8:34 a.m.
------=_Part_6839529_667489636.1390458882630
Content-Type: text/plain; charset=utf-8
Content-Transfer-Encoding: 7bit
Hi,
----- Original Message -----
From: "Ted Miller" <tmiller(a)hcjb.org>
To: users(a)ovirt.org
Sent: Wednesday, January 22, 2014 10:35:51 PM
Subject: Re: [Users] fencing: HP ilo100 status does NMI, reboots computer
On 1/22/2014 2:44 PM, Joop wrote:
> Ted Miller wrote:
> > I am having trouble getting fencing to work on my HP DL180 g6 servers.
> > They
> > have ilo100 controllers. The documentation mentions ipmi compliance, but
> > there are problems.
>
> > The ipmilan driver gets a response, but it is the wrong
response. A
> > status
> > request results in the NMI line being asserted, which (in standard PC
> > architecture) is the same as pressing the reset button (which these
> > servers
> > don't have).
>
> Thats weird. I have 2 ML110 G6 desktop servers, as storage
servers, and
> those
> have ilo100 controllers too and I just checked and they are setup as
> ipmilan
> in engine.
> I have used the Test button more than once and never had problems. My
> Summary
> page says:
> IPMI Version: 2.0
> Firmware Version: 4.23
> Hardware Version: 1.0
> Description: ProLiant ML110 G6
> System GUID: 33221100-5544-7766-8899-AABBCCDDEEFF
> Mayb that helps you to track down the problem. If you have got question,
> please ask.
> Joop
Joop, thanks for the info. That tells me I was not totally off track
when I
was trying the ipmilan driver.
I have firmware 4.21 in my controllers. I'll have to see about
updating that.
One thing I have figured out, this problem would not have been so
noticeable,
except that something is causing host s1 to go "non responsive" every few
hours. That provokes a Restart -> Stop -> Status -> Start sequence from the
fencing system.
I will have to deal with what is causing the "non
responsive" condition, but
first I want to work through the fencing problem.
I tried the ilo2 driver, but the test of that produced even more
convulsive
messages from the computer.
Note that lo100 - afaik there no such a thing as ilo100
- is unrelated to iLo (whatever version).
These are two completely different products - lo100 is on the board of some of the
lower-end
DL1xx series (and iirc also available as an add-on card) and iLo is on the board of DL3xx
series servers.
--
Didi
------=_Part_6839529_667489636.1390458882630
Content-Type: text/html; charset=utf-8
Content-Transfer-Encoding: quoted-printable
<html><body><div style=3D"font-family: times new roman, new york,
times, se=
rif; font-size: 12pt; color:
#000000"><div>Hi,</div><div><br></div><hr id=
=3D"zwchr"><blockquote style=3D"border-left:2px solid
#1010FF;margin-left:5=
px;padding-left:5px;color:#000;font-weight:normal;font-style:normal;text-de=
coration:none;font-family:Helvetica,Arial,sans-serif;font-size:12pt;" data-=
mce-style=3D"border-left: 2px solid #1010FF; margin-left: 5px; padding-left=
: 5px; color: #000; font-weight: normal; font-style: normal; text-decoratio=
n: none; font-family: Helvetica,Arial,sans-serif; font-size:
12pt;"><b>From=
: </b>"Ted Miller" &lt;tmiller(a)hcjb.org&gt;<br><b>To:
</b>users(a)ovirt.org<b=
r><b>Sent: </b>Wednesday, January 22, 2014 10:35:51
PM<br><b>Subject: </b>R=
e: [Users] fencing: HP ilo100 status does NMI, reboots
computer<br><div><br=
</div>On 1/22/2014 2:44 PM, Joop wrote:<br><blockquote
cite=3D"mid:52E01FA=
A.2000504(a)xs4all.nl">Ted Miller
wrote:<blockquote cite=3D"mid:52DFE44A.3070=
1(a)hcjb.org">I am having trouble getting fencing to work on my HP DL180 g6 s=
ervers. They have ilo100 controllers. The documentation mention=
s ipmi compliance, but there are problems.<br><br> The ipmilan driver gets =
a response, but it is the wrong response. A status request results in=
the NMI line being asserted, which (in standard PC architecture) is the sa=
me as pressing the reset button (which these servers don't have).<br></bloc=
kquote>Thats weird. I have 2 ML110 G6 desktop servers, as storage servers, =
and those have ilo100 controllers too and I just checked and they are setup=
as ipmilan in engine.<br> I have used the Test button more than once and n=
ever had problems. My Summary page says:<br><table id=3D"Table1"
class=3D"d=
atatable mceItemTable"
cellpadding=3D"5"><tbody><tr><td><strong>IPMI
Versio=
n:</strong></td><td>2.0</td></tr><tr><td><strong>Firmware
Version:</strong>=
</td><td>4.23</td></tr><tr><td><strong>Hardware
Version:</strong></td><td>1=
.0</td></tr><tr><td><strong>Description:</strong></td><td>ProLiant
ML110 G6=
</td></tr><tr><td><strong>System
GUID:</strong></td><td>33221100-5544-7766-=
8899-AABBCCDDEEFF</td></tr></tbody></table><br> Mayb that
helps you to trac=
k down the problem. If you have got question, please ask.<br><br>
Joop<br><=
/blockquote>Joop, thanks for the info. That tells me I was not totall=
y off track when I was trying the ipmilan driver.<br><br> I have firmware 4=
.21 in my controllers. I'll have to see about updating
that.<br><br> =
One thing I have figured out, this problem would not have been so noticeabl=
e, except that something is causing host s1 to go "non responsive" every fe=
w hours. That provokes a Restart -> Stop -> Status -> Start
=
sequence from the fencing system.<br><br> I will have to deal with what is =
causing the "non responsive" condition, but first I want to work through th=
e fencing problem.<br><br> I tried the ilo2 driver, but the test of that pr=
oduced even more convulsive messages from the
computer.</blockquote><div><b=
r></div><div>Note that lo100 - afaik there no such a thing as ilo100 - is
u=
nrelated to iLo (whatever version).</div><div>These are two
completely =
;<span style=3D"font-size: 12pt;">different products - lo100 is on the
boar=
d of some of the lower-end</span></div><div><span
style=3D"font-size: 12pt;=
"> DL1xx series (and iirc also </span><span
style=3D"font-size: 12pt;"=
available as an add-on card) and iLo is on the board of
DL3xx</span></div>=
<div><span style=3D"font-size:
12pt;"> series servers.</span></div><div>-- =
<br></div><div><span
name=3D"x"></span>Didi<span
name=3D"x"></span><br></di=
v><div><br></div></div></body></html>
------=_Part_6839529_667489636.1390458882630--