
Hi Andrew, Yes..both on the same node...but i have 4 nodes of this type in the same cluster....So it should work or not ?? 1. 4 physical nodes with 12 bricks each(distributed replicated)... 2. The same all 4 nodes use for the compute purpose also... Do i still require the VIP...or not ?? because i tested even the mount point node goes down...the VM will not pause and not affect... On Fri, Jul 4, 2014 at 1:18 PM, Andrew Lau <andrew@andrewklau.com> wrote:
Or just localhost as your computer and storage are on the same box.
On Fri, Jul 4, 2014 at 2:48 PM, Punit Dambiwal <hypunit@gmail.com> wrote:
Hi Andrew,
Thanks for the update....that means HA can not work without VIP in the gluster,so better to use the glusterfs with the VIP to take over the ip...in case of any storage node failure...
On Fri, Jul 4, 2014 at 12:35 PM, Andrew Lau <andrew@andrewklau.com> wrote:
Don't forget to take into consideration quroum, that's something people often forget
The reason you're having the current happen, is gluster only uses the initial IP address to get the volume details. After that it'll connect directly to ONE of the servers, so with your 2 storage server case, 50% chance it won't go to paused state.
For the VIP, you could consider CTDB or keepelived, or even just using localhost (as your storage and compute are all on the same machine). For CTDB, checkout http://community.redhat.com/blog/2014/05/ovirt-3-4-glusterized/
I have a BZ open regarding gluster VMs going into paused state and not being resumable, so it's something you should also consider. My case, switch dies, gluster volume goes away, VMs go into paused state but can't be resumed. If you lose one server out of a cluster is a different story though. https://bugzilla.redhat.com/show_bug.cgi?id=1058300
HTH
On Fri, Jul 4, 2014 at 11:48 AM, Punit Dambiwal <hypunit@gmail.com>
wrote:
Hi,
Thanks...can you suggest me any good how to/article for the glusterfs with ovirt...
One strange thing is if i will try both (compute & storage) on the same node...the below quote not happen....
---------------------
Right now, if 10.10.10.2 goes away, all your gluster mounts go away and your VMs get paused because the hypervisors can’t access the storage. Your gluster storage is still fine, but ovirt can’t talk to it because 10.10.10.2 isn’t there. ---------------------
Even the 10.10.10.2 goes down...i can still access the gluster mounts and no VM pause....i can access the VM via ssh...no connection failure.....the connection drop only in case of SPM goes down and the another node will elect as SPM(All the running VM's pause in this condition).
On Fri, Jul 4, 2014 at 4:12 AM, Darrell Budic <darrell.budic@zenfire.com> wrote:
You need to setup a virtual IP to use as the mount point, most people use keepalived to provide a virtual ip via vrrp for this. Setup something like 10.10.10.10 and use that for your mounts.
Right now, if 10.10.10.2 goes away, all your gluster mounts go away
and
your VMs get paused because the hypervisors can’t access the storage. Your gluster storage is still fine, but ovirt can’t talk to it because 10.10.10.2 isn’t there.
If the SPM goes down, it the other hypervisor hosts will elect a new one (under control of the ovirt engine).
Same scenarios if storage & compute are on the same server, you still need a vip address for the storage portion to serve as the mount point so it’s not dependent on any one server.
-Darrell
On Jul 3, 2014, at 1:14 AM, Punit Dambiwal <hypunit@gmail.com> wrote:
Hi,
I have some HA related concern about glusterfs with Ovirt...let say i have 4 storage node with gluster bricks as below :-
1. 10.10.10.1 to 10.10.10.4 with 2 bricks each and i have distributed replicated architecture... 2. Now attached this gluster storge to ovrit-engine with the following mount point 10.10.10.2/vol1 3. In my cluster i have 3 hypervisior hosts (10.10.10.5 to 10.10.10.7) SPM is on 10.10.10.5... 4. What happen if 10.10.10.2 will goes down.....can hypervisior host can still access the storage ?? 5. What happen if SPM goes down ???
Note :- What happen for point 4 &5 ,If storage and Compute both working on the same server.
Thanks, Punit _______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users