On Wed, Jul 9, 2014 at 12:23 AM, Sandro Bonazzola <sbonazzo@redhat.com> wrote:
Il 07/07/2014 15:38, Simone Marchioni ha scritto:
Hi,
I'm trying to install oVirt 3.4 + gluster looking at the following guides:
http://community.redhat.com/blog/2014/05/ovirt-3-4-glusterized/ http://community.redhat.com/blog/2014/03/up-and-running-with-ovirt-3-4/
It went smooth until the hosted engine VM configuration: I can reach it by VNC and the host IP, but I can't configure the VM network in a way it works. Probably the problem is the assumption that the three hosts (2 hosts + the hosted engine) are on the same subnet sharing the same default gateway.
But my server is on OVH with the subnet 94.23.2.0/24 and my failover IPs are on the subnet 46.105.224.236/30, and my hosted engine need to use one IP of the last ones.
Anyone installed oVirt in such a configuration and can give me any tip?
Never tested such configuration. Andrew, something similar at your installation with an additional NIC?
If I understand correctly, you have your hosts on the 94.23.2.0/24 subnet but you need your hosted engine to be accessible as an address within 46.105.224.236? If that's true, then the easiest way to do it is simply run your hosted-engine install with the hosted-engine first on 94.23.2.0/24, you then add another nic to that hosted-engine VM which'll have the IP address for 46.105.224.237 (?)... alternatively, you could just use a nic alias? If you want to add an extra NIC to your hosted-engine to do that above scenario, here's a snippet from my notes: (storage_network is a bridge, replace that with ovirtmgmt or another bridge you may have created) hosted-engine --set-maintenance --mode=global # On all installed hosts nano /etc/ovirt-hosted-engine/vm.conf # insert under earlier nicModel # replace macaddress and uuid from above # increment slot devices={nicModel:pv,macAddr:00:16:3e:e1:7b:14,linkActive:true,network:storage_network,filter:vdsm-no-mac-spoofing,specParams:{},deviceId:fdb11208-a888-e587-6053-32c9c0361f96,address:{bus:0x00,slot:0x04, domain:0x0000, type:pci,function:0x0},device:bridge,type:interface} hosted-engine --vm-shutdown hosted-engine --vm-start hosted-engine --set-maintenance --mode=none Although, re-reading your question, what do you mean by 'but I can't configure the VM network in a way it works.' ? Does the setup fail, or just when you create a VM you don't have any network connectivity..
Thanks Simone _______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
-- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com