5:55 p.m.
At this point I'm wondering if there is anyone in the community that
freelances and would be willing to provide remote support to resolve this
issue?
We are running with 1/2 our normal hosts, and not being able to add anymore
back into the cluster is a serious problem.
Best regards,
***
*Mark Steele*
CIO / VP Technical Operations | TelVue Corporation
TelVue - We Share Your Vision
16000 Horizon Way, Suite 100 | Mt. Laurel, NJ 08054
800.885.8886 x128 | msteele(a)telvue.com | http://www.telvue.com
twitter: http://twitter.com/telvue | facebook:
https://www.facebook.com/telvue
On Sat, Feb 17, 2018 at 12:53 PM, Mark Steele <msteele(a)telvue.com> wrote:
Yaniv,
I have one of my developers assisting me and we are continuing to run into
issues. This is a note from him:
Hi, I'm trying to add a host to ovirt, but I'm running into package
dependency problems. I have existing hosts that are working and integrated
properly, and inspecting those, I am able to match the packages between the
new host and the existing, but when I then try to add the new host to
ovirt, it fails on reinstall because it's trying to install packages that
are later versions. does the installation run list from ovirt-release35
002-1 have unspecified versions? The working hosts use libvirt-1.1.1-29,
and vdsm-4.16.7, but it's trying to install vdsm-4.16.30, which requires a
higher version of libvirt, at which point, the installation fails. is there
some way I can specify which package versions the ovirt install procedure
uses? or better yet, skip the package management step entirely?
***
*Mark Steele*
CIO / VP Technical Operations | TelVue Corporation
TelVue - We Share Your Vision
16000 Horizon Way, Suite 100 | Mt. Laurel, NJ 08054
800.885.8886 x128 <(800)%20885-8886> | msteele(a)telvue.com | http://
www.telvue.com
twitter: http://twitter.com/telvue | facebook: https://www.
facebook.com/telvue
On Sat, Feb 17, 2018 at 2:32 AM, Yaniv Kaul <ykaul(a)redhat.com> wrote:
>
>
> On Fri, Feb 16, 2018 at 11:14 PM, Mark Steele <msteele(a)telvue.com> wrote:
>
>> We are using CentOS Linux release 7.0.1406 (Core) and oVirt Engine
>> Version: 3.5.0.1-1.el6
>>
>
> You are seeing https://bugzilla.redhat.com/show_bug.cgi?id=1444426 ,
> which is a result of a default change of libvirt and was fixed in later
> versions of oVirt than the one you are using.
> See patch https://gerrit.ovirt.org/#/c/76934/ for how it was fixed, you
> can probably configure it manually.
> Y.
>
>
>>
>> We have four other hosts that are running this same configuration
>> already. I took one host out of the cluster (forcefully) that was working
>> and now it will not add back in either - throwing the same SASL error.
>>
>> We are looking at downgrading libvirt as I've seen that somewhere else -
>> is there another version of RH I should be trying? I have a host I can put
>> it on.
>>
>>
>>
>> ***
>> *Mark Steele*
>> CIO / VP Technical Operations | TelVue Corporation
>> TelVue - We Share Your Vision
>> 16000 Horizon Way, Suite 100 | Mt. Laurel, NJ 08054
>>
<https://maps.google.com/?q=16000+Horizon+Way,+Suite+100+%7C+Mt.+Laurel,+N...
>> 800.885.8886 x128 <(800)%20885-8886> | msteele(a)telvue.com | http://
>> www.telvue.com
>> twitter: http://twitter.com/telvue | facebook: https://www.facebook
>> .com/telvue
>>
>> On Fri, Feb 16, 2018 at 3:31 PM, Yaniv Kaul <ykaul(a)redhat.com> wrote:
>>
>>>
>>>
>>> On Feb 16, 2018 6:47 PM, "Mark Steele" <msteele(a)telvue.com>
wrote:
>>>
>>> Hello all,
>>>
>>> We recently had a network event where we lost access to our storage for
>>> a period of time. The Cluster basically shut down all our VM's and in
the
>>> process we had three HV's that went offline and would not communicate
>>> properly with the cluster.
>>>
>>> We have since completely reinstalled CentOS on the hosts and attempted
>>> to install them into the cluster with no joy. We've gotten to the point
>>> where we generally get an error message in the web gui:
>>>
>>>
>>> Which EL release and which oVirt release are you using? My guess would
>>> be latest EL, with an older oVirt?
>>> Y.
>>>
>>>
>>> Stage: Misc Configuration
>>> Host hv-ausa-02 installation failed. Command returned failure code 1
>>> during SSH session 'root(a)10.1.90.154'.
>>>
>>> the following is what we are seeing in the messages log:
>>>
>>> Feb 16 11:39:53 hv-ausa-02 vdsm-tool: libvirt: XML-RPC error :
>>> authentication failed: authentication failed
>>> Feb 16 11:39:53 hv-ausa-02 libvirtd: 2018-02-16 16:39:53.761+0000:
>>> 15231: error : virNetSASLSessionListMechanisms:390 : internal error:
>>> cannot list SASL mechanisms -4 (SASL(-4): no mechanism available: Internal
>>> Error -4 in server.c near line 1757)
>>> Feb 16 11:39:53 hv-ausa-02 libvirtd: 2018-02-16 16:39:53.761+0000:
>>> 15231: error : remoteDispatchAuthSaslInit:3411 : authentication
>>> failed: authentication failed
>>> Feb 16 11:39:53 hv-ausa-02 libvirtd: 2018-02-16 16:39:53.761+0000:
>>> 15226: error : virNetSocketReadWire:1808 : End of file while reading data:
>>> Input/output error
>>> Feb 16 11:39:53 hv-ausa-02 vdsm-tool: libvirt: XML-RPC error :
>>> authentication failed: authentication failed
>>> Feb 16 11:39:53 hv-ausa-02 libvirtd: 2018-02-16 16:39:53.962+0000:
>>> 15233: error : virNetSASLSessionListMechanisms:390 : internal error:
>>> cannot list SASL mechanisms -4 (SASL(-4): no mechanism available: Internal
>>> Error -4 in server.c near line 1757)
>>> Feb 16 11:39:53 hv-ausa-02 libvirtd: 2018-02-16 16:39:53.963+0000:
>>> 15233: error : remoteDispatchAuthSaslInit:3411 : authentication
>>> failed: authentication failed
>>> Feb 16 11:39:53 hv-ausa-02 libvirtd: 2018-02-16 16:39:53.963+0000:
>>> 15226: error : virNetSocketReadWire:1808 : End of file while reading data:
>>> Input/output error
>>> Feb 16 11:39:53 hv-ausa-02 vdsm-tool: libvirt: XML-RPC error :
>>> authentication failed: authentication failed
>>> Feb 16 11:39:53 hv-ausa-02 vdsm-tool: Traceback (most recent call last):
>>> Feb 16 11:39:53 hv-ausa-02 vdsm-tool: File "/usr/bin/vdsm-tool",
line
>>> 219, in main
>>> Feb 16 11:39:53 hv-ausa-02 vdsm-tool: return
>>> tool_command[cmd]["command"](*args)
>>> Feb 16 11:39:53 hv-ausa-02 vdsm-tool: File
>>>
"/usr/lib/python2.7/site-packages/vdsm/tool/upgrade_300_networks.py",
>>> line 83, in upgrade_networks
>>> Feb 16 11:39:53 hv-ausa-02 vdsm-tool: networks = netinfo.networks()
>>> Feb 16 11:39:53 hv-ausa-02 vdsm-tool: File
>>> "/usr/lib/python2.7/site-packages/vdsm/netinfo.py", line 112, in
>>> networks
>>> Feb 16 11:39:53 hv-ausa-02 vdsm-tool: conn = libvirtconnection.get()
>>> Feb 16 11:39:53 hv-ausa-02 vdsm-tool: File
>>> "/usr/lib/python2.7/site-packages/vdsm/libvirtconnection.py", line
>>> 159, in get
>>> Feb 16 11:39:53 hv-ausa-02 vdsm-tool: conn = _open_qemu_connection()
>>> Feb 16 11:39:53 hv-ausa-02 vdsm-tool: File
>>> "/usr/lib/python2.7/site-packages/vdsm/libvirtconnection.py", line
95,
>>> in _open_qemu_connection
>>> Feb 16 11:39:53 hv-ausa-02 vdsm-tool: return utils.retry(libvirtOpen,
>>> timeout=10, sleep=0.2)
>>> Feb 16 11:39:53 hv-ausa-02 vdsm-tool: File
>>> "/usr/lib/python2.7/site-packages/vdsm/utils.py", line 1108, in
retry
>>> Feb 16 11:39:53 hv-ausa-02 vdsm-tool: return func()
>>> Feb 16 11:39:53 hv-ausa-02 vdsm-tool: File
>>> "/usr/lib64/python2.7/site-packages/libvirt.py", line 105, in
openAuth
>>> Feb 16 11:39:53 hv-ausa-02 vdsm-tool: if ret is None:raise
>>> libvirtError('virConnectOpenAuth() failed')
>>> Feb 16 11:39:53 hv-ausa-02 vdsm-tool: libvirtError: authentication
>>> failed: authentication failed
>>> Feb 16 11:39:53 hv-ausa-02 systemd: vdsm-network.service: control
>>> process exited, code=exited status=1
>>> Feb 16 11:39:53 hv-ausa-02 systemd: Failed to start Virtual Desktop
>>> Server Manager network restoration.
>>> Feb 16 11:39:53 hv-ausa-02 systemd: Dependency failed for Virtual
>>> Desktop Server Manager.
>>> Feb 16 11:39:53 hv-ausa-02 systemd: Job vdsmd.service/start failed with
>>> result 'dependency'.
>>> Feb 16 11:39:53 hv-ausa-02 systemd: Unit vdsm-network.service entered
>>> failed state.
>>> Feb 16 11:39:53 hv-ausa-02 systemd: vdsm-network.service failed.
>>> Feb 16 11:40:01 hv-ausa-02 systemd: Started Session 10 of user root.
>>> Feb 16 11:40:01 hv-ausa-02 systemd: Starting Session 10 of user root.
>>> Feb 16 11:40:01 hv-ausa-02 systemd: Started Session 11 of user root.
>>> Feb 16 11:40:01 hv-ausa-02 systemd: Starting Session 11 of user root.
>>>
>>> Can someone point me in the right direction to resolve this - it seems
>>> to be a SASL issue perhaps?
>>>
>>> ***
>>> *Mark Steele*
>>> CIO / VP Technical Operations | TelVue Corporation
>>> TelVue - We Share Your Vision
>>> 16000 Horizon Way, Suite 100 | Mt. Laurel, NJ 08054
>>>
<https://maps.google.com/?q=16000+Horizon+Way,+Suite+100+%7C+Mt.+Laurel,+N...
>>> 800.885.8886 x128 <(800)%20885-8886> | msteele(a)telvue.com | http://
>>> www.telvue.com
>>> twitter: http://twitter.com/telvue | facebook: https://www.facebook
>>> .com/telvue
>>>
>>> _______________________________________________
>>> Users mailing list
>>> Users(a)ovirt.org
>>> http://lists.ovirt.org/mailman/listinfo/users
>>>
>>>
>>>
>>
>