 20 is unsupported for running the engine due to various
issues (sos, jboss) but may be used as hypervisor.
Latest RPMs
repository to be enabled for testing the release are listed in the release notes page
[2].
Note: on Fedora you'll need to enable fedora-virt-preview repository for getting
latest libvirt rpms.
Note: on EL6 you'll need to enable EPEL repository.
NEW issues / reports
For any new issue, please update the reports etherpad [1]
Feature owners, please make sure:
your feature is updated and referenced on release page [2].
you have testing instruction for your feature either on test day page [3] or in your
feature page.
your team regression testing section is organized and up to date on test day page
[3].
[1] http://etherpad.ovirt.org/p/3.4-testday-2
[2] http://www.ovirt.org/OVirt_3.4.0_release_notes
[3] http://www.ovirt.org/OVirt_3.4_Test_Day
Thanks.
--
Sandro Bonazzola
Better technology. Faster innovation. Powered by community collaboration.
See how it works at redhat.com
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
3:32 a.m.
Il 11/02/2014 09:12, Justin Clacherty ha scritto:
Have the release notes been updated for beta 2? It's not
immediately obvious from reading the release notes that they are in reference to beta 2
and not beta 1.
I've just updated release notes page to make it clear they reference second beta.
I ask because some of the known issues here were present last test
day.
Yes and sadly some of the known issues are not fixed yet.
Known issues
EL >= 6.5 or cloud-init >= 0.7.2 are needed for cloud-init feature support (BZ
1029885)
all-in-one requiures fedora-virt-preview repo as in the next item
For using Fedora 19 as node on 3.4 clusters you need to enable fedora-virt-preview
repository (BZ 1056918)
Node
Needs to be booted in permissive mode by appending: enforcing=0
engine-setup: upgrade from 3.3 overwrites exports with acl None (BZ 1058018)
Cheers,
Justin.
________________________________________
From: users-bounces(a)ovirt.org [users-bounces(a)ovirt.org] on behalf of Sandro Bonazzola
[sbonazzo(a)redhat.com]
Sent: Tuesday, 11 February 2014 6:01 PM
To: Users(a)ovirt.org
Subject: [Users] [ANN] oVirt 3.4.0 beta 2 Test Day - Today Feb 11th
Hi all,
today Feb 11th we have oVirt 3.4.0 beta 2 test day.
On this day all relevant engineers will be online ready to support
any issues you find during install / operating this new release.
Just make sure you have 1 hosts or more to test drive the new release.
If you're curious to see how it works, this is your chance.
Thanks again for everyone who will join us tomorrow!
Location
#ovirt irc channel
Please communicate here to allow others to see any issues
What
In this test day you have a license to kill ;)
Follow the documentation to setup your environment, and test drive the new features.
Please remember we expect to see some issues, and anything you come up with will save
a you when you'll install final release
Remember to try daily tasks you'd usually do in the engine, to see there are no
regressions.
Write down the configuration you used (HW, console, etc) in the report etherpad[1].
Documentation
Release notes: http://www.ovirt.org/OVirt_3.4.0_release_notes
Features pages links: http://bit.ly/17qBn6F
If you find errors in the wiki please annotate it as well in report etherpad [1]
Prerequisites / recommendations
Use CentOS or RHEL 6.5 only. 6.4 is unsupported due to various issues (sanlock,
libvirt, etc).
Use Fedora 19 only. Fedora 20 is unsupported for running the engine due to various
issues (sos, jboss) but may be used as hypervisor.
Latest RPMs
repository to be enabled for testing the release are listed in the release notes page
[2].
Note: on Fedora you'll need to enable fedora-virt-preview repository for getting
latest libvirt rpms.
Note: on EL6 you'll need to enable EPEL repository.
NEW issues / reports
For any new issue, please update the reports etherpad [1]
Feature owners, please make sure:
your feature is updated and referenced on release page [2].
you have testing instruction for your feature either on test day page [3] or in your
feature page.
your team regression testing section is organized and up to date on test day page
[3].
[1] http://etherpad.ovirt.org/p/3.4-testday-2
[2] http://www.ovirt.org/OVirt_3.4.0_release_notes
[3] http://www.ovirt.org/OVirt_3.4_Test_Day
Thanks.
--
Sandro Bonazzola
Better technology. Faster innovation. Powered by community collaboration.
See how it works at redhat.com
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
--
Sandro Bonazzola
Better technology. Faster innovation. Powered by community collaboration.
See how it works at redhat.com
5:07 a.m.
The link to the Node ISO on http://www.ovirt.org/OVirt_3.4_TestDay is down. Do you have
the correct link?
-----Original Message-----
From: Sandro Bonazzola [mailto:sbonazzo@redhat.com]
Sent: Tuesday, 11 February 2014 6:33 PM
To: Justin Clacherty; Users(a)ovirt.org
Subject: Re: [Users] [ANN] oVirt 3.4.0 beta 2 Test Day - Today Feb 11th
Il 11/02/2014 09:12, Justin Clacherty ha scritto:
Have the release notes been updated for beta 2? It's not
immediately obvious from reading the release notes that they are in reference to beta 2
and not beta 1.
I've just updated release notes page to make it clear they reference second beta.
I ask because some of the known issues here were present last test
day.
Yes and sadly some of the known issues are not fixed yet.
Known issues
EL >= 6.5 or cloud-init >= 0.7.2 are needed for cloud-init feature support (BZ
1029885)
all-in-one requiures fedora-virt-preview repo as in the next item
For using Fedora 19 as node on 3.4 clusters you need to enable fedora-virt-preview
repository (BZ 1056918)
Node
Needs to be booted in permissive mode by appending: enforcing=0
engine-setup: upgrade from 3.3 overwrites exports with acl None (BZ 1058018)
Cheers,
Justin.
________________________________________
From: users-bounces(a)ovirt.org [users-bounces(a)ovirt.org] on behalf of
Sandro Bonazzola [sbonazzo(a)redhat.com]
Sent: Tuesday, 11 February 2014 6:01 PM
To: Users(a)ovirt.org
Subject: [Users] [ANN] oVirt 3.4.0 beta 2 Test Day - Today Feb 11th
Hi all,
today Feb 11th we have oVirt 3.4.0 beta 2 test day.
On this day all relevant engineers will be online ready to support any
issues you find during install / operating this new release.
Just make sure you have 1 hosts or more to test drive the new release.
If you're curious to see how it works, this is your chance.
Thanks again for everyone who will join us tomorrow!
Location
#ovirt irc channel
Please communicate here to allow others to see any issues
What
In this test day you have a license to kill ;)
Follow the documentation to setup your environment, and test drive the new features.
Please remember we expect to see some issues, and anything you come up with will save
a you when you'll install final release
Remember to try daily tasks you'd usually do in the engine, to see there are no
regressions.
Write down the configuration you used (HW, console, etc) in the report etherpad[1].
Documentation
Release notes: http://www.ovirt.org/OVirt_3.4.0_release_notes
Features pages links: http://bit.ly/17qBn6F
If you find errors in the wiki please annotate it as well in
report etherpad [1]
Prerequisites / recommendations
Use CentOS or RHEL 6.5 only. 6.4 is unsupported due to various issues (sanlock,
libvirt, etc).
Use Fedora 19 only. Fedora 20 is unsupported for running the engine due to various
issues (sos, jboss) but may be used as hypervisor.
Latest RPMs
repository to be enabled for testing the release are listed in the release notes page
[2].
Note: on Fedora you'll need to enable fedora-virt-preview repository for getting
latest libvirt rpms.
Note: on EL6 you'll need to enable EPEL repository.
NEW issues / reports
For any new issue, please update the reports etherpad [1]
Feature owners, please make sure:
your feature is updated and referenced on release page [2].
you have testing instruction for your feature either on test day page [3] or in your
feature page.
your team regression testing section is organized and up to date on test day page
[3].
[1] http://etherpad.ovirt.org/p/3.4-testday-2
[2] http://www.ovirt.org/OVirt_3.4.0_release_notes
[3] http://www.ovirt.org/OVirt_3.4_Test_Day
Thanks.
--
Sandro Bonazzola
Better technology. Faster innovation. Powered by community collaboration.
See how it works at redhat.com
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
--
Sandro Bonazzola
Better technology. Faster innovation. Powered by community collaboration.
See how it works at redhat.com
5:15 a.m.
Il 11/02/2014 11:07, Justin Clacherty ha scritto:
The link to the Node ISO on http://www.ovirt.org/OVirt_3.4_TestDay is
down. Do you have the correct link?
Updated with latest available Node ISO.
Fabian, if you're going to resping it please announce it here and update test day
page.
-----Original Message-----
From: Sandro Bonazzola [mailto:sbonazzo@redhat.com]
Sent: Tuesday, 11 February 2014 6:33 PM
To: Justin Clacherty; Users(a)ovirt.org
Subject: Re: [Users] [ANN] oVirt 3.4.0 beta 2 Test Day - Today Feb 11th
Il 11/02/2014 09:12, Justin Clacherty ha scritto:
> Have the release notes been updated for beta 2? It's not immediately obvious
from reading the release notes that they are in reference to beta 2 and not beta 1.
I've just updated release notes page to make it clear they reference second beta.
> I ask because some of the known issues here were present last test day.
Yes and sadly some of the known issues are not fixed yet.
Known issues
EL >= 6.5 or cloud-init >= 0.7.2 are needed for cloud-init feature support (BZ
1029885)
all-in-one requiures fedora-virt-preview repo as in the next item
For using Fedora 19 as node on 3.4 clusters you need to enable fedora-virt-preview
repository (BZ 1056918)
Node
Needs to be booted in permissive mode by appending: enforcing=0
engine-setup: upgrade from 3.3 overwrites exports with acl None (BZ 1058018)
>
> Cheers,
> Justin.
>
> ________________________________________
> From: users-bounces(a)ovirt.org [users-bounces(a)ovirt.org] on behalf of
> Sandro Bonazzola [sbonazzo(a)redhat.com]
> Sent: Tuesday, 11 February 2014 6:01 PM
> To: Users(a)ovirt.org
> Subject: [Users] [ANN] oVirt 3.4.0 beta 2 Test Day - Today Feb 11th
>
> Hi all,
> today Feb 11th we have oVirt 3.4.0 beta 2 test day.
>
> On this day all relevant engineers will be online ready to support any
> issues you find during install / operating this new release.
>
> Just make sure you have 1 hosts or more to test drive the new release.
> If you're curious to see how it works, this is your chance.
>
> Thanks again for everyone who will join us tomorrow!
>
> Location
> #ovirt irc channel
> Please communicate here to allow others to see any issues
>
> What
> In this test day you have a license to kill ;)
> Follow the documentation to setup your environment, and test drive the new
features.
> Please remember we expect to see some issues, and anything you come up with will
save a you when you'll install final release
> Remember to try daily tasks you'd usually do in the engine, to see there are
no regressions.
> Write down the configuration you used (HW, console, etc) in the report
etherpad[1].
>
> Documentation
> Release notes: http://www.ovirt.org/OVirt_3.4.0_release_notes
> Features pages links: http://bit.ly/17qBn6F
> If you find errors in the wiki please annotate it as well in
> report etherpad [1]
>
> Prerequisites / recommendations
> Use CentOS or RHEL 6.5 only. 6.4 is unsupported due to various issues (sanlock,
libvirt, etc).
> Use Fedora 19 only. Fedora 20 is unsupported for running the engine due to
various issues (sos, jboss) but may be used as hypervisor.
>
>
> Latest RPMs
> repository to be enabled for testing the release are listed in the release notes
page [2].
> Note: on Fedora you'll need to enable fedora-virt-preview repository for
getting latest libvirt rpms.
> Note: on EL6 you'll need to enable EPEL repository.
>
> NEW issues / reports
> For any new issue, please update the reports etherpad [1]
>
> Feature owners, please make sure:
> your feature is updated and referenced on release page [2].
> you have testing instruction for your feature either on test day page [3] or in
your feature page.
> your team regression testing section is organized and up to date on test day page
[3].
>
>
> [1] http://etherpad.ovirt.org/p/3.4-testday-2
> [2] http://www.ovirt.org/OVirt_3.4.0_release_notes
> [3] http://www.ovirt.org/OVirt_3.4_Test_Day
>
>
> Thanks.
> --
> Sandro Bonazzola
> Better technology. Faster innovation. Powered by community collaboration.
> See how it works at redhat.com
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
--
Sandro Bonazzola
Better technology. Faster innovation. Powered by community collaboration.
See how it works at redhat.com
--
Sandro Bonazzola
Better technology. Faster innovation. Powered by community collaboration.
See how it works at redhat.com
6:14 a.m.
Apologies for top posting. Stuck on Outlook here.
I've set up a node with that ISO and it complains about compatibility.
"Host node1 is compatible with versions (3.0,3.1,3.2,3.3) and cannot join Cluster
Default which is set to version 3.4"
-----Original Message-----
From: Sandro Bonazzola [mailto:sbonazzo@redhat.com]
Sent: Tuesday, 11 February 2014 8:16 PM
To: Justin Clacherty; Users(a)ovirt.org; Fabian Deutsch
Subject: Re: [Users] [ANN] oVirt 3.4.0 beta 2 Test Day - Today Feb 11th
Il 11/02/2014 11:07, Justin Clacherty ha scritto:
The link to the Node ISO on http://www.ovirt.org/OVirt_3.4_TestDay is
down. Do you have the correct link?
Updated with latest available Node ISO.
Fabian, if you're going to resping it please announce it here and update test day
page.
11:16 a.m.
Me too.
----- Original Message -----
From: "Justin Clacherty" <justin(a)redfish.com.au>
To: "Sandro Bonazzola" <sbonazzo(a)redhat.com>, Users(a)ovirt.org,
"Fabian Deutsch" <fabiand(a)redhat.com>
Sent: Tuesday, February 11, 2014 6:14:26 AM
Subject: Re: [Users] [ANN] oVirt 3.4.0 beta 2 Test Day - Today Feb 11th
Apologies for top posting. Stuck on Outlook here.
I've set up a node with that ISO and it complains about compatibility.
"Host node1 is compatible with versions (3.0,3.1,3.2,3.3) and cannot join
Cluster Default which is set to version 3.4"
-----Original Message-----
From: Sandro Bonazzola [mailto:sbonazzo@redhat.com]
Sent: Tuesday, 11 February 2014 8:16 PM
To: Justin Clacherty; Users(a)ovirt.org; Fabian Deutsch
Subject: Re: [Users] [ANN] oVirt 3.4.0 beta 2 Test Day - Today Feb 11th
Il 11/02/2014 11:07, Justin Clacherty ha scritto:
> The link to the Node ISO on http://www.ovirt.org/OVirt_3.4_TestDay is down.
> Do you have the correct link?
Updated with latest available Node ISO.
Fabian, if you're going to resping it please announce it here and update test
day page.
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
12:19 p.m.
--=-roTDFG2Pp3EAzzCjAn3f
Content-Type: text/plain; charset="UTF-8"
Content-Transfer-Encoding: quoted-printable
Am Dienstag, den 11.02.2014, 11:16 -0500 schrieb Greg Sheremeta:
Me too.
For 3.4 please try this iso:
http://fedorapeople.org/~fabiand/node/3.0.4/ovirt-node-iso-3.0.4-1.0.201401=
291204.vdsm34.el6.iso
- fabian
----- Original Message -----
> From: "Justin Clacherty" <justin(a)redfish.com.au>
> To: "Sandro Bonazzola" <sbonazzo(a)redhat.com>, Users(a)ovirt.org,
"Fabian =
Deutsch" <fabiand(a)redhat.com>
> Sent: Tuesday, February 11, 2014 6:14:26 AM
> Subject: Re: [Users] [ANN] oVirt 3.4.0 beta 2 Test Day - Today Feb 11th
>=20
> Apologies for top posting. Stuck on Outlook here.
>=20
> I've set up a node with that ISO and it complains about compatibility.
>=20
> "Host node1 is compatible with versions (3.0,3.1,3.2,3.3) and cannot jo=
in
> Cluster Default which is set to version 3.4"
>=20
> -----Original Message-----
> From: Sandro Bonazzola [mailto:sbonazzo@redhat.com]
> Sent: Tuesday, 11 February 2014 8:16 PM
> To: Justin Clacherty; Users(a)ovirt.org; Fabian Deutsch
> Subject: Re: [Users] [ANN] oVirt 3.4.0 beta 2 Test Day - Today Feb 11th
>=20
> Il 11/02/2014 11:07, Justin Clacherty ha scritto:
> > The link to the Node ISO on http://www.ovirt.org/OVirt_3.4_TestDay is=
down.
> > Do you have the correct link?
>=20
> Updated with latest available Node ISO.
> Fabian, if you're going to resping it please announce it here and updat=
e
test
> day page.
>=20
>=20
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>=20
--=-roTDFG2Pp3EAzzCjAn3f
Content-Type: application/pgp-signature; name="signature.asc"
Content-Description: This is a digitally signed message part
Content-Transfer-Encoding: 7bit
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)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=7u1Y
-----END PGP SIGNATURE-----
--=-roTDFG2Pp3EAzzCjAn3f--
2:06 p.m.
----- Original Message -----
From: "Fabian Deutsch" <fabiand(a)redhat.com>
To: "Greg Sheremeta" <gshereme(a)redhat.com>
Cc: "Justin Clacherty" <justin(a)redfish.com.au>, "Sandro
Bonazzola" <sbonazzo(a)redhat.com>, Users(a)ovirt.org
Sent: Tuesday, February 11, 2014 12:19:49 PM
Subject: Re: [Users] [ANN] oVirt 3.4.0 beta 2 Test Day - Today Feb 11th
Am Dienstag, den 11.02.2014, 11:16 -0500 schrieb Greg Sheremeta:
> Me too.
For 3.4 please try this iso:
http://fedorapeople.org/~fabiand/node/3.0.4/ovirt-node-iso-3.0.4-1.0.2014...
- fabian
I've never actually tried node. i always just initiate the host install from engine.
Is one preferred over the other for test day?
Greg
> ----- Original Message -----
> > From: "Justin Clacherty" <justin(a)redfish.com.au>
> > To: "Sandro Bonazzola" <sbonazzo(a)redhat.com>, Users(a)ovirt.org,
"Fabian
> > Deutsch" <fabiand(a)redhat.com>
> > Sent: Tuesday, February 11, 2014 6:14:26 AM
> > Subject: Re: [Users] [ANN] oVirt 3.4.0 beta 2 Test Day - Today Feb 11th
> >
> > Apologies for top posting. Stuck on Outlook here.
> >
> > I've set up a node with that ISO and it complains about compatibility.
> >
> > "Host node1 is compatible with versions (3.0,3.1,3.2,3.3) and cannot join
> > Cluster Default which is set to version 3.4"
> >
> > -----Original Message-----
> > From: Sandro Bonazzola [mailto:sbonazzo@redhat.com]
> > Sent: Tuesday, 11 February 2014 8:16 PM
> > To: Justin Clacherty; Users(a)ovirt.org; Fabian Deutsch
> > Subject: Re: [Users] [ANN] oVirt 3.4.0 beta 2 Test Day - Today Feb 11th
> >
> > Il 11/02/2014 11:07, Justin Clacherty ha scritto:
> > > The link to the Node ISO on http://www.ovirt.org/OVirt_3.4_TestDay is
> > > down.
> > > Do you have the correct link?
> >
> > Updated with latest available Node ISO.
> > Fabian, if you're going to resping it please announce it here and update
> > test
> > day page.
> >
> >
> > _______________________________________________
> > Users mailing list
> > Users(a)ovirt.org
> > http://lists.ovirt.org/mailman/listinfo/users
> >
9:13 a.m.
--=-HSt4WJiBe961f3mEg9Km
Content-Type: text/plain; charset="UTF-8"
Content-Transfer-Encoding: quoted-printable
Am Dienstag, den 11.02.2014, 14:06 -0500 schrieb Greg Sheremeta:
=20
----- Original Message -----
> From: "Fabian Deutsch" <fabiand(a)redhat.com>
> To: "Greg Sheremeta" <gshereme(a)redhat.com>
> Cc: "Justin Clacherty" <justin(a)redfish.com.au>, "Sandro
Bonazzola" <sbo=
nazzo(a)redhat.com>, Users(a)ovirt.org
> Sent: Tuesday, February 11, 2014 12:19:49 PM
> Subject: Re: [Users] [ANN] oVirt 3.4.0 beta 2 Test Day - Today Feb 11th
>=20
> Am Dienstag, den 11.02.2014, 11:16 -0500 schrieb Greg Sheremeta:
> > Me too.
>=20
> For 3.4 please try this iso:
> http://fedorapeople.org/~fabiand/node/3.0.4/ovirt-node-iso-3.0.4-1.0.20=
1401291204.vdsm34.el6.iso
>=20
> - fabian
=20
I've never actually tried node. i always just initiate the host install f=
rom
engine.
=20
Is one preferred over the other for test day?
Hey Greg,
Node is different, it's main focus is on stability and ease of
maintenance. It is delivered in image form an can be installed using
PXE, or an USB media.
It is an alternative to using a full blown host.
And you are also free to use it on the testday :)
- fabian
Greg
=20
>=20
> > ----- Original Message -----
> > > From: "Justin Clacherty" <justin(a)redfish.com.au>
> > > To: "Sandro Bonazzola" <sbonazzo(a)redhat.com>,
Users(a)ovirt.org, "Fab=
ian
> > > Deutsch" <fabiand(a)redhat.com>
> > > Sent: Tuesday, February 11, 2014 6:14:26 AM
> > > Subject: Re: [Users] [ANN] oVirt 3.4.0 beta 2 Test Day - Today Feb =
11th
> > >=20
> > > Apologies for top posting. Stuck on Outlook here.
> > >=20
> > > I've set up a node with that ISO and it complains about compatibili=
ty.
> > >=20
> > > "Host node1 is compatible with versions (3.0,3.1,3.2,3.3) and canno=
t join
> > > Cluster Default which is set to version 3.4"
> > >=20
> > > -----Original Message-----
> > > From: Sandro Bonazzola [mailto:sbonazzo@redhat.com]
> > > Sent: Tuesday, 11 February 2014 8:16 PM
> > > To: Justin Clacherty; Users(a)ovirt.org; Fabian Deutsch
> > > Subject: Re: [Users] [ANN] oVirt 3.4.0 beta 2 Test Day - Today Feb =
11th
> > >=20
> > > Il 11/02/2014 11:07, Justin Clacherty ha scritto:
> > > > The link to the Node ISO on http://www.ovirt.org/OVirt_3.4_TestDa=
y is
> > > > down.
> > > > Do you have the correct link?
> > >=20
> > > Updated with latest available Node ISO.
> > > Fabian, if you're going to resping it please announce it here and u=
pdate
> > > test
> > > day page.
> > >=20
> > >=20
> > > _______________________________________________
> > > Users mailing list
> > > Users(a)ovirt.org
> > > http://lists.ovirt.org/mailman/listinfo/users
> > >=20
>=20
>=20
--=-HSt4WJiBe961f3mEg9Km
Content-Type: application/pgp-signature; name="signature.asc"
Content-Description: This is a digitally signed message part
Content-Transfer-Encoding: 7bit
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)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=qGYs
-----END PGP SIGNATURE-----
--=-HSt4WJiBe961f3mEg9Km--
11:59 a.m.
----- Original Message -----
From: "Fabian Deutsch" <fabiand(a)redhat.com>
To: "Greg Sheremeta" <gshereme(a)redhat.com>
Cc: "Justin Clacherty" <justin(a)redfish.com.au>, "Sandro
Bonazzola" <sbonazzo(a)redhat.com>, Users(a)ovirt.org
Sent: Wednesday, February 12, 2014 9:13:53 AM
Subject: Re: [Users] [ANN] oVirt 3.4.0 beta 2 Test Day - Today Feb 11th
Am Dienstag, den 11.02.2014, 14:06 -0500 schrieb Greg Sheremeta:
>
> ----- Original Message -----
> > From: "Fabian Deutsch" <fabiand(a)redhat.com>
> > To: "Greg Sheremeta" <gshereme(a)redhat.com>
> > Cc: "Justin Clacherty" <justin(a)redfish.com.au>, "Sandro
Bonazzola"
> > <sbonazzo(a)redhat.com>, Users(a)ovirt.org
> > Sent: Tuesday, February 11, 2014 12:19:49 PM
> > Subject: Re: [Users] [ANN] oVirt 3.4.0 beta 2 Test Day - Today Feb 11th
> >
> > Am Dienstag, den 11.02.2014, 11:16 -0500 schrieb Greg Sheremeta:
> > > Me too.
> >
> > For 3.4 please try this iso:
> >
http://fedorapeople.org/~fabiand/node/3.0.4/ovirt-node-iso-3.0.4-1.0.2014...
> >
> > - fabian
>
> I've never actually tried node. i always just initiate the host install
> from engine.
>
> Is one preferred over the other for test day?
Hey Greg,
Node is different, it's main focus is on stability and ease of
maintenance. It is delivered in image form an can be installed using
PXE, or an USB media.
It is an alternative to using a full blown host.
And you are also free to use it on the testday :)
If it's generally faster to get Node up vs. a engine-initiated host, I think I'll
def try it next time. Thanks :)
- fabian
> Greg
>
> >
> > > ----- Original Message -----
> > > > From: "Justin Clacherty" <justin(a)redfish.com.au>
> > > > To: "Sandro Bonazzola" <sbonazzo(a)redhat.com>,
Users(a)ovirt.org,
> > > > "Fabian
> > > > Deutsch" <fabiand(a)redhat.com>
> > > > Sent: Tuesday, February 11, 2014 6:14:26 AM
> > > > Subject: Re: [Users] [ANN] oVirt 3.4.0 beta 2 Test Day - Today Feb
> > > > 11th
> > > >
> > > > Apologies for top posting. Stuck on Outlook here.
> > > >
> > > > I've set up a node with that ISO and it complains about
> > > > compatibility.
> > > >
> > > > "Host node1 is compatible with versions (3.0,3.1,3.2,3.3) and
cannot
> > > > join
> > > > Cluster Default which is set to version 3.4"
> > > >
> > > > -----Original Message-----
> > > > From: Sandro Bonazzola [mailto:sbonazzo@redhat.com]
> > > > Sent: Tuesday, 11 February 2014 8:16 PM
> > > > To: Justin Clacherty; Users(a)ovirt.org; Fabian Deutsch
> > > > Subject: Re: [Users] [ANN] oVirt 3.4.0 beta 2 Test Day - Today Feb
> > > > 11th
> > > >
> > > > Il 11/02/2014 11:07, Justin Clacherty ha scritto:
> > > > > The link to the Node ISO on
http://www.ovirt.org/OVirt_3.4_TestDay
> > > > > is
> > > > > down.
> > > > > Do you have the correct link?
> > > >
> > > > Updated with latest available Node ISO.
> > > > Fabian, if you're going to resping it please announce it here
and
> > > > update
> > > > test
> > > > day page.
> > > >
> > > >
> > > > _______________________________________________
> > > > Users mailing list
> > > > Users(a)ovirt.org
> > > > http://lists.ovirt.org/mailman/listinfo/users
> > > >
> >
> >
12:02 p.m.
--=-kvJSi2epMlJ1nV8EaI+O
Content-Type: text/plain; charset="UTF-8"
Content-Transfer-Encoding: quoted-printable
Am Mittwoch, den 12.02.2014, 11:59 -0500 schrieb Greg Sheremeta:
=20
----- Original Message -----
> From: "Fabian Deutsch" <fabiand(a)redhat.com>
> To: "Greg Sheremeta" <gshereme(a)redhat.com>
> Cc: "Justin Clacherty" <justin(a)redfish.com.au>, "Sandro
Bonazzola" <sbo=
nazzo(a)redhat.com>, Users(a)ovirt.org
> Sent: Wednesday, February 12, 2014 9:13:53 AM
> Subject: Re: [Users] [ANN] oVirt 3.4.0 beta 2 Test Day - Today Feb 11th
>=20
> Am Dienstag, den 11.02.2014, 14:06 -0500 schrieb Greg Sheremeta:
> >=20
> > ----- Original Message -----
> > > From: "Fabian Deutsch" <fabiand(a)redhat.com>
> > > To: "Greg Sheremeta" <gshereme(a)redhat.com>
> > > Cc: "Justin Clacherty" <justin(a)redfish.com.au>,
"Sandro Bonazzola"
> > > <sbonazzo(a)redhat.com>, Users(a)ovirt.org
> > > Sent: Tuesday, February 11, 2014 12:19:49 PM
> > > Subject: Re: [Users] [ANN] oVirt 3.4.0 beta 2 Test Day - Today Feb =
11th
> > >=20
> > > Am Dienstag, den 11.02.2014, 11:16 -0500 schrieb Greg Sheremeta:
> > > > Me too.
> > >=20
> > > For 3.4 please try this iso:
> > > http://fedorapeople.org/~fabiand/node/3.0.4/ovirt-node-iso-3.0.4-1.=
0.201401291204.vdsm34.el6.iso
> > >=20
> > > - fabian
> >=20
> > I've never actually tried node. i always just initiate the host insta=
ll
> > from engine.
> >=20
> > Is one preferred over the other for test day?
>=20
> Hey Greg,
>=20
> Node is different, it's main focus is on stability and ease of
> maintenance. It is delivered in image form an can be installed using
> PXE, or an USB media.
>=20
> It is an alternative to using a full blown host.
> And you are also free to use it on the testday :)
>=20
=20
If it's generally faster to get Node up vs. a engine-initiated host, I th=
ink
I'll def try it next time. Thanks :)
Yeah - that's also true :)
Did you try out Node with oVirt 3.4?
- fabian
=20
> - fabian
>=20
> > Greg
> >=20
> > >=20
> > > > ----- Original Message -----
> > > > > From: "Justin Clacherty"
<justin(a)redfish.com.au>
> > > > > To: "Sandro Bonazzola" <sbonazzo(a)redhat.com>,
Users(a)ovirt.org,
> > > > > "Fabian
> > > > > Deutsch" <fabiand(a)redhat.com>
> > > > > Sent: Tuesday, February 11, 2014 6:14:26 AM
> > > > > Subject: Re: [Users] [ANN] oVirt 3.4.0 beta 2 Test Day - Today =
Feb
> > > > > 11th
> > > > >=20
> > > > > Apologies for top posting. Stuck on Outlook here.
> > > > >=20
> > > > > I've set up a node with that ISO and it complains about
> > > > > compatibility.
> > > > >=20
> > > > > "Host node1 is compatible with versions (3.0,3.1,3.2,3.3)
and c=
annot
> > > > > join
> > > > > Cluster Default which is set to version 3.4"
> > > > >=20
> > > > > -----Original Message-----
> > > > > From: Sandro Bonazzola [mailto:sbonazzo@redhat.com]
> > > > > Sent: Tuesday, 11 February 2014 8:16 PM
> > > > > To: Justin Clacherty; Users(a)ovirt.org; Fabian Deutsch
> > > > > Subject: Re: [Users] [ANN] oVirt 3.4.0 beta 2 Test Day - Today =
Feb
> > > > > 11th
> > > > >=20
> > > > > Il 11/02/2014 11:07, Justin Clacherty ha scritto:
> > > > > > The link to the Node ISO on
http://www.ovirt.org/OVirt_3.4_Te=
stDay
> > > > > > is
> > > > > > down.
> > > > > > Do you have the correct link?
> > > > >=20
> > > > > Updated with latest available Node ISO.
> > > > > Fabian, if you're going to resping it please announce it
here a=
nd
> > > > > update
> > > > > test
> > > > > day page.
> > > > >=20
> > > > >=20
> > > > > _______________________________________________
> > > > > Users mailing list
> > > > > Users(a)ovirt.org
> > > > > http://lists.ovirt.org/mailman/listinfo/users
> > > > >=20
> > >=20
> > >=20
>=20
>=20
--=-kvJSi2epMlJ1nV8EaI+O
Content-Type: application/pgp-signature; name="signature.asc"
Content-Description: This is a digitally signed message part
Content-Transfer-Encoding: 7bit
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)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=V5h5
-----END PGP SIGNATURE-----
--=-kvJSi2epMlJ1nV8EaI+O--
12:09 p.m.
----- Original Message -----
From: "Fabian Deutsch" <fabiand(a)redhat.com>
To: "Greg Sheremeta" <gshereme(a)redhat.com>
Cc: "Justin Clacherty" <justin(a)redfish.com.au>, "Sandro
Bonazzola" <sbonazzo(a)redhat.com>, Users(a)ovirt.org
Sent: Wednesday, February 12, 2014 12:02:21 PM
Subject: Re: [Users] [ANN] oVirt 3.4.0 beta 2 Test Day - Today Feb 11th
Am Mittwoch, den 12.02.2014, 11:59 -0500 schrieb Greg Sheremeta:
>
> ----- Original Message -----
> > From: "Fabian Deutsch" <fabiand(a)redhat.com>
> > To: "Greg Sheremeta" <gshereme(a)redhat.com>
> > Cc: "Justin Clacherty" <justin(a)redfish.com.au>, "Sandro
Bonazzola"
> > <sbonazzo(a)redhat.com>, Users(a)ovirt.org
> > Sent: Wednesday, February 12, 2014 9:13:53 AM
> > Subject: Re: [Users] [ANN] oVirt 3.4.0 beta 2 Test Day - Today Feb 11th
> >
> > Am Dienstag, den 11.02.2014, 14:06 -0500 schrieb Greg Sheremeta:
> > >
> > > ----- Original Message -----
> > > > From: "Fabian Deutsch" <fabiand(a)redhat.com>
> > > > To: "Greg Sheremeta" <gshereme(a)redhat.com>
> > > > Cc: "Justin Clacherty" <justin(a)redfish.com.au>,
"Sandro Bonazzola"
> > > > <sbonazzo(a)redhat.com>, Users(a)ovirt.org
> > > > Sent: Tuesday, February 11, 2014 12:19:49 PM
> > > > Subject: Re: [Users] [ANN] oVirt 3.4.0 beta 2 Test Day - Today Feb
> > > > 11th
> > > >
> > > > Am Dienstag, den 11.02.2014, 11:16 -0500 schrieb Greg Sheremeta:
> > > > > Me too.
> > > >
> > > > For 3.4 please try this iso:
> > > >
http://fedorapeople.org/~fabiand/node/3.0.4/ovirt-node-iso-3.0.4-1.0.2014...
> > > >
> > > > - fabian
> > >
> > > I've never actually tried node. i always just initiate the host
install
> > > from engine.
> > >
> > > Is one preferred over the other for test day?
> >
> > Hey Greg,
> >
> > Node is different, it's main focus is on stability and ease of
> > maintenance. It is delivered in image form an can be installed using
> > PXE, or an USB media.
> >
> > It is an alternative to using a full blown host.
> > And you are also free to use it on the testday :)
> >
>
> If it's generally faster to get Node up vs. a engine-initiated host, I
> think I'll def try it next time. Thanks :)
Yeah - that's also true :)
Did you try out Node with oVirt 3.4?
- fabian
Nope, never tried Node at all, but next time I do an install, I'll be giving it a
try.
>
> > - fabian
> >
> > > Greg
> > >
> > > >
> > > > > ----- Original Message -----
> > > > > > From: "Justin Clacherty"
<justin(a)redfish.com.au>
> > > > > > To: "Sandro Bonazzola"
<sbonazzo(a)redhat.com>, Users(a)ovirt.org,
> > > > > > "Fabian
> > > > > > Deutsch" <fabiand(a)redhat.com>
> > > > > > Sent: Tuesday, February 11, 2014 6:14:26 AM
> > > > > > Subject: Re: [Users] [ANN] oVirt 3.4.0 beta 2 Test Day -
Today
> > > > > > Feb
> > > > > > 11th
> > > > > >
> > > > > > Apologies for top posting. Stuck on Outlook here.
> > > > > >
> > > > > > I've set up a node with that ISO and it complains
about
> > > > > > compatibility.
> > > > > >
> > > > > > "Host node1 is compatible with versions
(3.0,3.1,3.2,3.3) and
> > > > > > cannot
> > > > > > join
> > > > > > Cluster Default which is set to version 3.4"
> > > > > >
> > > > > > -----Original Message-----
> > > > > > From: Sandro Bonazzola [mailto:sbonazzo@redhat.com]
> > > > > > Sent: Tuesday, 11 February 2014 8:16 PM
> > > > > > To: Justin Clacherty; Users(a)ovirt.org; Fabian Deutsch
> > > > > > Subject: Re: [Users] [ANN] oVirt 3.4.0 beta 2 Test Day -
Today
> > > > > > Feb
> > > > > > 11th
> > > > > >
> > > > > > Il 11/02/2014 11:07, Justin Clacherty ha scritto:
> > > > > > > The link to the Node ISO on
> > > > > > > http://www.ovirt.org/OVirt_3.4_TestDay
> > > > > > > is
> > > > > > > down.
> > > > > > > Do you have the correct link?
> > > > > >
> > > > > > Updated with latest available Node ISO.
> > > > > > Fabian, if you're going to resping it please announce
it here and
> > > > > > update
> > > > > > test
> > > > > > day page.
> > > > > >
> > > > > >
> > > > > > _______________________________________________
> > > > > > Users mailing list
> > > > > > Users(a)ovirt.org
> > > > > > http://lists.ovirt.org/mailman/listinfo/users
> > > > > >
> > > >
> > > >
> >
> >
6:37 p.m.
-----Original Message-----
From: Fabian Deutsch [mailto:fabiand@redhat.com]
Sent: Thursday, 13 February 2014 3:02 AM
>
> If it's generally faster to get Node up vs. a engine-initiated host, I
> think I'll def try it next time. Thanks :)
Yeah - that's also true :)
Did you try out Node with oVirt 3.4?
I have and had some trouble.
All installed fine and the node came up in the web UI fine (I set enforcing to 0 on the
Linux command line as instructed on the Test Day page). I then ssh'd to the box to
change selinux to permissive mode so I could reboot without being at the console. After
rebooting the node it no longer appeared in the web UI. Not sure if this is an engine,
node, or clueless user issue.
Justin.
3967
days inactive
3968
days old
13 comments
4 participants
participants (4)
-
Fabian Deutsch -
Greg Sheremeta -
Justin Clacherty -
Sandro Bonazzola