Re: [Users] vlan on mgmt network

Ok so if you want to set the management network (untagged) and VM networks (tagged) on the same bond, then the management network has to be non-VM. IE: You won't be able to connect instances to the management network.

Assaf Muller, Cloud Networking Engineer Red Hat ----- Original Message ----- From: "William Kwan" <potatok(a)yahoo.com&gt; To: "Assaf Muller" <amuller(a)redhat.com&gt; Cc: users(a)ovirt.org, "Christian Hernandez" <christianh(a)4over.com&gt; Sent: Thursday, January 16, 2014 7:59:46 PM Subject: Re: [Users] vlan on mgmt network Assaf, Thanks a lot. Will I be able to mix tagged and untagged traffic? Example: - bond0 on my two systems are on the management network, untagged - my VMs all have one connection to this management network - I want to setup a new VM with two interfaces, one on the management network, one on the tagged VLAN This will work it out? Thanks Will On Thursday, January 16, 2014 12:26 PM, Assaf Muller <amuller(a)redhat.com&gt; wrote: You can make ovirtmgmt a non-VM, untagged (non-VLAN) network, then place as many VM, tagged networks as you'd like on the same NIC or bond. Here's a working upgrade procedure: 1) Edit ovirtmgmt, mark it as non-VM. 2) Go to all hosts using this network, select Setup Host Networks. You'll see that ovirtmgmt is out of sync. Edit the network and mark sync. Hit ok on the dialog of course :) Step 2 will be done for you automatically when you edit logical networks in oVirt 3.4 3) Create VM, VLAN networks 4) Go to all hosts you wish to place those networks, and drag the new VLAN networks on bond0. You don't need to do any prep work on your hosts before this procedure. oVirt will take care of this stuff for you. Assaf Muller, Cloud Networking Engineer Red Hat ----- Original Message ----- From: "Christian Hernandez" <christianh(a)4over.com&gt; To: "William Kwan" <potatok(a)yahoo.com&gt; Cc: users(a)ovirt.org Sent: Thursday, January 16, 2014 6:36:49 PM Subject: Re: [Users] vlan on mgmt network Assuming it's on the same VLAN... I would make the subinterface (i.e. bond0.1) Thank you, Christian Hernandez 1225 Los Angeles Street Glendale, CA 91204 Phone: 877-782-2737 ext. 4566 Fax: 818-265-3152 christianh(a)4over.com <mailto: christianh(a)4over.com > www.4over.com < http://www.4over.com > On Thu, Jan 16, 2014 at 8:31 AM, William Kwan < potatok(a)yahoo.com > wrote: Hi all, CentOS 6.5 and oVirt 3.3 Let's say I have bond0 (eth0 and eth1) on a management network. Logical network ovirtmgmt is set and working on top of Interfaces bond0. Is it possible to have another Logical network, e.g. ovirt777, on the same Interface bond0? Or I should add a virtual interface, e.g. bond0.1, tie it to VLAN 777 and create logical network with this virtual interface? Wil _______________________________________________ Users mailing list Users(a)ovirt.org http://lists.ovirt.org/mailman/listinfo/users _______________________________________________ Users mailing list Users(a)ovirt.org http://lists.ovirt.org/mailman/listinfo/users _______________________________________________ Users mailing list Users(a)ovirt.org http://lists.ovirt.org/mailman/listinfo/users