12:12 p.m.
Hello,
on F19 I upgraded engine from 3..3.4 to 3.4.0.
Then
yum update ovirt-engine-dwh ovirt-engine-reports
...
Running transaction
Installing : ovirt-engine-dwh-setup-3.4.0-2.fc19.noarch
1/8
Installing : ovirt-engine-reports-setup-3.4.0-2.fc19.noarch
2/8
Updating : jasperreports-server-5.5.0-7.fc19.noarch
3/8
Updating : ovirt-engine-reports-3.4.0-2.fc19.noarch
4/8
Updating : ovirt-engine-dwh-3.4.0-2.fc19.noarch
5/8
Cleanup : ovirt-engine-reports-3.3.4-1.fc19.noarch
6/8
Cleanup : jasperreports-server-5.5.0-1.noarch
7/8
Cleanup : ovirt-engine-dwh-3.3.4-1.fc19.noarch
8/8
Verifying : jasperreports-server-5.5.0-7.fc19.noarch
1/8
Verifying : ovirt-engine-reports-setup-3.4.0-2.fc19.noarch
2/8
Verifying : ovirt-engine-dwh-setup-3.4.0-2.fc19.noarch
3/8
Verifying : ovirt-engine-dwh-3.4.0-2.fc19.noarch
4/8
Verifying : ovirt-engine-reports-3.4.0-2.fc19.noarch
5/8
Verifying : jasperreports-server-5.5.0-1.noarch
6/8
Verifying : ovirt-engine-reports-3.3.4-1.fc19.noarch
7/8
Verifying : ovirt-engine-dwh-3.3.4-1.fc19.noarch
8/8
Dependency Installed:
ovirt-engine-dwh-setup.noarch 0:3.4.0-2.fc19
ovirt-engine-reports-setup.noarch 0:3.4.0-2.fc19
Updated:
ovirt-engine-dwh.noarch 0:3.4.0-2.fc19
ovirt-engine-reports.noarch 0:3.4.0-2.fc19
Dependency Updated:
jasperreports-server.noarch 0:5.5.0-7.fc19
Complete!
But now I see I have neither ovirt-engine-dwh-setup nor
ovirt-engine-reports.setup as in 3.3.4...
What to do?
I only see this thread
http://lists.ovirt.org/pipermail/users/2014-March/022205.html
and other infos that suggests for new installation engine-setup should
care about dwh too (but I don't know for reports...)
What about pre-existing 3.3.4 installations with dwh and reports?
The engine-setup for upgrade from 3.3.4 to 3.4 didn't notice anything
about dwh/reports and didn't update any package:
--== CONFIGURATION PREVIEW ==--
Engine database name : engine
Engine database secured connection : False
Engine database host : localhost
Engine database user name : engine
Engine database host name validation : False
Engine database port : 5432
NFS setup : True
Firewall manager : iptables
Update Firewall : True
Configure WebSocket Proxy : True
Host FQDN : tekkaman.localdomain.local
NFS mount point : /ISO
Set application as default page : True
Configure Apache SSL : False
Require packages rollback : False
Upgrade packages : True
Please confirm installation settings (OK, Cancel) [OK]:
If I try to run engine-setup again I get
[root@tekkaman ~]# engine-setup
[ INFO ] Stage: Initializing
[ INFO ] Stage: Environment setup
Configuration files:
['/etc/ovirt-engine-setup.conf.d/10-packaging-aio.conf',
'/etc/ovirt-engine-setup.conf.d/10-packaging.conf',
'/etc/ovirt-engine-setup.conf.d/20-setup-aio.conf',
'/etc/ovirt-engine-setup.conf.d/20-setup-ovirt-post.conf']
Log file:
/var/log/ovirt-engine/setup/ovirt-engine-setup-20140405184435.log
Version: otopi-1.2.0 (otopi-1.2.0-1.fc19)
[ ERROR ] Failed to execute stage 'Environment setup': initial_value
must be unicode or None, not str
[ INFO ] Stage: Clean up
Log file is located at
/var/log/ovirt-engine/setup/ovirt-engine-setup-20140405184435.log
[ INFO ] Stage: Pre-termination
[ INFO ] Stage: Termination
[ ERROR ] Execution of setup failed
If I patch as in
http://gerrit.ovirt.org/#/c/26005/
I get
# engine-setup
[ INFO ] Stage: Initializing
[ ERROR ] Failed to execute stage 'Initializing': type object
'ConfigEnv' has no attribute 'LEGACY_REPORTS_WAR'
[ INFO ] Stage: Clean up
Log file is located at
/var/log/ovirt-engine/setup/ovirt-engine-setup-20140405190842.log
[ INFO ] Stage: Pre-termination
[ INFO ] Stage: Termination
[ ERROR ] Execution of setup failed
any hint?
Gianluca
3:43 p.m.
----- Original Message -----
From: "Gianluca Cecchi" <gianluca.cecchi(a)gmail.com>
To: "users" <users(a)ovirt.org>
Sent: Saturday, April 5, 2014 8:12:31 PM
Subject: [Users] Upgrading dwh and reports from 3.3.4 to 3.4.0?
Hello,
on F19 I upgraded engine from 3..3.4 to 3.4.0.
Then
yum update ovirt-engine-dwh ovirt-engine-reports
...
Running transaction
Installing : ovirt-engine-dwh-setup-3.4.0-2.fc19.noarch
1/8
Installing : ovirt-engine-reports-setup-3.4.0-2.fc19.noarch
2/8
Updating : jasperreports-server-5.5.0-7.fc19.noarch
3/8
Updating : ovirt-engine-reports-3.4.0-2.fc19.noarch
4/8
Updating : ovirt-engine-dwh-3.4.0-2.fc19.noarch
5/8
Cleanup : ovirt-engine-reports-3.3.4-1.fc19.noarch
6/8
Cleanup : jasperreports-server-5.5.0-1.noarch
7/8
Cleanup : ovirt-engine-dwh-3.3.4-1.fc19.noarch
8/8
Verifying : jasperreports-server-5.5.0-7.fc19.noarch
1/8
Verifying : ovirt-engine-reports-setup-3.4.0-2.fc19.noarch
2/8
Verifying : ovirt-engine-dwh-setup-3.4.0-2.fc19.noarch
3/8
Verifying : ovirt-engine-dwh-3.4.0-2.fc19.noarch
4/8
Verifying : ovirt-engine-reports-3.4.0-2.fc19.noarch
5/8
Verifying : jasperreports-server-5.5.0-1.noarch
6/8
Verifying : ovirt-engine-reports-3.3.4-1.fc19.noarch
7/8
Verifying : ovirt-engine-dwh-3.3.4-1.fc19.noarch
8/8
Dependency Installed:
ovirt-engine-dwh-setup.noarch 0:3.4.0-2.fc19
ovirt-engine-reports-setup.noarch 0:3.4.0-2.fc19
Updated:
ovirt-engine-dwh.noarch 0:3.4.0-2.fc19
ovirt-engine-reports.noarch 0:3.4.0-2.fc19
Dependency Updated:
jasperreports-server.noarch 0:5.5.0-7.fc19
Complete!
But now I see I have neither ovirt-engine-dwh-setup nor
ovirt-engine-reports.setup as in 3.3.4...
What to do?
I only see this thread
http://lists.ovirt.org/pipermail/users/2014-March/022205.html
and other infos that suggests for new installation engine-setup should
care about dwh too (but I don't know for reports...)
What about pre-existing 3.3.4 installations with dwh and reports?
The engine-setup for upgrade from 3.3.4 to 3.4 didn't notice anything
about dwh/reports and didn't update any package:
--== CONFIGURATION PREVIEW ==--
Engine database name : engine
Engine database secured connection : False
Engine database host : localhost
Engine database user name : engine
Engine database host name validation : False
Engine database port : 5432
NFS setup : True
Firewall manager : iptables
Update Firewall : True
Configure WebSocket Proxy : True
Host FQDN :
tekkaman.localdomain.local
NFS mount point : /ISO
Set application as default page : True
Configure Apache SSL : False
Require packages rollback : False
Upgrade packages : True
Please confirm installation settings (OK, Cancel) [OK]:
If I try to run engine-setup again I get
[root@tekkaman ~]# engine-setup
[ INFO ] Stage: Initializing
[ INFO ] Stage: Environment setup
Configuration files:
['/etc/ovirt-engine-setup.conf.d/10-packaging-aio.conf',
'/etc/ovirt-engine-setup.conf.d/10-packaging.conf',
'/etc/ovirt-engine-setup.conf.d/20-setup-aio.conf',
'/etc/ovirt-engine-setup.conf.d/20-setup-ovirt-post.conf']
Log file:
/var/log/ovirt-engine/setup/ovirt-engine-setup-20140405184435.log
Version: otopi-1.2.0 (otopi-1.2.0-1.fc19)
[ ERROR ] Failed to execute stage 'Environment setup': initial_value
must be unicode or None, not str
[ INFO ] Stage: Clean up
Log file is located at
/var/log/ovirt-engine/setup/ovirt-engine-setup-20140405184435.log
[ INFO ] Stage: Pre-termination
[ INFO ] Stage: Termination
[ ERROR ] Execution of setup failed
Please attach setup log, need to see where it comes from.
If I patch as in
http://gerrit.ovirt.org/#/c/26005/
You should not patch unless we find an issue, but this error is strange, as patch does
contains this variable[1]
[1]
http://gerrit.ovirt.org/#/c/26005/4/packaging/setup/ovirt_engine_setup/re...
I get
# engine-setup
[ INFO ] Stage: Initializing
[ ERROR ] Failed to execute stage 'Initializing': type object
'ConfigEnv' has no attribute 'LEGACY_REPORTS_WAR'
[ INFO ] Stage: Clean up
Log file is located at
/var/log/ovirt-engine/setup/ovirt-engine-setup-20140405190842.log
[ INFO ] Stage: Pre-termination
[ INFO ] Stage: Termination
[ ERROR ] Execution of setup failed
any hint?
Thanks!
4:45 p.m.
On Sat, Apr 5, 2014 at 10:43 PM, Alon Bar-Lev <alonbl(a)redhat.com> wrote:
>
> If I try to run engine-setup again I get
>
> [root@tekkaman ~]# engine-setup
> [ INFO ] Stage: Initializing
> [ INFO ] Stage: Environment setup
> Configuration files:
> ['/etc/ovirt-engine-setup.conf.d/10-packaging-aio.conf',
> '/etc/ovirt-engine-setup.conf.d/10-packaging.conf',
> '/etc/ovirt-engine-setup.conf.d/20-setup-aio.conf',
> '/etc/ovirt-engine-setup.conf.d/20-setup-ovirt-post.conf']
> Log file:
> /var/log/ovirt-engine/setup/ovirt-engine-setup-20140405184435.log
> Version: otopi-1.2.0 (otopi-1.2.0-1.fc19)
> [ ERROR ] Failed to execute stage 'Environment setup': initial_value
> must be unicode or None, not str
> [ INFO ] Stage: Clean up
> Log file is located at
> /var/log/ovirt-engine/setup/ovirt-engine-setup-20140405184435.log
> [ INFO ] Stage: Pre-termination
> [ INFO ] Stage: Termination
> [ ERROR ] Execution of setup failed
Please attach setup log, need to see where it comes from.
here it is:
https://drive.google.com/file/d/0BwoPbcrMv8mvMnRMSm5oTF9NRUU/edit?usp=sha...
>
> If I patch as in
> http://gerrit.ovirt.org/#/c/26005/
You should not patch unless we find an issue, but this error is strange, as patch does
contains this variable[1]
[1]
http://gerrit.ovirt.org/#/c/26005/4/packaging/setup/ovirt_engine_setup/re...
>
> I get
> # engine-setup
> [ INFO ] Stage: Initializing
> [ ERROR ] Failed to execute stage 'Initializing': type object
> 'ConfigEnv' has no attribute 'LEGACY_REPORTS_WAR'
> [ INFO ] Stage: Clean up
> Log file is located at
> /var/log/ovirt-engine/setup/ovirt-engine-setup-20140405190842.log
> [ INFO ] Stage: Pre-termination
> [ INFO ] Stage: Termination
> [ ERROR ] Execution of setup failed
>
> any hint?
Thanks!
I tried that patch because actually I also found this thread some days
ago with the same error and it was suggested to do so...
http://lists.ovirt.org/pipermail/users/2014-April/023083.html
the setup log about the run after patching is here:
https://drive.google.com/file/d/0BwoPbcrMv8mvWEc5UVV4a1BuNlk/edit?usp=sha...
Gianluca
4:54 p.m.
----- Original Message -----
From: "Gianluca Cecchi" <gianluca.cecchi(a)gmail.com>
To: "Alon Bar-Lev" <alonbl(a)redhat.com>
Cc: "users" <users(a)ovirt.org>
Sent: Sunday, April 6, 2014 12:45:51 AM
Subject: Re: [Users] Upgrading dwh and reports from 3.3.4 to 3.4.0?
On Sat, Apr 5, 2014 at 10:43 PM, Alon Bar-Lev <alonbl(a)redhat.com> wrote:
>>
>> If I try to run engine-setup again I get
>>
>> [root@tekkaman ~]# engine-setup
>> [ INFO ] Stage: Initializing
>> [ INFO ] Stage: Environment setup
>> Configuration files:
>> ['/etc/ovirt-engine-setup.conf.d/10-packaging-aio.conf',
>> '/etc/ovirt-engine-setup.conf.d/10-packaging.conf',
>> '/etc/ovirt-engine-setup.conf.d/20-setup-aio.conf',
>> '/etc/ovirt-engine-setup.conf.d/20-setup-ovirt-post.conf']
>> Log file:
>> /var/log/ovirt-engine/setup/ovirt-engine-setup-20140405184435.log
>> Version: otopi-1.2.0 (otopi-1.2.0-1.fc19)
>> [ ERROR ] Failed to execute stage 'Environment setup': initial_value
>> must be unicode or None, not str
>> [ INFO ] Stage: Clean up
>> Log file is located at
>> /var/log/ovirt-engine/setup/ovirt-engine-setup-20140405184435.log
>> [ INFO ] Stage: Pre-termination
>> [ INFO ] Stage: Termination
>> [ ERROR ] Execution of setup failed
>
> Please attach setup log, need to see where it comes from.
here it is:
https://drive.google.com/file/d/0BwoPbcrMv8mvMnRMSm5oTF9NRUU/edit?usp=sha...
This was solved in[1], be available in next z-stream.
You can manually modify it, one letter... :)
[1] http://gerrit.ovirt.org/#/c/26118/
>
>>
>> If I patch as in
>> http://gerrit.ovirt.org/#/c/26005/
>
> You should not patch unless we find an issue, but this error is strange, as
> patch does contains this variable[1]
>
> [1]
>
http://gerrit.ovirt.org/#/c/26005/4/packaging/setup/ovirt_engine_setup/re...
>
>>
>> I get
>> # engine-setup
>> [ INFO ] Stage: Initializing
>> [ ERROR ] Failed to execute stage 'Initializing': type object
>> 'ConfigEnv' has no attribute 'LEGACY_REPORTS_WAR'
>> [ INFO ] Stage: Clean up
>> Log file is located at
>> /var/log/ovirt-engine/setup/ovirt-engine-setup-20140405190842.log
>> [ INFO ] Stage: Pre-termination
>> [ INFO ] Stage: Termination
>> [ ERROR ] Execution of setup failed
>>
>> any hint?
>
> Thanks!
I tried that patch because actually I also found this thread some days
ago with the same error and it was suggested to do so...
http://lists.ovirt.org/pipermail/users/2014-April/023083.html
the setup log about the run after patching is here:
https://drive.google.com/file/d/0BwoPbcrMv8mvWEc5UVV4a1BuNlk/edit?usp=sha...
Gianluca
4:59 p.m.
On Sat, Apr 5, 2014 at 11:54 PM, Alon Bar-Lev <alonbl(a)redhat.com> wrote:
> >
> > Please attach setup log, need to see where it comes from.
>
> here it is:
> https://drive.google.com/file/d/0BwoPbcrMv8mvMnRMSm5oTF9NRUU/edit?usp=sha...
This was solved in[1], be available in next z-stream.
You can manually modify it, one letter... :)
[1] http://gerrit.ovirt.org/#/c/26118/
ok.
Are you telling me that I have to put again original
/usr/share/ovirt-engine/setup/ovirt_engine_setup/reportsconstants.py
/usr/share/ovirt-engine/setup/plugins/ovirt-engine-setup/ovirt-engine-reports/jasper/deploy.py
that I modified to apply http://gerrit.ovirt.org/#/c/26005/ and then
apply instead
http://gerrit.ovirt.org/#/c/26118/
or do I have to apply it on the current already modified environment?
Gianluca
5:02 p.m.
----- Original Message -----
From: "Gianluca Cecchi" <gianluca.cecchi(a)gmail.com>
To: "Alon Bar-Lev" <alonbl(a)redhat.com>
Cc: "users" <users(a)ovirt.org>
Sent: Sunday, April 6, 2014 12:59:19 AM
Subject: Re: [Users] Upgrading dwh and reports from 3.3.4 to 3.4.0?
On Sat, Apr 5, 2014 at 11:54 PM, Alon Bar-Lev <alonbl(a)redhat.com> wrote:
>> >
>> > Please attach setup log, need to see where it comes from.
>>
>> here it is:
>> https://drive.google.com/file/d/0BwoPbcrMv8mvMnRMSm5oTF9NRUU/edit?usp=sha...
>
> This was solved in[1], be available in next z-stream.
>
> You can manually modify it, one letter... :)
>
> [1] http://gerrit.ovirt.org/#/c/26118/
ok.
Are you telling me that I have to put again original
/usr/share/ovirt-engine/setup/ovirt_engine_setup/reportsconstants.py
/usr/share/ovirt-engine/setup/plugins/ovirt-engine-setup/ovirt-engine-reports/jasper/deploy.py
that I modified to apply http://gerrit.ovirt.org/#/c/26005/ and then
apply instead
http://gerrit.ovirt.org/#/c/26118/
or do I have to apply it on the current already modified environment?
I think you can yum reinstall ovirt-engine-dwh-setup, this should revert the changes and
then you can perform [1] change.
Gianluca
5:09 p.m.
----- Original Message -----
From: "Alon Bar-Lev" <alonbl(a)redhat.com>
To: "Gianluca Cecchi" <gianluca.cecchi(a)gmail.com>
Cc: "users" <users(a)ovirt.org>
Sent: Sunday, April 6, 2014 1:02:16 AM
Subject: Re: [Users] Upgrading dwh and reports from 3.3.4 to 3.4.0?
----- Original Message -----
> From: "Gianluca Cecchi" <gianluca.cecchi(a)gmail.com>
> To: "Alon Bar-Lev" <alonbl(a)redhat.com>
> Cc: "users" <users(a)ovirt.org>
> Sent: Sunday, April 6, 2014 12:59:19 AM
> Subject: Re: [Users] Upgrading dwh and reports from 3.3.4 to 3.4.0?
>
> On Sat, Apr 5, 2014 at 11:54 PM, Alon Bar-Lev <alonbl(a)redhat.com> wrote:
>
> >> >
> >> > Please attach setup log, need to see where it comes from.
> >>
> >> here it is:
> >>
https://drive.google.com/file/d/0BwoPbcrMv8mvMnRMSm5oTF9NRUU/edit?usp=sha...
> >
> > This was solved in[1], be available in next z-stream.
> >
> > You can manually modify it, one letter... :)
> >
> > [1] http://gerrit.ovirt.org/#/c/26118/
>
> ok.
> Are you telling me that I have to put again original
> /usr/share/ovirt-engine/setup/ovirt_engine_setup/reportsconstants.py
>
/usr/share/ovirt-engine/setup/plugins/ovirt-engine-setup/ovirt-engine-reports/jasper/deploy.py
> that I modified to apply http://gerrit.ovirt.org/#/c/26005/ and then
> apply instead
> http://gerrit.ovirt.org/#/c/26118/
> or do I have to apply it on the current already modified environment?
I think you can yum reinstall ovirt-engine-dwh-setup, this should revert the
changes and then you can perform [1] change.
Sorry... you have changed reports... so yum reinstall ovirt-engine-reports-setup will do
the revert.
>
> Gianluca
>
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
6:14 p.m.
On Sun, Apr 6, 2014 at 12:09 AM, Alon Bar-Lev <alonbl(a)redhat.com> wrote:
> I think you can yum reinstall ovirt-engine-dwh-setup, this should
revert the
> changes and then you can perform [1] change.
Sorry... you have changed reports... so yum reinstall ovirt-engine-reports-setup will do
the revert.
reverted the two backed up files and then applied the one character pathc.
Now setup proceeds but fails at this stage:
...
[ INFO ] Stage: Misc configuration
[ INFO ] Backing up database localhost:engine to
'/var/lib/ovirt-engine/backups/engine-20140406010658.a7sKzy.sql'.
[ INFO ] Updating Engine database schema
[ INFO ] Backing up database localhost:ovirt_engine_history to
'/var/lib/ovirt-engine-dwh/backups/dwh-20140406010717.D2aTFC.sql'.
[ INFO ] Creating/refreshing DWH database schema
[ INFO ] Exporting data out of Jasper
[ INFO ] Regenerating Jasper's build configuration files
[ ERROR ] Failed to execute stage 'Misc configuration': Command
'./js-ant' failed to execute
[ INFO ] Yum Performing yum transaction rollback
[ INFO ] Rolling back database schema
[ INFO ] Clearing Engine database engine
[ INFO ] Restoring Engine database engine
[ INFO ] Rolling back DWH database schema
[ INFO ] Clearing DWH database ovirt_engine_history
[ INFO ] Restoring DWH database ovirt_engine_history
[ INFO ] Stage: Clean up
Log file is located at
/var/log/ovirt-engine/setup/ovirt-engine-setup-20140406010543.log
[ INFO ] Stage: Pre-termination
[ INFO ] Stage: Termination
[ ERROR ] Execution of setup failed
Log is here:
https://drive.google.com/file/d/0BwoPbcrMv8mvSVg3dk1lcU5EbW8/edit?usp=sha...
SO I come back here:
http://lists.ovirt.org/pipermail/users/2014-April/023083.html
;-)
do I have now to try to apply again http://gerrit.ovirt.org/26005 as suggested?
BTW: the failed action above left engine down but running
systemctl start ovirt-engine
let the service up again and web admin portal usable...
Gianluca
6:25 p.m.
----- Original Message -----
From: "Gianluca Cecchi" <gianluca.cecchi(a)gmail.com>
To: "Alon Bar-Lev" <alonbl(a)redhat.com>
Cc: "users" <users(a)ovirt.org>
Sent: Sunday, April 6, 2014 2:14:43 AM
Subject: Re: [Users] Upgrading dwh and reports from 3.3.4 to 3.4.0?
On Sun, Apr 6, 2014 at 12:09 AM, Alon Bar-Lev <alonbl(a)redhat.com> wrote:
>> I think you can yum reinstall ovirt-engine-dwh-setup, this should revert
>> the
>> changes and then you can perform [1] change.
>
> Sorry... you have changed reports... so yum reinstall
> ovirt-engine-reports-setup will do the revert.
>
reverted the two backed up files and then applied the one character pathc.
Now setup proceeds but fails at this stage:
...
[ INFO ] Stage: Misc configuration
[ INFO ] Backing up database localhost:engine to
'/var/lib/ovirt-engine/backups/engine-20140406010658.a7sKzy.sql'.
[ INFO ] Updating Engine database schema
[ INFO ] Backing up database localhost:ovirt_engine_history to
'/var/lib/ovirt-engine-dwh/backups/dwh-20140406010717.D2aTFC.sql'.
[ INFO ] Creating/refreshing DWH database schema
[ INFO ] Exporting data out of Jasper
[ INFO ] Regenerating Jasper's build configuration files
[ ERROR ] Failed to execute stage 'Misc configuration': Command
'./js-ant' failed to execute
[ INFO ] Yum Performing yum transaction rollback
[ INFO ] Rolling back database schema
[ INFO ] Clearing Engine database engine
[ INFO ] Restoring Engine database engine
[ INFO ] Rolling back DWH database schema
[ INFO ] Clearing DWH database ovirt_engine_history
[ INFO ] Restoring DWH database ovirt_engine_history
[ INFO ] Stage: Clean up
Log file is located at
/var/log/ovirt-engine/setup/ovirt-engine-setup-20140406010543.log
[ INFO ] Stage: Pre-termination
[ INFO ] Stage: Termination
[ ERROR ] Execution of setup failed
Log is here:
https://drive.google.com/file/d/0BwoPbcrMv8mvSVg3dk1lcU5EbW8/edit?usp=sha...
"""
Target "gen-config-ce" does not exist in the project "buildomatic".
"""
Hmm... it should have been gen-config without the -ce.
The tags of ovirt-engine-dwh/ovirt-engine-reports are incorrect or correct but the release
misses fixes as far as I can see, so I do not know what exactly do you have... But I think
this[1] is the fix.
[1] http://gerrit.ovirt.org/#/c/25998/
SO I come back here:
http://lists.ovirt.org/pipermail/users/2014-April/023083.html
;-)
do I have now to try to apply again http://gerrit.ovirt.org/26005 as
suggested?
BTW: the failed action above left engine down but running
systemctl start ovirt-engine
let the service up again and web admin portal usable...
Yes, if there is a failure services are not automatically restarted.
Gianluca
6:50 p.m.
On Sun, Apr 6, 2014 at 1:25 AM, Alon Bar-Lev <alonbl(a)redhat.com> wrote:
"""
Target "gen-config-ce" does not exist in the project "buildomatic".
"""
Hmm... it should have been gen-config without the -ce.
The tags of ovirt-engine-dwh/ovirt-engine-reports are incorrect or correct but the
release misses fixes as far as I can see, so I do not know what exactly do you have... But
I think this[1] is the fix.
[1] http://gerrit.ovirt.org/#/c/25998/
My packages should be the official ones at the moment:
rpm -q ovirt-engine-dwh ovirt-engine-reports ovirt-engine-dwh-setup
ovirt-engine-reports-setup
ovirt-engine-dwh-3.4.0-2.fc19.noarch
ovirt-engine-reports-3.4.0-2.fc19.noarch
ovirt-engine-dwh-setup-3.4.0-2.fc19.noarch
ovirt-engine-reports-setup-3.4.0-2.fc19.noarch
hum...
tried also approach of reinstall, as I saw that some .pyc files
resulted modified after my first tried patch when I edited
reportsconstants.py and deploy.py
don't know if expected that also .pyc files are modified after
changing .py files but I had now:
# rpm -qV ovirt-engine-dwh ovirt-engine-reports ovirt-engine-dwh-setup
ovirt-engine-reports-setup
S.5....T.
/usr/share/ovirt-engine/setup/plugins/ovirt-engine-setup/ovirt-engine-dwh/legacy/config.py
--> the only one I expected
S.5....T.
/usr/share/ovirt-engine/setup/plugins/ovirt-engine-setup/ovirt-engine-dwh/legacy/config.pyc
.......T. /usr/share/ovirt-engine/setup/ovirt_engine_setup/reportsconstants.pyc
S.5....T.
/usr/share/ovirt-engine/setup/plugins/ovirt-engine-setup/ovirt-engine-reports/jasper/deploy.pyc
So
# yum reinstall ovirt-engine-dwh ovirt-engine-reports
ovirt-engine-dwh-setup ovirt-engine-reports-setup
Reinstalling:
ovirt-engine-dwh noarch
3.4.0-2.fc19 ovirt-stable 1.2
M
ovirt-engine-dwh-setup noarch
3.4.0-2.fc19 ovirt-stable 48
k
ovirt-engine-reports noarch
3.4.0-2.fc19 ovirt-stable 1.0
M
ovirt-engine-reports-setup noarch
3.4.0-2.fc19 ovirt-stable 49
k
[root@tekkaman ~]# rpm -qV ovirt-engine-dwh ovirt-engine-reports
ovirt-engine-dwh-setup ovirt-engine-reports-setup
[root@tekkaman ~]#
then applied
http://gerrit.ovirt.org/#/c/26118/
for config.py
But now I see that if I run engine-setup again it tries a fresh
install and doesn't recognize it is an already configured anvironment
(I pressed Ctrl-C at RDBMS question to avoid further problems...)
[root@tekkaman ~]# engine-setup
[ INFO ] Stage: Initializing
[ INFO ] Stage: Environment setup
Configuration files:
['/etc/ovirt-engine-setup.conf.d/10-packaging-aio.conf',
'/etc/ovirt-engine-setup.conf.d/10-packaging.conf',
'/etc/ovirt-engine-setup.conf.d/20-setup-aio.conf',
'/etc/ovirt-engine-setup.conf.d/20-setup-ovirt-post.conf']
Log file:
/var/log/ovirt-engine/setup/ovirt-engine-setup-20140406013743.log
Version: otopi-1.2.0 (otopi-1.2.0-1.fc19)
[ INFO ] Stage: Environment packages setup
[ INFO ] Stage: Programs detection
[ INFO ] Stage: Environment setup
[ INFO ] Stage: Environment customization
--== PRODUCT OPTIONS ==--
Configure Reports on this host (Yes, No) [Yes]:
--== PACKAGES ==--
[ INFO ] Checking for product updates...
[ INFO ] No product updates found
--== NETWORK CONFIGURATION ==--
[WARNING] Failed to resolve tekkaman.localdomain.local using DNS, it
can be resolved only locally
Setup can automatically configure the firewall on this system.
Note: automatic configuration of the firewall may overwrite
current settings.
Do you want Setup to configure the firewall? (Yes, No) [Yes]:
[ INFO ] iptables will be configured as firewall manager.
--== DATABASE CONFIGURATION ==--
Where is the Reports database located? (Local, Remote)
[Local]: ^C[ ERROR ] Failed to execute stage 'Environment
customization': SIG2
[ INFO ] Stage: Clean up
Log file is located at
/var/log/ovirt-engine/setup/ovirt-engine-setup-20140406013743.log
[ INFO ] Stage: Pre-termination
[ INFO ] Stage: Termination
[ ERROR ] Execution of setup failed
setup log here:
https://drive.google.com/file/d/0BwoPbcrMv8mvQnd4WGxuOENzZTg/edit?usp=sha...
Now it is time to go to sleep to be sure not to do worse... ;-)
But if you have any hint about this problem tomorrow (today actually.. ;-)
I can dig more.
Thanks again
Gianluca
7:13 p.m.
----- Original Message -----
From: "Gianluca Cecchi" <gianluca.cecchi(a)gmail.com>
To: "Alon Bar-Lev" <alonbl(a)redhat.com>
Cc: "users" <users(a)ovirt.org>
Sent: Sunday, April 6, 2014 2:50:24 AM
Subject: Re: [Users] Upgrading dwh and reports from 3.3.4 to 3.4.0?
On Sun, Apr 6, 2014 at 1:25 AM, Alon Bar-Lev <alonbl(a)redhat.com> wrote:
>
> """
> Target "gen-config-ce" does not exist in the project
"buildomatic".
> """
>
> Hmm... it should have been gen-config without the -ce.
>
> The tags of ovirt-engine-dwh/ovirt-engine-reports are incorrect or correct
> but the release misses fixes as far as I can see, so I do not know what
> exactly do you have... But I think this[1] is the fix.
>
> [1] http://gerrit.ovirt.org/#/c/25998/
My packages should be the official ones at the moment:
rpm -q ovirt-engine-dwh ovirt-engine-reports ovirt-engine-dwh-setup
ovirt-engine-reports-setup
ovirt-engine-dwh-3.4.0-2.fc19.noarch
ovirt-engine-reports-3.4.0-2.fc19.noarch
ovirt-engine-dwh-setup-3.4.0-2.fc19.noarch
ovirt-engine-reports-setup-3.4.0-2.fc19.noarch
hum...
tried also approach of reinstall, as I saw that some .pyc files
resulted modified after my first tried patch when I edited
reportsconstants.py and deploy.py
don't know if expected that also .pyc files are modified after
changing .py files but I had now:
# rpm -qV ovirt-engine-dwh ovirt-engine-reports ovirt-engine-dwh-setup
ovirt-engine-reports-setup
S.5....T.
/usr/share/ovirt-engine/setup/plugins/ovirt-engine-setup/ovirt-engine-dwh/legacy/config.py
--> the only one I expected
S.5....T.
/usr/share/ovirt-engine/setup/plugins/ovirt-engine-setup/ovirt-engine-dwh/legacy/config.pyc
.......T.
/usr/share/ovirt-engine/setup/ovirt_engine_setup/reportsconstants.pyc
S.5....T.
/usr/share/ovirt-engine/setup/plugins/ovirt-engine-setup/ovirt-engine-reports/jasper/deploy.pyc
So
# yum reinstall ovirt-engine-dwh ovirt-engine-reports
ovirt-engine-dwh-setup ovirt-engine-reports-setup
Reinstalling:
ovirt-engine-dwh noarch
3.4.0-2.fc19 ovirt-stable 1.2
M
ovirt-engine-dwh-setup noarch
3.4.0-2.fc19 ovirt-stable 48
k
ovirt-engine-reports noarch
3.4.0-2.fc19 ovirt-stable 1.0
M
ovirt-engine-reports-setup noarch
3.4.0-2.fc19 ovirt-stable 49
k
[root@tekkaman ~]# rpm -qV ovirt-engine-dwh ovirt-engine-reports
ovirt-engine-dwh-setup ovirt-engine-reports-setup
[root@tekkaman ~]#
then applied
http://gerrit.ovirt.org/#/c/26118/
for config.py
But now I see that if I run engine-setup again it tries a fresh
install and doesn't recognize it is an already configured anvironment
(I pressed Ctrl-C at RDBMS question to avoid further problems...)
[root@tekkaman ~]# engine-setup
[ INFO ] Stage: Initializing
[ INFO ] Stage: Environment setup
Configuration files:
['/etc/ovirt-engine-setup.conf.d/10-packaging-aio.conf',
'/etc/ovirt-engine-setup.conf.d/10-packaging.conf',
'/etc/ovirt-engine-setup.conf.d/20-setup-aio.conf',
'/etc/ovirt-engine-setup.conf.d/20-setup-ovirt-post.conf']
Log file:
/var/log/ovirt-engine/setup/ovirt-engine-setup-20140406013743.log
Version: otopi-1.2.0 (otopi-1.2.0-1.fc19)
[ INFO ] Stage: Environment packages setup
[ INFO ] Stage: Programs detection
[ INFO ] Stage: Environment setup
[ INFO ] Stage: Environment customization
--== PRODUCT OPTIONS ==--
Configure Reports on this host (Yes, No) [Yes]:
--== PACKAGES ==--
[ INFO ] Checking for product updates...
[ INFO ] No product updates found
--== NETWORK CONFIGURATION ==--
[WARNING] Failed to resolve tekkaman.localdomain.local using DNS, it
can be resolved only locally
Setup can automatically configure the firewall on this system.
Note: automatic configuration of the firewall may overwrite
current settings.
Do you want Setup to configure the firewall? (Yes, No) [Yes]:
[ INFO ] iptables will be configured as firewall manager.
--== DATABASE CONFIGURATION ==--
Where is the Reports database located? (Local, Remote)
[Local]: ^C[ ERROR ] Failed to execute stage 'Environment
customization': SIG2
[ INFO ] Stage: Clean up
Log file is located at
/var/log/ovirt-engine/setup/ovirt-engine-setup-20140406013743.log
[ INFO ] Stage: Pre-termination
[ INFO ] Stage: Termination
[ ERROR ] Execution of setup failed
setup log here:
https://drive.google.com/file/d/0BwoPbcrMv8mvQnd4WGxuOENzZTg/edit?usp=sha...
Now it is time to go to sleep to be sure not to do worse... ;-)
But if you have any hint about this problem tomorrow (today actually.. ;-)
I can dig more.
This is a progress... :)
Now... do you have anything at:
/usr/share/jasperreports-server/buildomatic/build_conf/default/master.properties
Do you have:
/var/lib/ovirt-engine-reports/build-conf/master.properties
Thanks again
Gianluca
2:57 a.m.
On Sun, Apr 6, 2014 at 2:13 AM, Alon Bar-Lev <alonbl(a)redhat.com> wrote:
This is a progress... :)
I have not understood in what sense, but I trust you...
Now... do you have anything at:
/usr/share/jasperreports-server/buildomatic/build_conf/default/master.properties
Do you have:
/var/lib/ovirt-engine-reports/build-conf/master.properties
yes see below. Note that I didn't complete the engine-setup process
But if this influences only my reports/dwh installation and not engine
itself is ok for me to run it again....
I suppose in case I have to drop before my preexisting reports/dwh
rdbms and so loose my previous data?
[g.cecchi@tekkaman ~]$ cat
/usr/share/jasperreports-server/buildomatic/build_conf/default/master.properties
appServerType=jboss7
# JBoss app server root dir
appServerDir=/usr/share/ovirt-engine
# database type
dbType=postgresql
# database location and connection settings
dbHost=localhost
dbPort=5432
dbUsername=engine_reports
dbPassword=<an apparently encrypted password>
# JasperServer db name
js.dbName=ovirtenginereports
# web app name
# (set one of these to deploy to a non-default war file name)
webAppNameCE=ovirt-engine-reports
# JDBC driver
# (uncomment to change to a non-default setting)
#
# driver will be found here: <path>/buildomatic/conf_source/db/postgresql/jdbc
#
# maven.jdbc.groupId=postgresql
# maven.jdbc.artifactId=postgresql
maven.jdbc.version=jdbc
# Skip JDBC Driver Deploy
# Flag used to skip JDBC driver deploying during deployment process
# (uncomment to change to a non-default setting)
deployJDBCDriver=false
[g.cecchi@tekkaman ~]$ sudo cat
/var/lib/ovirt-engine-reports/build-conf/master.properties
# File locations
reportsHome=/var/lib/ovirt-engine-reports
reportsWar=/var/lib/ovirt-engine-reports/ovirt-engine-reports.war
currentConf=/var/lib/ovirt-engine-reports/build-conf
appServerDir=/var/lib/ovirt-engine-reports
appServerType=jboss7
# database type
dbType=postgresql
# database location and connection settings
dbHost=localhost
dbPort=5432
dbUsername=engine_reports
dbPassword=<the same as above encrypted password>
js.dbName=ovirtenginereports
# web app name
# (set one of these to deploy to a non-default war file name)
webAppNameCE=ovirt-engine-reports
webAppNamePro=ovirt-engine-reports
# Database
maven.jdbc.groupId=postgresql
maven.jdbc.artifactId=postgresql
maven.jdbc.version=9.2-1002.jdbc4
deployJDBCDriver=false
3:26 a.m.
----- Original Message -----
From: "Gianluca Cecchi" <gianluca.cecchi(a)gmail.com>
To: "Alon Bar-Lev" <alonbl(a)redhat.com>
Cc: "users" <users(a)ovirt.org>
Sent: Sunday, April 6, 2014 10:57:42 AM
Subject: Re: [Users] Upgrading dwh and reports from 3.3.4 to 3.4.0?
On Sun, Apr 6, 2014 at 2:13 AM, Alon Bar-Lev <alonbl(a)redhat.com> wrote:
>
> This is a progress... :)
I have not understood in what sense, but I trust you...
>
> Now... do you have anything at:
>
> /usr/share/jasperreports-server/buildomatic/build_conf/default/master.properties
>
> Do you have:
>
> /var/lib/ovirt-engine-reports/build-conf/master.properties
yes see below. Note that I didn't complete the engine-setup process
But if this influences only my reports/dwh installation and not engine
itself is ok for me to run it again....
I suppose in case I have to drop before my preexisting reports/dwh
rdbms and so loose my previous data?
OK, this is a bug, as the /var/lib/ovirt-engine-reports/build-conf/master.properties
should been left only on success, while I see that if fail it is left, I will open a bug.
Please remove /var/lib/ovirt-engine-reports/build-conf and re-run setup should attempt to
upgrade again.
Thanks,
Alon
3:57 a.m.
On Sun, Apr 6, 2014 at 10:26 AM, Alon Bar-Lev <alonbl(a)redhat.com> wrote:
----- Original Message -----
> From: "Gianluca Cecchi" <gianluca.cecchi(a)gmail.com>
> To: "Alon Bar-Lev" <alonbl(a)redhat.com>
> Cc: "users" <users(a)ovirt.org>
> Sent: Sunday, April 6, 2014 10:57:42 AM
> Subject: Re: [Users] Upgrading dwh and reports from 3.3.4 to 3.4.0?
>
> On Sun, Apr 6, 2014 at 2:13 AM, Alon Bar-Lev <alonbl(a)redhat.com> wrote:
>
> >
> > This is a progress... :)
>
> I have not understood in what sense, but I trust you...
>
> >
> > Now... do you have anything at:
> >
> >
/usr/share/jasperreports-server/buildomatic/build_conf/default/master.properties
> >
> > Do you have:
> >
> > /var/lib/ovirt-engine-reports/build-conf/master.properties
>
> yes see below. Note that I didn't complete the engine-setup process
> But if this influences only my reports/dwh installation and not engine
> itself is ok for me to run it again....
> I suppose in case I have to drop before my preexisting reports/dwh
> rdbms and so loose my previous data?
OK, this is a bug, as the /var/lib/ovirt-engine-reports/build-conf/master.properties
should been left only on success, while I see that if fail it is left, I will open a bug.
Please remove /var/lib/ovirt-engine-reports/build-conf and re-run setup should attempt to
upgrade again.
Thanks,
Alon
ok, done. I see your opened bugzilla entry.
Now:
[ INFO ] Stage: Setup validation
During execution engine service will be stopped (OK, Cancel) [OK]:
[ INFO ] Cleaning stale zombie tasks
--== CONFIGURATION PREVIEW ==--
Engine database name : engine
Engine database secured connection : False
Engine database host : localhost
Engine database user name : engine
Engine database host name validation : False
Engine database port : 5432
NFS setup : True
Firewall manager : iptables
Update Firewall : True
Configure WebSocket Proxy : True
Host FQDN : tekkaman.localdomain.local
NFS mount point : /ISO
DWH installation : True
DWH database name : ovirt_engine_history
DWH database secured connection : False
DWH database host : localhost
DWH database user name : engine_history
DWH database host name validation : False
DWH database port : 5432
Reports installation : True
Reports database name : ovirtenginereports
Reports database secured connection : False
Reports database host : localhost
Reports database user name : engine_reports
Reports database host name validation : False
Reports database port : 5432
Please confirm installation settings (OK, Cancel) [OK]:
[ INFO ] Cleaning async tasks and compensations
[ INFO ] Checking the Engine database consistency
[ INFO ] Stage: Transaction setup
[ INFO ] Stopping engine service
[ INFO ] Stopping dwh service
[ INFO ] Stopping websocket-proxy service
[ INFO ] Stage: Misc configuration
[ INFO ] Stage: Package installation
[ INFO ] Stage: Misc configuration
[ INFO ] Backing up database localhost:engine to
'/var/lib/ovirt-engine/backups/engine-20140406105216.IjEVb2.sql'.
[ INFO ] Updating Engine database schema
[ INFO ] Backing up database localhost:ovirt_engine_history to
'/var/lib/ovirt-engine-dwh/backups/dwh-20140406105234.jk3lc9.sql'.
[ INFO ] Creating/refreshing DWH database schema
[ INFO ] Exporting data out of Jasper
[ INFO ] Regenerating Jasper's build configuration files
[ ERROR ] Failed to execute stage 'Misc configuration': Command
'./js-ant' failed to execute
[ INFO ] Yum Performing yum transaction rollback
[ INFO ] Rolling back database schema
[ INFO ] Clearing Engine database engine
[ INFO ] Restoring Engine database engine
[ INFO ] Rolling back DWH database schema
[ INFO ] Clearing DWH database ovirt_engine_history
[ INFO ] Restoring DWH database ovirt_engine_history
[ INFO ] Stage: Clean up
Log file is located at
/var/log/ovirt-engine/setup/ovirt-engine-setup-20140406105032.log
[ INFO ] Stage: Pre-termination
[ INFO ] Stage: Termination
[ ERROR ] Execution of setup failed
we come back with the problem you outlined with
BUILD FAILED
Target "gen-config-ce" does not exist in the project "buildomatic".
in setup log
see here:
https://drive.google.com/file/d/0BwoPbcrMv8mvM29QdXU2UUlHRHc/edit?usp=sha...
I suppose I have to remove again build-conf before proceedings with
other suggestions...
Gianluca
4:34 a.m.
----- Original Message -----
From: "Gianluca Cecchi" <gianluca.cecchi(a)gmail.com>
To: "Alon Bar-Lev" <alonbl(a)redhat.com>
Cc: "users" <users(a)ovirt.org>
Sent: Sunday, April 6, 2014 11:57:27 AM
Subject: Re: [Users] Upgrading dwh and reports from 3.3.4 to 3.4.0?
On Sun, Apr 6, 2014 at 10:26 AM, Alon Bar-Lev <alonbl(a)redhat.com> wrote:
>
>
> ----- Original Message -----
>> From: "Gianluca Cecchi" <gianluca.cecchi(a)gmail.com>
>> To: "Alon Bar-Lev" <alonbl(a)redhat.com>
>> Cc: "users" <users(a)ovirt.org>
>> Sent: Sunday, April 6, 2014 10:57:42 AM
>> Subject: Re: [Users] Upgrading dwh and reports from 3.3.4 to 3.4.0?
>>
>> On Sun, Apr 6, 2014 at 2:13 AM, Alon Bar-Lev <alonbl(a)redhat.com> wrote:
>>
>> >
>> > This is a progress... :)
>>
>> I have not understood in what sense, but I trust you...
>>
>> >
>> > Now... do you have anything at:
>> >
>> >
/usr/share/jasperreports-server/buildomatic/build_conf/default/master.properties
>> >
>> > Do you have:
>> >
>> > /var/lib/ovirt-engine-reports/build-conf/master.properties
>>
>> yes see below. Note that I didn't complete the engine-setup process
>> But if this influences only my reports/dwh installation and not engine
>> itself is ok for me to run it again....
>> I suppose in case I have to drop before my preexisting reports/dwh
>> rdbms and so loose my previous data?
>
> OK, this is a bug, as the
> /var/lib/ovirt-engine-reports/build-conf/master.properties should been
> left only on success, while I see that if fail it is left, I will open a
> bug.
>
> Please remove /var/lib/ovirt-engine-reports/build-conf and re-run setup
> should attempt to upgrade again.
>
> Thanks,
> Alon
ok, done. I see your opened bugzilla entry.
Now:
[ INFO ] Stage: Setup validation
During execution engine service will be stopped (OK, Cancel) [OK]:
[ INFO ] Cleaning stale zombie tasks
--== CONFIGURATION PREVIEW ==--
Engine database name : engine
Engine database secured connection : False
Engine database host : localhost
Engine database user name : engine
Engine database host name validation : False
Engine database port : 5432
NFS setup : True
Firewall manager : iptables
Update Firewall : True
Configure WebSocket Proxy : True
Host FQDN :
tekkaman.localdomain.local
NFS mount point : /ISO
DWH installation : True
DWH database name : ovirt_engine_history
DWH database secured connection : False
DWH database host : localhost
DWH database user name : engine_history
DWH database host name validation : False
DWH database port : 5432
Reports installation : True
Reports database name : ovirtenginereports
Reports database secured connection : False
Reports database host : localhost
Reports database user name : engine_reports
Reports database host name validation : False
Reports database port : 5432
Please confirm installation settings (OK, Cancel) [OK]:
[ INFO ] Cleaning async tasks and compensations
[ INFO ] Checking the Engine database consistency
[ INFO ] Stage: Transaction setup
[ INFO ] Stopping engine service
[ INFO ] Stopping dwh service
[ INFO ] Stopping websocket-proxy service
[ INFO ] Stage: Misc configuration
[ INFO ] Stage: Package installation
[ INFO ] Stage: Misc configuration
[ INFO ] Backing up database localhost:engine to
'/var/lib/ovirt-engine/backups/engine-20140406105216.IjEVb2.sql'.
[ INFO ] Updating Engine database schema
[ INFO ] Backing up database localhost:ovirt_engine_history to
'/var/lib/ovirt-engine-dwh/backups/dwh-20140406105234.jk3lc9.sql'.
[ INFO ] Creating/refreshing DWH database schema
[ INFO ] Exporting data out of Jasper
[ INFO ] Regenerating Jasper's build configuration files
[ ERROR ] Failed to execute stage 'Misc configuration': Command
'./js-ant' failed to execute
[ INFO ] Yum Performing yum transaction rollback
[ INFO ] Rolling back database schema
[ INFO ] Clearing Engine database engine
[ INFO ] Restoring Engine database engine
[ INFO ] Rolling back DWH database schema
[ INFO ] Clearing DWH database ovirt_engine_history
[ INFO ] Restoring DWH database ovirt_engine_history
[ INFO ] Stage: Clean up
Log file is located at
/var/log/ovirt-engine/setup/ovirt-engine-setup-20140406105032.log
[ INFO ] Stage: Pre-termination
[ INFO ] Stage: Termination
[ ERROR ] Execution of setup failed
we come back with the problem you outlined with
BUILD FAILED
Target "gen-config-ce" does not exist in the project "buildomatic".
in setup log
see here:
https://drive.google.com/file/d/0BwoPbcrMv8mvM29QdXU2UUlHRHc/edit?usp=sha...
I suppose I have to remove again build-conf before proceedings with
other suggestions...
You need to remove and apply this[1] to fix that problem, I thought you applied it.
[1] http://gerrit.ovirt.org/#/c/25998/
Gianluca
7:43 a.m.
On Sun, Apr 6, 2014 at 11:34 AM, Alon Bar-Lev <alonbl(a)redhat.com> wrote:
You need to remove and apply this[1] to fix that problem, I thought you applied it.
[1] http://gerrit.ovirt.org/#/c/25998/
>
> Gianluca
>
Ah ok, right. I forgot that.
Now all ended ok (see below)
I see that now the user is defined into the db instead of palin file as in 3.3.
ovirtenginereports=# select * from jiuser;
id | username | tenantid | fullname | emailaddress |
password | externallydefined | enable
d | previouspasswordchangetime
-----+---------------+----------+------------------+--------------+----------------------------------+-------------------+-------
--+----------------------------
5 | jasperadmin | 1 | jasperadmin User | |
349AFAADD5C5A2BD477309618DCD58B9 | f | f
| 2013-10-17 00:58:10.01
6 | anonymousUser | 1 | anonymousUser | |
CF35D2E88192D6EB | f | f
| 2013-10-17 00:58:10.346
129 | ovirt-admin | 1 | ovirt-admin | |
D41B13B925B503A13CF5EBB35EB9BFF7 | f | t
|
130 | admin | 1 | admin | |
5C598ADA6CCE35AA | f | f
|
(4 rows)
How can I reset the password of ovirt-admin?
(previously I used it only at certain times and watched the clear text file
/usr/share/ovirt-engine-reports/reports/users/ovirt-002dadmin.xml
I forgot it ;-)
)
so that I can try and check previous data?
At the end of the e-mail what I wrote as a summary and if right I can
add into release notes...
...
Please confirm installation settings (OK, Cancel) [OK]:
[ INFO ] Cleaning async tasks and compensations
[ INFO ] Checking the Engine database consistency
[ INFO ] Stage: Transaction setup
[ INFO ] Stopping engine service
[ INFO ] Stopping dwh service
[ INFO ] Stopping websocket-proxy service
[ INFO ] Stage: Misc configuration
[ INFO ] Stage: Package installation
[ INFO ] Stage: Misc configuration
[ INFO ] Backing up database localhost:engine to
'/var/lib/ovirt-engine/backups/engine-20140406140343.eSKtje.sql'.
[ INFO ] Updating Engine database schema
[ INFO ] Backing up database localhost:ovirt_engine_history to
'/var/lib/ovirt-engine-dwh/backups/dwh-20140406140401.A6N4NM.sql'.
[ INFO ] Creating/refreshing DWH database schema
[ INFO ] Regenerating Jasper's build configuration files
[ INFO ] Exporting data out of Jasper
[ INFO ] Backing up database localhost:ovirtenginereports to
'/var/lib/ovirt-engine-reports/backups/reports-20140406140547.a7FquY.sql'.
[ INFO ] Deploying Jasper
[ INFO ] Importing data into Jasper
[ INFO ] Configuring Jasper Java resources
[ INFO ] Configuring Jasper Database resources
[ INFO ] Customizing Jasper
[ INFO ] Customizing Jasper metadata
[ INFO ] Generating post install configuration file
'/etc/ovirt-engine-setup.conf.d/20-setup-ovirt-post.conf'
[ INFO ] Stage: Transaction commit
[ INFO ] Stage: Closing up
--== SUMMARY ==--
SSH fingerprint: FE:C6:E1:DE:5D:44:DC:30:CB:12:A3:F7:01:3A:49:83
Internal CA
55:D5:F1:1F:1A:65:45:61:D5:17:A5:74:36:84:65:3B:E5:53:6E:84
Web access is enabled at:
http://tekkaman.localdomain.local:80/ovirt-engine
https://tekkaman.localdomain.local:443/ovirt-engine
--== END OF SUMMARY ==--
[ INFO ] Starting engine service
[ INFO ] Restarting httpd
[ INFO ] Restarting nfs services
[ INFO ] Starting dwh service
[ INFO ] Generating answer file
'/var/lib/ovirt-engine/setup/answers/20140406140949-setup.conf'
[ INFO ] Stage: Clean up
Log file is located at
/var/log/ovirt-engine/setup/ovirt-engine-setup-20140406140253.log
[ INFO ] Stage: Pre-termination
[ INFO ] Stage: Termination
[ INFO ] Execution of setup completed successfully
The workflow for upgrade from configured 3.3 dwh and reports should be this
Coming from a 3.3.4 with dwh and reports already configured, in my
case I start with
ovirt-engine-dwh-3.3.4-1.fc19.noarch
ovirt-engine-reports-3.3.4-1.fc19.noarch
after first tun of engine-setup, that updates only engine itself you have to:
1) yum update
and you will get
ovirt-engine-dwh-3.4.0-2.fc19.noarch
ovirt-engine-reports-3.4.0-2.fc19.noarch
and also these 2 new packages installed
ovirt-engine-dwh-setup-3.4.0-2.fc19.noarch
ovirt-engine-reports-setup-3.4.0-2.fc19.noarch
2) patch as from
http://gerrit.ovirt.org/#/c/26118/
and
http://gerrit.ovirt.org/#/c/25998/
3) engine-setup
(no more ovirt-engine-dwh-setup and ovirt-engine-reports-setup to run)
And if you have run 3) before 2) you have to remove the directory tree under
/var/lib/ovirt-engine-reports/build-conf
and run 2) and 3) again
due to currently targeted for 3.4.1 bug:
https://bugzilla.redhat.com/show_bug.cgi?id=1084749
Gianluca
8:37 a.m.
----- Original Message -----
From: "Gianluca Cecchi" <gianluca.cecchi(a)gmail.com>
To: "Alon Bar-Lev" <alonbl(a)redhat.com>
Cc: "users" <users(a)ovirt.org>
Sent: Sunday, April 6, 2014 3:43:09 PM
Subject: Re: [Users] Upgrading dwh and reports from 3.3.4 to 3.4.0?
On Sun, Apr 6, 2014 at 11:34 AM, Alon Bar-Lev <alonbl(a)redhat.com> wrote:
>
> You need to remove and apply this[1] to fix that problem, I thought you
> applied it.
>
> [1] http://gerrit.ovirt.org/#/c/25998/
>
>>
>> Gianluca
>>
Ah ok, right. I forgot that.
Now all ended ok (see below)
I see that now the user is defined into the db instead of palin file as in
3.3.
Great.
How can I reset the password of ovirt-admin?
(previously I used it only at certain times and watched the clear text file
/usr/share/ovirt-engine-reports/reports/users/ovirt-002dadmin.xml
I forgot it ;-)
I think you can run:
# engine-setup
--otopi-environment="OVESETUP_REPORTS_CONFIG/adminPassword=str:<password>"
Or interactively:
# engine-setup
--otopi-environment="OVESETUP_REPORTS_CONFIG/adminPassword=none:"
so that I can try and check previous data?
At the end of the e-mail what I wrote as a summary and if right I can
add into release notes...
Well, better to wait for 3.4.1 I think.
after first tun of engine-setup, that updates only engine itself you have to:
1) yum update
and you will get
ovirt-engine-dwh-3.4.0-2.fc19.noarch
ovirt-engine-reports-3.4.0-2.fc19.noarch
and also these 2 new packages installed
ovirt-engine-dwh-setup-3.4.0-2.fc19.noarch
ovirt-engine-reports-setup-3.4.0-2.fc19.noarch
2) patch as from
http://gerrit.ovirt.org/#/c/26118/
and
http://gerrit.ovirt.org/#/c/25998/
3) engine-setup
(no more ovirt-engine-dwh-setup and ovirt-engine-reports-setup to run)
And if you have run 3) before 2) you have to remove the directory tree under
/var/lib/ovirt-engine-reports/build-conf
and run 2) and 3) again
due to currently targeted for 3.4.1 bug:
https://bugzilla.redhat.com/show_bug.cgi?id=1084749
Thank you for your help!
Alon.
8:38 a.m.
----- Original Message -----
From: "Alon Bar-Lev" <alonbl(a)redhat.com>
To: "Gianluca Cecchi" <gianluca.cecchi(a)gmail.com>
Cc: "users" <users(a)ovirt.org>
Sent: Sunday, April 6, 2014 4:37:01 PM
Subject: Re: [Users] Upgrading dwh and reports from 3.3.4 to 3.4.0?
----- Original Message -----
> From: "Gianluca Cecchi" <gianluca.cecchi(a)gmail.com>
> To: "Alon Bar-Lev" <alonbl(a)redhat.com>
> Cc: "users" <users(a)ovirt.org>
> Sent: Sunday, April 6, 2014 3:43:09 PM
> Subject: Re: [Users] Upgrading dwh and reports from 3.3.4 to 3.4.0?
>
> On Sun, Apr 6, 2014 at 11:34 AM, Alon Bar-Lev <alonbl(a)redhat.com> wrote:
>
> >
> > You need to remove and apply this[1] to fix that problem, I thought you
> > applied it.
> >
> > [1] http://gerrit.ovirt.org/#/c/25998/
> >
> >>
> >> Gianluca
> >>
>
> Ah ok, right. I forgot that.
> Now all ended ok (see below)
> I see that now the user is defined into the db instead of palin file as in
> 3.3.
Great.
> How can I reset the password of ovirt-admin?
> (previously I used it only at certain times and watched the clear text file
> /usr/share/ovirt-engine-reports/reports/users/ovirt-002dadmin.xml
> I forgot it ;-)
I think you can run:
# engine-setup
--otopi-environment="OVESETUP_REPORTS_CONFIG/adminPassword=str:<password>"
Or interactively:
# engine-setup
--otopi-environment="OVESETUP_REPORTS_CONFIG/adminPassword=none:"
ּSorry, interactive will not work if there is existing installation.
> so that I can try and check previous data?
> At the end of the e-mail what I wrote as a summary and if right I can
> add into release notes...
Well, better to wait for 3.4.1 I think.
>
> after first tun of engine-setup, that updates only engine itself you have
> to:
>
> 1) yum update
> and you will get
> ovirt-engine-dwh-3.4.0-2.fc19.noarch
> ovirt-engine-reports-3.4.0-2.fc19.noarch
>
> and also these 2 new packages installed
> ovirt-engine-dwh-setup-3.4.0-2.fc19.noarch
> ovirt-engine-reports-setup-3.4.0-2.fc19.noarch
>
> 2) patch as from
> http://gerrit.ovirt.org/#/c/26118/
> and
> http://gerrit.ovirt.org/#/c/25998/
>
> 3) engine-setup
> (no more ovirt-engine-dwh-setup and ovirt-engine-reports-setup to run)
>
> And if you have run 3) before 2) you have to remove the directory tree
> under
> /var/lib/ovirt-engine-reports/build-conf
> and run 2) and 3) again
> due to currently targeted for 3.4.1 bug:
> https://bugzilla.redhat.com/show_bug.cgi?id=1084749
Thank you for your help!
Alon.
9:01 a.m.
On Sun, Apr 6, 2014 at 3:37 PM, Alon Bar-Lev <alonbl(a)redhat.com> wrote:
> How can I reset the password of ovirt-admin?
> (previously I used it only at certain times and watched the clear text file
> /usr/share/ovirt-engine-reports/reports/users/ovirt-002dadmin.xml
> I forgot it ;-)
I think you can run:
# engine-setup
--otopi-environment="OVESETUP_REPORTS_CONFIG/adminPassword=str:<password>"
the command went ok but not able to login with ovirt-admin.
And the select from db gives the same encrypted password for
ovirt-admin user, so I think it din't change the password.
suppose my password is the word changeme I used the command
engine-setup
--otopi-environment="OVESETUP_REPORTS_CONFIG/adminPassword=str:changeme"
is it ok?
Also, it would be nice not to stop/reconfigure/start the whole engine
only to change reports password....
> At the end of the e-mail what I wrote as a summary and if right I
can
> add into release notes...
Well, better to wait for 3.4.1 I think.
OK, but I think something needs to be written into release notes for 3.4.
In fact at the moment you see this kind of index:
https://drive.google.com/file/d/0BwoPbcrMv8mvQTlQQU8zdVdDeDQ/edit?usp=sha...
but actually there is no reference at all to reports and dwh and
anyone who wants to setup and/or upgrade them would retain more than a
doubt...
Thank you for your help!
Alon.
To tell it with Kevin Spacey words in his great film:
When someone does you a big favor, don't pay it back... pay it forward
I think it could be valid in IT too... not only in real life ;-)
My forward will be to sponsor oVirt...
9:08 a.m.
----- Original Message -----
From: "Gianluca Cecchi" <gianluca.cecchi(a)gmail.com>
To: "Alon Bar-Lev" <alonbl(a)redhat.com>
Cc: "users" <users(a)ovirt.org>
Sent: Sunday, April 6, 2014 5:01:19 PM
Subject: Re: [Users] Upgrading dwh and reports from 3.3.4 to 3.4.0?
On Sun, Apr 6, 2014 at 3:37 PM, Alon Bar-Lev <alonbl(a)redhat.com> wrote:
>
>> How can I reset the password of ovirt-admin?
>> (previously I used it only at certain times and watched the clear text
>> file
>> /usr/share/ovirt-engine-reports/reports/users/ovirt-002dadmin.xml
>> I forgot it ;-)
>
> I think you can run:
>
> # engine-setup
>
--otopi-environment="OVESETUP_REPORTS_CONFIG/adminPassword=str:<password>"
the command went ok but not able to login with ovirt-admin.
And the select from db gives the same encrypted password for
ovirt-admin user, so I think it din't change the password.
Well, there may be shortcuts... using jasper magics.
suppose my password is the word changeme I used the command
engine-setup
--otopi-environment="OVESETUP_REPORTS_CONFIG/adminPassword=str:changeme"
is it ok?
Also, it would be nice not to stop/reconfigure/start the whole engine
only to change reports password....
Yes, can you please send me log file? I would like to see what happens, as far as I can
see if this variable contain anything it should be put into database.
Alon
3885
days inactive
3886
days old
19 comments
2 participants
participants (2)
-
Alon Bar-Lev -
Gianluca Cecchi