7:08 p.m.
I ran through this again to regenerate the logs. It's been 100% repeatable
for me on a fresh 7.4 install, running 'hosted-engine --deploy' or the
preconfigured storage option in the cockpit oVirt UI. Deploying
hyperconverged from the cockpit UI worked, however. Attaching contents of
/var/log from hosted-engine and the physical host.
This is what I got from 'journalctl -u vdsmd', wasn't reflected in VDSM
logs.
May 01 11:01:27 sum-glovirt-05.dy.gl systemd[1]: Starting Virtual Desktop
Server Manager...
May 01 11:01:27 sum-glovirt-05.dy.gl vdsmd_init_common.sh[15467]: vdsm:
Running mkdirs
May 01 11:01:27 sum-glovirt-05.dy.gl vdsmd_init_common.sh[15467]: vdsm:
Running configure_coredump
May 01 11:01:27 sum-glovirt-05.dy.gl vdsmd_init_common.sh[15467]: vdsm:
Running configure_vdsm_logs
May 01 11:01:27 sum-glovirt-05.dy.gl vdsmd_init_common.sh[15467]: vdsm:
Running wait_for_network
May 01 11:01:27 sum-glovirt-05.dy.gl vdsmd_init_common.sh[15467]: vdsm:
Running run_init_hooks
May 01 11:01:27 sum-glovirt-05.dy.gl vdsmd_init_common.sh[15467]: vdsm:
Running check_is_configured
May 01 11:01:27 sum-glovirt-05.dy.gl vdsmd_init_common.sh[15467]: abrt is
already configured for vdsm
May 01 11:01:27 sum-glovirt-05.dy.gl vdsmd_init_common.sh[15467]: lvm is
configured for vdsm
May 01 11:01:27 sum-glovirt-05.dy.gl vdsmd_init_common.sh[15467]: libvirt
is already configured for vdsm
May 01 11:01:27 sum-glovirt-05.dy.gl vdsmd_init_common.sh[15467]: Current
revision of multipath.conf detected, preserving
May 01 11:01:28 sum-glovirt-05.dy.gl vdsmd_init_common.sh[15467]: schema is
already configuredvdsm: Running validate_configuration
May 01 11:01:28 sum-glovirt-05.dy.gl vdsmd_init_common.sh[15467]: SUCCESS:
ssl configured to true. No conflicts
May 01 11:01:28 sum-glovirt-05.dy.gl vdsmd_init_common.sh[15467]: vdsm:
Running prepare_transient_repository
May 01 11:01:28 sum-glovirt-05.dy.gl vdsmd_init_common.sh[15467]: vdsm:
Running syslog_available
May 01 11:01:28 sum-glovirt-05.dy.gl vdsmd_init_common.sh[15467]: vdsm:
Running nwfilter
May 01 11:01:28 sum-glovirt-05.dy.gl vdsmd_init_common.sh[15467]: libvirt:
Network Filter Driver error : this function is not supported by the
connection driver: virNWFilterLookupByName
May 01 11:01:28 sum-glovirt-05.dy.gl vdsmd_init_common.sh[15467]: libvirt:
Network Filter Driver error : this function is not supported by the
connection driver: virNWFilterDefineXML
May 01 11:01:28 sum-glovirt-05.dy.gl vdsmd_init_common.sh[15467]: Traceback
(most recent call last):
May 01 11:01:28 sum-glovirt-05.dy.gl vdsmd_init_common.sh[15467]: File
"/usr/bin/vdsm-tool", line 219, in main
May 01 11:01:28 sum-glovirt-05.dy.gl vdsmd_init_common.sh[15467]: return
tool_command[cmd]["command"](*args)
May 01 11:01:28 sum-glovirt-05.dy.gl vdsmd_init_common.sh[15467]: File
"/usr/lib/python2.7/site-packages/vdsm/tool/nwfilter.py", line 40, in main
May 01 11:01:28 sum-glovirt-05.dy.gl vdsmd_init_common.sh[15467]:
NoMacSpoofingFilter().defineNwFilter(conn)
May 01 11:01:28 sum-glovirt-05.dy.gl vdsmd_init_common.sh[15467]: File
"/usr/lib/python2.7/site-packages/vdsm/tool/nwfilter.py", line 76, in
defineNwFilter
May 01 11:01:28 sum-glovirt-05.dy.gl vdsmd_init_common.sh[15467]: nwFilter
= conn.nwfilterDefineXML(self.buildFilterXml())
May 01 11:01:28 sum-glovirt-05.dy.gl vdsmd_init_common.sh[15467]: File
"/usr/lib/python2.7/site-packages/vdsm/common/libvirtconnection.py", line
130, in wrapper
May 01 11:01:28 sum-glovirt-05.dy.gl vdsmd_init_common.sh[15467]: ret =
f(*args, **kwargs)
May 01 11:01:28 sum-glovirt-05.dy.gl vdsmd_init_common.sh[15467]: File
"/usr/lib/python2.7/site-packages/vdsm/common/function.py", line 92, in
wrapper
May 01 11:01:28 sum-glovirt-05.dy.gl vdsmd_init_common.sh[15467]: return
func(inst, *args, **kwargs)
May 01 11:01:28 sum-glovirt-05.dy.gl vdsmd_init_common.sh[15467]: File
"/usr/lib64/python2.7/site-packages/libvirt.py", line 4279, in
nwfilterDefineXML
May 01 11:01:28 sum-glovirt-05.dy.gl vdsmd_init_common.sh[15467]: if ret is
None:raise libvirtError('virNWFilterDefineXML() failed', conn=self)
May 01 11:01:28 sum-glovirt-05.dy.gl vdsmd_init_common.sh[15467]:
libvirtError: this function is not supported by the connection driver:
virNWFilterDefineXML
May 01 11:01:28 sum-glovirt-05.dy.gl systemd[1]: vdsmd.service: control
process exited, code=exited status=1
May 01 11:01:28 sum-glovirt-05.dy.gl systemd[1]: Failed to start Virtual
Desktop Server Manager.
May 01 11:01:28 sum-glovirt-05.dy.gl systemd[1]: Unit vdsmd.service entered
failed state.
May 01 11:01:28 sum-glovirt-05.dy.gl systemd[1]: vdsmd.service failed.
May 01 11:01:29 sum-glovirt-05.dy.gl systemd[1]: vdsmd.service holdoff time
over, scheduling restart.
May 01 11:01:29 sum-glovirt-05.dy.gl systemd[1]: start request repeated too
quickly for vdsmd.service
May 01 11:01:29 sum-glovirt-05.dy.gl systemd[1]: Failed to start Virtual
Desktop Server Manager.
May 01 11:01:29 sum-glovirt-05.dy.gl systemd[1]: Unit vdsmd.service entered
failed state.
May 01 11:01:29 sum-glovirt-05.dy.gl systemd[1]: vdsmd.service failed.
On Tue, May 1, 2018 at 10:18 AM, Yaniv Kaul <ykaul(a)redhat.com> wrote:
Can you provide other logs, vdsm log, for example?
The installation of the Engine seem to have succeeded, then it tried to
add the host. It was waiting for quite some time to get the host into 'Up'
state.
If, for example, it was installing packages, and the yum repo was very
slow, that may be a reason.
But there may be many other reasons as well.
Y.
On Tue, May 1, 2018 at 2:43 PM, Paul.LKW <paul.lkw(a)gmail.com> wrote:
> Dear All:
> Recently I just make a try to create a Self-Hosted Engine oVirt but
> unfortunately both two of my box also failed with bad deployment
> experience, first of all the online documentation is wrong under "oVirt
> Self-Hosted Engine Guide" section, it says the deployment script
> "hosted-engine --deploy" will asking for Storage configuration immediately
> but it is not true any more, also on both of my 2 box one is configured
> with bond interface and one not but also failed, in order to separate the
> issue I think better I post the bonded interface one log for all your to
> Ref. first, the script runs at "TASK [Wait for the host to be up]" for
long
> long time then give me the Error
>
> [ ERROR ] fatal: [localhost]: FAILED! => {"ansible_facts":
> {"ovirt_hosts": []}, "attempts": 120, "changed":
false}
> [ INFO ] TASK [include_tasks]
> [ INFO ] ok: [localhost]
> [ INFO ] TASK [Remove local vm dir]
> [ INFO ] changed: [localhost]
> [ INFO ] TASK [Notify the user about a failure]
> [ ERROR ] fatal: [localhost]: FAILED! => {"changed": false,
"msg": "The
> system may not be provisioned according to the playbook results: please
> check the logs for the issue, fix accordingly or re-deploy from scratch.\n"}
> [ ERROR ] [DEPRECATION WARNING]: Using tests as filters is deprecated.
> Instead of using
> [ ERROR ] `result|succeeded` instead use `result is succeeded`. This
> feature will be
> [ ERROR ] removed in version 2.9. Deprecation warnings can be disabled by
> setting
> [ ERROR ] deprecation_warnings=False in ansible.cfg.
> [ ERROR ] [DEPRECATION WARNING]: Using tests as filters is deprecated.
> Instead of using
> [ ERROR ] `result|succeeded` instead use `result is succeeded`. This
> feature will be
> [ ERROR ] removed in version 2.9. Deprecation warnings can be disabled by
> setting
> [ ERROR ] deprecation_warnings=False in ansible.cfg.
> [ ERROR ] Failed to execute stage 'Closing up': Failed executing
> ansible-playbook
> [ INFO ] Stage: Clean up
> [ INFO ] Cleaning temporary resources
> [ INFO ] TASK [Gathering Facts]
> [ INFO ] ok: [localhost]
> [ INFO ] TASK [include_tasks]
> [ INFO ] ok: [localhost]
> [ INFO ] TASK [Remove local vm dir]
> [ INFO ] ok: [localhost]
> [ INFO ] Generating answer file '/var/lib/ovirt-hosted-engine-
> setup/answers/answers-20180501190540.conf'
> [ INFO ] Stage: Pre-termination
> [ INFO ] Stage: Termination
> [ ERROR ] Hosted Engine deployment failed: please check the logs for the
> issue, fix accordingly or re-deploy from scratch.
> Log file is located at /var/log/ovirt-hosted-engine-s
> etup/ovirt-hosted-engine-setup-20180501184459-4v6ctw.log
>
> Attached is the so long LOG.
>
>
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users