
The agent..log was sent minutes ago in another message. Here's the gluster client log for the engine volume: [2018-05-30 06:31:12.343709] I [MSGID: 108026] [afr-self-heal-metadata.c:52:__afr_selfheal_metadata_do] 0-engine-replicate-0: performing metadata selfheal on 3a430e50-48cb-463c-8657-aab5458ac155 [2018-05-30 06:31:12.348210] W [MSGID: 108015] [afr-self-heal-entry.c:56:afr_selfheal_entry_delete] 0-engine-replicate-0: expunging file 117c5234-e6d6-4f03-809b-a4ef6a6fac4d/hosted-engine.metadata (38a277cd-113d-4ca8-8f48-fadc944d3272) on engine-client-1 [2018-05-30 06:31:12.360602] I [MSGID: 108026] [afr-self-heal-common.c:1656:afr_log_selfheal] 0-engine-replicate-0: Completed metadata selfheal on 3a430e50-48cb-463c-8657-aab5458ac155. sources=[0] 2 sinks=1 [2018-05-30 06:31:12.379169] I [MSGID: 108026] [afr-self-heal-common.c:1656:afr_log_selfheal] 0-engine-replicate-0: Completed entry selfheal on 117c5234-e6d6-4f03-809b-a4ef6a6fac4d. sources=[0] 2 sinks=1 [2018-05-30 06:32:54.756729] I [MSGID: 108026] [afr-self-heal-metadata.c:52:__afr_selfheal_metadata_do] 0-engine-replicate-0: performing metadata selfheal on 2ecf0f33-1385-416e-8619-129bdb62b61f [2018-05-30 06:32:54.763175] I [MSGID: 108026] [afr-self-heal-common.c:1656:afr_log_selfheal] 0-engine-replicate-0: Completed metadata selfheal on 2ecf0f33-1385-416e-8619-129bdb62b61f. sources=[0] 2 sinks=1 [2018-05-30 06:37:06.581538] I [MSGID: 108026] [afr-self-heal-common.c:1656:afr_log_selfheal] 0-engine-replicate-0: Completed data selfheal on 06c557a9-b550-4e25-b190-804e50cea65b. sources=[0] 2 sinks=1 [2018-05-30 06:39:55.739302] I [MSGID: 108026] [afr-self-heal-common.c:1656:afr_log_selfheal] 0-engine-replicate-0: Completed data selfheal on 2ecf0f33-1385-416e-8619-129bdb62b61f. sources=[0] 2 sinks=1 [2018-05-30 06:44:04.911825] I [MSGID: 108026] [afr-self-heal-common.c:1656:afr_log_selfheal] 0-engine-replicate-0: Completed data selfheal on 2ecf0f33-1385-416e-8619-129bdb62b61f. sources=[0] 2 sinks=1 [2018-05-30 06:58:05.123854] I [MSGID: 108026] [afr-self-heal-metadata.c:52:__afr_selfheal_metadata_do] 0-engine-replicate-0: performing metadata selfheal on 03ca7a59-e8ee-4a70-bc68-47e972aeb801 [2018-05-30 06:58:05.131929] I [MSGID: 108026] [afr-self-heal-common.c:1656:afr_log_selfheal] 0-engine-replicate-0: Completed metadata selfheal on 03ca7a59-e8ee-4a70-bc68-47e972aeb801. sources=[0] 2 sinks=1 [2018-05-30 07:01:42.583991] I [MSGID: 108026] [afr-self-heal-common.c:1656:afr_log_selfheal] 0-engine-replicate-0: Completed data selfheal on 2ecf0f33-1385-416e-8619-129bdb62b61f. sources=[0] 2 sinks=1 [2018-05-30 07:05:48.777982] I [MSGID: 108026] [afr-self-heal-common.c:1656:afr_log_selfheal] 0-engine-replicate-0: Completed data selfheal on 2ecf0f33-1385-416e-8619-129bdb62b61f. sources=[0] 2 sinks=1 -------- broker log: -------- Thread-1::INFO::2018-05-30 00:07:13,241::ping::60::ping.Ping::(action) Successfully pinged 192.168.8.1 Listener::INFO::2018-05-30 00:07:14,344::storage_broker::304::ovirt_hosted_engine_ha.broker.storage_broker.StorageBroker::(_get_domain_monitor_status) VDSM domain monitor status: PENDING Listener::INFO::2018-05-30 00:07:19,356::storage_broker::304::ovirt_hosted_engine_ha.broker.storage_broker.StorageBroker::(_get_domain_monitor_status) VDSM domain monitor status: PENDING Thread-5::INFO::2018-05-30 00:07:22,081::engine_health::202::engine_health.EngineHealth::(_result_from_stats) VM not running on this host, status Down Listener::INFO::2018-05-30 00:07:24,369::storage_broker::304::ovirt_hosted_engine_ha.broker.storage_broker.StorageBroker::(_get_domain_monitor_status) VDSM domain monitor status: PENDING Listener::INFO::2018-05-30 00:07:29,382::storage_broker::304::ovirt_hosted_engine_ha.broker.storage_broker.StorageBroker::(_get_domain_monitor_status) VDSM domain monitor status: PENDING Listener::INFO::2018-05-30 00:07:34,393::storage_broker::304::ovirt_hosted_engine_ha.broker.storage_broker.StorageBroker::(_get_domain_monitor_status) VDSM domain monitor status: PENDING Listener::INFO::2018-05-30 00:07:39,406::storage_broker::304::ovirt_hosted_engine_ha.broker.storage_broker.StorageBroker::(_get_domain_monitor_status) VDSM domain monitor status: PENDING Listener::INFO::2018-05-30 00:07:44,419::storage_broker::304::ovirt_hosted_engine_ha.broker.storage_broker.StorageBroker::(_get_domain_monitor_status) VDSM domain monitor status: PENDING Listener::INFO::2018-05-30 00:07:49,431::storage_broker::304::ovirt_hosted_engine_ha.broker.storage_broker.StorageBroker::(_get_domain_monitor_status) VDSM domain monitor status: PENDING Listener::INFO::2018-05-30 00:07:54,444::storage_broker::304::ovirt_hosted_engine_ha.broker.storage_broker.StorageBroker::(_get_domain_monitor_status) VDSM domain monitor status: PENDING Listener::INFO::2018-05-30 00:07:59,452::storage_broker::304::ovirt_hosted_engine_ha.broker.storage_broker.StorageBroker::(_get_domain_monitor_status) VDSM domain monitor status: PENDING Thread-2::INFO::2018-05-30 00:08:03,736::mgmt_bridge::62::mgmt_bridge.MgmtBridge::(action) Found bridge ovirtmgmt with ports Listener::INFO::2018-05-30 00:08:04,460::storage_broker::304::ovirt_hosted_engine_ha.broker.storage_broker.StorageBroker::(_get_domain_monitor_status) VDSM domain monitor status: PENDING Listener::INFO::2018-05-30 00:08:09,468::storage_broker::304::ovirt_hosted_engine_ha.broker.storage_broker.StorageBroker::(_get_domain_monitor_status) VDSM domain monitor status: PENDING Thread-4::INFO::2018-05-30 00:08:11,461::cpu_load_no_engine::116::cpu_load_no_engine.CpuLoadNoEngine::(calculate_load) VM stats do not contain cpu usage. VM might be down. Thread-4::INFO::2018-05-30 00:08:11,461::cpu_load_no_engine::126::cpu_load_no_engine.CpuLoadNoEngine::(calculate_load) System load total=0.0169, engine=0.0000, non-engine=0.0169 Listener::INFO::2018-05-30 00:08:14,481::storage_broker::304::ovirt_hosted_engine_ha.broker.storage_broker.StorageBroker::(_get_domain_monitor_status) VDSM domain monitor status: PENDING Listener::INFO::2018-05-30 00:08:19,490::storage_broker::304::ovirt_hosted_engine_ha.broker.storage_broker.StorageBroker::(_get_domain_monitor_status) VDSM domain monitor status: PENDING Thread-5::INFO::2018-05-30 00:08:22,175::engine_health::202::engine_health.EngineHealth::(_result_from_stats) VM not running on this host, status Down Thread-1::INFO::2018-05-30 00:08:22,436::ping::60::ping.Ping::(action) Successfully pinged 192.168.8.1 Listener::INFO::2018-05-30 00:08:24,503::storage_broker::304::ovirt_hosted_engine_ha.broker.storage_broker.StorageBroker::(_get_domain_monitor_status) VDSM domain monitor status: PENDING On Wed, May 30, 2018 at 12:03 AM, Sahina Bose <sabose@redhat.com> wrote:
[Adding gluster-users back]
Nothing amiss with volume info and status. Can you check the agent.log and broker.log - will be under /var/log/ovirt-hosted-engine-ha/
Also the gluster client logs - under /var/log/glusterfs/rhev-data- center-mnt-glusterSD<volume>.log
On Wed, May 30, 2018 at 12:08 PM, Jim Kusznir <jim@palousetech.com> wrote:
I believe the gluster data store for the engine is up and working correctly. The rest are not mounted, as the engine hasn't managed to start correctly yet. I did perform the copy-a-junk-file into the data store, then check to ensure its there on another host, then delete that and see that it disappeared on the first host; it passed that test. Here's the info and status. (I have NOT performed the steps that Krutika and Ravishankar suggested yet, as I don't have my data volumes working again yet.
[root@ovirt2 images]# gluster volume info
Volume Name: data Type: Replicate Volume ID: e670c488-ac16-4dd1-8bd3-e43b2e42cc59 Status: Started Snapshot Count: 0 Number of Bricks: 1 x (2 + 1) = 3 Transport-type: tcp Bricks: Brick1: ovirt1.nwfiber.com:/gluster/brick2/data Brick2: ovirt2.nwfiber.com:/gluster/brick2/data Brick3: ovirt3.nwfiber.com:/gluster/brick2/data (arbiter) Options Reconfigured: diagnostics.count-fop-hits: on diagnostics.latency-measurement: on changelog.changelog: on geo-replication.ignore-pid-check: on geo-replication.indexing: on server.allow-insecure: on performance.readdir-ahead: on performance.quick-read: off performance.read-ahead: off performance.io-cache: off performance.stat-prefetch: off cluster.eager-lock: enable network.remote-dio: enable cluster.quorum-type: auto cluster.server-quorum-type: server storage.owner-uid: 36 storage.owner-gid: 36 features.shard: on features.shard-block-size: 512MB performance.low-prio-threads: 32 cluster.data-self-heal-algorithm: full cluster.locking-scheme: granular cluster.shd-wait-qlength: 10000 cluster.shd-max-threads: 8 network.ping-timeout: 30 user.cifs: off nfs.disable: on performance.strict-o-direct: on
Volume Name: data-hdd Type: Replicate Volume ID: d342a3ab-16f3-49f0-bbcf-f788be8ac5f1 Status: Started Snapshot Count: 0 Number of Bricks: 1 x 3 = 3 Transport-type: tcp Bricks: Brick1: 172.172.1.11:/gluster/brick3/data-hdd Brick2: 172.172.1.12:/gluster/brick3/data-hdd Brick3: 172.172.1.13:/gluster/brick3/data-hdd Options Reconfigured: diagnostics.count-fop-hits: on diagnostics.latency-measurement: on network.ping-timeout: 30 server.allow-insecure: on storage.owner-gid: 36 storage.owner-uid: 36 user.cifs: off features.shard: on cluster.shd-wait-qlength: 10000 cluster.shd-max-threads: 8 cluster.locking-scheme: granular cluster.data-self-heal-algorithm: full cluster.server-quorum-type: server cluster.quorum-type: auto cluster.eager-lock: enable network.remote-dio: enable performance.low-prio-threads: 32 performance.stat-prefetch: off performance.io-cache: off performance.read-ahead: off performance.quick-read: off changelog.changelog: on geo-replication.ignore-pid-check: on geo-replication.indexing: on transport.address-family: inet performance.readdir-ahead: on
Volume Name: engine Type: Replicate Volume ID: 87ad86b9-d88b-457e-ba21-5d3173c612de Status: Started Snapshot Count: 0 Number of Bricks: 1 x (2 + 1) = 3 Transport-type: tcp Bricks: Brick1: ovirt1.nwfiber.com:/gluster/brick1/engine Brick2: ovirt2.nwfiber.com:/gluster/brick1/engine Brick3: ovirt3.nwfiber.com:/gluster/brick1/engine (arbiter) Options Reconfigured: changelog.changelog: on geo-replication.ignore-pid-check: on geo-replication.indexing: on performance.readdir-ahead: on performance.quick-read: off performance.read-ahead: off performance.io-cache: off performance.stat-prefetch: off cluster.eager-lock: enable network.remote-dio: off cluster.quorum-type: auto cluster.server-quorum-type: server storage.owner-uid: 36 storage.owner-gid: 36 features.shard: on features.shard-block-size: 512MB performance.low-prio-threads: 32 cluster.data-self-heal-algorithm: full cluster.locking-scheme: granular cluster.shd-wait-qlength: 10000 cluster.shd-max-threads: 6 network.ping-timeout: 30 user.cifs: off nfs.disable: on performance.strict-o-direct: on
Volume Name: iso Type: Replicate Volume ID: b1ba15f5-0f0f-4411-89d0-595179f02b92 Status: Started Snapshot Count: 0 Number of Bricks: 1 x (2 + 1) = 3 Transport-type: tcp Bricks: Brick1: ovirt1.nwfiber.com:/gluster/brick4/iso Brick2: ovirt2.nwfiber.com:/gluster/brick4/iso Brick3: ovirt3.nwfiber.com:/gluster/brick4/iso (arbiter) Options Reconfigured: performance.strict-o-direct: on nfs.disable: on user.cifs: off network.ping-timeout: 30 cluster.shd-max-threads: 6 cluster.shd-wait-qlength: 10000 cluster.locking-scheme: granular cluster.data-self-heal-algorithm: full performance.low-prio-threads: 32 features.shard-block-size: 512MB features.shard: on storage.owner-gid: 36 storage.owner-uid: 36 cluster.server-quorum-type: server cluster.quorum-type: auto network.remote-dio: off cluster.eager-lock: enable performance.stat-prefetch: off performance.io-cache: off performance.read-ahead: off performance.quick-read: off performance.readdir-ahead: on
[root@ovirt2 images]# gluster volume status Status of volume: data Gluster process TCP Port RDMA Port Online Pid ------------------------------------------------------------ ------------------ Brick ovirt1.nwfiber.com:/gluster/brick2/da ta 49152 0 Y 3226 Brick ovirt2.nwfiber.com:/gluster/brick2/da ta 49152 0 Y 2967 Brick ovirt3.nwfiber.com:/gluster/brick2/da ta 49152 0 Y 2554 Self-heal Daemon on localhost N/A N/A Y 4818 Self-heal Daemon on ovirt3.nwfiber.com N/A N/A Y 17853 Self-heal Daemon on ovirt1.nwfiber.com N/A N/A Y 4771
Task Status of Volume data ------------------------------------------------------------ ------------------ There are no active volume tasks
Status of volume: data-hdd Gluster process TCP Port RDMA Port Online Pid ------------------------------------------------------------ ------------------ Brick 172.172.1.11:/gluster/brick3/data-hdd 49153 0 Y 3232 Brick 172.172.1.12:/gluster/brick3/data-hdd 49153 0 Y 2976 Brick 172.172.1.13:/gluster/brick3/data-hdd N/A N/A N N/A NFS Server on localhost N/A N/A N N/A Self-heal Daemon on localhost N/A N/A Y 4818 NFS Server on ovirt3.nwfiber.com N/A N/A N N/A Self-heal Daemon on ovirt3.nwfiber.com N/A N/A Y 17853 NFS Server on ovirt1.nwfiber.com N/A N/A N N/A Self-heal Daemon on ovirt1.nwfiber.com N/A N/A Y 4771
Task Status of Volume data-hdd ------------------------------------------------------------ ------------------ There are no active volume tasks
Status of volume: engine Gluster process TCP Port RDMA Port Online Pid ------------------------------------------------------------ ------------------ Brick ovirt1.nwfiber.com:/gluster/brick1/en gine 49154 0 Y 3239 Brick ovirt2.nwfiber.com:/gluster/brick1/en gine 49154 0 Y 2982 Brick ovirt3.nwfiber.com:/gluster/brick1/en gine 49154 0 Y 2578 Self-heal Daemon on localhost N/A N/A Y 4818 Self-heal Daemon on ovirt3.nwfiber.com N/A N/A Y 17853 Self-heal Daemon on ovirt1.nwfiber.com N/A N/A Y 4771
Task Status of Volume engine ------------------------------------------------------------ ------------------ There are no active volume tasks
Status of volume: iso Gluster process TCP Port RDMA Port Online Pid ------------------------------------------------------------ ------------------ Brick ovirt1.nwfiber.com:/gluster/brick4/is o 49155 0 Y 3247 Brick ovirt2.nwfiber.com:/gluster/brick4/is o 49155 0 Y 2990 Brick ovirt3.nwfiber.com:/gluster/brick4/is o 49155 0 Y 2580 Self-heal Daemon on localhost N/A N/A Y 4818 Self-heal Daemon on ovirt3.nwfiber.com N/A N/A Y 17853 Self-heal Daemon on ovirt1.nwfiber.com N/A N/A Y 4771
Task Status of Volume iso ------------------------------------------------------------ ------------------ There are no active volume tasks
On Tue, May 29, 2018 at 11:30 PM, Sahina Bose <sabose@redhat.com> wrote:
On Wed, May 30, 2018 at 10:42 AM, Jim Kusznir <jim@palousetech.com> wrote:
hosted-engine --deploy failed (would not come up on my existing gluster storage). However, I realized no changes were written to my existing storage. So, I went back to trying to get my old engine running.
hosted-engine --vm-status is now taking a very long time (5+minutes) to return, and it returns stail information everywhere. I thought perhaps the lockspace is corrupt, so tried to clean that and metadata, but both are failing (--cleam-metadata has hung and I can't even ctrl-c out of it).
How can I reinitialize all the lockspace/metadata safely? There is no engine or VMs running currently....
I think the first thing to make sure is that your storage is up and running. So can you mount the gluster volumes and able to access the contents there? Please provide the gluster volume info and gluster volume status of the volumes that you're using.
--Jim
On Tue, May 29, 2018 at 9:33 PM, Jim Kusznir <jim@palousetech.com> wrote:
Well, things went from bad to very, very bad....
It appears that during one of the 2 minute lockups, the fencing agents decided that another node in the cluster was down. As a result, 2 of the 3 nodes were simultaneously reset with fencing agent reboot. After the nodes came back up, the engine would not start. All running VMs (including VMs on the 3rd node that was not rebooted) crashed.
I've now been working for about 3 hours trying to get the engine to come up. I don't know why it won't start. hosted-engine --vm-start says its starting, but it doesn't start (virsh doesn't show any VMs running). I'm currently running --deploy, as I had run out of options for anything else I can come up with. I hope this will allow me to re-import all my existing VMs and allow me to start them back up after everything comes back up.
I do have an unverified geo-rep backup; I don't know if it is a good backup (there were several prior messages to this list, but I didn't get replies to my questions. It was running in what I believe to be "strange", and the data directories are larger than their source).
I'll see if my --deploy works, and if not, I'll be back with another message/help request.
When the dust settles and I'm at least minimally functional again, I really want to understand why all these technologies designed to offer redundancy conspired to reduce uptime and create failures where there weren't any otherwise. I thought with hosted engine, 3 ovirt servers and glusterfs with minimum replica 2+arb or replica 3 should have offered strong resilience against server failure or disk failure, and should have prevented / recovered from data corruption. Instead, all of the above happened (once I get my cluster back up, I still have to try and recover my webserver VM, which won't boot due to XFS corrupt journal issues created during the gluster crashes). I think a lot of these issues were rooted from the upgrade from 4.1 to 4.2.
--Jim
On Tue, May 29, 2018 at 6:25 PM, Jim Kusznir <jim@palousetech.com> wrote:
I also finally found the following in my system log on one server:
[10679.524491] INFO: task glusterclogro:14933 blocked for more than 120 seconds. [10679.525826] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [10679.527144] glusterclogro D ffff97209832bf40 0 14933 1 0x00000080 [10679.527150] Call Trace: [10679.527161] [<ffffffffb9913f79>] schedule+0x29/0x70 [10679.527218] [<ffffffffc060e388>] _xfs_log_force_lsn+0x2e8/0x340 [xfs] [10679.527225] [<ffffffffb92cf1b0>] ? wake_up_state+0x20/0x20 [10679.527254] [<ffffffffc05eeb97>] xfs_file_fsync+0x107/0x1e0 [xfs] [10679.527260] [<ffffffffb944f0e7>] do_fsync+0x67/0xb0 [10679.527268] [<ffffffffb992076f>] ? system_call_after_swapgs+0xbc/ 0x160 [10679.527271] [<ffffffffb944f3d0>] SyS_fsync+0x10/0x20 [10679.527275] [<ffffffffb992082f>] system_call_fastpath+0x1c/0x21 [10679.527279] [<ffffffffb992077b>] ? system_call_after_swapgs+0xc8/ 0x160 [10679.527283] INFO: task glusterposixfsy:14941 blocked for more than 120 seconds. [10679.528608] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [10679.529956] glusterposixfsy D ffff972495f84f10 0 14941 1 0x00000080 [10679.529961] Call Trace: [10679.529966] [<ffffffffb9913f79>] schedule+0x29/0x70 [10679.530003] [<ffffffffc060e388>] _xfs_log_force_lsn+0x2e8/0x340 [xfs] [10679.530008] [<ffffffffb92cf1b0>] ? wake_up_state+0x20/0x20 [10679.530038] [<ffffffffc05eeb97>] xfs_file_fsync+0x107/0x1e0 [xfs] [10679.530042] [<ffffffffb944f0e7>] do_fsync+0x67/0xb0 [10679.530046] [<ffffffffb992076f>] ? system_call_after_swapgs+0xbc/ 0x160 [10679.530050] [<ffffffffb944f3f3>] SyS_fdatasync+0x13/0x20 [10679.530054] [<ffffffffb992082f>] system_call_fastpath+0x1c/0x21 [10679.530058] [<ffffffffb992077b>] ? system_call_after_swapgs+0xc8/ 0x160 [10679.530062] INFO: task glusteriotwr13:15486 blocked for more than 120 seconds. [10679.531805] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [10679.533732] glusteriotwr13 D ffff9720a83f0000 0 15486 1 0x00000080 [10679.533738] Call Trace: [10679.533747] [<ffffffffb9913f79>] schedule+0x29/0x70 [10679.533799] [<ffffffffc060e388>] _xfs_log_force_lsn+0x2e8/0x340 [xfs] [10679.533806] [<ffffffffb92cf1b0>] ? wake_up_state+0x20/0x20 [10679.533846] [<ffffffffc05eeb97>] xfs_file_fsync+0x107/0x1e0 [xfs] [10679.533852] [<ffffffffb944f0e7>] do_fsync+0x67/0xb0 [10679.533858] [<ffffffffb992076f>] ? system_call_after_swapgs+0xbc/ 0x160 [10679.533863] [<ffffffffb944f3f3>] SyS_fdatasync+0x13/0x20 [10679.533868] [<ffffffffb992082f>] system_call_fastpath+0x1c/0x21 [10679.533873] [<ffffffffb992077b>] ? system_call_after_swapgs+0xc8/ 0x160 [10919.512757] INFO: task glusterclogro:14933 blocked for more than 120 seconds. [10919.514714] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [10919.516663] glusterclogro D ffff97209832bf40 0 14933 1 0x00000080 [10919.516677] Call Trace: [10919.516690] [<ffffffffb9913f79>] schedule+0x29/0x70 [10919.516696] [<ffffffffb99118e9>] schedule_timeout+0x239/0x2c0 [10919.516703] [<ffffffffb951cc04>] ? blk_finish_plug+0x14/0x40 [10919.516768] [<ffffffffc05e9224>] ? _xfs_buf_ioapply+0x334/0x460 [xfs] [10919.516774] [<ffffffffb991432d>] wait_for_completion+0xfd/0x140 [10919.516782] [<ffffffffb92cf1b0>] ? wake_up_state+0x20/0x20 [10919.516821] [<ffffffffc05eb0a3>] ? _xfs_buf_read+0x23/0x40 [xfs] [10919.516859] [<ffffffffc05eafa9>] xfs_buf_submit_wait+0xf9/0x1d0 [xfs] [10919.516902] [<ffffffffc061b279>] ? xfs_trans_read_buf_map+0x199/0x400 [xfs] [10919.516940] [<ffffffffc05eb0a3>] _xfs_buf_read+0x23/0x40 [xfs] [10919.516977] [<ffffffffc05eb1b9>] xfs_buf_read_map+0xf9/0x160 [xfs] [10919.517022] [<ffffffffc061b279>] xfs_trans_read_buf_map+0x199/0x400 [xfs] [10919.517057] [<ffffffffc05c8d04>] xfs_da_read_buf+0xd4/0x100 [xfs] [10919.517091] [<ffffffffc05c8d53>] xfs_da3_node_read+0x23/0xd0 [xfs] [10919.517126] [<ffffffffc05c9fee>] xfs_da3_node_lookup_int+0x6e/0x2f0 [xfs] [10919.517160] [<ffffffffc05d5a1d>] xfs_dir2_node_lookup+0x4d/0x170 [xfs] [10919.517194] [<ffffffffc05ccf5d>] xfs_dir_lookup+0x1bd/0x1e0 [xfs] [10919.517233] [<ffffffffc05fd8d9>] xfs_lookup+0x69/0x140 [xfs] [10919.517271] [<ffffffffc05fa018>] xfs_vn_lookup+0x78/0xc0 [xfs] [10919.517278] [<ffffffffb9425cf3>] lookup_real+0x23/0x60 [10919.517283] [<ffffffffb9426702>] __lookup_hash+0x42/0x60 [10919.517288] [<ffffffffb942d519>] SYSC_renameat2+0x3a9/0x5a0 [10919.517296] [<ffffffffb94d3753>] ? selinux_file_free_security+0x2 3/0x30 [10919.517304] [<ffffffffb992077b>] ? system_call_after_swapgs+0xc8/ 0x160 [10919.517309] [<ffffffffb992076f>] ? system_call_after_swapgs+0xbc/ 0x160 [10919.517313] [<ffffffffb992077b>] ? system_call_after_swapgs+0xc8/ 0x160 [10919.517318] [<ffffffffb992076f>] ? system_call_after_swapgs+0xbc/ 0x160 [10919.517323] [<ffffffffb942e58e>] SyS_renameat2+0xe/0x10 [10919.517328] [<ffffffffb942e5ce>] SyS_rename+0x1e/0x20 [10919.517333] [<ffffffffb992082f>] system_call_fastpath+0x1c/0x21 [10919.517339] [<ffffffffb992077b>] ? system_call_after_swapgs+0xc8/ 0x160 [11159.496095] INFO: task glusteriotwr9:15482 blocked for more than 120 seconds. [11159.497546] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [11159.498978] glusteriotwr9 D ffff971fa0fa1fa0 0 15482 1 0x00000080 [11159.498984] Call Trace: [11159.498995] [<ffffffffb9911f00>] ? bit_wait+0x50/0x50 [11159.498999] [<ffffffffb9913f79>] schedule+0x29/0x70 [11159.499003] [<ffffffffb99118e9>] schedule_timeout+0x239/0x2c0 [11159.499056] [<ffffffffc05dd9b7>] ? xfs_iext_bno_to_ext+0xa7/0x1a0 [xfs] [11159.499082] [<ffffffffc05dd43e>] ? xfs_iext_bno_to_irec+0x8e/0xd0 [xfs] [11159.499090] [<ffffffffb92f7a12>] ? ktime_get_ts64+0x52/0xf0 [11159.499093] [<ffffffffb9911f00>] ? bit_wait+0x50/0x50 [11159.499097] [<ffffffffb991348d>] io_schedule_timeout+0xad/0x130 [11159.499101] [<ffffffffb9913528>] io_schedule+0x18/0x20 [11159.499104] [<ffffffffb9911f11>] bit_wait_io+0x11/0x50 [11159.499107] [<ffffffffb9911ac1>] __wait_on_bit_lock+0x61/0xc0 [11159.499113] [<ffffffffb9393634>] __lock_page+0x74/0x90 [11159.499118] [<ffffffffb92bc210>] ? wake_bit_function+0x40/0x40 [11159.499121] [<ffffffffb9394154>] __find_lock_page+0x54/0x70 [11159.499125] [<ffffffffb9394e85>] grab_cache_page_write_begin+0x 55/0xc0 [11159.499130] [<ffffffffb9484b76>] iomap_write_begin+0x66/0x100 [11159.499135] [<ffffffffb9484edf>] iomap_write_actor+0xcf/0x1d0 [11159.499140] [<ffffffffb9484e10>] ? iomap_write_end+0x80/0x80 [11159.499144] [<ffffffffb94854e7>] iomap_apply+0xb7/0x150 [11159.499149] [<ffffffffb9485621>] iomap_file_buffered_write+0xa1 /0xe0 [11159.499153] [<ffffffffb9484e10>] ? iomap_write_end+0x80/0x80 [11159.499182] [<ffffffffc05f025d>] xfs_file_buffered_aio_write+0x12d/0x2c0 [xfs] [11159.499213] [<ffffffffc05f057d>] xfs_file_aio_write+0x18d/0x1b0 [xfs] [11159.499217] [<ffffffffb941a533>] do_sync_write+0x93/0xe0 [11159.499222] [<ffffffffb941b010>] vfs_write+0xc0/0x1f0 [11159.499225] [<ffffffffb941c002>] SyS_pwrite64+0x92/0xc0 [11159.499230] [<ffffffffb992076f>] ? system_call_after_swapgs+0xbc/ 0x160 [11159.499234] [<ffffffffb992082f>] system_call_fastpath+0x1c/0x21 [11159.499238] [<ffffffffb992077b>] ? system_call_after_swapgs+0xc8/ 0x160 [11279.488720] INFO: task xfsaild/dm-10:1134 blocked for more than 120 seconds. [11279.490197] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [11279.491665] xfsaild/dm-10 D ffff9720a8660fd0 0 1134 2 0x00000000 [11279.491671] Call Trace: [11279.491682] [<ffffffffb92a3a2e>] ? try_to_del_timer_sync+0x5e/0x9 0 [11279.491688] [<ffffffffb9913f79>] schedule+0x29/0x70 [11279.491744] [<ffffffffc060de36>] _xfs_log_force+0x1c6/0x2c0 [xfs] [11279.491750] [<ffffffffb92cf1b0>] ? wake_up_state+0x20/0x20 [11279.491783] [<ffffffffc0619fec>] ? xfsaild+0x16c/0x6f0 [xfs] [11279.491817] [<ffffffffc060df5c>] xfs_log_force+0x2c/0x70 [xfs] [11279.491849] [<ffffffffc0619e80>] ? xfs_trans_ail_cursor_first+0x90/0x90 [xfs] [11279.491880] [<ffffffffc0619fec>] xfsaild+0x16c/0x6f0 [xfs] [11279.491913] [<ffffffffc0619e80>] ? xfs_trans_ail_cursor_first+0x90/0x90 [xfs] [11279.491919] [<ffffffffb92bb161>] kthread+0xd1/0xe0 [11279.491926] [<ffffffffb92bb090>] ? insert_kthread_work+0x40/0x40 [11279.491932] [<ffffffffb9920677>] ret_from_fork_nospec_begin+0x2 1/0x21 [11279.491936] [<ffffffffb92bb090>] ? insert_kthread_work+0x40/0x40 [11279.491976] INFO: task glusterclogfsyn:14934 blocked for more than 120 seconds. [11279.493466] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [11279.494952] glusterclogfsyn D ffff97209832af70 0 14934 1 0x00000080 [11279.494957] Call Trace: [11279.494979] [<ffffffffc0309839>] ? __split_and_process_bio+0x2e9/0x520 [dm_mod] [11279.494983] [<ffffffffb9913f79>] schedule+0x29/0x70 [11279.494987] [<ffffffffb99118e9>] schedule_timeout+0x239/0x2c0 [11279.494997] [<ffffffffc0309d98>] ? dm_make_request+0x128/0x1a0 [dm_mod] [11279.495001] [<ffffffffb991348d>] io_schedule_timeout+0xad/0x130 [11279.495005] [<ffffffffb99145ad>] wait_for_completion_io+0xfd/0x 140 [11279.495010] [<ffffffffb92cf1b0>] ? wake_up_state+0x20/0x20 [11279.495016] [<ffffffffb951e574>] blkdev_issue_flush+0xb4/0x110 [11279.495049] [<ffffffffc06064b9>] xfs_blkdev_issue_flush+0x19/0x20 [xfs] [11279.495079] [<ffffffffc05eec40>] xfs_file_fsync+0x1b0/0x1e0 [xfs] [11279.495086] [<ffffffffb944f0e7>] do_fsync+0x67/0xb0 [11279.495090] [<ffffffffb992076f>] ? system_call_after_swapgs+0xbc/ 0x160 [11279.495094] [<ffffffffb944f3d0>] SyS_fsync+0x10/0x20 [11279.495098] [<ffffffffb992082f>] system_call_fastpath+0x1c/0x21 [11279.495102] [<ffffffffb992077b>] ? system_call_after_swapgs+0xc8/ 0x160 [11279.495105] INFO: task glusterposixfsy:14941 blocked for more than 120 seconds. [11279.496606] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [11279.498114] glusterposixfsy D ffff972495f84f10 0 14941 1 0x00000080 [11279.498118] Call Trace: [11279.498134] [<ffffffffc0309839>] ? __split_and_process_bio+0x2e9/0x520 [dm_mod] [11279.498138] [<ffffffffb9913f79>] schedule+0x29/0x70 [11279.498142] [<ffffffffb99118e9>] schedule_timeout+0x239/0x2c0 [11279.498152] [<ffffffffc0309d98>] ? dm_make_request+0x128/0x1a0 [dm_mod] [11279.498156] [<ffffffffb991348d>] io_schedule_timeout+0xad/0x130 [11279.498160] [<ffffffffb99145ad>] wait_for_completion_io+0xfd/0x 140 [11279.498165] [<ffffffffb92cf1b0>] ? wake_up_state+0x20/0x20 [11279.498169] [<ffffffffb951e574>] blkdev_issue_flush+0xb4/0x110 [11279.498202] [<ffffffffc06064b9>] xfs_blkdev_issue_flush+0x19/0x20 [xfs] [11279.498231] [<ffffffffc05eec40>] xfs_file_fsync+0x1b0/0x1e0 [xfs] [11279.498238] [<ffffffffb944f0e7>] do_fsync+0x67/0xb0 [11279.498242] [<ffffffffb992076f>] ? system_call_after_swapgs+0xbc/ 0x160 [11279.498246] [<ffffffffb944f3f3>] SyS_fdatasync+0x13/0x20 [11279.498250] [<ffffffffb992082f>] system_call_fastpath+0x1c/0x21 [11279.498254] [<ffffffffb992077b>] ? system_call_after_swapgs+0xc8/ 0x160 [11279.498257] INFO: task glusteriotwr1:14950 blocked for more than 120 seconds. [11279.499789] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [11279.501343] glusteriotwr1 D ffff97208b6daf70 0 14950 1 0x00000080 [11279.501348] Call Trace: [11279.501353] [<ffffffffb9913f79>] schedule+0x29/0x70 [11279.501390] [<ffffffffc060e388>] _xfs_log_force_lsn+0x2e8/0x340 [xfs] [11279.501396] [<ffffffffb92cf1b0>] ? wake_up_state+0x20/0x20 [11279.501428] [<ffffffffc05eeb97>] xfs_file_fsync+0x107/0x1e0 [xfs] [11279.501432] [<ffffffffb944ef3f>] generic_write_sync+0x4f/0x70 [11279.501461] [<ffffffffc05f0545>] xfs_file_aio_write+0x155/0x1b0 [xfs] [11279.501466] [<ffffffffb941a533>] do_sync_write+0x93/0xe0 [11279.501471] [<ffffffffb941b010>] vfs_write+0xc0/0x1f0 [11279.501475] [<ffffffffb941c002>] SyS_pwrite64+0x92/0xc0 [11279.501479] [<ffffffffb992076f>] ? system_call_after_swapgs+0xbc/ 0x160 [11279.501483] [<ffffffffb992082f>] system_call_fastpath+0x1c/0x21 [11279.501489] [<ffffffffb992077b>] ? system_call_after_swapgs+0xc8/ 0x160 [11279.501493] INFO: task glusteriotwr4:14953 blocked for more than 120 seconds. [11279.503047] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [11279.504630] glusteriotwr4 D ffff972499f2bf40 0 14953 1 0x00000080 [11279.504635] Call Trace: [11279.504640] [<ffffffffb9913f79>] schedule+0x29/0x70 [11279.504676] [<ffffffffc060e388>] _xfs_log_force_lsn+0x2e8/0x340 [xfs] [11279.504681] [<ffffffffb92cf1b0>] ? wake_up_state+0x20/0x20 [11279.504710] [<ffffffffc05eeb97>] xfs_file_fsync+0x107/0x1e0 [xfs] [11279.504714] [<ffffffffb944f0e7>] do_fsync+0x67/0xb0 [11279.504718] [<ffffffffb992076f>] ? system_call_after_swapgs+0xbc/ 0x160 [11279.504722] [<ffffffffb944f3d0>] SyS_fsync+0x10/0x20 [11279.504725] [<ffffffffb992082f>] system_call_fastpath+0x1c/0x21 [11279.504730] [<ffffffffb992077b>] ? system_call_after_swapgs+0xc8/ 0x160 [12127.466494] perf: interrupt took too long (8263 > 8150), lowering kernel.perf_event_max_sample_rate to 24000
-------------------- I think this is the cause of the massive ovirt performance issues irrespective of gluster volume. At the time this happened, I was also ssh'ed into the host, and was doing some rpm querry commands. I had just run rpm -qa |grep glusterfs (to verify what version was actually installed), and that command took almost 2 minutes to return! Normally it takes less than 2 seconds. That is all pure local SSD IO, too....
I'm no expert, but its my understanding that anytime a software causes these kinds of issues, its a serious bug in the software, even if its mis-handled exceptions. Is this correct?
--Jim
On Tue, May 29, 2018 at 3:01 PM, Jim Kusznir <jim@palousetech.com> wrote:
> I think this is the profile information for one of the volumes that > lives on the SSDs and is fully operational with no down/problem disks: > > [root@ovirt2 yum.repos.d]# gluster volume profile data info > Brick: ovirt2.nwfiber.com:/gluster/brick2/data > ---------------------------------------------- > Cumulative Stats: > Block Size: 256b+ 512b+ > 1024b+ > No. of Reads: 983 2696 > 1059 > No. of Writes: 0 1113 > 302 > > Block Size: 2048b+ 4096b+ > 8192b+ > No. of Reads: 852 88608 > 53526 > No. of Writes: 522 812340 > 76257 > > Block Size: 16384b+ 32768b+ > 65536b+ > No. of Reads: 54351 241901 > 15024 > No. of Writes: 21636 8656 > 8976 > > Block Size: 131072b+ > No. of Reads: 524156 > No. of Writes: 296071 > %-latency Avg-latency Min-Latency Max-Latency No. of calls > Fop > --------- ----------- ----------- ----------- ------------ > ---- > 0.00 0.00 us 0.00 us 0.00 us 4189 > RELEASE > 0.00 0.00 us 0.00 us 0.00 us 1257 > RELEASEDIR > 0.00 46.19 us 12.00 us 187.00 us 69 > FLUSH > 0.00 147.00 us 78.00 us 367.00 us 86 > REMOVEXATTR > 0.00 223.46 us 24.00 us 1166.00 us 149 > READDIR > 0.00 565.34 us 76.00 us 3639.00 us 88 > FTRUNCATE > 0.00 263.28 us 20.00 us 28385.00 us 228 > LK > 0.00 98.84 us 2.00 us 880.00 us 1198 > OPENDIR > 0.00 91.59 us 26.00 us 10371.00 us 3853 > STATFS > 0.00 494.14 us 17.00 us 193439.00 us 1171 > GETXATTR > 0.00 299.42 us 35.00 us 9799.00 us 2044 > READDIRP > 0.00 1965.31 us 110.00 us 382258.00 us 321 > XATTROP > 0.01 113.40 us 24.00 us 61061.00 us 8134 > STAT > 0.01 755.38 us 57.00 us 607603.00 us 3196 > DISCARD > 0.05 2690.09 us 58.00 us 2704761.00 us 3206 > OPEN > 0.10 119978.25 us 97.00 us 9406684.00 us 154 > SETATTR > 0.18 101.73 us 28.00 us 700477.00 us 313379 > FSTAT > 0.23 1059.84 us 25.00 us 2716124.00 us 38255 > LOOKUP > 0.47 1024.11 us 54.00 us 6197164.00 us 81455 > FXATTROP > 1.72 2984.00 us 15.00 us 37098954.00 us > 103020 FINODELK > 5.92 44315.32 us 51.00 us 24731536.00 us > 23957 FSYNC > 13.27 2399.78 us 25.00 us 22089540.00 us > 991005 READ > 37.00 5980.43 us 52.00 us 22099889.00 us > 1108976 WRITE > 41.04 5452.75 us 13.00 us 22102452.00 us > 1349053 INODELK > > Duration: 10026 seconds > Data Read: 80046027759 bytes > Data Written: 44496632320 bytes > > Interval 1 Stats: > Block Size: 256b+ 512b+ > 1024b+ > No. of Reads: 983 2696 > 1059 > No. of Writes: 0 838 > 185 > > Block Size: 2048b+ 4096b+ > 8192b+ > No. of Reads: 852 85856 > 51575 > No. of Writes: 382 705802 > 57812 > > Block Size: 16384b+ 32768b+ > 65536b+ > No. of Reads: 52673 232093 > 14984 > No. of Writes: 13499 4908 > 4242 > > Block Size: 131072b+ > No. of Reads: 460040 > No. of Writes: 6411 > %-latency Avg-latency Min-Latency Max-Latency No. of calls > Fop > --------- ----------- ----------- ----------- ------------ > ---- > 0.00 0.00 us 0.00 us 0.00 us 2093 > RELEASE > 0.00 0.00 us 0.00 us 0.00 us 1093 > RELEASEDIR > 0.00 53.38 us 26.00 us 111.00 us 16 > FLUSH > 0.00 145.14 us 78.00 us 367.00 us 71 > REMOVEXATTR > 0.00 190.96 us 114.00 us 298.00 us 71 > SETATTR > 0.00 213.38 us 24.00 us 1145.00 us 90 > READDIR > 0.00 263.28 us 20.00 us 28385.00 us 228 > LK > 0.00 101.76 us 2.00 us 880.00 us 1093 > OPENDIR > 0.01 93.60 us 27.00 us 10371.00 us 3090 > STATFS > 0.02 537.47 us 17.00 us 193439.00 us 1038 > GETXATTR > 0.03 297.44 us 35.00 us 9799.00 us 1990 > READDIRP > 0.03 2357.28 us 110.00 us 382258.00 us 253 > XATTROP > 0.04 385.93 us 58.00 us 47593.00 us 2091 > OPEN > 0.04 114.86 us 24.00 us 61061.00 us 7715 > STAT > 0.06 444.59 us 57.00 us 333240.00 us 3053 > DISCARD > 0.42 316.24 us 25.00 us 290728.00 us 29823 > LOOKUP > 0.73 257.92 us 54.00 us 344812.00 us 63296 > FXATTROP > 1.37 98.30 us 28.00 us 67621.00 us 313172 > FSTAT > 1.58 2124.69 us 51.00 us 849200.00 us 16717 > FSYNC > 5.73 162.46 us 52.00 us 748492.00 us 794079 > WRITE > 7.19 2065.17 us 16.00 us 37098954.00 us > 78381 FINODELK > 36.44 886.32 us 25.00 us 2216436.00 us 925421 > READ > 46.30 1178.04 us 13.00 us 1700704.00 us 884635 > INODELK > > Duration: 7485 seconds > Data Read: 71250527215 bytes > Data Written: 5119903744 bytes > > Brick: ovirt3.nwfiber.com:/gluster/brick2/data > ---------------------------------------------- > Cumulative Stats: > Block Size: 1b+ > No. of Reads: 0 > No. of Writes: 3264419 > %-latency Avg-latency Min-Latency Max-Latency No. of calls > Fop > --------- ----------- ----------- ----------- ------------ > ---- > 0.00 0.00 us 0.00 us 0.00 us 90 > FORGET > 0.00 0.00 us 0.00 us 0.00 us 9462 > RELEASE > 0.00 0.00 us 0.00 us 0.00 us 4254 > RELEASEDIR > 0.00 50.52 us 13.00 us 190.00 us 71 > FLUSH > 0.00 186.97 us 87.00 us 713.00 us 86 > REMOVEXATTR > 0.00 79.32 us 33.00 us 189.00 us 228 > LK > 0.00 220.98 us 129.00 us 513.00 us 86 > SETATTR > 0.01 259.30 us 26.00 us 2632.00 us 137 > READDIR > 0.02 322.76 us 145.00 us 2125.00 us 321 > XATTROP > 0.03 109.55 us 2.00 us 1258.00 us 1193 > OPENDIR > 0.05 70.21 us 21.00 us 431.00 us 3196 > DISCARD > 0.05 169.26 us 21.00 us 2315.00 us 1545 > GETXATTR > 0.12 176.85 us 63.00 us 2844.00 us 3206 > OPEN > 0.61 303.49 us 90.00 us 3085.00 us 9633 > FSTAT > 2.44 305.66 us 28.00 us 3716.00 us 38230 > LOOKUP > 4.52 266.22 us 55.00 us 53424.00 us 81455 > FXATTROP > 6.96 1397.99 us 51.00 us 64822.00 us 23889 > FSYNC > 16.48 84.74 us 25.00 us 6917.00 us 932592 > WRITE > 30.16 106.90 us 13.00 us 3920189.00 us 1353046 > INODELK > 38.55 1794.52 us 14.00 us 16210553.00 us > 103039 FINODELK > > Duration: 66562 seconds > Data Read: 0 bytes > Data Written: 3264419 bytes > > Interval 1 Stats: > Block Size: 1b+ > No. of Reads: 0 > No. of Writes: 794080 > %-latency Avg-latency Min-Latency Max-Latency No. of calls > Fop > --------- ----------- ----------- ----------- ------------ > ---- > 0.00 0.00 us 0.00 us 0.00 us 2093 > RELEASE > 0.00 0.00 us 0.00 us 0.00 us 1093 > RELEASEDIR > 0.00 70.31 us 26.00 us 125.00 us 16 > FLUSH > 0.00 193.10 us 103.00 us 713.00 us 71 > REMOVEXATTR > 0.01 227.32 us 133.00 us 513.00 us 71 > SETATTR > 0.01 79.32 us 33.00 us 189.00 us 228 > LK > 0.01 259.83 us 35.00 us 1138.00 us 89 > READDIR > 0.03 318.26 us 145.00 us 2047.00 us 253 > XATTROP > 0.04 112.67 us 3.00 us 1258.00 us 1093 > OPENDIR > 0.06 167.98 us 23.00 us 1951.00 us 1014 > GETXATTR > 0.08 70.97 us 22.00 us 431.00 us 3053 > DISCARD > 0.13 183.78 us 66.00 us 2844.00 us 2091 > OPEN > 1.01 303.82 us 90.00 us 3085.00 us 9610 > FSTAT > 3.27 316.59 us 30.00 us 3716.00 us 29820 > LOOKUP > 5.83 265.79 us 59.00 us 53424.00 us 63296 > FXATTROP > 7.95 1373.89 us 51.00 us 64822.00 us 16717 > FSYNC > 23.17 851.99 us 14.00 us 16210553.00 us > 78555 FINODELK > 24.04 87.44 us 27.00 us 6917.00 us 794081 > WRITE > 34.36 111.91 us 14.00 us 984871.00 us 886790 > INODELK > > Duration: 7485 seconds > Data Read: 0 bytes > Data Written: 794080 bytes > > > ----------------------- > Here is the data from the volume that is backed by the SHDDs and has > one failed disk: > [root@ovirt2 yum.repos.d]# gluster volume profile data-hdd info > Brick: 172.172.1.12:/gluster/brick3/data-hdd > -------------------------------------------- > Cumulative Stats: > Block Size: 256b+ 512b+ > 1024b+ > No. of Reads: 1702 86 > 16 > No. of Writes: 0 767 > 71 > > Block Size: 2048b+ 4096b+ > 8192b+ > No. of Reads: 19 51841 > 2049 > No. of Writes: 76 60668 > 35727 > > Block Size: 16384b+ 32768b+ > 65536b+ > No. of Reads: 1744 639 > 1088 > No. of Writes: 8524 2410 > 1285 > > Block Size: 131072b+ > No. of Reads: 771999 > No. of Writes: 29584 > %-latency Avg-latency Min-Latency Max-Latency No. of calls > Fop > --------- ----------- ----------- ----------- ------------ > ---- > 0.00 0.00 us 0.00 us 0.00 us 2902 > RELEASE > 0.00 0.00 us 0.00 us 0.00 us 1517 > RELEASEDIR > 0.00 197.00 us 197.00 us 197.00 us 1 > FTRUNCATE > 0.00 70.24 us 16.00 us 758.00 us 51 > FLUSH > 0.00 143.93 us 82.00 us 305.00 us 57 > REMOVEXATTR > 0.00 178.63 us 105.00 us 712.00 us 60 > SETATTR > 0.00 67.30 us 19.00 us 572.00 us 555 > LK > 0.00 322.80 us 23.00 us 4673.00 us 138 > READDIR > 0.00 336.56 us 106.00 us 11994.00 us 237 > XATTROP > 0.00 84.70 us 28.00 us 1071.00 us 3469 > STATFS > 0.01 387.75 us 2.00 us 146017.00 us 1467 > OPENDIR > 0.01 148.59 us 21.00 us 64374.00 us 4454 > STAT > 0.02 783.02 us 16.00 us 93502.00 us 1902 > GETXATTR > 0.03 1516.10 us 17.00 us 210690.00 us 1364 > ENTRYLK > 0.03 2555.47 us 300.00 us 674454.00 us 1064 > READDIRP > 0.07 85.74 us 19.00 us 68340.00 us 62849 > FSTAT > 0.07 1978.12 us 59.00 us 202596.00 us 2729 > OPEN > 0.22 708.57 us 15.00 us 394799.00 us 25447 > LOOKUP > 5.94 2331.74 us 15.00 us 1099530.00 us 207534 > FINODELK > 7.31 8311.75 us 58.00 us 1800216.00 us 71668 > FXATTROP > 12.49 7735.19 us 51.00 us 3595513.00 us 131642 > WRITE > 17.70 957.08 us 16.00 us 13700466.00 us > 1508160 INODELK > 24.55 2546.43 us 26.00 us 5077347.00 us 786060 > READ > 31.56 49699.15 us 47.00 us 3746331.00 us 51777 > FSYNC > > Duration: 10101 seconds > Data Read: 101562897361 bytes > Data Written: 4834450432 bytes > > Interval 0 Stats: > Block Size: 256b+ 512b+ > 1024b+ > No. of Reads: 1702 86 > 16 > No. of Writes: 0 767 > 71 > > Block Size: 2048b+ 4096b+ > 8192b+ > No. of Reads: 19 51841 > 2049 > No. of Writes: 76 60668 > 35727 > > Block Size: 16384b+ 32768b+ > 65536b+ > No. of Reads: 1744 639 > 1088 > No. of Writes: 8524 2410 > 1285 > > Block Size: 131072b+ > No. of Reads: 771999 > No. of Writes: 29584 > %-latency Avg-latency Min-Latency Max-Latency No. of calls > Fop > --------- ----------- ----------- ----------- ------------ > ---- > 0.00 0.00 us 0.00 us 0.00 us 2902 > RELEASE > 0.00 0.00 us 0.00 us 0.00 us 1517 > RELEASEDIR > 0.00 197.00 us 197.00 us 197.00 us 1 > FTRUNCATE > 0.00 70.24 us 16.00 us 758.00 us 51 > FLUSH > 0.00 143.93 us 82.00 us 305.00 us 57 > REMOVEXATTR > 0.00 178.63 us 105.00 us 712.00 us 60 > SETATTR > 0.00 67.30 us 19.00 us 572.00 us 555 > LK > 0.00 322.80 us 23.00 us 4673.00 us 138 > READDIR > 0.00 336.56 us 106.00 us 11994.00 us 237 > XATTROP > 0.00 84.70 us 28.00 us 1071.00 us 3469 > STATFS > 0.01 387.75 us 2.00 us 146017.00 us 1467 > OPENDIR > 0.01 148.59 us 21.00 us 64374.00 us 4454 > STAT > 0.02 783.02 us 16.00 us 93502.00 us 1902 > GETXATTR > 0.03 1516.10 us 17.00 us 210690.00 us 1364 > ENTRYLK > 0.03 2555.47 us 300.00 us 674454.00 us 1064 > READDIRP > 0.07 85.73 us 19.00 us 68340.00 us 62849 > FSTAT > 0.07 1978.12 us 59.00 us 202596.00 us 2729 > OPEN > 0.22 708.57 us 15.00 us 394799.00 us 25447 > LOOKUP > 5.94 2334.57 us 15.00 us 1099530.00 us 207534 > FINODELK > 7.31 8311.49 us 58.00 us 1800216.00 us 71668 > FXATTROP > 12.49 7735.32 us 51.00 us 3595513.00 us 131642 > WRITE > 17.71 957.08 us 16.00 us 13700466.00 us > 1508160 INODELK > 24.56 2546.42 us 26.00 us 5077347.00 us 786060 > READ > 31.54 49651.63 us 47.00 us 3746331.00 us 51777 > FSYNC > > Duration: 10101 seconds > Data Read: 101562897361 bytes > Data Written: 4834450432 bytes > > > On Tue, May 29, 2018 at 2:55 PM, Jim Kusznir <jim@palousetech.com> > wrote: > >> Thank you for your response. >> >> I have 4 gluster volumes. 3 are replica 2 + arbitrator. replica >> bricks are on ovirt1 and ovirt2, arbitrator on ovirt3. The 4th volume is >> replica 3, with a brick on all three ovirt machines. >> >> The first 3 volumes are on an SSD disk; the 4th is on a Seagate >> SSHD (same in all three machines). On ovirt3, the SSHD has reported hard >> IO failures, and that brick is offline. However, the other two replicas >> are fully operational (although they still show contents in the heal info >> command that won't go away, but that may be the case until I replace the >> failed disk). >> >> What is bothering me is that ALL 4 gluster volumes are showing >> horrible performance issues. At this point, as the bad disk has been >> completely offlined, I would expect gluster to perform at normal speed, but >> that is definitely not the case. >> >> I've also noticed that the performance hits seem to come in waves: >> things seem to work acceptably (but slow) for a while, then suddenly, its >> as if all disk IO on all volumes (including non-gluster local OS disk >> volumes for the hosts) pause for about 30 seconds, then IO resumes again. >> During those times, I start getting VM not responding and host not >> responding notices as well as the applications having major issues. >> >> I've shut down most of my VMs and am down to just my essential core >> VMs (shedded about 75% of my VMs). I still am experiencing the same issues. >> >> Am I correct in believing that once the failed disk was brought >> offline that performance should return to normal? >> >> On Tue, May 29, 2018 at 1:27 PM, Alex K <rightkicktech@gmail.com> >> wrote: >> >>> I would check disks status and accessibility of mount points where >>> your gluster volumes reside. >>> >>> On Tue, May 29, 2018, 22:28 Jim Kusznir <jim@palousetech.com> >>> wrote: >>> >>>> On one ovirt server, I'm now seeing these messages: >>>> [56474.239725] blk_update_request: 63 callbacks suppressed >>>> [56474.239732] blk_update_request: I/O error, dev dm-2, sector 0 >>>> [56474.240602] blk_update_request: I/O error, dev dm-2, sector >>>> 3905945472 >>>> [56474.241346] blk_update_request: I/O error, dev dm-2, sector >>>> 3905945584 >>>> [56474.242236] blk_update_request: I/O error, dev dm-2, sector >>>> 2048 >>>> [56474.243072] blk_update_request: I/O error, dev dm-2, sector >>>> 3905943424 >>>> [56474.243997] blk_update_request: I/O error, dev dm-2, sector >>>> 3905943536 >>>> [56474.247347] blk_update_request: I/O error, dev dm-2, sector 0 >>>> [56474.248315] blk_update_request: I/O error, dev dm-2, sector >>>> 3905945472 >>>> [56474.249231] blk_update_request: I/O error, dev dm-2, sector >>>> 3905945584 >>>> [56474.250221] blk_update_request: I/O error, dev dm-2, sector >>>> 2048 >>>> >>>> >>>> >>>> >>>> On Tue, May 29, 2018 at 11:59 AM, Jim Kusznir < >>>> jim@palousetech.com> wrote: >>>> >>>>> I see in messages on ovirt3 (my 3rd machine, the one upgraded to >>>>> 4.2): >>>>> >>>>> May 29 11:54:41 ovirt3 ovs-vsctl: ovs|00001|db_ctl_base|ERR|unix:/var/run/openvswitch/db.sock: >>>>> database connection failed (No such file or directory) >>>>> May 29 11:54:51 ovirt3 ovs-vsctl: ovs|00001|db_ctl_base|ERR|unix:/var/run/openvswitch/db.sock: >>>>> database connection failed (No such file or directory) >>>>> May 29 11:55:01 ovirt3 ovs-vsctl: ovs|00001|db_ctl_base|ERR|unix:/var/run/openvswitch/db.sock: >>>>> database connection failed (No such file or directory) >>>>> (appears a lot). >>>>> >>>>> I also found on the ssh session of that, some sysv warnings >>>>> about the backing disk for one of the gluster volumes (straight replica >>>>> 3). The glusterfs process for that disk on that machine went offline. Its >>>>> my understanding that it should continue to work with the other two >>>>> machines while I attempt to replace that disk, right? Attempted writes >>>>> (touching an empty file) can take 15 seconds, repeating it later will be >>>>> much faster. >>>>> >>>>> Gluster generates a bunch of different log files, I don't know >>>>> what ones you want, or from which machine(s). >>>>> >>>>> How do I do "volume profiling"? >>>>> >>>>> Thanks! >>>>> >>>>> On Tue, May 29, 2018 at 11:53 AM, Sahina Bose <sabose@redhat.com >>>>> > wrote: >>>>> >>>>>> Do you see errors reported in the mount logs for the volume? If >>>>>> so, could you attach the logs? >>>>>> Any issues with your underlying disks. Can you also attach >>>>>> output of volume profiling? >>>>>> >>>>>> On Wed, May 30, 2018 at 12:13 AM, Jim Kusznir < >>>>>> jim@palousetech.com> wrote: >>>>>> >>>>>>> Ok, things have gotten MUCH worse this morning. I'm getting >>>>>>> random errors from VMs, right now, about a third of my VMs have been paused >>>>>>> due to storage issues, and most of the remaining VMs are not performing >>>>>>> well. >>>>>>> >>>>>>> At this point, I am in full EMERGENCY mode, as my production >>>>>>> services are now impacted, and I'm getting calls coming in with problems... >>>>>>> >>>>>>> I'd greatly appreciate help...VMs are running VERY slowly >>>>>>> (when they run), and they are steadily getting worse. I don't know why. I >>>>>>> was seeing CPU peaks (to 100%) on several VMs, in perfect sync, for a few >>>>>>> minutes at a time (while the VM became unresponsive and any VMs I was >>>>>>> logged into that were linux were giving me the CPU stuck messages in my >>>>>>> origional post). Is all this storage related? >>>>>>> >>>>>>> I also have two different gluster volumes for VM storage, and >>>>>>> only one had the issues, but now VMs in both are being affected at the same >>>>>>> time and same way. >>>>>>> >>>>>>> --Jim >>>>>>> >>>>>>> On Mon, May 28, 2018 at 10:50 PM, Sahina Bose < >>>>>>> sabose@redhat.com> wrote: >>>>>>> >>>>>>>> [Adding gluster-users to look at the heal issue] >>>>>>>> >>>>>>>> On Tue, May 29, 2018 at 9:17 AM, Jim Kusznir < >>>>>>>> jim@palousetech.com> wrote: >>>>>>>> >>>>>>>>> Hello: >>>>>>>>> >>>>>>>>> I've been having some cluster and gluster performance issues >>>>>>>>> lately. I also found that my cluster was out of date, and was trying to >>>>>>>>> apply updates (hoping to fix some of these), and discovered the ovirt 4.1 >>>>>>>>> repos were taken completely offline. So, I was forced to begin an upgrade >>>>>>>>> to 4.2. According to docs I found/read, I needed only add the new repo, do >>>>>>>>> a yum update, reboot, and be good on my hosts (did the yum update, the >>>>>>>>> engine-setup on my hosted engine). Things seemed to work relatively well, >>>>>>>>> except for a gluster sync issue that showed up. >>>>>>>>> >>>>>>>>> My cluster is a 3 node hyperconverged cluster. I upgraded >>>>>>>>> the hosted engine first, then engine 3. When engine 3 came back up, for >>>>>>>>> some reason one of my gluster volumes would not sync. Here's sample output: >>>>>>>>> >>>>>>>>> [root@ovirt3 ~]# gluster volume heal data-hdd info >>>>>>>>> Brick 172.172.1.11:/gluster/brick3/data-hdd >>>>>>>>> /cc65f671-3377-494a-a7d4-1d9f7c3ae46c/images/48d7ecb8-7ac5-4 >>>>>>>>> 725-bca5-b3519681cf2f/0d6080b0-7018-4fa3-bb82-1dd9ef07d9b9 >>>>>>>>> /cc65f671-3377-494a-a7d4-1d9f7c3ae46c/images/647be733-f153-4 >>>>>>>>> cdc-85bd-ba72544c2631/b453a300-0602-4be1-8310-8bd5abe00971 >>>>>>>>> /cc65f671-3377-494a-a7d4-1d9f7c3ae46c/images/6da854d1-b6be-4 >>>>>>>>> 46b-9bf0-90a0dbbea830/3c93bd1f-b7fa-4aa2-b445-6904e31839ba >>>>>>>>> /cc65f671-3377-494a-a7d4-1d9f7c3ae46c/images/7f647567-d18c-4 >>>>>>>>> 4f1-a58e-9b8865833acb/f9364470-9770-4bb1-a6b9-a54861849625 >>>>>>>>> /cc65f671-3377-494a-a7d4-1d9f7c3ae46c/images/f3c8e7aa-6ef2-4 >>>>>>>>> 2a7-93d4-e0a4df6dd2fa/2eb0b1ad-2606-44ef-9cd3-ae59610a504b >>>>>>>>> /cc65f671-3377-494a-a7d4-1d9f7c3ae46c/images/b1ea3f62-0f05-4 >>>>>>>>> ded-8c82-9c91c90e0b61/d5d6bf5a-499f-431d-9013-5453db93ed32 >>>>>>>>> /cc65f671-3377-494a-a7d4-1d9f7c3ae46c/images/8c8b5147-e9d6-4 >>>>>>>>> 810-b45b-185e3ed65727/16f08231-93b0-489d-a2fd-687b6bf88eaa >>>>>>>>> /cc65f671-3377-494a-a7d4-1d9f7c3ae46c/images/12924435-b9c2-4 >>>>>>>>> aab-ba19-1c1bc31310ef/07b3db69-440e-491e-854c-bbfa18a7cff2 >>>>>>>>> Status: Connected >>>>>>>>> Number of entries: 8 >>>>>>>>> >>>>>>>>> Brick 172.172.1.12:/gluster/brick3/data-hdd >>>>>>>>> /cc65f671-3377-494a-a7d4-1d9f7c3ae46c/images/48d7ecb8-7ac5-4 >>>>>>>>> 725-bca5-b3519681cf2f/0d6080b0-7018-4fa3-bb82-1dd9ef07d9b9 >>>>>>>>> /cc65f671-3377-494a-a7d4-1d9f7c3ae46c/images/647be733-f153-4 >>>>>>>>> cdc-85bd-ba72544c2631/b453a300-0602-4be1-8310-8bd5abe00971 >>>>>>>>> /cc65f671-3377-494a-a7d4-1d9f7c3ae46c/images/b1ea3f62-0f05-4 >>>>>>>>> ded-8c82-9c91c90e0b61/d5d6bf5a-499f-431d-9013-5453db93ed32 >>>>>>>>> /cc65f671-3377-494a-a7d4-1d9f7c3ae46c/images/6da854d1-b6be-4 >>>>>>>>> 46b-9bf0-90a0dbbea830/3c93bd1f-b7fa-4aa2-b445-6904e31839ba >>>>>>>>> /cc65f671-3377-494a-a7d4-1d9f7c3ae46c/images/7f647567-d18c-4 >>>>>>>>> 4f1-a58e-9b8865833acb/f9364470-9770-4bb1-a6b9-a54861849625 >>>>>>>>> /cc65f671-3377-494a-a7d4-1d9f7c3ae46c/images/8c8b5147-e9d6-4 >>>>>>>>> 810-b45b-185e3ed65727/16f08231-93b0-489d-a2fd-687b6bf88eaa >>>>>>>>> /cc65f671-3377-494a-a7d4-1d9f7c3ae46c/images/12924435-b9c2-4 >>>>>>>>> aab-ba19-1c1bc31310ef/07b3db69-440e-491e-854c-bbfa18a7cff2 >>>>>>>>> /cc65f671-3377-494a-a7d4-1d9f7c3ae46c/images/f3c8e7aa-6ef2-4 >>>>>>>>> 2a7-93d4-e0a4df6dd2fa/2eb0b1ad-2606-44ef-9cd3-ae59610a504b >>>>>>>>> Status: Connected >>>>>>>>> Number of entries: 8 >>>>>>>>> >>>>>>>>> Brick 172.172.1.13:/gluster/brick3/data-hdd >>>>>>>>> /cc65f671-3377-494a-a7d4-1d9f7c3ae46c/images/b1ea3f62-0f05-4 >>>>>>>>> ded-8c82-9c91c90e0b61/d5d6bf5a-499f-431d-9013-5453db93ed32 >>>>>>>>> /cc65f671-3377-494a-a7d4-1d9f7c3ae46c/images/8c8b5147-e9d6-4 >>>>>>>>> 810-b45b-185e3ed65727/16f08231-93b0-489d-a2fd-687b6bf88eaa >>>>>>>>> /cc65f671-3377-494a-a7d4-1d9f7c3ae46c/images/12924435-b9c2-4 >>>>>>>>> aab-ba19-1c1bc31310ef/07b3db69-440e-491e-854c-bbfa18a7cff2 >>>>>>>>> /cc65f671-3377-494a-a7d4-1d9f7c3ae46c/images/f3c8e7aa-6ef2-4 >>>>>>>>> 2a7-93d4-e0a4df6dd2fa/2eb0b1ad-2606-44ef-9cd3-ae59610a504b >>>>>>>>> /cc65f671-3377-494a-a7d4-1d9f7c3ae46c/images/647be733-f153-4 >>>>>>>>> cdc-85bd-ba72544c2631/b453a300-0602-4be1-8310-8bd5abe00971 >>>>>>>>> /cc65f671-3377-494a-a7d4-1d9f7c3ae46c/images/48d7ecb8-7ac5-4 >>>>>>>>> 725-bca5-b3519681cf2f/0d6080b0-7018-4fa3-bb82-1dd9ef07d9b9 >>>>>>>>> /cc65f671-3377-494a-a7d4-1d9f7c3ae46c/images/6da854d1-b6be-4 >>>>>>>>> 46b-9bf0-90a0dbbea830/3c93bd1f-b7fa-4aa2-b445-6904e31839ba >>>>>>>>> /cc65f671-3377-494a-a7d4-1d9f7c3ae46c/images/7f647567-d18c-4 >>>>>>>>> 4f1-a58e-9b8865833acb/f9364470-9770-4bb1-a6b9-a54861849625 >>>>>>>>> Status: Connected >>>>>>>>> Number of entries: 8 >>>>>>>>> >>>>>>>>> --------- >>>>>>>>> Its been in this state for a couple days now, and bandwidth >>>>>>>>> monitoring shows no appreciable data moving. I've tried repeatedly >>>>>>>>> commanding a full heal from all three clusters in the node. Its always the >>>>>>>>> same files that need healing. >>>>>>>>> >>>>>>>>> When running gluster volume heal data-hdd statistics, I see >>>>>>>>> sometimes different information, but always some number of "heal failed" >>>>>>>>> entries. It shows 0 for split brain. >>>>>>>>> >>>>>>>>> I'm not quite sure what to do. I suspect it may be due to >>>>>>>>> nodes 1 and 2 still being on the older ovirt/gluster release, but I'm >>>>>>>>> afraid to upgrade and reboot them until I have a good gluster sync (don't >>>>>>>>> need to create a split brain issue). How do I proceed with this? >>>>>>>>> >>>>>>>>> Second issue: I've been experiencing VERY POOR performance >>>>>>>>> on most of my VMs. To the tune that logging into a windows 10 vm via >>>>>>>>> remote desktop can take 5 minutes, launching quickbooks inside said vm can >>>>>>>>> easily take 10 minutes. On some linux VMs, I get random messages like this: >>>>>>>>> Message from syslogd@unifi at May 28 20:39:23 ... >>>>>>>>> kernel:[6171996.308904] NMI watchdog: BUG: soft lockup - >>>>>>>>> CPU#0 stuck for 22s! [mongod:14766] >>>>>>>>> >>>>>>>>> (the process and PID are often different) >>>>>>>>> >>>>>>>>> I'm not quite sure what to do about this either. My initial >>>>>>>>> thought was upgrad everything to current and see if its still there, but I >>>>>>>>> cannot move forward with that until my gluster is healed... >>>>>>>>> >>>>>>>>> Thanks! >>>>>>>>> --Jim >>>>>>>>> >>>>>>>>> _______________________________________________ >>>>>>>>> Users mailing list -- users@ovirt.org >>>>>>>>> To unsubscribe send an email to users-leave@ovirt.org >>>>>>>>> Privacy Statement: https://www.ovirt.org/site/pri >>>>>>>>> vacy-policy/ >>>>>>>>> oVirt Code of Conduct: https://www.ovirt.org/communit >>>>>>>>> y/about/community-guidelines/ >>>>>>>>> List Archives: https://lists.ovirt.org/archiv >>>>>>>>> es/list/users@ovirt.org/message/3LEV6ZQ3JV2XLAL7NYBTXOYMYUOT >>>>>>>>> IRQF/ >>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>> >>>>>> >>>>> >>>> _______________________________________________ >>>> Users mailing list -- users@ovirt.org >>>> To unsubscribe send an email to users-leave@ovirt.org >>>> Privacy Statement: https://www.ovirt.org/site/privacy-policy/ >>>> oVirt Code of Conduct: https://www.ovirt.org/communit >>>> y/about/community-guidelines/ >>>> List Archives: https://lists.ovirt.org/archiv >>>> es/list/users@ovirt.org/message/ACO7RFSLBSRBAIONIC2HQ6Z24ZDES5MF/ >>>> >>> >> >
_______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/communit y/about/community-guidelines/ List Archives: https://lists.ovirt.org/archiv es/list/users@ovirt.org/message/JKBSLSZFRMFGILXGZB4YAMJIJKEKNGMA/