7:03 a.m.
Hi all,
I'm pretty new to OVirt so forgive me if this problems is trivial...
I received an old IBM BladeCenter H chassis with a few HS22 blades. Some of them are
successfully working in my Ovirt farm, but some not. The NonOperational nodes are not used
because of missing Westmere model. I use 4.3.10 wersion because 4.4 did not supported some
old HW (net adapters, IIRC).
The problem is that many blades are almost identical. For example ("Hosts" page
--> "General" tab --> "Hardware" section):
* BLADE 1 (not working):
Manufacturer:IBM
Family:System x
Product Name:BladeCenter HS22 -[7870H4G]-
Version:07
UUID:e36b6686-d111-11df-9dce-e41f13cb90d0
Serial Number:06FP476
CPU Model Name:Intel(R) Xeon(R) CPU X5670 @ 2.93GHz
CPU Type:Intel Nehalem IBRS SSBD Family
CPU Sockets:2
CPU Cores per Socket:6
CPU Threads per Core:2 (SMT Enabled)
* BLADE 2 (working fine):
Manufacturer: IBM
Family: System x
Product Name: BladeCenter HS22 -[7870H4G]-
Version: 07
UUID: 30f2fcc8-d0ce-11df-bc12-e41f13cb90cc
Serial Number: 06FP469
CPU Model Name: Intel(R) Xeon(R) CPU X5670 @ 2.93GHz
CPU Type: Intel Westmere IBRS SSBD Family
CPU Sockets: 2
CPU Cores per Socket: 6
CPU Threads per Core: 2 (SMT Enabled)
They have same CPU, same HW model, even S/N shows they were produced in the same time. How
is it possible to identify X5670 so differently? Any hints/suggestions what to
check/change?
"Software" section of BLADE 2 (the good one):
OS Version: RHEL - 7 - 8.2003.0.el7.centos
OS Description: oVirt Node 4.3.10
Kernel Version: 3.10.0 - 1127.8.2.el7.x86_64
KVM Version: 2.12.0 - 44.1.el7_8.1
LIBVIRT Version: libvirt-4.5.0-33.el7_8.1
VDSM Version: vdsm-4.30.46-1.el7
SPICE Version: 0.14.0 - 9.el7
GlusterFS Version: glusterfs-6.9-1.el7
CEPH Version: librbd1-10.2.5-4.el7
Open vSwitch Version: openvswitch-2.11.0-4.el7
Kernel Features: PTI: 1, IBRS: 0, RETP: 1, SSBD: 3
VNC Encryption: Disabled
Best regards,
Mariusz
7:23 a.m.
On Thu, Jan 27, 2022 at 3:17 PM <manieq.net(a)gmail.com> wrote:
Most likely they have some different configuration in the BIOS/CMOS/etc. setup.
Perhaps also try comparing the output of 'cat /proc/cpuinfo' between
them, and search general linux documentation about the meaning of the
flags that are different between them.
Good luck and best regards,
--
Didi
12:40 a.m.
SSH to the hypervisour and alias virsh to:
alias virsh='virsh -c
qemu:///system?authfile=/etc/ovirt-hosted-engine/virsh_auth.conf'
Then run and provide the output from both hosts:
virsh domcapabilities
lscpu
Also , check if the rpms are the same (rpm -qa) and compare them.
Best Regards,
Strahil Nikolov
В четвъртък, 27 януари 2022 г., 15:17:54 Гринуич+2, <manieq.net(a)gmail.com>
написа:
Hi all,
I'm pretty new to OVirt so forgive me if this problems is trivial...
I received an old IBM BladeCenter H chassis with a few HS22 blades. Some of them are
successfully working in my Ovirt farm, but some not. The NonOperational nodes are not used
because of missing Westmere model. I use 4.3.10 wersion because 4.4 did not supported some
old HW (net adapters, IIRC).
The problem is that many blades are almost identical. For example ("Hosts" page
--> "General" tab --> "Hardware" section):
* BLADE 1 (not working):
Manufacturer:IBM
Family:System x
Product Name:BladeCenter HS22 -[7870H4G]-
Version:07
UUID:e36b6686-d111-11df-9dce-e41f13cb90d0
Serial Number:06FP476
CPU Model Name:Intel(R) Xeon(R) CPU X5670 @ 2.93GHz
CPU Type:Intel Nehalem IBRS SSBD Family
CPU Sockets:2
CPU Cores per Socket:6
CPU Threads per Core:2 (SMT Enabled)
* BLADE 2 (working fine):
Manufacturer: IBM
Family: System x
Product Name: BladeCenter HS22 -[7870H4G]-
Version: 07
UUID: 30f2fcc8-d0ce-11df-bc12-e41f13cb90cc
Serial Number: 06FP469
CPU Model Name: Intel(R) Xeon(R) CPU X5670 @ 2.93GHz
CPU Type: Intel Westmere IBRS SSBD Family
CPU Sockets: 2
CPU Cores per Socket: 6
CPU Threads per Core: 2 (SMT Enabled)
They have same CPU, same HW model, even S/N shows they were produced in the same time. How
is it possible to identify X5670 so differently? Any hints/suggestions what to
check/change?
"Software" section of BLADE 2 (the good one):
OS Version: RHEL - 7 - 8.2003.0.el7.centos
OS Description: oVirt Node 4.3.10
Kernel Version: 3.10.0 - 1127.8.2.el7.x86_64
KVM Version: 2.12.0 - 44.1.el7_8.1
LIBVIRT Version: libvirt-4.5.0-33.el7_8.1
VDSM Version: vdsm-4.30.46-1.el7
SPICE Version: 0.14.0 - 9.el7
GlusterFS Version: glusterfs-6.9-1.el7
CEPH Version: librbd1-10.2.5-4.el7
Open vSwitch Version: openvswitch-2.11.0-4.el7
Kernel Features: PTI: 1, IBRS: 0, RETP: 1, SSBD: 3
VNC Encryption: Disabled
Best regards,
Mariusz
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/RWXIM5LHM7H...
1260
days inactive
1261
days old
2 comments
3 participants
participants (3)
-
manieq.net＠gmail.com -
Strahil Nikolov -
Yedidyah Bar David