Hi Kasturi,

Thanks for the help...it's ok...that means first i need to change the host with FQDN....but still the same question :-

1. Suppose i will add the host with FQDN and the FQDN has public ip address(202.151.100.X)... (When ovirt add the host...it will create ovirtmgmt network by default on the basis of this network connection)

2. And my storage network work on private network (10.10.10.0)..

3. If i add the Host with FQDN...seems still the gluster traffic route through ovirtmgmt network interface ??

4. Or do i need to follow this for the modifications (http://www.ovirt.org/oVirt_Wiki:How_to_change_Gluster%27s_network_interface)

5. What about if i add new host later on ??

Thanks,

Punit D

On Wed, Aug 6, 2014 at 5:10 PM, knarra <knarra@redhat.com> wrote:

On 08/06/2014 06:36 AM, Punit Dambiwal wrote:

Hi Sahina,

But Ovirt panel doesn't allow me to add with FQDN...it just display the ip address of the hosts...

Hi Punit,

    The above happens only when ip address of the host is given in the Address field of New host dialog box, i.e while adding hosts to ovirt.

As sahina suggested, if you would have provided the FQDN in the address filed while adding hosts to ovirt, you should have seen FQDN's of the hosts being displayed in the Host field of 'Add Bricks' Dialog.

    In case you would have not provided FQDN of the host in the address filed while adding hosts, please remove the hosts and add it again by giving FQDN of the host in the address field in the New Host dialog box.

    Hope this helps :-)

Thanks
kasturi.
On Tue, Aug 5, 2014 at 7:48 PM, Sahina Bose <sabose@redhat.com> wrote:

On 08/04/2014 09:06 AM, Punit Dambiwal wrote:

Hi Sahina,

But when i try to add the gluster Hosts from Ovirt....it doesn't display the FQDN to add the bricks...it display the ip address only...i will try to use the work around....

When you add the gluster host to oVirt, you should have provided the FQDN in the host address field. It uses this to display the list of hosts from which you can add the bricks

Another question is what will be the drawbacks if i use ovirtmgmt and storage on the same network (i will use 10GB network here with bonding) ??

On Fri, Aug 1, 2014 at 6:14 PM, Sahina Bose <sabose@redhat.com> wrote:

On 08/01/2014 02:51 PM, Dan Kenigsberg wrote:

On Fri, Aug 01, 2014 at 09:43:07AM +0800, Punit Dambiwal wrote:

Hi All,

Is there any update on this ??

On Thu, Jul 31, 2014 at 9:08 AM, Punit Dambiwal <hypunit@gmail.com> wrote:

Hi Antoni,

But all the bricks and gluster in the another subnet...I am using the
Compute and gluster storage combined on the same host....

Ovirtmgmt :- 43.25.76.0/24
Gluster Storage :- 10.10.10.0/24

Did you try to follow Sahina's advice?

qemu-to-gluster communication goes on top the IP that you mount.
However, without hacks, inter-gluster communication uses FQDN of hosts,
which most commonly resolves to the management network.

From the output of your "gluster volume info" , it looks like you have used IP address (43.25...) to peer probe the hosts? If you add the host from oVirt, for gluster to be able to use separate network for glusterd-glusterd communication, you will need to use FQDN while adding the host, and workaround as mentioned in http://lists.ovirt.org/pipermail/users/2014-February/020894.html
_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users