8:49 p.m.
I have followed the setup on
http://www.ovirt.org/documentation/admin-guide/serial-console-setup/
I am able to ssh to the hosted engine and select a VM.
A VM with console enabled and permissions set gives a blank screen (
freezes ).
So I checked serial-getty@.service
Am I right this service should run on a host?
When I check status, I get this:
... systemd[1]: *Dependency failed for Serial Getty on hvc0.*
.. systemd[1]: *Job serial-getty(a)hvc0.service/start failed with result
'dependency'.*
What needs to be done? When I restart the service it takes a long tine and
looks like a timeout is triggered.
Looking forward to use the serial console feature.
11:06 a.m.
This is a multi-part message in MIME format.
--------------040709060200050404090703
Content-Type: text/plain; charset=windows-1252; format=flowed
Content-Transfer-Encoding: quoted-printable
Le 24/04/2016 19:49, Paul Groeneweg | Pazion a =E9crit :
I have followed the setup on=20
http://www.ovirt.org/documentation/admin-guide/serial-console-setup/
I am able to ssh to the hosted engine and select a VM.
A VM with console enabled and permissions set gives a blank screen (=20
freezes ).
Many reasons can lead to this, depending on the guest os.
Have you modified all needed files into the guest OS?
This is what I did for my vms (tty0 is to get the boot sequence into=20
the spice/vnc console insted of a black screen)
CentOS 5:
* grub.conf
for i in $(cat /tmp/update_grub); do ssh root@$i 'sed -e=20
"s/^\\t\(kernel\).*$/&*console\=3Dtty0 console\=3DttyS0*/g" -i=20
/etc/grub.conf'; done
* inittab
for i in $(cat /tmp/liste) ; do echo $i; ssh root@$i "sed -i \"/tty6/a=20
*S0:2345:respawn:/sbin/mingetty ttyS0*\" /etc/inittab"; done
* securetty
for i in $(cat /tmp/liste) ; do echo $i; ssh root@$i "sed -i \"/tty11/a=20
*ttyS0*\" /etc/securetty"; done
CentOS 6:
* grub.conf
for i in $(cat /tmp/update_grub); do ssh root@$i 'sed -e=20
"s/^\\t\(kernel\).*$/&*console\=3Dtty0 console\=3DttyS0*/g" -i=20
/etc/grub.conf'; done
* securetty
for i in $(cat /tmp/liste) ; do echo $i; ssh root@$i "sed -i \"/tty11/a=20
*ttyS0*\" /etc/securetty"; done
CentOS 7 : securetty file already includes ttyS0 by default
* grub2.cfg
for i in $(cat /tmp/update_grub2);do echo -e "$i:\n"; ssh root@$i 'sed=20
-e "s/^\\t\(linux16\).*$/&*console\=3Dtty0 console\=3DttyS0*/g" -i=20
/boot/grub2/grub.cfg'; done
for i in $(cat /tmp/update_grub2);do echo -e "$i:\n"; ssh root@$i=20
'grub2-mkconfig -o /boot/grub2/grub.cfg'; done
As a last alternative, grubby does the staff on every OS and grub=20
versions, but doesn't modify the securetty file.
* grubby
for i in $(cat /tmp/update_grub2);do echo -e "$i:\n"; ssh root@$i=20
"grubby --update-kernel=3DALL --args=3D\"console=3Dtty0 console=3DttyS0\"=
"; done
So I checked serial-getty@.service
So you run el7 :)
Am I right this service should run on a host?
Sure, but not
enough
When I check status, I get this:
... systemd[1]: *Dependency failed for Serial Getty on hvc0.*
.. systemd[1]: *Job serial-getty(a)hvc0.service/start failed with result=20
'dependency'.*
*
*
What needs to be done? When I restart the service it takes a long tine=20
and looks like a timeout is triggered.
you can check if ttyS0 is opened with stty < /dev/ttyS0
If true, the issue might come from a right permission.
Did you add the wanted user (doesn't work with group) per vm with the=20
minimum UserVmManager role?
if the user is SuperUser, it still can't connect to the console due to a=20
bug.
Looking forward to use the serial console feature.
it works very well and it is very convinient:)
Just a last tip : the default escape character to escape from ssh is "~."
Good luck!
*
*
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
--=20
Nathana=EBl Blanchet
Supervision r=E9seau
P=F4le Infrastrutures Informatiques
227 avenue Professeur-Jean-Louis-Viala
34193 MONTPELLIER CEDEX 5 =09
T=E9l. 33 (0)4 67 54 84 55
Fax 33 (0)4 67 54 84 14
blanchet(a)abes.fr
--------------040709060200050404090703
Content-Type: text/html; charset=windows-1252
Content-Transfer-Encoding: quoted-printable
<html>
<head>
<meta content=3D"text/html; charset=3Dwindows-1252"
http-equiv=3D"Content-Type">
</head>
<body bgcolor=3D"#FFFFFF" text=3D"#000000">
Le 24/04/2016 19:49, Paul Groeneweg | Pazion a =E9crit=A0:<br>
<blockquote
cite=3D"mid:CAE1B0QJsn8hxA5C5vkZci-UTCMcMtvWcZG29zjegnttGoSeyLg@mail.gmai=
l.com"
type=3D"cite">
<div dir=3D"ltr">I have followed the setup on=A0<a
moz-do-not-send=3D"true"
href=3D"http://www.ovirt.org/documentation/admin-guide/serial-consol...
up/"><a class=3D"moz-txt-link-freetext"
href=3D"http://www.ovirt.org/docu=
mentation/admin-guide/serial-console-setup/">http://www.ovirt.org...
tation/admin-guide/serial-console-setup/</a></a>
<div><br>
</div>
<div>I am able to ssh to the hosted engine and select a VM.</div>
<div>A VM with console enabled and permissions set gives a blank
screen ( freezes ).</div>
</div>
</blockquote>
Many reasons can lead to this, depending on the guest os. <br>
Have you modified all needed files into the guest OS?<br>
<br>
=A0This is what I did for my vms (tty0 is to get the boot sequence
into the spice/vnc console insted of a black screen) <br>
<br>
CentOS 5:<br>
<ul>
<li>grub.conf<br>
</li>
</ul>
for i in $(cat /tmp/update_grub); do ssh root@$i 'sed -e
"s/^\\t\(kernel\).*$/&<b> console\=3Dtty0
console\=3DttyS0</b>/g"=
-i
/etc/grub.conf'; done<br>
<ul>
<li>inittab<br>
</li>
</ul>
for i in $(cat /tmp/liste) ; do echo $i; ssh root@$i "sed -i
\"/tty6/a <b>S0:2345:respawn:/sbin/mingetty ttyS0</b>\"
/etc/inittab"; done<br>
<ul>
<li>securetty<br>
</li>
</ul>
for i in $(cat /tmp/liste) ; do echo $i; ssh root@$i "sed -i
\"/tty11/a <b>ttyS0</b>\" /etc/securetty"; done<br>
<br>
CentOS 6:<br>
<ul>
<li>grub.conf<br>
</li>
</ul>
for i in $(cat /tmp/update_grub); do ssh root@$i 'sed -e
"s/^\\t\(kernel\).*$/&<b> console\=3Dtty0
console\=3DttyS0</b>/g"=
-i
/etc/grub.conf'; done<br>
<ul>
<li>securetty<br>
</li>
</ul>
for i in $(cat /tmp/liste) ; do echo $i; ssh root@$i "sed -i
\"/tty11/a <b>ttyS0</b>\" /etc/securetty"; done<br>
<br>
CentOS 7 : securetty file already includes ttyS0 by default<br>
<ul>
<li>grub2.cfg<br>
</li>
</ul>
for i in $(cat /tmp/update_grub2);do echo -e "$i:\n"; ssh root@$i
'sed -e "s/^\\t\(linux16\).*$/&<b> console\=3Dtty0
console\=3Dtty=
S0</b>/g"
-i /boot/grub2/grub.cfg'; done<br>
for i in $(cat /tmp/update_grub2);do echo -e "$i:\n"; ssh root@$i
'grub2-mkconfig -o /boot/grub2/grub.cfg'; done<br>
<br>
As a last alternative, grubby does the staff on every OS and grub
versions, but doesn't modify the securetty file.<br>
<ul>
<li>grubby <br>
</li>
</ul>
for i in $(cat /tmp/update_grub2);do echo -e "$i:\n"; ssh root@$i
"grubby --update-kernel=3DALL --args=3D\"console=3Dtty0 console=3Dtty=
S0\"";
done<br>
<blockquote
cite=3D"mid:CAE1B0QJsn8hxA5C5vkZci-UTCMcMtvWcZG29zjegnttGoSeyLg@mail.gmai=
l.com"
type=3D"cite">
<div dir=3D"ltr">
<div><br>
</div>
<div>So I checked=A0<span style=3D"line-height:1.5"><a
class=3D"m=
oz-txt-link-abbreviated"
href=3D"mailto:serial-getty@.service">serial-get=
ty@.service</a></span></div>
</div>
</blockquote>
So you run el7 :)<br>
<blockquote
cite=3D"mid:CAE1B0QJsn8hxA5C5vkZci-UTCMcMtvWcZG29zjegnttGoSeyLg@mail.gmai=
l.com"
type=3D"cite">
<div dir=3D"ltr">
<div>Am I right this service should run on a host?</div>
</div>
</blockquote>
Sure, but not enough<br>
<blockquote
cite=3D"mid:CAE1B0QJsn8hxA5C5vkZci-UTCMcMtvWcZG29zjegnttGoSeyLg@mail.gmai=
l.com"
type=3D"cite">
<div dir=3D"ltr">
<div><br>
</div>
<div>When I check status, I get this:<br>
<div><br>
</div>
<div>
<p class=3D"p1"><span class=3D"s1">...
systemd[1]: </span><sp=
an
class=3D"s2"><b>Dependency failed for Serial Getty on
hvc0.</b></span></p>
<p class=3D"p1"><span class=3D"s1">..
systemd[1]: <b>Job
<a class=3D"moz-txt-link-abbreviated"
href=3D"mailto:se=
rial-getty@hvc0.service/start">serial-getty(a)hvc0.service/start</a> failed=
with result
'dependency'.</b></span></p>
<p class=3D"p1"><span
class=3D"s1"><b><br>
</b></span></p>
<p class=3D"p1"><span class=3D"s1">What needs
to be done? Whe=
n I
restart the service it takes a long tine and looks like
a timeout is triggered.</span></p>
</div>
</div>
</div>
</blockquote>
you can check if ttyS0 is opened with=A0 stty < /dev/ttyS0<br>
If true, the issue might come from a right permission. <br>
Did you add the wanted user (doesn't work with group) per vm with
the minimum UserVmManager role? <br>
if the user is SuperUser, it still can't connect to the console due
to a bug.<br>
<blockquote
cite=3D"mid:CAE1B0QJsn8hxA5C5vkZci-UTCMcMtvWcZG29zjegnttGoSeyLg@mail.gmai=
l.com"
type=3D"cite">
<div dir=3D"ltr">
<div>
<div>
<p class=3D"p1"><span class=3D"s1">Looking
forward to use the
serial console feature.</span></p>
</div>
</div>
</div>
</blockquote>
it works very well and it is very convinient:) <br>
<br>
Just a last tip : the default escape character to escape from ssh is
"~."<br>
<br>
Good luck!<br>
<blockquote
cite=3D"mid:CAE1B0QJsn8hxA5C5vkZci-UTCMcMtvWcZG29zjegnttGoSeyLg@mail.gmai=
l.com"
type=3D"cite">
<div dir=3D"ltr">
<div>
<div>
<p class=3D"p1"><span
class=3D"s1"><b><br>
</b></span></p>
</div>
</div>
</div>
<br>
<fieldset class=3D"mimeAttachmentHeader"></fieldset>
<br>
<pre wrap=3D"">_______________________________________________
Users mailing list
<a class=3D"moz-txt-link-abbreviated"
href=3D"mailto:Users@ovirt.org">Use=
rs(a)ovirt.org</a>
<a class=3D"moz-txt-link-freetext"
href=3D"http://lists.ovirt.org/mailman=
/listinfo/users">http://lists.ovirt.org/mailman/listinfo/users</a>
</pre>
</blockquote>
<br>
<pre class=3D"moz-signature" cols=3D"72">--=20
Nathana=EBl Blanchet
Supervision r=E9seau
P=F4le Infrastrutures Informatiques
227 avenue Professeur-Jean-Louis-Viala
34193 MONTPELLIER CEDEX 5 =09
T=E9l. 33 (0)4 67 54 84 55
Fax 33 (0)4 67 54 84 14
<a class=3D"moz-txt-link-abbreviated"
href=3D"mailto:blanchet@abes.fr">bl=
anchet(a)abes.fr</a> </pre>
</body>
</html>
--------------040709060200050404090703--
2:08 p.m.
Hello,
I attach to this thread to detail how I was able to have serial console
working both on CentOS 6.7 and CentOS 7.2 VMs on 3.6.5
- CentOS 6.7
Basically what described in general here (but using ttyS0 instead ttyS1):
http://www.cyberciti.biz/faq/centos-rhel-6-install-serial-console/
So in /boot/grub/grub.conf
a) right before the "hiddenmenu" line:
serial --unit=*0 *--speed=19200 --word=8 --parity=no --stop=1
terminal --timeout=5 serial console
b) At the end of kernel line added:
console=tty0 console=ttyS*0*,19200n8
Added at the end of /etc/securetty the line
ttyS0
Only difference is that as I used ttyS0, the upstart configuration was not
needed: the system after reboot was already listening on ttyS0
Creating upstart config file generated 2 processes listening on ttyS0
- CentOS 7.2
created VM with virtio console enabled in options and basically following
what described here
https://www.youtube.com/watch?v=Sx2HRwFqG7o
from default configuration I got after install:
Add in /etc/default/grub "console=ttyS0" in GRUB_CMDLINE_LINUX so that it
is now:
GRUB_CMDLINE_LINUX="rd.lvm.lv=centos/root rd.lvm.lv=centos/swap rhgb quiet
console=ttyS0"
grub2-mkconfig -o /boot/grub2/grub.cfg
reboot the VM
From a client:
$ ssh -t -p 2222 ovirt-vmconsole(a)ovirt.lutwyn.org
connect
Available Serial Consoles:
00 c6desktop[68a82ada-a1d2-44d0-85b0-f3a08cc2f579]
01 c7desktop[787f46f6-de4a-4b42-ba39-9609908c2905]
SELECT> 01
CentOS Linux 7 (Core)
Kernel 3.10.0-327.13.1.el7.x86_64 on an x86_64
Host-006 login: root
Password:
Last login: Tue May 3 01:34:57 on pts/0
[root@Host-006 ~]#
[root@Host-006 ~]#
[root@Host-006 ~]# cat /etc/redhat-release
CentOS Linux release 7.2.1511 (Core)
[root@Host-006 ~]# exit
HIH,
Gianluca
10:47 a.m.
--Apple-Mail=_BD09F72D-91EC-46F7-A2A6-B1736D2F6445
Content-Transfer-Encoding: quoted-printable
Content-Type: text/plain;
charset=us-ascii
On 03 May 2016, at 13:08, Gianluca Cecchi
<gianluca.cecchi(a)gmail.com> =
wrote:
=20
Hello,
I attach to this thread to detail how I was able to have serial =
console working
both on CentOS 6.7 and CentOS 7.2 VMs on 3.6.5
=20
- CentOS 6.7
Basically what described in general here (but using ttyS0 instead =
ttyS1):
<http://www.cyberciti.biz/faq/centos-rhel-6-install-serial-console/>
=20
So in /boot/grub/grub.conf=20
=20
a) right before the "hiddenmenu" line:
=20
serial --unit=3D0 --speed=3D19200 --word=3D8 --parity=3Dno --stop=3D1
terminal --timeout=3D5 serial console
=20
b) At the end of kernel line added:
console=3Dtty0 console=3DttyS0,19200n8
=20
Added at the end of /etc/securetty the line
ttyS0
=20
Only difference is that as I used ttyS0, the upstart configuration was =
not
needed: the system after reboot was already listening on ttyS0
Creating upstart config file generated 2 processes listening on
ttyS0
=20
=20
- CentOS 7.2
created VM with virtio console enabled in options and basically =
following what
described here
<https://www.youtube.com/watch?v=3DSx2HRwFqG7o>
=20
from default configuration I got after install:
=20
Add in /etc/default/grub "console=3DttyS0" in GRUB_CMDLINE_LINUX so =
that it is now:
GRUB_CMDLINE_LINUX=3D"rd.lvm.lv
<http://rd.lvm.lv/>=3Dcentos/root =
rd.lvm.lv
<http://rd.lvm.lv/>=3Dcentos/swap rhgb quiet console=3DttyS0"
=20
grub2-mkconfig -o /boot/grub2/grub.cfg
=20
reboot the VM
=20
=46rom a client:
$ ssh -t -p 2222 ovirt-vmconsole(a)ovirt.lutwyn.org =
<mailto:ovirt-vmconsole@ovirt.lutwyn.org> connect
Available Serial Consoles:
00 c6desktop[68a82ada-a1d2-44d0-85b0-f3a08cc2f579]
01 c7desktop[787f46f6-de4a-4b42-ba39-9609908c2905]
SELECT> 01
=20
CentOS Linux 7 (Core)
Kernel 3.10.0-327.13.1.el7.x86_64 on an x86_64
=20
Host-006 login: root
Password:=20
Last login: Tue May 3 01:34:57 on pts/0
[root@Host-006 ~]#=20
[root@Host-006 ~]#=20
[root@Host-006 ~]# cat /etc/redhat-release
CentOS Linux release 7.2.1511 (Core)=20
[root@Host-006 ~]# exit
Hi Gianluca,
would you care to extend =
http://www.ovirt.org/documentation/admin-guide/serial-console-setup/ =
with this useful info? I suppose there are quite a few people who would =
find handy some tips how to set it up for various guest OSes
Thanks,
michal
=20
HIH,
Gianluca
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
--Apple-Mail=_BD09F72D-91EC-46F7-A2A6-B1736D2F6445
Content-Transfer-Encoding: quoted-printable
Content-Type: text/html;
charset=us-ascii
<html><head><meta http-equiv=3D"Content-Type"
content=3D"text/html =
charset=3Dus-ascii"></head><body style=3D"word-wrap: break-word; =
-webkit-nbsp-mode: space; -webkit-line-break: after-white-space;" =
class=3D""><br class=3D""><div><blockquote
type=3D"cite" class=3D""><div =
class=3D"">On 03 May 2016, at 13:08, Gianluca Cecchi <<a =
href=3D"mailto:gianluca.cecchi@gmail.com" =
class=3D"">gianluca.cecchi(a)gmail.com</a>&gt;
wrote:</div><br =
class=3D"Apple-interchange-newline"><div class=3D""><div
dir=3D"ltr" =
class=3D""><div class=3D"gmail_extra"><div =
class=3D"gmail_quote">Hello,</div><div
class=3D"gmail_quote">I attach to =
this thread to detail how I was able to have serial console working both =
on CentOS 6.7 and CentOS 7.2 VMs on 3.6.5</div><div =
class=3D"gmail_quote"><br class=3D""></div><div
class=3D"gmail_quote">- =
CentOS 6.7</div><div class=3D"gmail_quote">Basically what described
in =
general here (but using ttyS0 instead ttyS1):</div><div =
class=3D"gmail_quote"><a =
href=3D"http://www.cyberciti.biz/faq/centos-rhel-6-install-serial-console/=
" =
class=3D"">http://www.cyberciti.biz/faq/centos-rhel-6-install-serial-conso=
le/</a><br class=3D""></div><div
class=3D"gmail_quote"><br =
class=3D""></div><div class=3D"gmail_quote">So =
in /boot/grub/grub.conf </div><div
class=3D"gmail_quote"><br =
class=3D""></div><div class=3D"gmail_quote">a) right
before the =
"hiddenmenu" line:</div><div class=3D"gmail_quote"><div
=
class=3D"gmail_quote"><br class=3D""></div><div =
class=3D"gmail_quote">serial --unit=3D<b class=3D"">0
</b>--speed=3D19200 =
--word=3D8 --parity=3Dno --stop=3D1</div><div =
class=3D"gmail_quote">terminal --timeout=3D5 serial =
console</div></div><div class=3D"gmail_quote"><br
class=3D""></div><div =
class=3D"gmail_quote">b) At the end of kernel line added:</div><div
=
class=3D"gmail_quote">console=3Dtty0 console=3DttyS<b =
class=3D"">0</b>,19200n8<br
class=3D""></div><div =
class=3D"gmail_quote"><br class=3D""></div><div =
class=3D"gmail_quote">Added at the end of /etc/securetty the =
line</div><div class=3D"gmail_quote">ttyS0<br
class=3D""></div><div =
class=3D"gmail_quote"><br class=3D""></div><div
class=3D"gmail_quote">Only=
difference is that as I used ttyS0, the upstart configuration was not =
needed: the system after reboot was already listening on ttyS0<br =
class=3D""></div><div class=3D"gmail_quote">Creating
upstart config file =
generated 2 processes listening on ttyS0</div><div =
class=3D"gmail_quote"><br class=3D""></div><div
class=3D"gmail_quote"><br =
class=3D""></div><div class=3D"gmail_quote"><div
class=3D"gmail_quote">- =
CentOS 7.2</div><div class=3D"gmail_quote">created VM with virtio =
console enabled in options and basically following what described =
here</div><div class=3D"gmail_quote"><a =
href=3D"https://www.youtube.com/watch?v=3DSx2HRwFqG7o" =
class=3D"">https://www.youtube.com/watch?v=3DSx2HRwFqG7o<...
=
class=3D"gmail_quote"><br class=3D""></div><div
class=3D"gmail_quote">from=
default configuration I got after install:</div><div =
class=3D"gmail_quote"><br class=3D""></div><div
class=3D"gmail_quote">Add =
in /etc/default/grub "console=3DttyS0" in GRUB_CMDLINE_LINUX so that it =
is now:</div><div
class=3D"gmail_quote">GRUB_CMDLINE_LINUX=3D"<a =
href=3D"http://rd.lvm.lv/"
class=3D"">rd.lvm.lv</a>=3Dcentos/root <a =
href=3D"http://rd.lvm.lv/"
class=3D"">rd.lvm.lv</a>=3Dcentos/swap rhgb =
quiet console=3DttyS0"</div><div class=3D"gmail_quote"><br
=
class=3D""></div><div
class=3D"gmail_quote">grub2-mkconfig -o =
/boot/grub2/grub.cfg</div><div class=3D"gmail_quote"><br =
class=3D""></div><div class=3D"gmail_quote">reboot the
VM</div><div =
class=3D"gmail_quote"><br class=3D""></div><div
class=3D"gmail_quote">=46r=
om a client:</div><div class=3D"gmail_quote">$ ssh -t -p 2222 <a
=
href=3D"mailto:ovirt-vmconsole@ovirt.lutwyn.org" =
class=3D"">ovirt-vmconsole(a)ovirt.lutwyn.org</a>
connect</div><div =
class=3D"gmail_quote">Available Serial Consoles:</div><div =
class=3D"gmail_quote">00 =
c6desktop[68a82ada-a1d2-44d0-85b0-f3a08cc2f579]</div><div =
class=3D"gmail_quote">01 =
c7desktop[787f46f6-de4a-4b42-ba39-9609908c2905]</div><div =
class=3D"gmail_quote">SELECT> 01</div><div
class=3D"gmail_quote"><br =
class=3D""></div><div class=3D"gmail_quote">CentOS
Linux 7 =
(Core)</div><div class=3D"gmail_quote">Kernel
3.10.0-327.13.1.el7.x86_64 =
on an x86_64</div><div class=3D"gmail_quote"><br
class=3D""></div><div =
class=3D"gmail_quote">Host-006 login: root</div><div =
class=3D"gmail_quote">Password: </div><div
class=3D"gmail_quote">Last=
login: Tue May 3 01:34:57 on pts/0</div><div =
class=3D"gmail_quote">[root@Host-006 ~]# </div><div =
class=3D"gmail_quote">[root@Host-006 ~]# </div><div =
class=3D"gmail_quote">[root@Host-006 ~]# cat =
/etc/redhat-release</div><div class=3D"gmail_quote">CentOS Linux
release =
7.2.1511 (Core) </div><div
class=3D"gmail_quote">[root@Host-006 ~]# =
exit</div></div></div></div></div></blockquote><div><br
=
class=3D""></div>Hi Gianluca,</div><div>would you care to
extend <a =
href=3D"http://www.ovirt.org/documentation/admin-guide/serial-consol...
p/" =
class=3D"">http://www.ovirt.org/documentation/admin-guide/se...
etup/</a> with this useful info? I suppose there are quite a few people =
who would find handy some tips how to set it up for various guest =
OSes</div><div><br =
class=3D""></div><div>Thanks,</div><div>michal</div><div><br
=
class=3D""><blockquote type=3D"cite"
class=3D""><div class=3D""><div =
dir=3D"ltr" class=3D""><div
class=3D"gmail_extra"><div =
class=3D"gmail_quote"><div class=3D"gmail_quote"><br
class=3D""></div><div=
class=3D"gmail_quote">HIH,</div><div =
class=3D"gmail_quote">Gianluca</div></div></div></div>
_______________________________________________<br class=3D"">Users =
mailing list<br class=3D""><a href=3D"mailto:Users@ovirt.org"
=
class=3D"">Users(a)ovirt.org</a><br =
class=3D"">http://lists.ovirt.org/mailman/listinfo/users<br =
class=3D""></div></blockquote></div><br
class=3D""></body></html>=
--Apple-Mail=_BD09F72D-91EC-46F7-A2A6-B1736D2F6445--
3124
days inactive
3134
days old
3 comments
4 participants
participants (4)
-
Gianluca Cecchi -
Michal Skrivanek -
Nathanaël Blanchet -
Paul Groeneweg | Pazion