1:39 p.m.
HI
Installed hosted engine and after configuring IP to ovirt engine unable
to ping the gateway and found that there is no issue with the Network .
Is there any thing am missing while installing Hosted engine ? below is
output details,
--== CONFIGURATION PREVIEW ==--
Engine FQDN : oe.bnglab.psecure.net
Bridge name : ovirtmgmt
SSH daemon port : 22
Gateway address : 10.206.67.254
Host name for web application : hosted_engine_1
Host ID : 1
Image alias : hosted_engine
Image size GB : 25
Storage connection : 10.204.207.152:/home/heoe
Console type : vnc
Memory size MB : 4096
MAC address : 00:16:3e:2f:5c:40
Boot type : cdrom
Number of CPUs : 2
ISO image (for cdrom boot) :
/ovirt/CentOS-6.7-x86_64-minimal.iso
CPU Type : model_SandyBridge
Please confirm installation settings (Yes, No)[Yes]: yes
[ INFO ] Stage: Transaction setup
[ INFO ] Stage: Misc configuration
[ INFO ] Stage: Package installation
[ INFO ] Stage: Misc configuration
[ INFO ] Configuring libvirt
[ INFO ] Configuring VDSM
[ INFO ] Starting vdsmd
[ INFO ] Waiting for VDSM hardware info
[ INFO ] Waiting for VDSM hardware info
[ INFO ] Creating Storage Domain
[ INFO ] Creating Storage Pool
[ INFO ] Connecting Storage Pool
[ INFO ] Verifying sanlock lockspace initialization
[ INFO ] Creating VM Image
[ INFO ] Disconnecting Storage Pool
[ INFO ] Start monitoring domain
[ INFO ] Configuring VM
[ INFO ] Updating hosted-engine configuration
[ INFO ] Stage: Transaction commit
[ INFO ] Stage: Closing up
The following network ports should be opened:
tcp:5900
tcp:5901
udp:5900
udp:5901
An example of the required configuration for iptables can be
found at:
/etc/ovirt-hosted-engine/iptables.example
In order to configure firewalld, copy the files from
/etc/ovirt-hosted-engine/firewalld to /etc/firewalld/services
and execute the following commands:
firewall-cmd -service hosted-console
[ INFO ] Creating VM
You can now connect to the VM with the following command:
/usr/bin/remote-viewer vnc://localhost:5900
Use temporary password "2049ZfXr" to connect to vnc console.
Please note that in order to use remote-viewer you need to be
able to run graphical applications.
This means that if you are using ssh you have to supply the -Y
flag (enables trusted X11 forwarding).
Otherwise you can run the command from a terminal in your
preferred desktop environment.
If you cannot run graphical applications you can connect to the
graphic console from another host or connect to the console using the
following command:
virsh -c qemu+tls://Test/system console HostedEngine
If you need to reboot the VM you will need to start it manually
using the command:
hosted-engine --vm-start
You can then set a temporary password using the command:
hosted-engine --add-console-password
The VM has been started. Install the OS and shut down or reboot
it. To continue please make a selection:
(1) Continue setup - VM installation is complete
(2) Reboot the VM and restart installation
(3) Abort setup
(4) Destroy VM and abort setup