4:20 a.m.
Hi,
Ovirt 4.2.3
I gdeplyed deployed glusterfs which seems to have gone well and then on to the hosted
engine... which seemed to be going well, but then the ovirt engine did not come online...
[ INFO ] TASK [Wait for the engine to come up on the target VM]
[ ERROR ] fatal: [localhost]: FAILED! => {"attempts": 120,
"changed": true, "cmd": ["hosted-engine",
"--vm-status", "--json"], "delta":
"0:00:00.225200", "end": "2018-06-09 15:15:24.434531",
"rc": 0, "start": "2018-06-09 15:15:24.209331",
"stderr": "", "stderr_lines": [], "stdout":
"{\"1\": {\"conf_on_shared_storage\": true,
\"live-data\": true, \"extra\":
\"metadata_parse_version=1\\nmetadata_feature_version=1\\ntimestamp=17346 (Sat Jun 9
15:15:19 2018)\\nhost-id=1\\nscore=3400\\nvm_conf_refresh_time=17346 (Sat Jun 9 15:15:19
2018)\\nconf_on_shared_storage=True\\nmaintenance=False\\nstate=EngineStarting\\nstopped=False\\n\",
\"hostname\": \"usbou-rhev01.pbi.global.pvt\", \"host-id\":
1, \"engine-status\": {\"reason\": \"failed liveliness
check\", \"health\": \"bad\", \"vm\": \"up\",
\"detail\": \"Up\"}, \"score\": 3400, \"stopped\":
false, \"maintenance\": false, \"crc32\": \"e3c31ac3\",
\"local_conf_timestamp\": 17346, \"host-ts\": 17346},
\"global_maintenance\": false}", "stdout_lines":
["{\"1\": {\"conf_on_shared_storage\": true,
\"live-data\": true, \"extra\":
\"metadata_parse_version=1\\nmetadata_feature_version=1\\ntimestamp=17346 (Sat Jun 9
15:15:19 2018)\\nhost-id=1\\nscore=3400\\nvm_conf_refresh_time=17346 (Sat Jun 9 15:15:19
2018)\\nconf_on_shared_storage=True\\nmaintenance=False\\nstate=EngineStarting\\nstopped=False\\n\",
\"hostname\": \"usbou-rhev01.pbi.global.pvt\", \"host-id\":
1, \"engine-status\": {\"reason\": \"failed liveliness
check\", \"health\": \"bad\", \"vm\": \"up\",
\"detail\": \"Up\"}, \"score\": 3400, \"stopped\":
false, \"maintenance\": false, \"crc32\": \"e3c31ac3\",
\"local_conf_timestamp\": 17346, \"host-ts\": 17346},
\"global_maintenance\": false}"]}
When I look at the host now it says Hosted Engine is running on the host, Hosted engine is
up, but I can not ping it, ssh to it or open the console on the VM.
I am pretty new to this setup so would appreciate any steps I can take to move this
forward.
Thanks
Bill
10:07 a.m.
New subject: gdeploy hosted engine failed but host says it is up what now?
Bill,
3 things that have given me trouble in the past...ymmv!
1) Static IP for the hosted engine, multiple times, I've tried dhcp with no luck
2) Size of thick brick for hosted engine must be 60GB or more, I've tried 50gb
mulitple times & it always fails.
3) Hosted engine & admin portal passwords, make them very simple, complex passwords
with special characters ...always failed
2:59 p.m.
New subject: gdeploy hosted engine failed but host says it is up what now?
Thanks for the input Femi... I used static for everything, my brick was 100GB and my
password has no special chars.
How do I get back to the point that I can try again though? I t seems to think my hosted
engine is up on the hosted engine page, so it isn't giving me the opportunity to try
to deploy it again.
I'm probably missing something stupid, but can't see to figure this out.
Thanks again, appreciate any advice.
Bill
-----Original Message-----
From: femi adegoke <ovirt(a)fateknollogee.com>
Sent: Sunday, June 10, 2018 1:07 AM
To: users(a)ovirt.org
Subject: [ovirt-users] Re: gdeploy hosted engine failed but host says it is up what now?
Bill,
3 things that have given me trouble in the past...ymmv!
1) Static IP for the hosted engine, multiple times, I've tried dhcp with no luck
2) Size of thick brick for hosted engine must be 60GB or more, I've tried 50gb
mulitple times & it always fails.
3) Hosted engine & admin portal passwords, make them very simple, complex passwords
with special characters ...always failed _______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org Privacy Statement:
https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/KGE453SG5CE...
3:05 p.m.
New subject: gdeploy hosted engine failed but host says it is up what now?
Not sure if it helps, but I just noticed I have about 300
Hosted engine host: usbou-rhev01 changed state: EngineStarting-EngineStop.
Then
Hosted engine host: usbou-rhev01 changed state: EngineStop-EngineDown.
Then
Hosted engine host: usbou-rhev01 changed state: EngineDown-EngineStart.
Then
Hosted engine host: usbou-rhev01 changed state: EngineStart-EngineStarting.
And then it starts over... so there is obviously something wrong with the VM...
Under the virtualization page, It says I have 1 running virtual machine but I can't
see it to delete it or get any visibility into it.
Thanks
Bill
-----Original Message-----
From: femi adegoke <ovirt(a)fateknollogee.com>
Sent: Sunday, June 10, 2018 1:07 AM
To: users(a)ovirt.org
Subject: [ovirt-users] Re: gdeploy hosted engine failed but host says it is up what now?
Bill,
3 things that have given me trouble in the past...ymmv!
1) Static IP for the hosted engine, multiple times, I've tried dhcp with no luck
2) Size of thick brick for hosted engine must be 60GB or more, I've tried 50gb
mulitple times & it always fails.
3) Hosted engine & admin portal passwords, make them very simple, complex passwords
with special characters ...always failed _______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org Privacy Statement:
https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/KGE453SG5CE...
11:18 a.m.
New subject: gdeploy hosted engine failed but host says it is up what now?
Hi,
\"engine-status\": {\"reason\": \"failed liveliness check\",
\"health\":
\"bad\", \"vm\": \"up\", \"detail\":
\"Up\"}
means that the engine VM is up at virt side although a liveliness check
over http is failing.
This could happen if your engine VM got a different network configuration
or something like that.
I'd suggest to connect to the engine VM over vnc and check the network
status there.
ovirt-ha-agent will try to keep the engine up so if the http health
liveliness check is failing, ovirt-ha-agent will try to restart the engine
VM.
On Sun, Jun 10, 2018 at 2:05 PM, <william.dossett(a)gmail.com> wrote:
Not sure if it helps, but I just noticed I have about 300
Hosted engine host: usbou-rhev01 changed state: EngineStarting-EngineStop.
Then
Hosted engine host: usbou-rhev01 changed state: EngineStop-EngineDown.
Then
Hosted engine host: usbou-rhev01 changed state: EngineDown-EngineStart.
Then
Hosted engine host: usbou-rhev01 changed state: EngineStart-EngineStarting.
And then it starts over... so there is obviously something wrong with the
VM...
Under the virtualization page, It says I have 1 running virtual machine
but I can't see it to delete it or get any visibility into it.
Thanks
Bill
-----Original Message-----
From: femi adegoke <ovirt(a)fateknollogee.com>
Sent: Sunday, June 10, 2018 1:07 AM
To: users(a)ovirt.org
Subject: [ovirt-users] Re: gdeploy hosted engine failed but host says it
is up what now?
Bill,
3 things that have given me trouble in the past...ymmv!
1) Static IP for the hosted engine, multiple times, I've tried dhcp with
no luck
2) Size of thick brick for hosted engine must be 60GB or more, I've tried
50gb mulitple times & it always fails.
3) Hosted engine & admin portal passwords, make them very simple, complex
passwords with special characters ...always failed
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org Privacy Statement:
https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-
guidelines/
List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/
message/KGE453SG5CEOJ2IQFQGN3JEU52UZXSD3/
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-
guidelines/
List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/
message/D7XP52YGAD3CZ4AC2VT6ON2DFP4YGNDV/
3:37 p.m.
New subject: gdeploy hosted engine failed but host says it is up what now?
Ok, yes I am starting to think this is a network issue. I have two networks. When I
setup hosted engine and gluster I used the private network 172.17.70.x as it was setting
up gluster and I assumed that I should use the private network for this. Its been a
while and I can’t remember exactly what steps I took setting up the management instance,
but I did give it a static address on our normal management VLAN. but now wondering if it
is on that private network.
Its been a while since I worked with ovirt and rhev, but, I normally could see a VM. I
cannot see this VM at all anywhere of I am looking in the wrong place, but I have tried
pretty much everything. I don’t know how I would VNC into it as I don’t see the VM or
anyway to access the console which I would guess is what I need to do, or access its
settings to verify the networking.
Thanks for the advice, but I seem to be missing something basic here.
Bill
From: Simone Tiraboschi <stirabos(a)redhat.com>
Sent: Monday, June 11, 2018 2:18 AM
To: william.dossett(a)gmail.com
Cc: femi adegoke <ovirt(a)fateknollogee.com>; users <users(a)ovirt.org>
Subject: Re: [ovirt-users] Re: gdeploy hosted engine failed but host says it is up what
now?
Hi,
\"engine-status\": {\"reason\": \"failed liveliness check\",
\"health\": \"bad\", \"vm\": \"up\",
\"detail\": \"Up\"}
means that the engine VM is up at virt side although a liveliness check over http is
failing.
This could happen if your engine VM got a different network configuration or something
like that.
I'd suggest to connect to the engine VM over vnc and check the network status there.
ovirt-ha-agent will try to keep the engine up so if the http health liveliness check is
failing, ovirt-ha-agent will try to restart the engine VM.
On Sun, Jun 10, 2018 at 2:05 PM, <william.dossett(a)gmail.com
<mailto:william.dossett@gmail.com> > wrote:
Not sure if it helps, but I just noticed I have about 300
Hosted engine host: usbou-rhev01 changed state: EngineStarting-EngineStop.
Then
Hosted engine host: usbou-rhev01 changed state: EngineStop-EngineDown.
Then
Hosted engine host: usbou-rhev01 changed state: EngineDown-EngineStart.
Then
Hosted engine host: usbou-rhev01 changed state: EngineStart-EngineStarting.
And then it starts over... so there is obviously something wrong with the VM...
Under the virtualization page, It says I have 1 running virtual machine but I can't
see it to delete it or get any visibility into it.
Thanks
Bill
-----Original Message-----
From: femi adegoke <ovirt(a)fateknollogee.com>
Sent: Sunday, June 10, 2018 1:07 AM
To: users(a)ovirt.org <mailto:users@ovirt.org>
Subject: [ovirt-users] Re: gdeploy hosted engine failed but host says it is up what now?
Bill,
3 things that have given me trouble in the past...ymmv!
1) Static IP for the hosted engine, multiple times, I've tried dhcp with no luck
2) Size of thick brick for hosted engine must be 60GB or more, I've tried 50gb
mulitple times & it always fails.
3) Hosted engine & admin portal passwords, make them very simple, complex passwords
with special characters ...always failed _______________________________________________
Users mailing list -- users(a)ovirt.org <mailto:users@ovirt.org>
To unsubscribe send an email to users-leave(a)ovirt.org <mailto:users-leave@ovirt.org>
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/KGE453SG5CE...
_______________________________________________
Users mailing list -- users(a)ovirt.org <mailto:users@ovirt.org>
To unsubscribe send an email to users-leave(a)ovirt.org <mailto:users-leave@ovirt.org>
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/D7XP52YGAD3...
4:53 p.m.
New subject: gdeploy hosted engine failed but host says it is up what now?
On Mon, Jun 11, 2018 at 2:37 PM, <william.dossett(a)gmail.com> wrote:
Ok, yes I am starting to think this is a network issue. I have two
networks. When I setup hosted engine and gluster I used the private
network 172.17.70.x as it was setting up gluster and I assumed that I
should use the private network for this. Its been a while and I can’t
remember exactly what steps I took setting up the management instance, but
I did give it a static address on our normal management VLAN. but now
wondering if it is on that private network.
Its been a while since I worked with ovirt and rhev, but, I normally could
see a VM. I cannot see this VM at all anywhere of I am looking in the
wrong place, but I have tried pretty much everything. I don’t know how I
would VNC into it as I don’t see the VM or anyway to access the console
which I would guess is what I need to do, or access its settings to verify
the networking.
Thanks for the advice, but I seem to be missing something basic here.
Run on your first host
hosted-engine --add-console-password
to set a temporary VNC password and then connect to it over VNC with
something like
remote-viewer vnc://<host>:<port>
Bill
*From:* Simone Tiraboschi <stirabos(a)redhat.com>
*Sent:* Monday, June 11, 2018 2:18 AM
*To:* william.dossett(a)gmail.com
*Cc:* femi adegoke <ovirt(a)fateknollogee.com>; users <users(a)ovirt.org>
*Subject:* Re: [ovirt-users] Re: gdeploy hosted engine failed but host
says it is up what now?
Hi,
\"engine-status\": {\"reason\": \"failed liveliness
check\", \"health\":
\"bad\", \"vm\": \"up\", \"detail\":
\"Up\"}
means that the engine VM is up at virt side although a liveliness check
over http is failing.
This could happen if your engine VM got a different network configuration
or something like that.
I'd suggest to connect to the engine VM over vnc and check the network
status there.
ovirt-ha-agent will try to keep the engine up so if the http health liveliness check
is failing, ovirt-ha-agent will try to restart the engine VM.
On Sun, Jun 10, 2018 at 2:05 PM, <william.dossett(a)gmail.com> wrote:
Not sure if it helps, but I just noticed I have about 300
Hosted engine host: usbou-rhev01 changed state: EngineStarting-EngineStop.
Then
Hosted engine host: usbou-rhev01 changed state: EngineStop-EngineDown.
Then
Hosted engine host: usbou-rhev01 changed state: EngineDown-EngineStart.
Then
Hosted engine host: usbou-rhev01 changed state: EngineStart-EngineStarting.
And then it starts over... so there is obviously something wrong with the
VM...
Under the virtualization page, It says I have 1 running virtual machine
but I can't see it to delete it or get any visibility into it.
Thanks
Bill
-----Original Message-----
From: femi adegoke <ovirt(a)fateknollogee.com>
Sent: Sunday, June 10, 2018 1:07 AM
To: users(a)ovirt.org
Subject: [ovirt-users] Re: gdeploy hosted engine failed but host says it
is up what now?
Bill,
3 things that have given me trouble in the past...ymmv!
1) Static IP for the hosted engine, multiple times, I've tried dhcp with
no luck
2) Size of thick brick for hosted engine must be 60GB or more, I've tried
50gb mulitple times & it always fails.
3) Hosted engine & admin portal passwords, make them very simple, complex
passwords with special characters ...always failed
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org Privacy Statement:
https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-
guidelines/
List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/
message/KGE453SG5CEOJ2IQFQGN3JEU52UZXSD3/
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-
guidelines/
List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/
message/D7XP52YGAD3CZ4AC2VT6ON2DFP4YGNDV/
2356
days inactive
2357
days old
6 comments
3 participants
participants (3)
-
femi adegoke -
Simone Tiraboschi -
william.dossett＠gmail.com