9:18 p.m.
Hi everyone.
I have deployed a 3x replica glusterfs succesfully.
I have 4 nic in each server. Will be using 2 bond, one for gluster and the
other for the vm. My doubt is:
Actually, my network is 192.168.2.0/23
The IP of bond0 and bond1 should be in differente networks? Can i give, for
example, 192.168.2.3 to bond0 and 192.168.2.4 to bond1?
If above can be do it, how?
Thx in advance
9:30 p.m.
Yes.Keep in mind that the bricks (hostname/ip+mountpoint combo) should be part of the
Gluster network. The IP you use while mounting is used only to retrieve the volume info
(and the bricks) while the brick FQDN/hostname/IP is used for the actual data transfer.If
you use LACP, you can combine all 4 ports (of course you can use VLANs) and simplify the
setup.10GBE is recommended, but faster is better.
Best Regards,Strahil Nikolov
On Thu, Aug 18, 2022 at 21:19, Facundo Badaracco<varekoarfa(a)gmail.com> wrote: Hi
everyone. I have deployed a 3x replica glusterfs succesfully. I have 4 nic in each server.
Will be using 2 bond, one for gluster and the other for the vm. My doubt is:
Actually, my network is 192.168.2.0/23
The IP of bond0 and bond1 should be in differente networks? Can i give, for example,
192.168.2.3 to bond0 and 192.168.2.4 to bond1?If above can be do it, how?
Thx in advance_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/TJZSZDORACV...
7:13 a.m.
Facundo,
That should be fine, the requirement for different networks is aligned with bandwidth and
performance I think more than anything else. As long as you have two different interfaces
and they have valid DNS records oVirt wouldn't actually know how the networking
switching and routing is configured behind the IP addresses.
- Dave.
1:52 p.m.
Thx dave!
Then my problem is the SO. When i activate the 2d nic, the first one goes
innaccesible. I should do something with routing, right?
El vie., 19 de agosto de 2022 01:13, Dave Lennox <
david.lennox(a)frontlinedigital.com.au> escribió:
Facundo,
That should be fine, the requirement for different networks is aligned
with bandwidth and performance I think more than anything else. As long as
you have two different interfaces and they have valid DNS records oVirt
wouldn't actually know how the networking switching and routing is
configured behind the IP addresses.
- Dave.
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/KQOZH6A7ZZ6...
2:13 a.m.
You should give an example , as it's not clear enough.
Best Regards,Strahil Nikolov
On Fri, Aug 19, 2022 at 13:53, Facundo Badaracco<varekoarfa(a)gmail.com> wrote:
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/HDNSUXM7VML...
826
days inactive
827
days old
4 comments
3 participants
participants (3)
-
Dave Lennox -
Facundo Badaracco -
Strahil Nikolov