----- Original Message -----
From: "Lars Nielsen" <lars(a)steinwurf.com>
To: "Yedidyah Bar David" <didi(a)redhat.com>
Cc: users(a)ovirt.org
Sent: Tuesday, January 13, 2015 11:26:55 AM
Subject: Re: [ovirt-users] Host in NonOperational mode ovirtmgmt network missing
On 13/01/15 09:31, Yedidyah Bar David wrote:
> ----- Original Message -----
>> From: "Lars Nielsen" <lars(a)steinwurf.com>
>> To: users(a)ovirt.org
>> Sent: Tuesday, January 13, 2015 10:20:20 AM
>> Subject: [ovirt-users] Host in NonOperational mode ovirtmgmt network
>> missing
>>
>> Hey I am new to oVirt, so please be patient
>>
>> I have a problem, when setting up new hosts.
>> Doing the setup it self no problem, but afterwards the status is set to
>> NonOperational.
>> Do to the network ovirtmgmt is missing on the machine.
>>
>> However I have added the following ifcfg file:
>> ifcfg-ovirtmgmt::
>> DEVICE=ovirtmgmt
>> TYPE=Bridge
>> ONBOOT=yes
>> DELAY=0
>> BOOTPROTO=dhcp
>> IPADDR=192.168.1.10
>> NETMASK=255.255.255.0
>> GATEWAY=192.168.0.1
>>
>> And made the adjustments, so the ifcfg-en1, file looks like this:
>> TYPE="Ethernet"
>> #BOOTPROTO="dhcp"
>> DEFROUTE="yes"
>> IPV4_FAILURE_FATAL="no"
>> IPV6INIT="yes"
>> IPV6_AUTOCONF="yes"
>> IPV6_DEFROUTE="yes"
>> IPV6_PEERDNS="yes"
>> IPV6_PEERROUTES="yes"
>> IPV6_FAILURE_FATAL="no"
>> NAME="em1"
>> UUID="bdc14160-3cb6-48d7-b8b9-a382dc384add"
>> ONBOOT="yes"
>> HWADDR="F8:B1:56:C1:F9:8E"
>> PEERDNS="yes"
>> PEERROUTES="yes"
>> BRIDGE=ovirtmgmt
>>
>>
>> I do realize that, the guides on the web for oVirt set BOOTPROTO to
>> static. But at the office, we do not have the possibility of static IP,
>> at the moment.
>>
>> Can some one please tell me what could be wrong ?
> dhcp should work too. The problem is with NetworkManager.
> You'll need to have static IPs though for the engine to be able to
> contact the hosts (as well as the hosts themselves, for hosted-engine HA
> at least), or you'll have problems if they for some reason get a different
> IP address from your dhcp server.
>
> Please post relevant logs:
> hosts - /var/log/ovirt-hosted-engine*/*, /var/log/vdsm/*
> engine - /var/log/ovirt-engine/*
>
> Thanks and best regards,
Okay something seems to be a food here, because on the server hosting
our oVirt instance. We do not have a /var/log/ovirt-hosted-engine
directory.
I didn't say you should - I wrote a '*' in the end. You should find
/var/log/ovirt-hosted-engine-ha
/var/log/ovirt-hosted-engine-setup
But now I realize you did not mention hosted-engine. Can you detail
a bit your setup? Where is the engine? Where are the hosts? How
did you install and setup?
However the log files from the two other directories, can be found here:
https://dl.dropboxusercontent.com/u/55488/ovirt_ovirtlogs.tar
Please add from engine also /var/log/ovirt-engine/host-deploy/* .
Thanks!
--
Didi