7:49 a.m.
Hi List,
I have two nodes (running CentOS 7) and the network interface order
changed for some interfaces after every reboot.
The configurations are done through the oVirt GUI. So the ifcfg-ethX
scripts are configured automatically by VDSM.
Is there any option to get this configured to be stable?
Best regards and thank you
Christoph
7:15 a.m.
Christoph,
Are those nodes bare-metal or they're VMs?
Regards,
Yevgeny
On Thu, Jun 23, 2016 at 3:49 PM, <ovirt(a)timmi.org> wrote:
Hi List,
I have two nodes (running CentOS 7) and the network interface order
changed for some interfaces after every reboot.
The configurations are done through the oVirt GUI. So the ifcfg-ethX
scripts are configured automatically by VDSM.
Is there any option to get this configured to be stable?
Best regards and thank you
Christoph
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
7:19 a.m.
BTW, what oVirt (vdsm&engine) version do you use?
On Sun, Jun 26, 2016 at 3:15 PM, Yevgeny Zaspitsky <yzaspits(a)redhat.com>
wrote:
Christoph,
Are those nodes bare-metal or they're VMs?
Regards,
Yevgeny
On Thu, Jun 23, 2016 at 3:49 PM, <ovirt(a)timmi.org> wrote:
> Hi List,
>
> I have two nodes (running CentOS 7) and the network interface order
> changed for some interfaces after every reboot.
>
> The configurations are done through the oVirt GUI. So the ifcfg-ethX
> scripts are configured automatically by VDSM.
>
> Is there any option to get this configured to be stable?
>
> Best regards and thank you
>
> Christoph
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
8:42 a.m.
This is a multi-part message in MIME format.
--------------660CA66865BF60D32DB90FF5
Content-Type: text/plain; charset=utf-8; format=flowed
Content-Transfer-Encoding: 7bit
Hi,
I'm using currently the following:
But the problem is not new.
ovirt-engine.noarch 3.6.6.2-1.el7.centos @ovirt-3.6
vdsm.noarch 4.17.28-1.el7 @centos-ovirt36
Best regards
Christoph
Am 26.06.2016 um 14:19 schrieb Yevgeny Zaspitsky:
BTW, what oVirt (vdsm&engine) version do you use?
On Sun, Jun 26, 2016 at 3:15 PM, Yevgeny Zaspitsky
<yzaspits(a)redhat.com <mailto:yzaspits@redhat.com>> wrote:
Christoph,
Are those nodes bare-metal or they're VMs?
Regards,
Yevgeny
On Thu, Jun 23, 2016 at 3:49 PM, <ovirt(a)timmi.org
<mailto:ovirt@timmi.org>> wrote:
Hi List,
I have two nodes (running CentOS 7) and the network interface
order changed for some interfaces after every reboot.
The configurations are done through the oVirt GUI. So the
ifcfg-ethX scripts are configured automatically by VDSM.
Is there any option to get this configured to be stable?
Best regards and thank you
Christoph
_______________________________________________
Users mailing list
Users(a)ovirt.org <mailto:Users@ovirt.org>
http://lists.ovirt.org/mailman/listinfo/users
--------------660CA66865BF60D32DB90FF5
Content-Type: text/html; charset=utf-8
Content-Transfer-Encoding: 8bit
<html>
<head>
<meta content="text/html; charset=utf-8"
http-equiv="Content-Type">
</head>
<body bgcolor="#FFFFFF" text="#000000">
<p>Hi,</p>
<p>I'm using currently the following:</p>
<p>But the problem is not new.<br>
</p>
<p>ovirt-engine.noarch 3.6.6.2-1.el7.centos
@ovirt-3.6 <br>
</p>
<p>vdsm.noarch 4.17.28-1.el7
@centos-ovirt36<br>
<br>
</p>
<p>Best regards</p>
<p>Christoph<br>
</p>
<br>
<div class="moz-cite-prefix">Am 26.06.2016 um 14:19 schrieb Yevgeny
Zaspitsky:<br>
</div>
<blockquote
cite="mid:CAOQTZNeAJuWnbBLinJ2VYTVa91QT46_45JRojOH2r2V_788p+g@mail.gmail.com"
type="cite">
<div dir="ltr">BTW, what oVirt (vdsm&engine) version do you
use?<br>
</div>
<div class="gmail_extra"><br>
<div class="gmail_quote">On Sun, Jun 26, 2016 at 3:15 PM,
Yevgeny Zaspitsky <span dir="ltr"><<a
moz-do-not-send="true"
href="mailto:yzaspits@redhat.com"
target="_blank"><a
class="moz-txt-link-abbreviated"
href="mailto:yzaspits@redhat.com">yzaspits@redhat.com</a></a>></span>
wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0
.8ex;border-left:1px #ccc solid;padding-left:1ex">
<div dir="ltr">
<div>
<div>
<div>Christoph,<br>
<br>
</div>
Are those nodes bare-metal or they're VMs?<br>
<br>
</div>
Regards,<br>
</div>
Yevgeny</div>
<div class="HOEnZb">
<div class="h5">
<div class="gmail_extra"><br>
<div class="gmail_quote">On Thu, Jun 23, 2016 at 3:49
PM, <span dir="ltr"><<a
moz-do-not-send="true"
href="mailto:ovirt@timmi.org"
target="_blank">ovirt(a)timmi.org</a>&gt;</span>
wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0
.8ex;border-left:1px #ccc solid;padding-left:1ex">Hi
List,<br>
<br>
I have two nodes (running CentOS 7) and the
network interface order changed for some
interfaces after every reboot.<br>
<br>
The configurations are done through the oVirt GUI.
So the ifcfg-ethX scripts are configured
automatically by VDSM.<br>
<br>
Is there any option to get this configured to be
stable?<br>
<br>
Best regards and thank you<br>
<br>
Christoph<br>
<br>
_______________________________________________<br>
Users mailing list<br>
<a moz-do-not-send="true"
href="mailto:Users@ovirt.org"
target="_blank">Users(a)ovirt.org</a><br>
<a moz-do-not-send="true"
href="http://lists.ovirt.org/mailman/listinfo/users"
rel="noreferrer"
target="_blank">http://lists.ovirt.org/mailman/listinfo/user...
</blockquote>
</div>
<br>
</div>
</div>
</div>
</blockquote>
</div>
<br>
</div>
</blockquote>
<br>
</body>
</html>
--------------660CA66865BF60D32DB90FF5--
8:40 a.m.
This is a multi-part message in MIME format.
--------------D5F3D769607C3156818F7F02
Content-Type: text/plain; charset=utf-8; format=flowed
Content-Transfer-Encoding: 7bit
Hi Yevgeny,
this are real machines.
Best regards
Christoph
Am 26.06.2016 um 14:15 schrieb Yevgeny Zaspitsky:
Christoph,
Are those nodes bare-metal or they're VMs?
Regards,
Yevgeny
On Thu, Jun 23, 2016 at 3:49 PM, <ovirt(a)timmi.org
<mailto:ovirt@timmi.org>> wrote:
Hi List,
I have two nodes (running CentOS 7) and the network interface
order changed for some interfaces after every reboot.
The configurations are done through the oVirt GUI. So the
ifcfg-ethX scripts are configured automatically by VDSM.
Is there any option to get this configured to be stable?
Best regards and thank you
Christoph
_______________________________________________
Users mailing list
Users(a)ovirt.org <mailto:Users@ovirt.org>
http://lists.ovirt.org/mailman/listinfo/users
--------------D5F3D769607C3156818F7F02
Content-Type: text/html; charset=utf-8
Content-Transfer-Encoding: 7bit
<html>
<head>
<meta content="text/html; charset=utf-8"
http-equiv="Content-Type">
</head>
<body bgcolor="#FFFFFF" text="#000000">
<p>Hi Yevgeny,</p>
<p>this are real machines.</p>
<p>Best regards<br>
Christoph<br>
</p>
<div class="moz-cite-prefix">Am 26.06.2016 um 14:15 schrieb Yevgeny
Zaspitsky:<br>
</div>
<blockquote
cite="mid:CAOQTZNfmkn5_NSwaXrRkSbStUQL+MTtD1sEqzmYxPFw=hh7iKA@mail.gmail.com"
type="cite">
<div dir="ltr">
<div>
<div>
<div>Christoph,<br>
<br>
</div>
Are those nodes bare-metal or they're VMs?<br>
<br>
</div>
Regards,<br>
</div>
Yevgeny</div>
<div class="gmail_extra"><br>
<div class="gmail_quote">On Thu, Jun 23, 2016 at 3:49 PM,
<span
dir="ltr"><<a moz-do-not-send="true"
href="mailto:ovirt@timmi.org"
target="_blank">ovirt(a)timmi.org</a>&gt;</span>
wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0
.8ex;border-left:1px #ccc solid;padding-left:1ex">Hi List,<br>
<br>
I have two nodes (running CentOS 7) and the network
interface order changed for some interfaces after every
reboot.<br>
<br>
The configurations are done through the oVirt GUI. So the
ifcfg-ethX scripts are configured automatically by VDSM.<br>
<br>
Is there any option to get this configured to be stable?<br>
<br>
Best regards and thank you<br>
<br>
Christoph<br>
<br>
_______________________________________________<br>
Users mailing list<br>
<a moz-do-not-send="true"
href="mailto:Users@ovirt.org"
target="_blank">Users(a)ovirt.org</a><br>
<a moz-do-not-send="true"
href="http://lists.ovirt.org/mailman/listinfo/users"
rel="noreferrer"
target="_blank">http://lists.ovirt.org/mailman/listinfo/user...
</blockquote>
</div>
<br>
</div>
</blockquote>
<br>
</body>
</html>
--------------D5F3D769607C3156818F7F02--
7:51 a.m.
On Thu, Jun 23, 2016 at 3:49 PM, <ovirt(a)timmi.org> wrote:
Hi List,
I have two nodes (running CentOS 7) and the network interface order
changed for some interfaces after every reboot.
The configurations are done through the oVirt GUI. So the ifcfg-ethX
scripts are configured automatically by VDSM.
Is there any option to get this configured to be stable?
Best regards and thank you
Christoph
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
Hi Christoph,
VDSM indeed edits and takes ownership of the interfaces for the networks it
manages.
However, editing the ifcfg files should not change anything in the order of
the devices, unless it was originally set
in an unsupported fashion. An ifcfg file is bound to a specific device name
and I'm not familiar to device names
floating around randomly.
Perhaps you should elaborate more on what it means by 'order changed'.
Here is an example of a setup we do not support (pre adding the host to
Engine):
The initial ifcfg file name: ifcfg-eth0
The initial ifcfg file content: DEVICE="eth1"
In this configuration, the name of the ifcfg file is inconsistent with the
name of the device it represents.
VDSM expects them to me in sync.
Please provide the ifcfg files before and after you add the host to Engine.
Thanks,
Edy.
7:59 a.m.
On Sun, Jun 26, 2016 at 3:51 PM, Edward Haas <ehaas(a)redhat.com> wrote:
On Thu, Jun 23, 2016 at 3:49 PM, <ovirt(a)timmi.org> wrote:
>
> Hi List,
>
> I have two nodes (running CentOS 7) and the network interface order
> changed for some interfaces after every reboot.
>
> The configurations are done through the oVirt GUI. So the ifcfg-ethX
> scripts are configured automatically by VDSM.
>
> Is there any option to get this configured to be stable?
>
> Best regards and thank you
>
> Christoph
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
Hi Christoph,
VDSM indeed edits and takes ownership of the interfaces for the networks it
manages.
However, editing the ifcfg files should not change anything in the order of
the devices, unless it was originally set
in an unsupported fashion. An ifcfg file is bound to a specific device name
and I'm not familiar to device names
floating around randomly.
Perhaps you should elaborate more on what it means by 'order changed'.
Here is an example of a setup we do not support (pre adding the host to
Engine):
The initial ifcfg file name: ifcfg-eth0
The initial ifcfg file content: DEVICE="eth1"
In this configuration, the name of the ifcfg file is inconsistent with the
name of the device it represents.
VDSM expects them to me in sync.
Please provide the ifcfg files before and after you add the host to Engine.
Perhaps Christoph refers to the problem that [1] was meant to solve?
[1] https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInter...
--
Didi
1:29 a.m.
On Sun, Jun 26, 2016 at 03:59:31PM +0300, Yedidyah Bar David wrote:
On Sun, Jun 26, 2016 at 3:51 PM, Edward Haas <ehaas(a)redhat.com>
wrote:
>
>
> On Thu, Jun 23, 2016 at 3:49 PM, <ovirt(a)timmi.org> wrote:
>>
>> Hi List,
>>
>> I have two nodes (running CentOS 7) and the network interface order
>> changed for some interfaces after every reboot.
>>
>> The configurations are done through the oVirt GUI. So the ifcfg-ethX
>> scripts are configured automatically by VDSM.
>>
>> Is there any option to get this configured to be stable?
>>
>> Best regards and thank you
>>
>> Christoph
>>
>> _______________________________________________
>> Users mailing list
>> Users(a)ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>
>
> Hi Christoph,
>
> VDSM indeed edits and takes ownership of the interfaces for the networks it
> manages.
> However, editing the ifcfg files should not change anything in the order of
> the devices, unless it was originally set
> in an unsupported fashion. An ifcfg file is bound to a specific device name
> and I'm not familiar to device names
> floating around randomly.
> Perhaps you should elaborate more on what it means by 'order changed'.
>
> Here is an example of a setup we do not support (pre adding the host to
> Engine):
> The initial ifcfg file name: ifcfg-eth0
> The initial ifcfg file content: DEVICE="eth1"
> In this configuration, the name of the ifcfg file is inconsistent with the
> name of the device it represents.
> VDSM expects them to me in sync.
>
> Please provide the ifcfg files before and after you add the host to Engine.
Perhaps Christoph refers to the problem that [1] was meant to solve?
[1] https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInter...
To add on what didi says, this should be the default with el7's systemd.
It is surprising that your nics are named eth*, and not by the
predictable nic name scheme.
Maybe if you share your `lspci -vvv` and /var/log/messages of two
different boots, we can have a hint regarding your instability.
2:17 a.m.
Hi Dan,
I'm using the kernal parameter net.ifnames=0 to have the old naming schema.
I will try to get rid of it on the machine and check if this is solving
my issue.
Best regards
Christoph
Am 27.06.2016 um 08:29 schrieb Dan Kenigsberg:
On Sun, Jun 26, 2016 at 03:59:31PM +0300, Yedidyah Bar David wrote:
> On Sun, Jun 26, 2016 at 3:51 PM, Edward Haas <ehaas(a)redhat.com> wrote:
>>
>> On Thu, Jun 23, 2016 at 3:49 PM, <ovirt(a)timmi.org> wrote:
>>> Hi List,
>>>
>>> I have two nodes (running CentOS 7) and the network interface order
>>> changed for some interfaces after every reboot.
>>>
>>> The configurations are done through the oVirt GUI. So the ifcfg-ethX
>>> scripts are configured automatically by VDSM.
>>>
>>> Is there any option to get this configured to be stable?
>>>
>>> Best regards and thank you
>>>
>>> Christoph
>>>
>>> _______________________________________________
>>> Users mailing list
>>> Users(a)ovirt.org
>>> http://lists.ovirt.org/mailman/listinfo/users
>>
>> Hi Christoph,
>>
>> VDSM indeed edits and takes ownership of the interfaces for the networks it
>> manages.
>> However, editing the ifcfg files should not change anything in the order of
>> the devices, unless it was originally set
>> in an unsupported fashion. An ifcfg file is bound to a specific device name
>> and I'm not familiar to device names
>> floating around randomly.
>> Perhaps you should elaborate more on what it means by 'order changed'.
>>
>> Here is an example of a setup we do not support (pre adding the host to
>> Engine):
>> The initial ifcfg file name: ifcfg-eth0
>> The initial ifcfg file content: DEVICE="eth1"
>> In this configuration, the name of the ifcfg file is inconsistent with the
>> name of the device it represents.
>> VDSM expects them to me in sync.
>>
>> Please provide the ifcfg files before and after you add the host to Engine.
> Perhaps Christoph refers to the problem that [1] was meant to solve?
>
> [1]
https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInter...
To add on what didi says, this should be the default with el7's systemd.
It is surprising that your nics are named eth*, and not by the
predictable nic name scheme.
Maybe if you share your `lspci -vvv` and /var/log/messages of two
different boots, we can have a hint regarding your instability.
8:48 a.m.
This is a multi-part message in MIME format.
--------------376CCBE775E16609A550A09B
Content-Type: text/plain; charset=utf-8; format=flowed
Content-Transfer-Encoding: 7bit
Hi Edy,
please find some config files below. I did the interface config only
through the oVirt GUI.
I mean by reordering that after every reboot some interfaces are not the
same as before. That means I need to change the cables after reboot.
[root@lxedna ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth0
# Generated by VDSM version 4.17.28-1.el7
DEVICE=eth0
ONBOOT=yes
BOOTPROTO=dhcp
MTU=1500
DEFROUTE=yes
NM_CONTROLLED=no
IPV6INIT=no
[root@lxedna ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth1
# Generated by VDSM version 4.17.23-0.el7.centos
DEVICE=eth1
BRIDGE=Test-LAN-SW1
ONBOOT=yes
MTU=1500
NM_CONTROLLED=no
IPV6INIT=no
[root@lxedna ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth2
# Generated by VDSM version 4.17.23-0.el7.centos
DEVICE=eth2
BRIDGE=PC-LAN
ONBOOT=yes
MTU=1500
NM_CONTROLLED=no
IPV6INIT=no
Best regards
Christoph
Am 26.06.2016 um 14:51 schrieb Edward Haas:
On Thu, Jun 23, 2016 at 3:49 PM, <ovirt(a)timmi.org
<mailto:ovirt@timmi.org>> wrote:
Hi List,
I have two nodes (running CentOS 7) and the network interface
order changed for some interfaces after every reboot.
The configurations are done through the oVirt GUI. So the
ifcfg-ethX scripts are configured automatically by VDSM.
Is there any option to get this configured to be stable?
Best regards and thank you
Christoph
_______________________________________________
Users mailing list
Users(a)ovirt.org <mailto:Users@ovirt.org>
http://lists.ovirt.org/mailman/listinfo/users
Hi Christoph,
VDSM indeed edits and takes ownership of the interfaces for the
networks it manages.
However, editing the ifcfg files should not change anything in the
order of the devices, unless it was originally set
in an unsupported fashion. An ifcfg file is bound to a specific device
name and I'm not familiar to device names
floating around randomly.
Perhaps you should elaborate more on what it means by 'order changed'.
Here is an example of a setup we do not support (pre adding the host
to Engine):
The initial ifcfg file name: ifcfg-eth0
The initial ifcfg file content: DEVICE="eth1"
In this configuration, the name of the ifcfg file is inconsistent with
the name of the device it represents.
VDSM expects them to me in sync.
Please provide the ifcfg files before and after you add the host to
Engine.
Thanks,
Edy.
--------------376CCBE775E16609A550A09B
Content-Type: text/html; charset=utf-8
Content-Transfer-Encoding: 7bit
<html>
<head>
<meta content="text/html; charset=utf-8"
http-equiv="Content-Type">
</head>
<body bgcolor="#FFFFFF" text="#000000">
Hi Edy,<br>
<br>
please find some config files below. I did the interface config only
through the oVirt GUI.<br>
<br>
I mean by reordering that after every reboot some interfaces are not
the same as before. That means I need to change the cables after
reboot.<br>
<br>
[root@lxedna ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth0<br>
# Generated by VDSM version 4.17.28-1.el7<br>
DEVICE=eth0<br>
ONBOOT=yes<br>
BOOTPROTO=dhcp<br>
MTU=1500<br>
DEFROUTE=yes<br>
NM_CONTROLLED=no<br>
IPV6INIT=no<br>
[root@lxedna ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth1<br>
# Generated by VDSM version 4.17.23-0.el7.centos<br>
DEVICE=eth1<br>
BRIDGE=Test-LAN-SW1<br>
ONBOOT=yes<br>
MTU=1500<br>
NM_CONTROLLED=no<br>
IPV6INIT=no<br>
[root@lxedna ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth2<br>
# Generated by VDSM version 4.17.23-0.el7.centos<br>
DEVICE=eth2<br>
BRIDGE=PC-LAN<br>
ONBOOT=yes<br>
MTU=1500<br>
NM_CONTROLLED=no<br>
IPV6INIT=no<br>
<br>
Best regards<br>
Christoph<br>
<br>
<div class="moz-cite-prefix">Am 26.06.2016 um 14:51 schrieb Edward
Haas:<br>
</div>
<blockquote
cite="mid:CALmkdFTPGpiqNyXfkYBOZe-=5F=GPb+LzTGh97Ogmy82WunHTQ@mail.gmail.com"
type="cite">
<div dir="ltr"><br>
<div class="gmail_extra"><br>
<div class="gmail_quote">On Thu, Jun 23, 2016 at 3:49 PM,
<span
dir="ltr"><<a moz-do-not-send="true"
href="mailto:ovirt@timmi.org"
target="_blank">ovirt(a)timmi.org</a>&gt;</span>
wrote:<br>
<blockquote class="gmail_quote" style="margin:0px 0px 0px
0.8ex;border-left:1px solid
rgb(204,204,204);padding-left:1ex">Hi List,<br>
<br>
I have two nodes (running CentOS 7) and the network
interface order changed for some interfaces after every
reboot.<br>
<br>
The configurations are done through the oVirt GUI. So the
ifcfg-ethX scripts are configured automatically by VDSM.<br>
<br>
Is there any option to get this configured to be stable?<br>
<br>
Best regards and thank you<br>
<br>
Christoph<br>
<br>
_______________________________________________<br>
Users mailing list<br>
<a moz-do-not-send="true"
href="mailto:Users@ovirt.org"
target="_blank">Users(a)ovirt.org</a><br>
<a moz-do-not-send="true"
href="http://lists.ovirt.org/mailman/listinfo/users"
rel="noreferrer"
target="_blank">http://lists.ovirt.org/mailman/listinfo/user...
</blockquote>
</div>
<br>
</div>
<div class="gmail_extra">Hi Christoph,<br>
<br>
</div>
<div class="gmail_extra">VDSM indeed edits and takes ownership
of the interfaces for the networks it manages.<br>
</div>
<div class="gmail_extra">However, editing the ifcfg files should
not change anything in the order of the devices, unless it was
originally set <br>
in an unsupported fashion. An ifcfg file is bound to a
specific device name and I'm not familiar to device names<br>
</div>
<div class="gmail_extra">floating around randomly.<br>
</div>
<div class="gmail_extra">Perhaps you should elaborate more on
what it means by 'order changed'.<br>
</div>
<div class="gmail_extra"><br>
Here is an example of a setup we do not support (pre adding
the host to Engine): <br>
The initial ifcfg file name: ifcfg-eth0<br>
</div>
<div class="gmail_extra">The initial ifcfg file content:
DEVICE="eth1"<br>
</div>
<div class="gmail_extra">In this configuration, the name of the
ifcfg file is inconsistent with the name of the device it
represents.<br>
</div>
<div class="gmail_extra">VDSM expects them to me in
sync.<br>
<br>
</div>
<div class="gmail_extra">Please provide the ifcfg files before
and after you add the host to Engine.<br>
</div>
<div class="gmail_extra"><br>
</div>
<div class="gmail_extra">Thanks,<br>
</div>
<div class="gmail_extra">Edy.<br>
</div>
<div class="gmail_extra"><br>
</div>
</div>
</blockquote>
<br>
</body>
</html>
--------------376CCBE775E16609A550A09B--
9:08 a.m.
On Sun, Jun 26, 2016 at 4:48 PM, <ovirt(a)timmi.org> wrote:
Hi Edy,
please find some config files below. I did the interface config only
through the oVirt GUI.
I mean by reordering that after every reboot some interfaces are not the
same as before. That means I need to change the cables after reboot.
This sounds like the problem Didi referenced to.
Before you configured the interfaces through oVirt, wasn't there any ifcfg
files?
(just to understand why you have not seen this before, without vdsm on the
host)
[root@lxedna ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth0
# Generated by VDSM version 4.17.28-1.el7
DEVICE=eth0
ONBOOT=yes
BOOTPROTO=dhcp
MTU=1500
DEFROUTE=yes
NM_CONTROLLED=no
IPV6INIT=no
[root@lxedna ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth1
# Generated by VDSM version 4.17.23-0.el7.centos
DEVICE=eth1
BRIDGE=Test-LAN-SW1
ONBOOT=yes
MTU=1500
NM_CONTROLLED=no
IPV6INIT=no
[root@lxedna ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth2
# Generated by VDSM version 4.17.23-0.el7.centos
DEVICE=eth2
BRIDGE=PC-LAN
ONBOOT=yes
MTU=1500
NM_CONTROLLED=no
IPV6INIT=no
Best regards
Christoph
Am 26.06.2016 um 14:51 schrieb Edward Haas:
On Thu, Jun 23, 2016 at 3:49 PM, <ovirt(a)timmi.org> wrote:
> Hi List,
>
> I have two nodes (running CentOS 7) and the network interface order
> changed for some interfaces after every reboot.
>
> The configurations are done through the oVirt GUI. So the ifcfg-ethX
> scripts are configured automatically by VDSM.
>
> Is there any option to get this configured to be stable?
>
> Best regards and thank you
>
> Christoph
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
Hi Christoph,
VDSM indeed edits and takes ownership of the interfaces for the networks
it manages.
However, editing the ifcfg files should not change anything in the order
of the devices, unless it was originally set
in an unsupported fashion. An ifcfg file is bound to a specific device
name and I'm not familiar to device names
floating around randomly.
Perhaps you should elaborate more on what it means by 'order changed'.
Here is an example of a setup we do not support (pre adding the host to
Engine):
The initial ifcfg file name: ifcfg-eth0
The initial ifcfg file content: DEVICE="eth1"
In this configuration, the name of the ifcfg file is inconsistent with the
name of the device it represents.
VDSM expects them to me in sync.
Please provide the ifcfg files before and after you add the host to Engine.
Thanks,
Edy.
11:14 a.m.
This is a multi-part message in MIME format.
--------------DB1A7A23E942A9C9087F5394
Content-Type: text/plain; charset=utf-8; format=flowed
Content-Transfer-Encoding: 7bit
No I just eth0 was configured during OS installation. All other
interface have been configured through the oVirt GUI.
Best regards
Christoph
Am 26.06.2016 um 16:08 schrieb Edward Haas:
On Sun, Jun 26, 2016 at 4:48 PM, <ovirt(a)timmi.org
<mailto:ovirt@timmi.org>> wrote:
Hi Edy,
please find some config files below. I did the interface config
only through the oVirt GUI.
I mean by reordering that after every reboot some interfaces are
not the same as before. That means I need to change the cables
after reboot.
This sounds like the problem Didi referenced to.
Before you configured the interfaces through oVirt, wasn't there any
ifcfg files?
(just to understand why you have not seen this before, without vdsm on
the host)
[root@lxedna ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth0
# Generated by VDSM version 4.17.28-1.el7
DEVICE=eth0
ONBOOT=yes
BOOTPROTO=dhcp
MTU=1500
DEFROUTE=yes
NM_CONTROLLED=no
IPV6INIT=no
[root@lxedna ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth1
# Generated by VDSM version 4.17.23-0.el7.centos
DEVICE=eth1
BRIDGE=Test-LAN-SW1
ONBOOT=yes
MTU=1500
NM_CONTROLLED=no
IPV6INIT=no
[root@lxedna ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth2
# Generated by VDSM version 4.17.23-0.el7.centos
DEVICE=eth2
BRIDGE=PC-LAN
ONBOOT=yes
MTU=1500
NM_CONTROLLED=no
IPV6INIT=no
Best regards
Christoph
Am 26.06.2016 um 14:51 schrieb Edward Haas:
>
>
> On Thu, Jun 23, 2016 at 3:49 PM, <ovirt(a)timmi.org
> <mailto:ovirt@timmi.org>> wrote:
>
> Hi List,
>
> I have two nodes (running CentOS 7) and the network interface
> order changed for some interfaces after every reboot.
>
> The configurations are done through the oVirt GUI. So the
> ifcfg-ethX scripts are configured automatically by VDSM.
>
> Is there any option to get this configured to be stable?
>
> Best regards and thank you
>
> Christoph
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org <mailto:Users@ovirt.org>
> http://lists.ovirt.org/mailman/listinfo/users
>
>
> Hi Christoph,
>
> VDSM indeed edits and takes ownership of the interfaces for the
> networks it manages.
> However, editing the ifcfg files should not change anything in
> the order of the devices, unless it was originally set
> in an unsupported fashion. An ifcfg file is bound to a specific
> device name and I'm not familiar to device names
> floating around randomly.
> Perhaps you should elaborate more on what it means by 'order
> changed'.
>
> Here is an example of a setup we do not support (pre adding the
> host to Engine):
> The initial ifcfg file name: ifcfg-eth0
> The initial ifcfg file content: DEVICE="eth1"
> In this configuration, the name of the ifcfg file is inconsistent
> with the name of the device it represents.
> VDSM expects them to me in sync.
>
> Please provide the ifcfg files before and after you add the host
> to Engine.
>
> Thanks,
> Edy.
>
--------------DB1A7A23E942A9C9087F5394
Content-Type: text/html; charset=utf-8
Content-Transfer-Encoding: 8bit
<html>
<head>
<meta content="text/html; charset=utf-8"
http-equiv="Content-Type">
</head>
<body bgcolor="#FFFFFF" text="#000000">
<p>No I just eth0 was configured during OS installation. All other
interface have been configured through the oVirt GUI.</p>
<p>Best regards<br>
Christoph</p>
<p>Am 26.06.2016 um 16:08 schrieb Edward Haas:<br>
</p>
<blockquote
cite="mid:CALmkdFQQTmU8oxGTOZ90u=7wCd54rTShTOY+d2a80m_-0cC_3A@mail.gmail.com"
type="cite">
<div dir="ltr"><br>
<div class="gmail_extra"><br>
<div class="gmail_quote">On Sun, Jun 26, 2016 at 4:48 PM,
<span
dir="ltr"><<a moz-do-not-send="true"
href="mailto:ovirt@timmi.org"
target="_blank">ovirt(a)timmi.org</a>&gt;</span>
wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0
.8ex;border-left:1px #ccc solid;padding-left:1ex">
<div bgcolor="#FFFFFF" text="#000000"> Hi
Edy,<br>
<br>
please find some config files below. I did the interface
config only through the oVirt GUI.<br>
<br>
I mean by reordering that after every reboot some
interfaces are not the same as before. That means I need
to change the cables after reboot.<br>
</div>
</blockquote>
<div><br>
</div>
<div>This sounds like the problem Didi referenced to.<br>
<br>
</div>
<div>Before you configured the interfaces through oVirt,
wasn't there any ifcfg files?<br>
</div>
<div>(just to understand why you have not seen this before,
without vdsm on the host)<br>
</div>
<div> <br>
</div>
<blockquote class="gmail_quote" style="margin:0 0 0
.8ex;border-left:1px #ccc solid;padding-left:1ex">
<div bgcolor="#FFFFFF" text="#000000"> <br>
[root@lxedna ~]# cat
/etc/sysconfig/network-scripts/ifcfg-eth0<br>
# Generated by VDSM version 4.17.28-1.el7<br>
DEVICE=eth0<br>
ONBOOT=yes<br>
BOOTPROTO=dhcp<br>
MTU=1500<br>
DEFROUTE=yes<br>
NM_CONTROLLED=no<br>
IPV6INIT=no<br>
[root@lxedna ~]# cat
/etc/sysconfig/network-scripts/ifcfg-eth1<br>
# Generated by VDSM version 4.17.23-0.el7.centos<br>
DEVICE=eth1<br>
BRIDGE=Test-LAN-SW1<br>
ONBOOT=yes<br>
MTU=1500<br>
NM_CONTROLLED=no<br>
IPV6INIT=no<br>
[root@lxedna ~]# cat
/etc/sysconfig/network-scripts/ifcfg-eth2<br>
# Generated by VDSM version 4.17.23-0.el7.centos<br>
DEVICE=eth2<br>
BRIDGE=PC-LAN<br>
ONBOOT=yes<br>
MTU=1500<br>
NM_CONTROLLED=no<br>
IPV6INIT=no<br>
<br>
Best regards<br>
Christoph
<div>
<div class="h5"><br>
<br>
<div>Am 26.06.2016 um 14:51 schrieb Edward Haas:<br>
</div>
<blockquote type="cite">
<div dir="ltr"><br>
<div class="gmail_extra"><br>
<div class="gmail_quote">On Thu, Jun 23, 2016
at 3:49 PM, <span dir="ltr"><<a
moz-do-not-send="true"
href="mailto:ovirt@timmi.org"
target="_blank"><a
class="moz-txt-link-abbreviated"
href="mailto:ovirt@timmi.org">ovirt@timmi.org</a></a>></span>
wrote:<br>
<blockquote class="gmail_quote"
style="margin:0px 0px 0px
0.8ex;border-left:1px solid
rgb(204,204,204);padding-left:1ex">Hi
List,<br>
<br>
I have two nodes (running CentOS 7) and
the network interface order changed for
some interfaces after every reboot.<br>
<br>
The configurations are done through the
oVirt GUI. So the ifcfg-ethX scripts are
configured automatically by VDSM.<br>
<br>
Is there any option to get this configured
to be stable?<br>
<br>
Best regards and thank you<br>
<br>
Christoph<br>
<br>
_______________________________________________<br>
Users mailing list<br>
<a moz-do-not-send="true"
href="mailto:Users@ovirt.org"
target="_blank">Users(a)ovirt.org</a><br>
<a moz-do-not-send="true"
href="http://lists.ovirt.org/mailman/listinfo/users"
rel="noreferrer"
target="_blank">http://lists.ovirt.org/mailman/listinfo/user...
</blockquote>
</div>
<br>
</div>
<div class="gmail_extra">Hi Christoph,<br>
<br>
</div>
<div class="gmail_extra">VDSM indeed edits and
takes ownership of the interfaces for the
networks it manages.<br>
</div>
<div class="gmail_extra">However, editing the
ifcfg files should not change anything in the
order of the devices, unless it was originally
set <br>
in an unsupported fashion. An ifcfg file is
bound to a specific device name and I'm not
familiar to device names<br>
</div>
<div class="gmail_extra">floating around
randomly.<br>
</div>
<div class="gmail_extra">Perhaps you should
elaborate more on what it means by 'order
changed'.<br>
</div>
<div class="gmail_extra"><br>
Here is an example of a setup we do not
support (pre adding the host to Engine): <br>
The initial ifcfg file name: ifcfg-eth0<br>
</div>
<div class="gmail_extra">The initial ifcfg file
content: DEVICE="eth1"<br>
</div>
<div class="gmail_extra">In this configuration,
the name of the ifcfg file is inconsistent
with the name of the device it represents.<br>
</div>
<div class="gmail_extra">VDSM expects them to me
in sync.<br>
<br>
</div>
<div class="gmail_extra">Please provide the
ifcfg files before and after you add the host
to Engine.<br>
</div>
<div class="gmail_extra"><br>
</div>
<div class="gmail_extra">Thanks,<br>
</div>
<div class="gmail_extra">Edy.<br>
</div>
<div class="gmail_extra"><br>
</div>
</div>
</blockquote>
<br>
</div>
</div>
</div>
</blockquote>
</div>
<br>
</div>
</div>
</blockquote>
<br>
</body>
</html>
--------------DB1A7A23E942A9C9087F5394--
3163
days inactive
3167
days old
11 comments
5 participants
participants (5)
-
Dan Kenigsberg -
Edward Haas -
ovirt＠timmi.org -
Yedidyah Bar David -
Yevgeny Zaspitsky