2:58 a.m.
Hello,
today I wanted to test a single host hci install using
ovirt-node-ng-installer-4.4.1-2020071311.el8.iso
On this same environment 4.4.0 gui wizard worked ok, apart a final problem
with cpu flags and final engine boot up, so I wanted to verify if all is ok
now, because that problem should have been fixed
But I incurred in the same problems recently discussed here:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/3AARZD4VBNN...
The first part failed because of
TASK [gluster.infra/roles/backend_setup : Change to Install lvm tools for
RHEL systems.] ***
fatal: [novirt2st.storage.local]: FAILED! => {"changed": false,
"msg": "The
Python 2 yum module is needed for this module. If you require Python 3
support use the `dnf` Ansible module instead."}
To have the first stage work (now I have to continue with the "Continue to
Hosted Engine Deployment" step) I have to modify:
- /etc/ansible/roles/gluster.infra/roles/backend_setup/tasks/main.yml
force to use dnf as package manager. For some reason not automatically
detected by the "package" ansible module
from
- name: Change to Install lvm tools for RHEL systems.
package:
name: device-mapper-persistent-data
state: present
when: ansible_os_family == 'RedHat'
to
- name: Change to Install lvm tools for RHEL systems.
package:
name: device-mapper-persistent-data
state: present
use: dnf
when: ansible_os_family == 'RedHat'
- /etc/ansible/roles/gluster.infra/roles/backend_setup/tasks/vdo_create.yml
change from yum to package and specify to use dnf
from:
- name: Install VDO dependencies
#maybe use package module?
yum:
name: "{{ packages }}"
register: vdo_deps
...
to:
- name: Install VDO dependencies
#maybe use package module?
package:
name: "{{ packages }}"
use: dnf
register: vdo_deps
...
So in my opinion a bug has to be opened if not already done.
The root cause being or for any reason ansible 2.9.10 that recently updated
2.9.9 or having removed python2 modules from the distribution, that before
was for some reason silently used with yum, while not using the expected
dnf module with package....
I'm going to test if in the next phase any further modification has to be
done.
Gianluca
3:15 a.m.
Same problem for the next stage
[ INFO ] TASK [ovirt.hosted_engine_setup : Install oVirt Hosted Engine
packages]
[ ERROR ] fatal: [localhost]: FAILED! => {"attempts": 10,
"changed": false,
"msg": "The Python 2 yum module is needed for this module. If you require
Python 3 support use the `dnf` Ansible module instead."}
I think this is a major problem for new installations.
How can I get back python2 to see if it works without having to go through
all yaml files?
Gianluca
3:53 a.m.
New subject: ovirt 4.4.1.1 hci and problems with ansible 2.9.10 and/or missing python2
Hi Gianluca,
that's very strange error, because I'm 100% sure we are using yum module
with Python3 in several other roles including adding host to engine or
upgrading host and so far I haven't heard any issue with ansible 2.9.10 and
yum module.
Gobinda, wouldn't enforcing python interpreter version help there?
https://github.com/oVirt/ovirt-engine/blob/master/packaging/ansible-runne...
Regards,
Martin
On Fri, Jul 17, 2020 at 10:22 AM Gianluca Cecchi <gianluca.cecchi(a)gmail.com>
wrote:
Same problem for the next stage
[ INFO ] TASK [ovirt.hosted_engine_setup : Install oVirt Hosted Engine
packages]
[ ERROR ] fatal: [localhost]: FAILED! => {"attempts": 10,
"changed":
false, "msg": "The Python 2 yum module is needed for this module. If you
require Python 3 support use the `dnf` Ansible module instead."}
I think this is a major problem for new installations.
How can I get back python2 to see if it works without having to go through
all yaml files?
Gianluca
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/QJ54NVDAGWX...
--
Martin Perina
Manager, Software Engineering
Red Hat Czech s.r.o.
3:58 a.m.
New subject: ovirt 4.4.1.1 hci and problems with ansible 2.9.10 and/or missing python2
On Fri, Jul 17, 2020 at 10:54 AM Martin Perina <mperina(a)redhat.com> wrote:
Hi Gianluca,
that's very strange error, because I'm 100% sure we are using yum module
with Python3 in several other roles including adding host to engine or
upgrading host and so far I haven't heard any issue with ansible 2.9.10 and
yum module.
Gobinda, wouldn't enforcing python interpreter version help there?
https://github.com/oVirt/ovirt-engine/blob/master/packaging/ansible-runne...
Regards,
Martin
I have a very clean install from 4.1.1.1 node ng iso anf I'm the third to
notice that with this release.
The engine deployment is going on. Not finished yet, but to have ti go I
had to modify, with the same strategy ("use: dnf" with package module and
use "package" instead of "yum" and also specifying "use:
dnf") in these
files under /usr/share/ansible/roles:
ovirt.engine-setup/tasks/engine_setup.yml
ovirt.engine-setup/tasks/install_packages.yml
ovirt.hosted_engine_setup/tasks/install_packages.yml
ovirt.hosted_engine_setup/tasks/create_target_vm/03_hosted_engine_final_tasks.yml
ovirt.hosted_engine_setup/tasks/install_appliance.yml
Gianluca
4:04 a.m.
New subject: ovirt 4.4.1.1 hci and problems with ansible 2.9.10 and/or missing python2
On Fri, Jul 17, 2020 at 10:58 AM Gianluca Cecchi <gianluca.cecchi(a)gmail.com>
wrote:
On Fri, Jul 17, 2020 at 10:54 AM Martin Perina
<mperina(a)redhat.com> wrote:
> Hi Gianluca,
>
> that's very strange error, because I'm 100% sure we are using yum module
> with Python3 in several other roles including adding host to engine or
> upgrading host and so far I haven't heard any issue with ansible 2.9.10 and
> yum module.
>
> Gobinda, wouldn't enforcing python interpreter version help there?
>
>
>
https://github.com/oVirt/ovirt-engine/blob/master/packaging/ansible-runne...
>
> Regards,
> Martin
>
>
I have a very clean install from 4.1.1.1 node ng iso anf I'm the third to
notice that with this release.
The engine deployment is going on. Not finished yet, but to have ti go I
had to modify, with the same strategy ("use: dnf" with package module and
use "package" instead of "yum" and also specifying "use:
dnf") in these
files under /usr/share/ansible/roles:
ovirt.engine-setup/tasks/engine_setup.yml
ovirt.engine-setup/tasks/install_packages.yml
ovirt.hosted_engine_setup/tasks/install_packages.yml
ovirt.hosted_engine_setup/tasks/create_target_vm/03_hosted_engine_final_tasks.yml
ovirt.hosted_engine_setup/tasks/install_appliance.yml
Gianluca
The installation from the iso was with all default values.
The only "non standard" thing, if we want it to call this way is that
before running the wizard, on the host I pre-installed the appliance
package, to shorten the deploy phase hereafter.
And to do it I executed, because of habit:
yum install ovirt-engine-appliance
instead of "dnf install...", but I think this doesn't influence ansible
autodetect when using "package" module or the error about python2 when
using "yum" module...
Gianluca
4:25 a.m.
New subject: ovirt 4.4.1.1 hci and problems with ansible 2.9.10 and/or missing python2
On Fri, Jul 17, 2020 at 11:04 AM Gianluca Cecchi <gianluca.cecchi(a)gmail.com>
wrote:
On Fri, Jul 17, 2020 at 10:58 AM Gianluca Cecchi <
gianluca.cecchi(a)gmail.com> wrote:
> On Fri, Jul 17, 2020 at 10:54 AM Martin Perina <mperina(a)redhat.com>
> wrote:
>
>> Hi Gianluca,
>>
>> that's very strange error, because I'm 100% sure we are using yum module
>> with Python3 in several other roles including adding host to engine or
>> upgrading host and so far I haven't heard any issue with ansible 2.9.10 and
>> yum module.
>>
>> Gobinda, wouldn't enforcing python interpreter version help there?
>>
>>
>>
https://github.com/oVirt/ovirt-engine/blob/master/packaging/ansible-runne...
>>
>> Regards,
>> Martin
>>
>>
> I have a very clean install from 4.1.1.1 node ng iso anf I'm the third to
> notice that with this release.
> The engine deployment is going on. Not finished yet, but to have ti go I
> had to modify, with the same strategy ("use: dnf" with package module and
> use "package" instead of "yum" and also specifying "use:
dnf") in these
> files under /usr/share/ansible/roles:
>
> ovirt.engine-setup/tasks/engine_setup.yml
> ovirt.engine-setup/tasks/install_packages.yml
> ovirt.hosted_engine_setup/tasks/install_packages.yml
>
> ovirt.hosted_engine_setup/tasks/create_target_vm/03_hosted_engine_final_tasks.yml
> ovirt.hosted_engine_setup/tasks/install_appliance.yml
>
> Gianluca
>
The installation from the iso was with all default values.
The only "non standard" thing, if we want it to call this way is that
before running the wizard, on the host I pre-installed the appliance
package, to shorten the deploy phase hereafter.
And to do it I executed, because of habit:
yum install ovirt-engine-appliance
instead of "dnf install...", but I think this doesn't influence ansible
autodetect when using "package" module or the error about python2 when
using "yum" module...
Gianluca
The engine deployment failed in the phase where it tries to add the host
and waits for the host to be up and if I go into the logs in
/var/log/ovirt-hosted-engine-setup/engine-logs-2020-07-17T08:30:48Z/ovirt-engine/host-deploy/
the file
ovirt-host-deploy-ansible-20200717104103-novirt2.example.net-3a710f0c.log
contains
020-07-17 10:41:17 CEST - fatal: [novirt2.example.net]: FAILED! =>
{"changed": false, "module_stderr": "/bin/sh: /usr/bin
/python2: No such file or directory\n", "module_stdout": "",
"msg": "The
module failed to execute correctly, you probably
need to set the interpreter.\nSee stdout/stderr for the exact error",
"rc":
127}
2020-07-17 10:41:17 CEST - {
"status" : "OK",
"msg" : "",
"data" : {
"uuid" : "00f4c6a8-8423-4a2a-bfd5-f38c34f56ecf",
"counter" : 53,
"stdout" : "fatal: [novirt2.example.net]: FAILED! =>
{\"changed\":
false, \"module_stderr\": \"/bin/sh: /usr/bin/pytho
n2: No such file or directory\\n\", \"module_stdout\": \"\",
\"msg\": \"The
module failed to execute correctly, you probab
ly need to set the interpreter.\\nSee stdout/stderr for the exact error\",
\"rc\": 127}",
So I think I have to find and solve why it searches python2....
I compared on an existing 4.4.0 environment I have (hci single node
installed from 4.4.0 node ng iso) and no python2 apparently there, only
ansible that is at ansible-2.9.9-1.el8.noarch instead of
ansible-2.9.10-1.el8.noarch of 4.4.1.1
Possibly any wrong default about python?
Alternatives seems the same between 4.4.0 and 4.4.1.1
4.4.0
[g.cecchi@ovirt01 ~]$ alternatives --list
cifs-idmap-plugin auto /usr/lib64/cifs-utils/cifs_idmap_sss.so
ifup auto /etc/sysconfig/network-scripts/ifup
ld auto /usr/bin/ld.bfd
libnssckbi.so.x86_64 auto /usr/lib64/pkcs11/p11-kit-trust.so
libwbclient.so.0.15-64 auto /usr/lib64/samba/wbclient/libwbclient.so.0.15
mkisofs auto /usr/bin/genisoimage
mta auto /usr/sbin/sendmail.postfix
nmap auto /usr/bin/ncat
python auto /usr/libexec/no-python
python3 auto /usr/bin/python3.6
[g.cecchi@ovirt01 ~]$
4.4.1.1
[root@novirt2 host-deploy]# alternatives --list
cifs-idmap-plugin auto /usr/lib64/cifs-utils/cifs_idmap_sss.so
ifup auto /etc/sysconfig/network-scripts/ifup
ld auto /usr/bin/ld.bfd
libnssckbi.so.x86_64 auto /usr/lib64/pkcs11/p11-kit-trust.so
libwbclient.so.0.15-64 auto /usr/lib64/samba/wbclient/libwbclient.so.0.15
mkisofs auto /usr/bin/genisoimage
mta auto /usr/sbin/sendmail.postfix
nmap auto /usr/bin/ncat
python auto /usr/libexec/no-python
python3 auto /usr/bin/python3.6
[root@novirt2 host-deploy]#
Not sure where to search if not somehow a bug of ansible 2.9.10
Can I try to clean install a 4.4.1.1 host and downgrade ansible before
deploy, eg running
rpm -Uvh --oldpackage ansible-2.9.9-1.el8.noarch
?
Where to get the 2.9.9 rpm to apply in case, just to exclude it?
Gianluca
4:35 a.m.
New subject: ovirt 4.4.1.1 hci and problems with ansible 2.9.10 and/or missing python2
On Fri, Jul 17, 2020 at 11:25 AM Gianluca Cecchi <gianluca.cecchi(a)gmail.com>
wrote:
On Fri, Jul 17, 2020 at 11:04 AM Gianluca Cecchi <
gianluca.cecchi(a)gmail.com> wrote:
> On Fri, Jul 17, 2020 at 10:58 AM Gianluca Cecchi <
> gianluca.cecchi(a)gmail.com> wrote:
>
>> On Fri, Jul 17, 2020 at 10:54 AM Martin Perina <mperina(a)redhat.com>
>> wrote:
>>
>>> Hi Gianluca,
>>>
>>> that's very strange error, because I'm 100% sure we are using yum
>>> module with Python3 in several other roles including adding host to engine
>>> or upgrading host and so far I haven't heard any issue with ansible
2.9.10
>>> and yum module.
>>>
>>> Gobinda, wouldn't enforcing python interpreter version help there?
>>>
>>>
>>>
https://github.com/oVirt/ovirt-engine/blob/master/packaging/ansible-runne...
>>>
>>> Regards,
>>> Martin
>>>
>>>
>> I have a very clean install from 4.1.1.1 node ng iso anf I'm the third
>> to notice that with this release.
>> The engine deployment is going on. Not finished yet, but to have ti go I
>> had to modify, with the same strategy ("use: dnf" with package module
and
>> use "package" instead of "yum" and also specifying "use:
dnf") in these
>> files under /usr/share/ansible/roles:
>>
>> ovirt.engine-setup/tasks/engine_setup.yml
>> ovirt.engine-setup/tasks/install_packages.yml
>> ovirt.hosted_engine_setup/tasks/install_packages.yml
>>
>>
ovirt.hosted_engine_setup/tasks/create_target_vm/03_hosted_engine_final_tasks.yml
>> ovirt.hosted_engine_setup/tasks/install_appliance.yml
>>
>> Gianluca
>>
>
> The installation from the iso was with all default values.
> The only "non standard" thing, if we want it to call this way is that
> before running the wizard, on the host I pre-installed the appliance
> package, to shorten the deploy phase hereafter.
> And to do it I executed, because of habit:
> yum install ovirt-engine-appliance
>
> instead of "dnf install...", but I think this doesn't influence
ansible
> autodetect when using "package" module or the error about python2 when
> using "yum" module...
>
> Gianluca
>
The engine deployment failed in the phase where it tries to add the host
and waits for the host to be up and if I go into the logs in
/var/log/ovirt-hosted-engine-setup/engine-logs-2020-07-17T08:30:48Z/ovirt-engine/host-deploy/
the file
ovirt-host-deploy-ansible-20200717104103-novirt2.example.net-3a710f0c.log
contains
020-07-17 10:41:17 CEST - fatal: [novirt2.example.net]: FAILED! =>
{"changed": false, "module_stderr": "/bin/sh: /usr/bin
/python2: No such file or directory\n", "module_stdout": "",
"msg": "The
module failed to execute correctly, you probably
need to set the interpreter.\nSee stdout/stderr for the exact error",
"rc": 127}
2020-07-17 10:41:17 CEST - {
"status" : "OK",
"msg" : "",
"data" : {
"uuid" : "00f4c6a8-8423-4a2a-bfd5-f38c34f56ecf",
"counter" : 53,
"stdout" : "fatal: [novirt2.example.net]: FAILED! =>
{\"changed\":
false, \"module_stderr\": \"/bin/sh: /usr/bin/pytho
n2: No such file or directory\\n\", \"module_stdout\": \"\",
\"msg\":
\"The module failed to execute correctly, you probab
ly need to set the interpreter.\\nSee stdout/stderr for the exact error\",
\"rc\": 127}",
So I think I have to find and solve why it searches python2....
I compared on an existing 4.4.0 environment I have (hci single node
installed from 4.4.0 node ng iso) and no python2 apparently there, only
ansible that is at ansible-2.9.9-1.el8.noarch instead of
ansible-2.9.10-1.el8.noarch of 4.4.1.1
Possibly any wrong default about python?
Alternatives seems the same between 4.4.0 and 4.4.1.1
4.4.0
[g.cecchi@ovirt01 ~]$ alternatives --list
cifs-idmap-plugin auto /usr/lib64/cifs-utils/cifs_idmap_sss.so
ifup auto /etc/sysconfig/network-scripts/ifup
ld auto /usr/bin/ld.bfd
libnssckbi.so.x86_64 auto /usr/lib64/pkcs11/p11-kit-trust.so
libwbclient.so.0.15-64 auto /usr/lib64/samba/wbclient/libwbclient.so.0.15
mkisofs auto /usr/bin/genisoimage
mta auto /usr/sbin/sendmail.postfix
nmap auto /usr/bin/ncat
python auto /usr/libexec/no-python
python3 auto /usr/bin/python3.6
[g.cecchi@ovirt01 ~]$
4.4.1.1
[root@novirt2 host-deploy]# alternatives --list
cifs-idmap-plugin auto /usr/lib64/cifs-utils/cifs_idmap_sss.so
ifup auto /etc/sysconfig/network-scripts/ifup
ld auto /usr/bin/ld.bfd
libnssckbi.so.x86_64 auto /usr/lib64/pkcs11/p11-kit-trust.so
libwbclient.so.0.15-64 auto /usr/lib64/samba/wbclient/libwbclient.so.0.15
mkisofs auto /usr/bin/genisoimage
mta auto /usr/sbin/sendmail.postfix
nmap auto /usr/bin/ncat
python auto /usr/libexec/no-python
python3 auto /usr/bin/python3.6
[root@novirt2 host-deploy]#
Not sure where to search if not somehow a bug of ansible 2.9.10
Can I try to clean install a 4.4.1.1 host and downgrade ansible before
deploy, eg running
rpm -Uvh --oldpackage ansible-2.9.9-1.el8.noarch
?
Where to get the 2.9.9 rpm to apply in case, just to exclude it?
Gianluca
Inside
ovirt-host-deploy-ansible-20200717104103-novirt2.example.net-3a710f0c.log
at the beginning the gathering of facts seems all ok and python3, but then
I see this:
2020-07-17 10:41:14 CEST - TASK [ovirt-host-deploy-facts : Reset
configuration of advanced virtualization module] ***
2020-07-17 10:41:14 CEST - TASK [ovirt-host-deploy-facts : Enable advanced
virtualization module for relevant OS version] ***
2020-07-17 10:41:17 CEST - TASK [ovirt-host-deploy-facts : Install Python3
for CentOS/RHEL8 hosts] ********
2020-07-17 10:41:17 CEST -
2020-07-17 10:41:17 CEST - skipping: [novirt2.example.net]
2020-07-17 10:41:17 CEST - TASK [ovirt-host-deploy-facts : Set facts]
*************************************
2020-07-17 10:41:17 CEST -
2020-07-17 10:41:17 CEST - ok: [novirt2.example.net]
2020-07-17 10:41:17 CEST - {
"status" : "OK",
"msg" : "",
"data" : {
"uuid" : "c6ab4add-cf41-41b0-b7c8-2a3d156542fa",
"counter" : 39,
"stdout" : "ok: [novirt2.example.net]",
"start_line" : 37,
"end_line" : 38,
"runner_ident" : "402b6968-c809-11ea-9d36-00163e0765c1",
"event" : "runner_on_ok",
"pid" : 28793,
"created" : "2020-07-17T08:41:14.380339",
"parent_uuid" : "00163e07-65c1-0ebc-a725-000000000021",
"event_data" : {
"playbook" : "ovirt-host-deploy.yml",
"playbook_uuid" : "eb09419a-dc4a-4ea7-9d94-3f666d9d17e0",
"play" : "all",
"play_uuid" : "00163e07-65c1-0ebc-a725-000000000006",
"play_pattern" : "all",
"task" : "Set facts",
"task_uuid" : "00163e07-65c1-0ebc-a725-000000000021",
"task_action" : "set_fact",
"task_args" : "",
"task_path" :
"/usr/share/ovirt-engine/ansible-runner-service-project/project/roles/ovirt-host-deploy-facts/tasks/main.yml:26",
"role" : "ovirt-host-deploy-facts",
"host" : "novirt2.example.net",
"remote_addr" : "novirt2.example.net",
"res" : {
"changed" : false,
"ansible_facts" : {
"ansible_python_interpreter" : "/usr/bin/python2"
},
"_ansible_no_log" : false
},
"start" : "2020-07-17T08:41:14.242287",
"end" : "2020-07-17T08:41:14.379769",
"duration" : 0.137482,
"event_loop" : null,
"uuid" : "c6ab4add-cf41-41b0-b7c8-2a3d156542fa"
}
}
}
and then the failure because the ansible_python_intepreter has been set to
pythin2
Gianluca
5:10 a.m.
New subject: ovirt 4.4.1.1 hci and problems with ansible 2.9.10 and/or missing python2
Hm...
but then setting that variable to python3 should work, but based on the list reports - it
doesn't work.
Best Regards,
Strahil Nikolov
На 17 юли 2020 г. 12:35:52 GMT+03:00, Gianluca Cecchi <gianluca.cecchi(a)gmail.com>
написа:
>On Fri, Jul 17, 2020 at 11:25 AM Gianluca Cecchi
><gianluca.cecchi(a)gmail.com>
>wrote:
>
>> On Fri, Jul 17, 2020 at 11:04 AM Gianluca Cecchi <
>> gianluca.cecchi(a)gmail.com> wrote:
>>
>>> On Fri, Jul 17, 2020 at 10:58 AM Gianluca Cecchi <
>>> gianluca.cecchi(a)gmail.com> wrote:
>>>
>>>> On Fri, Jul 17, 2020 at 10:54 AM Martin Perina
<mperina(a)redhat.com>
>>>> wrote:
>>>>
>>>>> Hi Gianluca,
>>>>>
>>>>> that's very strange error, because I'm 100% sure we are using
yum
>>>>> module with Python3 in several other roles including adding host
>to engine
>>>>> or upgrading host and so far I haven't heard any issue with
>ansible 2.9.10
>>>>> and yum module.
>>>>>
>>>>> Gobinda, wouldn't enforcing python interpreter version help
there?
>>>>>
>>>>>
>>>>>
>https://github.com/oVirt/ovirt-engine/blob/master/packaging/ansible-runner-service-project/project/roles/ovirt-host-deploy-facts/tasks/main.yml#L28
>>>>>
>>>>> Regards,
>>>>> Martin
>>>>>
>>>>>
>>>> I have a very clean install from 4.1.1.1 node ng iso anf I'm the
>third
>>>> to notice that with this release.
>>>> The engine deployment is going on. Not finished yet, but to have ti
>go I
>>>> had to modify, with the same strategy ("use: dnf" with package
>module and
>>>> use "package" instead of "yum" and also specifying
"use: dnf") in
>these
>>>> files under /usr/share/ansible/roles:
>>>>
>>>> ovirt.engine-setup/tasks/engine_setup.yml
>>>> ovirt.engine-setup/tasks/install_packages.yml
>>>> ovirt.hosted_engine_setup/tasks/install_packages.yml
>>>>
>>>>
>ovirt.hosted_engine_setup/tasks/create_target_vm/03_hosted_engine_final_tasks.yml
>>>> ovirt.hosted_engine_setup/tasks/install_appliance.yml
>>>>
>>>> Gianluca
>>>>
>>>
>>> The installation from the iso was with all default values.
>>> The only "non standard" thing, if we want it to call this way is
>that
>>> before running the wizard, on the host I pre-installed the appliance
>>> package, to shorten the deploy phase hereafter.
>>> And to do it I executed, because of habit:
>>> yum install ovirt-engine-appliance
>>>
>>> instead of "dnf install...", but I think this doesn't
influence
>ansible
>>> autodetect when using "package" module or the error about python2
>when
>>> using "yum" module...
>>>
>>> Gianluca
>>>
>>
>> The engine deployment failed in the phase where it tries to add the
>host
>> and waits for the host to be up and if I go into the logs in
>>
>>
>/var/log/ovirt-hosted-engine-setup/engine-logs-2020-07-17T08:30:48Z/ovirt-engine/host-deploy/
>>
>> the file
>>
>ovirt-host-deploy-ansible-20200717104103-novirt2.example.net-3a710f0c.log
>> contains
>>
>> 020-07-17 10:41:17 CEST - fatal: [novirt2.example.net]: FAILED! =>
>> {"changed": false, "module_stderr": "/bin/sh: /usr/bin
>> /python2: No such file or directory\n", "module_stdout":
"", "msg":
>"The
>> module failed to execute correctly, you probably
>> need to set the interpreter.\nSee stdout/stderr for the exact error",
>> "rc": 127}
>> 2020-07-17 10:41:17 CEST - {
>> "status" : "OK",
>> "msg" : "",
>> "data" : {
>> "uuid" : "00f4c6a8-8423-4a2a-bfd5-f38c34f56ecf",
>> "counter" : 53,
>> "stdout" : "fatal: [novirt2.example.net]: FAILED! =>
>{\"changed\":
>> false, \"module_stderr\": \"/bin/sh: /usr/bin/pytho
>> n2: No such file or directory\\n\", \"module_stdout\":
\"\", \"msg\":
>> \"The module failed to execute correctly, you probab
>> ly need to set the interpreter.\\nSee stdout/stderr for the exact
>error\",
>> \"rc\": 127}",
>>
>> So I think I have to find and solve why it searches python2....
>> I compared on an existing 4.4.0 environment I have (hci single node
>> installed from 4.4.0 node ng iso) and no python2 apparently there,
>only
>> ansible that is at ansible-2.9.9-1.el8.noarch instead of
>> ansible-2.9.10-1.el8.noarch of 4.4.1.1
>>
>> Possibly any wrong default about python?
>>
>> Alternatives seems the same between 4.4.0 and 4.4.1.1
>>
>> 4.4.0
>> [g.cecchi@ovirt01 ~]$ alternatives --list
>> cifs-idmap-plugin auto /usr/lib64/cifs-utils/cifs_idmap_sss.so
>> ifup auto /etc/sysconfig/network-scripts/ifup
>> ld auto /usr/bin/ld.bfd
>> libnssckbi.so.x86_64 auto /usr/lib64/pkcs11/p11-kit-trust.so
>> libwbclient.so.0.15-64 auto
>/usr/lib64/samba/wbclient/libwbclient.so.0.15
>> mkisofs auto /usr/bin/genisoimage
>> mta auto /usr/sbin/sendmail.postfix
>> nmap auto /usr/bin/ncat
>> python auto /usr/libexec/no-python
>> python3 auto /usr/bin/python3.6
>> [g.cecchi@ovirt01 ~]$
>>
>> 4.4.1.1
>> [root@novirt2 host-deploy]# alternatives --list
>> cifs-idmap-plugin auto /usr/lib64/cifs-utils/cifs_idmap_sss.so
>> ifup auto /etc/sysconfig/network-scripts/ifup
>> ld auto /usr/bin/ld.bfd
>> libnssckbi.so.x86_64 auto /usr/lib64/pkcs11/p11-kit-trust.so
>> libwbclient.so.0.15-64 auto
>/usr/lib64/samba/wbclient/libwbclient.so.0.15
>> mkisofs auto /usr/bin/genisoimage
>> mta auto /usr/sbin/sendmail.postfix
>> nmap auto /usr/bin/ncat
>> python auto /usr/libexec/no-python
>> python3 auto /usr/bin/python3.6
>> [root@novirt2 host-deploy]#
>>
>> Not sure where to search if not somehow a bug of ansible 2.9.10
>> Can I try to clean install a 4.4.1.1 host and downgrade ansible
>before
>> deploy, eg running
>>
>> rpm -Uvh --oldpackage ansible-2.9.9-1.el8.noarch
>> ?
>>
>> Where to get the 2.9.9 rpm to apply in case, just to exclude it?
>>
>> Gianluca
>>
>>
>Inside
>ovirt-host-deploy-ansible-20200717104103-novirt2.example.net-3a710f0c.log
>at the beginning the gathering of facts seems all ok and python3, but
>then
>I see this:
>
>2020-07-17 10:41:14 CEST - TASK [ovirt-host-deploy-facts : Reset
>configuration of advanced virtualization module] ***
>2020-07-17 10:41:14 CEST - TASK [ovirt-host-deploy-facts : Enable
>advanced
>virtualization module for relevant OS version] ***
>2020-07-17 10:41:17 CEST - TASK [ovirt-host-deploy-facts : Install
>Python3
>for CentOS/RHEL8 hosts] ********
>2020-07-17 10:41:17 CEST -
>2020-07-17 10:41:17 CEST - skipping: [novirt2.example.net]
>2020-07-17 10:41:17 CEST - TASK [ovirt-host-deploy-facts : Set facts]
>*************************************
>2020-07-17 10:41:17 CEST -
>2020-07-17 10:41:17 CEST - ok: [novirt2.example.net]
>2020-07-17 10:41:17 CEST - {
> "status" : "OK",
> "msg" : "",
> "data" : {
> "uuid" : "c6ab4add-cf41-41b0-b7c8-2a3d156542fa",
> "counter" : 39,
> "stdout" : "ok: [novirt2.example.net]",
> "start_line" : 37,
> "end_line" : 38,
> "runner_ident" : "402b6968-c809-11ea-9d36-00163e0765c1",
> "event" : "runner_on_ok",
> "pid" : 28793,
> "created" : "2020-07-17T08:41:14.380339",
> "parent_uuid" : "00163e07-65c1-0ebc-a725-000000000021",
> "event_data" : {
> "playbook" : "ovirt-host-deploy.yml",
> "playbook_uuid" : "eb09419a-dc4a-4ea7-9d94-3f666d9d17e0",
> "play" : "all",
> "play_uuid" : "00163e07-65c1-0ebc-a725-000000000006",
> "play_pattern" : "all",
> "task" : "Set facts",
> "task_uuid" : "00163e07-65c1-0ebc-a725-000000000021",
> "task_action" : "set_fact",
> "task_args" : "",
> "task_path" :
>"/usr/share/ovirt-engine/ansible-runner-service-project/project/roles/ovirt-host-deploy-facts/tasks/main.yml:26",
> "role" : "ovirt-host-deploy-facts",
> "host" : "novirt2.example.net",
> "remote_addr" : "novirt2.example.net",
> "res" : {
> "changed" : false,
> "ansible_facts" : {
> "ansible_python_interpreter" : "/usr/bin/python2"
> },
> "_ansible_no_log" : false
> },
> "start" : "2020-07-17T08:41:14.242287",
> "end" : "2020-07-17T08:41:14.379769",
> "duration" : 0.137482,
> "event_loop" : null,
> "uuid" : "c6ab4add-cf41-41b0-b7c8-2a3d156542fa"
> }
> }
>}
>
>and then the failure because the ansible_python_intepreter has been set
>to
>pythin2
>
>Gianluca
5:13 a.m.
New subject: ovirt 4.4.1.1 hci and problems with ansible 2.9.10 and/or missing python2
I've reverified that install new host, check for upgrades, upgrade host and
enroll certificates work fine even with ansible 2.9.10 on standalone engine
installation. So there is some issue inside HCI installer, which doesn't
handle python interpreter correctly.
Gianluca, could you please create a bug for that?
Thanks,
Martin
On Fri, Jul 17, 2020 at 11:36 AM Gianluca Cecchi <gianluca.cecchi(a)gmail.com>
wrote:
On Fri, Jul 17, 2020 at 11:25 AM Gianluca Cecchi <
gianluca.cecchi(a)gmail.com> wrote:
> On Fri, Jul 17, 2020 at 11:04 AM Gianluca Cecchi <
> gianluca.cecchi(a)gmail.com> wrote:
>
>> On Fri, Jul 17, 2020 at 10:58 AM Gianluca Cecchi <
>> gianluca.cecchi(a)gmail.com> wrote:
>>
>>> On Fri, Jul 17, 2020 at 10:54 AM Martin Perina <mperina(a)redhat.com>
>>> wrote:
>>>
>>>> Hi Gianluca,
>>>>
>>>> that's very strange error, because I'm 100% sure we are using
yum
>>>> module with Python3 in several other roles including adding host to
engine
>>>> or upgrading host and so far I haven't heard any issue with ansible
2.9.10
>>>> and yum module.
>>>>
>>>> Gobinda, wouldn't enforcing python interpreter version help there?
>>>>
>>>>
>>>>
https://github.com/oVirt/ovirt-engine/blob/master/packaging/ansible-runne...
>>>>
>>>> Regards,
>>>> Martin
>>>>
>>>>
>>> I have a very clean install from 4.1.1.1 node ng iso anf I'm the third
>>> to notice that with this release.
>>> The engine deployment is going on. Not finished yet, but to have ti go
>>> I had to modify, with the same strategy ("use: dnf" with package
module and
>>> use "package" instead of "yum" and also specifying
"use: dnf") in these
>>> files under /usr/share/ansible/roles:
>>>
>>> ovirt.engine-setup/tasks/engine_setup.yml
>>> ovirt.engine-setup/tasks/install_packages.yml
>>> ovirt.hosted_engine_setup/tasks/install_packages.yml
>>>
>>>
ovirt.hosted_engine_setup/tasks/create_target_vm/03_hosted_engine_final_tasks.yml
>>> ovirt.hosted_engine_setup/tasks/install_appliance.yml
>>>
>>> Gianluca
>>>
>>
>> The installation from the iso was with all default values.
>> The only "non standard" thing, if we want it to call this way is that
>> before running the wizard, on the host I pre-installed the appliance
>> package, to shorten the deploy phase hereafter.
>> And to do it I executed, because of habit:
>> yum install ovirt-engine-appliance
>>
>> instead of "dnf install...", but I think this doesn't influence
ansible
>> autodetect when using "package" module or the error about python2 when
>> using "yum" module...
>>
>> Gianluca
>>
>
> The engine deployment failed in the phase where it tries to add the host
> and waits for the host to be up and if I go into the logs in
>
>
/var/log/ovirt-hosted-engine-setup/engine-logs-2020-07-17T08:30:48Z/ovirt-engine/host-deploy/
>
> the file
> ovirt-host-deploy-ansible-20200717104103-novirt2.example.net-3a710f0c.log
> contains
>
> 020-07-17 10:41:17 CEST - fatal: [novirt2.example.net]: FAILED! =>
> {"changed": false, "module_stderr": "/bin/sh: /usr/bin
> /python2: No such file or directory\n", "module_stdout": "",
"msg": "The
> module failed to execute correctly, you probably
> need to set the interpreter.\nSee stdout/stderr for the exact error",
> "rc": 127}
> 2020-07-17 10:41:17 CEST - {
> "status" : "OK",
> "msg" : "",
> "data" : {
> "uuid" : "00f4c6a8-8423-4a2a-bfd5-f38c34f56ecf",
> "counter" : 53,
> "stdout" : "fatal: [novirt2.example.net]: FAILED! =>
{\"changed\":
> false, \"module_stderr\": \"/bin/sh: /usr/bin/pytho
> n2: No such file or directory\\n\", \"module_stdout\": \"\",
\"msg\":
> \"The module failed to execute correctly, you probab
> ly need to set the interpreter.\\nSee stdout/stderr for the exact
> error\", \"rc\": 127}",
>
> So I think I have to find and solve why it searches python2....
> I compared on an existing 4.4.0 environment I have (hci single node
> installed from 4.4.0 node ng iso) and no python2 apparently there, only
> ansible that is at ansible-2.9.9-1.el8.noarch instead of
> ansible-2.9.10-1.el8.noarch of 4.4.1.1
>
> Possibly any wrong default about python?
>
> Alternatives seems the same between 4.4.0 and 4.4.1.1
>
> 4.4.0
> [g.cecchi@ovirt01 ~]$ alternatives --list
> cifs-idmap-plugin auto /usr/lib64/cifs-utils/cifs_idmap_sss.so
> ifup auto /etc/sysconfig/network-scripts/ifup
> ld auto /usr/bin/ld.bfd
> libnssckbi.so.x86_64 auto /usr/lib64/pkcs11/p11-kit-trust.so
> libwbclient.so.0.15-64 auto
> /usr/lib64/samba/wbclient/libwbclient.so.0.15
> mkisofs auto /usr/bin/genisoimage
> mta auto /usr/sbin/sendmail.postfix
> nmap auto /usr/bin/ncat
> python auto /usr/libexec/no-python
> python3 auto /usr/bin/python3.6
> [g.cecchi@ovirt01 ~]$
>
> 4.4.1.1
> [root@novirt2 host-deploy]# alternatives --list
> cifs-idmap-plugin auto /usr/lib64/cifs-utils/cifs_idmap_sss.so
> ifup auto /etc/sysconfig/network-scripts/ifup
> ld auto /usr/bin/ld.bfd
> libnssckbi.so.x86_64 auto /usr/lib64/pkcs11/p11-kit-trust.so
> libwbclient.so.0.15-64 auto
> /usr/lib64/samba/wbclient/libwbclient.so.0.15
> mkisofs auto /usr/bin/genisoimage
> mta auto /usr/sbin/sendmail.postfix
> nmap auto /usr/bin/ncat
> python auto /usr/libexec/no-python
> python3 auto /usr/bin/python3.6
> [root@novirt2 host-deploy]#
>
> Not sure where to search if not somehow a bug of ansible 2.9.10
> Can I try to clean install a 4.4.1.1 host and downgrade ansible before
> deploy, eg running
>
> rpm -Uvh --oldpackage ansible-2.9.9-1.el8.noarch
> ?
>
> Where to get the 2.9.9 rpm to apply in case, just to exclude it?
>
> Gianluca
>
>
Inside
ovirt-host-deploy-ansible-20200717104103-novirt2.example.net-3a710f0c.log
at the beginning the gathering of facts seems all ok and python3, but then
I see this:
2020-07-17 10:41:14 CEST - TASK [ovirt-host-deploy-facts : Reset
configuration of advanced virtualization module] ***
2020-07-17 10:41:14 CEST - TASK [ovirt-host-deploy-facts : Enable advanced
virtualization module for relevant OS version] ***
2020-07-17 10:41:17 CEST - TASK [ovirt-host-deploy-facts : Install Python3
for CentOS/RHEL8 hosts] ********
2020-07-17 10:41:17 CEST -
2020-07-17 10:41:17 CEST - skipping: [novirt2.example.net]
2020-07-17 10:41:17 CEST - TASK [ovirt-host-deploy-facts : Set facts]
*************************************
2020-07-17 10:41:17 CEST -
2020-07-17 10:41:17 CEST - ok: [novirt2.example.net]
2020-07-17 10:41:17 CEST - {
"status" : "OK",
"msg" : "",
"data" : {
"uuid" : "c6ab4add-cf41-41b0-b7c8-2a3d156542fa",
"counter" : 39,
"stdout" : "ok: [novirt2.example.net]",
"start_line" : 37,
"end_line" : 38,
"runner_ident" : "402b6968-c809-11ea-9d36-00163e0765c1",
"event" : "runner_on_ok",
"pid" : 28793,
"created" : "2020-07-17T08:41:14.380339",
"parent_uuid" : "00163e07-65c1-0ebc-a725-000000000021",
"event_data" : {
"playbook" : "ovirt-host-deploy.yml",
"playbook_uuid" : "eb09419a-dc4a-4ea7-9d94-3f666d9d17e0",
"play" : "all",
"play_uuid" : "00163e07-65c1-0ebc-a725-000000000006",
"play_pattern" : "all",
"task" : "Set facts",
"task_uuid" : "00163e07-65c1-0ebc-a725-000000000021",
"task_action" : "set_fact",
"task_args" : "",
"task_path" :
"/usr/share/ovirt-engine/ansible-runner-service-project/project/roles/ovirt-host-deploy-facts/tasks/main.yml:26",
"role" : "ovirt-host-deploy-facts",
"host" : "novirt2.example.net",
"remote_addr" : "novirt2.example.net",
"res" : {
"changed" : false,
"ansible_facts" : {
"ansible_python_interpreter" : "/usr/bin/python2"
},
"_ansible_no_log" : false
},
"start" : "2020-07-17T08:41:14.242287",
"end" : "2020-07-17T08:41:14.379769",
"duration" : 0.137482,
"event_loop" : null,
"uuid" : "c6ab4add-cf41-41b0-b7c8-2a3d156542fa"
}
}
}
and then the failure because the ansible_python_intepreter has been set to
pythin2
Gianluca
--
Martin Perina
Manager, Software Engineering
Red Hat Czech s.r.o.
5:32 a.m.
New subject: ovirt 4.4.1.1 hci and problems with ansible 2.9.10 and/or missing python2
On Fri, Jul 17, 2020 at 12:13 PM Martin Perina <mperina(a)redhat.com> wrote:
I've reverified that install new host, check for upgrades,
upgrade host
and enroll certificates work fine even with ansible 2.9.10 on standalone
engine installation. So there is some issue inside HCI installer, which
doesn't handle python interpreter correctly.
Gianluca, could you please create a bug for that?
Opened here:
https://bugzilla.redhat.com/show_bug.cgi?id=1858234
I have attached the whole content of /var/log/ovirt-hosted-engine-setup/
tree of the host.
Let me know if anything else to attach and feel free to change subject
and/or component
Gianluca
5:38 a.m.
New subject: ovirt 4.4.1.1 hci and problems with ansible 2.9.10 and/or missing python2
Hi Gianluca,
Thanks for opening the bug.
Adding @Prajith Kesava Prasad <pkesavap(a)redhat.com> to look into it.
On Fri, Jul 17, 2020 at 4:02 PM Gianluca Cecchi <gianluca.cecchi(a)gmail.com>
wrote:
On Fri, Jul 17, 2020 at 12:13 PM Martin Perina
<mperina(a)redhat.com> wrote:
> I've reverified that install new host, check for upgrades, upgrade host
> and enroll certificates work fine even with ansible 2.9.10 on standalone
> engine installation. So there is some issue inside HCI installer, which
> doesn't handle python interpreter correctly.
>
> Gianluca, could you please create a bug for that?
>
>
Opened here:
https://bugzilla.redhat.com/show_bug.cgi?id=1858234
I have attached the whole content of /var/log/ovirt-hosted-engine-setup/
tree of the host.
Let me know if anything else to attach and feel free to change subject
and/or component
Gianluca
--
Thanks,
Gobinda
1:20 p.m.
New subject: ovirt 4.4.1.1 hci and problems with ansible 2.9.10 and/or missing python2
cockpit hosted-engine deploy fails after defining VM name with static
address with similar python2 error.
[image: engine-deploy-fail.JPG]
On Fri, Jul 17, 2020 at 6:44 AM Gobinda Das <godas(a)redhat.com> wrote:
Hi Gianluca,
Thanks for opening the bug.
Adding @Prajith Kesava Prasad <pkesavap(a)redhat.com> to look into it.
On Fri, Jul 17, 2020 at 4:02 PM Gianluca Cecchi <gianluca.cecchi(a)gmail.com>
wrote:
> On Fri, Jul 17, 2020 at 12:13 PM Martin Perina <mperina(a)redhat.com>
> wrote:
>
>> I've reverified that install new host, check for upgrades, upgrade host
>> and enroll certificates work fine even with ansible 2.9.10 on standalone
>> engine installation. So there is some issue inside HCI installer, which
>> doesn't handle python interpreter correctly.
>>
>> Gianluca, could you please create a bug for that?
>>
>>
> Opened here:
> https://bugzilla.redhat.com/show_bug.cgi?id=1858234
>
> I have attached the whole content of /var/log/ovirt-hosted-engine-setup/
> tree of the host.
> Let me know if anything else to attach and feel free to change subject
> and/or component
>
> Gianluca
>
--
Thanks,
Gobinda
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/ZFMOSNKCRE4...
1:57 p.m.
New subject: ovirt 4.4.1.1 hci and problems with ansible 2.9.10 and/or missing python2
On Fri, Jul 17, 2020 at 8:20 PM Edward Berger <edwberger(a)gmail.com> wrote:
cockpit hosted-engine deploy fails after defining VM name with
static
address with similar python2 error.
Yes I already reported both here and in the bugzilla, but to fix that it
would be necessary to trick with the engine VM (aka the appliance disk)
itself, so I think it is better to fix the whole root cause when found.
Gianluca
1592
days inactive
1592
days old
12 comments
5 participants
participants (5)
-
Edward Berger -
Gianluca Cecchi -
Gobinda Das -
Martin Perina -
Strahil Nikolov