11:12 p.m.
This is a multipart message in MIME format.
------=_NextPart_000_00C5_01D1ECB7.2CD482F0
Content-Type: text/plain;
charset="UTF-8"
Content-Transfer-Encoding: quoted-printable
I create a cluster which already enabled ovs network as you mentioned , =
but when I create vm in this cluster, I can only using =
ovirtmgmt/ovirtmgmt vNIC profile, which is still a Linux bridge.
I found no way to add a OVS vNIC profile, I have to chose =
ovirtmgmt/ovirtmgmt vNIC to setup a VM. After VM is started, the vm is =
still using Linux bridge to communicate with outside, not the ovs.
=20
Need I to create a ovs bridge or vport and bind it to physical NIC in =
vdsm manually?
=20
Hope your reply as soon as possible.
Thank you
Mark
=20
=E5=8F=91=E4=BB=B6=E4=BA=BA: users-bounces(a)ovirt.org =
[mailto:users-bounces@ovirt.org] =E4=BB=A3=E8=A1=A8 Meni Yakove
=E5=8F=91=E9=80=81=E6=97=B6=E9=97=B4: 2016=E5=B9=B48=E6=9C=881=E6=97=A5 =
16:42
=E6=94=B6=E4=BB=B6=E4=BA=BA: Dan Kenigsberg
=E4=B8=BB=E9=A2=98: Re: [ovirt-users] [ovirt-devel] How to add ovs-based =
VM in version 4.0.2? Thank you
=20
On Mon, Aug 1, 2016 at 11:07 AM, Dan Kenigsberg <danken(a)redhat.com> =
wrote:
On Mon, Aug 01, 2016 at 02:02:52PM +0800, lifuqiong wrote:
Hi, I upgrade my ovirt to version 4.0.2.2, how to using ovs in this =
version?
Is there any instruction? Thank you
Please note and note well: OVS is not production-grade yet. It is only a
preliminary tech preview, under active development.
However, we'd be very happy to get your help in testing it (and possibly
fixing it, too).
When defining a new cluster, you should see a check box, letting you
select OVS for that cluster.=20
=20
To be precise, this is not a check box. In the Edit Cluster dialog, look =
at the "switch=20
type" option, and change "LEGACY" to "OVS".
=20
=20
=20
After being checked, each VM network that
is defined in your cluster would be implemented with OVS instead of
Linux bridge.
As aluded before, there are plenty of known definciencies (e.g., no
persistence of ip config on VM network, no live migration, not all bond
modes, etc etc). But do not hesitate to raise other issues with the
devel mailing list.
Happy testing!
Dan.
_______________________________________________
Devel mailing list
Devel(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/devel
=20
------=_NextPart_000_00C5_01D1ECB7.2CD482F0
Content-Type: text/html;
charset="UTF-8"
Content-Transfer-Encoding: quoted-printable
<html xmlns:v=3D"urn:schemas-microsoft-com:vml" =
xmlns:o=3D"urn:schemas-microsoft-com:office:office" =
xmlns:w=3D"urn:schemas-microsoft-com:office:word" =
xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" =
xmlns=3D"http://www.w3.org/TR/REC-html40"><head><meta =
http-equiv=3DContent-Type content=3D"text/html; charset=3Dutf-8"><meta =
name=3DGenerator content=3D"Microsoft Word 14 (filtered =
medium)"><style><!--
/* Font Definitions */
@font-face
{font-family:=E5=AE=8B=E4=BD=93;
panose-1:2 1 6 0 3 1 1 1 1 1;}
@font-face
{font-family:=E5=AE=8B=E4=BD=93;
panose-1:2 1 6 0 3 1 1 1 1 1;}
@font-face
{font-family:Calibri;
panose-1:2 15 5 2 2 2 4 3 2 4;}
@font-face
{font-family:"\@=E5=AE=8B=E4=BD=93";
panose-1:2 1 6 0 3 1 1 1 1 1;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0cm;
margin-bottom:.0001pt;
font-size:12.0pt;
font-family:=E5=AE=8B=E4=BD=93;}
a:link, span.MsoHyperlink
{mso-style-priority:99;
color:blue;
text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
{mso-style-priority:99;
color:purple;
text-decoration:underline;}
span.EmailStyle17
{mso-style-type:personal-reply;
font-family:"Calibri","sans-serif";
color:#1F497D;}
.MsoChpDefault
{mso-style-type:export-only;
font-family:"Calibri","sans-serif";}
@page WordSection1
{size:612.0pt 792.0pt;
margin:72.0pt 90.0pt 72.0pt 90.0pt;}
div.WordSection1
{page:WordSection1;}
--></style><!--[if gte mso 9]><xml>
<o:shapedefaults v:ext=3D"edit" spidmax=3D"1026" />
</xml><![endif]--><!--[if gte mso 9]><xml>
<o:shapelayout v:ext=3D"edit">
<o:idmap v:ext=3D"edit" data=3D"1" />
</o:shapelayout></xml><![endif]--></head><body lang=3DZH-CN
link=3Dblue =
vlink=3Dpurple><div class=3DWordSection1><p class=3DMsoNormal =
style=3D'text-indent:21.0pt'><span lang=3DEN-US =
style=3D'font-size:10.5pt;font-family:"Calibri","sans-serif";color:#1F497=
D'>I create a cluster which already enabled ovs network as you mentioned =
, but when I create vm in this cluster, =C2=A0I can only using =
ovirtmgmt/ovirtmgmt vNIC profile, which is still a Linux =
bridge.<o:p></o:p></span></p><p class=3DMsoNormal><span
lang=3DEN-US =
style=3D'font-size:10.5pt;font-family:"Calibri","sans-serif";color:#1F497=
D'>I found no way to add a OVS vNIC profile,=C2=A0 I have to chose =
ovirtmgmt/ovirtmgmt vNIC to setup a VM. After VM is started, the vm is =
still using Linux bridge to communicate with outside, not the =
ovs.<o:p></o:p></span></p><p class=3DMsoNormal><span
lang=3DEN-US =
style=3D'font-size:10.5pt;font-family:"Calibri","sans-serif";color:#1F497=
D'><o:p> </o:p></span></p><p
class=3DMsoNormal><span lang=3DEN-US =
style=3D'font-size:10.5pt;font-family:"Calibri","sans-serif";color:#1F497=
D'>Need I to create a ovs bridge or vport and bind it to physical NIC in =
vdsm manually?<o:p></o:p></span></p><p
class=3DMsoNormal><span =
lang=3DEN-US =
style=3D'font-size:10.5pt;font-family:"Calibri","sans-serif";color:#1F497=
D'><o:p> </o:p></span></p><p
class=3DMsoNormal><span lang=3DEN-US =
style=3D'font-size:10.5pt;font-family:"Calibri","sans-serif";color:#1F497=
D'>Hope your reply as soon as
possible.<o:p></o:p></span></p><p =
class=3DMsoNormal><span lang=3DEN-US =
style=3D'font-size:10.5pt;font-family:"Calibri","sans-serif";color:#1F497=
D'>Thank you<o:p></o:p></span></p><p
class=3DMsoNormal><span =
lang=3DEN-US =
style=3D'font-size:10.5pt;font-family:"Calibri","sans-serif";color:#1F497=
D'>Mark<o:p></o:p></span></p><p
class=3DMsoNormal><a =
name=3D"_MailEndCompose"><span lang=3DEN-US =
style=3D'font-size:10.5pt;font-family:"Calibri","sans-serif";color:#1F497=
D'><o:p> </o:p></span></a></p><p
class=3DMsoNormal><b><span =
style=3D'font-size:10.0pt'>=E5=8F=91=E4=BB=B6=E4=BA=BA<span =
lang=3DEN-US>:</span></span></b><span lang=3DEN-US =
style=3D'font-size:10.0pt'> users-bounces(a)ovirt.org =
[mailto:users-bounces@ovirt.org] </span><b><span =
style=3D'font-size:10.0pt'>=E4=BB=A3=E8=A1=A8 </span></b><span
=
lang=3DEN-US style=3D'font-size:10.0pt'>Meni
Yakove<br></span><b><span =
style=3D'font-size:10.0pt'>=E5=8F=91=E9=80=81=E6=97=B6=E9=97=B4<span =
lang=3DEN-US>:</span></span></b><span lang=3DEN-US =
style=3D'font-size:10.0pt'> 2016</span><span =
style=3D'font-size:10.0pt'>=E5=B9=B4<span =
lang=3DEN-US>8</span>=E6=9C=88<span
lang=3DEN-US>1</span>=E6=97=A5<span =
lang=3DEN-US> 16:42<br></span><b>=E6=94=B6=E4=BB=B6=E4=BA=BA<span
=
lang=3DEN-US>:</span></b><span lang=3DEN-US> Dan =
Kenigsberg<br></span><b>=E4=B8=BB=E9=A2=98<span =
lang=3DEN-US>:</span></b><span lang=3DEN-US> Re: [ovirt-users] =
[ovirt-devel] How to add ovs-based VM in version 4.0.2? Thank =
you<o:p></o:p></span></span></p><p
class=3DMsoNormal><span =
lang=3DEN-US><o:p> </o:p></span></p><div><div><div><p
=
class=3DMsoNormal><span lang=3DEN-US>On Mon, Aug 1, 2016 at 11:07 AM, =
Dan Kenigsberg <<a href=3D"mailto:danken@redhat.com" =
target=3D"_blank">danken(a)redhat.com</a>&gt; =
wrote:<o:p></o:p></span></p><p class=3DMsoNormal><span
lang=3DEN-US>On =
Mon, Aug 01, 2016 at 02:02:52PM +0800, lifuqiong wrote:<br>> Hi, I =
upgrade my ovirt to version 4.0.2.2, how to using ovs in this =
version?<br>> Is there any instruction? Thank you<br><br>Please
note =
and note well: OVS is not production-grade yet. It is only =
a<br>preliminary tech preview, under active development.<br><br>However,
=
we'd be very happy to get your help in testing it (and =
possibly<br>fixing it, too).<br><br>When defining a new cluster, you =
should see a check box, letting you<br>select OVS for that cluster. =
<o:p></o:p></span></p><div><p
class=3DMsoNormal><span =
lang=3DEN-US><o:p> </o:p></span></p></div><div><p
=
class=3DMsoNormal><span lang=3DEN-US>To be precise, this is not a check =
box. In the Edit Cluster dialog, look at the =
"switch <o:p></o:p></span></p></div><div><p
=
class=3DMsoNormal><span lang=3DEN-US>type" option, and change =
"LEGACY" to =
"OVS".<o:p></o:p></span></p></div><div><p
=
class=3DMsoNormal><span =
lang=3DEN-US><o:p> </o:p></span></p></div><div><p
=
class=3DMsoNormal><span =
lang=3DEN-US><o:p> </o:p></span></p></div><div><p
=
class=3DMsoNormal><span =
lang=3DEN-US> <o:p></o:p></span></p></div><blockquote
=
style=3D'border:none;border-left:solid #CCCCCC 1.0pt;padding:0cm 0cm 0cm =
6.0pt;margin-left:4.8pt;margin-right:0cm'><p class=3DMsoNormal><span =
lang=3DEN-US>After being checked, each VM network that<br>is defined in =
your cluster would be implemented with OVS instead of<br>Linux =
bridge.<br><br>As aluded before, there are plenty of known definciencies =
(e.g., no<br>persistence of ip config on VM network, no live migration, =
not all bond<br>modes, etc etc). But do not hesitate to raise other =
issues with the<br>devel mailing list.<br><br>Happy =
testing!<br><br>Dan.<br>_______________________________________________<b=
r>Devel mailing list<br><a =
href=3D"mailto:Devel@ovirt.org">Devel@ovirt.org</a><br><a =
href=3D"http://lists.ovirt.org/mailman/listinfo/devel" =
target=3D"_blank">http://lists.ovirt.org/mailman/listinfo/de...
/o:p></span></p></blockquote></div><p
class=3DMsoNormal><span =
lang=3DEN-US><o:p> </o:p></span></p></div></div></div></body></html>
------=_NextPart_000_00C5_01D1ECB7.2CD482F0--
1:37 a.m.
New subject: [ovirt-devel] How to add ovs-based VM in version 4.0.2? Thank you
On Tue, Aug 2, 2016 at 7:12 AM, lifuqiong <lifuqiong(a)cncloudsec.com> wrote:
I create a cluster which already enabled ovs network as you mentioned
,
but when I create vm in this cluster, I can only using ovirtmgmt/ovirtmgmt
vNIC profile, which is still a Linux bridge.
I found no way to add a OVS vNIC profile, I have to chose
ovirtmgmt/ovirtmgmt vNIC to setup a VM. After VM is started, the vm is
still using Linux bridge to communicate with outside, not the ovs.
Need I to create a ovs bridge or vport and bind it to physical NIC in vdsm
manually?
Hope your reply as soon as possible.
Thank you
Mark
*发件人:* users-bounces(a)ovirt.org [mailto:users-bounces@ovirt.org] *代表 *Meni
Yakove
*发送时间:* 2016年8月1日 16:42
*收件人:* Dan Kenigsberg
*主题:* Re: [ovirt-users] [ovirt-devel] How to add ovs-based VM in version
4.0.2? Thank you
On Mon, Aug 1, 2016 at 11:07 AM, Dan Kenigsberg <danken(a)redhat.com> wrote:
On Mon, Aug 01, 2016 at 02:02:52PM +0800, lifuqiong wrote:
> Hi, I upgrade my ovirt to version 4.0.2.2, how to using ovs in this
version?
> Is there any instruction? Thank you
Please note and note well: OVS is not production-grade yet. It is only a
preliminary tech preview, under active development.
However, we'd be very happy to get your help in testing it (and possibly
fixing it, too).
When defining a new cluster, you should see a check box, letting you
select OVS for that cluster.
To be precise, this is not a check box. In the Edit Cluster dialog, look
at the "switch
type" option, and change "LEGACY" to "OVS".
After being checked, each VM network that
is defined in your cluster would be implemented with OVS instead of
Linux bridge.
As aluded before, there are plenty of known definciencies (e.g., no
persistence of ip config on VM network, no live migration, not all bond
modes, etc etc). But do not hesitate to raise other issues with the
devel mailing list.
Happy testing!
Dan.
_______________________________________________
Devel mailing list
Devel(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/devel
3:01 a.m.
New subject: [ovirt-devel] How to add ovs-based VM in version 4.0.2? Thank you
Hi ,
Did you synced network/s after you moved the host to the ovs type cluster?
It seems like you didn't..)
Go to 'Hosts' main tab' and choose the host, go to 'Network
Interfaces' sub
tab and press the 'Sync All Networks' , now the networks should be synced
to host as ovs switch type.
Run the vm and check the xml.
It should look something like this:
<source bridge='vdsmbr_nRL3asDq'/>
<virtualport type='openvswitch'>
thanks
On Tue, Aug 2, 2016 at 9:37 AM, Meni Yakove <myakove(a)redhat.com> wrote:
On Tue, Aug 2, 2016 at 7:12 AM, lifuqiong <lifuqiong(a)cncloudsec.com>
wrote:
> I create a cluster which already enabled ovs network as you mentioned ,
> but when I create vm in this cluster, I can only using ovirtmgmt/ovirtmgmt
> vNIC profile, which is still a Linux bridge.
>
> I found no way to add a OVS vNIC profile, I have to chose
> ovirtmgmt/ovirtmgmt vNIC to setup a VM. After VM is started, the vm is
> still using Linux bridge to communicate with outside, not the ovs.
>
>
>
> Need I to create a ovs bridge or vport and bind it to physical NIC in
> vdsm manually?
>
>
>
> Hope your reply as soon as possible.
>
> Thank you
>
> Mark
>
>
>
> *发件人:* users-bounces(a)ovirt.org [mailto:users-bounces@ovirt.org] *代表 *Meni
> Yakove
> *发送时间:* 2016年8月1日 16:42
> *收件人:* Dan Kenigsberg
> *主题:* Re: [ovirt-users] [ovirt-devel] How to add ovs-based VM in version
> 4.0.2? Thank you
>
>
>
> On Mon, Aug 1, 2016 at 11:07 AM, Dan Kenigsberg <danken(a)redhat.com>
> wrote:
>
> On Mon, Aug 01, 2016 at 02:02:52PM +0800, lifuqiong wrote:
> > Hi, I upgrade my ovirt to version 4.0.2.2, how to using ovs in this
> version?
> > Is there any instruction? Thank you
>
> Please note and note well: OVS is not production-grade yet. It is only a
> preliminary tech preview, under active development.
>
> However, we'd be very happy to get your help in testing it (and possibly
> fixing it, too).
>
> When defining a new cluster, you should see a check box, letting you
> select OVS for that cluster.
>
>
>
> To be precise, this is not a check box. In the Edit Cluster dialog, look
> at the "switch
>
> type" option, and change "LEGACY" to "OVS".
>
>
>
>
>
>
>
> After being checked, each VM network that
> is defined in your cluster would be implemented with OVS instead of
> Linux bridge.
>
> As aluded before, there are plenty of known definciencies (e.g., no
> persistence of ip config on VM network, no live migration, not all bond
> modes, etc etc). But do not hesitate to raise other issues with the
> devel mailing list.
>
> Happy testing!
>
> Dan.
> _______________________________________________
> Devel mailing list
> Devel(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/devel
>
>
>
--
Michael Burman
RedHat Israel, RHEV-M QE Network Team
Mobile: 054-5355725
IRC: mburman
5:28 a.m.
New subject: [ovirt-devel] How to add ovs-based VM in version 4.0.2? Thank you
If the host was a part of legacy cluster you must do manual cleanup of
all networks. Currently VDSM cannot change Linux bridges into OVS ones
(this will be implemented soon). Make sure that you are adding clean
hosts (with NIC interface/s only) to OVS cluster.
Regards,
Petr
2016-08-02 10:01 GMT+02:00 Michael Burman <mburman(a)redhat.com>:
Hi ,
Did you synced network/s after you moved the host to the ovs type cluster?
It seems like you didn't..)
Go to 'Hosts' main tab' and choose the host, go to 'Network
Interfaces' sub
tab and press the 'Sync All Networks' , now the networks should be synced to
host as ovs switch type.
Run the vm and check the xml.
It should look something like this:
<source bridge='vdsmbr_nRL3asDq'/>
<virtualport type='openvswitch'>
thanks
On Tue, Aug 2, 2016 at 9:37 AM, Meni Yakove <myakove(a)redhat.com> wrote:
>
>
>
> On Tue, Aug 2, 2016 at 7:12 AM, lifuqiong <lifuqiong(a)cncloudsec.com>
> wrote:
>>
>> I create a cluster which already enabled ovs network as you mentioned ,
>> but when I create vm in this cluster, I can only using ovirtmgmt/ovirtmgmt
>> vNIC profile, which is still a Linux bridge.
>>
>> I found no way to add a OVS vNIC profile, I have to chose
>> ovirtmgmt/ovirtmgmt vNIC to setup a VM. After VM is started, the vm is still
>> using Linux bridge to communicate with outside, not the ovs.
>>
>>
>>
>> Need I to create a ovs bridge or vport and bind it to physical NIC in
>> vdsm manually?
>>
>>
>>
>> Hope your reply as soon as possible.
>>
>> Thank you
>>
>> Mark
>>
>>
>>
>> 发件人: users-bounces(a)ovirt.org [mailto:users-bounces@ovirt.org] 代表 Meni
>> Yakove
>> 发送时间: 2016年8月1日 16:42
>> 收件人: Dan Kenigsberg
>> 主题: Re: [ovirt-users] [ovirt-devel] How to add ovs-based VM in version
>> 4.0.2? Thank you
>>
>>
>>
>> On Mon, Aug 1, 2016 at 11:07 AM, Dan Kenigsberg <danken(a)redhat.com>
>> wrote:
>>
>> On Mon, Aug 01, 2016 at 02:02:52PM +0800, lifuqiong wrote:
>> > Hi, I upgrade my ovirt to version 4.0.2.2, how to using ovs in this
>> > version?
>> > Is there any instruction? Thank you
>>
>> Please note and note well: OVS is not production-grade yet. It is only a
>> preliminary tech preview, under active development.
>>
>> However, we'd be very happy to get your help in testing it (and possibly
>> fixing it, too).
>>
>> When defining a new cluster, you should see a check box, letting you
>> select OVS for that cluster.
>>
>>
>>
>> To be precise, this is not a check box. In the Edit Cluster dialog, look
>> at the "switch
>>
>> type" option, and change "LEGACY" to "OVS".
>>
>>
>>
>>
>>
>>
>>
>> After being checked, each VM network that
>> is defined in your cluster would be implemented with OVS instead of
>> Linux bridge.
>>
>> As aluded before, there are plenty of known definciencies (e.g., no
>> persistence of ip config on VM network, no live migration, not all bond
>> modes, etc etc). But do not hesitate to raise other issues with the
>> devel mailing list.
>>
>> Happy testing!
>>
>> Dan.
>> _______________________________________________
>> Devel mailing list
>> Devel(a)ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/devel
>>
>>
>
>
--
Michael Burman
RedHat Israel, RHEV-M QE Network Team
Mobile: 054-5355725
IRC: mburman
3038
days inactive
3038
days old
3 comments
4 participants
participants (4)
-
lifuqiong -
Meni Yakove -
Michael Burman -
Petr Horacek