5:12 p.m.
----- Original Message -----
From: "Renchu Mathew" <renchu(a)cracknell.com>
To: "Martin Perina" <mperina(a)redhat.com>
Cc: users(a)ovirt.org
Sent: Thursday, January 22, 2015 2:39:43 PM
Subject: RE: [ovirt-users] Power Management config on Ovirt
Hi Martin,
Yes. The vdsm host.log is from node-02.
That's strange, I cannot find any call to fenceNode which should appear, if
PM status is gathered.
Eli, any idea?
I have checked the link and it says
we need to install the sever view management agent & net-snmp on the hosts.
Do we need to try this? How to install this on node? I used the below irmc
admin user.
Not, AFAIK this is needed only from Clustersuite, but not for oVirt.
But could you please execute this command on node-20 just to confirm that
Fujitsu Primergy is communicating through IPMI:
fence_ipmilan -a IP -l USER -p PASS -o status -v -P
where IP is IPMI address (from the log it should be 192.168.1.114)
USER and PASS please set according to you setup.
Thanks
Martin
[cid:image001.png@01D03669.DD48B4E0]
Regards
Renchu Mathew | Sr. IT Administrator
CRACKNELL DUBAI | P.O. Box 66231 | United Arab Emirates | T +971 4
3445417 | F +971 4 3493675 | M +971 50 7386484
ABU DHABI | DUBAI | LONDON | MUSCAT | DOHA | JEDDAH
EMAIL renchu(a)cracknell.com | WEB www.cracknell.com
This email, its content and any files transmitted with it are intended solely
for the addressee(s) and may be legally privileged and/or confidential. If
you are not the intended recipient please let us know by email reply and
delete it from the system. Please note that any views or opinions presented
in this email do not necessarily represent those of the company. Email
transmissions cannot be guaranteed to be secure or error-free as information
could be intercepted, corrupted, lost, destroyed, arrive late or incomplete,
or contain viruses. The company therefore does not accept liability for any
errors or omissions in the contents of this message which arise as a result
of email transmission.
-----Original Message-----
From: Martin Perina [mailto:mperina@redhat.com]
Sent: Thursday, January 22, 2015 4:49 PM
To: Renchu Mathew
Cc: users(a)ovirt.org
Subject: Re: [ovirt-users] Power Management config on Ovirt
Hi,
according to [1] Fujitsu iRMC should be accessible using IPMI.
Now, I looked at logs, but I cannot see any fenceNode exection in vdsm.log.
According to engine.log, host Node-02.cracknell.com was used as fence proxy.
Are you sure that vdsm.log is from this host?
Thanks
Martin
[1] https://www.redhat.com/archives/linux-cluster/2010-January/msg00056.html
----- Original Message -----
> From: "Renchu Mathew" <renchu(a)cracknell.com>
> To: "Martin Perina" <mperina(a)redhat.com>
> Cc: users(a)ovirt.org
> Sent: Thursday, January 22, 2015 12:37:51 PM
> Subject: RE: [ovirt-users] Power Management config on Ovirt
>
> Hi Martin,
>
> Please find attached log files from engine and proxy host. Not sure
> whether IPMI or which one can be used. It is Fujitsu iRMC port. I also
> tried the rsb but same error.
>
> Can we configure Power management using Fujitsu iRMC?
>
> Thanks & Regards
>
> Renchu Mathew
>
> -----Original Message-----
> From: Martin Perina [mailto:mperina@redhat.com]
> Sent: Thursday, January 22, 2015 1:58 PM
> To: Renchu Mathew
> Cc: users(a)ovirt.org
> Subject: Re: [ovirt-users] Power Management config on Ovirt
>
> Hi,
>
> first of all are you sure that Fujitsu PRIMERGY is accessible using
> IPMI protocol? If so, could you provide engine.log and also vdsm.log
> from host that was used as fencing proxy? You can find out which host
> is used as a proxy either in Events tab after you execute the test or in
> engine.log.
>
> Thanks
>
> Martin Perina
>
> ----- Original Message -----
> > From: "Renchu Mathew" <renchu(a)cracknell.com>
> > To: users(a)ovirt.org
> > Sent: Thursday, January 22, 2015 7:41:43 AM
> > Subject: [ovirt-users] Power Management config on Ovirt
> >
> >
> >
> > Dear all,
> >
> >
> >
> > I am trying to configure power management on ovirt v3.5
> > (ovirt-node-iso-3.5.0.ovirt35.20140912.el6) and using two Fujitsu
> > PRIMERGY
> > RX2540 M1 as node hypervisor. I used Fujitsu iRMC port on power
> > management configuration. The test gives a message “Test failed,
> > argument of type ‘NoneType’ is not iterable” as below . Also tried
> > rsb type as per redhat document.
> >
> >
> >
> > Fence-agents-3.1.5-35.el6_5.4.x86_64 is there on both nodes. Do we
> > need to specify anything in Options?
> >
> >
> >
> > Please help me.
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > Best Regards
> >
> >
> >
> >
> >
> > Renchu Mathew
> >
> >
> >
> >
> >
> > _______________________________________________
> > Users mailing list
> > Users@ovirt.org<mailto:Users@ovirt.org>
> > http://lists.ovirt.org/mailman/listinfo/users
> >
>