On Mon, Mar 13, 2017 at 4:08 PM, Manuel Luis Aznar < manuel.luis.aznar@gmail.com> wrote:
Hello to all there again,
I was having some troubles while installing ovirt Hosted Engine, I took some look at the hosted engine setup logs while I was running the hosted-engine --deploy and I found the following in the ovirt hosted engine setup logs:
lvm requires configuration libvirt is not configured for vdsm yet FAILED: conflicting vdsm and libvirt-qemu tls configuration. vdsm.conf with ssl=True requires the following changes: libvirtd.conf: listen_tcp=0, auth_tcp="sasl", listen_tls=1 qemu.conf: spice_tls=1.
hosted-engine setup is already running vdsm-tool configure --force so it should configure libvirt and qemu for you, not sure why it failed. Could you please attach the logs from the failed hosted-engine-setup run?
When I saw this I stopped the setup and edited this two files (vdsm.conf and qemu.conf) set the stated configurations and run the deploy again. All was fine and I dont have any trouble the installation finished successfully. This was using ovirt-release41-pre.rpm repo.
I will be trying the same installation with ovirt-release41.rpm (when I have time) and I will report what happened.
Thanks for all Manuel Luis Aznar
2017-03-06 1:31 GMT+00:00 Manuel Luis Aznar <manuel.luis.aznar@gmail.com>:
Hey there,
I have been loking around, of course as of now the following I am going to say I suppose is not anything new to you:
This is the status of libvirtd:
â libvirtd.service - Virtualization daemon Loaded: loaded (/usr/lib/systemd/system/libvirtd.service; enabled; vendor preset: enabled) Drop-In: /etc/systemd/system/libvirtd.service.d ââunlimited-core.conf Active: active (running) since lun 2017-03-06 01:25:05 WET; 1min 37s ago Docs: man:libvirtd(8) http://libvirt.org Main PID: 24350 (libvirtd) CGroup: /system.slice/libvirtd.service ââ24350 /usr/sbin/libvirtd --listen
mar 06 01:25:05 host1.bajada.es systemd[1]: Starting Virtualization daemon... mar 06 01:25:05 host1.bajada.es systemd[1]: Started Virtualization daemon.
After looking at the state I fire up the VM engine with the command "hosted-engine --vm-start" and I got the following:
VM exists and is down, destroying it Machine destroyed
ed786811-0321-431e-be4b-2d03764c1b02 Status = WaitForLaunch nicModel = rtl8139,pv statusTime = 4374100040 <(437)%20410-0040> emulatedMachine = pc pid = 0 vmName = HostedEngine devices = [{'index': '2', 'iface': 'ide', 'specParams': {}, 'readonly': 'true', 'deviceId': '506df4eb-e783-4451-a8a6-993fa4dbb381', 'address': {'bus': '1', 'controller': '0', 'type': 'drive', 'target': '0', 'unit': '0'}, 'device': 'cdrom', 'shared': 'false', 'path': '', 'type': 'disk'}, {'index': '0', 'iface': 'virtio', 'format': 'raw', 'bootOrder': '1', 'poolID': '00000000-0000-0000-0000-000000000000', 'volumeID': '2bc39472-1a4b-4c7d-8ef9-1212182ad802', 'imageID': '08288fcf-6b12-4bd1-84d3-259992e7aa6d', 'specParams': {}, 'readonly': 'false', 'domainID': 'f44afe8d-56f9-4e1e-beee-4daa548dbad8', 'optional': 'false', 'deviceId': '08288fcf-6b12-4bd1-84d3-259992e7aa6d', 'address': {'slot': '0x06', 'bus': '0x00', 'domain': '0x0000', 'type': 'pci', 'function': '0x0'}, 'device': 'disk', 'shared': 'exclusive', 'propagateErrors': 'off', 'type': 'disk'}, {'device': 'scsi', 'model': 'virtio-scsi', 'type': 'controller'}, {'nicModel': 'pv', 'macAddr': '00:16:3e:65:a6:4e', 'linkActive': 'true', 'network': 'ovirtmgmt', 'specParams': {}, 'deviceId': '84b82c6c-bcca-4983-82d5-8d1e3ab3811a', 'address': {'slot': '0x03', 'bus': '0x00', 'domain': '0x0000', 'type': 'pci', 'function': '0x0'}, 'device': 'bridge', 'type': 'interface'}, {'device': 'console', 'specParams': {}, 'type': 'console', 'deviceId': '6236af73-8dab-4d14-b950-fb4ad01d4420', 'alias': 'console0'}, {'device': 'vga', 'alias': 'video0', 'type': 'video'}, {'device': 'virtio', 'specParams': {'source': 'random'}, 'model': 'virtio', 'type': 'rng'}] guestDiskMapping = {} vmType = kvm clientIp = displaySecurePort = -1 memSize = 4096 displayPort = -1 cpuType = Broadwell spiceSecureChannels = smain,sdisplay,sinputs,scursor ,splayback,srecord,ssmartcard,susbredir smp = 2 displayIp = 0 display = vnc maxVCpus = 6
After that if I look again at the status of libvirtd I obtain:
â libvirtd.service - Virtualization daemon Loaded: loaded (/usr/lib/systemd/system/libvirtd.service; enabled; vendor preset: enabled) Drop-In: /etc/systemd/system/libvirtd.service.d ââunlimited-core.conf Active: active (running) since lun 2017-03-06 01:25:05 WET; 5min ago Docs: man:libvirtd(8) http://libvirt.org Main PID: 24350 (libvirtd) CGroup: /system.slice/libvirtd.service ââ24350 /usr/sbin/libvirtd --listen
mar 06 01:25:05 host1.bajada.es systemd[1]: Starting Virtualization daemon... mar 06 01:25:05 host1.bajada.es systemd[1]: Started Virtualization daemon. mar 06 01:29:39 host1.bajada.es libvirtd[24350]: libvirt version: 2.0.0, package: 10.el7_3.5 (CentOS BuildSystem <http://bugs.centos.org>, 2017-03-03-02:09:45, c1bm.rdu2.centos.org) mar 06 01:29:39 host1.bajada.es libvirtd[24350]: hostname: host1.bajada.es mar 06 01:29:39 host1.bajada.es libvirtd[24350]: Falló al conectar con el socket de monitor: No existe el proceso mar 06 01:29:39 host1.bajada.es libvirtd[24350]: internal error: process exited while connecting to monitor: Could not access KVM kernel module: Permission denied failed to initialize KVM: Permission denied
So the libvirtd is the problem, as i said this is nothing new to you of course...
Thanks again for any help Manuel
2017-03-05 18:51 GMT+00:00 Manuel Luis Aznar <manuel.luis.aznar@gmail.com
:
Hey there again,
Can you check if you have KVM modules loaded?
In order to check that I fire up the following command: "lsmod | grep kvm"
Result was:
kvm_intel 170181 0 kvm 554609 1 kvm_intel irqbypass 13503 1 kvm
Also check group owner for "/dev/kvm". I fire this: "ls -la /dev/kvm". The result was:
crw-rw-rw-+ 1 root kvm 10, 232 mar 5 03:35 /dev/kvm
Also I check if there were some remain packages pending to install for kvm and qemu and I got:
yum install \*kvm\*
The result is, that the system need to install the following:
Instalando: centos-release-qemu-ev noarch 1.0-1.el7 extras 11 k qemu-guest-agent x86_64 10:2.5.0-3.el7 base 133 k qemu-kvm-ev-debuginfo x86_64 10:2.6.0-28.el7_3.3.1 ovirt-4.0 12 M vdsm-hook-faqemu noarch 4.18.21-1.el7.centos ovirt-4.0 15 k vdsm-hook-qemucmdline noarch 4.18.21-1.el7.centos ovirt-4.0 11 k Instalando para las dependencias: centos-release-virt-common noarch 1-1.el7.centos extras 4.5 k
Checking libvirtd service status I got:
libvirtd.service - Virtualization daemon Loaded: loaded (/usr/lib/systemd/system/libvirtd.service; enabled; vendor preset: enabled) Drop-In: /etc/systemd/system/libvirtd.service.d ââunlimited-core.conf Active: active (running) since dom 2017-03-05 15:56:11 WET; 2h 51min ago Docs: man:libvirtd(8) http://libvirt.org Main PID: 19415 (libvirtd) CGroup: /system.slice/libvirtd.service 19415 /usr/sbin/libvirtd --listen
mar 05 15:56:10 host1.bajada.es systemd[1]: Starting Virtualization daemon... mar 05 15:56:11 host1.bajada.es systemd[1]: Started Virtualization daemon. mar 05 16:00:04 host1.bajada.es libvirtd[19415]: libvirt version: 2.0.0, package: 10.el7_3.5 (CentOS BuildSystem <http://bugs.centos.org>, 2017-03-03-02:09:45, c1bm.rdu2.centos.org) mar 05 16:00:04 host1.bajada.es libvirtd[19415]: hostname: host1.bajada.es mar 05 16:00:04 host1.bajada.es libvirtd[19415]: Failed to connect to the socket monitor: process does not exits
(Fallo al conectar con el socket de monitor: No existe el proceso) mar 05 16:00:04 host1.bajada.es libvirtd[19415]: internal error: process exited while connecting to monitor: Could not access KVM kernel module: Permission denied failed to initialize KVM: Permission denied
Thanks for all in advance I will be waiting for you. Any help appreciated Manuel
2017-03-05 17:33 GMT+00:00 Artyom Lukianov <alukiano@redhat.com>:
I found this one under the vdsm log: libvirtError: internal error: process exited while connecting to monitor: Could not access KVM kernel module: Permission denied failed to initialize KVM: Permission denied Thread-70::INFO::2017-03-05 16:00:04,325::vm::1330::virt.vm::(setDownStatus) vmId=`ed786811-0321-431e-be4b-2d03764c1b02`::Changed state to Down: internal error: process exited while connecting to monitor: Could not access KVM kernel module: Permission denied failed to initialize KVM: Permission denied (code=1) Thread-70::INFO::2017-03-05 16:00:04,325::guestagent::430::virt.vm::(stop) vmId=`ed786811-0321-431e-be4b-2d03764c1b02`::Stopping connection Thread-70::DEBUG::2017-03-05 16:00:04,325::vmchannels::238::vds::(unregister) Delete fileno 52 from listener. Thread-70::DEBUG::2017-03-05 16:00:04,325::vmchannels::66::vds::(_unregister_fd) Failed to unregister FD from epoll (ENOENT): 52 Thread-70::DEBUG::2017-03-05 16:00:04,326::__init__::209::jsonrpc.Notification::(emit) Sending event {"params": {"ed786811-0321-431e-be4b-2d03764c1b02": {"status": "Down", "exitReason": 1, "exitMessage": "internal error: process exited while connecting to monitor: Could not access KVM kernel module: Permission denied\nfailed to initialize KVM: Permission denied", "exitCode": 1}, "notify_time": 4339924730}, "jsonrpc": "2.0", "method": "|virt|VM_status|ed786811-0321-431e-be4b-2d03764c1b02"}
Can you check if you have KVM modules loaded? Also, check group owner for "/dev/kvm". Best Regards
On Sat, Mar 4, 2017 at 4:24 PM, Manuel Luis Aznar < manuel.luis.aznar@gmail.com> wrote:
Hello there again,
The error on the first email was using the repo ovirt-release41.rpm ( http://resources.ovirt.org/pub/yum-repo/ovirt-release41.rpm), so as I were getting the same error again and again I am currently trying with ovirt-release41-snapshot.rpm (http://resources.ovirt.org/pu b/yum-repo/ovirt-release41-snapshot.rpm) and the result is nearly the same.
After creating the VM on the installation I got the same error with the command "systemctl status vdsmd":
mar 04 14:10:19 host1.bajada.es vdsm[20443]: vdsm root ERROR failed to retrieve Hosted Engine HA info
Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/vdsm/host/api.py", line 231, in _getHaInfo stats = instance.get_all_stats() File "/usr/lib/python2.7/site-packa ges/ovirt_hosted_engine_ha/client/client.py", line 102, in get_all_stats with broker.connection(self._retries, self._wait): File "/usr/lib64/python2.7/contextlib.py", line 17, in __enter__ return self.gen.next() File "/usr/lib/python2.7/site-packa ges/ovirt_hosted_engine_ha/lib/brokerlink.py", line 99, in connection self.connect(retries, wait) File "/usr/lib/python2.7/site-packa ges/ovirt_hosted_engine_ha/lib/brokerlink.py", line 78, in connect raise BrokerConnectionError(error_msg) BrokerConnectionError: Failed to connect to broker, the number of errors has exceeded the limit (1)
mar 04 14:10:34 host1.bajada.es vdsm[20443]: vdsm ovirt_hosted_engine_ha.lib.brokerlink.BrokerLink ERROR Failed to connect to broker, the number of errors has exceeded the limit (1)
I have noticed that the ovirt-ha-agent and ovirt-ha-broker services was not running. I guess if this have something to do with the error in vsmd service log.
But in this case the ovirt-hosted-engine-installation prints the vnc connection and I can connect to the engine VM.
Thanks for all in advance Any help would be appreciated Manuel Luis Aznar
2017-03-03 21:48 GMT+00:00 Manuel Luis Aznar < manuel.luis.aznar@gmail.com>:
Hello there,
I am having some trouble when deploying an oVirt 4.1 hosted engine installation.
When I m just to end the installation and the hosted engine setup script is about to start the Vm engine (appliance) it fails saying "The VM is not powring up".
If I double check the service vdsmd i get this error all the time:
vdsm root ERROR failed to retrieve Hosted Engine HA info Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/vdsm/host/api.py", line 231, in _getHaInfo stats = instance.get_all_stats() File "/usr/lib/python2.7/site-packa ges/ovirt_hosted_engine_ha/client/client.py", line 102, in get_all_stats with broker.connection(self._retries, self._wait): File "/usr/lib64/python2.7/contextlib.py", line 17, in __enter__ return self.gen.next() File "/usr/lib/python2.7/site-packa ges/ovirt_hosted_engine_ha/lib/brokerlink.py", line 99, in connection self.connect(retries, wait) File "/usr/lib/python2.7/site-packa ges/ovirt_hosted_engine_ha/lib/brokerlink.py", line 78, in connect raise BrokerConnectionError(error_msg) BrokerConnectionError: Failed to connect to broker, the number of errors has exceeded the limit (1)
Did anyone have experimented the same problem?¿? Any hint on How to solved it?¿? I have tried several times with clean installations and always getting the same...
The host where I am trying to do the installation have CentOS 7...
Thanks for all in advance Will be waiting for any hint to see what I am doing wrong... Manuel Luis Aznar
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users