7:38 p.m.
Hi everyone,
I'm testing oVirt 3.1 with a few different VM types, and I'm
experiencing boot issues with Fedora 16 and 17, 64bit. F17 hangs while
booting from the F17 install DVD. F16 installs normally (minimal
install), but hangs during the initial boot after installation. The F16
VM will boot to rescue mode, however.
The VM appears to get through the full boot process, but then the CPU
usage goes to 99 or 100% and the VM won't respond. I've tried with spice
and vnc consoles, with and without USB enabled. I've let it sit for
quite a while, and the VM CPU usage stays pegged, and the VMs remain
unresponsive.
CentOS 6.2 and Ubuntu 12.04 VMs, both 64bit, work normally on my oVirt
3.1 setup. Any idea what might be causing the issue, or how I might go
about debugging it?
Thanks, Jason
6:02 a.m.
New subject: [Users] On oVirt 3.1, Fedora 16 and 17 hang at boot
This is a message in Mime Format. If you see this, your mail reader does not support this
format.
--=_88bbcc3ec072f45f25994b8522135f61
Content-Type: text/plain; charset=utf-8
Content-Transfer-Encoding: quoted-printable
+1=0A=0A=D0=A1=D1=80=D0=B4 20 =D0=98=D1=8E=D0=BD 2012 20:38:09 +0400, Ja=
son Brooks =D0=BD=D0=B0=D0=BF=D0=B8=D1=81=D0=B0=D0=BB:=0AHi everyone,=
=0A=0AI'm testing oVirt 3.1 with a few different VM types, and I'm=0D=0A=
=0Aexperiencing boot issues with Fedora 16 and 17, 64bit. F17 hangs whil=
e=0D=0A=0Abooting from the F17 install DVD. F16 installs normally (minim=
al=0D=0A=0Ainstall), but hangs during the initial boot after installatio=
n. The F16=0D=0A=0AVM will boot to rescue mode, however.=0A=0AThe VM app=
ears to get through the full boot process, but then the CPU=0D=0A=0Ausag=
e goes to 99 or 100% and the VM won't respond. I've tried with spice=0D=
=0A=0Aand vnc consoles, with and without USB enabled. I've let it sit fo=
r=0D=0A=0Aquite a while, and the VM CPU usage stays pegged, and the VMs=
remain=0D=0A=0Aunresponsive.=0A=0ACentOS 6.2 and Ubuntu 12.04 VMs, both=
64bit, work normally on my oVirt=0D=0A=0A3.1 setup. Any idea what might=
be causing the issue, or how I might go=0D=0A=0Aabout debugging it?=0A=
=0AThanks, Jason=0D=0A=0A_______________________________________________=
=0D=0A=0AUsers mailing list=0D=0A=0AUsers@ovirt.org=0D=0A=0Ahttp://lists=
.ovirt.org/mailman/listinfo/users=0A=0A--
--=_88bbcc3ec072f45f25994b8522135f61
Content-Type: text/html; charset=utf-8
Content-Transfer-Encoding: quoted-printable
+1<br><br><br><br><br><font
color=3D"#666">=D0=A1=D1=80=D0=B4 20 =D0=98=
=D1=8E=D0=BD 2012 20:38:09 +0400, Jason Brooks &lt;jbrooks(a)redhat.com&gt=
; =D0=BD=D0=B0=D0=BF=D0=B8=D1=81=D0=B0=D0=BB:</font><br><blockquote styl=
e=3D"padding-left:10px; margin:10px 10px 10px 0px; border-left:#aaa 2px=
dotted">Hi everyone,=0D=0A<br>=0D=0A<br>I'm testing oVirt 3.1
with a fe=
w different VM types, and I'm=0D=0A<br>experiencing boot issues with Fed=
ora 16 and 17, 64bit. F17 hangs while=0D=0A<br>booting from the F17 inst=
all DVD. F16 installs normally (minimal=0D=0A<br>install), but hangs dur=
ing the initial boot after installation. The F16=0D=0A<br>VM will boot t=
o rescue mode, however.=0D=0A<br>=0D=0A<br>The VM appears to get through=
the full boot process, but then the CPU=0D=0A<br>usage goes to 99 or 10=
0% and the VM won't respond. I've tried with spice=0D=0A<br>and vnc cons=
oles, with and without USB enabled. I've let it sit for=0D=0A<br>quite a=
while, and the VM CPU usage stays pegged, and the VMs remain=0D=0A<br>u=
nresponsive.=0D=0A<br>=0D=0A<br>CentOS 6.2 and Ubuntu 12.04 VMs, both 64=
bit, work normally on my oVirt=0D=0A<br>3.1 setup. Any idea what might b=
e causing the issue, or how I might go=0D=0A<br>about debugging it?=0D=
=0A<br>=0D=0A<br>Thanks,
Jason=0D=0A<br>________________________________=
_______________=0D=0A<br>Users mailing list=0D=0A<br>Users(a)ovirt.org=0D=
=0A<br><a style=3D"border-bottom:1px dotted; text-decoration: none"
targ=
et=3D"_blank" href=3D"http://lists.ovirt.org/mailman/listinfo/users"
tit=
le=3D"=D0=9E=D1=82=D0=BA=D1=80=D1=8B=D1=82=D1=8C =D0=B2=D0=BD=D0=B5=D1=
=88=D0=BD=D1=8E=D1=8E =D1=81=D1=81=D1=8B=D0=BB=D0=BA=D1=83">http://lists=
.ovirt.org/mailman/listinfo/users</a>=0D=0A<br>=0D=0A<br></blockquote><b=
r><br>--<br>=0D=0A<br>
--=_88bbcc3ec072f45f25994b8522135f61--
6:35 a.m.
Hi,everyone
I have also met this problem recently,but I was just using vdsm to
create a vm and boot it to install FC16/17 instead of using ovirt-engine.
Maybe it is a bug or problem of vdsm.
I also met one problem:
After created a vm,after a while,trying to get info or shutdown the
vm,the vm will be not responding.
I have no idea whether the two problems are relative.
On 06/21/2012 12:38 AM, Jason Brooks wrote:
Hi everyone,
I'm testing oVirt 3.1 with a few different VM types, and I'm
experiencing boot issues with Fedora 16 and 17, 64bit. F17 hangs while
booting from the F17 install DVD. F16 installs normally (minimal
install), but hangs during the initial boot after installation. The F16
VM will boot to rescue mode, however.
The VM appears to get through the full boot process, but then the CPU
usage goes to 99 or 100% and the VM won't respond. I've tried with spice
and vnc consoles, with and without USB enabled. I've let it sit for
quite a while, and the VM CPU usage stays pegged, and the VMs remain
unresponsive.
CentOS 6.2 and Ubuntu 12.04 VMs, both 64bit, work normally on my oVirt
3.1 setup. Any idea what might be causing the issue, or how I might go
about debugging it?
Thanks, Jason
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
--
Best Regards,
Bing Bu Cao
9:18 a.m.
On 06/21/2012 06:35 AM, Bing Bu Cao wrote:
Hi,everyone
I have also met this problem recently,but I was just using vdsm to
create a vm and boot it to install FC16/17 instead of using ovirt-engine.
Maybe it is a bug or problem of vdsm.
I also met one problem:
After created a vm,after a while,trying to get info or shutdown the
vm,the vm will be not responding.
I have no idea whether the two problems are relative.
On 06/21/2012 12:38 AM, Jason Brooks wrote:
> Hi everyone,
>
> I'm testing oVirt 3.1 with a few different VM types, and I'm
> experiencing boot issues with Fedora 16 and 17, 64bit. F17 hangs while
> booting from the F17 install DVD. F16 installs normally (minimal
> install), but hangs during the initial boot after installation. The F16
> VM will boot to rescue mode, however.
>
> The VM appears to get through the full boot process, but then the CPU
> usage goes to 99 or 100% and the VM won't respond. I've tried with spice
> and vnc consoles, with and without USB enabled. I've let it sit for
> quite a while, and the VM CPU usage stays pegged, and the VMs remain
> unresponsive.
>
> CentOS 6.2 and Ubuntu 12.04 VMs, both 64bit, work normally on my oVirt
> 3.1 setup. Any idea what might be causing the issue, or how I might go
> about debugging it?
did you try ide disk instead of virtio? a VM without a nic?
6:37 p.m.
On 06/20/2012 11:18 PM, Itamar Heim wrote:
On 06/21/2012 06:35 AM, Bing Bu Cao wrote:
> Hi,everyone
>
> I have also met this problem recently,but I was just using vdsm to
> create a vm and boot it to install FC16/17 instead of using ovirt-engine.
>
> Maybe it is a bug or problem of vdsm.
> I also met one problem:
> After created a vm,after a while,trying to get info or shutdown the
> vm,the vm will be not responding.
>
> I have no idea whether the two problems are relative.
>
> On 06/21/2012 12:38 AM, Jason Brooks wrote:
>> Hi everyone,
>>
>> I'm testing oVirt 3.1 with a few different VM types, and I'm
>> experiencing boot issues with Fedora 16 and 17, 64bit. F17 hangs while
>> booting from the F17 install DVD. F16 installs normally (minimal
>> install), but hangs during the initial boot after installation. The F16
>> VM will boot to rescue mode, however.
>>
>> The VM appears to get through the full boot process, but then the CPU
>> usage goes to 99 or 100% and the VM won't respond. I've tried with spice
>> and vnc consoles, with and without USB enabled. I've let it sit for
>> quite a while, and the VM CPU usage stays pegged, and the VMs remain
>> unresponsive.
>>
>> CentOS 6.2 and Ubuntu 12.04 VMs, both 64bit, work normally on my oVirt
>> 3.1 setup. Any idea what might be causing the issue, or how I might go
>> about debugging it?
did you try ide disk instead of virtio? a VM without a nic?
I just tried booting from the F17 installer with each of these cases:
using an ide disk, using no disk, using e1000 nic, rtl8139 nic, no nic.
I've also tried with both preallocated and thin provisioned disks. All
the same: the F17 install dvd hangs at boot.
The same F17 dvd image, when accessed from the same nfs share via
virt-manager on my F17 notebook, works as expected.
The F16 dvd image boots at least, as does the boot.fedoraproject.org
image, though Fedora systems installed with either of those do not boot.
Maybe I'll try building a new vdsm to test.
Jason
6:41 p.m.
On 06/21/2012 11:37 AM, Jason Brooks wrote:
On 06/20/2012 11:18 PM, Itamar Heim wrote:
> On 06/21/2012 06:35 AM, Bing Bu Cao wrote:
>> Hi,everyone
>>
>> I have also met this problem recently,but I was just using vdsm to
>> create a vm and boot it to install FC16/17 instead of using ovirt-engine.
>>
>> Maybe it is a bug or problem of vdsm.
>> I also met one problem:
>> After created a vm,after a while,trying to get info or shutdown the
>> vm,the vm will be not responding.
>>
>> I have no idea whether the two problems are relative.
>>
>> On 06/21/2012 12:38 AM, Jason Brooks wrote:
>>> Hi everyone,
>>>
>>> I'm testing oVirt 3.1 with a few different VM types, and I'm
>>> experiencing boot issues with Fedora 16 and 17, 64bit. F17 hangs while
>>> booting from the F17 install DVD. F16 installs normally (minimal
>>> install), but hangs during the initial boot after installation. The F16
>>> VM will boot to rescue mode, however.
>>>
>>> The VM appears to get through the full boot process, but then the CPU
>>> usage goes to 99 or 100% and the VM won't respond. I've tried with
spice
>>> and vnc consoles, with and without USB enabled. I've let it sit for
>>> quite a while, and the VM CPU usage stays pegged, and the VMs remain
>>> unresponsive.
>>>
>>> CentOS 6.2 and Ubuntu 12.04 VMs, both 64bit, work normally on my oVirt
>>> 3.1 setup. Any idea what might be causing the issue, or how I might go
>>> about debugging it?
> did you try ide disk instead of virtio? a VM without a nic?
I just tried booting from the F17 installer with each of these cases:
using an ide disk, using no disk, using e1000 nic, rtl8139 nic, no nic.
I've also tried with both preallocated and thin provisioned disks. All
the same: the F17 install dvd hangs at boot.
Isn't there a bug regarding san
link causing issues with read-only medium?
Thanks
Robert
The same F17 dvd image, when accessed from the same nfs share via
virt-manager on my F17 notebook, works as expected.
The F16 dvd image boots at least, as does the boot.fedoraproject.org
image, though Fedora systems installed with either of those do not boot.
Maybe I'll try building a new vdsm to test.
Jason
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
6:43 p.m.
On 06/21/2012 08:41 AM, Robert Middleswarth wrote:
On 06/21/2012 11:37 AM, Jason Brooks wrote:
> On 06/20/2012 11:18 PM, Itamar Heim wrote:
>> On 06/21/2012 06:35 AM, Bing Bu Cao wrote:
>>> Hi,everyone
>>>
>>> I have also met this problem recently,but I was just using vdsm to
>>> create a vm and boot it to install FC16/17 instead of using
>>> ovirt-engine.
>>>
>>> Maybe it is a bug or problem of vdsm.
>>> I also met one problem:
>>> After created a vm,after a while,trying to get info or shutdown the
>>> vm,the vm will be not responding.
>>>
>>> I have no idea whether the two problems are relative.
>>>
>>> On 06/21/2012 12:38 AM, Jason Brooks wrote:
>>>> Hi everyone,
>>>>
>>>> I'm testing oVirt 3.1 with a few different VM types, and I'm
>>>> experiencing boot issues with Fedora 16 and 17, 64bit. F17 hangs while
>>>> booting from the F17 install DVD. F16 installs normally (minimal
>>>> install), but hangs during the initial boot after installation. The
>>>> F16
>>>> VM will boot to rescue mode, however.
>>>>
>>>> The VM appears to get through the full boot process, but then the CPU
>>>> usage goes to 99 or 100% and the VM won't respond. I've tried
with
>>>> spice
>>>> and vnc consoles, with and without USB enabled. I've let it sit for
>>>> quite a while, and the VM CPU usage stays pegged, and the VMs remain
>>>> unresponsive.
>>>>
>>>> CentOS 6.2 and Ubuntu 12.04 VMs, both 64bit, work normally on my oVirt
>>>> 3.1 setup. Any idea what might be causing the issue, or how I might go
>>>> about debugging it?
>> did you try ide disk instead of virtio? a VM without a nic?
> I just tried booting from the F17 installer with each of these cases:
> using an ide disk, using no disk, using e1000 nic, rtl8139 nic, no nic.
> I've also tried with both preallocated and thin provisioned disks. All
> the same: the F17 install dvd hangs at boot.
Isn't there a bug regarding san link causing issues with read-only medium?
That's right -- I've encountered that issue, too, but there's a fix for it.
This is a different issue, other distros are installing normally for me.
Thanks
Robert
>
> The same F17 dvd image, when accessed from the same nfs share via
> virt-manager on my F17 notebook, works as expected.
>
> The F16 dvd image boots at least, as does the boot.fedoraproject.org
> image, though Fedora systems installed with either of those do not boot.
>
> Maybe I'll try building a new vdsm to test.
>
> Jason
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
4538
days inactive
4539
days old
6 comments
5 participants
participants (5)
-
Bing Bu Cao -
Itamar Heim -
Jason Brooks -
ovirt＠qip.ru -
Robert Middleswarth