Re: [Users] ovirtmgmt not installed

5 Dec 2013


      ----- Original Message -----
...
From: "Pascal Jakobi" <pascal.jakobi@gmail.com>
To: "Antoni Segura Puimedon" <asegurap@redhat.com>
Cc: "Pascal Jakobi" <pjakobi@yahoo.fr>, users@ovirt.org
Sent: Wednesday, December 4, 2013 10:37:22 PM
Subject: Re: [Users] ovirtmgmt not installed
I have done this and it solves the issue.
However, the next issue I found was that the host was not able to join a 3.3
cluster (i.e. the "default" cluster).
At this point, I went back to F18.
Could you paste the output of the 'vdsClient -s localhost getVdsCaps' ?
It contains an element named 'clusterLevels' which specifies the compatibility
of the host (the installed vdsm) to the engine cluster.
...
2013/12/4 Antoni Segura Puimedon < asegurap@redhat.com >
----- Original Message -----
...
From: "Assaf Muller" < amuller@redhat.com >
To: "Pascal Jakobi" < pjakobi@yahoo.fr >
Cc: users@ovirt.org
Sent: Wednesday, December 4, 2013 9:09:18 AM
Subject: Re: [Users] ovirtmgmt not installed
I personally have a F19 host working against 3.3 engine. Could you detail
what doesn't work, and possibly attach engine and VDSM logs when an
operation fails?
It seems to be an instance of
https://bugzilla.redhat.com/show_bug.cgi?id=973179
Anaconda created a wrongly named and wrongly configured ifcfg file.
biosdevname said the device is em1 but the ifcfg file created by anaconda is
ifcfg-eno1 (and the content refers to that name).
The best way to solve this is to create an ifcfg file from scratch like the
following:
DEVICE=em1
BOOTPROTO=dhcp
ONBOOT=yes
NM_CONTROLLED=no
HWADDR=XX:XX:XX:XX:XX:XX # replace X with em1's HWADDR
Then for extra safety, stop and mask Network Manager. And then deploy.
...
Assaf Muller, Cloud Networking Engineer
Red Hat
----- Original Message -----
From: "Pascal Jakobi" < pjakobi@yahoo.fr >
To: users@ovirt.org
Sent: Wednesday, December 4, 2013 8:22:05 AM
Subject: Re: [Users] ovirtmgmt not installed
At the end, I could not make an F19 Fedora host work against a 3.3 engine.
I
suggest someone from the eng team has a look at it. some stuff just does
not
work there.
Therefore, I downgraded the fedora host to F18. On the engine side, I got
the
following error message :
Host lab2 is compatible with versions (3.0,3.1,3.2) and cannot join Cluster
Default which is set to version 3.3.
Don't know what is to be set....
Anyway, I created a 3.2 cluster and installed the host into it. Seems to
work
(the host is up).
Thanks again for support.
Pascal Jakobi
116 rue de Stalingrad
93100 Montreuil, France
Tel : + 33 6 87 47 58 19
@ : pjakobi@yahoo.fr
Le Mardi 3 décembre 2013 14h04, Pascal Jakobi < pjakobi@yahoo.fr > a écrit
:
Will do within a couple of hours.
Many, many thanks
Pascal Jakobi
116 rue de Stalingrad
93100 Montreuil, France
Tel : + 33 6 87 47 58 19
@ : pjakobi@yahoo.fr
Le Mardi 3 décembre 2013 13h43, Antoni Segura Puimedon <
asegurap@redhat.com >
a écrit :
Hi Pacal,
Would you mind joining #ovirt at irc.oftc.net and pinging apuimedo?
I have some questions that could be faster solved online.
Best,
Antoni
----- Original Message -----
...
From: "Pascal Jakobi" < pjakobi@yahoo.fr >
To: "Pascal Jakobi" < pascal.jakobi@gmail.com >, "Moti Asayag" <
masayag@redhat.com >
Cc: users@ovirt.org
Sent: Tuesday, December 3, 2013 1:11:36 PM
Subject: Re: [Users] ovirtmgmt not installed
Still the same, even with networking working like a charm...
Any idea ?
[ root@lab2 vdsm]# vdsClient -s 0 getVdsCaps
HBAInventory = {'FC': [], 'iSCSI': [{'InitiatorName':
'iqn.1994-05.com.redhat:a0bc8a5f9a5d'}]}
ISCSIInitiatorName = 'iqn.1994-05.com.redhat:a0bc8a5f9a5d'
bondings = {'bond0': {'addr': '',
'cfg': {},
'hwaddr': '96:9d:8f:27:e1:8f',
'ipv6addrs': [],
'mtu': '1500',
'netmask': '',
'slaves': []}}
bridges = {}
clusterLevels = ['3.0', '3.1', '3.2', '3.3']
cpuCores = '4'
cpuFlags =
'fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,pdpe1gb,rdtscp,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,xtopology,nonstop_tsc,aperfmperf,eagerfpu,pni,pclmulqdq,dtes64,monitor,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm,pcid,dca,sse4_1,sse4_2,x2apic,popcnt,tsc_deadline_timer,aes,xsave,avx,lahf_lm,ida,arat,epb,xsaveopt,pln,pts,dtherm,tpr_shadow,vnmi,flexpriority,ept,vpid,model_Nehalem,model_Conroe,model_coreduo,model_core2duo,model_Penryn,model_Westmere,model_n270,model_SandyBridge'
cpuModel = 'Intel(R) Xeon(R) CPU E5-1620 0 @ 3.60GHz'
cpuSockets = '1'
cpuSpeed = '3708.000'
cpuThreads = '8'
emulatedMachines = ['pc',
'q35',
'isapc',
'pc-0.10',
'pc-0.11',
'pc-0.12',
'pc-0.13',
'pc-0.14',
'pc-0.15',
'pc-1.0',
'pc-1.1',
'pc-1.2',
'pc-1.3',
'none']
guestOverhead = '65'
hooks = {}
kvmEnabled = 'true'
lastClient = '192.168.1.41'
lastClientIface = 'em1'
management_ip = '0.0.0.0'
memSize = '16001'
netConfigDirty = 'True'
networks = {}
nics = {'em1': {'addr': '192.168.1.42',
'cfg': {},
'hwaddr': '00:1a:6b:51:de:b4',
'ipv6addrs': ['fe80::21a:6bff:fe51:deb4/64'],
'mtu': '1500',
'netmask': '255.255.255.0',
'speed': 100}}
operatingSystem = {'name': 'Fedora', 'release': '4', 'version': '19'}
packages2 = {'kernel': {'buildtime': 1384978944.0,
'release': '200.fc19.x86_64',
'version': '3.11.9'},
'libvirt': {'buildtime': 1384730741,
'release': '2.fc19',
'version': '1.0.5.7'},
'mom': {'buildtime': 1375215820, 'release': '3.fc19', 'version':
'0.3.2'},
'qemu-img': {'buildtime': 1383700301,
'release': '13.fc19',
'version': '1.4.2'},
'qemu-kvm': {'buildtime': 1383700301,
'release': '13.fc19',
'version': '1.4.2'},
'spice-server': {'buildtime': 1383130020,
'release': '3.fc19',
'version': '0.12.4'},
'vdsm': {'buildtime': 1384274283, 'release': '11.fc19', 'version':
'4.13.0'}}
reservedMem = '321'
software_revision = '11'
software_version = '4.13'
supportedENGINEs = ['3.0', '3.1', '3.2', '3.3']
supportedProtocols = ['2.2', '2.3']
uuid = '0A583269-811F-E211-AA06-001A6B51DEB4'
version_name = 'Snow Man'
vlans = {}
vmTypes = ['kvm']
[ root@lab2 vdsm]#
Pascal Jakobi
116 rue de Stalingrad
93100 Montreuil, France
Tel : + 33 6 87 47 58 19
@ : pjakobi@yahoo.fr
Le Lundi 2 décembre 2013 10h31, Pascal Jakobi < pascal.jakobi@gmail.com >
a
écrit :
As a matter of fact, when I installed F19, it created an eno1 device,
aliased
to em1. Don't know why, yet.
Even adding a "GATEWAY" clause in /etc/sysconfig/network does not seem to
change the problem....
Will check how to change the device name.
2013/12/1 Moti Asayag < masayag@redhat.com >
Hi Pascal,
----- Original Message -----
...
From: "Pascal Jakobi" < pascal.jakobi@gmail.com >
To: "Mike Kolesnik" < mkolesni@redhat.com >
Cc: users@ovirt.org , masayag@redhat.com
Sent: Sunday, December 1, 2013 10:58:40 AM
Subject: Re: ovirtmgmt not installed
Mike
Here you go. However, please note that I must investigate the
connection
issue that Alon saw. will do it tomorrow.
Many thanks to you folks.
P
According to the output of 'nics' element, the 'em1' device is missing
his
default gateway entry under the 'cfg' element.
One reason for that can be there is no
'/etc/sysconfig/network-scripts/ifcfg-em1'
file and vdsm fails to obtain the default gateway for it.
Could you create this file by your own and retry installing the host ?
After creating the file (make sure it contains NM_CONTROLLED=no), restart
the
network service
and run 'vdsClient -s 0 getVdsCaps' to make sure 'em1' output contains
the
data its 'cfg' sub-
element.
...
[ root@lab2 ~]# vdsClient -s 0 getVdsCaps
HBAInventory = {'FC': [], 'iSCSI': [{'InitiatorName':
'iqn.1994-05.com.redhat:eea1322229a8'}]}
ISCSIInitiatorName = 'iqn.1994-05.com.redhat:eea1322229a8'
bondings = {'bond0': {'addr': '',
'cfg': {},
'hwaddr': 'fa:7e:79:56:5a:c2',
'ipv6addrs': [],
'mtu': '1500',
'netmask': '',
'slaves': []}}
bridges = {}
clusterLevels = ['3.0', '3.1', '3.2', '3.3']
cpuCores = '4'
cpuFlags =
'fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,pdpe1gb,rdtscp,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,xtopology,nonstop_tsc,aperfmperf,eagerfpu,pni,pclmulqdq,dtes64,monitor,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm,pcid,dca,sse4_1,sse4_2,x2apic,popcnt,tsc_deadline_timer,aes,xsave,avx,lahf_lm,ida,arat,epb,xsaveopt,pln,pts,dtherm,tpr_shadow,vnmi,flexpriority,ept,vpid,model_Nehalem,model_Conroe,model_coreduo,model_core2duo,model_Penryn,model_Westmere,model_n270,model_SandyBridge'
cpuModel = 'Intel(R) Xeon(R) CPU E5-1620 0 @ 3.60GHz'
cpuSockets = '1'
cpuSpeed = '3744.000'
cpuThreads = '8'
emulatedMachines = ['pc',
'q35',
'isapc',
'pc-0.10',
'pc-0.11',
'pc-0.12',
'pc-0.13',
'pc-0.14',
'pc-0.15',
'pc-1.0',
'pc-1.1',
'pc-1.2',
'pc-1.3',
'none']
guestOverhead = '65'
hooks = {}
kvmEnabled = 'false'
lastClient = '192.168.1.41'
lastClientIface = 'em1'
management_ip = '0.0.0.0'
memSize = '16001'
netConfigDirty = 'False'
networks = {}
nics = {'em1': {'addr': '192.168.1.42',
'cfg': {},
'hwaddr': '00:1a:6b:51:de:b4',
'ipv6addrs': ['fe80::21a:6bff:fe51:deb4/64'],
'mtu': '1500',
'netmask': '255.255.255.0',
'speed': 100}}
operatingSystem = {'name': 'Fedora', 'release': '2', 'version': '19'}
packages2 = {'kernel': {'buildtime': 1384978944.0,
'release': '200.fc19.x86_64',
'version': '3.11.9'},
'libvirt': {'buildtime': 1384730741,
'release': '2.fc19',
'version': '1.0.5.7'},
'mom': {'buildtime': 1375215820, 'release': '3.fc19',
'version': '0.3.2'},
'qemu-img': {'buildtime': 1383700301,
'release': '13.fc19',
'version': '1.4.2'},
'qemu-kvm': {'buildtime': 1383700301,
'release': '13.fc19',
'version': '1.4.2'},
'spice-server': {'buildtime': 1383130020,
'release': '3.fc19',
'version': '0.12.4'},
'vdsm': {'buildtime': 1384274283, 'release': '11.fc19',
'version': '4.13.0'}}
reservedMem = '321'
software_revision = '11'
software_version = '4.13'
supportedENGINEs = ['3.0', '3.1', '3.2', '3.3']
supportedProtocols = ['2.2', '2.3']
uuid = '0A583269-811F-E211-AA06-001A6B51DEB4'
version_name = 'Snow Man'
vlans = {}
vmTypes = ['kvm']
2013/12/1 Mike Kolesnik < mkolesni@redhat.com >
...
------------------------------
*Hi there *
Hi Pascal,
*I installed a console on F19, then a F19 host (time 11:09 today).*
*Everything works fine, apart from the installation of the mgmt
network
at
the end. *
*Can someone tell me what's going wrong ?*
Can you please send the output of vdsCaps from the host (vdsClient -s
0
getVdsCaps)?
*Thxs in advance*
*Pascal*
--
*Pascal Jakobi*
116 rue de Stalingrad
93100 Montreuil, France
* +33 6 87 47 58 19 * Pascal.Jakobi@gmail.com
--
Pascal Jakobi
116 rue de Stalingrad
93100 Montreuil, France
+33 6 87 47 58 19
Pascal.Jakobi@gmail.com
_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
...
_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
--
Pascal Jakobi
116 rue de Stalingrad
93100 Montreuil, France
+33 6 87 47 58 19
Pascal.Jakobi@gmail.com
_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users