Hello Artem, May i know how did you deploy the Hosted Engine and glusterfs volumes? There is an easy way to do this using cockpit UI. You could log into cockpit UI, click on Hosted Engine tab and there are two radio buttons one for gluster deployment and another or HostedEngine deployment. 1) You could follow the gluster deployment screens which will create all the volumes required for HC setup and opens all the ports 2) Then you can continue over to HE deployment and make sure you provide the answer as 'yes' when the question 'Do you want to configure this host and its cluster for gluster?' and answer no for iptables. 3) Once done with HE , you could go over to the UI, add the first master domain (data) which imports hosted_storage and HE vm into the UI automatically. 4) Then you can add the addtional hosts & that is it, you are done. Hope this helps !!! Thanks kasturi On Thu, Nov 9, 2017 at 8:16 PM, Artem Tambovskiy <artem.tambovskiy(a)gmail.com > One more thing is - firewall rules. > > For 3 gluster bricks I have configured following: > firewall-cmd --zone=public --add-port=24007-24009/tcp > --add-port=49152-49664/tcp --permanent > > and this seems not enough. have to stop the firewall in order to make the > cluster working. > > I have noticed 490xx being used by gluster, any ideas on that documented > range? > > lsof -i | grep gluster | grep "490" > glusterfs 32301 root 10u IPv4 148985 0t0 TCP > ovirt1:49159->ovirt1:49099 (ESTABLISHED) > glusterfs 32301 root 17u IPv4 153084 0t0 TCP > ovirt1:49159->ovirt2:49096 (ESTABLISHED) > glusterfs 46346 root 17u IPv4 156437 0t0 TCP > ovirt1:49161->ovirt1:49093 (ESTABLISHED) > glusterfs 46346 root 18u IPv4 149985 0t0 TCP > ovirt1:49161->ovirt2:49090 (ESTABLISHED) > glusterfs 46380 root 8u IPv4 151389 0t0 TCP > ovirt1:49090->ovirt3:49161 (ESTABLISHED) > glusterfs 46380 root 11u IPv4 148986 0t0 TCP > ovirt1:49091->ovirt2:49161 (ESTABLISHED) > glusterfs 46380 root 21u IPv4 153074 0t0 TCP > ovirt1:49099->ovirt1:49159 (ESTABLISHED) > glusterfs 46380 root 25u IPv4 153075 0t0 TCP > ovirt1:49097->ovirt2:49160 (ESTABLISHED) > glusterfs 46380 root 26u IPv4 153076 0t0 TCP > ovirt1:49095->ovirt3:49159 (ESTABLISHED) > glusterfs 46380 root 27u IPv4 153077 0t0 TCP > ovirt1:49093->ovirt1:49161 (ESTABLISHED) > > Regards, > Artem > > On Thu, Nov 9, 2017 at 3:56 PM, Artem Tambovskiy < > artem.tambovskiy(a)gmail.com> >> Hi, >> >> Just realized that I probably went in the wrong way. Reinstalled >> everything from the scratch added 4 volumes (hosted_engine, data, export, >> iso). All looks good so far. >> But if go to the Cluster properties and tick the checkbox "Enable Cluster >> Service" - the host will be marked as Non-Operational. Am I messing up the >> things? >> Or I'm just fine as long as I already have a Data (Master) Storage Domain >> over GlusterFS? >> >> Regards, >> Artem >> >> On Thu, Nov 9, 2017 at 2:46 PM, Fred Rolland <frolland(a)redhat.com>> >>> Hi, >>> >>> The steps for this kind of setup are described in [1]. >>> However it seems you have already succeeded in installing, so maybe you >>> need some additional steps [2] >>> Did you add a storage domain that will act as Master Domain? It is >>> needed, then the initial Storage Domain should be imported automatically. >>> >>> >>> [1] https://www.ovirt.org/blog/2017/04/up-and-running-with-ovirt >>> -4.1-and-gluster-storage/ >>> [2] https://www.ovirt.org/documentation/gluster-hyperconverged/c >>> hap-Additional_Steps/ >>> >>> On Thu, Nov 9, 2017 at 10:50 AM, Artem Tambovskiy < >>> artem.tambovskiy(a)gmail.com>>> >>>> Another yet attempt to get a help on hosted-engine deployment with >>>> glusterfs cluster. >>>> I already spend a day trying to get bring such a setup to work with no >>>> luck. >>>> >>>> The hosted engine being successfully deployed but I can't activate the >>>> host, the storage domain for the host is missing and I can't even add it. >>>> So either something went wrong during deployment or my glusterfs cluster >>>> doesn't configured properly. >>>> >>>> That are the prerequisites for this? >>>> >>>> - glusterfs cluster of 3 nodes with replica 3 volume >>>> - Any specific volume configs? >>>> - how many volumes should I prepare for hosted engine deployment? >>>> >>>> Any other thoughts? >>>> >>>> Regards, >>>> Artem >>>> >>>> _______________________________________________ >>>> Users mailing list >>>> Users(a)ovirt.org >>>> http://lists.ovirt.org/mailman/listinfo/users >>>> >>>> >>> >> > > _______________________________________________ > Users mailing list > Users(a)ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > >