Re: [Users] [vdsm] Remove and Add host does not work

On 02/28/2012 06:46 PM, Itamar Heim wrote: > On 02/28/2012 02:48 PM, Deepak C Shetty wrote: >> Hi, >> I had a host managed via OE, completely working fine. Was even able to >> create and run VMs off it. >> I tried removing the host from the OE (put host into maint. mode and >> then remove) and when i re-discover >> the same host, OE just keeps seeing it as Non-responsive. > > what do you mean by "re-discover"? > I just meant that i removed the host and re-added it by selecting "New" on the Hosts tab and putting the IP and hostname. >> >> I am able to ssh into the host and see that none of the vdsm processes >> have been started. >> I tried doing "Confirm host has been rebooted" on the OE, did not help. >> I tried putting >> host into maint. mode and re-activating the host, just doesn't help > > did you do any change to the host? > just removing it from engine shouldn't cause vdsm to know/care and > should work just like before. > Nothing changed on the host. In fact when i removed and added the host back it says everything is installed so does nothing but reboots the host, post reboot vdsm does not start automatically.... and host status is non-responsive on OE