With 10GBE you can reach no more than 1.25GB , so you should enable cluster.choose-local if your disks can squeeze more than that. With Replica 3 , you got 1/3 of total space so it seems normal. You can always expand a distributed-replicated volume as long as you expand with 3 bricks at a time (but you will have to rebalance your volume). Keep the replica set (the 3 bricks) of the same size or you will waste space. Best Regards, Strahil Nikolov В четвъртък, 3 декември 2020 г., 21:29:16 Гринуич+2, cpo cpo <dofranklin@port-orange.org> написа: Thanks for info. My storage network speed is 10gb. I rolled out a config where I created 2 domains 1 for and engine the other for vmstore. I decided not to use dedup. I kept my 3 disk on each host non raided. For my vmstore domain I created 9 bricks 1 for each physical disk with a LV size of 6.6tb I created the bricks using the gui wizard. The management engine says I have 19tb of useable space and my vmstore volume is distributed replicate. Would it be ok to create more bricks for this domain with 6.6 TB LV size or will I run into issues with physical space? The reason why I ask is the having 40TB of physical space and only getting 20 TB usable space in my current config gives me a little heart burn. Thanks _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/KBBDIQ42YIWHJQ...