
Il 06/07/2015 04:35, Zhong Qiang ha scritto:
2015-07-02 19:53 GMT+08:00 Sandro Bonazzola <sbonazzo@redhat.com <mailto:sbonazzo@redhat.com>>:
Il 02/07/2015 12:56, Sandro Bonazzola ha scritto: > Il 02/07/2015 12:44, Zhong Qiang ha scritto: >> Hey Sandro, >> Thanks for your reply. >> >> [root@ovirthost01 ~]# locale >> LANG=en_US.utf8 >> LC_CTYPE="en_US.utf8" >> LC_NUMERIC="en_US.utf8" >> LC_TIME="en_US.utf8" >> LC_COLLATE="en_US.utf8" >> LC_MONETARY="en_US.utf8" >> LC_MESSAGES="en_US.utf8" >> LC_PAPER="en_US.utf8" >> LC_NAME="en_US.utf8" >> LC_ADDRESS="en_US.utf8" >> LC_TELEPHONE="en_US.utf8" >> LC_MEASUREMENT="en_US.utf8" >> LC_IDENTIFICATION="en_US.utf8" >> LC_ALL= >> > > tried to reproduce your issue on a clean non-node system and it works fine.
Issue has been found, patch pushed: https://gerrit.ovirt.org/43147
thanks,it works.but still get error:[ ERROR ] Failed to execute stage 'Misc configuration': Incoherence detected in OVF file: image size 10485760000 does not match declared size. My image is oVirt-Engine-Appliance-CentOS-x86_64-7-20150701.75.ova and oVirt Node Hypervisor release 3.5 (0.999.201507032312.el7.centos)
Fabian, can you respin the Appliance checking the ovf file matches?
> > Fabian, are you able to reproduce on node? > >> >> 2015-07-02 17:17 GMT+08:00 Sandro Bonazzola <sbonazzo@redhat.com <mailto:sbonazzo@redhat.com> <mailto:sbonazzo@redhat.com <mailto:sbonazzo@redhat.com>>>: >> >> Il 02/07/2015 10:59, Zhong Qiang ha scritto: >> > hey Sandro, >> > this is my log: >> > >> > 2015-07-02 15:51 GMT+08:00 Sandro Bonazzola <sbonazzo@redhat.com <mailto:sbonazzo@redhat.com> <mailto:sbonazzo@redhat.com <mailto:sbonazzo@redhat.com>> <mailto:sbonazzo@redhat.com <mailto:sbonazzo@redhat.com> >> <mailto:sbonazzo@redhat.com <mailto:sbonazzo@redhat.com>>>>: >> > >> > Il 02/07/2015 05:45, Zhong Qiang ha scritto: >> > > hey, >> > > I tried two case. >> > > ################## >> > > case 1: >> > > installed ovirt-node-iso-3.5-0.999.201506302311.el7.centos.iso or ovirt-node-iso-3.5-0.999.201507012312.el7.centos.iso , >> and setup >> > > hosted-engine . >> > > got error message below: >> > > @@@@@@@@@@@@@@@@@@@@@@@@@@@ >> > > [root@ovirthost01 Stor01]# hosted-engine --deploy >> > > [ INFO ] Stage: Initializing >> > > [ INFO ] Generating a temporary VNC password. >> > > [ INFO ] Stage: Environment setup >> > > Continuing will configure this host for serving as hypervisor and create a VM where you have to install oVirt Engine afterwards. >> > > Are you sure you want to continue? (Yes, No)[Yes]: >> > > Configuration files: [] >> > > Log file: /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20150702021002-pa9xwr.log >> > > Version: otopi-1.3.3_master (otopi-1.3.3-0.0.master.20150617163218.gitfc9ccb8.el7) >> > > [ INFO ] Hardware supports virtualization >> > > [ INFO ] Stage: Environment packages setup >> > > [ INFO ] Stage: Programs detection >> > > [ INFO ] Stage: Environment setup >> > > [ INFO ] Stage: Environment customization >> > > >> > > --== STORAGE CONFIGURATION ==-- >> > > >> > > During customization use CTRL-D to abort. >> > > Please specify the storage you would like to use (iscsi, nfs3, nfs4)[nfs3]: >> > > Please specify the full shared storage connection path to use (example: host:/path): 10.10.19.99:/volume1/nfsstor >> > > The specified storage location already contains a data domain. Is this an additional host setup (Yes, No)[Yes]? >> > > [ INFO ] Installing on additional host >> > > Please specify the Host ID [Must be integer, default: 2]: >> > > Please provide storage domain name. [hosted_storage]: hostedStor >> > > [ ERROR ] Failed to execute stage 'Environment customization': Storage domain name cannot be empty. It can only consist of alphanumeric >> characters >> > > (that is, letters, numbers, and signs "-" and "_"). All other characters are not valid in the name. >> > >> > Can you please provide /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20150702021002-pa9xwr.log? >> >> This is weird. >> the storage domain recorded is: >> OVEHOSTED_STORAGE/storageDomainName=str:'hostedStor' >> >> and the validation should fail only if it matches _RE_NOT_ALPHANUMERIC = re.compile(r"[^-\w]") >> >> so 'hostedStor' should have been considered valid. >> can you please provide 'locale' output? >> maybe it's a locale issue. >> >> >> > >> > >> > >> > > [ INFO ] Stage: Clean up >> > > [ INFO ] Generating answer file '/var/lib/ovirt-hosted-engine-setup/answers/answers-20150702021034.conf' >> > > [ INFO ] Stage: Pre-termination >> > > [ INFO ] Stage: Termination >> > > @@@@@@@@@@@@@@@@@@@@@@@@@@@@ >> > > >> > > ######################### >> > > case 2: >> > > installed ovirt-node-iso-3.5-0.999.201504280931.el7.centos.iso , and setup hosted-engine . >> > > got error message below: >> > > @@@@@@@@@@@@@@@@@@@@@@@@@@@@ >> > > [root@ovirthost01 ~]# hosted-engine --deploy >> > > [ INFO ] Stage: Initializing >> > > [ INFO ] Generating a temporary VNC password. >> > > [ INFO ] Stage: Environment setup >> > > Continuing will configure this host for serving as hypervisor and create a VM where you have to install oVirt Engine afterwards. >> > > Are you sure you want to continue? (Yes, No)[Yes]: >> > > Configuration files: [] >> > > Log file: /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20150702022914-83zr2r.log >> > > Version: otopi-1.3.1 (otopi-1.3.1-1.el7) >> > > [ INFO ] Hardware supports virtualization >> > > [ INFO ] Stage: Environment packages setup >> > > [ INFO ] Stage: Programs detection >> > > [ INFO ] Stage: Environment setup >> > > [ INFO ] Stage: Environment customization >> > > >> > > --== STORAGE CONFIGURATION ==-- >> > > >> > > During customization use CTRL-D to abort. >> > > Please specify the storage you would like to use (iscsi, nfs3, nfs4)[nfs3]: >> > > Please specify the full shared storage connection path to use (example: host:/path): 10.10.19.99:/volume1/nfsstor >> > > The specified storage location already contains a data domain. Is this an additional host setup (Yes, No)[Yes]? No >> > > [ INFO ] Installing on first host >> > > Local storage datacenter name is an internal name and currently will not be shown in engine's admin UI. >> > > Please enter local datacenter name [hosted_datacenter]: >> > > >> > > --== SYSTEM CONFIGURATION ==-- >> > > >> > > >> > > --== NETWORK CONFIGURATION ==-- >> > > >> > > Please indicate a nic to set ovirtmgmt bridge on: (p4p1) [p4p1]: >> > > iptables was detected on your computer, do you wish setup to configure it? (Yes, No)[Yes]: >> > > Please indicate a pingable gateway IP address [10.10.19.254]: >> > > >> > > --== VM CONFIGURATION ==-- >> > > >> > > Please specify the device to boot the VM from (cdrom, disk, pxe) [cdrom]: disk >> > > Please specify path to OVF archive you would like to use [None]: /data/Stor01/oVirt-Engine-Appliance-CentOS-x86_64-7-20150628.74.ova >> > > [ INFO ] Checking OVF archive content (could take a few minutes depending on archive size) >> > > [ INFO ] Checking OVF XML content (could take a few minutes depending on archive size) >> > > [WARNING] OVF does not contain a valid image description, using default. >> > > [ ERROR ] Not enough space in the temporary directory >> > > Please specify path to a temporary directory with at least 10 GB [/tmp]: /data/Stor01/tmp >> > > Please specify an alias for the Hosted Engine image [hosted_engine]: >> > > The following CPU types are supported by this host: >> > > - model_Nehalem: Intel Nehalem Family >> > > - model_Penryn: Intel Penryn Family >> > > - model_Conroe: Intel Conroe Family >> > > Please specify the CPU type to be used by the VM [model_Nehalem]: >> > > [WARNING] Minimum requirements for disk size not met >> > > You may specify a unicast MAC address for the VM or accept a randomly generated default [00:16:3e:4c:58:c1]: >> > > Please specify the console type you would like to use to connect to the VM (vnc, spice) [vnc]: >> > > >> > > --== HOSTED ENGINE CONFIGURATION ==-- >> > > >> > > Enter the name which will be used to identify this host inside the Administrator Portal [hosted_engine_1]: >> > > Enter 'admin@internal' user password that will be used for accessing the Administrator Portal: >> > > Confirm 'admin@internal' user password: >> > > Please provide the FQDN for the engine you would like to use. >> > > This needs to match the FQDN that you will use for the engine installation within the VM. >> > > Note: This will be the FQDN of the VM you are now going to create, >> > > it should not point to the base host or to any other existing machine. >> > > Engine FQDN: ovirtmgmt.ctcnet.com <http://ovirtmgmt.ctcnet.com> <http://ovirtmgmt.ctcnet.com> <http://ovirtmgmt.ctcnet.com> <http://ovirtmgmt.ctcnet.com> >> > > Please provide the name of the SMTP server through which we will send notifications [localhost]: >> > > Please provide the TCP port number of the SMTP server [25]: >> > > Please provide the email address from which notifications will be sent [root@localhost]: >> > > Please provide a comma-separated list of email addresses which will get notifications [root@localhost]: >> > > [ INFO ] Stage: Setup validation >> > > [WARNING] Cannot validate host name settings, reason: resolved host does not match any of the local addresses >> > > [WARNING] Failed to resolve ovirthost01.ctcnet.com <http://ovirthost01.ctcnet.com> <http://ovirthost01.ctcnet.com> <http://ovirthost01.ctcnet.com> >> <http://ovirthost01.ctcnet.com> using DNS, it can be resolved >> > only locally >> > > >> > > --== CONFIGURATION PREVIEW ==-- >> > > >> > > Bridge interface : p4p1 >> > > Engine FQDN : ovirtmgmt.ctcnet.com <http://ovirtmgmt.ctcnet.com> <http://ovirtmgmt.ctcnet.com> <http://ovirtmgmt.ctcnet.com> >> <http://ovirtmgmt.ctcnet.com> >> > > Bridge name : ovirtmgmt >> > > SSH daemon port : 22 >> > > Firewall manager : iptables >> > > Gateway address : 10.10.19.254 >> > > Host name for web application : hosted_engine_1 >> > > Host ID : 1 >> > > Image alias : hosted_engine >> > > Image size GB : 10 >> > > Storage connection : 10.10.19.99:/volume1/nfsstor >> > > Console type : vnc >> > > Memory size MB : 16384 >> > > MAC address : 00:16:3e:4c:58:c1 >> > > Boot type : disk >> > > Number of CPUs : 4 >> > > OVF archive (for disk boot) : /data/Stor01/oVirt-Engine-Appliance-CentOS-x86_64-7-20150628.74.ova >> > > CPU Type : model_Nehalem >> > > >> > > Please confirm installation settings (Yes, No)[Yes]: >> > > [ INFO ] Stage: Transaction setup >> > > [ INFO ] Stage: Misc configuration >> > > [ INFO ] Stage: Package installation >> > > [ INFO ] Stage: Misc configuration >> > > [ INFO ] Configuring libvirt >> > > [ INFO ] Configuring VDSM >> > > [ INFO ] Starting vdsmd >> > > [ INFO ] Waiting for VDSM hardware info >> > > [ INFO ] Configuring the management bridge >> > > [ INFO ] Connected to Storage Domain >> > > [ INFO ] Connecting Storage Pool >> > > [ INFO ] Verifying sanlock lockspace initialization >> > > [ INFO ] Creating VM Image >> > > [ INFO ] Extracting disk image from OVF archive (could take a few minutes depending on archive size) >> > > [ INFO ] Validating pre-allocated volume size >> > > [ INFO ] Image not uploaded to data domain >> > > [ ERROR ] Failed to execute stage 'Misc configuration': Incoherence detected in OVF file: image size 10485760000 does not match declared size >> > 10737418240 >> > >> > Fabian looks like OVF xml is not matching OVA content, can you take a look? >> > >> > I checked this OVF xml,size is 10485760000 ,and modified the size to 10737418240, and recompress files to xxx.ova.but >> > still got this error! >> > >> > > [ INFO ] Stage: Clean up >> > > [ INFO ] Generating answer file '/var/lib/ovirt-hosted-engine-setup/answers/answers-20150702023715.conf' >> > > [ INFO ] Stage: Pre-termination >> > > [ INFO ] Stage: Termination >> > > >> > > @@@@@@@@@@@@@@@@@@@@@@@@@@@@ >> > > >> > > 2015-07-01 18:42 GMT+08:00 Fabian Deutsch <fdeutsch@redhat.com <mailto:fdeutsch@redhat.com> <mailto:fdeutsch@redhat.com <mailto:fdeutsch@redhat.com>> <mailto:fdeutsch@redhat.com <mailto:fdeutsch@redhat.com> >> <mailto:fdeutsch@redhat.com <mailto:fdeutsch@redhat.com>>> <mailto:fdeutsch@redhat.com <mailto:fdeutsch@redhat.com> <mailto:fdeutsch@redhat.com <mailto:fdeutsch@redhat.com>> >> > <mailto:fdeutsch@redhat.com <mailto:fdeutsch@redhat.com> <mailto:fdeutsch@redhat.com <mailto:fdeutsch@redhat.com>>>>>: >> > > >> > > ----- Original Message ----- >> > > > Hey, >> > > > I can't update ovirt node,get this message: >> > > >> > > From what to what Node version did you want to upgrade? >> > > >> > > Upgrades from el6 to el7 are not supported. >> > > >> > > - fabian >> > > >> > > > [root@ovirthost1 Stor01]# ovirt-node-upgrade >> > > > --iso=/data/Stor01/ISOs/ovirt-node-iso-3.5-0.999.201506302311.el7.centos.iso >> > > > --reboot=1 >> > > > ovirt-node-upgrade.UpgradeTool: INFO Temporary Directory is: >> > > > /data/tmpfZC2lU >> > > > ovirt-node-upgrade.LockFile: INFO Acquiring Lock >> > > > ovirt-node-upgrade.UpgradeTool: ERROR Error: Upgrade Failed: Command >> > > > Failed: '('mount', '-o', 'loop', '/live/LiveOS/squashfs.img', >> > > > '/data/tmpfZC2lU/squashfs')' [] >> > > > Traceback (most recent call last): >> > > > File "/usr/sbin/ovirt-node-upgrade", line 362, in run >> > > > self._extract_rootfs(self._options.iso_file) >> > > > File "/usr/sbin/ovirt-node-upgrade", line 206, in _extract_rootfs >> > > > squashfs_dir) >> > > > File "/usr/sbin/ovirt-node-upgrade", line 145, in _system >> > > > raise RuntimeError("Command Failed: '%s' %s" % (command, output)) >> > > > RuntimeError: Command Failed: '('mount', '-o', 'loop', >> > > > '/live/LiveOS/squashfs.img', '/data/tmpfZC2lU/squashfs')' [] >> > > > ovirt-node-upgrade.UpgradeTool: INFO Running rollback hooks >> > > > ovirt-node-upgrade.UpgradeTool: INFO rollback hooks completed >> > > > ovirt-node-upgrade.UpgradeTool: INFO Warning: >> > > > /data/tmpfZC2lU/rootfs/usr/libexec/ovirt-node/hooks/rollback does not exist >> > > > ovirt-node-upgrade.UpgradeTool: INFO Upgrade Failed, Rollback Completed >> > > > ovirt-node-upgrade.UpgradeTool: INFO Cleaning up temporary directory >> > > > ovirt-node-upgrade.UpgradeTool: WARNING Cleanup Failed >> > > > >> > > > >> > > > thanks >> > > > >> > > > --qiang >> > > > >> > > > 2015-07-01 15:20 GMT+08:00 Fabian Deutsch <fdeutsch@redhat.com <mailto:fdeutsch@redhat.com> <mailto:fdeutsch@redhat.com <mailto:fdeutsch@redhat.com>> <mailto:fdeutsch@redhat.com <mailto:fdeutsch@redhat.com> >> <mailto:fdeutsch@redhat.com <mailto:fdeutsch@redhat.com>>> <mailto:fdeutsch@redhat.com <mailto:fdeutsch@redhat.com> <mailto:fdeutsch@redhat.com <mailto:fdeutsch@redhat.com>> >> > <mailto:fdeutsch@redhat.com <mailto:fdeutsch@redhat.com> <mailto:fdeutsch@redhat.com <mailto:fdeutsch@redhat.com>>>>>: >> > > > >> > > > > >> > > > > >> > > > > ----- Original Message ----- >> > > > > > hi fabian: >> > > > > > I got some error message below.How can i fix this? >> > > > > > >> > > > > >> > > > > Hey >> > > > > >> > > > > > [ ERROR ] Not enough space in the temporary directory >> > > > > > Please specify path to a temporary directory with at least 10 >> > > > > GB >> > > > > >> > > > > You need more space on /tmp - At best you should have 50GB available on / >> > > > > >> > > > > > [WARNING] Minimum requirements for disk size not met >> > > > > >> > > > > The same as above >> > > > > >> > > > > > Engine FQDN: ovirtmgmt.ctcnet.com <http://ovirtmgmt.ctcnet.com> <http://ovirtmgmt.ctcnet.com> <http://ovirtmgmt.ctcnet.com> >> <http://ovirtmgmt.ctcnet.com> >> > > > > > [WARNING] Failed to resolve ovirtmgmt.ctcnet.com <http://ovirtmgmt.ctcnet.com> <http://ovirtmgmt.ctcnet.com> <http://ovirtmgmt.ctcnet.com> >> <http://ovirtmgmt.ctcnet.com> using DNS, it can be >> > > > > > resolved only locally >> > > > > >> > > > > The FQDN you use should be resolvable in your network, and it seems as if >> > > > > this >> > > > > is not the case. >> > > > > >> > > > > > [ INFO ] Stage: Setup validation >> > > > > > [WARNING] Cannot validate host name settings, reason: resolved host does >> > > > > > not match any of the local addresses >> > > > > > [WARNING] Failed to resolve ovirthost1.ctcnet.com <http://ovirthost1.ctcnet.com> <http://ovirthost1.ctcnet.com> <http://ovirthost1.ctcnet.com> >> <http://ovirthost1.ctcnet.com> using DNS, it can be >> > > > > > resolved only locally >> > > > > >> > > > > Same as the previous one. >> > > > > >> > > > > > [ ERROR ] Failed to execute stage 'Misc configuration': Incoherence >> > > > > > detected in OVF file: image size 10485760000 does not match declared size >> > > > > > 10737418240 >> > > > > >> > > > > Mh. This is a quite old bug. >> > > > > Could yo uretry with a more recent iso from: >> > > > > http://jenkins.ovirt.org/job/ovirt-node_ovirt-3.5_create-iso-el7_merged/ >> > > > > >> > > > > >> > > > > Greetings >> > > > > fabian >> > > > > >> > > > >> > > > _______________________________________________ >> > > > Users mailing list >> > > > Users@ovirt.org <mailto:Users@ovirt.org> <mailto:Users@ovirt.org <mailto:Users@ovirt.org>> <mailto:Users@ovirt.org <mailto:Users@ovirt.org> <mailto:Users@ovirt.org <mailto:Users@ovirt.org>>> <mailto:Users@ovirt.org <mailto:Users@ovirt.org> >> <mailto:Users@ovirt.org <mailto:Users@ovirt.org>> <mailto:Users@ovirt.org <mailto:Users@ovirt.org> <mailto:Users@ovirt.org <mailto:Users@ovirt.org>>>> >> > > > http://lists.ovirt.org/mailman/listinfo/users >> > > > >> > > >> > > >> > > >> > > >> > > _______________________________________________ >> > > Users mailing list >> > > Users@ovirt.org <mailto:Users@ovirt.org> <mailto:Users@ovirt.org <mailto:Users@ovirt.org>> <mailto:Users@ovirt.org <mailto:Users@ovirt.org> <mailto:Users@ovirt.org <mailto:Users@ovirt.org>>> >> > > http://lists.ovirt.org/mailman/listinfo/users >> > > >> > >> > >> > -- >> > Sandro Bonazzola >> > Better technology. Faster innovation. Powered by community collaboration. >> > See how it works at redhat.com <http://redhat.com> <http://redhat.com> <http://redhat.com> >> > >> > >> >> >> -- >> Sandro Bonazzola >> Better technology. Faster innovation. Powered by community collaboration. >> See how it works at redhat.com <http://redhat.com> <http://redhat.com> >> >> > >
-- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com <http://redhat.com>
-- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com