7:11 p.m.
Hi Guys,
I've a 3 machine pool running gluster with replica 3 and want to add two
more machines.
This would change to a replica 5...
In ovirt 4.0, I'd done everything manually. No problem there.
In ovirt 4.2, I'd used the wizard for the hosted-engine. It looks like
the fourth node has been added to the pool but will not go active. It
complains gluster isn't running (which I've not manually configured
/dev/sdb for gluster). Host install+deploy fails. Host can go into
maintenance w/o issue. (Meaning the host has been added to the cluster,
but isn't operational)
What do I need to do to get the node up and running proper with gluster
syncing properly? Manually restarting gluster, tells me there's no peers
and no volumes.
Do we have a wizard for this too? Or do I need to go find the setup
scripts and configure hosts 4 + 5 manually and run the deploy again?
Thanks,
Hanson
1:12 p.m.
On Tue, Mar 20, 2018 at 9:41 PM, Hanson Turner <hanson(a)andrewswireless.net>
wrote:
Hi Guys,
I've a 3 machine pool running gluster with replica 3 and want to add two
more machines.
This would change to a replica 5...
Adding 2 more nodes to cluster will not change it to a replica 5. replica 3
is a configuration on the gluster volume. I assume you don't need a replica
5, but just to add more nodes (and possibly new gluster volumes) to the
cluster?
In ovirt 4.0, I'd done everything manually. No problem there.
In ovirt 4.2, I'd used the wizard for the hosted-engine. It looks like the
fourth node has been added to the pool but will not go active. It complains
gluster isn't running (which I've not manually configured /dev/sdb for
gluster). Host install+deploy fails. Host can go into maintenance w/o
issue. (Meaning the host has been added to the cluster, but isn't
operational)
Are the repos configured correctly on the new nodes? Does the oVirt cluster
where the nodes are being added have "Enable Gluster Service" enabled?
What do I need to do to get the node up and running proper with
gluster
syncing properly? Manually restarting gluster, tells me there's no peers
and no volumes.
Do we have a wizard for this too? Or do I need to go find the setup
scripts and configure hosts 4 + 5 manually and run the deploy again?
The host addition flow should take care of installing gluster.
Can you share the engine log from when the host was added to when it's
reported non-operational?
Thanks,
Hanson
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
4:31 p.m.
This is a multi-part message in MIME format.
--------------ECCD225C85F528E1A408BF7A
Content-Type: text/plain; charset=utf-8; format=flowed
Content-Transfer-Encoding: 7bit
Hi Sahina,
On the fourth node, I've found
/var/log/glusterfs/rhev-data-center-mnt-glusterSD-ovirtnode1.core\:_engine.log
... is this the engine.log you're referring to or do you want one from
the hosted engine?
I actually do want to go replica 5. Most VM's it runs are small(1
Core,1gb Ram,8gb HDD) and HA is needed. I'd like a bigger critical
margin than one node failing.
As far as the repos, it's a straight the ovirtnode iso install, I think
it's Node 4.2.0... which is yum updated to 4.2.1.1
When I installed 4.0 I'd installed on top of centos. This round I went
straight with the node os because of simplicity in updating.
I can manually restart gluster from cli, the peer and volume status show
no peers or volumes.
One thing of note, the networking is still as setup from the node
install. I cannot change the networking info from the ovirt
gui/dashboard. The host goes unresponsive and then another host power
cycles it.
Thanks,
Hanson
On 03/21/2018 06:12 AM, Sahina Bose wrote:
On Tue, Mar 20, 2018 at 9:41 PM, Hanson Turner
<hanson(a)andrewswireless.net <mailto:hanson@andrewswireless.net>> wrote:
Hi Guys,
I've a 3 machine pool running gluster with replica 3 and want to
add two more machines.
This would change to a replica 5...
Adding 2 more nodes to cluster will not change it to a replica 5.
replica 3 is a configuration on the gluster volume. I assume you don't
need a replica 5, but just to add more nodes (and possibly new gluster
volumes) to the cluster?
In ovirt 4.0, I'd done everything manually. No problem there.
In ovirt 4.2, I'd used the wizard for the hosted-engine. It looks
like the fourth node has been added to the pool but will not go
active. It complains gluster isn't running (which I've not
manually configured /dev/sdb for gluster). Host install+deploy
fails. Host can go into maintenance w/o issue. (Meaning the host
has been added to the cluster, but isn't operational)
Are the repos configured correctly on the new nodes? Does the oVirt
cluster where the nodes are being added have "Enable Gluster Service"
enabled?
What do I need to do to get the node up and running proper with
gluster syncing properly? Manually restarting gluster, tells me
there's no peers and no volumes.
Do we have a wizard for this too? Or do I need to go find the
setup scripts and configure hosts 4 + 5 manually and run the
deploy again?
The host addition flow should take care of installing gluster.
Can you share the engine log from when the host was added to when it's
reported non-operational?
Thanks,
Hanson
_______________________________________________
Users mailing list
Users(a)ovirt.org <mailto:Users@ovirt.org>
http://lists.ovirt.org/mailman/listinfo/users
<http://lists.ovirt.org/mailman/listinfo/users>
--------------ECCD225C85F528E1A408BF7A
Content-Type: text/html; charset=utf-8
Content-Transfer-Encoding: 7bit
<html>
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=utf-8">
</head>
<body text="#000000" bgcolor="#FFFFFF">
<p>Hi Sahina,</p>
<p>On the fourth node, I've found
/var/log/glusterfs/rhev-data-center-mnt-glusterSD-ovirtnode1.core\:_engine.log
... is this the engine.log you're referring to or do you want one
from the hosted engine?</p>
I actually do want to go replica 5. Most VM's it runs are small(1
Core,1gb Ram,8gb HDD) and HA is needed. I'd like a bigger critical
margin than one node failing.<br>
<br>
As far as the repos, it's a straight the ovirtnode iso install, I
think it's Node 4.2.0... which is yum updated to 4.2.1.1<br>
When I installed 4.0 I'd installed on top of centos. This round I
went straight with the node os because of simplicity in updating.<br>
<br>
I can manually restart gluster from cli, the peer and volume status
show no peers or volumes.<br>
<br>
One thing of note, the networking is still as setup from the node
install. I cannot change the networking info from the ovirt
gui/dashboard. The host goes unresponsive and then another host
power cycles it.<br>
<br>
Thanks,<br>
Hanson<br>
<br>
<div class="moz-cite-prefix">On 03/21/2018 06:12 AM, Sahina Bose
wrote:<br>
</div>
<blockquote type="cite"
cite="mid:CACjzOveQ1xybAYR05bnw0FHV9p+ONPjRGzS6-FqeNQ+bAbzq0Q@mail.gmail.com">
<div dir="ltr"><br>
<div class="gmail_extra"><br>
<div class="gmail_quote">On Tue, Mar 20, 2018 at 9:41 PM,
Hanson Turner <span dir="ltr"><<a
href="mailto:hanson@andrewswireless.net"
target="_blank"
moz-do-not-send="true">hanson(a)andrewswireless.net</a>&gt;</span>
wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0
.8ex;border-left:1px #ccc solid;padding-left:1ex">Hi
Guys,<br>
<br>
I've a 3 machine pool running gluster with replica 3 and
want to add two more machines.<br>
<br>
This would change to a replica 5...<br>
</blockquote>
<div><br>
</div>
<div>Adding 2 more nodes to cluster will not change it to a
replica 5. replica 3 is a configuration on the gluster
volume. I assume you don't need a replica 5, but just to
add more nodes (and possibly new gluster volumes) to the
cluster?</div>
<div><br>
</div>
<blockquote class="gmail_quote" style="margin:0 0 0
.8ex;border-left:1px #ccc solid;padding-left:1ex">
<br>
In ovirt 4.0, I'd done everything manually. No problem
there.<br>
<br>
In ovirt 4.2, I'd used the wizard for the hosted-engine.
It looks like the fourth node has been added to the pool
but will not go active. It complains gluster isn't running
(which I've not manually configured /dev/sdb for gluster).
Host install+deploy fails. Host can go into maintenance
w/o issue. (Meaning the host has been added to the
cluster, but isn't operational)<br>
</blockquote>
<div><br>
</div>
<div>Are the repos configured correctly on the new nodes?
Does the oVirt cluster where the nodes are being added
have "Enable Gluster Service" enabled? <br>
</div>
<div><br>
</div>
<blockquote class="gmail_quote" style="margin:0 0 0
.8ex;border-left:1px #ccc solid;padding-left:1ex">
<br>
What do I need to do to get the node up and running proper
with gluster syncing properly? Manually restarting
gluster, tells me there's no peers and no volumes.<br>
<br>
Do we have a wizard for this too? Or do I need to go find
the setup scripts and configure hosts 4 + 5 manually and
run the deploy again?<br>
</blockquote>
<div><br>
</div>
<div>The host addition flow should take care of installing
gluster.</div>
<div>Can you share the engine log from when the host was
added to when it's reported non-operational?</div>
<div><br>
</div>
<blockquote class="gmail_quote" style="margin:0 0 0
.8ex;border-left:1px #ccc solid;padding-left:1ex">
<br>
<br>
Thanks,<br>
<br>
Hanson<br>
<br>
______________________________<wbr>_________________<br>
Users mailing list<br>
<a href="mailto:Users@ovirt.org" target="_blank"
moz-do-not-send="true">Users(a)ovirt.org</a><br>
<a href="http://lists.ovirt.org/mailman/listinfo/users"
rel="noreferrer" target="_blank"
moz-do-not-send="true">http://lists.ovirt.org/mailman<wbr...
<br>
<br>
</blockquote>
</div>
<br>
</div>
</div>
</blockquote>
<br>
</body>
</html>
--------------ECCD225C85F528E1A408BF7A--
12:14 p.m.
On Wed, Mar 21, 2018 at 7:01 PM, Hanson Turner <hanson(a)andrewswireless.net>
wrote:
Hi Sahina,
On the fourth node, I've found /var/log/glusterfs/rhev-data-
center-mnt-glusterSD-ovirtnode1.core\:_engine.log ... is this the
engine.log you're referring to or do you want one from the hosted engine?
I was referring to oVirt's engine.log. Found under
/var/log/ovirt-engine/engine.log
I actually do want to go replica 5. Most VM's it runs are small(1 Core,1gb
Ram,8gb HDD) and HA is needed. I'd like a bigger critical margin
than one
node failing.
Ok, in this case - in addition to adding the new nodes to cluster, you will
also need to add bricks to the volume and increase the replica count to 5.
You can do this using the "Add Bricks" from the Bricks tab on selection of
a gluster volume. Ensure that you set the replica count to 5 here. This
should be done once you successfully add the new hosts to the cluster.
As far as the repos, it's a straight the ovirtnode iso install, I
think
it's Node 4.2.0... which is yum updated to 4.2.1.1
When I installed 4.0 I'd installed on top of centos. This round I went
straight with the node os because of simplicity in updating.
I can manually restart gluster from cli, the peer and volume status show
no peers or volumes.
This is because the nodes have not been added (or peer probed) to existing
gluster cluster.
I will need the logs I requested to understand why.
One thing of note, the networking is still as setup from the node
install.
I cannot change the networking info from the ovirt gui/dashboard. The host
goes unresponsive and then another host power cycles it.
Thanks,
Hanson
On 03/21/2018 06:12 AM, Sahina Bose wrote:
On Tue, Mar 20, 2018 at 9:41 PM, Hanson Turner <hanson(a)andrewswireless.net
> wrote:
> Hi Guys,
>
> I've a 3 machine pool running gluster with replica 3 and want to add two
> more machines.
>
> This would change to a replica 5...
>
Adding 2 more nodes to cluster will not change it to a replica 5. replica
3 is a configuration on the gluster volume. I assume you don't need a
replica 5, but just to add more nodes (and possibly new gluster volumes) to
the cluster?
> In ovirt 4.0, I'd done everything manually. No problem there.
>
> In ovirt 4.2, I'd used the wizard for the hosted-engine. It looks like
> the fourth node has been added to the pool but will not go active. It
> complains gluster isn't running (which I've not manually configured
> /dev/sdb for gluster). Host install+deploy fails. Host can go into
> maintenance w/o issue. (Meaning the host has been added to the cluster, but
> isn't operational)
>
Are the repos configured correctly on the new nodes? Does the oVirt
cluster where the nodes are being added have "Enable Gluster Service"
enabled?
> What do I need to do to get the node up and running proper with gluster
> syncing properly? Manually restarting gluster, tells me there's no peers
> and no volumes.
>
> Do we have a wizard for this too? Or do I need to go find the setup
> scripts and configure hosts 4 + 5 manually and run the deploy again?
>
The host addition flow should take care of installing gluster.
Can you share the engine log from when the host was added to when it's
reported non-operational?
>
> Thanks,
>
> Hanson
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>
>
2437
days inactive
2439
days old
3 comments
2 participants
participants (2)
-
Hanson Turner -
Sahina Bose