Re: [Users] [vdsm] Remove and Add host does not work

On 02/28/2012 03:22 PM, Deepak C Shetty wrote: > On 02/28/2012 06:46 PM, Itamar Heim wrote: >> On 02/28/2012 02:48 PM, Deepak C Shetty wrote: >>> Hi, >>> I had a host managed via OE, completely working fine. Was even able to >>> create and run VMs off it. >>> I tried removing the host from the OE (put host into maint. mode and >>> then remove) and when i re-discover >>> the same host, OE just keeps seeing it as Non-responsive. >> >> what do you mean by "re-discover"? >> I just meant that i removed the host and re-added it by selecting "New" > on the Hosts tab > and putting the IP and hostname. > >>> >>> I am able to ssh into the host and see that none of the vdsm processes >>> have been started. >>> I tried doing "Confirm host has been rebooted" on the OE, did not >>> help. >>> I tried putting >>> host into maint. mode and re-activating the host, just doesn't help >> >> did you do any change to the host? >> just removing it from engine shouldn't cause vdsm to know/care and >> should work just like before. >> Nothing changed on the host. In fact when i removed and added the > host back > it says everything is installed so does nothing but reboots the host, > post reboot > vdsm does not start automatically.... and host status is non-responsive > on OE if vdsm does not start, OE is correct... does vdsm try to start and fails (and if so, log excerpt?)